diff options
Diffstat (limited to 'x-loader/board/omap3530beagle/omap3530beagle.c')
| m--------- | x-loader | 0 | ||||
| -rw-r--r-- | x-loader/board/omap3530beagle/omap3530beagle.c | 1012 |
2 files changed, 1012 insertions, 0 deletions
diff --git a/x-loader b/x-loader deleted file mode 160000 -Subproject 1c9276af4d6a5b7014a7630a1abeddf3b317756 diff --git a/x-loader/board/omap3530beagle/omap3530beagle.c b/x-loader/board/omap3530beagle/omap3530beagle.c new file mode 100644 index 0000000..eb8008e --- /dev/null +++ b/x-loader/board/omap3530beagle/omap3530beagle.c @@ -0,0 +1,1012 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* params for XM */ +#define CORE_DPLL_PARAM_M2 0x09 +#define CORE_DPLL_PARAM_M 0x360 +#define CORE_DPLL_PARAM_N 0xC + +/* BeagleBoard revisions */ +#define REVISION_AXBX 0x7 +#define REVISION_CX 0x6 +#define REVISION_C4 0x5 +#define REVISION_XM 0x0 + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(); +extern dpll_param *get_iva_dpll_param(); +extern dpll_param *get_core_dpll_param(); +extern dpll_param *get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return mode >>= 8; +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + + if (beagle_revision() == REVISION_XM) + return GPMC_NONE; + + u32 mem_type = get_sysboot_value(); + switch (mem_type) { + case 0: + case 2: + case 4: + case 16: + case 22: + return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: + return GPMC_NAND; + + case 3: + case 6: + return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: + return GPMC_MDOC; + + case 17: + case 18: + case 24: + return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: + return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if (get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/****************************************** + * beagle_identify + * Description: Detect if we are running on a Beagle revision Ax/Bx, + * C1/2/3, C4 or D. This can be done by reading + * the level of GPIO173, GPIO172 and GPIO171. This should + * result in + * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx + * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 + * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 + * GPIO173, GPIO172, GPIO171: 0 0 0 => XM + ******************************************/ +int beagle_revision(void) +{ + int rev; + + omap_request_gpio(171); + omap_request_gpio(172); + omap_request_gpio(173); + omap_set_gpio_direction(171, 1); + omap_set_gpio_direction(172, 1); + omap_set_gpio_direction(173, 1); + + rev = omap_get_gpio_datain(173) << 2 | + omap_get_gpio_datain(172) << 1 | + omap_get_gpio_datain(171); + omap_free_gpio(171); + omap_free_gpio(172); + omap_free_gpio(173); + + return rev; +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + if (beagle_revision() == REVISION_XM) { + __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_XM, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_1); + } else { + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } + + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + + delay(5000); + + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif /* CFG_3430SDRAM_DDR */ + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else + cdiv = 1; + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source */ + /* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start) ; /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + cdiff *= cdiv; + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if (osc_clk == S38_4M) + *sys_clkin_sel = 4; + else if (osc_clk == S26M) + *sys_clkin_sel = 3; + else if (osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if (osc_clk == S13M) + *sys_clkin_sel = 1; + else if (osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */ + clk_index = sys_clkin_sel / 2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + + if (beagle_revision() == REVISION_XM) { + sr32(CM_CLKSEL3_PLL, 0, 5, CORE_DPLL_PARAM_M2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, CORE_DPLL_PARAM_M); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, CORE_DPLL_PARAM_N); /* set n */ + } else { + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + } + + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT) */ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock(); + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + per_clocks_enable(); + prcm_init(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r(void) +{ + int rev; + + rev = beagle_revision(); + switch (rev) { + case REVISION_AXBX: + printf("Beagle Rev Ax/Bx\n"); + break; + case REVISION_CX: + printf("Beagle Rev C1/C2/C3\n"); + break; + case REVISION_C4: + printf("Beagle Rev C4\n"); + break; + case REVISION_XM: + printf("Beagle xM Rev A\n"); + break; + default: + printf("Beagle unknown 0x%02x\n", rev); + } + + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); + +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); + sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); + + sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); + sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); + sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); + sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); + sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); + sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); + sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); + sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); + sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); + sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); + sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); + sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); + + /* Enable GPIO 5 & GPIO 6 clocks */ + sr32(CM_FCLKEN_PER, 17, 2, 0x3); + sr32(CM_ICLKEN_PER, 17, 2, 0x3); + + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M1)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(McSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(McSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(McSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29 */\ + MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ + MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals, NAND is mapped at CS0, oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS is done in u-boot. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) { + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()) { +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + + } + + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) { + __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()) { +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } + return 0; +} + +#define DEBUG_LED1 149 /* gpio */ +#define DEBUG_LED2 150 /* gpio */ + +void blinkLEDs() +{ + void *p; + + /* Alternately turn the LEDs on and off */ + p = (unsigned long *)OMAP34XX_GPIO5_BASE; + while (1) { + /* turn LED1 on and LED2 off */ + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED1 % 32); + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED2 % 32); + + /* delay for a while */ + delay(1000); + + /* turn LED1 off and LED2 on */ + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED1 % 32); + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED2 % 32); + + /* delay for a while */ + delay(1000); + } +} + +/* optionally do something like blinking LED */ +void board_hang(void) +{ + while (1) + blinkLEDs(); +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} |