From 8a096e250cd4eafa42cc44ec40a4f76d336f8616 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Fri, 20 Apr 2012 14:13:13 +0200 Subject: cleaned old uart-monitor and uart-loader which have become part of x-loader --- board/omap3530gta04/config.mk | 2 +- include/configs/omap3530gta04.h | 4 +- uart-loader/.gitignore | 50 -- uart-loader/Makefile | 222 ----- uart-loader/README | 152 ---- uart-loader/arm_config.mk | 24 - uart-loader/board/omap3430labrador/Makefile | 47 -- uart-loader/board/omap3430labrador/config.mk | 22 - .../board/omap3430labrador/omap3430labrador.c | 875 ------------------- uart-loader/board/omap3430labrador/platform.S | 218 ----- uart-loader/common/Makefile | 48 -- uart-loader/common/cmd_load.c | 841 ------------------- uart-loader/config.mk | 175 ---- uart-loader/cpu/omap3/Makefile | 43 - uart-loader/cpu/omap3/config.mk | 32 - uart-loader/cpu/omap3/cpu.c | 51 -- uart-loader/cpu/omap3/mmc.c | 1 - uart-loader/cpu/omap3/mmc_host_def.h | 1 - uart-loader/cpu/omap3/mmc_protocol.h | 1 - uart-loader/cpu/omap3/start.S | 230 ----- uart-loader/cpu/omap3/sys_info.c | 82 -- uart-loader/disk/Makefile | 44 - uart-loader/disk/part.c | 273 ------ uart-loader/drivers/Makefile | 70 -- uart-loader/drivers/k9f1g08r0a.c | 512 ------------ uart-loader/drivers/k9f5616.c | 229 ----- uart-loader/drivers/k9k1216.c | 258 ------ uart-loader/drivers/ns16550.c | 69 -- uart-loader/drivers/onenand.c | 203 ----- uart-loader/drivers/onenand_regs.h | 167 ---- uart-loader/drivers/serial.c | 119 --- uart-loader/fs/Makefile | 29 - uart-loader/fs/fat/Makefile | 46 - uart-loader/fs/fat/fat.c | 927 --------------------- uart-loader/fs/fat/file.c | 208 ----- uart-loader/include/asm/arch-arm1136/bits.h | 49 -- uart-loader/include/asm/arch-arm1136/clocks.h | 1 - uart-loader/include/asm/arch-arm1136/clocks242x.h | 1 - uart-loader/include/asm/arch-arm1136/clocks243x.h | 1 - uart-loader/include/asm/arch-arm1136/mem.h | 1 - uart-loader/include/asm/arch-arm1136/omap2420.h | 223 ----- uart-loader/include/asm/arch-arm1136/omap2430.h | 255 ------ uart-loader/include/asm/arch-arm1136/sizes.h | 50 -- uart-loader/include/asm/arch-arm1136/sys_info.h | 139 --- uart-loader/include/asm/arch-arm926ejs/sizes.h | 51 -- uart-loader/include/asm/arch-omap3/bits.h | 1 - uart-loader/include/asm/arch-omap3/clocks.h | 1 - uart-loader/include/asm/arch-omap3/clocks343x.h | 1 - uart-loader/include/asm/arch-omap3/cpu.h | 1 - .../include/asm/arch-omap3/dpll_table_34xx.S | 1 - .../include/asm/arch-omap3/dpll_table_36xx.S | 1 - uart-loader/include/asm/arch-omap3/mem.h | 1 - uart-loader/include/asm/arch-omap3/mmc.h | 187 ----- uart-loader/include/asm/arch-omap3/mux.h | 1 - uart-loader/include/asm/arch-omap3/omap3430.h | 1 - uart-loader/include/asm/arch-omap3/rev.h | 1 - uart-loader/include/asm/arch-omap3/sizes.h | 1 - uart-loader/include/asm/arch-omap3/sys_info.h | 1 - uart-loader/include/asm/arch-omap3/sys_proto.h | 1 - uart-loader/include/asm/atomic.h | 113 --- uart-loader/include/asm/byteorder.h | 1 - uart-loader/include/asm/posix_types.h | 79 -- uart-loader/include/asm/setup.h | 269 ------ uart-loader/include/asm/sizes.h | 52 -- uart-loader/include/asm/string.h | 47 -- uart-loader/include/asm/types.h | 50 -- uart-loader/include/asm/x-load-arm.h | 40 - uart-loader/include/command.h | 1 - uart-loader/include/common.h | 110 --- uart-loader/include/configs/omap3430labrador.h | 224 ----- uart-loader/include/fat.h | 1 - uart-loader/include/ide.h | 1 - uart-loader/include/linux/byteorder | 1 - uart-loader/include/linux/config.h | 6 - uart-loader/include/linux/posix_types.h | 48 -- uart-loader/include/linux/stat.h | 1 - uart-loader/include/linux/stddef.h | 18 - uart-loader/include/linux/time.h | 1 - uart-loader/include/linux/types.h | 130 --- uart-loader/include/malloc.h | 1 - uart-loader/include/mmc.h | 1 - uart-loader/include/ns16550.h | 130 --- uart-loader/include/part.h | 1 - uart-loader/lib/Makefile | 46 - uart-loader/lib/_udivsi3.S | 77 -- uart-loader/lib/_umodsi3.S | 88 -- uart-loader/lib/board.c | 242 ------ uart-loader/lib/div0.c | 30 - uart-loader/lib/ecc_256.c | 329 -------- uart-loader/lib/ecc_512.c | 420 ---------- uart-loader/lib/printf.c | 304 ------- uart-loader/mkconfig | 61 -- uart-loader/scripts/mkoneboot.sh | 16 - uart-loader/scripts/signGP.c | 73 -- uart-monitor/.gitignore | 50 -- uart-monitor/Makefile | 222 ----- uart-monitor/README | 152 ---- uart-monitor/arm_config.mk | 24 - uart-monitor/board/omap3430labrador/Makefile | 47 -- uart-monitor/board/omap3430labrador/config.mk | 22 - .../board/omap3430labrador/omap3430labrador.c | 875 ------------------- uart-monitor/board/omap3430labrador/platform.S | 218 ----- uart-monitor/common/Makefile | 48 -- uart-monitor/common/cmd_load.c | 325 -------- uart-monitor/config.mk | 175 ---- uart-monitor/cpu/omap3/Makefile | 43 - uart-monitor/cpu/omap3/config.mk | 32 - uart-monitor/cpu/omap3/cpu.c | 51 -- uart-monitor/cpu/omap3/mmc.c | 1 - uart-monitor/cpu/omap3/mmc_host_def.h | 1 - uart-monitor/cpu/omap3/mmc_protocol.h | 1 - uart-monitor/cpu/omap3/start.S | 230 ----- uart-monitor/cpu/omap3/sys_info.c | 82 -- uart-monitor/disk/Makefile | 44 - uart-monitor/disk/part.c | 273 ------ uart-monitor/drivers/Makefile | 70 -- uart-monitor/drivers/k9f1g08r0a.c | 512 ------------ uart-monitor/drivers/k9f5616.c | 229 ----- uart-monitor/drivers/k9k1216.c | 258 ------ uart-monitor/drivers/ns16550.c | 69 -- uart-monitor/drivers/onenand.c | 203 ----- uart-monitor/drivers/onenand_regs.h | 167 ---- uart-monitor/drivers/serial.c | 119 --- uart-monitor/fs/Makefile | 29 - uart-monitor/fs/fat/Makefile | 46 - uart-monitor/fs/fat/fat.c | 927 --------------------- uart-monitor/fs/fat/file.c | 208 ----- uart-monitor/include/asm/arch-arm1136/bits.h | 49 -- uart-monitor/include/asm/arch-arm1136/clocks.h | 1 - uart-monitor/include/asm/arch-arm1136/clocks242x.h | 1 - uart-monitor/include/asm/arch-arm1136/clocks243x.h | 1 - uart-monitor/include/asm/arch-arm1136/mem.h | 1 - uart-monitor/include/asm/arch-arm1136/omap2420.h | 223 ----- uart-monitor/include/asm/arch-arm1136/omap2430.h | 255 ------ uart-monitor/include/asm/arch-arm1136/sizes.h | 50 -- uart-monitor/include/asm/arch-arm1136/sys_info.h | 139 --- uart-monitor/include/asm/arch-arm926ejs/sizes.h | 51 -- uart-monitor/include/asm/arch-omap3/bits.h | 1 - uart-monitor/include/asm/arch-omap3/clocks.h | 1 - uart-monitor/include/asm/arch-omap3/clocks343x.h | 1 - uart-monitor/include/asm/arch-omap3/cpu.h | 1 - .../include/asm/arch-omap3/dpll_table_34xx.S | 1 - .../include/asm/arch-omap3/dpll_table_36xx.S | 1 - uart-monitor/include/asm/arch-omap3/mem.h | 1 - uart-monitor/include/asm/arch-omap3/mmc.h | 187 ----- uart-monitor/include/asm/arch-omap3/mux.h | 1 - uart-monitor/include/asm/arch-omap3/omap3430.h | 1 - uart-monitor/include/asm/arch-omap3/rev.h | 1 - uart-monitor/include/asm/arch-omap3/sizes.h | 1 - uart-monitor/include/asm/arch-omap3/sys_info.h | 1 - uart-monitor/include/asm/arch-omap3/sys_proto.h | 1 - uart-monitor/include/asm/atomic.h | 113 --- uart-monitor/include/asm/byteorder.h | 1 - uart-monitor/include/asm/posix_types.h | 79 -- uart-monitor/include/asm/setup.h | 269 ------ uart-monitor/include/asm/sizes.h | 52 -- uart-monitor/include/asm/string.h | 47 -- uart-monitor/include/asm/types.h | 50 -- uart-monitor/include/asm/x-load-arm.h | 40 - uart-monitor/include/command.h | 1 - uart-monitor/include/common.h | 110 --- uart-monitor/include/configs/omap3430labrador.h | 224 ----- uart-monitor/include/fat.h | 1 - uart-monitor/include/ide.h | 1 - uart-monitor/include/linux/byteorder | 1 - uart-monitor/include/linux/config.h | 6 - uart-monitor/include/linux/posix_types.h | 48 -- uart-monitor/include/linux/stat.h | 1 - uart-monitor/include/linux/stddef.h | 18 - uart-monitor/include/linux/time.h | 1 - uart-monitor/include/linux/types.h | 130 --- uart-monitor/include/malloc.h | 1 - uart-monitor/include/mmc.h | 1 - uart-monitor/include/ns16550.h | 130 --- uart-monitor/include/part.h | 1 - uart-monitor/lib/Makefile | 46 - uart-monitor/lib/_udivsi3.S | 77 -- uart-monitor/lib/_umodsi3.S | 88 -- uart-monitor/lib/board.c | 189 ----- uart-monitor/lib/div0.c | 30 - uart-monitor/lib/ecc_256.c | 329 -------- uart-monitor/lib/ecc_512.c | 420 ---------- uart-monitor/lib/printf.c | 304 ------- uart-monitor/mkconfig | 61 -- uart-monitor/scripts/mkoneboot.sh | 16 - uart-monitor/scripts/signGP.c | 73 -- 186 files changed, 3 insertions(+), 19938 deletions(-) delete mode 100644 uart-loader/.gitignore delete mode 100644 uart-loader/Makefile delete mode 100644 uart-loader/README delete mode 100644 uart-loader/arm_config.mk delete mode 100644 uart-loader/board/omap3430labrador/Makefile delete mode 100644 uart-loader/board/omap3430labrador/config.mk delete mode 100644 uart-loader/board/omap3430labrador/omap3430labrador.c delete mode 100644 uart-loader/board/omap3430labrador/platform.S delete mode 100644 uart-loader/common/Makefile delete mode 100644 uart-loader/common/cmd_load.c delete mode 100644 uart-loader/config.mk delete mode 100644 uart-loader/cpu/omap3/Makefile delete mode 100644 uart-loader/cpu/omap3/config.mk delete mode 100644 uart-loader/cpu/omap3/cpu.c delete mode 120000 uart-loader/cpu/omap3/mmc.c delete mode 120000 uart-loader/cpu/omap3/mmc_host_def.h delete mode 120000 uart-loader/cpu/omap3/mmc_protocol.h delete mode 100644 uart-loader/cpu/omap3/start.S delete mode 100644 uart-loader/cpu/omap3/sys_info.c delete mode 100644 uart-loader/disk/Makefile delete mode 100644 uart-loader/disk/part.c delete mode 100644 uart-loader/drivers/Makefile delete mode 100644 uart-loader/drivers/k9f1g08r0a.c delete mode 100644 uart-loader/drivers/k9f5616.c delete mode 100644 uart-loader/drivers/k9k1216.c delete mode 100644 uart-loader/drivers/ns16550.c delete mode 100644 uart-loader/drivers/onenand.c delete mode 100644 uart-loader/drivers/onenand_regs.h delete mode 100644 uart-loader/drivers/serial.c delete mode 100644 uart-loader/fs/Makefile delete mode 100644 uart-loader/fs/fat/Makefile delete mode 100644 uart-loader/fs/fat/fat.c delete mode 100644 uart-loader/fs/fat/file.c delete mode 100644 uart-loader/include/asm/arch-arm1136/bits.h delete mode 120000 uart-loader/include/asm/arch-arm1136/clocks.h delete mode 120000 uart-loader/include/asm/arch-arm1136/clocks242x.h delete mode 120000 uart-loader/include/asm/arch-arm1136/clocks243x.h delete mode 120000 uart-loader/include/asm/arch-arm1136/mem.h delete mode 100644 uart-loader/include/asm/arch-arm1136/omap2420.h delete mode 100644 uart-loader/include/asm/arch-arm1136/omap2430.h delete mode 100644 uart-loader/include/asm/arch-arm1136/sizes.h delete mode 100644 uart-loader/include/asm/arch-arm1136/sys_info.h delete mode 100644 uart-loader/include/asm/arch-arm926ejs/sizes.h delete mode 120000 uart-loader/include/asm/arch-omap3/bits.h delete mode 120000 uart-loader/include/asm/arch-omap3/clocks.h delete mode 120000 uart-loader/include/asm/arch-omap3/clocks343x.h delete mode 120000 uart-loader/include/asm/arch-omap3/cpu.h delete mode 120000 uart-loader/include/asm/arch-omap3/dpll_table_34xx.S delete mode 120000 uart-loader/include/asm/arch-omap3/dpll_table_36xx.S delete mode 120000 uart-loader/include/asm/arch-omap3/mem.h delete mode 100644 uart-loader/include/asm/arch-omap3/mmc.h delete mode 120000 uart-loader/include/asm/arch-omap3/mux.h delete mode 120000 uart-loader/include/asm/arch-omap3/omap3430.h delete mode 120000 uart-loader/include/asm/arch-omap3/rev.h delete mode 120000 uart-loader/include/asm/arch-omap3/sizes.h delete mode 120000 uart-loader/include/asm/arch-omap3/sys_info.h delete mode 120000 uart-loader/include/asm/arch-omap3/sys_proto.h delete mode 100644 uart-loader/include/asm/atomic.h delete mode 120000 uart-loader/include/asm/byteorder.h delete mode 100644 uart-loader/include/asm/posix_types.h delete mode 100644 uart-loader/include/asm/setup.h delete mode 100644 uart-loader/include/asm/sizes.h delete mode 100644 uart-loader/include/asm/string.h delete mode 100644 uart-loader/include/asm/types.h delete mode 100644 uart-loader/include/asm/x-load-arm.h delete mode 120000 uart-loader/include/command.h delete mode 100644 uart-loader/include/common.h delete mode 100644 uart-loader/include/configs/omap3430labrador.h delete mode 120000 uart-loader/include/fat.h delete mode 120000 uart-loader/include/ide.h delete mode 120000 uart-loader/include/linux/byteorder delete mode 100644 uart-loader/include/linux/config.h delete mode 100644 uart-loader/include/linux/posix_types.h delete mode 120000 uart-loader/include/linux/stat.h delete mode 100644 uart-loader/include/linux/stddef.h delete mode 120000 uart-loader/include/linux/time.h delete mode 100644 uart-loader/include/linux/types.h delete mode 120000 uart-loader/include/malloc.h delete mode 120000 uart-loader/include/mmc.h delete mode 100644 uart-loader/include/ns16550.h delete mode 120000 uart-loader/include/part.h delete mode 100644 uart-loader/lib/Makefile delete mode 100644 uart-loader/lib/_udivsi3.S delete mode 100644 uart-loader/lib/_umodsi3.S delete mode 100644 uart-loader/lib/board.c delete mode 100644 uart-loader/lib/div0.c delete mode 100644 uart-loader/lib/ecc_256.c delete mode 100644 uart-loader/lib/ecc_512.c delete mode 100644 uart-loader/lib/printf.c delete mode 100755 uart-loader/mkconfig delete mode 100644 uart-loader/scripts/mkoneboot.sh delete mode 100644 uart-loader/scripts/signGP.c delete mode 100644 uart-monitor/.gitignore delete mode 100644 uart-monitor/Makefile delete mode 100644 uart-monitor/README delete mode 100644 uart-monitor/arm_config.mk delete mode 100644 uart-monitor/board/omap3430labrador/Makefile delete mode 100644 uart-monitor/board/omap3430labrador/config.mk delete mode 100644 uart-monitor/board/omap3430labrador/omap3430labrador.c delete mode 100644 uart-monitor/board/omap3430labrador/platform.S delete mode 100644 uart-monitor/common/Makefile delete mode 100644 uart-monitor/common/cmd_load.c delete mode 100644 uart-monitor/config.mk delete mode 100644 uart-monitor/cpu/omap3/Makefile delete mode 100644 uart-monitor/cpu/omap3/config.mk delete mode 100644 uart-monitor/cpu/omap3/cpu.c delete mode 120000 uart-monitor/cpu/omap3/mmc.c delete mode 120000 uart-monitor/cpu/omap3/mmc_host_def.h delete mode 120000 uart-monitor/cpu/omap3/mmc_protocol.h delete mode 100644 uart-monitor/cpu/omap3/start.S delete mode 100644 uart-monitor/cpu/omap3/sys_info.c delete mode 100644 uart-monitor/disk/Makefile delete mode 100644 uart-monitor/disk/part.c delete mode 100644 uart-monitor/drivers/Makefile delete mode 100644 uart-monitor/drivers/k9f1g08r0a.c delete mode 100644 uart-monitor/drivers/k9f5616.c delete mode 100644 uart-monitor/drivers/k9k1216.c delete mode 100644 uart-monitor/drivers/ns16550.c delete mode 100644 uart-monitor/drivers/onenand.c delete mode 100644 uart-monitor/drivers/onenand_regs.h delete mode 100644 uart-monitor/drivers/serial.c delete mode 100644 uart-monitor/fs/Makefile delete mode 100644 uart-monitor/fs/fat/Makefile delete mode 100644 uart-monitor/fs/fat/fat.c delete mode 100644 uart-monitor/fs/fat/file.c delete mode 100644 uart-monitor/include/asm/arch-arm1136/bits.h delete mode 120000 uart-monitor/include/asm/arch-arm1136/clocks.h delete mode 120000 uart-monitor/include/asm/arch-arm1136/clocks242x.h delete mode 120000 uart-monitor/include/asm/arch-arm1136/clocks243x.h delete mode 120000 uart-monitor/include/asm/arch-arm1136/mem.h delete mode 100644 uart-monitor/include/asm/arch-arm1136/omap2420.h delete mode 100644 uart-monitor/include/asm/arch-arm1136/omap2430.h delete mode 100644 uart-monitor/include/asm/arch-arm1136/sizes.h delete mode 100644 uart-monitor/include/asm/arch-arm1136/sys_info.h delete mode 100644 uart-monitor/include/asm/arch-arm926ejs/sizes.h delete mode 120000 uart-monitor/include/asm/arch-omap3/bits.h delete mode 120000 uart-monitor/include/asm/arch-omap3/clocks.h delete mode 120000 uart-monitor/include/asm/arch-omap3/clocks343x.h delete mode 120000 uart-monitor/include/asm/arch-omap3/cpu.h delete mode 120000 uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S delete mode 120000 uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S delete mode 120000 uart-monitor/include/asm/arch-omap3/mem.h delete mode 100644 uart-monitor/include/asm/arch-omap3/mmc.h delete mode 120000 uart-monitor/include/asm/arch-omap3/mux.h delete mode 120000 uart-monitor/include/asm/arch-omap3/omap3430.h delete mode 120000 uart-monitor/include/asm/arch-omap3/rev.h delete mode 120000 uart-monitor/include/asm/arch-omap3/sizes.h delete mode 120000 uart-monitor/include/asm/arch-omap3/sys_info.h delete mode 120000 uart-monitor/include/asm/arch-omap3/sys_proto.h delete mode 100644 uart-monitor/include/asm/atomic.h delete mode 120000 uart-monitor/include/asm/byteorder.h delete mode 100644 uart-monitor/include/asm/posix_types.h delete mode 100644 uart-monitor/include/asm/setup.h delete mode 100644 uart-monitor/include/asm/sizes.h delete mode 100644 uart-monitor/include/asm/string.h delete mode 100644 uart-monitor/include/asm/types.h delete mode 100644 uart-monitor/include/asm/x-load-arm.h delete mode 120000 uart-monitor/include/command.h delete mode 100644 uart-monitor/include/common.h delete mode 100644 uart-monitor/include/configs/omap3430labrador.h delete mode 120000 uart-monitor/include/fat.h delete mode 120000 uart-monitor/include/ide.h delete mode 120000 uart-monitor/include/linux/byteorder delete mode 100644 uart-monitor/include/linux/config.h delete mode 100644 uart-monitor/include/linux/posix_types.h delete mode 120000 uart-monitor/include/linux/stat.h delete mode 100644 uart-monitor/include/linux/stddef.h delete mode 120000 uart-monitor/include/linux/time.h delete mode 100644 uart-monitor/include/linux/types.h delete mode 120000 uart-monitor/include/malloc.h delete mode 120000 uart-monitor/include/mmc.h delete mode 100644 uart-monitor/include/ns16550.h delete mode 120000 uart-monitor/include/part.h delete mode 100644 uart-monitor/lib/Makefile delete mode 100644 uart-monitor/lib/_udivsi3.S delete mode 100644 uart-monitor/lib/_umodsi3.S delete mode 100644 uart-monitor/lib/board.c delete mode 100644 uart-monitor/lib/div0.c delete mode 100644 uart-monitor/lib/ecc_256.c delete mode 100644 uart-monitor/lib/ecc_512.c delete mode 100644 uart-monitor/lib/printf.c delete mode 100755 uart-monitor/mkconfig delete mode 100644 uart-monitor/scripts/mkoneboot.sh delete mode 100644 uart-monitor/scripts/signGP.c diff --git a/board/omap3530gta04/config.mk b/board/omap3530gta04/config.mk index 01eafc1..0122e2f 100644 --- a/board/omap3530gta04/config.mk +++ b/board/omap3530gta04/config.mk @@ -20,4 +20,4 @@ # initial stack at 0x4020fffc used in s_init (below xloader). # The run time stack is (above xloader, 2k below) # If any globals exist there needs to be room for them also -TEXT_BASE = 0x40208800 +TEXT_BASE = 0x40200800 diff --git a/include/configs/omap3530gta04.h b/include/configs/omap3530gta04.h index 3e6ef21..645f48f 100644 --- a/include/configs/omap3530gta04.h +++ b/include/configs/omap3530gta04.h @@ -47,7 +47,7 @@ #define CONFIG_BEAGLE_REV2 1 /* Enable the below macro if MMC boot support is required */ -//#define CONFIG_MMC 1 +#define CONFIG_MMC 1 #if defined(CONFIG_MMC) #define CFG_CMD_MMC 1 #define CFG_CMD_FAT 1 @@ -86,7 +86,7 @@ #define SDRC_R_B_C 1 /* Enable the below macro if NAND boot support is required */ -//#define CONFIG_NAND 1 +#define CONFIG_NAND 1 #define NAND_BASE_ADR NAND_BASE #define ONENAND_BASE ONENAND_MAP diff --git a/uart-loader/.gitignore b/uart-loader/.gitignore deleted file mode 100644 index 5bc6dd2..0000000 --- a/uart-loader/.gitignore +++ /dev/null @@ -1,50 +0,0 @@ -# -# NOTE! Don't add files that are generated in specific -# subdirectories here. Add them in the ".gitignore" file -# in that subdirectory instead. -# -# Normal rules -# -.* -*.o -*.o.* -*.a -*.s -*.ko -*.so -*.so.dbg -*.mod.c -*.i -*.lst -*.symtypes - -# -# Top-level generic files -# -x-load -x-load.* -System.map -include/asm/arch -include/asm/proc -include/config.h -include/config.mk -!.gitignore -signGP -MLO - -# -# Generated include files -# - -# stgit generated dirs -patches-* - -# quilt's files -patches -series - -# cscope files -cscope.* - -*.orig -*.rej diff --git a/uart-loader/Makefile b/uart-loader/Makefile deleted file mode 100644 index 73f82ec..0000000 --- a/uart-loader/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -# -# (C) Copyright 2004-2006, Texas Instruments, -# Jian Zhang -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -HOSTARCH := $(shell uname -m | \ - sed -e s/i.86/i386/ \ - -e s/sun4u/sparc64/ \ - -e s/arm.*/arm/ \ - -e s/sa110/arm/ \ - -e s/powerpc/ppc/ \ - -e s/macppc/ppc/) - -HOSTOS := $(shell uname -s | tr A-Z a-z | \ - sed -e 's/\(cygwin\).*/cygwin/') - -export HOSTARCH - -# Deal with colliding definitions from tcsh etc. -VENDOR= - -######################################################################### - -TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) -export TOPDIR - -ifeq (include/config.mk,$(wildcard include/config.mk)) -# load ARCH, BOARD, and CPU configuration -include include/config.mk -export ARCH CPU BOARD VENDOR -# load other configuration -include $(TOPDIR)/config.mk - -ifndef CROSS_COMPILE -CROSS_COMPILE = arm-none-linux-gnueabi- -#CROSS_COMPILE = arm-linux- -export CROSS_COMPILE -endif - -######################################################################### -# X-LOAD objects....order is important (i.e. start must be first) - -OBJS = cpu/$(CPU)/start.o - - -LIBS += board/$(BOARDDIR)/lib$(BOARD).a -LIBS += cpu/$(CPU)/lib$(CPU).a -LIBS += lib/lib$(ARCH).a -LIBS += fs/fat/libfat.a -LIBS += disk/libdisk.a -LIBS += drivers/libdrivers.a -LIBS += common/libcommon.a -.PHONY : $(LIBS) - -# Add GCC lib -PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc - -SUBDIRS = -######################################################################### -######################################################################### - -ALL = x-load.bin System.map - -all: $(ALL) - -ift: $(ALL) x-load.bin.ift - -x-load.bin.ift: signGP System.map x-load.bin - TEXT_BASE=`grep -w _start System.map|cut -d ' ' -f1` - ./signGP x-load.bin $(TEXT_BASE) - cp x-load.bin.ift MLO - -x-load.bin: x-load - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -x-load: $(OBJS) $(LIBS) $(LDSCRIPT) - UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ - --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ - -Map x-load.map -o x-load - -$(LIBS): - $(MAKE) -C `dirname $@` - - -System.map: x-load - @$(NM) $< | \ - grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ - sort > System.map - -oneboot: x-load.bin - scripts/mkoneboot.sh - -signGP: scripts/signGP.c - gcc -O3 -o signGP $< - -######################################################################### -else -all install x-load x-load.srec oneboot depend dep: - @echo "System not configured - see README" >&2 - @ exit 1 -endif - -######################################################################### - -unconfig: - rm -f include/config.h include/config.mk - -#======================================================================== -# ARM -#======================================================================== -######################################################################### -## OMAP1 (ARM92xT) Systems -######################################################################### - -omap1710h3_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs omap1710h3 - -######################################################################### -## OMAP2 (ARM1136) Systems -######################################################################### - -omap2420h4_config : unconfig - @./mkconfig $(@:_config=) arm arm1136 omap2420h4 - -omap2430sdp_config : unconfig - @./mkconfig $(@:_config=) arm arm1136 omap2430sdp - -######################################################################### -## OMAP3 (ARM-CortexA8) Systems -######################################################################### -omap3430sdp_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430sdp -omap3430labrador_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - -omap3430labradordownload_config : unconfig - @./mkconfig omap3430labrador arm omap3 omap3430labrador; \ - echo "#define START_LOADB_DOWNLOAD" >> ./include/config-2.h; \ - cat ./include/config.h >> ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3430zoom2_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - -omap3430zoom2_512m_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed -e ' s/CONFIG_3430ZOOM2/CONFIG_3430ZOOM2_512M/ ' < \ - ./include/configs/omap3430zoom2.h | \ - sed -e ' s/#define CFG_NAND 1/#undef CFG_NAND/ ' \ - >> ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3630zoom3_config : omap3630zoom3_1G_config - -omap3630zoom3_512m_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed s/omap3630zoom3_512m/omap3630zoom3/ < \ - ./include/config.h > ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3630zoom3_1G_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed s/CONFIG_3630ZOOM3/CONFIG_3630ZOOM3_1G/ < \ - ./include/configs/omap3630zoom3.h > ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3630sdp_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - -omap3630sdp_1G_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed s/CONFIG_3630SDP/CONFIG_3630SDP_1G/ < \ - ./include/configs/omap3630sdp.h > ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h -######################################################################### - -clean: - find . -type f \ - \( -name 'core' -o -name '*.bak' -o -name '*~' \ - -o -name '*.o' -o -name '*.a' \) -print \ - | xargs rm -f - -clobber: clean - find . -type f \ - \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \ - -print \ - | xargs rm -f - rm -f $(OBJS) *.bak tags TAGS - rm -fr *.*~ - rm -f x-load x-load.map $(ALL) x-load.bin.ift signGP MLO - rm -f include/asm/proc include/asm/arch - -mrproper \ -distclean: clobber unconfig - -backup: - F=`basename $(TOPDIR)` ; cd .. ; \ - gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F - -######################################################################### diff --git a/uart-loader/README b/uart-loader/README deleted file mode 100644 index ae2662a..0000000 --- a/uart-loader/README +++ /dev/null @@ -1,152 +0,0 @@ -# -# (C) Copyright 2004-2006 Texas Instruments -# -# Some cut/paste from U-Boot README -# (C) Copyright 2000 - 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -Summary: -======== - -This directory contains the source code for X-Loader, an initial program -loader for Embedded boards based on OMAP processors. X-Loader can be -signed by Texas Instruments IFT and installed to Nand flash to achieve -Nand booting. - - -Status: -======= - -The support for Texas Instruments H3 board (OMAP1710) has been implemented -and tested. (May 2004) -The support for Texas Instruments H4 board (OMAP2420) has been implemented -and tested. (Nov 2004) -The support for Texas Instruments 2430SDP board (OMAP2430) has been implemented -and tested. (Jul 2006) -The support for Texas Instruments 3430SDP board (OMAP3430) has been implemented -and tested. (Dec 2006) - - -Support for other OMAP boards can be added. - - -Directory Hierarchy: -==================== - -- board Board dependent files -- cpu CPU specific files -- drivers Commonly used device drivers -- lib Libraries - -- cpu/arm926ejs Files specific to ARM 926 CPUs -- cpu/arm1136 Files specific to ARM 1136 CPUs -- cpu/omap3 Files specific to ARM CortexA8 CPU - - -- board/omap1710h3 - Files specific to OMAP 1710 H3 boards -- board/omap2420h4 - Files specific to OMAP 2420 H4 boards -- board/omap2430sdp - Files specific to OMAP 2430 2430sdp boards -- board/omap3430sdp - Files specific to OMAP 3420sdp boards - - -Software Configuration: -======================= - -Configuration is usually done using C preprocessor defines. Configuration -depends on the combination of board and CPU type; all such information is -kept in a configuration file "include/configs/.h". - -Example: For a H3 module, all configuration settings are in -"include/configs/omap1710h3.h". - -For all supported boards there are ready-to-use default -configurations available; just type "make _config". - -Example: For a H3 module type: - - cd x-load - make omap1710h3_config - -After a board has been configured, type "make" to build it supposing the -needed cross tools are in your path. - - -Image Format: -============= - -X-Loader expects OS boot loader (e.g. U-Boot) in Nand flash using -JFFS2 style ECC. - - -Prepare Booting Nand Flash: -=========================== - -After you have built x-load.bin for your board, you need to do the -followings to get it into Nand flash: - -1. Use Texas Instruments IFT to sign x-load.bin. This results in a -signed image called x-load.bin.ift. -2. Use Texas Instruments FlashPrep to generate a .out file using -FlashWriterNand and specifying 0 as nand target address. -3. Use Texas instrumnets Code Composer Studio to run the .out file -which flashes x-load.bin.ift to Nand flash. - -Next you need to get your OS boot loader to Nand at the address your -X-Loader expects. For the H3 example, you can use U-Boot to flash U-Boot. -You can't use FlashWriterNand because it uses ROM code ECC style. - - -More Information -================ - -OMAP1710 NAND Booting Design Document has more information. - -Implemenation notes: -==================== -H3, H4 support NAND flash booting -2430sdp & 3430sdp support OneNAND booting - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/uart-loader/arm_config.mk b/uart-loader/arm_config.mk deleted file mode 100644 index 73d9625..0000000 --- a/uart-loader/arm_config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2000-2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ diff --git a/uart-loader/board/omap3430labrador/Makefile b/uart-loader/board/omap3430labrador/Makefile deleted file mode 100644 index c03134c..0000000 --- a/uart-loader/board/omap3430labrador/Makefile +++ /dev/null @@ -1,47 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = lib$(BOARD).a - -OBJS := omap3430labrador.o -SOBJS := platform.o - -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ - --include .depend - -######################################################################### diff --git a/uart-loader/board/omap3430labrador/config.mk b/uart-loader/board/omap3430labrador/config.mk deleted file mode 100644 index d6ad6c5..0000000 --- a/uart-loader/board/omap3430labrador/config.mk +++ /dev/null @@ -1,22 +0,0 @@ -# -# (C) Copyright 2006 -# Texas Instruments, -# -# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0 -# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 -# Physical Address: -# 8000'0000 (bank0) -# A000'0000 (bank1) - re-mappable below CS1 - -# For use if you want X-Loader to relocate from SRAM to DDR -#TEXT_BASE = 0x80e80000 - -# For XIP in 64K of SRAM or debug (GP device has it all availabe) -# SRAM 40200000-4020FFFF base -# initial stack at 0x4020fffc used in s_init (below xloader). -# The run time stack is (above xloader, 2k below) -# If any globals exist there needs to be room for them also -TEXT_BASE = 0x40208800 diff --git a/uart-loader/board/omap3430labrador/omap3430labrador.c b/uart-loader/board/omap3430labrador/omap3430labrador.c deleted file mode 100644 index 1a4e243..0000000 --- a/uart-loader/board/omap3430labrador/omap3430labrador.c +++ /dev/null @@ -1,875 +0,0 @@ -/* - * (C) Copyright 2006-2009 - * Texas Instruments, - * Jian Zhang - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Used to index into DPLL parameter tables */ -struct dpll_param { - unsigned int m; - unsigned int n; - unsigned int fsel; - unsigned int m2; -}; - -#ifdef CONFIG_OMAP36XX -struct dpll_per_param { - unsigned int sys_clk; - unsigned int m; - unsigned int n; - unsigned int clkin; - unsigned int sd; - unsigned int dco; - unsigned int m2; - unsigned int m3; - unsigned int m4; - unsigned int m5; - unsigned int m6; - unsigned int m2div; -}; -typedef struct dpll_per_param dpll_per_param; -#define MAX_SIL_INDEX 1 -#else -typedef struct dpll_param dpll_per_param; -#define MAX_SIL_INDEX 3 -#endif - -typedef struct dpll_param dpll_param; - -/* Following functions are exported from lowlevel_init.S */ -extern dpll_param * get_mpu_dpll_param(void); -extern dpll_param * get_core_dpll_param(void); -extern dpll_param * get_per_dpll_param(void); - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -/***************************************** - * Routine: board_init - * Description: Early hardware init. - *****************************************/ -int board_init (void) -{ - return 0; -} - -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - int mode; - mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); - return(mode >>= 8); -} - -/***************************************************************** - * sr32 - clear & set a value in a bit range for a 32 bit address - *****************************************************************/ -void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) -{ - u32 tmp, msk = 0; - msk = 1 << num_bits; - --msk; - tmp = __raw_readl(addr) & ~(msk << start_bit); - tmp |= value << start_bit; - __raw_writel(tmp, addr); -} - -/********************************************************************* - * wait_on_value() - common routine to allow waiting for changes in - * volatile regs. - *********************************************************************/ -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) -{ - u32 i = 0, val; - do { - ++i; - val = __raw_readl(read_addr) & read_bit_mask; - if (val == match_value) - return (1); - if (i == bound) - return (0); - } while (1); -} - -#ifdef CFG_3430SDRAM_DDR -/********************************************************************* - * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. - *********************************************************************/ -void config_3430sdram_ddr(void) -{ - /* check if its h/w or s/w reset for warm reset workaround */ - if (__raw_readl(PRM_RSTTST) & 0x2) { - /* Enable SDRC clock & wait SDRC idle status to access*/ - sr32(CM_ICLKEN1_CORE, 1, 1, 0x1); - wait_on_value(BIT1, 0, CM_IDLEST1_CORE, LDELAY); - } else { - /* do a SDRC reset between types to clear regs */ - __raw_writel(SOFTRESET, SDRC_SYSCONFIG);/* reset sdrc */ - /* wait on reset */ - wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); - __raw_writel(0, SDRC_SYSCONFIG);/* clear soft reset */ - } - /* Clear reset sources */ - __raw_writel(0xfff, PRM_RSTTST); - - /* setup sdrc to ball mux */ - __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); - - /* Configure the first chip select */ - /* set mdcfg */ - __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); - - /* set timing */ - __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); - __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); - __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_0); - - /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ - __raw_writel(CMD_NOP, SDRC_MANUAL_0); - delay(5000); - __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); - - /* set mr0 */ - __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); -#ifdef CONFIG_2GBDDR - __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); - - /* set timing */ - __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_1); - __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); - __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_1); - - /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ - __raw_writel(CMD_NOP, SDRC_MANUAL_1); - delay(5000); - __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); - - /* set mr0 */ - __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); - - /* Configure cs1 to be just behind cs0 - 128meg boundary */ -#if defined(CONFIG_3430ZOOM2_512M) || \ - defined(CONFIG_3630ZOOM3) || defined(CONFIG_3630SDP) - /* 2 * 128M = 256M for cs1 */ - __raw_writel(0x2, SDRC_CS_CFG); -#elif defined(CONFIG_3630SDP_1G) || defined(CONFIG_3630ZOOM3_1G) - /* 4 * 128M = 512M for cs1 */ - __raw_writel(0x4, SDRC_CS_CFG); -#else - /* 1 * 128M = 128M for cs1 */ - __raw_writel(0x1, SDRC_CS_CFG); -#endif - - /* set up dllB-CS1 */ - __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); - delay(0x2000); /* give time to lock */ -#endif - - /* set up dllA-CS0 */ - __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); - delay(0x2000); /* give time to lock */ - -} -#endif // CFG_3430SDRAM_DDR - -/************************************************************* - * get_sys_clk_speed - determine reference oscillator speed - * based on known 32kHz clock and gptimer. - *************************************************************/ -u32 get_osc_clk_speed(void) -{ - u32 start, cstart, cend, cdiff, val; - - val = __raw_readl(PRM_CLKSRC_CTRL); - /* If SYS_CLK is being divided by 2, remove for now */ - val = (val & (~BIT7)) | BIT6; - __raw_writel(val, PRM_CLKSRC_CTRL); - - /* enable timer2 */ - val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; - __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ - - /* Enable I and F Clocks for GPT1 */ - val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; - __raw_writel(val, CM_ICLKEN_WKUP); - val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; - __raw_writel(val, CM_FCLKEN_WKUP); - - __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ - __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ - /* enable 32kHz source *//* enabled out of reset */ - /* determine sys_clk via gauging */ - - start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ - while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ - cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ - while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ - cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ - cdiff = cend - cstart; /* get elapsed ticks */ - - /* based on number of ticks assign speed */ - if (cdiff > 19000) - return (S38_4M); - else if (cdiff > 15200) - return (S26M); - else if (cdiff > 13000) - return (S24M); - else if (cdiff > 9000) - return (S19_2M); - else if (cdiff > 7600) - return (S13M); - else - return (S12M); -} - -/****************************************************************************** - * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on - * -- input oscillator clock frequency. - * - *****************************************************************************/ -void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) -{ - if(osc_clk == S38_4M) - *sys_clkin_sel= 4; - else if(osc_clk == S26M) - *sys_clkin_sel = 3; - else if(osc_clk == S19_2M) - *sys_clkin_sel = 2; - else if(osc_clk == S13M) - *sys_clkin_sel = 1; - else if(osc_clk == S12M) - *sys_clkin_sel = 0; -} - -static dpll_per_param *_get_per_dpll(int clk_index) -{ - dpll_per_param *ret = (dpll_per_param *)get_per_dpll_param(); - ret += clk_index; - return ret; -} - -static dpll_param *_get_mpu_dpll(int clk_index, int sil_index) -{ - dpll_param *ret = (dpll_param *)get_mpu_dpll_param(); - ret += (MAX_SIL_INDEX * clk_index) + sil_index; - return ret; -} - -#ifdef CONFIG_OMAP36XX - -#define PER_M_BITS 12 -#define PER_M2_BITS 5 -#define PER_M3_BITS 6 -#define PER_M4_BITS 6 -#define PER_M5_BITS 6 -#define PER_M6_BITS 6 - -static void per_dpll_init_36XX(int clk_index) -{ - dpll_per_param *per; - - per = _get_per_dpll(clk_index); - - sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); - wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); - - sr32(CM_CLKSEL2_PLL, 8, PER_M_BITS, per->m); - sr32(CM_CLKSEL2_PLL, 0, 7, per->n); - sr32(PRM_CLKSRC_CTRL, 8, 1, per->clkin); - sr32(CM_CLKSEL2_PLL, 24, 7, per->sd); - sr32(CM_CLKSEL2_PLL, 21, 3, per->dco); - sr32(CM_CLKSEL3_PLL, 0, PER_M2_BITS, per->m2); - sr32(CM_CLKSEL_DSS, 8, PER_M3_BITS, per->m3); - sr32(CM_CLKSEL_DSS, 0, PER_M4_BITS, per->m4); - sr32(CM_CLKSEL_CAM, 0, PER_M5_BITS, per->m5); - sr32(CM_CLKSEL1_EMU, 24, PER_M6_BITS, per->m6); - sr32(CM_CLKSEL_CORE, 12, 2, per->m2div); - - sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); -} - -static void mpu_dpll_init_36XX(int clk_index, int sil_index) -{ - dpll_param *mpu; - - mpu = _get_mpu_dpll(clk_index, sil_index); - - /* MPU DPLL (unlocked already) */ - sr32(CM_CLKSEL1_PLL_MPU, 8, 11, mpu->m); - sr32(CM_CLKSEL1_PLL_MPU, 0, 7, mpu->n); - sr32(CM_CLKSEL2_PLL_MPU, 0, 5, mpu->m2); - - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); -} - -#else /* 34xx */ - -#define PER_M_BITS 11 -#define PER_M2_BITS 5 -#define PER_M3_BITS 5 -#define PER_M4_BITS 5 -#define PER_M5_BITS 5 -#define PER_M6_BITS 5 - -static void per_dpll_init_34XX(int clk_index) -{ - dpll_per_param *dpll_param_p; - - /* Getting the base address to PER DPLL param table*/ - dpll_param_p = (dpll_param *)get_per_dpll_param(); - /* Moving it to the right sysclk base */ - dpll_param_p = dpll_param_p + clk_index; - /* PER DPLL */ - sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); - wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); - sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ - sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ - sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ - sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ - sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ - sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ - sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ - sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ - sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); -} - -static void mpu_dpll_init_34XX(int clk_index, int sil_index) -{ - dpll_param *dpll_param_p; - - /* Getting the base address to MPU DPLL param table*/ - dpll_param_p = (dpll_param *)get_mpu_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; - /* MPU DPLL (unlocked already) */ - sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ - sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ - sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ - sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); -} - -#endif - -/****************************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * -- called from SRAM, or Flash (using temp SRAM stack). - *****************************************************************************/ -void prcm_init(void) -{ - u32 osc_clk=0, sys_clkin_sel; - dpll_param *dpll_param_p; - u32 clk_index, sil_index; - - /* Gauge the input clock speed and find out the sys_clkin_sel - * value corresponding to the input clock. - */ - osc_clk = get_osc_clk_speed(); - get_sys_clkin_sel(osc_clk, &sys_clkin_sel); - - sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ - -/* Using 26MHz divider straight into OMAP saves ~2ms on OFF mode restore */ -#if 0 - /* If the input clock is greater than 19.2M always divide/2 */ - if(sys_clkin_sel > 2) { - sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ - clk_index = sys_clkin_sel/2; - } else -#endif - { - sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ - clk_index = sys_clkin_sel; - } - - sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ - - /* The DPLL tables are defined according to sysclk value and - * silicon revision. The clk_index value will be used to get - * the values for that input sysclk from the DPLL param table - * and sil_index will get the values for that SysClk for the - * appropriate silicon rev. - */ -#ifdef CONFIG_OMAP36XX - sil_index = 0; -#else - if(cpu_is_3410()) - sil_index = 2; - else { - if(get_cpu_rev() == CPU_3XX_ES10) - sil_index = 0; - else if(get_cpu_rev() >= CPU_3XX_ES20) - sil_index = 1; - } -#endif - - /* Unlock MPU DPLL (slows things down, and needed later) */ - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); - wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); - - /* Getting the base address of Core DPLL param table*/ - dpll_param_p = (dpll_param *)get_core_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; - /* CORE DPLL */ - /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ - sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); - wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); - /* For 3430 ES1.0 Errata 1.50, default value directly doesnt - work. write another value and then default value. */ - sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ - sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ - sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ - sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ - sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ - sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ - sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ - sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb ES1 only */ - sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ - sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ - sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ - sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ - sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); - - /* PER DPLL */ -#ifdef CONFIG_OMAP36XX - per_dpll_init_36XX(clk_index); - mpu_dpll_init_36XX(clk_index, sil_index); -#else - per_dpll_init_34XX(clk_index); - mpu_dpll_init_34XX(clk_index, sil_index); -#endif - - /* Set up GPTimers to sys_clk source only */ - sr32(CM_CLKSEL_PER, 0, 8, 0xff); - sr32(CM_CLKSEL_WKUP, 0, 1, 1); - - delay(5000); -} - -/***************************************** - * Routine: secure_unlock - * Description: Setup security registers for access - * (GP Device only) - *****************************************/ -void secure_unlock(void) -{ - /* Permission values for registers -Full fledged permissions to all */ - #define UNLOCK_1 0xFFFFFFFF - #define UNLOCK_2 0x00000000 - #define UNLOCK_3 0x0000FFFF - /* Protection Module Register Target APE (PM_RT)*/ - __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); - __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); - __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); - __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); - - __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); - - __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); - __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); - - __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ -} - -/********************************************************** - * Routine: try_unlock_sram() - * Description: If chip is GP type, unlock the SRAM for - * general use. - ***********************************************************/ -void try_unlock_memory(void) -{ - int mode; - - /* if GP device unlock device SRAM for general use */ - /* secure code breaks for Secure/Emulation device - HS/E/T*/ - mode = get_device_type(); - if (mode == GP_DEVICE) { - secure_unlock(); - } - return; -} - -/********************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called at time when only stack is available. - **********************************************************/ - -void s_init(void) -{ - watchdog_init(); -#ifdef CONFIG_3430_AS_3410 - /* setup the scalability control register for - * 3430 to work in 3410 mode - */ - __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); -#endif - try_unlock_memory(); - set_muxconf_regs(); - delay(100); - prcm_init(); - per_clocks_enable(); - config_3430sdram_ddr(); -} - -/******************************************************* - * Routine: misc_init_r - * Description: Init ethernet (done here so udelay works) - ********************************************************/ -int misc_init_r (void) -{ - return(0); -} - -/****************************************************** - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - ******************************************************/ -void wait_for_command_complete(unsigned int wd_base) -{ - int pending = 1; - do { - pending = __raw_readl(wd_base + WWPS); - } while (pending); -} - -/**************************************** - * Routine: watchdog_init - * Description: Shut down watch dogs - *****************************************/ -void watchdog_init(void) -{ - /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is - * either taken care of by ROM (HS/EMU) or not accessible (GP). - * We need to take care of WD2-MPU or take a PRCM reset. WD3 - * should not be running and does not generate a PRCM reset. - */ - sr32(CM_FCLKEN_WKUP, 5, 1, 1); - sr32(CM_ICLKEN_WKUP, 5, 1, 1); - wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ - - __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); - wait_for_command_complete(WD2_BASE); - __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); -} - -/********************************************** - * Routine: dram_init - * Description: sets uboots idea of sdram size - **********************************************/ -int dram_init (void) -{ - return 0; -} - -/***************************************************************** - * Routine: peripheral_enable - * Description: Enable the clks & power for perifs (GPT2, UART1,...) - ******************************************************************/ -void per_clocks_enable(void) -{ - /* Enable GP2 timer. */ - sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ - sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ - sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ - -#ifdef CFG_NS16550 -////#ifdef CONFIG_SERIAL3 - sr32(CM_FCLKEN_PER, 11, 1, 0x1); - sr32(CM_ICLKEN_PER, 11, 1, 0x1); -////#else - /* Enable UART1 clocks */ - sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); - sr32(CM_ICLKEN1_CORE, 13, 5, 0x1); -////#endif -#endif - // hns: enable clock for GPIO2-6 http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/p/65520/236545.aspx - sr32(CM_FCLKEN_PER, 13, 5, 0x1f); - sr32(CM_ICLKEN_PER, 13, 5, 0x1f); - // hns: and GPIO1 - sr32(CM_FCLKEN_WKUP, 3, 1, 0x1); - sr32(CM_ICLKEN_WKUP, 3, 1, 0x1); - delay(1000); -} - -/* Set MUX for UART, GPMC, SDRC, GPIO */ - -#define MUX_VAL(OFFSET,VALUE)\ - __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); - -#define CP(x) (CONTROL_PADCONF_##x) -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_DEFAULT()\ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4 lab*/\ - MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5 lab*/\ -MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/\ - MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_IO_DIR lab*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1 lab*/\ - MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ - MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ - MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ - MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ - MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ - MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ - MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ - MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ - MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ - MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ -MUX_VAL(CP(ETK_CTL), (IEN | PTU | DIS | M4)) /*GPIO_13*/\ - MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ - MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ - MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ - MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ - MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ - MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/\ -MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ -MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ - MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ - MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ -/********************************************************** - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers - * specific to the hardware. Many pins need - * to be moved from protect to primary mode. - *********************************************************/ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -#ifdef CONFIG_2GBDDR - MUX_VAL(CP(sdrc_cke1), (IDIS | PTU | EN | M0)) /*sdrc_cke1 */ -#endif -} - -/********************************************************** - * Routine: nand+_init - * Description: Set up nand for nand and jffs2 commands - *********************************************************/ -int nand_init(void) -{ - /* global settings */ - __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ - __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ - __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ -#ifdef CFG_NAND - __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ -#endif - - /* setup CS0 for Micron NAND, leave other CS's to u-boot */ - __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); - delay(1000); - -#ifdef CFG_NAND - __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); - -#elif CFG_ONENAND /* CFG_ONENAND */ - __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); -#endif - - /* Enable the GPMC Mapping */ - __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | - ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) | - (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); - delay(2000); - -#ifdef CFG_NAND - if (nand_chip()){ -#ifdef CFG_PRINTF - printf("Unsupported Chip!\n"); -#endif - return 1; - } -#elif CFG_ONENAND - if (onenand_chip()){ -#ifdef CFG_PRINTF - printf("OneNAND Unsupported !\n"); -#endif - return 1; - } -#endif - return 0; -} - -/* optionally do something like blinking LED */ -void board_hang (void) -{ - while (1) { - printf("X-Loader hangs\n"); - } -} diff --git a/uart-loader/board/omap3430labrador/platform.S b/uart-loader/board/omap3430labrador/platform.S deleted file mode 100644 index 42dfc72..0000000 --- a/uart-loader/board/omap3430labrador/platform.S +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004-2006 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -_TEXT_BASE: - .word TEXT_BASE /* sdram load addr from config.mk */ - -#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) -/************************************************************************** - * cpy_clk_code: relocates clock code into SRAM where its safer to execute - * R1 = SRAM destination address. - *************************************************************************/ -.global cpy_clk_code - cpy_clk_code: - /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ -next2: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next2 - mov pc, lr /* back to caller */ - -/* **************************************************************************** - * NOTE: 3430 X-loader currently does not use this code. -* It could be removed its is kept for compatabily with u-boot. - * - * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed - * -executed from SRAM. - * R0 = CM_CLKEN_PLL-bypass value - * R1 = CM_CLKSEL1_PLL-m, n, and divider values - * R2 = CM_CLKSEL_CORE-divider values - * R3 = CM_IDLEST_CKGEN - addr dpll lock wait - * - * Note: If core unlocks/relocks and SDRAM is running fast already it gets - * confused. A reset of the controller gets it back. Taking away its - * L3 when its not in self refresh seems bad for it. Normally, this code - * runs from flash before SDR is init so that should be ok. - ******************************************************************************/ -.global go_to_speed - go_to_speed: - stmfd sp!, {r4-r6} - - /* move into fast relock bypass */ - ldr r4, pll_ctl_add - str r0, [r4] -wait1: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - beq wait1 /* if lock, loop */ - - /* set new dpll dividers _after_ in bypass */ - ldr r5, pll_div_add1 - str r1, [r5] /* set m, n, m2 */ - ldr r5, pll_div_add2 - str r2, [r5] /* set l3/l4/.. dividers*/ - ldr r5, pll_div_add3 /* wkup */ - ldr r2, pll_div_val3 /* rsm val */ - str r2, [r5] - ldr r5, pll_div_add4 /* gfx */ - ldr r2, pll_div_val4 - str r2, [r5] - ldr r5, pll_div_add5 /* emu */ - ldr r2, pll_div_val5 - str r2, [r5] - - /* now prepare GPMC (flash) for new dpll speed */ - /* flash needs to be stable when we jump back to it */ - ldr r5, flash_cfg3_addr - ldr r2, flash_cfg3_val - str r2, [r5] - ldr r5, flash_cfg4_addr - ldr r2, flash_cfg4_val - str r2, [r5] - ldr r5, flash_cfg5_addr - ldr r2, flash_cfg5_val - str r2, [r5] - ldr r5, flash_cfg1_addr - ldr r2, [r5] - orr r2, r2, #0x3 /* up gpmc divider */ - str r2, [r5] - - /* lock DPLL3 and wait a bit */ - orr r0, r0, #0x7 /* set up for lock mode */ - str r0, [r4] /* lock */ - nop /* ARM slow at this point working at sys_clk */ - nop - nop - nop -wait2: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - bne wait2 /* if lock, loop */ - nop - nop - nop - nop - ldmfd sp!, {r4-r6} - mov pc, lr /* back to caller, locked */ - -_go_to_speed: .word go_to_speed - -/* these constants need to be close for PIC code */ -/* The Nor has to be in the Flash Base CS0 for this condition to happen */ -flash_cfg1_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) -flash_cfg3_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) -flash_cfg3_val: - .word STNOR_GPMC_CONFIG3 -flash_cfg4_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) -flash_cfg4_val: - .word STNOR_GPMC_CONFIG4 -flash_cfg5_val: - .word STNOR_GPMC_CONFIG5 -flash_cfg5_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) -pll_ctl_add: - .word CM_CLKEN_PLL -pll_div_add1: - .word CM_CLKSEL1_PLL -pll_div_add2: - .word CM_CLKSEL_CORE -pll_div_add3: - .word CM_CLKSEL_WKUP -pll_div_val3: - .word (WKUP_RSM << 1) -pll_div_add4: - .word CM_CLKSEL_GFX -pll_div_val4: - .word (GFX_DIV << 0) -pll_div_add5: - .word CM_CLKSEL1_EMU -pll_div_val5: - .word CLSEL1_EMU_VAL - -#endif - -.globl lowlevel_init -lowlevel_init: - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -REG_CONTROL_STATUS: - .word CONTROL_STATUS -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK - -.globl get_mpu_dpll_param -get_mpu_dpll_param: - adr r0, mpu_dpll_param - mov pc, lr - -.globl get_iva_dpll_param -get_iva_dpll_param: - adr r0, iva_dpll_param - mov pc, lr - -.globl get_core_dpll_param -get_core_dpll_param: - adr r0, core_dpll_param - mov pc, lr - -.globl get_per_dpll_param -get_per_dpll_param: - adr r0, per_dpll_param - mov pc, lr - -#if defined(CONFIG_OMAP36XX) -#include -#elif defined(CONFIG_OMAP34XX) -#include -#else -#error "DPLL Table is undefined" -#endif \ No newline at end of file diff --git a/uart-loader/common/Makefile b/uart-loader/common/Makefile deleted file mode 100644 index de856cf..0000000 --- a/uart-loader/common/Makefile +++ /dev/null @@ -1,48 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = libcommon.a - -AOBJS = - -COBJS = cmd_load.o - -OBJS = $(AOBJS) $(COBJS) - -CPPFLAGS += -I.. - -all: $(LIB) $(AOBJS) - -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-loader/common/cmd_load.c b/uart-loader/common/cmd_load.c deleted file mode 100644 index 6bd07e4..0000000 --- a/uart-loader/common/cmd_load.c +++ /dev/null @@ -1,841 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Serial up- and download support - */ -#include -#include - -#define putc serial_putc -#define tstc serial_tstc - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} -static inline void udelay(unsigned long us) -{ - delay(us * 200); /* approximate */ -} - -static gpio_t *blocks[]={ // GPIO1 .. 6 - OMAP34XX_GPIO1_BASE, - OMAP34XX_GPIO2_BASE, - OMAP34XX_GPIO3_BASE, - OMAP34XX_GPIO4_BASE, - OMAP34XX_GPIO5_BASE, - OMAP34XX_GPIO6_BASE -}; - -static inline int gpio_get(int n) -{ - int bit=n % 32; - gpio_t *base=blocks[n/32]; - return (base->datain >> bit)&1; -} - -static inline int gpio_is_input(int n) -{ // geht nicht richtig - int bit=n % 32; - gpio_t *base=blocks[n/32]; - return (base->oe >> bit)&1; -} - -#ifdef CFG_CMD_FAT -extern void * memcpy(void * dest,const void *src,size_t count); -#else -void * memcpy(void * dest,const void *src,size_t count) -{ - char *tmp = (char *) dest, *s = (char *) src; - - while (count--) - *tmp++ = *s++; - - return dest; -} -#endif - -/* -------------------------------------------------------------------- */ - -#define XON_CHAR 17 -#define XOFF_CHAR 19 -#define START_CHAR 0x01 -#define ETX_CHAR 0x03 -#define END_CHAR 0x0D -#define SPACE 0x20 -#define K_ESCAPE 0x23 -#define SEND_TYPE 'S' -#define DATA_TYPE 'D' -#define ACK_TYPE 'Y' -#define NACK_TYPE 'N' -#define BREAK_TYPE 'B' -#define tochar(x) ((char) (((x) + SPACE) & 0xff)) -#define untochar(x) ((int) (((x) - SPACE) & 0xff)) - -extern int os_data_count; -extern int os_data_header[8]; - -static void set_kerm_bin_mode(unsigned long *); -static int k_recv(void); -static ulong load_serial_bin (ulong offset); - - -char his_eol; /* character he needs at end of packet */ -int his_pad_count; /* number of pad chars he needs */ -char his_pad_char; /* pad chars he needs */ -char his_quote; /* quote chars he'll use */ - -int strcmp(char *s1, char *s2) -{ - while(*s1 == *s2) { - if(*s1 == 0) - return 0; // same - s1++; - s2++; - } - return *s1 > *s2?1:-1; -} - -long xtol(char *s) -{ - long val=0; - while(1) - { - if(*s >= '0' && *s <= '9') - val=16*val+(*s++-'0'); - else if(*s >= 'A' && *s <= 'F') - val=16*val+(*s++-'A'+10); - else if(*s >= 'a' && *s <= 'f') - val=16*val+(*s++-'a'+10); - else - break; - } - return val; -} - -static char *addr=(char *) CFG_LOADADDR; -static char line[100]; -static char *argv[10]; - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) - -#define MUX_VAL(OFFSET,VALUE)\ -__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); - -#define CP(x) (CONTROL_PADCONF_##x) - -void testfn(void) -{ // code can be copied to SDRAM (assuming that it is position-independent!) - int i; - for(i=0; i<10; i++) { - if(i & 1) - MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/ - else - MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/ - udelay(500*1000); - } -} - -int do_comand_line(void) -{ // add testing code here - printf ("Welcome to uart-loader\n"); - printf (" c - run test code in RAM\n"); - printf (" x [addr] - execute\n"); - printf (" l - loop hello world\n"); - printf (" ram - fill ram with data pattern\n"); - printf (" a addr - set address\n"); - printf (" r [size] - read bytes\n"); - printf (" rl [size] - read long words\n"); - printf (" f [value [size]] - write bytes\n"); - printf (" bl - blink backlight\n"); - printf (" g - show GPIOs\n"); - printf (" m - show PinMux\n"); - return 0; - while(1) { - char *c; - int argc=0; - int pos=0; - printf ("$ "); - while(1) { - line[pos]=getc(); - switch(line[pos]) { - case '\b': - case 0x7f: - if(pos > 0) { - putc('\b'); - pos--; - } - continue; - case 0: - case '\n': - continue; // ignore - case '\r': - break; // command - default: - if(pos < sizeof(line)/sizeof(line[0])) { - putc(line[pos]); // echo - pos++; - } - continue; - } - line[pos]=0; - printf("\n"); - break; - } - c=line; - while(argc < sizeof(argv)/sizeof(argv[0])) { - while (*c == ' ' || *c == '\t') - c++; - if(*c == 0) - break; - argv[argc]=c; - while(*c != 0 && *c != '\t' && *c != ' ') - c++; - argc++; - if(*c == 0) - break; - *c=0; // substitute - c++; - } - if(argc == 0) - continue; // empty line -// printf("argc=%d argv[0]=%s\n", argc, argv[0]); - if(strcmp(argv[0], "c") == 0) { // c - copy test function to SDRAM and execute - void (*fn)(void) = &testfn; - size_t cnt = 0x1000; - addr=(char *) CFG_LOADADDR; - printf("%08x (%d) --> %08x\n", fn, cnt, addr); - memcpy(addr, fn, cnt); - (*fn)(); - } - else if(strcmp(argv[0], "x") == 0) { // x [addr] - execute code - void (*fn)(void) = addr; - if(argc > 1) - fn = (void *) xtol(argv[1]); - (*fn)(); - } - else if(strcmp(argv[0], "l") == 0) { // l - loop - int d=1; - while(1) - printf ("Welcome to uart-loader (%d)\n", d++), udelay(500*1000); - } - else if(strcmp(argv[0], "ram") == 0) { - int val=0x55; - if(argc == 2) - val=xtol(argv[1]); - for(addr=(char *) CFG_LOADADDR; addr < 256+(char *) CFG_LOADADDR; addr++) { - *addr=val++; - } - addr=(char *) CFG_LOADADDR; - } - else if(strcmp(argv[0], "a") == 0) { // a [addr] - if(argc > 1) - addr=(char *) xtol(argv[1]); - printf("%08x\n", addr); - } - else if(strcmp(argv[0], "r") == 0) { // r [size] - int i; - int n=1; - if(argc > 1) - n=xtol(argv[1]); - printf("%08x:", addr); - for(i=0; i 1) - n=xtol(argv[1]); - printf("%08x:", addr); - for(i=0; i 1) - val=xtol(argv[1]); - if(argc > 2) - n=xtol(argv[2]); - for(i=0; i datain); - printf("%03d:", 0); - for(i=0; i>= 16; - } - if(addr == 0x48002264) { - addr=0x480025DC; - printf("\n%08x", addr); - cols=0; - } - else { - addr+=4; - if(++cols == 8) - printf("\n%08x", addr), cols=0; - } - } - printf("\n"); - } - else - printf("uart-loader unknown command: %s\n", argv[0]); - } - return 0; -} - -int do_load_serial_bin (ulong offset, int baudrate) -{ - ulong addr; - int rcode = 0; - - printf ("## Ready for binary (kermit) download " - "to 0x%08lX at %d bps...