From fd428c05c863aefb575b12b2a1916b02d5bfa759 Mon Sep 17 00:00:00 2001
From: Detlev Zundel <dzu@denx.de>
Date: Fri, 12 Mar 2010 10:01:12 +0100
Subject: mpc5xxx: Remove all references to MGT5100

We do not support a processor that never reached a real customer.

Signed-off-by: Detlev Zundel <dzu@denx.de>
---
 include/configs/BC3450.h                   |  9 ++-------
 include/configs/IceCube.h                  | 13 +------------
 include/configs/PM520.h                    | 11 -----------
 include/configs/TB5200.h                   |  5 -----
 include/configs/TQM5200.h                  |  5 -----
 include/configs/Total5200.h                | 23 ++---------------------
 include/configs/aev.h                      |  5 -----
 include/configs/cpci5200.h                 | 11 -----------
 include/configs/hmi1001.h                  |  5 -----
 include/configs/inka4x0.h                  |  5 -----
 include/configs/ipek01.h                   |  5 -----
 include/configs/manroland/mpc5200-common.h |  5 -----
 include/configs/mecp5200.h                 | 14 --------------
 include/configs/o2dnt.h                    |  7 -------
 include/configs/pf5200.h                   | 11 -----------
 include/configs/smmaco4.h                  |  5 -----
 include/configs/spieval.h                  |  5 -----
 include/configs/v38b.h                     |  2 --
 18 files changed, 5 insertions(+), 141 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 8c5a742..44befe9 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -471,13 +471,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
-# define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-# define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-# define CONFIG_SYS_HID0_INIT		0
-# define CONFIG_SYS_HID0_FINAL		0
-#endif
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5ef0b77..5d3a744 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -30,6 +30,7 @@
  */
 
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
 #define CONFIG_ICECUBE		1	/* ... on IceCube board */
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -47,7 +48,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -77,10 +77,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else
-#define CONFIG_MII		1
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -169,7 +165,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -178,7 +173,6 @@
 #else
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
-#endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
@@ -338,13 +332,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #if defined(CONFIG_LITE5200B)
 #define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index f9687d2..22de207 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -50,7 +50,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -75,7 +74,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #undef  CONFIG_NS8382X
 
-#endif
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -111,9 +109,7 @@
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
 
-#if defined(CONFIG_MPC5200)
 #define CONFIG_CMD_PCI
-#endif
 
 
 /*
@@ -147,12 +143,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -301,13 +295,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #if defined(CONFIG_BOOT_ROM)
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_BOOTROM_BASE
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3438aba..6da18eb 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -430,13 +430,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2154c78..107bff1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -633,13 +633,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 1daa574..7510ab1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -41,6 +41,7 @@
  */
 
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
 #define CONFIG_TOTAL5200	1	/* ... on Total5200 board */
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -73,7 +74,6 @@
 #define CONFIG_SPLASH_SCREEN
 
 
-#ifdef CONFIG_MPC5200	/* MGT5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -98,12 +98,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else	/* MGT5100 */
-
-#define CONFIG_MII		1
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -127,9 +121,7 @@
  */
 #include <config_cmd_default.h>
 
-#if defined(CONFIG_MPC5200)
-    #define CONFIG_CMD_PCI
-#endif
+#define CONFIG_CMD_PCI
 
 #define CONFIG_CMD_BMP
 #define CONFIG_CMD_EEPROM
@@ -176,12 +168,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 
 /*
  * I2C configuration
@@ -326,17 +316,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
-
-#if defined (CONFIG_MGT5100)
-#   define CONFIG_BOARD_EARLY_INIT_R	/* switch from CS_BOOT to CS0 */
-#endif
 
