1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
|
// all pins on GTA04 expansion connector
// GPIO -> GTA04-Pin -> Expander function
#define MUX_BEAGLE_EXPANDER() \
// FIXME: clean up so that we have the right PinMuxes
#if 0
MUX_VAL(CP(ETK_D0), (IEN | PTD | EN | M1)) /*GPIO_17 -> MCSPI3-CLK -> TRF*/\
MUX_VAL(CP(MMC2_CLK), (IDIS | PTD | EN | M4)) /*GPIO_130 -> MCSPI3-CLK -> TRF*/\
MUX_VAL(CP(MMC2_CMD), (IDIS | PTD | EN | M4)) /*GPIO_131 -> MCSPI3-SIMO -> TRF*/\
MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132 -> MCSPI3-SOMI -> TRF*/\
MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | EN | M4)) /*GPIO_158 - Display STBY */\
MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | EN | M4)) /*GPIO_159 - McBSP1-DR -> TRF EN2 */\
MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | EN | M4)) /*GPIO_161 - McBSP1-FSX -> TRF EN */\
MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133 -> UART3-RX (software)*/\
MUX_VAL(CP(MMC2_DAT2), (IDIS | PTU | EN | M4)) /*GPIO_134 -> UART3-TX (software)*/\
MUX_VAL(CP(MMC2_DAT3), (IDIS | PTU | EN | M1)) /*GPIO_135 -> MCSPI3-CS0*/\
MUX_VAL(CP(MMC2_DAT4), (IEN | PTD | EN | M4)) /*GPIO_136 - AUX */\
MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137 - POWER */\
MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 - UART3-RTS (software) */\
MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139 - UART3-CTS (software) */\
MUX_VAL(CP(UART2_RX), (IEN | PTU | EN | M4)) /*GPIO_143 - UART2-RX */\
MUX_VAL(CP(UART2_CTS), (IDIS | PTU | EN | M4)) /*GPIO_144 - UART2-CTS */\
MUX_VAL(CP(UART2_RTS), (IDIS | PTU | EN | M4)) /*GPIO_145 - UART2-RTS */\
MUX_VAL(CP(UART2_TX), (IEN | PTU | EN | M4)) /*GPIO_146 - UART2-TX */\
MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | EN | M4)) /*GPIO_156 - KEYIRQ -> TRF IRQ */\
MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157 - PENIRQ */\
MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS */\
MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | EN | M4)) /*GPIO_162 - McBSP1-CLKX -> UART3 Powerdown */
#endif
|