\n", - offset, - baudrate); - addr = load_serial_bin (offset); - - udelay(3*1000*1000); - - if (addr == ~0) { - printf ("## Binary (kermit) download aborted\n"); - rcode = 1; - } else { - printf ("## Start Addr = 0x%08lX\n", addr); -#if 0 - udelay(3*1000*1000); - { - int i; - int n=256; - char *a=(char *) addr; - printf("%08x:", a); - for(i=0; i 0) - putc (his_pad_char); -} - -/* converts escaped kermit char to binary char */ -char ktrans (char in) -{ - if ((in & 0x60) == 0x40) { - return (char) (in & ~0x40); - } else if ((in & 0x7f) == 0x3f) { - return (char) (in | 0x40); - } else - return in; -} - -int chk1 (char *buffer) -{ - int total = 0; - - while (*buffer) { - total += *buffer++; - } - return (int) ((total + ((total >> 6) & 0x03)) & 0x3f); -} - -void s1_sendpacket (char *packet) -{ - send_pad (); - while (*packet) { - putc (*packet++); - } -} - -static char a_b[24]; -void send_ack (int n) -{ - a_b[0] = START_CHAR; - a_b[1] = tochar (3); - a_b[2] = tochar (n); - a_b[3] = ACK_TYPE; - a_b[4] = '\0'; - a_b[4] = tochar (chk1 (&a_b[1])); - a_b[5] = his_eol; - a_b[6] = '\0'; - s1_sendpacket (a_b); -} - -void send_nack (int n) -{ - a_b[0] = START_CHAR; - a_b[1] = tochar (3); - a_b[2] = tochar (n); - a_b[3] = NACK_TYPE; - a_b[4] = '\0'; - a_b[4] = tochar (chk1 (&a_b[1])); - a_b[5] = his_eol; - a_b[6] = '\0'; - s1_sendpacket (a_b); -} - - -/* os_data_* takes an OS Open image and puts it into memory, and - puts the boot header in an array named os_data_header - - if image is binary, no header is stored in os_data_header. -*/ -void (*os_data_init) (void); -void (*os_data_char) (char new_char); -static int os_data_state, os_data_state_saved; -int os_data_count; -static int os_data_count_saved; -static char *os_data_addr, *os_data_addr_saved; -static char *bin_start_address; -int os_data_header[8]; -static void bin_data_init (void) -{ - os_data_state = 0; - os_data_count = 0; - os_data_addr = bin_start_address; -} -static void os_data_save (void) -{ - os_data_state_saved = os_data_state; - os_data_count_saved = os_data_count; - os_data_addr_saved = os_data_addr; -} -static void os_data_restore (void) -{ - os_data_state = os_data_state_saved; - os_data_count = os_data_count_saved; - os_data_addr = os_data_addr_saved; -} -static void bin_data_char (char new_char) -{ - switch (os_data_state) { - case 0: /* data */ - *os_data_addr++ = new_char; - --os_data_count; - break; - } -} -static void set_kerm_bin_mode (unsigned long *addr) -{ - bin_start_address = (char *) addr; - os_data_init = bin_data_init; - os_data_char = bin_data_char; -} - - -/* k_data_* simply handles the kermit escape translations */ -static int k_data_escape, k_data_escape_saved; -void k_data_init (void) -{ - k_data_escape = 0; - os_data_init (); -} -void k_data_save (void) -{ - k_data_escape_saved = k_data_escape; - os_data_save (); -} -void k_data_restore (void) -{ - k_data_escape = k_data_escape_saved; - os_data_restore (); -} -void k_data_char (char new_char) -{ - if (k_data_escape) { - /* last char was escape - translate this character */ - os_data_char (ktrans (new_char)); - k_data_escape = 0; - } else { - if (new_char == his_quote) { - /* this char is escape - remember */ - k_data_escape = 1; - } else { - /* otherwise send this char as-is */ - os_data_char (new_char); - } - } -} - -#define SEND_DATA_SIZE 20 -char send_parms[SEND_DATA_SIZE]; -char *send_ptr; - -/* handle_send_packet interprits the protocol info and builds and - sends an appropriate ack for what we can do */ -void handle_send_packet (int n) -{ - int length = 3; - int bytes; - - /* initialize some protocol parameters */ - his_eol = END_CHAR; /* default end of line character */ - his_pad_count = 0; - his_pad_char = '\0'; - his_quote = K_ESCAPE; - - /* ignore last character if it filled the buffer */ - if (send_ptr == &send_parms[SEND_DATA_SIZE - 1]) - --send_ptr; - bytes = send_ptr - send_parms; /* how many bytes we'll process */ - do { - if (bytes-- <= 0) - break; - /* handle MAXL - max length */ - /* ignore what he says - most I'll take (here) is 94 */ - a_b[++length] = tochar (94); - if (bytes-- <= 0) - break; - /* handle TIME - time you should wait for my packets */ - /* ignore what he says - don't wait for my ack longer than 1 second */ - a_b[++length] = tochar (1); - if (bytes-- <= 0) - break; - /* handle NPAD - number of pad chars I need */ - /* remember what he says - I need none */ - his_pad_count = untochar (send_parms[2]); - a_b[++length] = tochar (0); - if (bytes-- <= 0) - break; - /* handle PADC - pad chars I need */ - /* remember what he says - I need none */ - his_pad_char = ktrans (send_parms[3]); - a_b[++length] = 0x40; /* He should ignore this */ - if (bytes-- <= 0) - break; - /* handle EOL - end of line he needs */ - /* remember what he says - I need CR */ - his_eol = untochar (send_parms[4]); - a_b[++length] = tochar (END_CHAR); - if (bytes-- <= 0) - break; - /* handle QCTL - quote control char he'll use */ - /* remember what he says - I'll use '#' */ - his_quote = send_parms[5]; - a_b[++length] = '#'; - if (bytes-- <= 0) - break; - /* handle QBIN - 8-th bit prefixing */ - /* ignore what he says - I refuse */ - a_b[++length] = 'N'; - if (bytes-- <= 0) - break; - /* handle CHKT - the clock check type */ - /* ignore what he says - I do type 1 (for now) */ - a_b[++length] = '1'; - if (bytes-- <= 0) - break; - /* handle REPT - the repeat prefix */ - /* ignore what he says - I refuse (for now) */ - a_b[++length] = 'N'; - if (bytes-- <= 0) - break; - /* handle CAPAS - the capabilities mask */ - /* ignore what he says - I only do long packets - I don't do windows */ - a_b[++length] = tochar (2); /* only long packets */ - a_b[++length] = tochar (0); /* no windows */ - a_b[++length] = tochar (94); /* large packet msb */ - a_b[++length] = tochar (94); /* large packet lsb */ - } while (0); - - a_b[0] = START_CHAR; - a_b[1] = tochar (length); - a_b[2] = tochar (n); - a_b[3] = ACK_TYPE; - a_b[++length] = '\0'; - a_b[length] = tochar (chk1 (&a_b[1])); - a_b[++length] = his_eol; - a_b[++length] = '\0'; - s1_sendpacket (a_b); -} - -/* k_recv receives a OS Open image file over kermit line */ -static int k_recv (void) -{ - char new_char; - char k_state, k_state_saved; - int sum; - int done; - int length; - int n, last_n; - int z = 0; - int len_lo, len_hi; - - /* initialize some protocol parameters */ - his_eol = END_CHAR; /* default end of line character */ - his_pad_count = 0; - his_pad_char = '\0'; - his_quote = K_ESCAPE; - - /* initialize the k_recv and k_data state machine */ - done = 0; - k_state = 0; - k_data_init (); - k_state_saved = k_state; - k_data_save (); - n = 0; /* just to get rid of a warning */ - last_n = -1; - - /* expect this "type" sequence (but don't check): - S: send initiate - F: file header - D: data (multiple) - Z: end of file - B: break transmission - */ - - /* enter main loop */ - while (!done) { - /* set the send packet pointer to begining of send packet parms */ - send_ptr = send_parms; - - /* With each packet, start summing the bytes starting with the length. - Save the current sequence number. - Note the type of the packet. - If a character less than SPACE (0x20) is received - error. - */ - -#if 0 - /* OLD CODE, Prior to checking sequence numbers */ - /* first have all state machines save current states */ - k_state_saved = k_state; - k_data_save (); -#endif - - /* get a packet */ - /* wait for the starting character or ^C */ - for (;;) { - switch (getc ()) { - case START_CHAR: /* start packet */ - goto START; - case ETX_CHAR: /* ^C waiting for packet */ - return (0); - default: - ; - } - } -START: - /* get length of packet */ - sum = 0; - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - sum += new_char & 0xff; - length = untochar (new_char); - /* get sequence number */ - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - sum += new_char & 0xff; - n = untochar (new_char); - --length; - - /* NEW CODE - check sequence numbers for retried packets */ - /* Note - this new code assumes that the sequence number is correctly - * received. Handling an invalid sequence number adds another layer - * of complexity that may not be needed - yet! At this time, I'm hoping - * that I don't need to buffer the incoming data packets and can write - * the data into memory in real time. - */ - if (n == last_n) { - /* same sequence number, restore the previous state */ - k_state = k_state_saved; - k_data_restore (); - } else { - /* new sequence number, checkpoint the download */ - last_n = n; - k_state_saved = k_state; - k_data_save (); - } - /* END NEW CODE */ - - /* get packet type */ - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - sum += new_char & 0xff; - k_state = new_char; - --length; - /* check for extended length */ - if (length == -2) { - /* (length byte was 0, decremented twice) */ - /* get the two length bytes */ - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - sum += new_char & 0xff; - len_hi = untochar (new_char); - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - sum += new_char & 0xff; - len_lo = untochar (new_char); - length = len_hi * 95 + len_lo; - /* check header checksum */ - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f)) - goto packet_error; - sum += new_char & 0xff; -/* --length; */ /* new length includes only data and block check to come */ - } - /* bring in rest of packet */ - while (length > 1) { - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - sum += new_char & 0xff; - --length; - if (k_state == DATA_TYPE) { - /* pass on the data if this is a data packet */ - k_data_char (new_char); - } else if (k_state == SEND_TYPE) { - /* save send pack in buffer as is */ - *send_ptr++ = new_char; - /* if too much data, back off the pointer */ - if (send_ptr >= &send_parms[SEND_DATA_SIZE]) - --send_ptr; - } - } - /* get and validate checksum character */ - new_char = getc (); - if ((new_char & 0xE0) == 0) - goto packet_error; - if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f)) - goto packet_error; - /* get END_CHAR */ - new_char = getc (); - if (new_char != END_CHAR) { - packet_error: - /* restore state machines */ - k_state = k_state_saved; - k_data_restore (); - /* send a negative acknowledge packet in */ - send_nack (n); - } else if (k_state == SEND_TYPE) { - /* crack the protocol parms, build an appropriate ack packet */ - handle_send_packet (n); - } else { - /* send simple acknowledge packet in */ - send_ack (n); - /* quit if end of transmission */ - if (k_state == BREAK_TYPE) - done = 1; - } - ++z; - } - return ((ulong) os_data_addr - (ulong) bin_start_address); -} diff --git a/uart-loader/config.mk b/uart-loader/config.mk deleted file mode 100644 index 1365b9d..0000000 --- a/uart-loader/config.mk +++ /dev/null @@ -1,175 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -######################################################################### - -# clean the slate ... -PLATFORM_RELFLAGS = -PLATFORM_CPPFLAGS = -PLATFORM_LDFLAGS = - -# -# When cross-compiling on NetBSD, we have to define __PPC__ or else we -# will pick up a va_list declaration that is incompatible with the -# actual argument lists emitted by the compiler. -# -# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3] - -ifeq ($(ARCH),ppc) -ifeq ($(CROSS_COMPILE),powerpc-netbsd-) -PLATFORM_CPPFLAGS+= -D__PPC__ -endif -ifeq ($(CROSS_COMPILE),powerpc-openbsd-) -PLATFORM_CPPFLAGS+= -D__PPC__ -endif -endif - -ifeq ($(ARCH),arm) -ifeq ($(CROSS_COMPILE),powerpc-netbsd-) -PLATFORM_CPPFLAGS+= -D__ARM__ -endif -ifeq ($(CROSS_COMPILE),powerpc-openbsd-) -PLATFORM_CPPFLAGS+= -D__ARM__ -endif -endif - -ifdef ARCH -sinclude $(TOPDIR)/$(ARCH)_config.mk # include architecture dependend rules -endif -ifdef CPU -sinclude $(TOPDIR)/cpu/$(CPU)/config.mk # include CPU specific rules -endif -ifdef VENDOR -BOARDDIR = $(VENDOR)/$(BOARD) -else -BOARDDIR = $(BOARD) -endif -ifdef BOARD -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.mk # include board specific rules -endif - -######################################################################### - -CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ - else if [ -x /bin/bash ]; then echo /bin/bash; \ - else echo sh; fi ; fi) - -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) -HOSTCC = cc -else -HOSTCC = gcc -endif -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -HOSTSTRIP = strip - -######################################################################### -# -# Option checker (courtesy linux kernel) to ensure -# only supported compiler options are used -# -cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ - > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) - -# -# Include the make variables (CC, etc...) -# -AS = $(CROSS_COMPILE)as -LD = $(CROSS_COMPILE)ld -CC = $(CROSS_COMPILE)gcc -CPP = $(CC) -E -AR = $(CROSS_COMPILE)ar -NM = $(CROSS_COMPILE)nm -STRIP = $(CROSS_COMPILE)strip -OBJCOPY = $(CROSS_COMPILE)objcopy -OBJDUMP = $(CROSS_COMPILE)objdump -RANLIB = $(CROSS_COMPILE)RANLIB - -RELFLAGS= $(PLATFORM_RELFLAGS) -DBGFLAGS= -g # -DDEBUG -OPTFLAGS= -Os #-fomit-frame-pointer -ifndef LDSCRIPT -#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds.debug -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds -endif -OBJCFLAGS += --gap-fill=0xff - -gccincdir := $(shell $(CC) -print-file-name=include) - -CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \ - -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \ - -I$(TOPDIR)/include \ - -fno-builtin -ffreestanding -nostdinc -isystem \ - $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) - -ifdef BUILD_TAG -CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \ - -DBUILD_TAG='"$(BUILD_TAG)"' -else -CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -endif - -AFLAGS_DEBUG := -Wa,-gstabs -AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS) - -LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) - -# Location of a usable BFD library, where we define "usable" as -# "built for ${HOST}, supports ${TARGET}". Sensible values are -# - When cross-compiling: the root of the cross-environment -# - Linux/ppc (native): /usr -# - NetBSD/ppc (native): you lose ... (must extract these from the -# binutils build directory, plus the native and U-Boot include -# files don't like each other) -# -# So far, this is used only by tools/gdb/Makefile. - -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) -BFD_ROOT_DIR = /usr/local/tools -else -ifeq ($(HOSTARCH),$(ARCH)) -# native -BFD_ROOT_DIR = /usr -else -#BFD_ROOT_DIR = /LinuxPPC/CDK # Linux/i386 -#BFD_ROOT_DIR = /usr/pkg/cross # NetBSD/i386 -BFD_ROOT_DIR = /opt/powerpc -endif -endif - -######################################################################### - -export CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \ - AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP \ - MAKE -export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS - -######################################################################### - -%.s: %.S - $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$< -%.o: %.S - $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$< -%.o: %.c - $(CC) $(CFLAGS) -c -o $@ $< - -######################################################################### diff --git a/uart-loader/cpu/omap3/Makefile b/uart-loader/cpu/omap3/Makefile deleted file mode 100644 index fca0dad..0000000 --- a/uart-loader/cpu/omap3/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = lib$(CPU).a - -START = start.o -OBJS = cpu.o mmc.o sys_info.o - -all: .depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-loader/cpu/omap3/config.mk b/uart-loader/cpu/omap3/config.mk deleted file mode 100644 index 71547f3..0000000 --- a/uart-loader/cpu/omap3/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 - -# PLATFORM_CPPFLAGS += -march=armv7-a -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) -PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/uart-loader/cpu/omap3/cpu.c b/uart-loader/cpu/omap3/cpu.c deleted file mode 100644 index 1cf422a..0000000 --- a/uart-loader/cpu/omap3/cpu.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2004-2006 Texas Insturments - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * CPU specific code - */ -#include - -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ -#define C1_WB (1<<3) /* merging write buffer on/off */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - -int cpu_init (void) -{ - return 0; -} - diff --git a/uart-loader/cpu/omap3/mmc.c b/uart-loader/cpu/omap3/mmc.c deleted file mode 120000 index ca45f14..0000000 --- a/uart-loader/cpu/omap3/mmc.c +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/cpu/omap3/mmc.c \ No newline at end of file diff --git a/uart-loader/cpu/omap3/mmc_host_def.h b/uart-loader/cpu/omap3/mmc_host_def.h deleted file mode 120000 index d40a0a1..0000000 --- a/uart-loader/cpu/omap3/mmc_host_def.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/cpu/omap3/mmc_host_def.h \ No newline at end of file diff --git a/uart-loader/cpu/omap3/mmc_protocol.h b/uart-loader/cpu/omap3/mmc_protocol.h deleted file mode 120000 index f79c007..0000000 --- a/uart-loader/cpu/omap3/mmc_protocol.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/cpu/omap3/mmc_protocol.h \ No newline at end of file diff --git a/uart-loader/cpu/omap3/start.S b/uart-loader/cpu/omap3/start.S deleted file mode 100644 index 142c425..0000000 --- a/uart-loader/cpu/omap3/start.S +++ /dev/null @@ -1,230 +0,0 @@ -/* - * armboot - Startup Code for OMP2420/ARM1136 CPU-core - * - * Copyright (c) 2004-2006 Texas Instruments - * - * Copyright (c) 2001 Marius Gröger - * Copyright (c) 2002 Alex Züpke - * Copyright (c) 2002 Gary Jennejohn - * Copyright (c) 2003 Richard Woodruff - * Copyright (c) 2003 Kshitij - * Copyright (c) 2004 Jian Zhang - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -.globl _start -_start: - b reset - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - -_hang: - .word do_hang - - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 /* now 16*4=64 */ - -.global _end_vect -_end_vect: - - .balignl 16,0xdeadbeef -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack - * - ************************************************************************* - */ - -_TEXT_BASE: - .word TEXT_BASE - -.globl _armboot_start -_armboot_start: - .word _start - -/* - * These are defined in the board-specific linker script. - */ -.globl _bss_start -_bss_start: - .word __bss_start - -.globl _bss_end -_bss_end: - .word _end - -/* - * the actual reset code - */ - -reset: - ldr r4, scratchpad /* r4 <- scratchpad reg address */ - ldr r5, [r0, #0x4] /* r5 <- value of boot device */ - str r5, [r4] /* store r5 in scratchpad reg */ - - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - - bl cpy_clk_code /* put dpll adjust code behind vectors */ - - /* the mask ROM code should have PLL and others stable */ - bl cpu_init_crit - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* no need to relocate if XIP */ - beq stack_setup /* skip txt cpy if XIP(SRAM, SDRAM) */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub sp, r0, #128 /* leave 32 words for abort-stack */ - and sp, sp, #~7 /* 8 byte alinged for (ldr/str)d */ - - /* Clear BSS (if any). Is below tx (watch load addr - need space) */ -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear value */ -clbss_l: - str r2, [r0] /* clear BSS location */ - cmp r0, r1 /* are we at the end yet */ - add r0, r0, #4 /* increment clear index pointer */ - bne clbss_l /* keep clearing till at end */ - - ldr pc, _start_armboot /* jump to C code */ - -_start_armboot: .word start_armboot - - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ -cpu_init_crit: - /* - * Invalidate L1 I/D - */ - mov r0, #0 /* set up for MCR */ - mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr p15, 0, r0, c7, c5, 1 /* invalidate icache */ - - /* Invalide L2 cache (gp device call point) - * - warning, this may have issues on EMU/HS devices - * this call can corrupt r0-r5 - */ - mov r12, #0x1 @ set up to invalide L2 -smi: .word 0xE1600070 @ Call SMI monitor - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002000 @ clear bits 13 (--V-) - bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) - orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align -#ifndef CONFIG_ICACHE_OFF - orr r0, r0, #0x00001800 @ set bit 11,12 (---I Z---) BTB,I-Cache -#endif - mcr p15, 0, r0, c1, c0, 0 - - /* - * Jump to board specific initialization... The Mask ROM will have already initialized - * basic memory. Go here to bump up clock rate and handle wake up conditions. - */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* pass on info about skipping some init portions */ - moveq r0,#0x1 /* flag to skip prcm and sdrc setup */ - movne r0,#0x0 - - mov ip, lr /* persevere link reg across call */ - bl lowlevel_init /* go setup pll,mux,memory */ - mov lr, ip /* restore link */ - mov pc, lr /* back to my caller */ - -/* - * exception handler - */ - .align 5 -do_hang: - ldr sp, _TEXT_BASE /* use 32 words abort stack */ - bl hang /* hang and never return */ - -scratchpad: - .word 0x480029c0 diff --git a/uart-loader/cpu/omap3/sys_info.c b/uart-loader/cpu/omap3/sys_info.c deleted file mode 100644 index 9a14d0e..0000000 --- a/uart-loader/cpu/omap3/sys_info.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (c) 2009 Wind River Systems, Inc. - * Tom Rix - * - * Derived from board specific omap code by - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - -/* - * get_cpu_rev(void) - extract version info - */ -u32 get_cpu_rev(void) -{ - u32 cpuid = 0; - ctrl_id_t *id_base; - /* - * On ES1.0 the IDCODE register is not exposed on L4 - * so using CPU ID to differentiate between ES1.0 and > ES1.0. - */ - __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); - if ((cpuid & 0xf) == 0x0) - return CPU_3XX_ES10; - else { - /* Decode the IDs on > ES1.0 */ - id_base = (ctrl_id_t *) OMAP34XX_ID_L4_IO_BASE; - - cpuid = (__raw_readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf; - - /* Some early ES2.0 seem to report ID 0, fix this */ - if (cpuid == 0) - cpuid = CPU_3XX_ES20; - - return cpuid; - } -} - -/* - * cpu_is_3410(void) - returns true for 3410 - */ -u32 cpu_is_3410(void) -{ - int status; - if(get_cpu_rev() < CPU_3XX_ES20) { - return 0; - } else { - /* read scalability status and return 1 for 3410*/ - status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); - /* Check whether MPU frequency is set to 266 MHz which - * is nominal for 3410. If yes return true else false - */ - if (((status >> 8) & 0x3) == 0x2) - return 1; - else - return 0; - } -} - diff --git a/uart-loader/disk/Makefile b/uart-loader/disk/Makefile deleted file mode 100644 index 7da4624..0000000 --- a/uart-loader/disk/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -#CFLAGS += -DET_DEBUG -DDEBUG - -LIB = libdisk.a - -OBJS = part.o - -all: $(LIB) - -$(LIB): $(START) $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-loader/disk/part.c b/uart-loader/disk/part.c deleted file mode 100644 index a367f13..0000000 --- a/uart-loader/disk/part.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#undef PART_DEBUG - -#ifdef PART_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ - (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - -/* ------------------------------------------------------------------------- */ -/* - * reports device info to the user - */ -void dev_print (block_dev_desc_t *dev_desc) -{ -#ifdef CONFIG_LBA48 - uint64_t lba512; /* number of blocks if 512bytes block size */ -#else - lbaint_t lba512; -#endif - - if (dev_desc->type==DEV_TYPE_UNKNOWN) { - return; - } - if (dev_desc->if_type==IF_TYPE_SCSI) { - printf ("(%d:%d) ", dev_desc->target,dev_desc->lun); - } - if (dev_desc->if_type==IF_TYPE_IDE) { - printf ("Model: %s Firm: %s Ser#: %s\n", - dev_desc->vendor, - dev_desc->revision, - dev_desc->product); - } else { - printf ("Vendor: %s Prod.: %s Rev: %s\n", - dev_desc->vendor, - dev_desc->product, - dev_desc->revision); - } - printf (" Type: "); - switch (dev_desc->type & 0x1F) { - case DEV_TYPE_HARDDISK: printf ("Hard Disk"); - break; - case DEV_TYPE_CDROM: printf ("CD ROM"); - break; - case DEV_TYPE_OPDISK: printf ("Optical Device"); - break; - case DEV_TYPE_TAPE: printf ("Tape"); - break; - default: printf ("# %02X #", dev_desc->type & 0x1F); - break; - } - if ((dev_desc->lba * dev_desc->blksz)>0L) { - ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem; - lbaint_t lba; - - lba = dev_desc->lba; - - lba512 = (lba * (dev_desc->blksz/512)); - mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */ - /* round to 1 digit */ - mb_quot = mb / 10; - mb_rem = mb - (10 * mb_quot); - - gb = mb / 1024; - gb_quot = gb / 10; - gb_rem = gb - (10 * gb_quot); -#ifdef CONFIG_LBA48 - if (dev_desc->lba48) - printf (" Supports 48-bit addressing\n"); -#endif -#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF) - printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n", - mb_quot, mb_rem, - gb_quot, gb_rem, - lba, - dev_desc->blksz); -#else - printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n", - mb_quot, mb_rem, - gb_quot, gb_rem, - (ulong)lba, - dev_desc->blksz); -#endif - } else { - printf (" Capacity: not available\n"); - } -} -#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */ - -#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ - (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || \ - (CONFIG_COMMANDS & CFG_CMD_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - -#if defined(CONFIG_MAC_PARTITION) || \ - defined(CONFIG_DOS_PARTITION) || \ - defined(CONFIG_ISO_PARTITION) || \ - defined(CONFIG_AMIGA_PARTITION) - -void init_part (block_dev_desc_t * dev_desc) -{ -#ifdef CONFIG_ISO_PARTITION - if (test_part_iso(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_ISO; - return; - } -#endif - -#ifdef CONFIG_MAC_PARTITION - if (test_part_mac(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_MAC; - return; - } -#endif - -#ifdef CONFIG_DOS_PARTITION - if (test_part_dos(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_DOS; - return; - } -#endif - -#ifdef CONFIG_AMIGA_PARTITION - if (test_part_amiga(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_AMIGA; - return; - } -#endif -} - - -int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info) -{ - switch (dev_desc->part_type) { -#ifdef CONFIG_MAC_PARTITION - case PART_TYPE_MAC: - if (get_partition_info_mac(dev_desc,part,info) == 0) { - PRINTF ("## Valid MAC partition found ##\n"); - return (0); - } - break; -#endif - -#ifdef CONFIG_DOS_PARTITION - case PART_TYPE_DOS: - if (get_partition_info_dos(dev_desc,part,info) == 0) { - PRINTF ("## Valid DOS partition found ##\n"); - return (0); - } - break; -#endif - -#ifdef CONFIG_ISO_PARTITION - case PART_TYPE_ISO: - if (get_partition_info_iso(dev_desc,part,info) == 0) { - PRINTF ("## Valid ISO boot partition found ##\n"); - return (0); - } - break; -#endif - -#ifdef CONFIG_AMIGA_PARTITION - case PART_TYPE_AMIGA: - if (get_partition_info_amiga(dev_desc, part, info) == 0) - { - PRINTF ("## Valid Amiga partition found ##\n"); - return (0); - } - break; -#endif - default: - break; - } - return (-1); -} - -static void print_part_header (const char *type, block_dev_desc_t * dev_desc) -{ - switch (dev_desc->if_type) { - case IF_TYPE_IDE: printf ("IDE"); - break; - case IF_TYPE_SCSI: printf ("SCSI"); - break; - case IF_TYPE_ATAPI: printf ("ATAPI"); - break; - case IF_TYPE_USB: printf ("USB"); - break; - case IF_TYPE_DOC: printf ("DOC"); - break; - default: printf ("UNKNOWN"); - break; - } - printf (" device %d -- Partition Type: %s\n\n", - dev_desc->dev, type); -} - -void print_part (block_dev_desc_t * dev_desc) -{ - - switch (dev_desc->part_type) { -#ifdef CONFIG_MAC_PARTITION - case PART_TYPE_MAC: - PRINTF ("## Testing for valid MAC partition ##\n"); - print_part_header ("MAC", dev_desc); - print_part_mac (dev_desc); - return; -#endif -#ifdef CONFIG_DOS_PARTITION - case PART_TYPE_DOS: - PRINTF ("## Testing for valid DOS partition ##\n"); - print_part_header ("DOS", dev_desc); - print_part_dos (dev_desc); - return; -#endif - -#ifdef CONFIG_ISO_PARTITION - case PART_TYPE_ISO: - PRINTF ("## Testing for valid ISO Boot partition ##\n"); - print_part_header ("ISO", dev_desc); - print_part_iso (dev_desc); - return; -#endif - -#ifdef CONFIG_AMIGA_PARTITION - case PART_TYPE_AMIGA: - PRINTF ("## Testing for a valid Amiga partition ##\n"); - print_part_header ("AMIGA", dev_desc); - print_part_amiga (dev_desc); - return; -#endif - } -} - - -#else /* neither MAC nor DOS nor ISO partition configured */ -# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured! -#endif - -#endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */ diff --git a/uart-loader/drivers/Makefile b/uart-loader/drivers/Makefile deleted file mode 100644 index ffc38b3..0000000 --- a/uart-loader/drivers/Makefile +++ /dev/null @@ -1,70 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -# CFLAGS += -DET_DEBUG -DDEBUG - -LIB = libdrivers.a -OBJS = serial.o ns16550.o onenand.o - -ifeq ($(BOARD), omap3430sdp) -OBJS += k9f1g08r0a.o -endif - -ifeq ($(BOARD), omap3430labrador) -OBJS += k9f1g08r0a.o -endif - -ifeq ($(BOARD), omap2420h4) -OBJS += k9k1216.o -endif - -ifeq ($(BOARD), omap2430sdp) -OBJS += k9k1216.o -endif - -ifeq ($(BOARD), omap1710h3) -OBJS += k9f5616.o -endif - - -## Disabled for now: -## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \ -## lan91c96.o mw_eeprom.o natsemi.o \ -## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \ -## - -all: $(LIB) - -$(LIB): $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-loader/drivers/k9f1g08r0a.c b/uart-loader/drivers/k9f1g08r0a.c deleted file mode 100644 index f0d6452..0000000 --- a/uart-loader/drivers/k9f1g08r0a.c +++ /dev/null @@ -1,512 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * Jian Zhang - * - * Samsung K9F1G08R0AQ0C NAND chip driver for an OMAP2420 board - * - * This file is based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#include -#include - -#ifdef CFG_NAND_K9F1G08R0A - -#define K9F1G08R0A_MFR 0xec /* Samsung */ -#define K9F1G08R0A_ID 0xa1 /* part # */ - -/* Since Micron and Samsung parts are similar in geometry and bus width - * we can use the same driver. Need to revisit to make this file independent - * of part/manufacturer - */ -#define MT29F1G_MFR 0x2c /* Micron */ -#define MT29F1G_ID 0xa1 /* x8, 1GiB */ -#define MT29F2G_ID 0xba /* x16, 2GiB */ -#define MT29F4G_ID 0xbc /* x16, 4GiB */ - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE (ADDR_COLUMN | ADDR_PAGE) - -#define ADDR_OOB (0x4 | ADDR_COLUMN_PAGE) - -#define PAGE_SIZE 2048 -#define OOB_SIZE 64 -#define MAX_NUM_PAGES 64 - -#ifdef NAND_HW_ROMCODE_ECC_LAYOUT -#define __raw_ecc_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_ecc_writel(v, a) (*(volatile unsigned int *)(a) = (v)) -/* Register definitions */ -#define GPMC_BASE_ADDR OMAP34XX_GPMC_BASE - -#define ECCCLEAR (0x1 << 8) -#define ECCRESULTREG1 (0x1 << 0) -#define ECCSIZE512BYTE 0xFF -#define ECCSIZE1 (ECCSIZE512BYTE << 22) -#define ECCSIZE0 (ECCSIZE512BYTE << 12) -#define ECCSIZE0SEL (0x000 << 0) - -#define ECC_BLOCK_SIZE 512 -#ifdef NAND_16BIT -#define DEV_WIDTH 1 -static u_char ecc_pos[] = { 2, 3, 4, 5, 6, 7, 8, 9, - 10, 11, 12, 13 -}; -#else -#define DEV_WIDTH 0 -static u_char ecc_pos[] = { 1, 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12 -}; -#endif - -#else -#ifdef NAND_16BIT -#define DEV_WIDTH 1 -#else -#define DEV_WIDTH 0 -#endif - -#ifdef CFG_SW_ECC_512 -#define ECC_BLOCK_SIZE 512 -#else -#define ECC_BLOCK_SIZE 256 -#endif -/* JFFS2 large page layout for 3-byte ECC per 256 bytes ECC layout */ -/* This is the only SW ECC supported by u-boot. So to load u-boot - * this should be supported */ -static u_char ecc_pos[] = {40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}; - -#endif - -#define ECC_SIZE (sizeof(ecc_pos)) -#define ECC_STEPS 3 -#define ECC_CHECK_ENABLE - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %0, #1\n" - "bne 1b" : "=r" (loops) : "0" (loops)); -} - -static int nand_read_page(u_char *buf, ulong page_addr); -static int nand_read_oob(u_char *buf, ulong page_addr); - -static unsigned long chipsize = (256 << 20); - -/* NanD_Command: Send a flash command to the flash chip */ -static int NanD_Command(unsigned char command) -{ - NAND_CTL_SETCLE(NAND_ADDR); - - WRITE_NAND_COMMAND(command, NAND_ADDR); - NAND_CTL_CLRCLE(NAND_ADDR); - - if (command == NAND_CMD_RESET) { - unsigned char ret_val; - NanD_Command(NAND_CMD_STATUS); - do { - ret_val = READ_NAND(NAND_ADDR); /* wait till ready */ - } while ((ret_val & 0x40) != 0x40); - } - - NAND_WAIT_READY(); - return 0; -} - - -/* NanD_Address: Set the current address for the flash chip */ -static int NanD_Address(unsigned int numbytes, unsigned long ofs) -{ - uchar u; - - NAND_CTL_SETALE(NAND_ADDR); - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE - || numbytes == ADDR_OOB) - { - ushort col = ofs; - - u = col & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - - u = (col >> 8) & 0x07; - if (numbytes == ADDR_OOB) - u = u | ((DEV_WIDTH == 1) ? (1 << 2) : (1 << 3)); - WRITE_NAND_ADDRESS(u, NAND_ADDR); - } - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE - || numbytes == ADDR_OOB) - { - u = (ofs >> 11) & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - u = (ofs >> 19) & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - - /* One more address cycle for devices > 128MiB */ - if (chipsize > (128 << 20)) { - u = (ofs >> 27) & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - } - } - - NAND_CTL_CLRALE(NAND_ADDR); - - NAND_WAIT_READY(); - return 0; -} - -/* read chip mfr and id - * return 0 if they match board config - * return 1 if not - */ -int nand_chip() -{ - int mfr, id; - - NAND_ENABLE_CE(); - - if (NanD_Command(NAND_CMD_RESET)) { - printf("Err: RESET\n"); - NAND_DISABLE_CE(); - return 1; - } - - if (NanD_Command(NAND_CMD_READID)) { - printf("Err: READID\n"); - NAND_DISABLE_CE(); - return 1; - } - - NanD_Address(ADDR_COLUMN, 0); - - mfr = READ_NAND(NAND_ADDR); - id = READ_NAND(NAND_ADDR); - - NAND_DISABLE_CE(); - - /* Check Micron part or Samsung part */ - if ((mfr == MT29F1G_MFR && (id == MT29F1G_ID || - id == MT29F2G_ID || id == MT29F4G_ID)) || - (mfr == K9F1G08R0A_MFR && (id == K9F1G08R0A_ID))) - return 0; - - return 1; -} - -/* read a block data to buf - * return 1 if the block is bad or ECC error can't be corrected for any page - * return 0 on sucess - */ -int nand_read_block(unsigned char *buf, ulong block_addr) -{ - int i, offset = 0; - -#ifdef ECC_CHECK_ENABLE - u8 oob_buf[OOB_SIZE]; - - /* check bad block */ - /* 0th word in spare area needs be 0xff */ - if (nand_read_oob(oob_buf, block_addr) || (oob_buf[0] & 0xff) != 0xff) { - printf("Skipped bad block at 0x%x\n", block_addr); - return 1; /* skip bad block */ - } -#endif - /* read the block page by page*/ - for (i = 0; i < MAX_NUM_PAGES; i++) { - if (nand_read_page(buf + offset, block_addr + offset)) - return 1; - offset += PAGE_SIZE; - } - - return 0; -} - -#ifdef NAND_HW_ROMCODE_ECC_LAYOUT -/* - * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in - * GPMC controller - * - */ -static void omap_hwecc_init(void) -{ - /* - * Init ECC Control Register - * Clear all ECC | Enable Reg1 - */ - __raw_ecc_writel(ECCCLEAR | ECCRESULTREG1, - GPMC_BASE_ADDR + GPMC_ECC_CONTROL); - __raw_ecc_writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, - GPMC_BASE_ADDR + GPMC_ECC_SIZE_CONFIG); - __raw_ecc_writel(0x1 | (0 << 1) | (DEV_WIDTH << 7), - GPMC_BASE_ADDR + GPMC_ECC_CONFIG); -} - -/* - * gen_true_ecc - This function will generate true ECC value, which - * can be used when correcting data read from NAND flash memory core - * - * @ecc_buf: buffer to store ecc code - * - * @return: re-formatted ECC value - */ -static uint32_t gen_true_ecc(uint8_t *ecc_buf) -{ - return ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xF0) << 20) | - ((ecc_buf[2] & 0x0F) << 8); -} - -/* - * omap_calculate_ecc - Generate non-inverted ECC bytes. - * - * Using noninverted ECC can be considered ugly since writing a blank - * page ie. padding will clear the ECC bytes. This is no problem as - * long nobody is trying to write data on the seemingly unused page. - * Reading an erased page will produce an ECC mismatch between - * generated and read ECC bytes that has to be dealt with separately. - * E.g. if page is 0xFF (fresh erased), and if HW ECC engine within GPMC - * is used, the result of read will be 0x0 while the ECC offsets of the - * spare area will be 0xFF which will result in an ECC mismatch. - * @dat: unused - * @ecc_code: ecc_code buffer - */ -static int omap_calculate_ecc(const uint8_t *dat, uint8_t *ecc_code) -{ - u_int32_t val; - - /* Start Reading from HW ECC1_Result = 0x200 */ - val = __raw_ecc_readl(GPMC_BASE_ADDR + GPMC_ECC1_RESULT); - - ecc_code[0] = val & 0xFF; - ecc_code[1] = (val >> 16) & 0xFF; - ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0); - - /* - * Stop reading anymore ECC vals and clear old results - * enable will be called if more reads are required - */ - __raw_ecc_writel(0x000, GPMC_BASE_ADDR + GPMC_ECC_CONFIG); - - return 0; -} - -static int hweight32(unsigned int val) -{ - u_char count = 0; - for ( ; val; count++) - val &= (val - 1); - return count; -} - -/* - * omap_correct_data - Compares the ecc read from nand spare area with ECC - * registers values and corrects one bit error if it has occured - * Further details can be had from OMAP TRM and the following selected links: - * http://en.wikipedia.org/wiki/Hamming_code - * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf - * - * @dat: page data - * @read_ecc: ecc read from nand flash - * @calc_ecc: ecc read from ECC registers - * - * @return 0 if data is OK or corrected, else returns -1 - */ -static int omap_correct_data(uint8_t *dat, - uint8_t *read_ecc, uint8_t *calc_ecc) -{ - uint32_t orig_ecc, new_ecc, res, hm; - uint16_t parity_bits, byte; - uint8_t bit; - - /* Regenerate the orginal ECC */ - orig_ecc = gen_true_ecc(read_ecc); - new_ecc = gen_true_ecc(calc_ecc); - /* Get the XOR of real ecc */ - res = orig_ecc ^ new_ecc; - if (res) { - /* Get the hamming width */ - hm = hweight32(res); - /* Single bit errors can be corrected! */ - if (hm == 12) { - /* Correctable data! */ - parity_bits = res >> 16; - bit = (parity_bits & 0x7); - byte = (parity_bits >> 3) & 0x1FF; - /* Flip the bit to correct */ - dat[byte] ^= (0x1 << bit); - } else if (hm == 1) { - printf("Error: Ecc is wrong\n"); - /* ECC itself is corrupted */ - return 2; - } else { - /* - * hm distance != parity pairs OR one, could mean 2 bit - * error OR potentially be on a blank page.. - * orig_ecc: contains spare area data from nand flash. - * new_ecc: generated ecc while reading data area. - * Note: if the ecc = 0, all data bits from which it was - * generated are 0xFF. - * The 3 byte(24 bits) ecc is generated per 512byte - * chunk of a page. If orig_ecc(from spare area) - * is 0xFF && new_ecc(computed now from data area)=0x0, - * this means that data area is 0xFF and spare area is - * 0xFF. A sure sign of a erased page! - */ - if ((orig_ecc == 0x0FFF0FFF) && (new_ecc == 0x00000000)) - return 0; - printf("Error: Bad compare! failed\n"); - /* detected 2 bit error */ - return -1; - } - } - return 0; -} - -#define NAND_ECC_INIT() omap_hwecc_init() -#define NAND_ECC_CALC(data_buf, ecc_buf) omap_calculate_ecc(data_buf, ecc_buf) -#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\ - omap_correct_data(data_buf, ecc_gen, ecc_old) -#else -/* Software ECC APIs */ -#define NAND_ECC_INIT() -#define NAND_ECC_CALC(data_buf, ecc_buf) nand_calculate_ecc(data_buf, ecc_buf) -#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\ - nand_correct_data(data_buf, ecc_gen, ecc_old) -#endif /* NAND_HW_ROMCODE_ECC_LAYOUT */ - -/* read a page with ECC */ -static int nand_read_page(u_char *buf, ulong page_addr) -{ -#ifdef ECC_CHECK_ENABLE - u_char ecc_code[ECC_SIZE]; - u_char ecc_calc[ECC_SIZE]; - u_char oob_buf[OOB_SIZE]; -#endif - u16 val; - int cntr; - int len; - int count; - -#ifdef NAND_16BIT - u16 *p = (u16 *) buf; -#else - u_char *p = (u_char *) buf; -#endif - - NAND_ENABLE_CE(); - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_COLUMN_PAGE, page_addr); - NanD_Command(NAND_CMD_READSTART); - NAND_WAIT_READY(); - - /* A delay seems to be helping here. needs more investigation */ - delay(10000); - len = (DEV_WIDTH == 1) ? ECC_BLOCK_SIZE >> 1 : ECC_BLOCK_SIZE; - - /* Read in chunks of data. */ - for (count = 0; count < ECC_SIZE; count += ECC_STEPS) { - NAND_ECC_INIT(); - for (cntr = 0; cntr < len; cntr++) { - *p++ = READ_NAND(NAND_ADDR); - delay(10); - } - NAND_ECC_CALC((p - ECC_BLOCK_SIZE), &ecc_calc[count]); - } - -#ifdef ECC_CHECK_ENABLE -#ifdef NAND_16BIT - p = (u16 *) oob_buf; -#else - p = (u_char *) oob_buf; -#endif - len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE; - for (cntr = 0; cntr < len; cntr++) { - *p++ = READ_NAND(NAND_ADDR); - delay(10); - } - count = 0; - NAND_DISABLE_CE(); /* set pin high */ - - /* Pick the ECC bytes out of the oob data */ - for (cntr = 0; cntr < ECC_SIZE; cntr++) - ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; - - for (count = 0, cntr = 0; cntr < PAGE_SIZE / ECC_BLOCK_SIZE; - cntr++, count += ECC_STEPS) { - if (NAND_ECC_CORRECT(buf, &ecc_code[count], &ecc_calc[count]) - == -1) { - printf("ECC Failed, page 0x%08x\n", page_addr); - for (val = 0; val < ECC_BLOCK_SIZE; val++) - printf("%x ", buf[val]); - printf(" Hang!!!\n"); - for (;;); - return 1; - } - buf += ECC_BLOCK_SIZE; - page_addr += ECC_BLOCK_SIZE; - } -#endif - return 0; -} - -/* read from the 16 bytes of oob data that correspond to a 512 / 2048 byte page. - */ -static int nand_read_oob(u_char *buf, ulong page_addr) -{ - int cntr; - int len; - -#ifdef NAND_16BIT - u16 *p = (u16 *) buf; -#else - u_char *p = (u_char *) buf; -#endif - len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE; - - NAND_ENABLE_CE(); /* set pin low */ - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_OOB, page_addr); - NanD_Command(NAND_CMD_READSTART); - NAND_WAIT_READY(); - - /* A delay seems to be helping here. needs more investigation */ - delay(10000); - for (cntr = 0; cntr < len; cntr++) - *p++ = READ_NAND(NAND_ADDR); - - NAND_WAIT_READY(); - NAND_DISABLE_CE(); /* set pin high */ - - return 0; -} - -#endif diff --git a/uart-loader/drivers/k9f5616.c b/uart-loader/drivers/k9f5616.c deleted file mode 100644 index 4081664..0000000 --- a/uart-loader/drivers/k9f5616.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * Jian Zhang - * - * Samsung K9F5616Q0C NAND chip driver for an OMAP16xx board - * - * This file is based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CFG_NAND_K9F5616 - -#define K9F5616_MFR 0xec -#define K9F5616_ID 0x45 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define PAGE_SIZE 512 - -static int nand_read_page(u_char *buf, ulong page_addr); -static int nand_read_oob(u_char * buf, ulong page_addr); - -/* JFFS2 512-byte-page ECC layout */ -static u_char ecc_pos[] = {0,1,2,3,6,7}; -static u_char eccvalid_pos = 4; - -/* NanD_Command: Send a flash command to the flash chip */ -static int NanD_Command(unsigned char command) -{ - NAND_CTL_SETCLE(NAND_ADDR); - WRITE_NAND_COMMAND(command, NAND_ADDR); - NAND_CTL_CLRCLE(NAND_ADDR); - - if(command == NAND_CMD_RESET){ - unsigned char ret_val; - NanD_Command(NAND_CMD_STATUS); - do{ - ret_val = READ_NAND(NAND_ADDR);/* wait till ready */ - } while((ret_val & 0x40) != 0x40); - } - - NAND_WAIT_READY(); - return 0; -} - -/* NanD_Address: Set the current address for the flash chip */ -static int NanD_Address(int numbytes, unsigned long ofs) -{ - int i; - - NAND_CTL_SETALE(NAND_ADDR); - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - ofs = ofs >> 8; - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) - for (i = 0; i < 2; i++, ofs = ofs >> 8) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - NAND_CTL_CLRALE(NAND_ADDR); - - NAND_WAIT_READY(); - return 0; -} - -/* read chip mfr and id - * return 0 if they match board config - * return 1 if not - */ -int nand_chip() -{ - int mfr, id; - - NAND_ENABLE_CE(); - - if (NanD_Command(NAND_CMD_RESET)) { - printf("Err: RESET\n"); - NAND_DISABLE_CE(); - return 1; - } - - if (NanD_Command(NAND_CMD_READID)) { - printf("Err: READID\n"); - NAND_DISABLE_CE(); - return 1; - } - - NanD_Address(ADDR_COLUMN, 0); - - mfr = READ_NAND(NAND_ADDR); - id = READ_NAND(NAND_ADDR); - - NAND_DISABLE_CE(); - - return (mfr != K9F5616_MFR || id != K9F5616_ID); -} - -/* read a block data to buf - * return 1 if the block is bad or ECC error can't be corrected for any page - * return 0 on sucess - */ -int nand_read_block(unsigned char *buf, ulong block_addr) -{ - int i, offset = 0; - uchar oob_buf[16]; - - /* check bad block */ - /* 0th and 5th words need be 0xffff */ - if (nand_read_oob(oob_buf, block_addr) || -// oob_buf[0] != 0xff || oob_buf[1] != 0xff || -// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){ - oob_buf[5] != 0xff){ - printf("Skipped bad block at 0x%x\n", block_addr); - return 1; /* skip bad block */ - } - - /* read the block page by page*/ - for (i=0; i<32; i++){ - if (nand_read_page(buf+offset, block_addr + offset)) - return 1; - offset += PAGE_SIZE; - } - - return 0; -} - -/* read a page with ECC */ -static int nand_read_page(u_char *buf, ulong page_addr) -{ - u_char ecc_code[6]; - u_char ecc_calc[3]; - u_char oob_buf[16]; - u_char *p; - u16 val; - int cntr; - - NAND_ENABLE_CE(); - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1); - - NAND_WAIT_READY(); - p = buf; - for (cntr = 0; cntr < 256; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - - p = oob_buf; - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - NAND_DISABLE_CE(); /* set pin high */ - - /* Pick the ECC bytes out of the oob data */ - for (cntr = 0; cntr < 6; cntr++) - ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; - - - if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) { - nand_calculate_ecc (buf, &ecc_calc[0]); - if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr); - return 1; - } - } - - if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) { - nand_calculate_ecc (buf + 256, &ecc_calc[0]); - if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr+0x100); - return 1; - } - } - - return 0; -} - -/* read from the 16 bytes of oob data that correspond to a 512 byte page. - */ -static int nand_read_oob(u_char *buf, ulong page_addr) -{ - u16 val; - int cntr; - - NAND_ENABLE_CE(); /* set pin low */ - NanD_Command(NAND_CMD_READOOB); - NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1); - NAND_WAIT_READY(); - - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *buf++ = val & 0xff; - *buf++ = val >> 8; - } - - NAND_WAIT_READY(); - NAND_DISABLE_CE(); /* set pin high */ - - return 0; -} - -#endif diff --git a/uart-loader/drivers/k9k1216.c b/uart-loader/drivers/k9k1216.c deleted file mode 100644 index 888fb6b..0000000 --- a/uart-loader/drivers/k9k1216.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * Jian Zhang - * - * Samsung K9K1216Q0C NAND chip driver for an OMAP2420 board - * - * This file is based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CFG_NAND_K9K1216 - -#define K9K1216_MFR 0xec -#define K9K1216_ID 0x46 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define PAGE_SIZE 512 -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -static int nand_read_page(u_char *buf, ulong page_addr); -static int nand_read_oob(u_char * buf, ulong page_addr); - -/* JFFS2 512-byte-page ECC layout */ -static u_char ecc_pos[] = {0,1,2,3,6,7}; -static u_char eccvalid_pos = 4; - -/* NanD_Command: Send a flash command to the flash chip */ -static int NanD_Command(unsigned char command) -{ - NAND_CTL_SETCLE(NAND_ADDR); - WRITE_NAND_COMMAND(command, NAND_ADDR); - NAND_CTL_CLRCLE(NAND_ADDR); - - if(command == NAND_CMD_RESET){ - unsigned char ret_val; - NanD_Command(NAND_CMD_STATUS); - do{ - ret_val = READ_NAND(NAND_ADDR);/* wait till ready */ - } while((ret_val & 0x40) != 0x40); - } - - NAND_WAIT_READY(); - return 0; -} - -/* NanD_Address: Set the current address for the flash chip */ -static int NanD_Address(int numbytes, unsigned long ofs) -{ - int i; - - NAND_CTL_SETALE(NAND_ADDR); - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - ofs = ofs >> 9; - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) - for (i = 0; i < 3; i++, ofs = ofs >> 8) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - NAND_CTL_CLRALE(NAND_ADDR); - - NAND_WAIT_READY(); - return 0; -} - -/* read chip mfr and id - * return 0 if they match board config - * return 1 if not - */ -int nand_chip() -{ - int mfr, id; - - NAND_ENABLE_CE(); - - if (NanD_Command(NAND_CMD_RESET)) { - printf("Err: RESET\n"); - NAND_DISABLE_CE(); - return 1; - } - - if (NanD_Command(NAND_CMD_READID)) { - printf("Err: READID\n"); - NAND_DISABLE_CE(); - return 1; - } - - NanD_Address(ADDR_COLUMN, 0); - - mfr = READ_NAND(NAND_ADDR); - id = READ_NAND(NAND_ADDR); - - NAND_DISABLE_CE(); - - return (mfr != K9K1216_MFR || id != K9K1216_ID); -} - -/* read a block data to buf - * return 1 if the block is bad or ECC error can't be corrected for any page - * return 0 on sucess - */ -int nand_read_block(unsigned char *buf, ulong block_addr) -{ - int i, offset = 0; - uchar oob_buf[16]; - - /* check bad block */ - /* 0th and 5th words need be 0xffff */ - if (nand_read_oob(oob_buf, block_addr) || -// oob_buf[0] != 0xff || oob_buf[1] != 0xff || -// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){ - oob_buf[5] != 0xff){ - printf("Skipped bad block at 0x%x\n", block_addr); - return 1; /* skip bad block */ - } - - /* read the block page by page*/ - for (i=0; i<32; i++){ - if (nand_read_page(buf+offset, block_addr + offset)) - return 1; - offset += PAGE_SIZE; - } - - return 0; -} -static count = 0; -/* read a page with ECC */ -static int nand_read_page(u_char *buf, ulong page_addr) -{ - u_char ecc_code[6]; - u_char ecc_calc[3]; - u_char oob_buf[16]; - u_char *p; - u16 val; - int cntr; - - NAND_ENABLE_CE(); - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_COLUMN_PAGE, page_addr); - NAND_WAIT_READY(); - - delay(500); /* we go through NFC need a bigger delay. 200 is not enough */ - - p = buf; - for (cntr = 0; cntr < 256; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - - p = oob_buf; - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - count = 1; - NAND_DISABLE_CE(); /* set pin high */ - - /* Pick the ECC bytes out of the oob data */ - for (cntr = 0; cntr < 6; cntr++) - ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; - - if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) { - nand_calculate_ecc (buf, &ecc_calc[0]); - if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr); - for (val=0; val <256; val++) - printf("%x ", buf[val]); - printf("\n"); - for (;;); - return 1; - } - } - - if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) { - nand_calculate_ecc (buf + 256, &ecc_calc[0]); - if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr+0x100); - for (val=0; val <256; val++) - printf("%x ", buf[val+256]); - printf("\n"); - for (;;); - return 1; - } - } - - return 0; -} - -/* read from the 16 bytes of oob data that correspond to a 512 byte page. - */ -static int nand_read_oob(u_char *buf, ulong page_addr) -{ - u16 val; - int cntr; - - NAND_ENABLE_CE(); /* set pin low */ - NanD_Command(NAND_CMD_READOOB); - NanD_Address(ADDR_COLUMN_PAGE, page_addr); - NAND_WAIT_READY(); - -/* do { - *(volatile u32 *)(0x6800A07c) = NAND_CMD_STATUS; - val = *(volatile u32 *)(0x6800A084); - printf("val = %x\n", val); - } while ((val & 0x40) != 0x40); -*/ - /* the above code from OSTBoot doesn't work, we use delay */ - delay(500); /* we go through NFC need a bigger delay. 200 is not enough */ - - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *buf++ = val & 0xff; - *buf++ = val >> 8; - } - - NAND_WAIT_READY(); - NAND_DISABLE_CE(); /* set pin high */ - - return 0; -} - -#endif diff --git a/uart-loader/drivers/ns16550.c b/uart-loader/drivers/ns16550.c deleted file mode 100644 index b5a5c12..0000000 --- a/uart-loader/drivers/ns16550.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * COM1 NS16550 support - * originally from linux source (arch/ppc/boot/ns16550.c) - * modified to use CFG_ISA_MEM and new defines - */ - -#include - -#ifdef CFG_PRINTF -#ifdef CFG_NS16550 - -#include - -#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */ -#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */ -#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */ - -void NS16550_init (NS16550_t com_port, int baud_divisor) -{ - com_port->ier = 0x00; -#ifdef CONFIG_OMAP - com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ -#endif - com_port->lcr = LCR_BKSE | LCRVAL; - com_port->dll = baud_divisor & 0xff; - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCRVAL; - com_port->mcr = MCRVAL; - com_port->fcr = FCRVAL; -#if defined(CONFIG_OMAP) - com_port->mdr1 = 0; /* select uart mode */ -#endif -} - -void NS16550_reinit (NS16550_t com_port, int baud_divisor) -{ - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE; - com_port->dll = baud_divisor & 0xff; - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCRVAL; - com_port->mcr = MCRVAL; - com_port->fcr = FCRVAL; -} - -void NS16550_putc (NS16550_t com_port, char c) -{ - while ((com_port->lsr & LSR_THRE) == 0); - com_port->thr = c; -} - -char NS16550_getc (NS16550_t com_port) -{ - while ((com_port->lsr & LSR_DR) == 0); - return (com_port->rbr); -} - -int NS16550_tstc (NS16550_t com_port) -{ - return ((com_port->lsr & LSR_DR) != 0); -} - -#endif -#endif diff --git a/uart-loader/drivers/onenand.c b/uart-loader/drivers/onenand.c deleted file mode 100644 index 7d4e454..0000000 --- a/uart-loader/drivers/onenand.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * (C) Copyright 2005 Samsung Electronis - * Kyungmin Park - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#include - -#include "onenand_regs.h" - -#define onenand_readw(a) (*(volatile unsigned short *)(a)) -#define onenand_writew(v, a) ((*(volatile unsigned short *)(a)) = (u16) (v)) - -#define SAMSUNG_MFR_ID 0xEC -#define KFM1G16Q2A_DEV_ID 0x30 -#define KFN2G16Q2A_DEV_ID 0x40 - -#ifdef CFG_ONENAND - -#define THIS_ONENAND(a) (ONENAND_ADDR + (a)) - -#define READ_INTERRUPT() \ - onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT)) - -#define SET_EMIFS_CS_CONFIG(v) \ - (*(volatile unsigned long *)(OMAP_EMIFS_CS_CONFIG) = (v)) - -#define onenand_block_address(block) (block) -#define onenand_sector_address(page) (page << 2) -#define onenand_buffer_address() ((1 << 3) << 8) -#define onenand_bufferram_address(block) (0) - -#if defined(CFG_SYNC_BURST_READ) && defined(CONFIG_OMAP1610) -static inline void set_sync_burst_read(void) -{ - unsigned int value; - value = 0 - | (0x1 << 15) /* Read Mode: Synchronous */ - | (0x4 << 12) /* Burst Read Latency: 4 cycles */ - | (0x4 << 9) /* Burst Length: 8 word */ - | (0x1 << 7) /* RDY signal plarity */ - | (0x1 << 6) /* INT signal plarity */ - | (0x1 << 5) /* I/O buffer enable */ - ; - onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1)); - - value = 0 - | (4 << 16) /* Synchronous Burst Read */ - | (1 << 12) /* PGWST/WELEN */ - | (1 << 8) /* WRWST */ - | (4 << 4) /* RDWST */ - | (1 << 0) /* FCLKDIV => 48MHz */ - ; - SET_EMIFS_CS_CONFIG(value); -} - -static inline void set_async_read(void) -{ - unsigned int value; - value = 0 - | (0x0 << 15) /* Read Mode: Asynchronous */ - | (0x4 << 12) /* Burst Read Latency: 4 cycles */ - | (0x0 << 9) /* Burst Length: continuous */ - | (0x1 << 7) /* RDY signal plarity */ - | (0x1 << 6) /* INT signal plarity */ - | (0x0 << 5) /* I/O buffer disable */ - ; - onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1)); - - value = 0 - | (0 << 16) /* Asynchronous Read */ - | (1 << 12) /* PGWST/WELEN */ - | (1 << 8) /* WRWST */ - | (3 << 4) /* RDWST */ - | (1 << 0) /* FCLKDIV => 48MHz */ - ; - SET_EMIFS_CS_CONFIG(value); -} -#else -#define set_sync_burst_read(...) do { } while (0) -#define set_async_read(...) do { } while (0) -#endif - -int -onenand_chip() -{ - unsigned short mf_id, dev_id; - mf_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_MANUFACTURER_ID))); - dev_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_DEVICE_ID))); - - if(mf_id == SAMSUNG_MFR_ID) { - if (dev_id == KFM1G16Q2A_DEV_ID) { - printf("Detected Samsung MuxOneNAND1G Flash \r\n"); - return 0; - } else if (dev_id == KFN2G16Q2A_DEV_ID) { - printf("Detected Samsung MuxOneNAND2G Flash \r\n"); - return 0; - } else { - printf(" ONENAND Flash unsupported\r\n"); - return 1; - } - } else { - printf("ONENAND Flash Unsupported\r\n"); - return 1; - } -} - -/* read a page with ECC */ -static inline int onenand_read_page(ulong block, ulong page, u_char *buf) -{ - unsigned long *base; - -#ifndef __HAVE_ARCH_MEMCPY32 - unsigned int offset, value; - unsigned long *p; -#endif - - onenand_writew(onenand_block_address(block), - THIS_ONENAND(ONENAND_REG_START_ADDRESS1)); - - onenand_writew(onenand_sector_address(page), - THIS_ONENAND(ONENAND_REG_START_ADDRESS8)); - - onenand_writew(onenand_buffer_address(), - THIS_ONENAND(ONENAND_REG_START_BUFFER)); - - onenand_writew(onenand_bufferram_address(block), - THIS_ONENAND(ONENAND_REG_START_ADDRESS2)); - - onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT)); - - onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND)); - -#ifndef __HAVE_ARCH_MEMCPY32 - p = (unsigned long *) buf; -#endif - base = (unsigned long *) (ONENAND_ADDR + ONENAND_DATARAM); - - while (!(READ_INTERRUPT() & ONENAND_INT_MASTER)) - continue; - -#ifdef __HAVE_ARCH_MEMCPY32 - /* 32 bytes boundary memory copy */ - memcpy32(buf, base, ONENAND_PAGE_SIZE); -#else - for (offset = 0; offset < (ONENAND_PAGE_SIZE >> 2); offset++) { - value = *(base + offset); - *p++ = value; - } -#endif - - return 0; -} - -#define ONENAND_START_PAGE 0 -#define ONENAND_PAGES_PER_BLOCK 64 - -/** - * onenand_read_block - Read a block data to buf - * @return 0 on sucess - */ - -int onenand_read_block(unsigned char *buf, ulong block) -{ - int page, offset = 0; - - set_sync_burst_read(); - - /* NOTE: you must read page from page 1 of block 0 */ - /* read the block page by page*/ - for (page = ONENAND_START_PAGE; - page < ONENAND_PAGES_PER_BLOCK; page++) { - - onenand_read_page(block, page, buf + offset); - - offset += ONENAND_PAGE_SIZE; - } - - set_async_read(); - - return 0; -} - -#endif /* CFG_ONENAND */ diff --git a/uart-loader/drivers/onenand_regs.h b/uart-loader/drivers/onenand_regs.h deleted file mode 100644 index d8acc8c..0000000 --- a/uart-loader/drivers/onenand_regs.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * linux/include/linux/mtd/onenand_regs.h - * - * OneNAND Register header file - * - * Copyright (C) 2005 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ONENAND_REG_H -#define __ONENAND_REG_H - -/* Memory Address Map Translation (Word order) */ -#define ONENAND_MEMORY_MAP(x) ((x) << 1) - -/* - * External BufferRAM area - */ -#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) -#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) -#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) - -/* - * OneNAND Registers - */ -#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) -#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) -#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) -#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) -#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) -#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) -#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) - -#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100) -#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101) -#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102) -#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103) -#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104) -#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105) -#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106) -#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107) - -#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200) -#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220) -#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221) -#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222) -#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240) -#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241) -#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C) -#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D) -#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E) - -#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00) -#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01) -#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02) -#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03) -#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04) -#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05) -#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06) -#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07) -#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08) - -/* - * Device ID Register F001h (R) - */ -#define ONENAND_DEVICE_DENSITY_SHIFT (4) -#define ONENAND_DEVICE_IS_DDP (1 << 3) -#define ONENAND_DEVICE_IS_DEMUX (1 << 2) -#define ONENAND_DEVICE_VCC_MASK (0x3) - -#define ONENAND_DEVICE_DENSITY_512Mb (0x002) - -/* - * Version ID Register F002h (R) - */ -#define ONENAND_VERSION_PROCESS_SHIFT (8) - -/* - * Start Address 1 F100h (R/W) - */ -#define ONENAND_DDP_SHIFT (15) - -/* - * Start Address 8 F107h (R/W) - */ -#define ONENAND_FPA_MASK (0x3f) -#define ONENAND_FPA_SHIFT (2) -#define ONENAND_FSA_MASK (0x03) - -/* - * Start Buffer Register F200h (R/W) - */ -#define ONENAND_BSA_MASK (0x03) -#define ONENAND_BSA_SHIFT (8) -#define ONENAND_BSA_BOOTRAM (0 << 2) -#define ONENAND_BSA_DATARAM0 (2 << 2) -#define ONENAND_BSA_DATARAM1 (3 << 2) -#define ONENAND_BSC_MASK (0x03) - -/* - * Command Register F220h (R/W) - */ -#define ONENAND_CMD_READ (0x00) -#define ONENAND_CMD_READOOB (0x13) -#define ONENAND_CMD_PROG (0x80) -#define ONENAND_CMD_PROGOOB (0x1A) -#define ONENAND_CMD_UNLOCK (0x23) -#define ONENAND_CMD_LOCK (0x2A) -#define ONENAND_CMD_LOCK_TIGHT (0x2C) -#define ONENAND_CMD_ERASE (0x94) -#define ONENAND_CMD_RESET (0xF0) -#define ONENAND_CMD_READID (0x90) - -/* NOTE: Those are not *REAL* commands */ -#define ONENAND_CMD_BUFFERRAM (0x1978) - -/* - * System Configuration 1 Register F221h (R, R/W) - */ -#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15) -#define ONENAND_SYS_CFG1_BRL (12) -#define ONENAND_SYS_CFG1_BL (9) -#define ONENAND_SYS_CFG1_NO_ECC (1 << 8) -#define ONENAND_SYS_CFG1_RDY (1 << 7) -#define ONENAND_SYS_CFG1_INT (1 << 6) -#define ONENAND_SYS_CFG1_IOBE (1 << 5) -#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4) - -/* - * Controller Status Register F240h (R) - */ -#define ONENAND_CTRL_ONGO (1 << 15) -#define ONENAND_CTRL_LOCK (1 << 14) -#define ONENAND_CTRL_LOAD (1 << 13) -#define ONENAND_CTRL_PROGRAM (1 << 12) -#define ONENAND_CTRL_ERASE (1 << 11) -#define ONENAND_CTRL_ERROR (1 << 10) -#define ONENAND_CTRL_RSTB (1 << 7) - -/* - * Interrupt Status Register F241h (R) - */ -#define ONENAND_INT_MASTER (1 << 15) -#define ONENAND_INT_READ (1 << 7) -#define ONENAND_INT_WRITE (1 << 6) -#define ONENAND_INT_ERASE (1 << 5) -#define ONENAND_INT_RESET (1 << 4) -#define ONENAND_INT_CLEAR (0 << 0) - -/* - * NAND Flash Write Protection Status Register F24Eh (R) - */ -#define ONENAND_WP_US (1 << 2) -#define ONENAND_WP_LS (1 << 1) -#define ONENAND_WP_LTS (1 << 0) - -/* - * ECC Status Reigser FF00h (R) - */ -#define ONENAND_ECC_1BIT (1 << 0) -#define ONENAND_ECC_2BIT (1 << 1) -#define ONENAND_ECC_2BIT_ALL (0xAAAA) - -#endif /* __ONENAND_REG_H */ diff --git a/uart-loader/drivers/serial.c b/uart-loader/drivers/serial.c deleted file mode 100644 index b9ecf2a..0000000 --- a/uart-loader/drivers/serial.