From 84ad688473bec2875e171b71040eb9e033c6c206 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 12 Apr 2010 22:28:11 -0500 Subject: arm: Move cpu/$CPU to arch/arm/cpu/$CPU Signed-off-by: Peter Tyser --- cpu/ixp/npe/include/IxNpeDl.h | 980 ------------------------------------------ 1 file changed, 980 deletions(-) delete mode 100644 cpu/ixp/npe/include/IxNpeDl.h (limited to 'cpu/ixp/npe/include/IxNpeDl.h') diff --git a/cpu/ixp/npe/include/IxNpeDl.h b/cpu/ixp/npe/include/IxNpeDl.h deleted file mode 100644 index 86f69f4..0000000 --- a/cpu/ixp/npe/include/IxNpeDl.h +++ /dev/null @@ -1,980 +0,0 @@ -/** - * @file IxNpeDl.h - * - * @date 14 December 2001 - - * @brief This file contains the public API of the IXP400 NPE Downloader - * component. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @par - * -- End of Copyright Notice -- -*/ - -/** - * @defgroup IxNpeDl IXP400 NPE-Downloader (IxNpeDl) API - * - * @brief The Public API for the IXP400 NPE Downloader - * - * @{ - */ - -#ifndef IXNPEDL_H -#define IXNPEDL_H - -/* - * Put the user defined include files required - */ -#include "IxOsalTypes.h" -#include "IxNpeMicrocode.h" - -/* - * #defines for function return types, etc. - */ - -/** - * @def IX_NPEDL_PARAM_ERR - * - * @brief NpeDl function return value for a parameter error - */ -#define IX_NPEDL_PARAM_ERR 2 - -/** - * @def IX_NPEDL_RESOURCE_ERR - * - * @brief NpeDl function return value for a resource error - */ -#define IX_NPEDL_RESOURCE_ERR 3 - -/** - * @def IX_NPEDL_CRITICAL_NPE_ERR - * - * @brief NpeDl function return value for a Critical NPE error occuring during - download. Assume NPE is left in unstable condition if this value is - returned or NPE is hang / halt. - */ -#define IX_NPEDL_CRITICAL_NPE_ERR 4 - -/** - * @def IX_NPEDL_CRITICAL_MICROCODE_ERR - * - * @brief NpeDl function return value for a Critical Microcode error - * discovered during download. Assume NPE is left in unstable condition - * if this value is returned. - */ -#define IX_NPEDL_CRITICAL_MICROCODE_ERR 5 - -/** - * @def IX_NPEDL_DEVICE_ERR - * - * @brief NpeDl function return value when image being downloaded - * is not meant for the device in use - */ -#define IX_NPEDL_DEVICE_ERR 6 - -/** - * @defgroup NPEImageID IXP400 NPE Image ID Definition - * - * @ingroup IxNpeDl - * - * @brief Definition of NPE Image ID to be passed to ixNpeDlNpeInitAndStart() - * as input of type UINT32 which has the following fields format: - * - * Field [Bit Location]
- * --------------------
- * Device ID [31 - 28]
- * NPE ID [27 - 24]
- * NPE Functionality ID [23 - 16]
- * Major Release Number [15 - 8]
- * Minor Release Number [7 - 0]
- * - * - * @{ - */ - -/** - * @def IX_NPEDL_NPEIMAGE_FIELD_MASK - * - * @brief Mask for NPE Image ID's Field - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IX_NPEDL_NPEIMAGE_FIELD_MASK 0xff - -/** - * @def IX_NPEDL_NPEIMAGE_NPEID_MASK - * - * @brief Mask for NPE Image NPE ID's Field - * - */ -#define IX_NPEDL_NPEIMAGE_NPEID_MASK 0xf - -/** - * @def IX_NPEDL_NPEIMAGE_DEVICEID_MASK - * - * @brief Mask for NPE Image Device ID's Field - * - */ -#define IX_NPEDL_NPEIMAGE_DEVICEID_MASK 0xf - -/** - * @def IX_NPEDL_NPEIMAGE_BIT_LOC_NPEID - * - * @brief Location of NPE ID field in term of bit. - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IX_NPEDL_NPEIMAGE_BIT_LOC_NPEID 24 - -/** - * @def IX_NPEDL_NPEIMAGE_BIT_LOC_FUNCTIONALITYID - * - * @brief Location of Functionality ID field in term of bit. - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IX_NPEDL_NPEIMAGE_BIT_LOC_FUNCTIONALITYID 16 - -/** - * @def IX_NPEDL_NPEIMAGE_BIT_LOC_MAJOR - * - * @brief