From 92988a21ad4c4c9504295ccb580c9f806134471b Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 26 Mar 2012 20:55:28 +0200 Subject: added boot script files to repository --- include/configs/eXalion.h | 455 ---------------------------------------------- 1 file changed, 455 deletions(-) delete mode 100644 include/configs/eXalion.h (limited to 'include/configs/eXalion.h') diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h deleted file mode 100644 index 61f34dd..0000000 --- a/include/configs/eXalion.h +++ /dev/null @@ -1,455 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC824X 1 -/* #define CONFIG_MPC8240 1 */ -#define CONFIG_MPC8245 1 -#define CONFIG_EXALION 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#if defined (CONFIG_MPC8240) - /* #warning ---------- eXalion with MPC8240 --------------- */ -#elif defined (CONFIG_MPC8245) - /* #warning ++++++++++ eXalion with MPC8245 +++++++++++++++ */ -#elif defined (CONFIG_MPC8245) && defined (CONFIG_MPC8245) -#error #### Both types of MPC824x defined (CONFIG_8240 and CONFIG_8245) -#else -#error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif -/* older kernels need clock in MHz newer in Hz */ - /* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz */ -#undef CONFIG_CLOCKS_IN_MHZ - -#define CONFIG_BOOTDELAY 10 - - - /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_PCI - - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 8 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CONFIG_MISC_INIT_R 1 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 1 GBytes - initdram() will */ - /* return real value. */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_DATA_SIZE 128 - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - - -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_FLASH_BASE 0xFFE00000 -#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* onboard 2MByte flash */ -#elif defined (CONFIG_MPC8245) -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_FLASH_SIZE (4 * 1024 * 1024) /* onboard 4MByte flash */ -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of one Flash sector */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for enviroment */ -#define CONFIG_ENV_ADDR 0xFFFC0000 -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -/* #define CONFIG_SYS_ISA_MEM 0xFD000000 */ -#define CONFIG_SYS_ISA_IO 0xFE000000 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE -#define FLASH_BASE1_PRELIM 0 - - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI 1 /* include pci support */ -#undef CONFIG_PCI_PNP - -#define CONFIG_NET_MULTI 1 /* Multi ethernet cards support */ - -#define CONFIG_EEPRO100 1 - -#define PCI_ENET0_MEMADDR 0x80000000 /* Intel 82559ER */ -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET1_MEMADDR 0x81000000 /* Intel 82559ER */ -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET2_MEMADDR 0x82000000 /* Broadcom BCM569xx */ -#define PCI_ENET2_IOADDR 0x82000000 -#define PCI_ENET3_MEMADDR 0x83000000 /* Broadcom BCM56xx */ -#define PCI_ENET3_IOADDR 0x83000000 - -/*----------------------------------------------------------------------- - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 1 -#define CONFIG_SYS_NS16550_SERIAL 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#if (CONFIG_CONS_INDEX == 1) -#define CONFIG_SYS_NS16550_CLK 1843200 /* COM1 only ! */ -#else -#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); }) -#endif - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + 0x3F8) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/*----------------------------------------------------------------------- - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/*----------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ - - /*#define CONFIG_133MHZ_DRAM 1 */ /* For 133 MHZ DRAM only !!!!!!!!!!! */ - -#if defined (CONFIG_MPC8245) -/* Bit-field values for PMCR2. */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_DLL_EXTEND 0x80 /* use DLL extended range - 133MHz only */ -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 /* delay and hold timing - 133MHz only */ -#endif - -/* Bit-field values for MIOCR1. */ -#if !defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_DLL_MAX_DELAY 0x04 /* longer DLL delay line - 66MHz only */ -#endif -/* Bit-field values for MIOCR2. */ -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay */ - /* - note bottom 3 bits MUST be 0 */ -#endif - -/* Bit-field values for MCCR1. */ -#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ - -/* Bit-field values for MCCR2. */ -#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_REFINT 1300 /* no of clock cycles between CBR */ -#else /* refresh cycles */ -#define CONFIG_SYS_REFINT 750 -#endif - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_BSTOPRE 1023 -#else -#define CONFIG_SYS_BSTOPRE 250 -#endif - -/* Bit-field values for MCCR3. */ -/* the following are for SDRAM only */ - -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_REFREC 9 /* Refresh to activate interval */ -#else -#define CONFIG_SYS_REFREC 5 /* Refresh to activate interval */ -#endif -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_RDLAT 2 /* data latency from read command */ -#endif - -/* Bit-field values for MCCR4. */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 7 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 5 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#else -#if 0 -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */ -#endif -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#endif -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ -#define CONFIG_SYS_REGDIMM 0 -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 0 -#elif defined (CONFIG_MPC8245) -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 0 -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif - - -/*----------------------------------------------------------------------- - memory bank settings - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 - -/*----------------------------------------------------------------------- - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_ODCR 0xDF /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#elif defined (CONFIG_MPC8245) -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_ODCR 0xFE /* configures line driver impedances - 133MHz */ -#else -#define CONFIG_SYS_ODCR 0xDE /* configures line driver impedances - 66MHz */ -#endif -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif - -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/*----------------------------------------------------------------------- - * Block Address Translation (BAT) register settings. - */ -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#undef NR_8259_INTS -#define NR_8259_INTS 1 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO /* base address */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ - -#define CONFIG_ATAPI - -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* reset for ide supported... */ -#undef CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ - -/*----------------------------------------------------------------------- - * DISK Partition support - */ -#define CONFIG_DOS_PARTITION - -/*----------------------------------------------------------------------- - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#endif /* __CONFIG_H */ -- cgit v1.1