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CFG_PRINTF -#ifdef CFG_NS16550_SERIAL - -#include -#ifdef CFG_NS87308 -#include -#endif - -#if CONFIG_CONS_INDEX == 1 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM1; -#elif CONFIG_CONS_INDEX == 2 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM2; -#elif CONFIG_CONS_INDEX == 3 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM3; -#elif CONFIG_CONS_INDEX == 4 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM4; -#else -#error no valid console defined -#endif - -static int calc_divisor (void) -{ -// DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_OMAP1510 - /* If can't cleanly clock 115200 set div to 1 */ - if ((CFG_NS16550_CLK == 12000000) && (CONFIG_BAUDRATE == 115200)) { - console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */ - return (1); /* return 1 for base divisor */ - } - console->osc_12m_sel = 0; /* clear if previsouly set */ -#endif -#if defined(CONFIG_OMAP1610) || defined(CONFIG_OMAP1710) - /* If can't cleanly clock 115200 set div to 1 */ - if ((CFG_NS16550_CLK == 48000000) && (CONFIG_BAUDRATE == 115200)) { - return (26); /* return 26 for base divisor */ - } -#endif - return (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE); -} - -int serial_init (void) -{ - int clock_divisor = calc_divisor(); - -#ifdef CFG_NS87308 - initialise_ns87308(); -#endif - - NS16550_init(console, clock_divisor); - - return (0); -} - -void -serial_putc(const char c) -{ - if (c == '\n') - NS16550_putc(console, '\r'); - - NS16550_putc(console, c); -} - -void -serial_puts (const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - - -int -serial_getc(void) -{ - return NS16550_getc(console); -} - -int -serial_tstc(void) -{ - return NS16550_tstc(console); -} - -void -serial_setbrg (void) -{ - int clock_divisor; - - clock_divisor = calc_divisor(); - NS16550_reinit(console, clock_divisor); -} - -#endif -#endif diff --git a/uart-loader/fs/Makefile b/uart-loader/fs/Makefile deleted file mode 100644 index f419b99..0000000 --- a/uart-loader/fs/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000, 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# - -SUBDIRS := fat - -.depend all: - @for dir in $(SUBDIRS) ; do \ - $(MAKE) -C $$dir $@ ; done diff --git a/uart-loader/fs/fat/Makefile b/uart-loader/fs/fat/Makefile deleted file mode 100644 index e462757..0000000 --- a/uart-loader/fs/fat/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -TOPDIR=../../ - -include $(TOPDIR)/config.mk - -LIB = libfat.a - -AOBJS = -COBJS = fat.o file.o - -OBJS = $(AOBJS) $(COBJS) - -all: $(LIB) $(AOBJS) - -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) - - -######################################################################### - -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-loader/fs/fat/fat.c b/uart-loader/fs/fat/fat.c deleted file mode 100644 index bad4f6c..0000000 --- a/uart-loader/fs/fat/fat.c +++ /dev/null @@ -1,927 +0,0 @@ -/* - * fat.c - * - * R/O (V)FAT 12/16/32 filesystem implementation by Marcus Sundberg - * - * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6 - * 2003-03-10 - kharris@nexus-tech.net - ported to uboot - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#ifdef CFG_CMD_FAT - -/* - * Convert a string to lowercase. - */ -static void -downcase(char *str) -{ - while (*str != '\0') { - TOLOWER(*str); - str++; - } -} - -static block_dev_desc_t *cur_dev = NULL; -static unsigned long part_offset = 0; -static int cur_part = 1; - -#define DOS_PART_TBL_OFFSET 0x1be -#define DOS_PART_MAGIC_OFFSET 0x1fe -#define DOS_FS_TYPE_OFFSET 0x52 - -int strncmp(const char * cs,const char * ct,size_t count) -{ - register signed char __res = 0; - - while (count) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - count--; - } - - return __res; -} - -char * strcpy(char * dest,const char *src) -{ - char *tmp = dest; - - while ((*dest++ = *src++) != '\0') - /* nothing */; - return tmp; -} - -int strcmp(const char * cs,const char * ct) -{ - register signed char __res; - - while (1) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - } - - return __res; -} -void * memcpy(void * dest,const void *src,size_t count) -{ - char *tmp = (char *) dest, *s = (char *) src; - - while (count--) - *tmp++ = *s++; - - return dest; -} - - -int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) -{ - startblock += part_offset; - if (cur_dev == NULL) - return -1; - if (cur_dev->block_read) { - return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr); - } - return -1; -} - - -int -fat_register_device(block_dev_desc_t *dev_desc, int part_no) -{ - unsigned char buffer[SECTOR_SIZE]; - - if (!dev_desc->block_read) - return -1; - cur_dev=dev_desc; - /* check if we have a MBR (on floppies we have only a PBR) */ - if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { - printf ("** Can't read from device %d **\n", dev_desc->dev); - return -1; - } - if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || - buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { - /* no signature found */ - return -1; - } - if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { - /* ok, we assume we are on a PBR only */ - cur_part = 1; - part_offset=0; - } - else { -#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_COMMANDS & CFG_CMD_MMC) || defined(CONFIG_SYSTEMACE) - disk_partition_t info; - if(!get_partition_info(dev_desc, part_no, &info)) { - part_offset = info.start; - cur_part = part_no; - } - else { - printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev); - return -1; - } -#else - /* FIXME we need to determine the start block of the - * partition where the DOS FS resides. This can be done - * by using the get_partition_info routine. For this - * purpose the libpart must be included. - */ - part_offset=63; - //part_offset=0; - cur_part = 1; -#endif - } - return 0; -} - - -/* - * Get the first occurence of a directory delimiter ('/' or '\') in a string. - * Return index into string if found, -1 otherwise. - */ -static int -dirdelim(char *str) -{ - char *start = str; - - while (*str != '\0') { - if (ISDIRDELIM(*str)) return str - start; - str++; - } - return -1; -} - - -/* - * Match volume_info fs_type strings. - * Return 0 on match, -1 otherwise. - */ -static int -compare_sign(char *str1, char *str2) -{ - char *end = str1+SIGNLEN; - - while (str1 != end) { - if (*str1 != *str2) { - return -1; - } - str1++; - str2++; - } - - return 0; -} - - -/* - * Extract zero terminated short name from a directory entry. - */ -static void get_name (dir_entry *dirent, char *s_name) -{ - char *ptr; - - memcpy (s_name, dirent->name, 8); - s_name[8] = '\0'; - ptr = s_name; - while (*ptr && *ptr != ' ') - ptr++; - if (dirent->ext[0] && dirent->ext[0] != ' ') { - *ptr = '.'; - ptr++; - memcpy (ptr, dirent->ext, 3); - ptr[3] = '\0'; - while (*ptr && *ptr != ' ') - ptr++; - } - *ptr = '\0'; - if (*s_name == DELETED_FLAG) - *s_name = '\0'; - else if (*s_name == aRING) - *s_name = 'å'; - downcase (s_name); -} - -/* - * Get the entry at index 'entry' in a FAT (12/16/32) table. - * On failure 0x00 is returned. - */ -static __u32 -get_fatent(fsdata *mydata, __u32 entry) -{ - __u32 bufnum; - __u32 offset; - __u32 ret = 0x00; - - switch (mydata->fatsize) { - case 32: - bufnum = entry / FAT32BUFSIZE; - offset = entry - bufnum * FAT32BUFSIZE; - break; - case 16: - bufnum = entry / FAT16BUFSIZE; - offset = entry - bufnum * FAT16BUFSIZE; - break; - case 12: - bufnum = entry / FAT12BUFSIZE; - offset = entry - bufnum * FAT12BUFSIZE; - break; - - default: - /* Unsupported FAT size */ - return ret; - } - /* Read a new block of FAT entries into the cache. */ - if (bufnum != mydata->fatbufnum) { - int getsize = FATBUFSIZE/FS_BLOCK_SIZE; - __u8 *bufptr = mydata->fatbuf; - __u32 fatlength = mydata->fatlength; - __u32 startblock = bufnum * FATBUFBLOCKS; - unsigned long i; - - fatlength *= SECTOR_SIZE; /* We want it in bytes now */ - startblock += mydata->fat_sect; /* Offset from start of disk */ - - if (getsize > fatlength) getsize = fatlength; - if (disk_read(startblock, getsize, bufptr) < 0) { - FAT_DPRINT("Error reading FAT blocks\n"); - return ret; - } - mydata->fatbufnum = bufnum; - } - - /* Get the actual entry from the table */ - switch (mydata->fatsize) { - case 32: - ret = FAT2CPU32(((__u32*)mydata->fatbuf)[offset]); - break; - case 16: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[offset]); - break; - case 12: { - __u32 off16 = (offset*3)/4; - __u16 val1, val2; - - switch (offset & 0x3) { - case 0: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); - ret &= 0xfff; - break; - case 1: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); - val1 &= 0xf000; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); - val2 &= 0x00ff; - ret = (val2 << 4) | (val1 >> 12); - break; - case 2: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); - val1 &= 0xff00; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); - val2 &= 0x000f; - ret = (val2 << 8) | (val1 >> 8); - break; - case 3: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);; - ret = (ret & 0xfff0) >> 4; - break; - default: - break; - } - } - break; - } - FAT_DPRINT("ret: %d, offset: %d\n", ret, offset); - - return ret; -} - - -/* - * Read at most 'size' bytes from the specified cluster into 'buffer'. - * Return 0 on success, -1 otherwise. - */ -static int -get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) -{ - int idx = 0; - __u32 startsect; - - if (clustnum > 0) { - startsect = mydata->data_begin + clustnum*mydata->clust_size; - } else { - startsect = mydata->rootdir_sect; - } - - if (disk_read(startsect, size/FS_BLOCK_SIZE , buffer) < 0) { - FAT_DPRINT("Error reading data\n"); - return -1; - } - if(size % FS_BLOCK_SIZE) { - __u8 tmpbuf[FS_BLOCK_SIZE]; - idx= size/FS_BLOCK_SIZE; - if (disk_read(startsect + idx, 1, tmpbuf) < 0) { - FAT_DPRINT("Error reading data\n"); - return -1; - } - buffer += idx*FS_BLOCK_SIZE; - - memcpy(buffer, tmpbuf, size % FS_BLOCK_SIZE); - return 0; - } - - return 0; -} - - -/* - * Read at most 'maxsize' bytes from the file associated with 'dentptr' - * into 'buffer'. - * Return the number of bytes read or -1 on fatal errors. - */ -static long -get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, - unsigned long maxsize) -{ - unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0; - unsigned int bytesperclust = mydata->clust_size * SECTOR_SIZE; - __u32 curclust = START(dentptr); - __u32 endclust, newclust; - unsigned long actsize; - - FAT_DPRINT("Filesize: %ld bytes\n", filesize); - - if (maxsize > 0 && filesize > maxsize) filesize = maxsize; - - FAT_DPRINT("Reading: %ld bytes\n", filesize); - - actsize=bytesperclust; - endclust=curclust; - do { - /* search for consecutive clusters */ - while(actsize < filesize) { - newclust = get_fatent(mydata, endclust); - if((newclust -1)!=endclust) - goto getit; - if (newclust <= 0x0001 || newclust >= 0xfff0) { - FAT_DPRINT("curclust: 0x%x\n", newclust); - FAT_DPRINT("Invalid FAT entry\n"); - return gotsize; - } - endclust=newclust; - actsize+= bytesperclust; - } - /* actsize >= file size */ - actsize -= bytesperclust; - /* get remaining clusters */ - if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); - return -1; - } - /* get remaining bytes */ - gotsize += (int)actsize; - filesize -= actsize; - buffer += actsize; - actsize= filesize; - if (get_cluster(mydata, endclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); - return -1; - } - gotsize+=actsize; - return gotsize; -getit: - if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); - return -1; - } - gotsize += (int)actsize; - filesize -= actsize; - buffer += actsize; - curclust = get_fatent(mydata, endclust); - if (curclust <= 0x0001 || curclust >= 0xfff0) { - FAT_DPRINT("curclust: 0x%x\n", curclust); - FAT_ERROR("Invalid FAT entry\n"); - return gotsize; - } - actsize=bytesperclust; - endclust=curclust; - } while (1); -} - - -#ifdef CONFIG_SUPPORT_VFAT -/* - * Extract the file name information from 'slotptr' into 'l_name', - * starting at l_name[*idx]. - * Return 1 if terminator (zero byte) is found, 0 otherwise. - */ -static int -slot2str(dir_slot *slotptr, char *l_name, int *idx) -{ - int j; - - for (j = 0; j <= 8; j += 2) { - l_name[*idx] = slotptr->name0_4[j]; - if (l_name[*idx] == 0x00) return 1; - (*idx)++; - } - for (j = 0; j <= 10; j += 2) { - l_name[*idx] = slotptr->name5_10[j]; - if (l_name[*idx] == 0x00) return 1; - (*idx)++; - } - for (j = 0; j <= 2; j += 2) { - l_name[*idx] = slotptr->name11_12[j]; - if (l_name[*idx] == 0x00) return 1; - (*idx)++; - } - - return 0; -} - -/* Calculate short name checksum */ -static __u8 -mkcksum(const char *str) -{ - int i; - __u8 ret = 0; - - for (i = 0; i < 11; i++) { - ret = (((ret&1)<<7)|((ret&0xfe)>>1)) + str[i]; - } - - return ret; -} -#endif - - -/* - * Get the directory entry associated with 'filename' from the directory - * starting at 'startsect' - */ - - -static dir_entry *get_dentfromdir (fsdata * mydata, int startsect, - char *filename, dir_entry * retdent, - int dols) -{ - -} - -#if 0 -__u8 get_dentfromdir_block[MAX_CLUSTSIZE]; -static dir_entry *get_dentfromdir (fsdata * mydata, int startsect, - char *filename, dir_entry * retdent, - int dols) -{ - __u16 prevcksum = 0xffff; - __u32 curclust = START (retdent); - int files = 0, dirs = 0; - - while (1) { - dir_entry *dentptr; - int i; - - if (get_cluster (mydata, curclust, get_dentfromdir_block, - mydata->clust_size * SECTOR_SIZE) != 0) { - FAT_DPRINT ("Error: reading directory block\n"); - return NULL; - } - dentptr = (dir_entry *) get_dentfromdir_block; - for (i = 0; i < DIRENTSPERCLUST; i++) { - char s_name[14], l_name[256]; - - l_name[0] = '\0'; - if (dentptr->name[0] == DELETED_FLAG) { - dentptr++; - continue; - } - if ((dentptr->attr & ATTR_VOLUME)) { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } - if (dentptr->name[0] == 0) { - if (dols) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - } - FAT_DPRINT ("Dentname == NULL - %d\n", i); - return NULL; - } -#ifdef CONFIG_SUPPORT_VFAT - if (dols && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } -#endif - get_name (dentptr, s_name); - if (dols) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } - } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } - } - dentptr++; - continue; - } - if (strcmp (filename, s_name) && strcmp (filename, l_name)) { - FAT_DPRINT ("Mismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - memcpy (retdent, dentptr, sizeof (dir_entry)); - - FAT_DPRINT ("DentName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), - (dentptr->attr & ATTR_DIR) ? "(DIR)" : ""); - - return retdent; - } - curclust = get_fatent (mydata, curclust); - if (curclust <= 0x0001 || curclust >= 0xfff0) { - FAT_DPRINT ("curclust: 0x%x\n", curclust); - FAT_ERROR ("Invalid FAT entry\n"); - return NULL; - } - } - - return NULL; -} -#endif - - -/* - * Read boot sector and volume info from a FAT filesystem - */ -static int -read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize) -{ - __u8 block[FS_BLOCK_SIZE]; - volume_info *vistart; - - FAT_DPRINT("Reading boot sector\n"); - - if (disk_read(0, 1, block) < 0) { - FAT_DPRINT("Error: reading block\n"); - return -1; - } - - memcpy(bs, block, sizeof(boot_sector)); - bs->reserved = FAT2CPU16(bs->reserved); - bs->fat_length = FAT2CPU16(bs->fat_length); - bs->secs_track = FAT2CPU16(bs->secs_track); - bs->heads = FAT2CPU16(bs->heads); -#if 0 /* UNUSED */ - bs->hidden = FAT2CPU32(bs->hidden); -#endif - bs->total_sect = FAT2CPU32(bs->total_sect); - - /* FAT32 entries */ - if (bs->fat_length == 0) { - /* Assume FAT32 */ - bs->fat32_length = FAT2CPU32(bs->fat32_length); - bs->flags = FAT2CPU16(bs->flags); - bs->root_cluster = FAT2CPU32(bs->root_cluster); - bs->info_sector = FAT2CPU16(bs->info_sector); - bs->backup_boot = FAT2CPU16(bs->backup_boot); - vistart = (volume_info*) (block + sizeof(boot_sector)); - *fatsize = 32; - } else { - vistart = (volume_info*) &(bs->fat32_length); - *fatsize = 0; - } - memcpy(volinfo, vistart, sizeof(volume_info)); - - /* Terminate fs_type string. Writing past the end of vistart - is ok - it's just the buffer. */ - vistart->fs_type[8] = '\0'; - - if (*fatsize == 32) { - if (compare_sign(FAT32_SIGN, vistart->fs_type) == 0) { - return 0; - } - } else { - if (compare_sign(FAT12_SIGN, vistart->fs_type) == 0) { - *fatsize = 12; - return 0; - } - if (compare_sign(FAT16_SIGN, vistart->fs_type) == 0) { - *fatsize = 16; - return 0; - } - } - - FAT_DPRINT("Error: broken fs_type sign\n"); - return -1; -} - -#if 0 -__u8 do_fat_read_block[MAX_CLUSTSIZE]; /* Block buffer */ -#endif - -__u8 *fnamecopy = 0x80500000; -__u8 *do_fat_read_block = 0x80500880; - -boot_sector bs; -volume_info volinfo; -fsdata datablock; - -long -do_fat_read(const char *filename, void *buffer, unsigned long maxsize, - int dols) -{ -#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */ - static -#endif - fsdata *mydata = &datablock; - dir_entry *dentptr; - __u16 prevcksum = 0xffff; - char *subname = ""; - int rootdir_size, cursect; - int idx, isdir = 0; - int files = 0, dirs = 0; - long ret = 0; - int firsttime; - - if (read_bootsectandvi (&bs, &volinfo, &mydata->fatsize)) { - printf ("Error: reading boot sector\n"); - return -1; - } - if (mydata->fatsize == 32) { - mydata->fatlength = bs.fat32_length; - } else { - mydata->fatlength = bs.fat_length; - } - mydata->fat_sect = bs.reserved; - cursect = mydata->rootdir_sect - = mydata->fat_sect + mydata->fatlength * bs.fats; - mydata->clust_size = bs.cluster_size; - if (mydata->fatsize == 32) { - rootdir_size = mydata->clust_size; - mydata->data_begin = mydata->rootdir_sect /* + rootdir_size */ - - (mydata->clust_size * 2); - } else { - rootdir_size = ((bs.dir_entries[1] * (int) 256 + bs.dir_entries[0]) - * sizeof (dir_entry)) / SECTOR_SIZE; - mydata->data_begin = mydata->rootdir_sect + rootdir_size - - (mydata->clust_size * 2); - } - mydata->fatbufnum = -1; - - FAT_DPRINT ("FAT%d, fatlength: %d\n", mydata->fatsize, - mydata->fatlength); - FAT_DPRINT ("Rootdir begins at sector: %d, offset: %x, size: %d\n" - "Data begins at: %d\n", - mydata->rootdir_sect, mydata->rootdir_sect * SECTOR_SIZE, - rootdir_size, mydata->data_begin); - FAT_DPRINT ("Cluster size: %d\n", mydata->clust_size); - - /* "cwd" is always the root... */ - while (ISDIRDELIM (*filename)) - filename++; - /* Make a copy of the filename and convert it to lowercase */ - strcpy (fnamecopy, filename); - downcase (fnamecopy); - if (*fnamecopy == '\0') { - if (!dols){ - printf("\n not there\n"); - return -1; - } - dols = LS_ROOT; - } else if ((idx = dirdelim (fnamecopy)) >= 0) { - isdir = 1; - fnamecopy[idx] = '\0'; - subname = fnamecopy + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*subname)) - subname++; - } else if (dols) { - isdir = 1; - } - - while (1) { - int i; - - if (disk_read (cursect, mydata->clust_size, do_fat_read_block) < 0) { - printf ("Error: reading rootdir block\n"); - return -1; - } - dentptr = (dir_entry *) do_fat_read_block; - for (i = 0; i < DIRENTSPERBLOCK; i++) { - char s_name[14], l_name[256]; - - l_name[0] = '\0'; - if ((dentptr->attr & ATTR_VOLUME)) { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } else if (dentptr->name[0] == 0) { - FAT_DPRINT ("RootDentname == NULL - %d\n", i); - if (dols == LS_ROOT) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - return 0; - } - return -1; - } -#ifdef CONFIG_SUPPORT_VFAT - else if (dols == LS_ROOT - && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } -#endif - get_name (dentptr, s_name); - if (dols == LS_ROOT) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirc = '/'; - if (s_name[0] != 0) { - dirs++; - doit = 1; - } - } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } - } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } - } - dentptr++; - continue; - } - if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) { - FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - if (isdir && !(dentptr->attr & ATTR_DIR)) - return -1; - - FAT_DPRINT ("RootName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), isdir ? "(DIR)" : ""); - - goto rootdir_done; /* We got a match */ - } - cursect++; - } - rootdir_done: - - firsttime = 1; - while (isdir) { - int startsect = mydata->data_begin - + START (dentptr) * mydata->clust_size; - dir_entry dent; - char *nextname = NULL; - - dent = *dentptr; - dentptr = &dent; - idx = dirdelim (subname); - if (idx >= 0) { - subname[idx] = '\0'; - nextname = subname + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*nextname)) - nextname++; - if (dols && *nextname == '\0') - firsttime = 0; - } else { - if (dols && firsttime) { - firsttime = 0; - } else { - isdir = 0; - } - } - - if (get_dentfromdir (mydata, startsect, subname, dentptr, - isdir ? 0 : dols) == NULL) { - if (dols && !isdir) - return 0; - return -1; - } - - if (idx >= 0) { - if (!(dentptr->attr & ATTR_DIR)) - return -1; - subname = nextname; - } - } - ret = get_contents (mydata, dentptr, buffer, maxsize); - FAT_DPRINT ("Size: %d, got: %ld\n", FAT2CPU32 (dentptr->size), ret); - - return ret; -} - - -int -file_fat_detectfs(void) -{ - boot_sector bs; - volume_info volinfo; - int fatsize; - char vol_label[12]; - - if(cur_dev==NULL) { - printf("No current device\n"); - return 1; - } -#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_MMC) - printf("Interface: "); - switch(cur_dev->if_type) { - case IF_TYPE_IDE : printf("IDE"); break; - case IF_TYPE_SCSI : printf("SCSI"); break; - case IF_TYPE_ATAPI : printf("ATAPI"); break; - case IF_TYPE_USB : printf("USB"); break; - case IF_TYPE_DOC : printf("DOC"); break; - case IF_TYPE_MMC : printf("MMC"); break; - default : printf("Unknown"); - } - printf("\n Device %d: ",cur_dev->dev); - dev_print(cur_dev); -#endif - if(read_bootsectandvi(&bs, &volinfo, &fatsize)) { - printf("\nNo valid FAT fs found\n"); - return 1; - } - memcpy (vol_label, volinfo.volume_label, 11); - vol_label[11] = '\0'; - volinfo.fs_type[5]='\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label); - return 0; -} - - -int -file_fat_ls(const char *dir) -{ - return do_fat_read(dir, NULL, 0, LS_YES); -} - - -long -file_fat_read(const char *filename, void *buffer, unsigned long maxsize) -{ - long ret; - ret = do_fat_read(filename, buffer, maxsize, LS_NO); - return ret; -} - -#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */ diff --git a/uart-loader/fs/fat/file.c b/uart-loader/fs/fat/file.c deleted file mode 100644 index 2a2354e..0000000 --- a/uart-loader/fs/fat/file.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * file.c - * - * Mini "VFS" by Marcus Sundberg - * - * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6 - * 2003-03-10 - kharris@nexus-tech.net - ported to uboot - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#if (CONFIG_COMMANDS & CFG_CMD_FAT) - -/* Supported filesystems */ -static const struct filesystem filesystems[] = { - { file_fat_detectfs, file_fat_ls, file_fat_read, "FAT" }, -}; -#define NUM_FILESYS (sizeof(filesystems)/sizeof(struct filesystem)) - -/* The filesystem which was last detected */ -static int current_filesystem = FSTYPE_NONE; - -/* The current working directory */ -#define CWD_LEN 511 -char file_cwd[CWD_LEN+1] = "/"; - -const char * -file_getfsname(int idx) -{ - if (idx < 0 || idx >= NUM_FILESYS) return NULL; - - return filesystems[idx].name; -} - - -static void -pathcpy(char *dest, const char *src) -{ - char *origdest = dest; - - do { - if (dest-file_cwd >= CWD_LEN) { - *dest = '\0'; - return; - } - *(dest) = *(src); - if (*src == '\0') { - if (dest-- != origdest && ISDIRDELIM(*dest)) { - *dest = '\0'; - } - return; - } - ++dest; - if (ISDIRDELIM(*src)) { - while (ISDIRDELIM(*src)) src++; - } else { - src++; - } - } while (1); -} - - -int -file_cd(const char *path) -{ - if (ISDIRDELIM(*path)) { - while (ISDIRDELIM(*path)) path++; - strncpy(file_cwd+1, path, CWD_LEN-1); - } else { - const char *origpath = path; - char *tmpstr = file_cwd; - int back = 0; - - while (*tmpstr != '\0') tmpstr++; - do { - tmpstr--; - } while (ISDIRDELIM(*tmpstr)); - - while (*path == '.') { - path++; - while (*path == '.') { - path++; - back++; - } - if (*path != '\0' && !ISDIRDELIM(*path)) { - path = origpath; - back = 0; - break; - } - while (ISDIRDELIM(*path)) path++; - origpath = path; - } - - while (back--) { - /* Strip off path component */ - while (!ISDIRDELIM(*tmpstr)) { - tmpstr--; - } - if (tmpstr == file_cwd) { - /* Incremented again right after the loop. */ - tmpstr--; - break; - } - /* Skip delimiters */ - while (ISDIRDELIM(*tmpstr)) tmpstr--; - } - tmpstr++; - if (*path == '\0') { - if (tmpstr == file_cwd) { - *tmpstr = '/'; - tmpstr++; - } - *tmpstr = '\0'; - return 0; - } - *tmpstr = '/'; - pathcpy(tmpstr+1, path); - } - - return 0; -} - - -int -file_detectfs(void) -{ - int i; - - current_filesystem = FSTYPE_NONE; - - for (i = 0; i < NUM_FILESYS; i++) { - if (filesystems[i].detect() == 0) { - strcpy(file_cwd, "/"); - current_filesystem = i; - break; - } - } - - return current_filesystem; -} - - -int -file_ls(const char *dir) -{ - char fullpath[1024]; - const char *arg; - - if (current_filesystem == FSTYPE_NONE) { - printf("Can't list files without a filesystem!\n"); - return -1; - } - - if (ISDIRDELIM(*dir)) { - arg = dir; - } else { - sprintf(fullpath, "%s/%s", file_cwd, dir); - arg = fullpath; - } - return filesystems[current_filesystem].ls(arg); -} - - -long -file_read(const char *filename, void *buffer, unsigned long maxsize) -{ - char fullpath[1024]; - const char *arg; - - if (current_filesystem == FSTYPE_NONE) { - printf("Can't load file without a filesystem!\n"); - return -1; - } - - if (ISDIRDELIM(*filename)) { - arg = filename; - } else { - sprintf(fullpath, "%s/%s", file_cwd, filename); - arg = fullpath; - } - - return filesystems[current_filesystem].read(arg, buffer, maxsize); -} - -#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */ diff --git a/uart-loader/include/asm/arch-arm1136/bits.h b/uart-loader/include/asm/arch-arm1136/bits.h deleted file mode 100644 index dc3273e..0000000 --- a/uart-loader/include/asm/arch-arm1136/bits.h +++ /dev/null @@ -1,49 +0,0 @@ -/* bits.h - * Copyright (c) 2004 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -#endif - diff --git a/uart-loader/include/asm/arch-arm1136/clocks.h b/uart-loader/include/asm/arch-arm1136/clocks.h deleted file mode 120000 index c4b03ba..0000000 --- a/uart-loader/include/asm/arch-arm1136/clocks.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/clocks.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-arm1136/clocks242x.h b/uart-loader/include/asm/arch-arm1136/clocks242x.h deleted file mode 120000 index f080726..0000000 --- a/uart-loader/include/asm/arch-arm1136/clocks242x.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/clocks242x.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-arm1136/clocks243x.h b/uart-loader/include/asm/arch-arm1136/clocks243x.h deleted file mode 120000 index 703bdce..0000000 --- a/uart-loader/include/asm/arch-arm1136/clocks243x.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/clocks243x.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-arm1136/mem.h b/uart-loader/include/asm/arch-arm1136/mem.h deleted file mode 120000 index dd453b2..0000000 --- a/uart-loader/include/asm/arch-arm1136/mem.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/mem.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-arm1136/omap2420.h b/uart-loader/include/asm/arch-arm1136/omap2420.h deleted file mode 100644 index 2164b68..0000000 --- a/uart-loader/include/asm/arch-arm1136/omap2420.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2005 Texas Instruments, - * - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2420_SYS_H_ -#define _OMAP2420_SYS_H_ - -#include - - -#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) - -#define __raw_readb(a) (*(volatile unsigned char *)(a)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - - -/* - * 2420 specific Section - */ - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_SYSSTATUS (OMAP2420_GPMC_BASE+0x14) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) - -/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLA_STATUS (OMAP2420_SDRC_BASE+0x64) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_MCFG_1 (OMAP2420_SDRC_BASE+0xB0) -#define SDRC_MR_1 (OMAP2420_SDRC_BASE+0xB4) -#define SDRC_EMR2_1 (OMAP2420_SDRC_BASE+0xBC) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define SDRC_RFR_CTRL1 (OMAP2420_SDRC_BASE+0xD4) -#define SDRC_MANUAL_1 (OMAP2420_SDRC_BASE+0xD8) - -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 - -#define LOADDLL BIT2 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) - -/* - * H4 specific Section - */ - -/* - * The 2420's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x08000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#endif - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -/* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) -#endif /* endif CONFIG_2420H4 */ - -#endif - diff --git a/uart-loader/include/asm/arch-arm1136/omap2430.h b/uart-loader/include/asm/arch-arm1136/omap2430.h deleted file mode 100644 index cf2b0f9..0000000 --- a/uart-loader/include/asm/arch-arm1136/omap2430.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2430_SYS_H_ -#define _OMAP2430_SYS_H_ - -#include - - -#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) - -#define __raw_readb(a) (*(volatile unsigned char *)(a)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - -/* device type */ -#define DEVICE_MASK (BIT8|BIT9|BIT10) -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 - -/* - * 2430 specific Section - */ -#define OMAP243X_CORE_L4_IO_BASE 0x48000000 -#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000 -#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE - - -/* CONTROL */ -#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000) -#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8) - -/* TAP information */ -#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000) -#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204) - -/* - GPMC : In 2430 NOR and NAND can coexist. - During NAND booting , NAND is at CS0 and NOR at CS1 - and Debug FPGA is GPMC_CS5 -*/ -#define OMAP24XX_GPMC_BASE (0x6E000000) - -#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10) -#define GPMC_SYSSTATUS (OMAP24XX_GPMC_BASE+0x14) -#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_5 (OMAP24XX_GPMC_BASE+0x150) -#define GPMC_CONFIG2_5 (OMAP24XX_GPMC_BASE+0x154) -#define GPMC_CONFIG3_5 (OMAP24XX_GPMC_BASE+0x158) -#define GPMC_CONFIG4_5 (OMAP24XX_GPMC_BASE+0x15C) -#define GPMC_CONFIG5_5 (OMAP24XX_GPMC_BASE+0x160) -#define GPMC_CONFIG6_5 (OMAP24XX_GPMC_BASE+0x164) -#define GPMC_CONFIG7_5 (OMAP24XX_GPMC_BASE+0x168) - - -/* SMS */ -#define OMAP24XX_SMS_BASE 0x6C000000 -#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10) - -/* SDRC */ -#define OMAP24XX_SDRC_BASE 0x6D000000 -#define OMAP24XX_SDRC_CS0 0x80000000 -#define OMAP24XX_SDRC_CS1 0xA0000000 -#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14) -#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60) -#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64) -#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0) -#define SDRC_MCFG_1 (OMAP24XX_SDRC_BASE+0xB0) -#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8) -#define SDRC_RFR_CTRL1 (OMAP24XX_SDRC_BASE+0xD4) - -#define LOADDLL BIT2 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2430_UART1 0x4806A000 -#define OMAP2430_UART2 0x4806C000 -#define OMAP2430_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000) -#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) -#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) -#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) -#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) -#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) -#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) -#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) -#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) -#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) -#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) -#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000) -#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000) -#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */ -#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000) - -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000) -#define S32K_CR (SYNC_32KTIMER_BASE+0x10) - -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000) - -#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060) -#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070) -#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078) -#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080) -#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084) -#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244) -#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300) -#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310) -#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340) -#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350) -#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400) -#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410) -#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840) -#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40) - -/* SMX-APE */ -#define SMX_APE_BASE 0x68000000 -#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) -#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) -#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) -#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) - -/* IVA2 */ -#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) - -/* - * The 2430's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP243X) - -/* GPMC */ -/* This is being used by the macros in mem.h. PHYS_FLASH_1 is defined to H4_CS0_BASE */ -# define H4_CS1_BASE 0x09000000 /* flash (64 Meg aligned) */ -#define CFG_FLASH_BASE H4_CS1_BASE -#define DEBUG_BASE 0x08000000 - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -#endif /* endif CONFIG_2430SDP */ - -#endif - diff --git a/uart-loader/include/asm/arch-arm1136/sizes.h b/uart-loader/include/asm/arch-arm1136/sizes.h deleted file mode 100644 index 3dddd8e..0000000 --- a/uart-loader/include/asm/arch-arm1136/sizes.