From 92988a21ad4c4c9504295ccb580c9f806134471b Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 26 Mar 2012 20:55:28 +0200 Subject: added boot script files to repository --- include/configs/at91rm9200ek.h | 231 ----------------------------------------- 1 file changed, 231 deletions(-) delete mode 100644 include/configs/at91rm9200ek.h (limited to 'include/configs/at91rm9200ek.h') diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h deleted file mode 100644 index 810023a..0000000 --- a/include/configs/at91rm9200ek.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2010 Andreas Bießmann - * - * based on previous work by - * - * Ulf Samuelsson - * Rick Bronson - * - * Configuration settings for the AT91RM9200EK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __AT91RM9200EK_CONFIG_H__ -#define __AT91RM9200EK_CONFIG_H__ - -#include - -/* - * set some initial configurations depending on configure target - * - * at91rm9200ek_config -> boot from 0x0 in NOR Flash at CS0 - * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel - * initialisation was done by some preloader - */ -#ifdef CONFIG_RAMBOOT -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x20100000 -#else -#define CONFIG_SYS_TEXT_BASE 0x10000000 -#endif - -/* - * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz - * AT91C_MAIN_CLOCK is the frequency of PLLA output - * AT91C_MASTER_CLOCK is the peripherial clock - * CONFIG_SYS_HZ_CLOCK is the value for CCR in tc0 (divider 2 is implicitely - * set in arch/arm/cpu/arm920t/at91/timer.c) - * CONFIG_SYS_HZ is the tick rate for timer tc0 - */ -#define AT91C_XTAL_CLOCK 18432000 -#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 ) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000 - -/* CPU configuration */ -#define CONFIG_ARM920T -#define CONFIG_AT91RM9200 -#define CONFIG_AT91RM9200EK -#define CONFIG_CPUAT91 -#define USE_920T_MMU - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_AT91FAMILY - -/* - * Memory Configuration - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE SZ_32M - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - SZ_256K) - -/* - * LowLevel Init - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 (CONFIG_SYS_SDRAM_BASE+0x80) -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - * Hardware drivers - */ -/* - * Choose a USART for serial console - * CONFIG_DBGU is DBGU unit on J10 - * CONFIG_USART1 is USART1 on J14 - */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU - -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } -#define CONFIG_BAUDRATE 115200 - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#undef CONFIG_CMD_FPGA - -/* - * Network Driver Setting - */ -#define CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RMII -#define CONFIG_MII - -/* - * NOR Flash - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE -#define PHYS_FLASH_SIZE SZ_8M -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * USB Config - */ -#define CONFIG_USB_ATMEL 1 -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_KEYBOARD 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 - -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -/* - * Environment Settings - */ -#define CONFIG_ENV_IS_IN_FLASH - -/* - * after u-boot.bin - */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE SZ_64K /* sectors are 64K here */ -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN SZ_256K - -/* - * Boot option - */ -#define CONFIG_BOOTDELAY 3 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_16M -#define CONFIG_ENV_OVERWRITE - -/* - * Shell Settings - */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + SZ_128K, \ - SZ_4K) -/* size in bytes reserved for initial data */ - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_STACKSIZE SZ_32K /* regular stack */ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* Unsure if to big or to small*/ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* Unsure if to big or to small*/ -#endif /* __AT91RM9200EK_CONFIG_H__ */ -- cgit v1.1