From f39748ae8edb03017647b0d731cdd06e7bdcde13 Mon Sep 17 00:00:00 2001
From: wdenk <wdenk>
Date: Wed, 9 Jun 2004 13:37:52 +0000
Subject: * Patch by Paul Ruhland, 17 May 2004:   - Add support for the Logic
 Zoom LH7A40x based SDK board(s),     specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2
---
 include/configs/lpd7a400-10.h | 80 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 include/configs/lpd7a400-10.h

(limited to 'include/configs/lpd7a400-10.h')

diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
new file mode 100644
index 0000000..ecf2b5f
--- /dev/null
+++ b/include/configs/lpd7a400-10.h
@@ -0,0 +1,80 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Logic LH7A400-10 card engine
+ */
+
+#ifndef __LPD7A400_10_H
+#define __LPD7A400_10_H
+
+
+#define CONFIG_ARM920T		1	/* arm920t core */
+#define CONFIG_LH7A40X		1	/* Sharp LH7A400 SoC */
+#define CONFIG_LH7A400		1
+
+/* The system clock PLL input frequency */
+#define CONFIG_SYS_CLK_FREQ		14745600   /* System Clock PLL Input (Hz) */
+
+/* ticks per second */
+#define CFG_HZ	(508469)
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
+
+#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+
+/*----------------------------------------------------------------------
+ * Using SMC91C111 LAN chip
+ *
+ * Default IO base of chip is 0x300, Card Engine has this address lines
+ * (LAN chip) tied to Vcc, so we just care about the chip select
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE	(0x70000000)
+#undef CONFIG_SMC_USE_32_BIT
+#define CONFIG_SMC_USE_IOFUNCS
+
+#endif  /* __LPD7A400_10_H */
-- 
cgit v1.1