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_32K 0x00008000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_31M 0x01F00000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif /* __sizes_h */ - diff --git a/uart-loader/include/asm/arch-arm1136/sys_info.h b/uart-loader/include/asm/arch-arm1136/sys_info.h deleted file mode 100644 index 94a09cd..0000000 --- a/uart-loader/include/asm/arch-arm1136/sys_info.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright 2005 (C) Texas Instruments, - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_SYS_INFO_H_ -#define _OMAP24XX_SYS_INFO_H_ - -#if 0 -typedef struct h4_system_data { - /* base board info */ - u32 base_b_rev; /* rev from base board i2c */ - /* cpu board info */ - u32 cpu_b_rev; /* rev from cpu board i2c */ - u32 cpu_b_mux; /* mux type on daughter board */ - u32 cpu_b_ddr_type; /* mem type */ - u32 cpu_b_ddr_speed; /* ddr speed rating */ - u32 cpu_b_switches; /* boot ctrl switch settings */ - /* cpu info */ - u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ - u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ -} h4_sys_data; - -#endif - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module*/ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_2420 0x2420 -#define CPU_2422 0x2422 /* 2420 + 64M stacked */ -#define CPU_2423 0x2423 /* 2420 + 96M stacked */ -#define CPU_2430 0x2430 - -/* 242x real hardware: - * ES1 = rev 0 - * ES2 = rev 1 - * ES2.05 = rev 2 - * ES2.1 = rev 3 - * ES2.1.1 = rev 4 - */ - -/* 242x code defines: - * ES1 = 0+1 = 1 - * ES2 = 1+1 = 2 - * ES2.05 = 2+1 = 3 - * ES2.1 = 3+1 = 4 - * Es2.1.1 = 4+1 = 5 - */ -#define CPU_2422_ES1 1 -#define CPU_2422_ES2 2 -#define CPU_2422_ES2_05 3 -#define CPU_2422_ES2_1 4 -#define CPU_2422_ES2_1_1 5 - -#define CPU_2420_ES1 1 -#define CPU_2420_ES2 2 -#define CPU_2420_ES2_05 3 -#define CPU_2420_ES2_1 4 -#define CPU_2420_ES2_1_1 5 - -#define CPU_242X_ES1 1 -#define CPU_242X_ES2 2 -#define CPU_242X_ES2_05 3 -#define CPU_242X_ES2_1 4 -#define CPU_242X_ES2_1_1 5 - -#define CPU_2420_2422_ES1 1 -#define CPU_2420_2422_ES2_1 4 - -/* 243x real hardware: - * ES1 = rev 0 - * ES2 = rev 1 - * - * 243x code defines: - * ES1 = 0+1 = 1 - * ES2 = 1+1 = 2 - */ -#define CPU_2430_ES1 1 -#define CPU_2430_ES2 2 - -#ifdef VPOM2430 -# define CPU_2430_VIRTIO 3 -#else -# define CPU_2430_VIRTIO 1 -#endif -#define CPU_2430_ZEBU 0xD - -#define CPU_2420_CHIPID 0x0B5D9000 -#define CPU_2430_CHIPID 0x0B68A000 -#define CPU_24XX_ID_MASK 0x0FFFF000 -#define CPU_242X_REV_MASK 0xF0000000 -#define CPU_242X_PID_MASK 0x000F0000 - -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 -#define BOARD_H4_MENELAUS_HRP 3 -#define BOARD_SDP_2430 4 - -#define GPMC_MUXED 1 -#define GPMC_NONMUXED 0 - -#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ -#define TYPE_NOR 0x000 -#define TYPE_ONENAND 0x800 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ - -#endif diff --git a/uart-loader/include/asm/arch-arm926ejs/sizes.h b/uart-loader/include/asm/arch-arm926ejs/sizes.h deleted file mode 100644 index ef0b99b..0000000 --- a/uart-loader/include/asm/arch-arm926ejs/sizes.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA0 2111-1307 - * USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif /* __sizes_h */ diff --git a/uart-loader/include/asm/arch-omap3/bits.h b/uart-loader/include/asm/arch-omap3/bits.h deleted file mode 120000 index 036fe66..0000000 --- a/uart-loader/include/asm/arch-omap3/bits.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/bits.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/clocks.h b/uart-loader/include/asm/arch-omap3/clocks.h deleted file mode 120000 index 894fadf..0000000 --- a/uart-loader/include/asm/arch-omap3/clocks.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/clocks.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/clocks343x.h b/uart-loader/include/asm/arch-omap3/clocks343x.h deleted file mode 120000 index 92f7376..0000000 --- a/uart-loader/include/asm/arch-omap3/clocks343x.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/clocks343x.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/cpu.h b/uart-loader/include/asm/arch-omap3/cpu.h deleted file mode 120000 index 5c88731..0000000 --- a/uart-loader/include/asm/arch-omap3/cpu.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/cpu.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/dpll_table_34xx.S b/uart-loader/include/asm/arch-omap3/dpll_table_34xx.S deleted file mode 120000 index 803f515..0000000 --- a/uart-loader/include/asm/arch-omap3/dpll_table_34xx.S +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_34xx.S \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/dpll_table_36xx.S b/uart-loader/include/asm/arch-omap3/dpll_table_36xx.S deleted file mode 120000 index e8f2f9b..0000000 --- a/uart-loader/include/asm/arch-omap3/dpll_table_36xx.S +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_36xx.S \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/mem.h b/uart-loader/include/asm/arch-omap3/mem.h deleted file mode 120000 index b49b783..0000000 --- a/uart-loader/include/asm/arch-omap3/mem.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/mem.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/mmc.h b/uart-loader/include/asm/arch-omap3/mmc.h deleted file mode 100644 index 7bceb5f..0000000 --- a/uart-loader/include/asm/arch-omap3/mmc.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * linux/drivers/mmc/mmc_pxa.h - * - * Author: Vladimir Shebordaev, Igor Oblakov - * Copyright: MontaVista Software Inc. - * - * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __MMC_PXA_P_H__ -#define __MMC_PXA_P_H__ - -/* PXA-250 MMC controller registers */ - -/* MMC_STRPCL */ -#define MMC_STRPCL_STOP_CLK (0x0001UL) -#define MMC_STRPCL_START_CLK (0x0002UL) - -/* MMC_STAT */ - -#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN\ - | MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE \ - | MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR) - -/* MMC_CLKRT */ -#define MMC_CLKRT_20MHZ (0x0000UL) -#define MMC_CLKRT_10MHZ (0x0001UL) -#define MMC_CLKRT_5MHZ (0x0002UL) -#define MMC_CLKRT_2_5MHZ (0x0003UL) -#define MMC_CLKRT_1_25MHZ (0x0004UL) -#define MMC_CLKRT_0_625MHZ (0x0005UL) -#define MMC_CLKRT_0_3125MHZ (0x0006UL) - -/* MMC_SPI */ -#define MMC_SPI_DISABLE (0x00UL) -#define MMC_SPI_EN (0x01UL) -#define MMC_SPI_CS_EN (0x01UL << 2) -#define MMC_SPI_CS_ADDRESS (0x01UL << 3) -#define MMC_SPI_CRC_ON (0x01UL << 1) - -/* MMC_CMDAT */ -#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7) -#define MMC_CMDAT_INIT (0x0001UL << 6) -#define MMC_CMDAT_BUSY (0x0001UL << 5) -#define MMC_CMDAT_STREAM (0x0001UL << 4) -#define MMC_CMDAT_BLOCK (0x0000UL << 4) -#define MMC_CMDAT_WRITE (0x0001UL << 3) -#define MMC_CMDAT_READ (0x0000UL << 3) -#define MMC_CMDAT_DATA_EN (0x0001UL << 2) -#define MMC_CMDAT_R1 (0x0001UL) -#define MMC_CMDAT_R2 (0x0002UL) -#define MMC_CMDAT_R3 (0x0003UL) - -/* MMC_RESTO */ -#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */ - -/* MMC_RDTO */ -#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */ - -/* MMC_BLKLEN */ -#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */ - -/* MMC_PRTBUF */ -#define MMC_PRTBUF_BUF_PART_FULL (0x01UL) -#define MMC_PRTBUF_BUF_FULL (0x00UL) - -/* MMC_I_MASK */ -#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6) -#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5) -#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4) -#define MMC_I_MASK_STOP_CMD (0x01UL << 3) -#define MMC_I_MASK_END_CMD_RES (0x01UL << 2) -#define MMC_I_MASK_PRG_DONE (0x01UL << 1) -#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL) -#define MMC_I_MASK_ALL (0x07fUL) - - -/* MMC_I_REG */ -#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6) -#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5) -#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4) -#define MMC_I_REG_STOP_CMD (0x01UL << 3) -#define MMC_I_REG_END_CMD_RES (0x01UL << 2) -#define MMC_I_REG_PRG_DONE (0x01UL << 1) -#define MMC_I_REG_DATA_TRAN_DONE (0x01UL) -#define MMC_I_REG_ALL (0x007fUL) - -/* MMC_CMD */ -#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */ -#define CMD(x) (x) - -#define MMC_DEFAULT_RCA 1 - -#define MMC_BLOCK_SIZE 512 -#define MMC_CMD_RESET 0 -#define MMC_CMD_SEND_OP_COND 1 -#define MMC_CMD_ALL_SEND_CID 2 -#define MMC_CMD_SET_RCA 3 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_SEND_CID 10 -#define MMC_CMD_SEND_STATUS 13 -#define MMC_CMD_SET_BLOCKLEN 16 -#define MMC_CMD_READ_BLOCK 17 -#define MMC_CMD_RD_BLK_MULTI 18 -#define MMC_CMD_WRITE_BLOCK 24 - -#define MMC_MAX_BLOCK_SIZE 512 - -#define MMC_R1_IDLE_STATE 0x01 -#define MMC_R1_ERASE_STATE 0x02 -#define MMC_R1_ILLEGAL_CMD 0x04 -#define MMC_R1_COM_CRC_ERR 0x08 -#define MMC_R1_ERASE_SEQ_ERR 0x01 -#define MMC_R1_ADDR_ERR 0x02 -#define MMC_R1_PARAM_ERR 0x04 - -#define MMC_R1B_WP_ERASE_SKIP 0x0002 -#define MMC_R1B_ERR 0x0004 -#define MMC_R1B_CC_ERR 0x0008 -#define MMC_R1B_CARD_ECC_ERR 0x0010 -#define MMC_R1B_WP_VIOLATION 0x0020 -#define MMC_R1B_ERASE_PARAM 0x0040 -#define MMC_R1B_OOR 0x0080 -#define MMC_R1B_IDLE_STATE 0x0100 -#define MMC_R1B_ERASE_RESET 0x0200 -#define MMC_R1B_ILLEGAL_CMD 0x0400 -#define MMC_R1B_COM_CRC_ERR 0x0800 -#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -#define MMC_R1B_ADDR_ERR 0x2000 -#define MMC_R1B_PARAM_ERR 0x4000 - -typedef struct mmc_cid { -/* FIXME: BYTE_ORDER */ - unsigned char year:4, - month:4; - unsigned char sn[3]; - unsigned char fwrev:4, - hwrev:4; - unsigned char name[6]; - unsigned char id[3]; -} mmc_cid_t; - -typedef struct mmc_csd -{ - unsigned char ecc:2, - file_format:2, - tmp_write_protect:1, - perm_write_protect:1, - copy:1, - file_format_grp:1; - unsigned long int content_prot_app:1, - rsvd3:4, - write_bl_partial:1, - write_bl_len:4, - r2w_factor:3, - default_ecc:2, - wp_grp_enable:1, - wp_grp_size:5, - erase_grp_mult:5, - erase_grp_size:5, - c_size_mult1:3, - vdd_w_curr_max:3, - vdd_w_curr_min:3, - vdd_r_curr_max:3, - vdd_r_curr_min:3, - c_size:12, - rsvd2:2, - dsr_imp:1, - read_blk_misalign:1, - write_blk_misalign:1, - read_bl_partial:1; - - unsigned short read_bl_len:4, - ccc:12; - unsigned char tran_speed; - unsigned char nsac; - unsigned char taac; - unsigned char rsvd1:2, - spec_vers:4, - csd_structure:2; -} mmc_csd_t; - - -#endif /* __MMC_PXA_P_H__ */ diff --git a/uart-loader/include/asm/arch-omap3/mux.h b/uart-loader/include/asm/arch-omap3/mux.h deleted file mode 120000 index a745fbd..0000000 --- a/uart-loader/include/asm/arch-omap3/mux.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/mux.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/omap3430.h b/uart-loader/include/asm/arch-omap3/omap3430.h deleted file mode 120000 index 69502f2..0000000 --- a/uart-loader/include/asm/arch-omap3/omap3430.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/omap3430.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/rev.h b/uart-loader/include/asm/arch-omap3/rev.h deleted file mode 120000 index 66918c9..0000000 --- a/uart-loader/include/asm/arch-omap3/rev.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/rev.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/sizes.h b/uart-loader/include/asm/arch-omap3/sizes.h deleted file mode 120000 index 4eda715..0000000 --- a/uart-loader/include/asm/arch-omap3/sizes.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/sizes.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/sys_info.h b/uart-loader/include/asm/arch-omap3/sys_info.h deleted file mode 120000 index 2e4d1d0..0000000 --- a/uart-loader/include/asm/arch-omap3/sys_info.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/sys_info.h \ No newline at end of file diff --git a/uart-loader/include/asm/arch-omap3/sys_proto.h b/uart-loader/include/asm/arch-omap3/sys_proto.h deleted file mode 120000 index 3a032c8..0000000 --- a/uart-loader/include/asm/arch-omap3/sys_proto.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/sys_proto.h \ No newline at end of file diff --git a/uart-loader/include/asm/atomic.h b/uart-loader/include/asm/atomic.h deleted file mode 100644 index ba9e4b7..0000000 --- a/uart-loader/include/asm/atomic.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/include/asm-arm/atomic.h - * - * Copyright (c) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - * 13-04-1997 RMK Made functions atomic! - * 07-12-1997 RMK Upgraded for v2.1. - * 26-08-1998 PJB Added #ifdef __KERNEL__ - */ -#ifndef __ASM_ARM_ATOMIC_H -#define __ASM_ARM_ATOMIC_H - -#include - -#ifdef CONFIG_SMP -#error SMP not supported -#endif - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ -#include - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) - -static inline void atomic_add(int i, volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter += i; - local_irq_restore(flags); -} - -static inline void atomic_sub(int i, volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter -= i; - local_irq_restore(flags); -} - -static inline void atomic_inc(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter += 1; - local_irq_restore(flags); -} - -static inline void atomic_dec(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter -= 1; - local_irq_restore(flags); -} - -static inline int atomic_dec_and_test(volatile atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val -= 1; - local_irq_restore(flags); - - return val == 0; -} - -static inline int atomic_add_negative(int i, volatile atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val += i; - local_irq_restore(flags); - - return val < 0; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - local_irq_save(flags); - *addr &= ~mask; - local_irq_restore(flags); -} - -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#endif -#endif diff --git a/uart-loader/include/asm/byteorder.h b/uart-loader/include/asm/byteorder.h deleted file mode 120000 index be6afe8..0000000 --- a/uart-loader/include/asm/byteorder.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/asm-arm/byteorder.h \ No newline at end of file diff --git a/uart-loader/include/asm/posix_types.h b/uart-loader/include/asm/posix_types.h deleted file mode 100644 index c412486..0000000 --- a/uart-loader/include/asm/posix_types.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * linux/include/asm-arm/posix_types.h - * - * Copyright (C) 1996-1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - */ -#ifndef __ARCH_ARM_POSIX_TYPES_H -#define __ARCH_ARM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_dev_t; -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -#define __FD_SET(fd, fdsetp) \ - (((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31))) - -#undef __FD_CLR -#define __FD_CLR(fd, fdsetp) \ - (((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31))) - -#undef __FD_ISSET -#define __FD_ISSET(fd, fdsetp) \ - ((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) \ - (memset (fdsetp, 0, sizeof (*(fd_set *)fdsetp))) - -#endif - -#endif diff --git a/uart-loader/include/asm/setup.h b/uart-loader/include/asm/setup.h deleted file mode 100644 index 89df4dc..0000000 --- a/uart-loader/include/asm/setup.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * linux/include/asm/setup.h - * - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Structure passed to kernel to tell it about the - * hardware it's running on. See linux/Documentation/arm/Setup - * for more info. - * - * NOTE: - * This file contains two ways to pass information from the boot - * loader to the kernel. The old struct param_struct is deprecated, - * but it will be kept in the kernel for 5 years from now - * (2001). This will allow boot loaders to convert to the new struct - * tag way. - */ -#ifndef __ASMARM_SETUP_H -#define __ASMARM_SETUP_H - -/* - * Usage: - * - do not go blindly adding fields, add them at the end - * - when adding fields, don't rely on the address until - * a patch from me has been released - * - unused fields should be zero (for future expansion) - * - this structure is relatively short-lived - only - * guaranteed to contain useful data in setup_arch() - */ -#define COMMAND_LINE_SIZE 1024 - -/* This is the old deprecated way to pass parameters to the kernel */ -struct param_struct { - union { - struct { - unsigned long page_size; /* 0 */ - unsigned long nr_pages; /* 4 */ - unsigned long ramdisk_size; /* 8 */ - unsigned long flags; /* 12 */ -#define FLAG_READONLY 1 -#define FLAG_RDLOAD 4 -#define FLAG_RDPROMPT 8 - unsigned long rootdev; /* 16 */ - unsigned long video_num_cols; /* 20 */ - unsigned long video_num_rows; /* 24 */ - unsigned long video_x; /* 28 */ - unsigned long video_y; /* 32 */ - unsigned long memc_control_reg; /* 36 */ - unsigned char sounddefault; /* 40 */ - unsigned char adfsdrives; /* 41 */ - unsigned char bytes_per_char_h; /* 42 */ - unsigned char bytes_per_char_v; /* 43 */ - unsigned long pages_in_bank[4]; /* 44 */ - unsigned long pages_in_vram; /* 60 */ - unsigned long initrd_start; /* 64 */ - unsigned long initrd_size; /* 68 */ - unsigned long rd_start; /* 72 */ - unsigned long system_rev; /* 76 */ - unsigned long system_serial_low; /* 80 */ - unsigned long system_serial_high; /* 84 */ - unsigned long mem_fclk_21285; /* 88 */ - } s; - char unused[256]; - } u1; - union { - char paths[8][128]; - struct { - unsigned long magic; - char n[1024 - sizeof(unsigned long)]; - } s; - } u2; - char commandline[COMMAND_LINE_SIZE]; -}; - - -/* - * The new way of passing information: a list of tagged entries - */ - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - u32 size; - u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - u32 flags; /* bit 0 = read-only */ - u32 pagesize; - u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - u32 size; - u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - u8 x; - u8 y; - u16 video_page; - u8 video_mode; - u8 video_cols; - u16 video_ega_bx; - u8 video_lines; - u8 video_isvga; - u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - u32 flags; /* bit 0 = load, bit 1 = prompt */ - u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* describes where the compressed ramdisk image lives (virtual address) */ -/* - * this one accidentally used virtual addresses - as such, - * its depreciated. - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - u32 start; /* physical start address */ - u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - u32 low; - u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - u16 lfb_width; - u16 lfb_height; - u16 lfb_depth; - u16 lfb_linelength; - u32 lfb_base; - u32 lfb_size; - u8 red_size; - u8 red_pos; - u8 green_size; - u8 green_pos; - u8 blue_size; - u8 blue_pos; - u8 rsvd_size; - u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* acorn RiscPC specific information */ -#define ATAG_ACORN 0x41000101 - -struct tag_acorn { - u32 memc_control_reg; - u32 vram_pages; - u8 sounddefault; - u8 adfsdrives; -}; - -/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ -#define ATAG_MEMCLK 0x41000402 - -struct tag_memclk { - u32 fmemclk; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - - /* - * Acorn specific - */ - struct tag_acorn acorn; - - /* - * DC21285 specific - */ - struct tag_memclk memclk; - } u; -}; - -struct tagtable { - u32 tag; - int (*parse)(const struct tag *); -}; - -#define __tag __attribute__((unused, __section__(".taglist"))) -#define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -/* - * Memory map description - */ -#define NR_BANKS 8 - -struct meminfo { - int nr_banks; - unsigned long end; - struct { - unsigned long start; - unsigned long size; - int node; - } bank[NR_BANKS]; -}; - -extern struct meminfo meminfo; - -#endif diff --git a/uart-loader/include/asm/sizes.h b/uart-loader/include/asm/sizes.h deleted file mode 100644 index f8d92ca..0000000 --- a/uart-loader/include/asm/sizes.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ diff --git a/uart-loader/include/asm/string.h b/uart-loader/include/asm/string.h deleted file mode 100644 index c3ea582..0000000 --- a/uart-loader/include/asm/string.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_ARM_STRING_H -#define __ASM_ARM_STRING_H - -/* - * We don't do inline string functions, since the - * optimised inline asm versions are not small. - */ - -#undef __HAVE_ARCH_STRRCHR -extern char * strrchr(const char * s, int c); - -#undef __HAVE_ARCH_STRCHR -extern char * strchr(const char * s, int c); - -#undef __HAVE_ARCH_MEMCPY -extern void * memcpy(void *, const void *, __kernel_size_t); - -#undef __HAVE_ARCH_MEMMOVE -extern void * memmove(void *, const void *, __kernel_size_t); - -#undef __HAVE_ARCH_MEMCHR -extern void * memchr(const void *, int, __kernel_size_t); - -#undef __HAVE_ARCH_MEMZERO -#undef __HAVE_ARCH_MEMSET -extern void * memset(void *, int, __kernel_size_t); - -#if 0 -extern void __memzero(void *ptr, __kernel_size_t n); - -#define memset(p,v,n) \ - ({ \ - if ((n) != 0) { \ - if (__builtin_constant_p((v)) && (v) == 0) \ - __memzero((p),(n)); \ - else \ - memset((p),(v),(n)); \ - } \ - (p); \ - }) - -#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); }) -#else -extern void memzero(void *ptr, __kernel_size_t n); -#endif - -#endif diff --git a/uart-loader/include/asm/types.h b/uart-loader/include/asm/types.h deleted file mode 100644 index 13e9806..0000000 --- a/uart-loader/include/asm/types.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -typedef unsigned short umode_t; - -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __signed__ long long __s64; -typedef unsigned long long __u64; -#endif - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - -#define BITS_PER_LONG 32 - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#endif /* __KERNEL__ */ - -#endif diff --git a/uart-loader/include/asm/x-load-arm.h b/uart-loader/include/asm/x-load-arm.h deleted file mode 100644 index eef268e..0000000 --- a/uart-loader/include/asm/x-load-arm.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _X_LOAD_ARM_H_ -#define _X_LOAD_ARM_H_ 1 - -/* for the following variables, see start.S */ -extern ulong _armboot_start; /* code start */ -extern ulong _bss_start; /* code + data end == BSS start */ -extern ulong _bss_end; /* BSS end */ - -#endif /* _X_LOAD_ARM_H_ */ diff --git a/uart-loader/include/command.h b/uart-loader/include/command.h deleted file mode 120000 index f4bd05e..0000000 --- a/uart-loader/include/command.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/command.h \ No newline at end of file diff --git a/uart-loader/include/common.h b/uart-loader/include/common.h deleted file mode 100644 index fe8bc90..0000000 --- a/uart-loader/include/common.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __COMMON_H_ -#define __COMMON_H_ 1 - -#undef _LINUX_CONFIG_H -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - -typedef unsigned char uchar; -typedef volatile unsigned long vu_long; -typedef volatile unsigned short vu_short; -typedef volatile unsigned char vu_char; - -#include -#include -#include - -#ifdef CONFIG_ARM -#define asmlinkage /* nothing */ -#endif - - -#ifdef CONFIG_ARM -# include -# include /* ARM version to be fixed! */ -#endif /* CONFIG_ARM */ - -#ifdef CFG_PRINTF -#define printf(fmt,args...) serial_printf (fmt ,##args) -#define getc() serial_getc() -#else -#define printf(fmt,args...) -#define getc() ' ' -#endif /* CFG_PRINTF */ - -/* board/$(BOARD)/$(BOARD).c */ -int board_init (void); -int nand_init (void); -int mmc_boot (void); -void board_hang (void); - -/* cpu/$(CPU)/cpu.c */ -int cpu_init (void); -#ifdef CFG_UDELAY -void udelay (unsigned long usec); -#endif - -/* nand driver */ -#define NAND_CMD_READ0 0 -#define NAND_CMD_READ1 1 -#define NAND_CMD_READOOB 0x50 -#define NAND_CMD_STATUS 0x70 -#define NAND_CMD_READID 0x90 -#define NAND_CMD_RESET 0xff - -/* Extended Commands for Large page devices */ -#define NAND_CMD_READSTART 0x30 - -int nand_chip(void); -int nand_read_block(uchar *buf, ulong block_addr); - -int onenand_chip(void); -int onenand_read_block(unsigned char *buf, ulong block); - - -#ifdef CFG_PRINTF - -/* serial driver */ -int serial_init (void); -void serial_setbrg (void); -void serial_putc (const char); -void serial_puts (const char *); -int serial_getc (void); -int serial_tstc (void); - -/* lib/printf.c */ -void serial_printf (const char *fmt, ...); -#endif - -/* lib/crc.c */ -void nand_calculate_ecc (const u_char *dat, u_char *ecc_code); -int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc); - -/* lib/board.c */ -void hang (void) __attribute__ ((noreturn)); -#endif /* __COMMON_H_ */ diff --git a/uart-loader/include/configs/omap3430labrador.h b/uart-loader/include/configs/omap3430labrador.h deleted file mode 100644 index 53b72f1..0000000 --- a/uart-loader/include/configs/omap3430labrador.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * (C) Copyright 2006 - * Texas Instruments - * Richard Woodruff - * - * X-Loader Configuation settings for the TI OMAP SDP3430 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* configure for GTA04 with DM3730 */ -#define CONFIG_OMAP36XX 1 /* or 36XX (DM3730) */ -#define PRCM_CLK_CFG2_400MHZ 1 - -/* serial printf facility takes about 3.5K */ -#define CFG_PRINTF -//#undef CFG_PRINTF - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_3430LABRADOR 1 /* working on Labrador */ -//#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */ - -#include /* get chip and board defs */ - -/* uncomment it if you need timer based udelay(). it takes about 250 bytes */ -//#define CFG_UDELAY - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -//#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */ -#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */ -#define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */ - -/* Memory type */ -#define CFG_3430SDRAM_DDR 1 - -/* The actual register values are defined in u-boot- mem.h */ -/* SDRAM Bank Allocation method */ -//#define SDRC_B_R_C 1 -//#define SDRC_B1_R_B0_C 1 -#define SDRC_R_B_C 1 - -/* Boot type */ -#define CFG_NAND 1 -//#define CFG_ONENAND 1 - -# define NAND_BASE_ADR NAND_BASE /* NAND flash */ -# define ONENAND_BASE ONENAND_MAP /* OneNand flash */ - -/* To use the 256/512 byte s/w ecc define CFG_SW_ECC_(256/512) */ -/* Use the 512 byte hw ecc in rom code layout */ -#define NAND_HW_ROMCODE_ECC_LAYOUT - -#ifdef CFG_NAND -#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M /* u = ofdon't need so much for nand port */ -#define OMAP34XX_GPMC_CS0_MAP NAND_BASE_ADR -#else -#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M -#define OMAP34XX_GPMC_CS0_MAP ONENAND_BASE -#define ONENAND_ADDR ONENAND_BASE /* physical address of OneNAND at CS0*/ -#endif - - -#ifdef CFG_PRINTF - -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (48000000) -#define CFG_NS16550_COM3 OMAP34XX_UART3 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL3 3 /* UART3 on board */ -#define CONFIG_CONS_INDEX 3 - -#define CONFIG_BAUDRATE 115200 -#define CFG_PBSIZE 256 - -#endif /* CFG_PRINTF */ - -/* - * Miscellaneous configurable options - */ -#define CFG_LOADADDR 0x80008000 - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -#ifdef CFG_NAND - -/*----------------------------------------------------------------------- - * Board NAND Info. - */ - - -#define CFG_NAND_K9F1G08R0A /* Micron 16-bit 256MB chip large page NAND chip*/ -#define NAND_16BIT - -/* NAND is partitioned: - * 0x00000000 - 0x0007FFFF Booting Image - * 0x00080000 - 0x000BFFFF U-Boot Image - * 0x000C0000 - 0x000FFFFF U-Boot Env Data (X-loader doesn't care) - * 0x00100000 - 0x002FFFFF Kernel Image - * 0x00300000 - 0x08000000 depends on application - */ -#define NAND_UBOOT_START 0x0080000 /* Leaving first 4 blocks for x-load */ -#define NAND_UBOOT_END 0x00C0000 /* Giving a space of 2 blocks = 256KB */ -#define NAND_BLOCK_SIZE 0x20000 - -#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50) -#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE+0x7C) -#define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE+0x80) -#define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE+0x84) - -#ifdef NAND_16BIT -#define WRITE_NAND_COMMAND(d, adr) \ - do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d;} while(0) -#define WRITE_NAND_ADDRESS(d, adr) \ - do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d;} while(0) -#define WRITE_NAND(d, adr) \ - do {*(volatile u16 *)GPMC_NAND_DATA_0 = d;} while(0) -#define READ_NAND(adr) \ - (*(volatile u16 *)GPMC_NAND_DATA_0) -#define NAND_WAIT_READY() -#define NAND_WP_OFF() \ - do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) -#define NAND_WP_ON() \ - do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) - -#else /* to support 8-bit NAND devices */ -#define WRITE_NAND_COMMAND(d, adr) \ - do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d;} while(0) -#define WRITE_NAND_ADDRESS(d, adr) \ - do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d;} while(0) -#define WRITE_NAND(d, adr) \ - do {*(volatile u8 *)GPMC_NAND_DATA_0 = d;} while(0) -#define READ_NAND(adr) \ - (*(volatile u8 *)GPMC_NAND_DATA_0); -#define NAND_WAIT_READY() -#define NAND_WP_OFF() \ - do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) -#define NAND_WP_ON() \ - do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) - -#endif - -#define NAND_CTL_CLRALE(adr) -#define NAND_CTL_SETALE(adr) -#define NAND_CTL_CLRCLE(adr) -#define NAND_CTL_SETCLE(adr) -#define NAND_DISABLE_CE() -#define NAND_ENABLE_CE() - -#else -/*----------------------------------------------------------------------- - * Board oneNAND Info. - */ -#define CFG_SYNC_BURST_READ 1 - -/* OneNAND is partitioned: - * 0x0000000 - 0x0080000 X-Loader - * 0x0080000 - 0x00c0000 U-boot Image - * 0x00c0000 - 0x00e0000 U-Boot Env Data (X-loader doesn't care) - * 0x00e0000 - 0x0120000 Kernel Image - * 0x0120000 - 0x4000000 depends on application - */ - -#define ONENAND_START_BLOCK 4 -#define ONENAND_END_BLOCK 6 -#define ONENAND_PAGE_SIZE 2048 /* 2KB */ -#define ONENAND_BLOCK_SIZE 0x20000 /* 128KB */ - -#endif /* oneNAND */ - -/* Enable CONFIG_MMC macro if MMC boot support is required */ -/* if loadb and MMC support are enabled together, the size of x-loader - (code + data) becomes greater than 32K - the size of SRAM. So don't enable - them together. - */ -#if !defined(START_LOADB_DOWNLOAD) -#define CONFIG_MMC 1 -#endif -#if defined(CONFIG_MMC) - #define CFG_CMD_MMC 1 - #define CFG_CMD_FAT 1 -#endif - -#endif /* __CONFIG_H */ - diff --git a/uart-loader/include/fat.h b/uart-loader/include/fat.h deleted file mode 120000 index aeeb5a0..0000000 --- a/uart-loader/include/fat.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/fat.h \ No newline at end of file diff --git a/uart-loader/include/ide.h b/uart-loader/include/ide.h deleted file mode 120000 index 9c84a17..0000000 --- a/uart-loader/include/ide.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/ide.h \ No newline at end of file diff --git a/uart-loader/include/linux/byteorder b/uart-loader/include/linux/byteorder deleted file mode 120000 index f000c3b..0000000 --- a/uart-loader/include/linux/byteorder +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/linux/byteorder \ No newline at end of file diff --git a/uart-loader/include/linux/config.h b/uart-loader/include/linux/config.h deleted file mode 100644 index a0194cb..0000000 --- a/uart-loader/include/linux/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _LINUX_CONFIG_H -#define _LINUX_CONFIG_H - -/* #include */ - -#endif diff --git a/uart-loader/include/linux/posix_types.h b/uart-loader/include/linux/posix_types.h deleted file mode 100644 index bd37e1f..0000000 --- a/uart-loader/include/linux/posix_types.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _LINUX_POSIX_TYPES_H -#define _LINUX_POSIX_TYPES_H - -#include - -/* - * This allows for 1024 file descriptors: if NR_OPEN is ever grown - * beyond that you'll have to change this too. But 1024 fd's seem to be - * enough even for such "real" unices like OSF/1, so hopefully this is - * one limit that doesn't have to be changed [again]. - * - * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in - * (and thus ) - but this is a more logical - * place for them. Solved by having dummy defines in . - */ - -/* - * Those macros may have been defined in . But we always - * use the ones here. - */ -#undef __NFDBITS -#define __NFDBITS (8 * sizeof(unsigned long)) - -#undef __FD_SETSIZE -#define __FD_SETSIZE 1024 - -#undef __FDSET_LONGS -#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS) - -#undef __FDELT -#define __FDELT(d) ((d) / __NFDBITS) - -#undef __FDMASK -#define __FDMASK(d) (1UL << ((d) % __NFDBITS)) - -typedef struct { - unsigned long fds_bits [__FDSET_LONGS]; -} __kernel_fd_set; - -/* Type of a signal handler. */ -typedef void (*__kernel_sighandler_t)(int); - -/* Type of a SYSV IPC key. */ -typedef int __kernel_key_t; - -#include - -#endif /* _LINUX_POSIX_TYPES_H */ diff --git a/uart-loader/include/linux/stat.h b/uart-loader/include/linux/stat.h deleted file mode 120000 index 3bc0369..0000000 --- a/uart-loader/include/linux/stat.