Location of Major Release Number field in term of bit. - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IX_NPEDL_NPEIMAGE_BIT_LOC_MAJOR 8 - -/** - * @def IX_NPEDL_NPEIMAGE_BIT_LOC_MINOR - * - * @brief Location of Minor Release Number field in term of bit. - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IX_NPEDL_NPEIMAGE_BIT_LOC_MINOR 0 - -/** - * @} addtogroup NPEImageID - */ - -/** - * @def ixNpeDlMicrocodeImageOverride(x) - * - * @brief Map old terminology that uses term "image" to new term - * "image library" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define ixNpeDlMicrocodeImageOverride(x) ixNpeDlMicrocodeImageLibraryOverride(x) - -/** - * @def IxNpeDlVersionId - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IxNpeDlVersionId IxNpeDlImageId - -/** - * @def ixNpeDlVersionDownload - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define ixNpeDlVersionDownload(x,y) ixNpeDlImageDownload(x,y) - -/** - * @def ixNpeDlAvailableVersionsCountGet - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define ixNpeDlAvailableVersionsCountGet(x) ixNpeDlAvailableImagesCountGet(x) - -/** - * @def ixNpeDlAvailableVersionsListGet - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define ixNpeDlAvailableVersionsListGet(x,y) ixNpeDlAvailableImagesListGet(x,y) - - /** - * @def ixNpeDlLoadedVersionGet - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define ixNpeDlLoadedVersionGet(x,y) ixNpeDlLoadedImageGet(x,y) - - /** - * @def clientImage - * - * @brief Map old terminology that uses term "image" to new term - * "image library" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define clientImage clientImageLibrary - - /** - * @def versionIdPtr - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define versionIdPtr imageIdPtr - - /** - * @def numVersionsPtr - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define numVersionsPtr numImagesPtr - -/** - * @def versionIdListPtr - * - * @brief Map old terminology that uses term "version" to new term - * "image" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define versionIdListPtr imageIdListPtr - -/** - * @def IxNpeDlBuildId - * - * @brief Map old terminology that uses term "buildId" to new term - * "functionalityId" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IxNpeDlBuildId IxNpeDlFunctionalityId - -/** - * @def buildId - * - * @brief Map old terminology that uses term "buildId" to new term - * "functionalityId" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define buildId functionalityId - -/** - * @def IX_NPEDL_MicrocodeImage - * - * @brief Map old terminology that uses term "image" to new term - * "image library" - * - * @warning THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -#define IX_NPEDL_MicrocodeImage IX_NPEDL_MicrocodeImageLibrary - -/* - * Typedefs - */ - -/** - * @typedef IxNpeDlFunctionalityId - * @brief Used to make up Functionality ID field of Image Id - * - * @warning THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -typedef UINT8 IxNpeDlFunctionalityId; - -/** - * @typedef IxNpeDlMajor - * @brief Used to make up Major Release field of Image Id - * - * @warning THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -typedef UINT8 IxNpeDlMajor; - -/** - * @typedef IxNpeDlMinor - * @brief Used to make up Minor Revision field of Image Id - * - * @warning THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -typedef UINT8 IxNpeDlMinor; - -/* - * Enums - */ - -/** - * @brief NpeId numbers to identify NPE A, B or C - * @note In this context, for IXP425 Silicon (B0):
- * - NPE-A has HDLC, HSS, AAL and UTOPIA Coprocessors.
