diff options
Diffstat (limited to 'uart-monitor/drivers/k9f5616.c')
| m--------- | uart-monitor | 0 | ||||
| -rw-r--r-- | uart-monitor/drivers/k9f5616.c | 229 |
2 files changed, 229 insertions, 0 deletions
diff --git a/uart-monitor b/uart-monitor deleted file mode 160000 -Subproject eb8b047c29a2027fbdd841cd1289fa27ddb22d7 diff --git a/uart-monitor/drivers/k9f5616.c b/uart-monitor/drivers/k9f5616.c new file mode 100644 index 0000000..4081664 --- /dev/null +++ b/uart-monitor/drivers/k9f5616.c @@ -0,0 +1,229 @@ +/* + * (C) Copyright 2004 Texas Instruments + * Jian Zhang <jzhang@ti.com> + * + * Samsung K9F5616Q0C NAND chip driver for an OMAP16xx board + * + * This file is based on the following u-boot file: + * common/cmd_nand.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CFG_NAND_K9F5616 + +#define K9F5616_MFR 0xec +#define K9F5616_ID 0x45 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define PAGE_SIZE 512 + +static int nand_read_page(u_char *buf, ulong page_addr); +static int nand_read_oob(u_char * buf, ulong page_addr); + +/* JFFS2 512-byte-page ECC layout */ +static u_char ecc_pos[] = {0,1,2,3,6,7}; +static u_char eccvalid_pos = 4; + +/* NanD_Command: Send a flash command to the flash chip */ +static int NanD_Command(unsigned char command) +{ + NAND_CTL_SETCLE(NAND_ADDR); + WRITE_NAND_COMMAND(command, NAND_ADDR); + NAND_CTL_CLRCLE(NAND_ADDR); + + if(command == NAND_CMD_RESET){ + unsigned char ret_val; + NanD_Command(NAND_CMD_STATUS); + do{ + ret_val = READ_NAND(NAND_ADDR);/* wait till ready */ + } while((ret_val & 0x40) != 0x40); + } + + NAND_WAIT_READY(); + return 0; +} + +/* NanD_Address: Set the current address for the flash chip */ +static int NanD_Address(int numbytes, unsigned long ofs) +{ + int i; + + NAND_CTL_SETALE(NAND_ADDR); + + if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) + WRITE_NAND_ADDRESS(ofs, NAND_ADDR); + + ofs = ofs >> 8; + + if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) + for (i = 0; i < 2; i++, ofs = ofs >> 8) + WRITE_NAND_ADDRESS(ofs, NAND_ADDR); + + NAND_CTL_CLRALE(NAND_ADDR); + + NAND_WAIT_READY(); + return 0; +} + +/* read chip mfr and id + * return 0 if they match board config + * return 1 if not + */ +int nand_chip() +{ + int mfr, id; + + NAND_ENABLE_CE(); + + if (NanD_Command(NAND_CMD_RESET)) { + printf("Err: RESET\n"); + NAND_DISABLE_CE(); + return 1; + } + + if (NanD_Command(NAND_CMD_READID)) { + printf("Err: READID\n"); + NAND_DISABLE_CE(); + return 1; + } + + NanD_Address(ADDR_COLUMN, 0); + + mfr = READ_NAND(NAND_ADDR); + id = READ_NAND(NAND_ADDR); + + NAND_DISABLE_CE(); + + return (mfr != K9F5616_MFR || id != K9F5616_ID); +} + +/* read a block data to buf + * return 1 if the block is bad or ECC error can't be corrected for any page + * return 0 on sucess + */ +int nand_read_block(unsigned char *buf, ulong block_addr) +{ + int i, offset = 0; + uchar oob_buf[16]; + + /* check bad block */ + /* 0th and 5th words need be 0xffff */ + if (nand_read_oob(oob_buf, block_addr) || +// oob_buf[0] != 0xff || oob_buf[1] != 0xff || +// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){ + oob_buf[5] != 0xff){ + printf("Skipped bad block at 0x%x\n", block_addr); + return 1; /* skip bad block */ + } + + /* read the block page by page*/ + for (i=0; i<32; i++){ + if (nand_read_page(buf+offset, block_addr + offset)) + return 1; + offset += PAGE_SIZE; + } + + return 0; +} + +/* read a page with ECC */ +static int nand_read_page(u_char *buf, ulong page_addr) +{ + u_char ecc_code[6]; + u_char ecc_calc[3]; + u_char oob_buf[16]; + u_char *p; + u16 val; + int cntr; + + NAND_ENABLE_CE(); + NanD_Command(NAND_CMD_READ0); + NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1); + + NAND_WAIT_READY(); + p = buf; + for (cntr = 0; cntr < 256; cntr++){ + val = READ_NAND(NAND_ADDR); + *p++ = val & 0xff; + *p++ = val >> 8; + } + + p = oob_buf; + for (cntr = 0; cntr < 8; cntr++){ + val = READ_NAND(NAND_ADDR); + *p++ = val & 0xff; + *p++ = val >> 8; + } + NAND_DISABLE_CE(); /* set pin high */ + + /* Pick the ECC bytes out of the oob data */ + for (cntr = 0; cntr < 6; cntr++) + ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; + + + if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) { + nand_calculate_ecc (buf, &ecc_calc[0]); + if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) { + printf ("ECC Failed, page 0x%08x\n", page_addr); + return 1; + } + } + + if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) { + nand_calculate_ecc (buf + 256, &ecc_calc[0]); + if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) { + printf ("ECC Failed, page 0x%08x\n", page_addr+0x100); + return 1; + } + } + + return 0; +} + +/* read from the 16 bytes of oob data that correspond to a 512 byte page. + */ +static int nand_read_oob(u_char *buf, ulong page_addr) +{ + u16 val; + int cntr; + + NAND_ENABLE_CE(); /* set pin low */ + NanD_Command(NAND_CMD_READOOB); + NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1); + NAND_WAIT_READY(); + + for (cntr = 0; cntr < 8; cntr++){ + val = READ_NAND(NAND_ADDR); + *buf++ = val & 0xff; + *buf++ = val >> 8; + } + + NAND_WAIT_READY(); + NAND_DISABLE_CE(); /* set pin high */ + + return 0; +} + +#endif |