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/linux/stat.h \ No newline at end of file diff --git a/uart-loader/include/linux/stddef.h b/uart-loader/include/linux/stddef.h deleted file mode 100644 index 81e34c2..0000000 --- a/uart-loader/include/linux/stddef.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _LINUX_STDDEF_H -#define _LINUX_STDDEF_H - -#undef NULL -#if defined(__cplusplus) -#define NULL 0 -#else -#define NULL ((void *)0) -#endif - -#ifndef _SIZE_T -#include -#endif - -#undef offsetof -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - -#endif diff --git a/uart-loader/include/linux/time.h b/uart-loader/include/linux/time.h deleted file mode 120000 index d630a65..0000000 --- a/uart-loader/include/linux/time.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/linux/time.h \ No newline at end of file diff --git a/uart-loader/include/linux/types.h b/uart-loader/include/linux/types.h deleted file mode 100644 index df4808f..0000000 --- a/uart-loader/include/linux/types.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef _LINUX_TYPES_H -#define _LINUX_TYPES_H - -#ifdef __KERNEL__ -#include -#endif - -#include -#include - -#ifndef __KERNEL_STRICT_NAMES - -typedef __kernel_fd_set fd_set; -typedef __kernel_dev_t dev_t; -typedef __kernel_ino_t ino_t; -typedef __kernel_mode_t mode_t; -typedef __kernel_nlink_t nlink_t; -typedef __kernel_off_t off_t; -typedef __kernel_pid_t pid_t; -typedef __kernel_daddr_t daddr_t; -typedef __kernel_key_t key_t; -typedef __kernel_suseconds_t suseconds_t; - -#ifdef __KERNEL__ -typedef __kernel_uid32_t uid_t; -typedef __kernel_gid32_t gid_t; -typedef __kernel_uid16_t uid16_t; -typedef __kernel_gid16_t gid16_t; - -#ifdef CONFIG_UID16 -/* This is defined by include/asm-{arch}/posix_types.h */ -typedef __kernel_old_uid_t old_uid_t; -typedef __kernel_old_gid_t old_gid_t; -#endif /* CONFIG_UID16 */ - -/* libc5 includes this file to define uid_t, thus uid_t can never change - * when it is included by non-kernel code - */ -#else -typedef __kernel_uid_t uid_t; -typedef __kernel_gid_t gid_t; -#endif /* __KERNEL__ */ - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __kernel_loff_t loff_t; -#endif - -/* - * The following typedefs are also protected by individual ifdefs for - * historical reasons: - */ -#ifndef _SIZE_T -#define _SIZE_T -typedef __kernel_size_t size_t; -#endif - -#ifndef _SSIZE_T -#define _SSIZE_T -typedef __kernel_ssize_t ssize_t; -#endif - -#ifndef _PTRDIFF_T -#define _PTRDIFF_T -typedef __kernel_ptrdiff_t ptrdiff_t; -#endif - -#ifndef _TIME_T -#define _TIME_T -typedef __kernel_time_t time_t; -#endif - -#ifndef _CLOCK_T -#define _CLOCK_T -typedef __kernel_clock_t clock_t; -#endif - -#ifndef _CADDR_T -#define _CADDR_T -typedef __kernel_caddr_t caddr_t; -#endif - -/* bsd */ -typedef unsigned char u_char; -typedef unsigned short u_short; -typedef unsigned int u_int; -typedef unsigned long u_long; - -/* sysv */ -typedef unsigned char unchar; -typedef unsigned short ushort; -typedef unsigned int uint; -typedef unsigned long ulong; - -#ifndef __BIT_TYPES_DEFINED__ -#define __BIT_TYPES_DEFINED__ - -typedef __u8 u_int8_t; -typedef __s8 int8_t; -typedef __u16 u_int16_t; -typedef __s16 int16_t; -typedef __u32 u_int32_t; -typedef __s32 int32_t; - -#endif /* !(__BIT_TYPES_DEFINED__) */ - -typedef __u8 uint8_t; -typedef __u16 uint16_t; -typedef __u32 uint32_t; - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __u64 uint64_t; -typedef __u64 u_int64_t; -typedef __s64 int64_t; -#endif - -#endif /* __KERNEL_STRICT_NAMES */ - -/* - * Below are truly Linux-specific types that should never collide with - * any application/library that wants linux/types.h. - */ - -struct ustat { - __kernel_daddr_t f_tfree; - __kernel_ino_t f_tinode; - char f_fname[6]; - char f_fpack[6]; -}; - -#endif /* _LINUX_TYPES_H */ diff --git a/uart-loader/include/malloc.h b/uart-loader/include/malloc.h deleted file mode 120000 index 9e84013..0000000 --- a/uart-loader/include/malloc.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/malloc.h \ No newline at end of file diff --git a/uart-loader/include/mmc.h b/uart-loader/include/mmc.h deleted file mode 120000 index 1e59fb9..0000000 --- a/uart-loader/include/mmc.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/mmc.h \ No newline at end of file diff --git a/uart-loader/include/ns16550.h b/uart-loader/include/ns16550.h deleted file mode 100644 index 36d2d40..0000000 --- a/uart-loader/include/ns16550.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - *This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * NS16550 Serial Port - * originally from linux source (arch/ppc/boot/ns16550.h) - * modified slightly to - * have addresses as offsets from CFG_ISA_BASE - * added a few more definitions - * added prototypes for ns16550.c - * reduced no of com ports to 2 - * modifications (c) Rob Taylor, Flying Pig Systems. 2000. - */ - -#if (CFG_NS16550_REG_SIZE == 1) -struct NS16550 { - unsigned char rbr; /* 0 */ - unsigned char ier; /* 1 */ - unsigned char fcr; /* 2 */ - unsigned char lcr; /* 3 */ - unsigned char mcr; /* 4 */ - unsigned char lsr; /* 5 */ - unsigned char msr; /* 6 */ - unsigned char scr; /* 7 */ -} __attribute__ ((packed)); -#elif (CFG_NS16550_REG_SIZE == 2) -struct NS16550 { - unsigned short rbr; /* 0 */ - unsigned short ier; /* 1 */ - unsigned short fcr; /* 2 */ - unsigned short lcr; /* 3 */ - unsigned short mcr; /* 4 */ - unsigned short lsr; /* 5 */ - unsigned short msr; /* 6 */ - unsigned short scr; /* 7 */ -} __attribute__ ((packed)); -#elif (CFG_NS16550_REG_SIZE == 4) -struct NS16550 { - unsigned long rbr; /* 0 */ - unsigned long ier; /* 1 */ - unsigned long fcr; /* 2 */ - unsigned long lcr; /* 3 */ - unsigned long mcr; /* 4 */ - unsigned long lsr; /* 5 */ - unsigned long msr; /* 6 */ - unsigned long scr; /* 7 */ -} __attribute__ ((packed)); -#elif (CFG_NS16550_REG_SIZE == -4) -struct NS16550 { - unsigned char rbr; /* 0 */ - int pad1:24; - unsigned char ier; /* 1 */ - int pad2:24; - unsigned char fcr; /* 2 */ - int pad3:24; - unsigned char lcr; /* 3 */ - int pad4:24; - unsigned char mcr; /* 4 */ - int pad5:24; - unsigned char lsr; /* 5 */ - int pad6:24; - unsigned char msr; /* 6 */ - int pad7:24; - unsigned char scr; /* 7 */ - int pad8:24; -#if defined(CONFIG_OMAP) - unsigned char mdr1; /* mode select reset TL16C750*/ -#endif -#ifdef CONFIG_OMAP1510 - int pad9:24; - unsigned long pad[10]; - unsigned char osc_12m_sel; - int pad10:24; -#endif -} __attribute__ ((packed)); -#else -#error "Please define NS16550 registers size." -#endif - -#define thr rbr -#define iir fcr -#define dll rbr -#define dlm ier - -typedef volatile struct NS16550 *NS16550_t; - -#define FCR_FIFO_EN 0x01 /* Fifo enable */ -#define FCR_RXSR 0x02 /* Receiver soft reset */ -#define FCR_TXSR 0x04 /* Transmitter soft reset */ - -#define MCR_DTR 0x01 -#define MCR_RTS 0x02 -#define MCR_DMA_EN 0x04 -#define MCR_TX_DFR 0x08 - -#define LCR_WLS_MSK 0x03 /* character length slect mask */ -#define LCR_WLS_5 0x00 /* 5 bit character length */ -#define LCR_WLS_6 0x01 /* 6 bit character length */ -#define LCR_WLS_7 0x02 /* 7 bit character length */ -#define LCR_WLS_8 0x03 /* 8 bit character length */ -#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define LCR_PEN 0x08 /* Parity eneble */ -#define LCR_EPS 0x10 /* Even Parity Select */ -#define LCR_STKP 0x20 /* Stick Parity */ -#define LCR_SBRK 0x40 /* Set Break */ -#define LCR_BKSE 0x80 /* Bank select enable */ - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -#ifdef CONFIG_OMAP1510 -#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */ -#endif - -/* useful defaults for LCR */ -#define LCR_8N1 0x03 - -void NS16550_init (NS16550_t com_port, int baud_divisor); -void NS16550_putc (NS16550_t com_port, char c); -char NS16550_getc (NS16550_t com_port); -int NS16550_tstc (NS16550_t com_port); -void NS16550_reinit (NS16550_t com_port, int baud_divisor); diff --git a/uart-loader/include/part.h b/uart-loader/include/part.h deleted file mode 120000 index 766e417..0000000 --- a/uart-loader/include/part.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/part.h \ No newline at end of file diff --git a/uart-loader/lib/Makefile b/uart-loader/lib/Makefile deleted file mode 100644 index 341cd54..0000000 --- a/uart-loader/lib/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# (C) Copyright 2004 Texas Instruments -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = lib$(ARCH).a - -AOBJS = _udivsi3.o _umodsi3.o - -COBJS = board.o ecc_256.o ecc_512.o printf.o div0.o - -OBJS = $(AOBJS) $(COBJS) - -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-loader/lib/_udivsi3.S b/uart-loader/lib/_udivsi3.S deleted file mode 100644 index 2cdcd48..0000000 --- a/uart-loader/lib/_udivsi3.S +++ /dev/null @@ -1,77 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -dividend .req r0 -divisor .req r1 -result .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __udivsi3 - .type __udivsi3 ,function - .align 0 - __udivsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - mov result, #0 - cmp dividend, divisor - bcc Lgot_result -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions, and note which bits - @ are done in the result. On the final pass, this may subtract - @ too much from the dividend, but the result will be ok, since the - @ "bit" will have been shifted out at the bottom. - cmp dividend, divisor - subcs dividend, dividend, divisor - orrcs result, result, curbit - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs result, result, curbit, lsr #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs result, result, curbit, lsr #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs result, result, curbit, lsr #3 - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 -Lgot_result: - mov r0, result - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __udivsi3 , . - __udivsi3 -/* # 235 "libgcc1.S" */ -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/uart-loader/lib/_umodsi3.S b/uart-loader/lib/_umodsi3.S deleted file mode 100644 index e4aebe8..0000000 --- a/uart-loader/lib/_umodsi3.S +++ /dev/null @@ -1,88 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -/* # 145 "libgcc1.S" */ -dividend .req r0 -divisor .req r1 -overdone .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __umodsi3 - .type __umodsi3 ,function - .align 0 - __umodsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - cmp dividend, divisor - movcc pc, lr -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions. On the final pass, this may - @ subtract too much from the dividend, so keep track of which - @ subtractions are done, we can fix them up afterwards... - mov overdone, #0 - cmp dividend, divisor - subcs dividend, dividend, divisor - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs overdone, overdone, curbit, ror #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs overdone, overdone, curbit, ror #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs overdone, overdone, curbit, ror #3 - mov ip, curbit - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 - @ Any subtractions that we should not have done will be recorded in - @ the top three bits of "overdone". Exactly which were not needed - @ are governed by the position of the bit, stored in ip. - @ If we terminated early, because dividend became zero, - @ then none of the below will match, since the bit in ip will not be - @ in the bottom nibble. - ands overdone, overdone, #0xe0000000 - moveq pc, lr @ No fixups needed - tst overdone, ip, ror #3 - addne dividend, dividend, divisor, lsr #3 - tst overdone, ip, ror #2 - addne dividend, dividend, divisor, lsr #2 - tst overdone, ip, ror #1 - addne dividend, dividend, divisor, lsr #1 - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __umodsi3 , . - __umodsi3 -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/uart-loader/lib/board.c b/uart-loader/lib/board.c deleted file mode 100644 index 535f7eb..0000000 --- a/uart-loader/lib/board.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Copyright (C) 2005 Texas Instruments. - * - * (C) Copyright 2004 - * Jian Zhang, Texas Instruments, jzhang@ti.com. - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#ifdef CFG_PRINTF -int print_info(void) -{ - printf ("\n\nTexas Instruments X-Loader 1.41 (" - __DATE__ " - " __TIME__ ")\n"); - return 0; -} -#endif -typedef int (init_fnc_t) (void); - -init_fnc_t *init_sequence[] = { - cpu_init, /* basic cpu dependent setup */ - board_init, /* basic board dependent setup */ -#ifdef CFG_PRINTF - serial_init, /* serial communications setup */ - print_info, -#endif - nand_init, /* board specific nand init */ - NULL, -}; - -#ifdef CFG_CMD_FAT -extern char * strcpy(char * dest,const char *src); -#else -char * strcpy(char * dest,const char *src) -{ - char *tmp = dest; - - while ((*dest++ = *src++) != '\0') - /* nothing */; - return tmp; -} -#endif - -#ifdef CONFIG_MMC -int mmc_read_bootloader(int dev, int part) -{ - long size; - unsigned long offset = CFG_LOADADDR; - block_dev_desc_t *dev_desc = NULL; - unsigned char ret = 0; - - ret = mmc_init(dev); - if (ret != 0){ - printf("\n MMC init failed \n"); - return -1; - } - - if (part) { /* FAT Read for extenal SD card */ - dev_desc = mmc_get_dev(dev); - size = file_fat_read("u-boot.bin", (unsigned char *)offset, 0); - if (size == -1) - return -1; - } else { /* RAW read for EMMC */ - ret = mmc_read(dev, 0x400, (unsigned char *)offset, 0x60000); - if (ret != 1) - return -1; - } - - return 0; -} -#endif - -extern int do_load_serial_bin(ulong offset, int baudrate); -extern int do_comand_line(void); - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - -void start_armboot (void) -{ - init_fnc_t **init_fnc_ptr; - int i; - uchar *buf; - char boot_dev_name[8]; - u32 boot_device = 0; - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } -#ifdef START_LOADB_DOWNLOAD - strcpy(boot_dev_name, "UART"); - do_load_serial_bin (CFG_LOADADDR, 115200); - do_comand_line(); -#else // START_LOADB_DOWNLOAD - /* Read boot device from saved scratch pad */ - boot_device = __raw_readl(0x480029c0) & 0xff; - buf = (uchar*) CFG_LOADADDR; - - switch(boot_device) { - case 0x03: - strcpy(boot_dev_name, "ONENAND"); -#if defined(CFG_ONENAND) - for (i = ONENAND_START_BLOCK; i < ONENAND_END_BLOCK; i++) { - if (!onenand_read_block(buf, i)) - buf += ONENAND_BLOCK_SIZE; - else - goto error; - } -#endif - break; - case 0x02: - default: - strcpy(boot_dev_name, "NAND"); -#if defined(CFG_NAND) - for (i = NAND_UBOOT_START; i < NAND_UBOOT_END; - i+= NAND_BLOCK_SIZE) { - if (!nand_read_block(buf, i)) - buf += NAND_BLOCK_SIZE; /* advance buf ptr */ - } -#endif - break; - case 0x05: - strcpy(boot_dev_name, "EMMC"); -#if defined(CONFIG_MMC) - if (mmc_read_bootloader(1, 0) != 0) - goto error; -#else - goto error; -#endif - break; - case 0x06: - strcpy(boot_dev_name, "MMC/SD1"); -#if defined(CONFIG_MMC) && defined(CFG_CMD_FAT) - if (mmc_read_bootloader(0, 1) != 0) - goto error; -#else - goto error; -#endif - break; - }; -#endif // START_LOADB_DOWNLOAD - /* go run U-Boot and never return */ -// printf("Address of serial_printf = %08x\n", &serial_printf); - printf("Starting OS Bootloader from %s ...\n", boot_dev_name); - ((init_fnc_t *)CFG_LOADADDR)(); - - /* should never come here */ -#if defined(CFG_ONENAND) || defined(CONFIG_MMC) -error: -#endif - printf("Could not load or run bootloader!\n"); - hang(); -} - -#if 0 -#include - - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} -static inline void udelay(unsigned long us) -{ - delay(us * 200); /* approximate */ -} - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) - -#define MUX_VAL(OFFSET,VALUE)\ -__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); - -#define CP(x) (CONTROL_PADCONF_##x) - -void hang (void) -{ - /* call board specific hang function */ - board_hang(); - - /* if board_hang() returns, hange here */ - printf("X-Loader hangs\n"); - - for(;;) { - MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/ - udelay(500*1000); - MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/ - udelay(500*1000); - } -} - -#else - -void hang (void) -{ - /* call board specific hang function */ - board_hang(); - - /* if board_hang() returns, hange here */ - printf("X-Loader hangs\n"); - - for(;;) - ; -} - -#endif diff --git a/uart-loader/lib/div0.c b/uart-loader/lib/div0.c deleted file mode 100644 index 6267bf1..0000000 --- a/uart-loader/lib/div0.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* Replacement (=dummy) for GNU/Linux division-by zero handler */ -void __div0 (void) -{ - extern void hang (void); - - hang(); -} diff --git a/uart-loader/lib/ecc_256.c b/uart-loader/lib/ecc_256.c deleted file mode 100644 index 92c310f..0000000 --- a/uart-loader/lib/ecc_256.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * (C) Copyright 2000 Texas Instruments - * - * This file os based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifndef CFG_SW_ECC_512 - -/* - * Pre-calculated 256-way 1 byte column parity - */ -static const u_char nand_ecc_precalc_table[] = { - 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00, - 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, - 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, - 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, - 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, - 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, - 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, - 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, - 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, - 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, - 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, - 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, - 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, - 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, - 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, - 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 -}; - - -#ifdef NAND_LEGACY -/* - * Creates non-inverted ECC code from line parity - */ -static void nand_trans_result(u_char reg2, u_char reg3, - u_char *ecc_code) -{ - u_char a, b, i, tmp1, tmp2; - - /* Initialize variables */ - a = b = 0x80; - tmp1 = tmp2 = 0; - - /* Calculate first ECC byte */ - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - a >>= 1; - } - - /* Calculate second ECC byte */ - b = 0x80; - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - a >>= 1; - } - - /* Store two of the ECC bytes */ - ecc_code[0] = tmp1; - ecc_code[1] = tmp2; -} - -/* - * Calculate 3 byte ECC code for 256 byte block - */ -/* ECC Calculation is different between NAND and NAND Legacy code - * in U-Boot. If NAND_LEGACY is enabled in u-boot it should be - * enabled in the config file in x-loader also - */ -void nand_calculate_ecc (const u_char *dat, u_char *ecc_code) -{ - u_char idx, reg1, reg3; - int j; - - /* Initialize variables */ - reg1 = reg3 = 0; - ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; - - /* Build up column parity */ - for(j = 0; j < 256; j++) { - - /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[dat[j]]; - reg1 ^= idx; - - /* All bit XOR = 1 ? */ - if (idx & 0x40) { - reg3 ^= (u_char) j; - - } - } - - /* Create non-inverted ECC code from line parity */ - nand_trans_result((reg1 & 0x40) ? ~reg3 : reg3, reg3, ecc_code); - - /* Calculate final ECC code */ - ecc_code[0] = ~ecc_code[0]; - ecc_code[1] = ~ecc_code[1]; - ecc_code[2] = ((~reg1) << 2) | 0x03; -} - -/* - * Detect and correct a 1 bit error for 256 byte block - */ -int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc) -{ - u_char a, b, c, d1, d2, d3, add, bit, i; - - /* Do error detection */ - d1 = calc_ecc[0] ^ read_ecc[0]; - d2 = calc_ecc[1] ^ read_ecc[1]; - d3 = calc_ecc[2] ^ read_ecc[2]; - - if ((d1 | d2 | d3) == 0) { - /* No errors */ - return 0; - } - else { - a = (d1 ^ (d1 >> 1)) & 0x55; - b = (d2 ^ (d2 >> 1)) & 0x55; - c = (d3 ^ (d3 >> 1)) & 0x54; - - /* Found and will correct single bit error in the data */ - if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { - c = 0x80; - add = 0; - a = 0x80; - for (i=0; i<4; i++) { - if (d1 & c) - add |= a; - c >>= 2; - a >>= 1; - } - c = 0x80; - for (i=0; i<4; i++) { - if (d2 & c) - add |= a; - c >>= 2; - a >>= 1; - } - bit = 0; - b = 0x04; - c = 0x80; - for (i=0; i<3; i++) { - if (d3 & c) - bit |= b; - c >>= 2; - b >>= 1; - } - b = 0x01; - a = dat[add]; - a ^= (b << bit); - dat[add] = a; - return 1; - } - else { - i = 0; - while (d1) { - if (d1 & 0x01) - ++i; - d1 >>= 1; - } - while (d2) { - if (d2 & 0x01) - ++i; - d2 >>= 1; - } - while (d3) { - if (d3 & 0x01) - ++i; - d3 >>= 1; - } - if (i == 1) { - /* ECC Code Error Correction */ - read_ecc[0] = calc_ecc[0]; - read_ecc[1] = calc_ecc[1]; - read_ecc[2] = calc_ecc[2]; - return 2; - } - else { - /* Uncorrectable Error */ - return -1; - } - } - } - - /* Should never happen */ - return -1; -} -#else /* not NAND_LEGACY */ -void nand_calculate_ecc(const u_char *dat, u_char *ecc_code) -{ - uint8_t idx, reg1, reg2, reg3, tmp1, tmp2; - int i; - - /* Initialize variables */ - reg1 = reg2 = reg3 = 0; - - /* Build up column parity */ - for(i = 0; i < 256; i++) { - /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[*dat++]; - reg1 ^= (idx & 0x3f); - - /* All bit XOR = 1 ? */ - if (idx & 0x40) { - reg3 ^= (uint8_t) i; - reg2 ^= ~((uint8_t) i); - } - } - - /* Create non-inverted ECC code from line parity */ - tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */ - tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */ - tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */ - tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */ - tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */ - tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */ - tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */ - tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */ - - tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */ - tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */ - tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */ - tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */ - tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */ - tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */ - tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */ - tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */ - - /* Calculate final ECC code */ - ecc_code[0] = ~tmp1; - ecc_code[1] = ~tmp2; - ecc_code[2] = ((~reg1) << 2) | 0x03; -} - -static inline int countbits(uint32_t byte) -{ - int res = 0; - - for (;byte; byte >>= 1) - res += byte & 0x01; - return res; -} - -/* - * nand_correct_data - [NAND Interface] Detect and correct bit error(s) - * @mtd: MTD block structure - * @dat: raw data read from the chip - * @read_ecc: ECC from the chip - * @calc_ecc: the ECC calculated from raw data - * - * Detect and correct a 1 bit error for 256 byte block - */ -int nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc) -{ - uint8_t s0, s1, s2; - - s0 = calc_ecc[0] ^ read_ecc[0]; - s1 = calc_ecc[1] ^ read_ecc[1]; - s2 = calc_ecc[2] ^ read_ecc[2]; - - if ((s0 | s1 | s2) == 0) - return 0; - -/* Check for a single bit error */ - if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 && - ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 && - ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) { - - uint32_t byteoffs, bitnum; - - byteoffs = (s1 << 0) & 0x80; - byteoffs |= (s1 << 1) & 0x40; - byteoffs |= (s1 << 2) & 0x20; - byteoffs |= (s1 << 3) & 0x10; - - byteoffs |= (s0 >> 4) & 0x08; - byteoffs |= (s0 >> 3) & 0x04; - byteoffs |= (s0 >> 2) & 0x02; - byteoffs |= (s0 >> 1) & 0x01; - - bitnum = (s2 >> 5) & 0x04; - bitnum |= (s2 >> 4) & 0x02; - bitnum |= (s2 >> 3) & 0x01; - - dat[byteoffs] ^= (1 << bitnum); - - return 1; - } - - if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) - return 1; - - return -1; -} -#endif /* NAND_LEGACY */ -#endif /* ! CFG_SW_ECC_512 */ diff --git a/uart-loader/lib/ecc_512.c b/uart-loader/lib/ecc_512.c deleted file mode 100644 index 29647c6..0000000 --- a/uart-loader/lib/ecc_512.c +++ /dev/null @@ -1,420 +0,0 @@ -/* - * (C) Copyright 2000 Texas Instruments - * - * This file os based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include - -#ifdef CFG_SW_ECC_512 - -/* - * invparity is a 256 byte table that contains the odd parity - * for each byte. So if the number of bits in a byte is even, - * the array element is 1, and when the number of bits is odd - * the array eleemnt is 0. - */ -static const char invparity[256] = { - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1 -}; - -/* - * bitsperbyte contains the number of bits per byte - * this is only used for testing and repairing parity - * (a precalculated value slightly improves performance) - */ -static const char bitsperbyte[256] = { - 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8, -}; - -/* - * addressbits is a lookup table to filter out the bits from the xor-ed - * ecc data that identify the faulty location. - * this is only used for repairing parity - * see the comments in nand_correct_data for more details - */ -static const char addressbits[256] = { - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f -}; - -/* - * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte - * block - * @mtd: MTD block structure - * @buf: input buffer with raw data - * @code: output buffer with ECC - */ -void nand_calculate_ecc(const u_char *buf, u_char *code) -{ - int i; - const uint32_t *bp = (uint32_t *)buf; - /* 256 or 512 bytes/ecc */ - int eccsize = 512; - const uint32_t eccsize_mult = eccsize >> 8; - uint32_t cur; /* current value in buffer */ - /* rp0..rp15..rp17 are the various accumulated parities (per byte) */ - uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7; - uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16; - uint32_t rp17 = 0; - uint32_t par; /* the cumulative parity for all data */ - uint32_t tmppar; /* the cumulative parity for this iteration; - for rp12, rp14 and rp16 at the end of the - loop */ - par = 0; - rp4 = 0; - rp6 = 0; - rp8 = 0; - rp10 = 0; - rp12 = 0; - rp14 = 0; - rp16 = 0; - - /* - * The loop is unrolled a number of times; - * This avoids if statements to decide on which rp value to update - * Also we process the data by longwords. - * Note: passing unaligned data might give a performance penalty. - * It is assumed that the buffers are aligned. - * tmppar is the cumulative sum of this iteration. - * needed for calculating rp12, rp14, rp16 and par - * also used as a performance improvement for rp6, rp8 and rp10 - */ - for (i = 0; i < eccsize_mult << 2; i++) { - cur = *bp++; - tmppar = cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= tmppar; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp8 ^= tmppar; - - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp10 ^= tmppar; - - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp6 ^= cur; - rp8 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= cur; - rp8 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp8 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp8 ^= cur; - - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - - par ^= tmppar; - if ((i & 0x1) == 0) - rp12 ^= tmppar; - if ((i & 0x2) == 0) - rp14 ^= tmppar; - if (eccsize_mult == 2 && (i & 0x4) == 0) - rp16 ^= tmppar; - } - - /* - * handle the fact that we use longword operations - * we'll bring rp4..rp14..rp16 back to single byte entities by - * shifting and xoring first fold the upper and lower 16 bits, - * then the upper and lower 8 bits. - */ - rp4 ^= (rp4 >> 16); - rp4 ^= (rp4 >> 8); - rp4 &= 0xff; - rp6 ^= (rp6 >> 16); - rp6 ^= (rp6 >> 8); - rp6 &= 0xff; - rp8 ^= (rp8 >> 16); - rp8 ^= (rp8 >> 8); - rp8 &= 0xff; - rp10 ^= (rp10 >> 16); - rp10 ^= (rp10 >> 8); - rp10 &= 0xff; - rp12 ^= (rp12 >> 16); - rp12 ^= (rp12 >> 8); - rp12 &= 0xff; - rp14 ^= (rp14 >> 16); - rp14 ^= (rp14 >> 8); - rp14 &= 0xff; - if (eccsize_mult == 2) { - rp16 ^= (rp16 >> 16); - rp16 ^= (rp16 >> 8); - rp16 &= 0xff; - } - - /* - * we also need to calculate the row parity for rp0..rp3 - * This is present in par, because par is now - * rp3 rp3 rp2 rp2 in little endian and - * rp2 rp2 rp3 rp3 in big endian - * as well as - * rp1 rp0 rp1 rp0 in little endian and - * rp0 rp1 rp0 rp1 in big endian - * First calculate rp2 and rp3 - */ - rp3 = (par >> 16); - rp3 ^= (rp3 >> 8); - rp3 &= 0xff; - rp2 = par & 0xffff; - rp2 ^= (rp2 >> 8); - rp2 &= 0xff; - - /* reduce par to 16 bits then calculate rp1 and rp0 */ - par ^= (par >> 16); - rp1 = (par >> 8) & 0xff; - rp0 = (par & 0xff); - - /* finally reduce par to 8 bits */ - par ^= (par >> 8); - par &= 0xff; - - /* - * and calculate rp5..rp15..rp17 - * note that par = rp4 ^ rp5 and due to the commutative property - * of the ^ operator we can say: - * rp5 = (par ^ rp4); - * The & 0xff seems superfluous, but benchmarking learned that - * leaving it out gives slightly worse results. No idea why, probably - * it has to do with the way the pipeline in pentium is organized. - */ - rp5 = (par ^ rp4) & 0xff; - rp7 = (par ^ rp6) & 0xff; - rp9 = (par ^ rp8) & 0xff; - rp11 = (par ^ rp10) & 0xff; - rp13 = (par ^ rp12) & 0xff; - rp15 = (par ^ rp14) & 0xff; - if (eccsize_mult == 2) - rp17 = (par ^ rp16) & 0xff; - - /* - * Finally calculate the ecc bits. - * Again here it might seem that there are performance optimisations - * possible, but benchmarks showed that on the system this is developed - * the code below is the fastest - */ - code[1] = - (invparity[rp7] << 7) | - (invparity[rp6] << 6) | - (invparity[rp5] << 5) | - (invparity[rp4] << 4) | - (invparity[rp3] << 3) | - (invparity[rp2] << 2) | - (invparity[rp1] << 1) | - (invparity[rp0]); - code[0] = - (invparity[rp15] << 7) | - (invparity[rp14] << 6) | - (invparity[rp13] << 5) | - (invparity[rp12] << 4) | - (invparity[rp11] << 3) | - (invparity[rp10] << 2) | - (invparity[rp9] << 1) | - (invparity[rp8]); - if (eccsize_mult == 1) - code[2] = - (invparity[par & 0xf0] << 7) | - (invparity[par & 0x0f] << 6) | - (invparity[par & 0xcc] << 5) | - (invparity[par & 0x33] << 4) | - (invparity[par & 0xaa] << 3) | - (invparity[par & 0x55] << 2) | - 3; - else - code[2] = - (invparity[par & 0xf0] << 7) | - (invparity[par & 0x0f] << 6) | - (invparity[par & 0xcc] << 5) | - (invparity[par & 0x33] << 4) | - (invparity[par & 0xaa] << 3) | - (invparity[par & 0x55] << 2) | - (invparity[rp17] << 1) | - (invparity[rp16] << 0); -} - -/** - * nand_correct_data - [NAND Interface] Detect and correct bit error(s) - * @mtd: MTD block structure - * @buf: raw data read from the chip - * @read_ecc: ECC from the chip - * @calc_ecc: the ECC calculated from raw data - * - * Detect and correct a 1 bit error for 256/512 byte block - */ -int nand_correct_data(unsigned char *buf, - unsigned char *read_ecc, unsigned char *calc_ecc) -{ - unsigned char b0, b1, b2; - uint32_t byte_addr; - unsigned char bit_addr; - /* 256 or 512 bytes/ecc */ - int eccsize = 512; - const uint32_t eccsize_mult = eccsize >> 8; - /* - * b0 to b2 indicate which bit is faulty (if any) - * we might need the xor result more than once, - * so keep them in a local var - */ - b0 = read_ecc[1] ^ calc_ecc[1]; - b1 = read_ecc[0] ^ calc_ecc[0]; - b2 = read_ecc[2] ^ calc_ecc[2]; - - /* check if there are any bitfaults */ - - /* repeated if statements are slightly more efficient than switch ... */ - /* ordered in order of likelihood */ - - if ((b0 | b1 | b2) == 0) - return 0; /* no error */ - - if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) && - (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) && - ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) || - (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) { - /* single bit error */ - /* - * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty - * byte, cp 5/3/1 indicate the faulty bit. - * A lookup table (called addressbits) is used to filter - * the bits from the byte they are in. - * A marginal optimisation is possible by having three - * different lookup tables. - * One as we have now (for b0), one for b2 - * (that would avoid the >> 1), and one for b1 (with all values - * << 4). However it was felt that introducing two more tables - * hardly justify the gain. - * - * The b2 shift is there to get rid of the lowest two bits. - * We could also do addressbits[b2] >> 1 but for the - * performace it does not make any difference - */ - if (eccsize_mult == 1) - byte_addr = (addressbits[b1] << 4) + addressbits[b0]; - else - byte_addr = (addressbits[b2 & 0x3] << 8) + - (addressbits[b1] << 4) + addressbits[b0]; - bit_addr = addressbits[b2 >> 2]; - /* flip the bit */ - buf[byte_addr] ^= (1 << bit_addr); - return 1; - - } - /* count nr of bits; use table lookup, faster than calculating it */ - if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1) - return 1; /* error in ecc data; no action needed */ - - return -1; -} -#endif /* CFG_SW_ECC_512 */ diff --git a/uart-loader/lib/printf.c b/uart-loader/lib/printf.c deleted file mode 100644 index 91d22fc..0000000 --- a/uart-loader/lib/printf.