 #if CONFIG_TOTAL5200_REV==1
 #   define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 2b4826d..98958a6 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -362,13 +362,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 52df16a..f7290d6 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -59,7 +59,6 @@
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -90,8 +89,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -169,8 +166,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
-
 #define CONFIG_RTC_M48T35A	1	/* ST Electronics M48 timekeeper */
 #define CONFIG_SYS_NVRAM_BASE_ADDR	0xfd010000
 #define CONFIG_SYS_NVRAM_SIZE		32*1024
@@ -179,7 +174,6 @@
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -303,13 +297,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index a81527e..f9cdcbc 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -261,13 +261,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 14f7826..c5b1565 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output)
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d0cb1e1..6903b36 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -324,13 +324,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index b29ef9b..d25e093 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -170,13 +170,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 4a93b58..73405ea 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -63,9 +63,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
-
 #define CONFIG_MII
 #if 0 /* test-only !!! */
 #define CONFIG_NET_MULTI	1
@@ -74,10 +71,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#else	/* MPC5100 */
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -152,12 +145,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBSPEED_133			/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -288,13 +279,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 18e7cc2..bdc0f79 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -138,7 +138,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -154,7 +153,6 @@
  */
 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
-#endif
 
 /*
  * I2C configuration
@@ -276,13 +274,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 8ca55d7..80a0bc6 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -61,7 +61,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -87,7 +86,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
-#endif
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -121,9 +119,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 
-#ifdef CONFIG_MPC5200
 #define CONFIG_CMD_PCI
-#endif
 
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
@@ -166,12 +162,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -289,13 +283,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 5a2ef3a..060026b 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -358,13 +358,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 27dda25..d377e19 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -438,13 +438,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 92bcdb3..d462ed0 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -170,12 +170,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
-#endif
 
 /*
  * I2C configuration
-- 
cgit v1.1


From 9d79e5758c3a6776be9a86856823d28e7154a481 Mon Sep 17 00:00:00 2001
From: Wolfgang Wegner <w.wegner@astro-kom.de>
Date: Mon, 25 Jan 2010 11:27:44 +0100
Subject: add ASTRO MCF5373L board

This patch adds support for ASTRO board(s) based on MCF5373L.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
---
 include/configs/astro_mcf5373l.h | 389 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 389 insertions(+)
 create mode 100644 include/configs/astro_mcf5373l.h

(limited to 'include/configs')

diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
new file mode 100644
index 0000000..1fe42f6
--- /dev/null
+++ b/include/configs/astro_mcf5373l.h
@@ -0,0 +1,389 @@
+/*
+ * Configuration settings for the Sentec Cobra Board.
+ *
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * configuration for ASTRO "Urmel" board.
+ * Originating from Cobra5272 configuration, messed up by
+ * Wolfgang Wegner <w.wegner@astro-kom.de>
+ * Please do not bother the original author with bug reports
+ * concerning this file.
+ */
+
+#ifndef _CONFIG_ASTRO_MCF5373L_H
+#define _CONFIG_ASTRO_MCF5373L_H
+
+/*
+ * set the card type to actually compile for; either of
+ * the possibilities listed below has to be used!
+ */
+#define CONFIG_ASTRO_V532	1
+
+#if CONFIG_ASTRO_V532
+#define ASTRO_ID	0xF8
+#elif CONFIG_ASTRO_V512
+#define ASTRO_ID	0xFA
+#elif CONFIG_ASTRO_TWIN7S2
+#define ASTRO_ID	0xF9
+#elif CONFIG_ASTRO_V912
+#define ASTRO_ID	0xFC
+#elif CONFIG_ASTRO_COFDMDUOS2
+#define ASTRO_ID	0xFB
+#else
+#error No card type defined!
+#endif
+
+/*
+ * Define processor
+ * possible values for Urmel board: only Coldfire M5373 processor supported
+ * (please do not change)
+ */
+
+/* it seems not clear yet which processor defines we should use */
+#define CONFIG_MCF537x			/* define processor family */
+#define CONFIG_MCF532x			/* define processor family */
+#define CONFIG_M5373			/* define processor type */
+#define CONFIG_ASTRO5373L		/* define board type */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+/*
+ * CONFIG_MK_RAM defines if u-boot is loaded via BDM (or started from
+ * a different bootloader that has already performed RAM setup) or
+ * started directly from flash, which is the regular case for production
+ * boards.
+ */
+#ifdef CONFIG_MK_RAM
+#define CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_TEXT_BASE		0x40020000
+#define ENABLE_JFFS	0
+#else
+#define CONFIG_TEXT_BASE		0x00000000
+#define ENABLE_JFFS	1
+#endif
+
+/* Define which commmands should be available at u-boot command prompt */
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_XIMG
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#if ENABLE_JFFS
+#define CONFIG_CMD_JFFS2
+#endif
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C			/* I2C with hw support */
+#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+/*
+ * Defines processor clock - important for correct timings concerning serial
+ * interface etc.
+ * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
+ */
+
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			80000000
+#define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 3)
+#define CONFIG_SYS_SDRAM_SIZE		32		/* SDRAM size in MB */
+
+#define CONFIG_SYS_CORE_SRAM_SIZE	0x8000
+#define CONFIG_SYS_CORE_SRAM		0x80000000
+
+#define CONFIG_SYS_UNIFY_CACHE
+
+/*
+ * Define baudrate for UART1 (console output, tftp, ...)
+ * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
+ * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected
+ * in u-boot command interface
+ */
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(2)
+#define CONFIG_SYS_UART2_ALT3_GPIO
+
+/*
+ * Watchdog configuration; Watchdog is disabled for running from RAM
+ * and set to highest possible value else. Beware there is no check
+ * in the watchdog code to validate the timeout value set here!
+ */
+
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 3355	/* timeout in milliseconds */
+#endif
+
+/*
+ * Configuration for environment
+ * Environment is located in the last sector of the flash
+ */
+
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_ENV_OFFSET		0x1FF8000
+#define CONFIG_ENV_SECT_SIZE		0x8000
+#define CONFIG_ENV_IS_IN_FLASH		1
+#else
+/*
+ * environment in RAM - This is used to use a single PC-based application
+ * to load an image, load U-Boot, load an environment and then start U-Boot
+ * to execute the commands from the environment. Feedback is done via setting
+ * and reading memory locations.
+ */
+#define CONFIG_ENV_ADDR		0x40060000
+#define CONFIG_ENV_SECT_SIZE	0x8000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#endif
+
+/* here we put our FPGA configuration... */
+#define CONFIG_MISC_INIT_R	1
+
+/* Define user parameters that have to be customized most likely */
+
+/* AUTOBOOT settings - booting images automatically by u-boot after power on */
+
+/*
+ * used for autoboot, delay in seconds u-boot will wait before starting
+ * defined (auto-)boot command, setting to -1 disables delay, setting to
+ * 0 will too prevent access to u-boot command interface: u-boot then has
+ * to be reflashed
