From 485c00a57fab86f72a3769480c66bf1ca22e1459 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 24 Oct 2008 08:56:09 +0200 Subject: ppc4xx: Disable DDR2 autocalibration on Kilauea for now Since the new autocalibration still has some problems on some Kilauea boards with 200MHz DDR2 frequency we disable the autocalibration and use the hardcoded values as done before. This seems to work reliably on all known DDR2 frequencies. After the autocalibration issue is fixed we will enable it again. Signed-off-by: Stefan Roese --- include/configs/kilauea.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 237a9c5..b943f31 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -235,9 +235,16 @@ * * DDR Autocalibration Method_B is the default. */ +#if 0 +/* + * Needs FIX!!! + * Disable autocalibration for now, because of the unresolved problem + * with kilauea board using 200MHz PLB/DDR2 frequency + */ #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A +#endif #define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) -- cgit v1.1 From 1f4d53260ec6f8f122aed75cce7c757d97a551e0 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Tue, 21 Oct 2008 18:29:46 +0200 Subject: ppc4xx: Generic architecture for xilinx ppc405(v3) As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx ppc440 boards, this patch presents a common architecture for all the xilinx ppc405 boards. Any custom xilinx ppc405 board can be added very easily with no code duplicity. This patch also adds a simple generic board, that can be used on almost any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h This patch is prepared to work with the latest version of EDK (10.1) Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stefan Roese --- include/configs/xilinx-ppc405-generic.h | 58 +++++++++++++++ include/configs/xilinx-ppc405.h | 126 ++++++++++++++++++++++++++++++++ 2 files changed, 184 insertions(+) create mode 100644 include/configs/xilinx-ppc405-generic.h create mode 100644 include/configs/xilinx-ppc405.h (limited to 'include') diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h new file mode 100644 index 0000000..5036c62 --- /dev/null +++ b/include/configs/xilinx-ppc405-generic.h @@ -0,0 +1,58 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_GEN_H +#define __CONFIG_GEN_H + +#include "../board/xilinx/ppc405-generic/xparameters.h" + +/* sdram */ +#define CONFIG_SYS_SDRAM_SIZE_MB 256 + +/* environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_SYS_ENV_OFFSET 0x3F0000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) +#define CONFIG_ENV_OVERWRITE 1 + +/*Misc*/ +#define CONFIG_SYS_PROMPT "xlx-ppc405:/# " /* Monitor Command Prompt */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Flash*/ +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define MTDIDS_DEFAULT "nor0=ppc405-flash" +#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" + +#include +#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h new file mode 100644 index 0000000..7458470 --- /dev/null +++ b/include/configs/xilinx-ppc405.h @@ -0,0 +1,126 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* cpu parameter */ +#define CONFIG_4xx 1 +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + +/* memory map */ +#define CONFIG_SYS_SDRAM_BASE 0x0 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/* u-boot commands configuration */ +#include + +/*Misc*/ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_LOOPW /* enable loopw command */ +#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE /* include version env variable */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + /* Initial Memory map for Linux */ +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SHIFT 2 + +/* stack */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_FLASH_CF 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_PROTECTION + +/* serial communication */ +#ifdef XPAR_UARTLITE_0_BASEADDR +#define CONFIG_XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR +#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif + +/* cmd config */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_IMLS + +#endif -- cgit v1.1 From 5deb8022c3749faac30e9ad9694691e2442b5c93 Mon Sep 17 00:00:00 2001 From: Georg Schardt Date: Fri, 24 Oct 2008 13:51:52 +0200 Subject: ppc4xx: New board avnet fx12 minimodul This patch adds support for the avnet fx12 minimodul. It needs the "ppc4xx: Generic architecture for xilinx ppc405" patch from Ricardo. Signed-off-by: Georg Schardt Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stefan Roese --- include/configs/fx12mm.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 include/configs/fx12mm.h (limited to 'include') diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h new file mode 100644 index 0000000..d45e7a0 --- /dev/null +++ b/include/configs/fx12mm.h @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2008 + * + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com + * + * Georg Schardt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, + see http://www.em.avnet.com +*/ + +#ifndef __CONFIG_FX12_H +#define __CONFIG_FX12_H + +#include "../board/avnet/fx12mm/xparameters.h" + +/* cmd config */ +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_NET + +/* sdram */ +#define CONFIG_SYS_SDRAM_SIZE_MB 64 + +/* environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_SYS_ENV_OFFSET 0xA0000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) +#define CONFIG_ENV_OVERWRITE 1 + +/*Misc*/ +#define CONFIG_SYS_PROMPT "FX12MM:/# " /* Monitor Command Prompt */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Flash*/ +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_2MX16_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (4*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define MTDIDS_DEFAULT "nor0=fx12mm-flash" +#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" + + +#include "configs/xilinx-ppc405.h" + +#endif /* __CONFIG_H */ + -- cgit v1.1