diff options
Diffstat (limited to 'uart-loader/board/omap3430labrador/platform.S')
| -rw-r--r-- | uart-loader/board/omap3430labrador/platform.S | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/uart-loader/board/omap3430labrador/platform.S b/uart-loader/board/omap3430labrador/platform.S deleted file mode 100644 index 42dfc72..0000000 --- a/uart-loader/board/omap3430labrador/platform.S +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004-2006 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/cpu.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> - -_TEXT_BASE: - .word TEXT_BASE /* sdram load addr from config.mk */ - -#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) -/************************************************************************** - * cpy_clk_code: relocates clock code into SRAM where its safer to execute - * R1 = SRAM destination address. - *************************************************************************/ -.global cpy_clk_code - cpy_clk_code: - /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ -next2: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next2 - mov pc, lr /* back to caller */ - -/* **************************************************************************** - * NOTE: 3430 X-loader currently does not use this code. -* It could be removed its is kept for compatabily with u-boot. - * - * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed - * -executed from SRAM. - * R0 = CM_CLKEN_PLL-bypass value - * R1 = CM_CLKSEL1_PLL-m, n, and divider values - * R2 = CM_CLKSEL_CORE-divider values - * R3 = CM_IDLEST_CKGEN - addr dpll lock wait - * - * Note: If core unlocks/relocks and SDRAM is running fast already it gets - * confused. A reset of the controller gets it back. Taking away its - * L3 when its not in self refresh seems bad for it. Normally, this code - * runs from flash before SDR is init so that should be ok. - ******************************************************************************/ -.global go_to_speed - go_to_speed: - stmfd sp!, {r4-r6} - - /* move into fast relock bypass */ - ldr r4, pll_ctl_add - str r0, [r4] -wait1: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - beq wait1 /* if lock, loop */ - - /* set new dpll dividers _after_ in bypass */ - ldr r5, pll_div_add1 - str r1, [r5] /* set m, n, m2 */ - ldr r5, pll_div_add2 - str r2, [r5] /* set l3/l4/.. dividers*/ - ldr r5, pll_div_add3 /* wkup */ - ldr r2, pll_div_val3 /* rsm val */ - str r2, [r5] - ldr r5, pll_div_add4 /* gfx */ - ldr r2, pll_div_val4 - str r2, [r5] - ldr r5, pll_div_add5 /* emu */ - ldr r2, pll_div_val5 - str r2, [r5] - - /* now prepare GPMC (flash) for new dpll speed */ - /* flash needs to be stable when we jump back to it */ - ldr r5, flash_cfg3_addr - ldr r2, flash_cfg3_val - str r2, [r5] - ldr r5, flash_cfg4_addr - ldr r2, flash_cfg4_val - str r2, [r5] - ldr r5, flash_cfg5_addr - ldr r2, flash_cfg5_val - str r2, [r5] - ldr r5, flash_cfg1_addr - ldr r2, [r5] - orr r2, r2, #0x3 /* up gpmc divider */ - str r2, [r5] - - /* lock DPLL3 and wait a bit */ - orr r0, r0, #0x7 /* set up for lock mode */ - str r0, [r4] /* lock */ - nop /* ARM slow at this point working at sys_clk */ - nop - nop - nop -wait2: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - bne wait2 /* if lock, loop */ - nop - nop - nop - nop - ldmfd sp!, {r4-r6} - mov pc, lr /* back to caller, locked */ - -_go_to_speed: .word go_to_speed - -/* these constants need to be close for PIC code */ -/* The Nor has to be in the Flash Base CS0 for this condition to happen */ -flash_cfg1_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) -flash_cfg3_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) -flash_cfg3_val: - .word STNOR_GPMC_CONFIG3 -flash_cfg4_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) -flash_cfg4_val: - .word STNOR_GPMC_CONFIG4 -flash_cfg5_val: - .word STNOR_GPMC_CONFIG5 -flash_cfg5_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) -pll_ctl_add: - .word CM_CLKEN_PLL -pll_div_add1: - .word CM_CLKSEL1_PLL -pll_div_add2: - .word CM_CLKSEL_CORE -pll_div_add3: - .word CM_CLKSEL_WKUP -pll_div_val3: - .word (WKUP_RSM << 1) -pll_div_add4: - .word CM_CLKSEL_GFX -pll_div_val4: - .word (GFX_DIV << 0) -pll_div_add5: - .word CM_CLKSEL1_EMU -pll_div_val5: - .word CLSEL1_EMU_VAL - -#endif - -.globl lowlevel_init -lowlevel_init: - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -REG_CONTROL_STATUS: - .word CONTROL_STATUS -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK - -.globl get_mpu_dpll_param -get_mpu_dpll_param: - adr r0, mpu_dpll_param - mov pc, lr - -.globl get_iva_dpll_param -get_iva_dpll_param: - adr r0, iva_dpll_param - mov pc, lr - -.globl get_core_dpll_param -get_core_dpll_param: - adr r0, core_dpll_param - mov pc, lr - -.globl get_per_dpll_param -get_per_dpll_param: - adr r0, per_dpll_param - mov pc, lr - -#if defined(CONFIG_OMAP36XX) -#include <asm/arch/dpll_table_36xx.S> -#elif defined(CONFIG_OMAP34XX) -#include <asm/arch/dpll_table_34xx.S> -#else -#error "DPLL Table is undefined" -#endif
\ No newline at end of file |