+ * beware - watchdog is not serviced during autoboot delay time!
+ */
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_BOOTDELAY	1
+#else
+#define CONFIG_BOOTDELAY	1
+#endif
+
+/*
+ * The following settings will be contained in the environment block ; if you
+ * want to use a neutral environment all those settings can be manually set in
+ * u-boot: 'set' command
+ */
+
+#define _QUOTEME(x)	#x
+#define QUOTEME(x)	_QUOTEME(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS			\
+	"loaderversion=11\0"				\
+	"card_id="QUOTEME(ASTRO_ID)"\0"			\
+	"alterafile=0\0"				\
+	"xilinxfile=0\0"				\
+	"xilinxload=imxtract 0x540000 $xilinxfile 0x41000000&&"\
+		"fpga load 0 0x41000000 $filesize\0" \
+	"alteraload=imxtract 0x6c0000 $alterafile 0x41000000&&"\
+		"fpga load 1 0x41000000 $filesize\0" \
+	"env_default=1\0"				\
+	"env_check=if test $env_default -eq 1;"\
+		" then setenv env_default 0;saveenv;fi\0"
+
+/*
+ * "update" is a non-standard command that has to be supplied
+ * by external update.c; This is not included in mainline because
+ * it needs non-blocking CFI routines.
+ */
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_BOOTCOMMAND	""	/* no autoboot in this case */
+#else
+#if CONFIG_ASTRO_V532
+#define CONFIG_BOOTCOMMAND	"protect off 0x80000 0x1ffffff;run env_check;"\
+				"run xilinxload&&run alteraload&&bootm 0x80000;"\
+				"update;reset"
+#else
+#define CONFIG_BOOTCOMMAND	"protect off 0x80000 0x1ffffff;run env_check;"\
+				"run xilinxload&&bootm 0x80000;update;reset"
+#endif
+#endif
+
+/* default bootargs that are considered during boot */
+#define CONFIG_BOOTARGS		" console=ttyS2,115200 rootfstype=romfs"\
+				" loaderversion=$loaderversion"
+
+#define CONFIG_SYS_PROMPT	"URMEL > "
+
+/* default RAM address for user programs */
+#define CONFIG_SYS_LOAD_ADDR	0x20000
+
+#define CONFIG_SYS_LONGHELP
+
+#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024
+#else
+#define CONFIG_SYS_CBSIZE		256
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_FPGA_COUNT	1
+#define CONFIG_FPGA
+#define	CONFIG_FPGA_XILINX
+#define	CONFIG_FPGA_SPARTAN3
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_WAIT		1000
+
+/* End of user parameters to be customized */
+
+/* Defines memory range for test */
+
+#define CONFIG_SYS_MEMTEST_START	0x40020000
+#define CONFIG_SYS_MEMTEST_END		0x41ffffff
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/* Base register address */
+
+#define CONFIG_SYS_MBAR		0xFC000000	/* Register Base Addrs */
+
+/* System Conf. Reg. & System Protection Reg. */
+
+#define CONFIG_SYS_SCR		0x0003;
+#define CONFIG_SYS_SPR		0xffff;
+
+/*
+ * Definitions for initial stack pointer and data area (in internal SRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END		0x8000
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * for MCF5373, the allowable range is 0x40000000 to 0x7FF00000
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+
+/*
+ * Chipselect bank definitions
+ *
+ * CS0 - Flash 32MB (first 16MB)
+ * CS1 - Flash 32MB (second half)
+ * CS2 - FPGA
+ * CS3 - FPGA
+ * CS4 - unused
+ * CS5 - unused
+ */
+#define CONFIG_SYS_CS0_BASE		0
+#define CONFIG_SYS_CS0_MASK		0x00ff0001
+#define CONFIG_SYS_CS0_CTRL		0x00001fc0
+
+#define CONFIG_SYS_CS1_BASE		0x01000000
+#define CONFIG_SYS_CS1_MASK		0x00ff0001
+#define CONFIG_SYS_CS1_CTRL		0x00001fc0
+
+#define CONFIG_SYS_CS2_BASE		0x20000000
+#define CONFIG_SYS_CS2_MASK		0x00ff0001
+#define CONFIG_SYS_CS2_CTRL		0x0000fec0
+
+#define CONFIG_SYS_CS3_BASE		0x21000000
+#define CONFIG_SYS_CS3_MASK		0x00ff0001
+#define CONFIG_SYS_CS3_CTRL		0x0000fec0
+
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+
+#ifdef	CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_TEXT_BASE
+#else
+/* This is mainly used during relocation in start.S */
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
+/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + \
+						(CONFIG_SYS_SDRAM_SIZE << 20))
+
+/* FLASH organization */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	259
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_SIZE		0x2000000
+#define CONFIG_SYS_FLASH_PROTECTION	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_FLASH_CFI_NONBLOCK	1
+
+#if ENABLE_JFFS
+/* JFFS Partition offset set */
+#define CONFIG_SYS_JFFS2_FIRST_BANK    0
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1
+/* 512k reserved for u-boot */
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0x40
+#endif
+
+/* Cache Configuration */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+
+#endif	/* _CONFIG_ASTRO_MCF5373L_H */
-- 
cgit v1.1


