aboutsummaryrefslogtreecommitdiffstats
path: root/include/configs/omap3530beagle.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/omap3530beagle.h')
-rw-r--r--include/configs/omap3530beagle.h205
1 files changed, 205 insertions, 0 deletions
diff --git a/include/configs/omap3530beagle.h b/include/configs/omap3530beagle.h
new file mode 100644
index 0000000..5625417
--- /dev/null
+++ b/include/configs/omap3530beagle.h
@@ -0,0 +1,205 @@
+/*
+ * (C) Copyright 2006
+ * Texas Instruments <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * X-Loader Configuation settings for the TI OMAP SDP3430 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* serial printf facility takes about 3.5K */
+#define CFG_PRINTF
+//#undef CFG_PRINTF
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP34XX 1 /* which is a 34XX */
+#define CONFIG_OMAP3430 1 /* which is in a 3430 */
+#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */
+
+#define CONFIG_BEAGLE_REV2 1
+
+/* Enable the below macro if MMC boot support is required */
+#define CONFIG_MMC 1
+#if defined(CONFIG_MMC)
+ #define CFG_CMD_MMC 1
+ #define CFG_CMD_FAT 1
+ #define CFG_I2C_SPEED 100000
+ #define CFG_I2C_SLAVE 1
+ #define CFG_I2C_BUS 0
+ #define CFG_I2C_BUS_SELECT 1
+ #define CONFIG_DRIVER_OMAP34XX_I2C 1
+#endif
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+/* uncomment it if you need timer based udelay(). it takes about 250 bytes */
+//#define CFG_UDELAY
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+
+#if (V_OSCK > 19200000)
+#define V_SCLK (V_OSCK >> 1)
+#else
+#define V_SCLK V_OSCK
+#endif
+
+//#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */
+#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */
+#define PRCM_PCLK_OPP2 1 /* ARM=381MHz - VDD1=1.20v */
+
+/* Memory type */
+#define CFG_3430SDRAM_DDR 1
+
+/* The actual register values are defined in u-boot- mem.h */
+/* SDRAM Bank Allocation method */
+//#define SDRC_B_R_C 1
+//#define SDRC_B1_R_B0_C 1
+#define SDRC_R_B_C 1
+
+#define NAND_BASE_ADR NAND_BASE
+#define ONENAND_BASE ONENAND_MAP
+#define ONENAND_ADDR ONENAND_BASE
+
+#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M
+
+#ifdef CFG_PRINTF
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE -4
+#define CFG_NS16550_CLK 48000000
+#define CFG_NS16550_COM3 OMAP34XX_UART3
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 3 /* use UART3 */
+#define CONFIG_CONS_INDEX 3
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_PBSIZE 256
+
+#endif /* CFG_PRINTF */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LOADADDR 0x80008000
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Board NAND Info.
+ */
+
+
+#define CFG_NAND_K9F1G08R0A
+#define NAND_16BIT
+
+/* NAND is partitioned:
+ * 0x00000000 - 0x0007FFFF Booting Image
+ * 0x00080000 - 0x000BFFFF U-Boot Image
+ * 0x000C0000 - 0x000FFFFF U-Boot Env Data (X-loader doesn't care)
+ * 0x00100000 - 0x002FFFFF Kernel Image
+ * 0x00300000 - 0x08000000 depends on application
+ */
+#define NAND_UBOOT_START 0x0080000 /* Leaving first 4 blocks for x-load */
+#define NAND_UBOOT_END 0x0160000 /* Giving a space of 2 blocks = 256KB */
+#define NAND_BLOCK_SIZE 0x20000
+
+#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50)
+#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE+0x7C)
+#define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE+0x80)
+#define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE+0x84)
+
+#ifdef NAND_16BIT
+#define WRITE_NAND_COMMAND(d, adr) \
+ do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d; } while (0)
+#define WRITE_NAND_ADDRESS(d, adr) \
+ do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d; } while (0)
+#define WRITE_NAND(d, adr) \
+ do {*(volatile u16 *)GPMC_NAND_DATA_0 = d; } while (0)
+#define READ_NAND(adr) \
+ (*(volatile u16 *)GPMC_NAND_DATA_0)
+#define NAND_WAIT_READY()
+#define NAND_WP_OFF() \
+ do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010; } while (0)
+#define NAND_WP_ON() \
+ do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010; } while (0)
+
+#else /* to support 8-bit NAND devices */
+#define WRITE_NAND_COMMAND(d, adr) \
+ do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d; } while (0)
+#define WRITE_NAND_ADDRESS(d, adr) \
+ do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d; } while (0)
+#define WRITE_NAND(d, adr) \
+ do {*(volatile u8 *)GPMC_NAND_DATA_0 = d; } while (0)
+#define READ_NAND(adr) \
+ (*(volatile u8 *)GPMC_NAND_DATA_0);
+#define NAND_WAIT_READY()
+#define NAND_WP_OFF() \
+ do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010; } while (0)
+#define NAND_WP_ON() \
+ do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010; } while (0)
+
+#endif
+
+#define NAND_CTL_CLRALE(adr)
+#define NAND_CTL_SETALE(adr)
+#define NAND_CTL_CLRCLE(adr)
+#define NAND_CTL_SETCLE(adr)
+#define NAND_DISABLE_CE()
+#define NAND_ENABLE_CE()
+
+/*-----------------------------------------------------------------------
+ * Board oneNAND Info.
+ */
+#define CFG_SYNC_BURST_READ 1
+
+/* OneNAND is partitioned:
+ * 0x0000000 - 0x0080000 X-Loader
+ * 0x0080000 - 0x00c0000 U-boot Image
+ * 0x00c0000 - 0x00e0000 U-Boot Env Data (X-loader doesn't care)
+ * 0x00e0000 - 0x0120000 Kernel Image
+ * 0x0120000 - 0x4000000 depends on application
+ */
+
+#define ONENAND_START_BLOCK 4
+#define ONENAND_END_BLOCK 6
+#define ONENAND_PAGE_SIZE 2048 /* 2KB */
+#define ONENAND_BLOCK_SIZE 0x20000 /* 128KB */
+
+#endif /* __CONFIG_H */
+