- * - NPE-B has Ethernet Coprocessor.
- * - NPE-C has Ethernet, AES, DES and HASH Coprocessors.
- * - IXP400 Product Line have different combinations of coprocessors. - */ -typedef enum -{ - IX_NPEDL_NPEID_NPEA = 0, /**< Identifies NPE A */ - IX_NPEDL_NPEID_NPEB, /**< Identifies NPE B */ - IX_NPEDL_NPEID_NPEC, /**< Identifies NPE C */ - IX_NPEDL_NPEID_MAX /**< Total Number of NPEs */ -} IxNpeDlNpeId; - -/* - * Structs - */ - -/** - * @brief Image Id to identify each image contained in an image library - * - * @warning THIS struct HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart for more information. - */ -typedef struct -{ - IxNpeDlNpeId npeId; /**< NPE ID */ - IxNpeDlFunctionalityId functionalityId; /**< Build ID indicates functionality of image */ - IxNpeDlMajor major; /**< Major Release Number */ - IxNpeDlMinor minor; /**< Minor Revision Number */ -} IxNpeDlImageId; - -/* - * Prototypes for interface functions - */ - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlNpeInitAndStart (UINT32 imageId) - * - * @brief Stop, reset, download microcode (firmware) and finally start NPE. - * - * @param imageId UINT32 [in] - Id of the microcode image to download. - * - * This function locates the image specified by the imageId parameter - * from the default microcode image library which is included internally by - * this component. - * It then stops and resets the NPE, loads the firmware image onto the NPE, - * and then restarts the NPE. - * - * @note A list of valid image IDs is included in this header file. - * See #defines with prefix IX_NPEDL_NPEIMAGE_... - * - * @note This function, along with @ref ixNpeDlCustomImageNpeInitAndStart - * and @ref ixNpeDlLoadedImageFunctionalityGet, supercedes the following - * functions which are deprecated and will be removed completely in a - * future release: - * - @ref ixNpeDlImageDownload - * - @ref ixNpeDlAvailableImagesCountGet - * - @ref ixNpeDlAvailableImagesListGet - * - @ref ixNpeDlLatestImageGet - * - @ref ixNpeDlLoadedImageGet - * - @ref ixNpeDlMicrocodeImageLibraryOverride - * - @ref ixNpeDlNpeExecutionStop - * - @ref ixNpeDlNpeStopAndReset - * - @ref ixNpeDlNpeExecutionStart - * - * @pre - * - The Client is responsible for ensuring mutual access to the NPE. - * @post - * - The NPE Instruction Pipeline will be cleared if State Information - * has been downloaded. - * - If the download fails with a critical error, the NPE may - * be left in an ususable state. - * @return - * - IX_SUCCESS if the download was successful; - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during - * download - * - IX_NPEDL_CRITICAL_MICROCODE_ERR if a critical microcode error - * occured during download - * - IX_NPEDL_DEVICE_ERR if the image being loaded is not meant for - * the device currently running. - * - IX_FAIL if NPE is not available or image is failed to be located. - * A warning is issued if the NPE is not present. - */ -PUBLIC IX_STATUS -ixNpeDlNpeInitAndStart (UINT32 npeImageId); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary, - UINT32 imageId) - * - * @brief Stop, reset, download microcode (firmware) and finally start NPE - * - * @param imageId UINT32 [in] - Id of the microcode image to download. - * - * This function locates the image specified by the imageId parameter - * from the specified microcode image library which is pointed to by the - * imageLibrary parameter. - * It then stops and resets the NPE, loads the firmware image onto the NPE, - * and then restarts the NPE. - * - * This is a facility for users who wish to use an image from an external - * library of NPE firmware images. To use a standard image from the - * built-in library, see @ref ixNpeDlNpeInitAndStart instead. - * - * @note A list of valid image IDs is included in this header file. - * See #defines with prefix IX_NPEDL_NPEIMAGE_... - * - * @note This function, along with @ref ixNpeDlNpeInitAndStart - * and @ref ixNpeDlLoadedImageFunctionalityGet, supercedes the following - * functions which are deprecated and will be removed completely in a - * future release: - * - @ref ixNpeDlImageDownload - * - @ref ixNpeDlAvailableImagesCountGet - * - @ref ixNpeDlAvailableImagesListGet - * - @ref ixNpeDlLatestImageGet - * - @ref ixNpeDlLoadedImageGet - * - @ref ixNpeDlMicrocodeImageLibraryOverride - * - @ref ixNpeDlNpeExecutionStop - * - @ref ixNpeDlNpeStopAndReset - * - @ref ixNpeDlNpeExecutionStart - * - * @pre - * - The