From ac265f7fcab1a09b9a837a34ef8b10acc101695e Mon Sep 17 00:00:00 2001
From: TsiChung Liew <tsicliew@gmail.com>
Date: Wed, 10 Mar 2010 11:56:36 -0600
Subject: ColdFire: Update M5253DEMO configuration file

Fix incorrect default environment for flash erase or protect
range. Change offset from 0 to 0xff80nnnn. Remove default
ethernet setup and MAC address.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
---
 include/configs/M5253DEMO.h | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 5e86e4c..f813f88 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -95,11 +95,6 @@
 #	define DM9000_DATA		(CONFIG_DM9000_BASE + 4)
 #	undef CONFIG_DM9000_DEBUG
 
-#	define CONFIG_ETHADDR		00:e0:0c:bc:e5:60
-#	define CONFIG_IPADDR		10.82.121.249
-#	define CONFIG_NETMASK		255.255.252.0
-#	define CONFIG_SERVERIP		10.82.120.80
-#	define CONFIG_GATEWAYIP		10.82.123.254
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 
 #	define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -109,8 +104,8 @@
 		"u-boot=u-boot.bin\0"			\
 		"load=tftp ${loadaddr) ${u-boot}\0"	\
 		"upd=run load; run prog\0"		\
-		"prog=prot off 0 2ffff;"	\
-		"era 0 2ffff;"			\
+		"prog=prot off 0xff800000 0xff82ffff;"	\
+		"era 0xff800000 0xff82ffff;"		\
 		"cp.b ${loadaddr} 0 ${filesize};"	\
 		"save\0"				\
 		""
-- 
cgit v1.1


From 0e8a75550695aba9d8cfe9c7f7713da42c1f3e89 Mon Sep 17 00:00:00 2001
From: TsiChung Liew <tsicliew@gmail.com>
Date: Wed, 10 Mar 2010 16:33:03 -0600
Subject: ColdFire: Update Extra environment Data for M5275EVB

Provide extra environment Data. Remove default network
address and MAC address.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
---
 include/configs/M5275EVB.h | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index b380159..f8d43f0 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -121,11 +121,6 @@
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
-#ifdef CONFIG_MCFFEC
-#define CONFIG_ETHADDR		00:06:3b:01:41:55
-#define CONFIG_ETH1ADDR		00:0e:0c:bc:e5:60
-#endif
-
 #define CONFIG_SYS_PROMPT		"-> "
 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 
@@ -145,6 +140,23 @@
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
 
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_RETRY_COUNT	5
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* FEC_ENET */
+
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=10000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${uboot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off ffe00000 ffe3ffff;"	\
+	"era ffe00000 ffe3ffff;"		\
+	"cp.b ${loadaddr} ffe00000 ${filesize};"\
+	"save\0"				\
+	""
+
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			150000000
 
-- 
cgit v1.1


From 9e8e927023582231b034e199568e49f84ac032a9 Mon Sep 17 00:00:00 2001
From: TsiChung Liew <tsicliew@gmail.com>
Date: Wed, 10 Mar 2010 18:24:07 -0600
Subject: ColdFire: Misc update for M53017

Reside Ethernet buffer descriptors in SRAM instead of DRAM. Add
CONFIG_SYS_TX_ETH_BUFFER in platform configuration file. Update
DRAM control and SRAM control register setting. Update cache
setting where size does not write to proper region.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
---
 include/configs/M53017EVB.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 30855bd..c351d41 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -69,6 +69,8 @@
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
 #	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_TX_ETH_BUFFER	8
+#	define CONFIG_SYS_FEC_BUF_USE_SRAM
 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #	define CONFIG_HAS_ETH1
 
