aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--uart-loader/board/omap3430labrador/omap3430labrador.c2
-rw-r--r--uart-loader/common/cmd_load.c16
-rw-r--r--uart-loader/include/configs/omap3430labrador.h4
3 files changed, 19 insertions, 3 deletions
diff --git a/uart-loader/board/omap3430labrador/omap3430labrador.c b/uart-loader/board/omap3430labrador/omap3430labrador.c
index 33361f4..1a4e243 100644
--- a/uart-loader/board/omap3430labrador/omap3430labrador.c
+++ b/uart-loader/board/omap3430labrador/omap3430labrador.c
@@ -777,7 +777,7 @@ MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/\
MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\
MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\
MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\
- MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\
+MUX_VAL(CP(ETK_CTL), (IEN | PTU | DIS | M4)) /*GPIO_13*/\
MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\
MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\
MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\
diff --git a/uart-loader/common/cmd_load.c b/uart-loader/common/cmd_load.c
index 872833d..6bd07e4 100644
--- a/uart-loader/common/cmd_load.c
+++ b/uart-loader/common/cmd_load.c
@@ -168,6 +168,18 @@ void testfn(void)
int do_comand_line(void)
{ // add testing code here
printf ("Welcome to uart-loader\n");
+ printf (" c - run test code in RAM\n");
+ printf (" x [addr] - execute\n");
+ printf (" l - loop hello world\n");
+ printf (" ram - fill ram with data pattern\n");
+ printf (" a addr - set address\n");
+ printf (" r [size] - read bytes\n");
+ printf (" rl [size] - read long words\n");
+ printf (" f [value [size]] - write bytes\n");
+ printf (" bl - blink backlight\n");
+ printf (" g - show GPIOs\n");
+ printf (" m - show PinMux\n");
+ return 0;
while(1) {
char *c;
int argc=0;
@@ -190,7 +202,7 @@ int do_comand_line(void)
break; // command
default:
if(pos < sizeof(line)/sizeof(line[0])) {
- putc(line[pos]);
+ putc(line[pos]); // echo
pos++;
}
continue;
@@ -234,7 +246,7 @@ int do_comand_line(void)
else if(strcmp(argv[0], "l") == 0) { // l - loop
int d=1;
while(1)
- printf ("Welcome to uart-monitor (%d)\n", d++), udelay(500*1000);
+ printf ("Welcome to uart-loader (%d)\n", d++), udelay(500*1000);
}
else if(strcmp(argv[0], "ram") == 0) {
int val=0x55;
diff --git a/uart-loader/include/configs/omap3430labrador.h b/uart-loader/include/configs/omap3430labrador.h
index e1e2665..53b72f1 100644
--- a/uart-loader/include/configs/omap3430labrador.h
+++ b/uart-loader/include/configs/omap3430labrador.h
@@ -27,6 +27,10 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/* configure for GTA04 with DM3730 */
+#define CONFIG_OMAP36XX 1 /* or 36XX (DM3730) */
+#define PRCM_CLK_CFG2_400MHZ 1
+
/* serial printf facility takes about 3.5K */
#define CFG_PRINTF
//#undef CFG_PRINTF