Client is responsible for ensuring mutual access to the NPE. - * - The image library supplied must be in the correct format for use - * by the NPE Downloader (IxNpeDl) component. Details of the library - * format are contained in the Functional Specification document for - * IxNpeDl. - * @post - * - The NPE Instruction Pipeline will be cleared if State Information - * has been downloaded. - * - If the download fails with a critical error, the NPE may - * be left in an ususable state. - * @return - * - IX_SUCCESS if the download was successful; - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during - * download - * - IX_NPEDL_CRITICAL_MICROCODE_ERR if a critical microcode error - * occured during download - * - IX_NPEDL_DEVICE_ERR if the image being loaded is not meant for - * the device currently running. - * - IX_FAIL if NPE is not available or image is failed to be located. - * A warning is issued if the NPE is not present. - */ -PUBLIC IX_STATUS -ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary, - UINT32 npeImageId); - - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId, - UINT8 *functionalityId) - * - * @brief Gets the functionality of the image last loaded on a particular NPE - * - * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. - * @param functionalityId UINT8* [out] - the functionality ID of the image - * last loaded on the NPE. - * - * This function retrieves the functionality ID of the image most recently - * downloaded successfully to the specified NPE. If the NPE does not contain - * a valid image, this function returns a FAIL status. - * - * @warning This function is not intended for general use, as a knowledge of - * how to interpret the functionality ID is required. As such, this function - * should only be used by other Access Layer components of the IXP400 Software - * Release. - * - * @pre - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL if the NPE does not have a valid image loaded - */ -PUBLIC IX_STATUS -ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId, - UINT8 *functionalityId); - - -/** - * @ingroup IxNpeDl - * - * @fn IX_STATUS ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary) - * - * @brief This instructs NPE Downloader to use client-supplied microcode image library. - * - * @param clientImageLibrary UINT32* [in] - Pointer to the client-supplied - * NPE microcode image library - * - * This function sets NPE Downloader to use a client-supplied microcode image library - * instead of the standard image library which is included by the NPE Downloader. - * This function is provided mainly for increased testability and should not - * be used in normal circumstances. When not used, NPE Downloader will use - * a "built-in" image library, local to this component, which should always contain the - * latest microcode for the NPEs. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - clientImageLibrary should point to a microcode image library valid for use - * by the NPE Downloader component. - * - * @post - * - the client-supplied image library will be used for all subsequent operations - * performed by the NPE Downloader - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL if the client-supplied image library did not contain a valid signature - */ -PUBLIC IX_STATUS -ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, - BOOL verify) - * - * @brief Stop, reset, download microcode and finally start NPE. - * - * @param imageIdPtr @ref IxNpeDlImageId* [in] - Pointer to Id of the microcode - * image to download. - * @param verify BOOL [in] - ON/OFF option to verify the download. If ON - * (verify == TRUE), the Downloader will read back - * each word written to the NPE registers to - * ensure the download operation was successful. - * - * Using the imageIdPtr, this function locates a particular image of - * microcode in the microcode image library in memory, and downloads the microcode - * to a particular NPE. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - The Client is responsible for ensuring mutual access to the NPE. - * - The Client should use ixNpeDlLatestImageGet() to obtain the latest - * version of the image before attempting download. - * @post - * - The NPE Instruction Pipeline will be cleared if State Information - * has been downloaded. - * - If the download fails with a critical error, the NPE may - * be left in an ususable state. - * @return - * - IX_SUCCESS if the download was successful; - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during - * download - * - IX_PARAM_CRITICAL_MICROCODE_ERR if a critical microcode error - * occured during download - * - IX_FAIL if NPE is not available or image is failed to be located. - * A warning is issued if the NPE is not present. - */ -PUBLIC IX_STATUS -ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, - BOOL verify); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr) - * - * @brief Get the number of Images available in a microcode image library - * - * @param numImagesPtr UINT32* [out] - A pointer to the number of images in - * the image library. - * - * Gets the number of images available in the microcode image library. - * Then returns this in a variable pointed to by numImagesPtr. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - The Client should declare the variable to which numImagesPtr points - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL otherwise - */ -PUBLIC IX_STATUS -ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr, - UINT32 *listSizePtr) - * - * @brief Get a list of the images available in a microcode image library - * - * @param imageIdListPtr @ref IxNpeDlImageId* [out] - Array to contain list of - * image Ids (memory - * allocated by Client). - * @param listSizePtr UINT32* [inout] - As an input, this param should point - * to the max number of Ids the - * imageIdListPtr array can - * hold. NpeDl will replace the input - * value of this parameter with the - * number of image Ids actually filled - * into the array before returning. - * - * Finds list of images available in the microcode image library. - * Fills these into the array pointed to by imageIdListPtr - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - The Client should declare the variable to which numImagesPtr points - * - The Client should create an array (imageIdListPtr) large - * enough to contain all the image Ids in the image library - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL otherwise - */ -PUBLIC IX_STATUS -ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr, - UINT32 *listSizePtr); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId, - IxNpeDlImageId *imageIdPtr) - * - * @brief Gets the Id of the image currently loaded on a particular NPE - * - * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. - * @param imageIdPtr @ref IxNpeDlImageId* [out] - Pointer to the where the - * image id should be stored. - * - * If an image of microcode was previously downloaded successfully to the NPE - * by NPE Downloader, this function returns in imageIdPtr the image - * Id of that image loaded on the NPE. - * - * @pre - * - The Client has allocated memory to the imageIdPtr pointer. - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL if the NPE doesn't currently have a image loaded - */ -PUBLIC IX_STATUS -ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId, - IxNpeDlImageId *imageIdPtr); - -/** - * @fn PUBLIC IX_STATUS ixNpeDlLatestImageGet (IxNpeDlNpeId npeId, IxNpeDlFunctionalityId - functionalityId, IxNpeDlImageId *imageIdPtr) - * - * @brief This instructs NPE Downloader to get Id of the latest version for an - * image that is specified by the client. - * - * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. - * @param functionalityId @ref IxNpeDlFunctionalityId [in] - functionality of the image - * @param imageIdPtr @ref IxNpeDlImageId* [out] - Pointer to the where the - * image id should be stored. - * - * This function sets NPE Downloader to return the id of the latest version for - * image. The user will select the image by providing a particular NPE - * (specifying npeId) with particular functionality (specifying - * FunctionalityId). The most recent version available as determined by the - * highest Major and Minor revision numbers is returned in imageIdPtr. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL otherwise - */ -PUBLIC IX_STATUS -ixNpeDlLatestImageGet (IxNpeDlNpeId npeId, - IxNpeDlFunctionalityId functionalityId, - IxNpeDlImageId *imageIdPtr); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId) - * - * @brief Stops and Resets an NPE - * - * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. - * - * This function performs a soft NPE reset by writing reset values to - * particular NPE registers. Note that this does not reset NPE co-processors. - * This implicitly stops NPE code execution before resetting the NPE. - * - * @note It is no longer necessary to call this function before downloading - * a new image to the NPE. It is left on the API only to allow greater control - * of NPE execution if required. Where appropriate, use @ref ixNpeDlNpeInitAndStart - * or @ref ixNpeDlCustomImageNpeInitAndStart instead. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - The Client is responsible for ensuring mutual access to the NPE. - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL otherwise - * - IX_NPEDL_CRITICAL_NPE_ERR failed to reset NPE due to timeout error. - * Timeout error could happen if NPE hang - */ -PUBLIC IX_STATUS -ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId) - * - * @brief Starts code execution on a NPE - * - * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE - * - * Starts execution of code on a particular NPE. A client would typically use - * this after a download to NPE is performed, to start/restart code execution - * on the NPE. - * - * @note It is no longer necessary to call this function after downloading - * a new image to the NPE. It is left on the API only to allow greater control - * of NPE execution if required. Where appropriate, use @ref ixNpeDlNpeInitAndStart - * or @ref ixNpeDlCustomImageNpeInitAndStart instead. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - The Client is responsible for ensuring mutual access to the NPE. - * - Note that this function does not set the NPE Next Program Counter - * (NextPC), so it should be set beforehand if required by downloading - * appropriate State Information (using ixNpeDlVersionDownload()). - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL otherwise - */ -PUBLIC IX_STATUS -ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId) - * - * @brief Stops code execution on a NPE - * - * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE - * - * Stops execution of code on a particular NPE. This would typically be used - * by a client before a download to NPE is performed, to stop code execution on - * an NPE, unless ixNpeDlNpeStopAndReset() is used instead. Unlike - * ixNpeDlNpeStopAndReset(), this function only halts the NPE and leaves - * all registers and settings intact. This is useful, for example, between - * stages of a multi-stage download, to stop the NPE prior to downloading the - * next image while leaving the current state of the NPE intact.. - * - * @warning THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. - * It will be removed in a future release. - * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. - * - * @pre - * - The Client is responsible for ensuring mutual access to the NPE. - * - * @post - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_NPEDL_PARAM_ERR if a parameter error occured - * - IX_FAIL otherwise - */ -PUBLIC IX_STATUS -ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC IX_STATUS ixNpeDlUnload (void) - * - * @brief This function will uninitialise the IxNpeDl component. - * - * This function will uninitialise the IxNpeDl component. It should only be - * called once, and only if the IxNpeDl component has already been initialised by - * calling any of the following functions: - * - @ref ixNpeDlNpeInitAndStart - * - @ref ixNpeDlCustomImageNpeInitAndStart - * - @ref ixNpeDlImageDownload (deprecated) - * - @ref ixNpeDlNpeStopAndReset (deprecated) - * - @ref ixNpeDlNpeExecutionStop (deprecated) - * - @ref ixNpeDlNpeExecutionStart (deprecated) - * - * If possible, this function should be called before a soft reboot or unloading - * a kernel module to perform any clean up operations required for IxNpeDl. - * - * The following actions will be performed by this function: - * - Unmapping of any kernel memory mapped by IxNpeDl - * - * @return - * - IX_SUCCESS if the operation was successful - * - IX_FAIL otherwise - */ - -PUBLIC IX_STATUS -ixNpeDlUnload (void); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC void ixNpeDlStatsShow (void) - * - * @brief This function will display run-time statistics from the IxNpeDl - * component - * - * @return none - */ -PUBLIC void -ixNpeDlStatsShow (void); - -/** - * @ingroup IxNpeDl - * - * @fn PUBLIC void ixNpeDlStatsReset (void) - * - * @brief This function will reset the statistics of the IxNpeDl component - * - * @return none - */ -PUBLIC void -ixNpeDlStatsReset (void); - -#endif /* IXNPEDL_H */ - -/** - * @} defgroup IxNpeDl - */ - - -- cgit v1.1