@@ -166,7 +168,7 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
 #define CONFIG_SYS_INIT_RAM_END		0x20000	/* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
@@ -180,7 +182,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
 #define CONFIG_SYS_SDRAM_CFG1		0x43711630
 #define CONFIG_SYS_SDRAM_CFG2		0x56670000
-#define CONFIG_SYS_SDRAM_CTRL		0xE1002000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
 #define CONFIG_SYS_SDRAM_EMOD		0x80010000
 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
 
-- 
cgit v1.1


From f628e2f72daee810aa568619b6629da68ad042d6 Mon Sep 17 00:00:00 2001
From: TsiChung Liew <tsicliew@gmail.com>
Date: Wed, 10 Mar 2010 18:50:22 -0600
Subject: ColdFire: Fix SDRAM size on M5208evb rev E

The proper SDRAM size is 32MB not 64MB

Signed-off-by: Jingchang Lu <b22599@freescale.com>
---
 include/configs/M5208EVBE.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 32123d2..3cc259f 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -158,7 +158,7 @@
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
 #define CONFIG_SYS_SDRAM_CFG1		0x43711630
 #define CONFIG_SYS_SDRAM_CFG2		0x56670000
 #define CONFIG_SYS_SDRAM_CTRL		0xE1002000
-- 
cgit v1.1


From dd9f054ede433de73b137987fb3dc066e8d24ebb Mon Sep 17 00:00:00 2001
From: TsiChung Liew <tsicliew@gmail.com>
Date: Thu, 11 Mar 2010 22:12:53 -0600
Subject: ColdFire: Cache update for all platforms

The CF will call cache functions in lib_m68/cache.c and the
cache settings are defined in platform configuration file.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
---
 include/configs/EB+MCF-EV123.h   | 12 ++++++++++++
 include/configs/M5208EVBE.h      | 13 +++++++++++++
 include/configs/M52277EVB.h      | 13 +++++++++++++
 include/configs/M5235EVB.h       | 12 ++++++++++++
 include/configs/M5249EVB.h       | 15 +++++++++++++++
 include/configs/M5253DEMO.h      | 15 +++++++++++++++
 include/configs/M5253EVBE.h      | 15 +++++++++++++++
 include/configs/M5271EVB.h       | 14 ++++++++++++++
 include/configs/M5272C3.h        | 14 ++++++++++++++
 include/configs/M5275EVB.h       | 14 ++++++++++++++
 include/configs/M5282EVB.h       | 13 +++++++++++++
 include/configs/M53017EVB.h      | 11 +++++++++++
 include/configs/M5329EVB.h       | 11 +++++++++++
 include/configs/M5373EVB.h       | 11 +++++++++++
 include/configs/M54451EVB.h      | 15 +++++++++++++++
 include/configs/M54455EVB.h      | 17 ++++++++++++++++-
 include/configs/M5475EVB.h       | 16 ++++++++++++++++
 include/configs/M5485EVB.h       | 16 ++++++++++++++++
 include/configs/TASREG.h         | 11 +++++++++++
 include/configs/astro_mcf5373l.h | 11 +++++++++++
 include/configs/cobra5272.h      | 13 +++++++++++++
 include/configs/idmr.h           | 13 +++++++++++++
 22 files changed, 294 insertions(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index a0b27a8..880cb4e 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -208,6 +208,18 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV + CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_DISD | \
+					 CF_CACR_CEIB | CF_CACR_DBWE | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 3cc259f..e6632ac 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -207,6 +207,19 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /* Chipselect bank definitions */
 /*
  * CS0 - NOR Flash
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 1801d9d..6c6b5d6 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -302,6 +302,19 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 2b816ce..5c0dc84 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -237,6 +237,18 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_DISD | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
  */
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index e3830e5..33ac285 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -60,6 +60,7 @@
  * Command line configuration.
  */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
 #undef CONFIG_CMD_NET
 
 #define CONFIG_SYS_PROMPT		"=> "
@@ -165,6 +166,20 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_FLASH_BASE | \
+					 CF_ADDRMASK(2) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ACR1		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CEIB | \
+					 CF_CACR_DBWE)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index f813f88..9944e12 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -57,6 +57,7 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_LOADB
 #define CONFIG_CMD_LOADS
 #define CONFIG_CMD_EXT2
@@ -226,6 +227,20 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_FLASH_BASE | \
+					 CF_ADDRMASK(8) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ACR1		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CEIB | \
+					 CF_CACR_DBWE)
+
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index df6970c..206d115 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -64,6 +64,7 @@
  * Command line configuration.
  */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
 #undef CONFIG_CMD_NET
 #define CONFIG_CMD_LOADB
 #define CONFIG_CMD_LOADS
@@ -179,6 +180,20 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_FLASH_BASE | \
+					 CF_ADDRMASK(2) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ACR1		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CEIB | \
+					 CF_CACR_DBWE)
+
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 50b3ab2..798949c 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -72,6 +72,7 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
@@ -229,6 +230,19 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /* Chip Select 0  : Boot Flash */
 #define CONFIG_SYS_CS0_BASE	0xFFE00000
 #define CONFIG_SYS_CS0_MASK	0x001F0001
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index f824158..f704bb3 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -74,6 +74,7 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
@@ -211,6 +212,19 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index f8d43f0..981670a 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -72,6 +72,7 @@
 /* Available command configuration */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
@@ -220,6 +221,19 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 15590cf..6e0aa14 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -64,6 +64,7 @@
  * Command line configuration.
  */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
@@ -209,6 +210,18 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV + CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_DISD | \
+					 CF_CACR_CEIB | CF_CACR_DBWE | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index c351d41..d983a8f 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -233,6 +233,17 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
+					 CF_CACR_DCM_P)
+
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
  */
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 8180c05..159b178 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -237,6 +237,17 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
+					 CF_CACR_DCM_P)
+
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
  */
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 8652a80..af1988c 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -237,6 +237,17 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
+					 CF_CACR_DCM_P)
+
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
  */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index a5acfd2..a80d330 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -309,6 +309,21 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE		16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
+					 CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 7737284..5b4bba8 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -279,7 +279,7 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_END		0x8000	/* End of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_CTRL	0x221
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
@@ -408,6 +408,21 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE		16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
+					 CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index 4534002..d007766 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -286,6 +286,22 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA + \
+					 CF_CACR_IDCM)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_BCINVA | \
+					 CF_CACR_IEC | CF_CACR_ICINVA)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
  */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 971cb67..f23b8b0 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -272,6 +272,22 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA + \
+					 CF_CACR_IDCM)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_BCINVA | \
+					 CF_CACR_IEC | CF_CACR_ICINVA)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
  */
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 25f3a26..b69f015 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -252,6 +252,17 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR1		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CEIB | \
+					 CF_CACR_DBWE)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 1fe42f6..7c8281c 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -386,4 +386,15 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
+					 CF_CACR_DCM_P)
+
 #endif	/* _CONFIG_ASTRO_MCF5373L_H */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 1c3ea23..330e3ac 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -331,6 +331,19 @@ from which user programs will be started */
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  *
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 841affb..61e3bad 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -224,6 +224,19 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
-- 
cgit v1.1


From f26a247308568e32857a5cc054f7219510a7d44e Mon Sep 17 00:00:00 2001
From: TsiChung Liew <tsicliew@gmail.com>
Date: Mon, 15 Mar 2010 19:39:21 -0500
Subject: ColdFire: Fix incorrect M5253DEMO default environment

The flash location is at 0xff800000, not 0

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
---
 include/configs/M5253DEMO.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 9944e12..b5af493 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -107,7 +107,7 @@
 		"upd=run load; run prog\0"		\
 		"prog=prot off 0xff800000 0xff82ffff;"	\
 		"era 0xff800000 0xff82ffff;"		\
-		"cp.b ${loadaddr} 0 ${filesize};"	\
+		"cp.b ${loadaddr} 0xff800000 ${filesize};"	\
 		"save\0"				\
 		""
 #endif
-- 
cgit v1.1