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * - * Based on the following file: - * linux/lib/vsprintf.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* vsprintf.c -- Lars Wirzenius & Linus Torvalds. */ -/* - * Wirzenius wrote this portably, Torvalds fucked it up :-) - */ - -#include -#include - -#ifdef CFG_PRINTF - -/* we use this so that we can do without the ctype library */ -#define is_digit(c) ((c) >= '0' && (c) <= '9') - -size_t strnlen(const char * s, size_t count) -{ - const char *sc; - - for (sc = s; count-- && *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} - -static int skip_atoi(const char **s) -{ - int i=0; - - while (is_digit(**s)) - i = i*10 + *((*s)++) - '0'; - return i; -} - -#define ZEROPAD 1 /* pad with zero */ -#define SIGN 2 /* unsigned/signed long */ -#define PLUS 4 /* show plus */ -#define SPACE 8 /* space if plus */ -#define LEFT 16 /* left justified */ -#define SPECIAL 32 /* 0x */ -#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ - -#define do_div(n,base) ({ \ -int __res; \ -__res = ((unsigned long) n) % (unsigned) base; \ -n = ((unsigned long) n) / (unsigned) base; \ -__res; }) - -static char * number(char * str, long num, int base, int size, int precision - ,int type) -{ - char c,sign,tmp[66]; - const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; - int i; - - if (type & LARGE) - digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; - if (type & LEFT) - type &= ~ZEROPAD; - if (base < 2 || base > 36) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - if (type & SIGN) { - if (num < 0) { - sign = '-'; - num = -num; - size--; - } else if (type & PLUS) { - sign = '+'; - size--; - } else if (type & SPACE) { - sign = ' '; - size--; - } - } - if (type & SPECIAL) { - if (base == 16) - size -= 2; - else if (base == 8) - size--; - } - i = 0; - if (num == 0) - tmp[i++]='0'; - else while (num != 0) - tmp[i++] = digits[do_div(num,base)]; - if (i > precision) - precision = i; - size -= precision; - if (!(type&(ZEROPAD+LEFT))) - while(size-->0) - *str++ = ' '; - if (sign) - *str++ = sign; - if (type & SPECIAL) { - if (base==8) - *str++ = '0'; - else if (base==16) { - *str++ = '0'; - *str++ = digits[33]; - } - } - if (!(type & LEFT)) - while (size-- > 0) - *str++ = c; - while (i < precision--) - *str++ = '0'; - while (i-- > 0) - *str++ = tmp[i]; - while (size-- > 0) - *str++ = ' '; - return str; -} - - -static int vsprintf(char *buf, const char *fmt, va_list args) -{ - int len; - unsigned long num; - int i, base; - char * str; - const char *s; - - int flags; /* flags to number() */ - - int field_width; /* width of output field */ - int precision; /* min. # of digits for integers; max - number of chars for from string */ - int qualifier; /* 'h', 'l', or 'L' for integer fields */ - - for (str=buf ; *fmt ; ++fmt) { - if (*fmt != '%') { - *str++ = *fmt; - continue; - } - - /* process flags */ - flags = 0; - repeat: - ++fmt; /* this also skips first '%' */ - switch (*fmt) { - case '-': flags |= LEFT; goto repeat; - case '+': flags |= PLUS; goto repeat; - case ' ': flags |= SPACE; goto repeat; - case '#': flags |= SPECIAL; goto repeat; - case '0': flags |= ZEROPAD; goto repeat; - } - - /* get field width */ - field_width = -1; - if (is_digit(*fmt)) - field_width = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - field_width = va_arg(args, int); - if (field_width < 0) { - field_width = -field_width; - flags |= LEFT; - } - } - - /* get the precision */ - precision = -1; - if (*fmt == '.') { - ++fmt; - if (is_digit(*fmt)) - precision = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - precision = va_arg(args, int); - } - if (precision < 0) - precision = 0; - } - - /* get the conversion qualifier */ - qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') { - qualifier = *fmt; - ++fmt; - } - - /* default base */ - base = 10; - - switch (*fmt) { - case 'c': - if (!(flags & LEFT)) - while (--field_width > 0) - *str++ = ' '; - *str++ = (unsigned char) va_arg(args, int); - while (--field_width > 0) - *str++ = ' '; - continue; - - case 's': - s = va_arg(args, char *); - if (!s) - s = ""; - - len = strnlen(s, precision); - - if (!(flags & LEFT)) - while (len < field_width--) - *str++ = ' '; - for (i = 0; i < len; ++i) - *str++ = *s++; - while (len < field_width--) - *str++ = ' '; - continue; - - case 'p': - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= ZEROPAD; - } - str = number(str, - (unsigned long) va_arg(args, void *), 16, - field_width, precision, flags); - continue; - - - case 'n': - if (qualifier == 'l') { - long * ip = va_arg(args, long *); - *ip = (str - buf); - } else { - int * ip = va_arg(args, int *); - *ip = (str - buf); - } - continue; - - case '%': - *str++ = '%'; - continue; - - /* integer number formats - set up the flags and "break" */ - case 'o': - base = 8; - break; - - case 'X': - flags |= LARGE; - case 'x': - base = 16; - break; - - case 'd': - case 'i': - flags |= SIGN; - case 'u': - break; - - default: - *str++ = '%'; - if (*fmt) - *str++ = *fmt; - else - --fmt; - continue; - } - if (qualifier == 'l') - num = va_arg(args, unsigned long); - else if (qualifier == 'h') { - num = (unsigned short) va_arg(args, int); - if (flags & SIGN) - num = (short) num; - } else if (flags & SIGN) - num = va_arg(args, int); - else - num = va_arg(args, unsigned int); - str = number(str, num, base, field_width, precision, flags); - } - *str = '\0'; - return str-buf; -} - -void serial_printf (const char *fmt, ...) -{ - va_list args; - uint i; - char printbuffer[CFG_PBSIZE]; - - va_start (args, fmt); - - /* For this to work, printbuffer must be larger than - * anything we ever want to print. - */ - i = vsprintf (printbuffer, fmt, args); - va_end (args); - - /* Print the string */ - serial_puts (printbuffer); -} -#endif diff --git a/uart-loader/mkconfig b/uart-loader/mkconfig deleted file mode 100755 index 43b6f09..0000000 --- a/uart-loader/mkconfig +++ /dev/null @@ -1,61 +0,0 @@ -#!/bin/sh -e - -# Script to create header files and links to configure -# X-Loader for a specific board. -# -# Parameters: Target Architecture CPU Board -# -# (C) 2004 Texas Instruments -# (C) 2002 DENX Software Engineering, Wolfgang Denk -# - -APPEND=no # Default: Create new config file - -while [ $# -gt 0 ] ; do - case "$1" in - --) shift ; break ;; - -a) shift ; APPEND=yes ;; - *) break ;; - esac -done - -[ $# -lt 4 ] && exit 1 -[ $# -gt 5 ] && exit 1 - -echo "Configuring for $1 board..." - -cd ./include - -# -# Create link to architecture specific headers -# -rm -f asm/arch -ln -s arch-$3 asm/arch - -if [ "$2" = "arm" ] ; then - rm -f asm/proc - ln -s proc-armv asm/proc -fi - -# -# Create include file for Make -# -echo "ARCH = $2" > config.mk -echo "CPU = $3" >> config.mk -echo "BOARD = $4" >> config.mk - -[ "$5" ] && echo "VENDOR = $5" >> config.mk - -# -# Create board specific header file -# -if [ "$APPEND" = "yes" ] # Append to existing config file -then - echo >> config.h -else - > config.h # Create new config file -fi -echo "/* Automatically generated - do not edit */" >>config.h -echo "#include " >>config.h - -exit 0 diff --git a/uart-loader/scripts/mkoneboot.sh b/uart-loader/scripts/mkoneboot.sh deleted file mode 100644 index f0862a5..0000000 --- a/uart-loader/scripts/mkoneboot.sh +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -IMAGE1=x-load.bin.ift -IMAGE2=x-load-signed.ift -TMP=oneloader -PAGESIZE=2048 - -size=`ls -la $IMAGE1 | awk -F' ' '{ printf $5}'` -let remain=$PAGESIZE-$size -dd if=/dev/zero of=$IMAGE2 bs=1 count=512 -#dd if=/dev/zero of=zerofile bs=$remain count=1 > /dev/null 2> /dev/null -cat $IMAGE1>>$IMAGE2 - -rm -f $IMAGE1 - -echo "Create $IMAGE2 completed..." diff --git a/uart-loader/scripts/signGP.c b/uart-loader/scripts/signGP.c deleted file mode 100644 index 0e8ed07..0000000 --- a/uart-loader/scripts/signGP.c +++ /dev/null @@ -1,73 +0,0 @@ -// -// signGP.c -// Read the x-load.bin file and write out the x-load.bin.ift file. -// The signed image is the original pre-pended with the size of the image -// and the load address. If not entered on command line, file name is -// assumed to be x-load.bin in current directory and load address is -// 0x40200800. - -#include -#include -#include -#include -#include -#include - - -main(int argc, char *argv[]) -{ - int i; - char ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch; - FILE *ifile, *ofile; - unsigned long loadaddr, len; - struct stat sinfo; - - - // Default to x-load.bin and 0x40200800. - strcpy(ifname, "x-load.bin"); - loadaddr = 0x40200800; - - if ((argc == 2) || (argc == 3)) - strcpy(ifname, argv[1]); - - if (argc == 3) - loadaddr = strtol(argv[2], NULL, 16); - - // Form the output file name. - strcpy(ofname, ifname); - strcat(ofname, ".ift"); - - // Open the input file. - ifile = fopen(ifname, "rb"); - if (ifile == NULL) { - printf("Cannot open %s\n", ifname); - exit(0); - } - - // Get file length. - stat(ifname, &sinfo); - len = sinfo.st_size; - - // Open the output file and write it. - ofile = fopen(ofname, "wb"); - if (ofile == NULL) { - printf("Cannot open %s\n", ofname); - fclose(ifile); - exit(0); - } - - // Pad 1 sector of zeroes. - //ch = 0x00; - //for (i=0; i<0x200; i++) - // fwrite(&ch, 1, 1, ofile); - - fwrite(&len, 1, 4, ofile); - fwrite(&loadaddr, 1, 4, ofile); - for (i=0; i -# Jian Zhang -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -HOSTARCH := $(shell uname -m | \ - sed -e s/i.86/i386/ \ - -e s/sun4u/sparc64/ \ - -e s/arm.*/arm/ \ - -e s/sa110/arm/ \ - -e s/powerpc/ppc/ \ - -e s/macppc/ppc/) - -HOSTOS := $(shell uname -s | tr A-Z a-z | \ - sed -e 's/\(cygwin\).*/cygwin/') - -export HOSTARCH - -# Deal with colliding definitions from tcsh etc. -VENDOR= - -######################################################################### - -TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) -export TOPDIR - -ifeq (include/config.mk,$(wildcard include/config.mk)) -# load ARCH, BOARD, and CPU configuration -include include/config.mk -export ARCH CPU BOARD VENDOR -# load other configuration -include $(TOPDIR)/config.mk - -ifndef CROSS_COMPILE -CROSS_COMPILE = arm-none-linux-gnueabi- -#CROSS_COMPILE = arm-linux- -export CROSS_COMPILE -endif - -######################################################################### -# X-LOAD objects....order is important (i.e. start must be first) - -OBJS = cpu/$(CPU)/start.o - - -LIBS += board/$(BOARDDIR)/lib$(BOARD).a -LIBS += cpu/$(CPU)/lib$(CPU).a -LIBS += lib/lib$(ARCH).a -LIBS += fs/fat/libfat.a -LIBS += disk/libdisk.a -LIBS += drivers/libdrivers.a -LIBS += common/libcommon.a -.PHONY : $(LIBS) - -# Add GCC lib -PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc - -SUBDIRS = -######################################################################### -######################################################################### - -ALL = x-load.bin System.map - -all: $(ALL) - -ift: $(ALL) x-load.bin.ift - -x-load.bin.ift: signGP System.map x-load.bin - TEXT_BASE=`grep -w _start System.map|cut -d ' ' -f1` - ./signGP x-load.bin $(TEXT_BASE) - cp x-load.bin.ift MLO - -x-load.bin: x-load - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -x-load: $(OBJS) $(LIBS) $(LDSCRIPT) - UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ - --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ - -Map x-load.map -o x-load - -$(LIBS): - $(MAKE) -C `dirname $@` - - -System.map: x-load - @$(NM) $< | \ - grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ - sort > System.map - -oneboot: x-load.bin - scripts/mkoneboot.sh - -signGP: scripts/signGP.c - gcc -O3 -o signGP $< - -######################################################################### -else -all install x-load x-load.srec oneboot depend dep: - @echo "System not configured - see README" >&2 - @ exit 1 -endif - -######################################################################### - -unconfig: - rm -f include/config.h include/config.mk - -#======================================================================== -# ARM -#======================================================================== -######################################################################### -## OMAP1 (ARM92xT) Systems -######################################################################### - -omap1710h3_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs omap1710h3 - -######################################################################### -## OMAP2 (ARM1136) Systems -######################################################################### - -omap2420h4_config : unconfig - @./mkconfig $(@:_config=) arm arm1136 omap2420h4 - -omap2430sdp_config : unconfig - @./mkconfig $(@:_config=) arm arm1136 omap2430sdp - -######################################################################### -## OMAP3 (ARM-CortexA8) Systems -######################################################################### -omap3430sdp_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430sdp -omap3430labrador_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - -omap3430labradordownload_config : unconfig - @./mkconfig omap3430labrador arm omap3 omap3430labrador; \ - echo "#define START_LOADB_DOWNLOAD" >> ./include/config-2.h; \ - cat ./include/config.h >> ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3430zoom2_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - -omap3430zoom2_512m_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed -e ' s/CONFIG_3430ZOOM2/CONFIG_3430ZOOM2_512M/ ' < \ - ./include/configs/omap3430zoom2.h | \ - sed -e ' s/#define CFG_NAND 1/#undef CFG_NAND/ ' \ - >> ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3630zoom3_config : omap3630zoom3_1G_config - -omap3630zoom3_512m_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed s/omap3630zoom3_512m/omap3630zoom3/ < \ - ./include/config.h > ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3630zoom3_1G_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed s/CONFIG_3630ZOOM3/CONFIG_3630ZOOM3_1G/ < \ - ./include/configs/omap3630zoom3.h > ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h - -omap3630sdp_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - -omap3630sdp_1G_config : unconfig - @./mkconfig $(@:_config=) arm omap3 omap3430labrador - sed s/CONFIG_3630SDP/CONFIG_3630SDP_1G/ < \ - ./include/configs/omap3630sdp.h > ./include/config-2.h; \ - mv ./include/config-2.h ./include/config.h -######################################################################### - -clean: - find . -type f \ - \( -name 'core' -o -name '*.bak' -o -name '*~' \ - -o -name '*.o' -o -name '*.a' \) -print \ - | xargs rm -f - -clobber: clean - find . -type f \ - \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \ - -print \ - | xargs rm -f - rm -f $(OBJS) *.bak tags TAGS - rm -fr *.*~ - rm -f x-load x-load.map $(ALL) x-load.bin.ift signGP MLO - rm -f include/asm/proc include/asm/arch - -mrproper \ -distclean: clobber unconfig - -backup: - F=`basename $(TOPDIR)` ; cd .. ; \ - gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F - -######################################################################### diff --git a/uart-monitor/README b/uart-monitor/README deleted file mode 100644 index ae2662a..0000000 --- a/uart-monitor/README +++ /dev/null @@ -1,152 +0,0 @@ -# -# (C) Copyright 2004-2006 Texas Instruments -# -# Some cut/paste from U-Boot README -# (C) Copyright 2000 - 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -Summary: -======== - -This directory contains the source code for X-Loader, an initial program -loader for Embedded boards based on OMAP processors. X-Loader can be -signed by Texas Instruments IFT and installed to Nand flash to achieve -Nand booting. - - -Status: -======= - -The support for Texas Instruments H3 board (OMAP1710) has been implemented -and tested. (May 2004) -The support for Texas Instruments H4 board (OMAP2420) has been implemented -and tested. (Nov 2004) -The support for Texas Instruments 2430SDP board (OMAP2430) has been implemented -and tested. (Jul 2006) -The support for Texas Instruments 3430SDP board (OMAP3430) has been implemented -and tested. (Dec 2006) - - -Support for other OMAP boards can be added. - - -Directory Hierarchy: -==================== - -- board Board dependent files -- cpu CPU specific files -- drivers Commonly used device drivers -- lib Libraries - -- cpu/arm926ejs Files specific to ARM 926 CPUs -- cpu/arm1136 Files specific to ARM 1136 CPUs -- cpu/omap3 Files specific to ARM CortexA8 CPU - - -- board/omap1710h3 - Files specific to OMAP 1710 H3 boards -- board/omap2420h4 - Files specific to OMAP 2420 H4 boards -- board/omap2430sdp - Files specific to OMAP 2430 2430sdp boards -- board/omap3430sdp - Files specific to OMAP 3420sdp boards - - -Software Configuration: -======================= - -Configuration is usually done using C preprocessor defines. Configuration -depends on the combination of board and CPU type; all such information is -kept in a configuration file "include/configs/.h". - -Example: For a H3 module, all configuration settings are in -"include/configs/omap1710h3.h". - -For all supported boards there are ready-to-use default -configurations available; just type "make _config". - -Example: For a H3 module type: - - cd x-load - make omap1710h3_config - -After a board has been configured, type "make" to build it supposing the -needed cross tools are in your path. - - -Image Format: -============= - -X-Loader expects OS boot loader (e.g. U-Boot) in Nand flash using -JFFS2 style ECC. - - -Prepare Booting Nand Flash: -=========================== - -After you have built x-load.bin for your board, you need to do the -followings to get it into Nand flash: - -1. Use Texas Instruments IFT to sign x-load.bin. This results in a -signed image called x-load.bin.ift. -2. Use Texas Instruments FlashPrep to generate a .out file using -FlashWriterNand and specifying 0 as nand target address. -3. Use Texas instrumnets Code Composer Studio to run the .out file -which flashes x-load.bin.ift to Nand flash. - -Next you need to get your OS boot loader to Nand at the address your -X-Loader expects. For the H3 example, you can use U-Boot to flash U-Boot. -You can't use FlashWriterNand because it uses ROM code ECC style. - - -More Information -================ - -OMAP1710 NAND Booting Design Document has more information. - -Implemenation notes: -==================== -H3, H4 support NAND flash booting -2430sdp & 3430sdp support OneNAND booting - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/uart-monitor/arm_config.mk b/uart-monitor/arm_config.mk deleted file mode 100644 index 73d9625..0000000 --- a/uart-monitor/arm_config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2000-2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ diff --git a/uart-monitor/board/omap3430labrador/Makefile b/uart-monitor/board/omap3430labrador/Makefile deleted file mode 100644 index c03134c..0000000 --- a/uart-monitor/board/omap3430labrador/Makefile +++ /dev/null @@ -1,47 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = lib$(BOARD).a - -OBJS := omap3430labrador.o -SOBJS := platform.o - -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ - --include .depend - -######################################################################### diff --git a/uart-monitor/board/omap3430labrador/config.mk b/uart-monitor/board/omap3430labrador/config.mk deleted file mode 100644 index d6ad6c5..0000000 --- a/uart-monitor/board/omap3430labrador/config.mk +++ /dev/null @@ -1,22 +0,0 @@ -# -# (C) Copyright 2006 -# Texas Instruments, -# -# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0 -# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 -# Physical Address: -# 8000'0000 (bank0) -# A000'0000 (bank1) - re-mappable below CS1 - -# For use if you want X-Loader to relocate from SRAM to DDR -#TEXT_BASE = 0x80e80000 - -# For XIP in 64K of SRAM or debug (GP device has it all availabe) -# SRAM 40200000-4020FFFF base -# initial stack at 0x4020fffc used in s_init (below xloader). -# The run time stack is (above xloader, 2k below) -# If any globals exist there needs to be room for them also -TEXT_BASE = 0x40208800 diff --git a/uart-monitor/board/omap3430labrador/omap3430labrador.c b/uart-monitor/board/omap3430labrador/omap3430labrador.c deleted file mode 100644 index 1a4e243..0000000 --- a/uart-monitor/board/omap3430labrador/omap3430labrador.c +++ /dev/null @@ -1,875 +0,0 @@ -/* - * (C) Copyright 2006-2009 - * Texas Instruments, - * Jian Zhang - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Used to index into DPLL parameter tables */ -struct dpll_param { - unsigned int m; - unsigned int n; - unsigned int fsel; - unsigned int m2; -}; - -#ifdef CONFIG_OMAP36XX -struct dpll_per_param { - unsigned int sys_clk; - unsigned int m; - unsigned int n; - unsigned int clkin; - unsigned int sd; - unsigned int dco; - unsigned int m2; - unsigned int m3; - unsigned int m4; - unsigned int m5; - unsigned int m6; - unsigned int m2div; -}; -typedef struct dpll_per_param dpll_per_param; -#define MAX_SIL_INDEX 1 -#else -typedef struct dpll_param dpll_per_param; -#define MAX_SIL_INDEX 3 -#endif - -typedef struct dpll_param dpll_param; - -/* Following functions are exported from lowlevel_init.S */ -extern dpll_param * get_mpu_dpll_param(void); -extern dpll_param * get_core_dpll_param(void); -extern dpll_param * get_per_dpll_param(void); - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -/***************************************** - * Routine: board_init - * Description: Early hardware init. - *****************************************/ -int board_init (void) -{ - return 0; -} - -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - int mode; - mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); - return(mode >>= 8); -} - -/***************************************************************** - * sr32 - clear & set a value in a bit range for a 32 bit address - *****************************************************************/ -void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) -{ - u32 tmp, msk = 0; - msk = 1 << num_bits; - --msk; - tmp = __raw_readl(addr) & ~(msk << start_bit); - tmp |= value << start_bit; - __raw_writel(tmp, addr); -} - -/********************************************************************* - * wait_on_value() - common routine to allow waiting for changes in - * volatile regs. - *********************************************************************/ -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) -{ - u32 i = 0, val; - do { - ++i; - val = __raw_readl(read_addr) & read_bit_mask; - if (val == match_value) - return (1); - if (i == bound) - return (0); - } while (1); -} - -#ifdef CFG_3430SDRAM_DDR -/********************************************************************* - * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. - *********************************************************************/ -void config_3430sdram_ddr(void) -{ - /* check if its h/w or s/w reset for warm reset workaround */ - if (__raw_readl(PRM_RSTTST) & 0x2) { - /* Enable SDRC clock & wait SDRC idle status to access*/ - sr32(CM_ICLKEN1_CORE, 1, 1, 0x1); - wait_on_value(BIT1, 0, CM_IDLEST1_CORE, LDELAY); - } else { - /* do a SDRC reset between types to clear regs */ - __raw_writel(SOFTRESET, SDRC_SYSCONFIG);/* reset sdrc */ - /* wait on reset */ - wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); - __raw_writel(0, SDRC_SYSCONFIG);/* clear soft reset */ - } - /* Clear reset sources */ - __raw_writel(0xfff, PRM_RSTTST); - - /* setup sdrc to ball mux */ - __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); - - /* Configure the first chip select */ - /* set mdcfg */ - __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); - - /* set timing */ - __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); - __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); - __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_0); - - /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ - __raw_writel(CMD_NOP, SDRC_MANUAL_0); - delay(5000); - __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); - - /* set mr0 */ - __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); -#ifdef CONFIG_2GBDDR - __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); - - /* set timing */ - __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_1); - __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); - __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_1); - - /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ - __raw_writel(CMD_NOP, SDRC_MANUAL_1); - delay(5000); - __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); - - /* set mr0 */ - __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); - - /* Configure cs1 to be just behind cs0 - 128meg boundary */ -#if defined(CONFIG_3430ZOOM2_512M) || \ - defined(CONFIG_3630ZOOM3) || defined(CONFIG_3630SDP) - /* 2 * 128M = 256M for cs1 */ - __raw_writel(0x2, SDRC_CS_CFG); -#elif defined(CONFIG_3630SDP_1G) || defined(CONFIG_3630ZOOM3_1G) - /* 4 * 128M = 512M for cs1 */ - __raw_writel(0x4, SDRC_CS_CFG); -#else - /* 1 * 128M = 128M for cs1 */ - __raw_writel(0x1, SDRC_CS_CFG); -#endif - - /* set up dllB-CS1 */ - __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); - delay(0x2000); /* give time to lock */ -#endif - - /* set up dllA-CS0 */ - __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); - delay(0x2000); /* give time to lock */ - -} -#endif // CFG_3430SDRAM_DDR - -/************************************************************* - * get_sys_clk_speed - determine reference oscillator speed - * based on known 32kHz clock and gptimer. - *************************************************************/ -u32 get_osc_clk_speed(void) -{ - u32 start, cstart, cend, cdiff, val; - - val = __raw_readl(PRM_CLKSRC_CTRL); - /* If SYS_CLK is being divided by 2, remove for now */ - val = (val & (~BIT7)) | BIT6; - __raw_writel(val, PRM_CLKSRC_CTRL); - - /* enable timer2 */ - val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; - __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ - - /* Enable I and F Clocks for GPT1 */ - val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; - __raw_writel(val, CM_ICLKEN_WKUP); - val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; - __raw_writel(val, CM_FCLKEN_WKUP); - - __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ - __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ - /* enable 32kHz source *//* enabled out of reset */ - /* determine sys_clk via gauging */ - - start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ - while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ - cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ - while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ - cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ - cdiff = cend - cstart; /* get elapsed ticks */ - - /* based on number of ticks assign speed */ - if (cdiff > 19000) - return (S38_4M); - else if (cdiff > 15200) - return (S26M); - else if (cdiff > 13000) - return (S24M); - else if (cdiff > 9000) - return (S19_2M); - else if (cdiff > 7600) - return (S13M); - else - return (S12M); -} - -/****************************************************************************** - * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on - * -- input oscillator clock frequency. - * - *****************************************************************************/ -void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) -{ - if(osc_clk == S38_4M) - *sys_clkin_sel= 4; - else if(osc_clk == S26M) - *sys_clkin_sel = 3; - else if(osc_clk == S19_2M) - *sys_clkin_sel = 2; - else if(osc_clk == S13M) - *sys_clkin_sel = 1; - else if(osc_clk == S12M) - *sys_clkin_sel = 0; -} - -static dpll_per_param *_get_per_dpll(int clk_index) -{ - dpll_per_param *ret = (dpll_per_param *)get_per_dpll_param(); - ret += clk_index; - return ret; -} - -static dpll_param *_get_mpu_dpll(int clk_index, int sil_index) -{ - dpll_param *ret = (dpll_param *)get_mpu_dpll_param(); - ret += (MAX_SIL_INDEX * clk_index) + sil_index; - return ret; -} - -#ifdef CONFIG_OMAP36XX - -#define PER_M_BITS 12 -#define PER_M2_BITS 5 -#define PER_M3_BITS 6 -#define PER_M4_BITS 6 -#define PER_M5_BITS 6 -#define PER_M6_BITS 6 - -static void per_dpll_init_36XX(int clk_index) -{ - dpll_per_param *per; - - per = _get_per_dpll(clk_index); - - sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); - wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); - - sr32(CM_CLKSEL2_PLL, 8, PER_M_BITS, per->m); - sr32(CM_CLKSEL2_PLL, 0, 7, per->n); - sr32(PRM_CLKSRC_CTRL, 8, 1, per->clkin); - sr32(CM_CLKSEL2_PLL, 24, 7, per->sd); - sr32(CM_CLKSEL2_PLL, 21, 3, per->dco); - sr32(CM_CLKSEL3_PLL, 0, PER_M2_BITS, per->m2); - sr32(CM_CLKSEL_DSS, 8, PER_M3_BITS, per->m3); - sr32(CM_CLKSEL_DSS, 0, PER_M4_BITS, per->m4); - sr32(CM_CLKSEL_CAM, 0, PER_M5_BITS, per->m5); - sr32(CM_CLKSEL1_EMU, 24, PER_M6_BITS, per->m6); - sr32(CM_CLKSEL_CORE, 12, 2, per->m2div); - - sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); -} - -static void mpu_dpll_init_36XX(int clk_index, int sil_index) -{ - dpll_param *mpu; - - mpu = _get_mpu_dpll(clk_index, sil_index); - - /* MPU DPLL (unlocked already) */ - sr32(CM_CLKSEL1_PLL_MPU, 8, 11, mpu->m); - sr32(CM_CLKSEL1_PLL_MPU, 0, 7, mpu->n); - sr32(CM_CLKSEL2_PLL_MPU, 0, 5, mpu->m2); - - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); -} - -#else /* 34xx */ - -#define PER_M_BITS 11 -#define PER_M2_BITS 5 -#define PER_M3_BITS 5 -#define PER_M4_BITS 5 -#define PER_M5_BITS 5 -#define PER_M6_BITS 5 - -static void per_dpll_init_34XX(int clk_index) -{ - dpll_per_param *dpll_param_p; - - /* Getting the base address to PER DPLL param table*/ - dpll_param_p = (dpll_param *)get_per_dpll_param(); - /* Moving it to the right sysclk base */ - dpll_param_p = dpll_param_p + clk_index; - /* PER DPLL */ - sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); - wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); - sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ - sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ - sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ - sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ - sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ - sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ - sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ - sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ - sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); -} - -static void mpu_dpll_init_34XX(int clk_index, int sil_index) -{ - dpll_param *dpll_param_p; - - /* Getting the base address to MPU DPLL param table*/ - dpll_param_p = (dpll_param *)get_mpu_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; - /* MPU DPLL (unlocked already) */ - sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ - sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ - sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ - sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); -} - -#endif - -/****************************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * -- called from SRAM, or Flash (using temp SRAM stack). - *****************************************************************************/ -void prcm_init(void) -{ - u32 osc_clk=0, sys_clkin_sel; - dpll_param *dpll_param_p; - u32 clk_index, sil_index; - - /* Gauge the input clock speed and find out the sys_clkin_sel - * value corresponding to the input clock. - */ - osc_clk = get_osc_clk_speed(); - get_sys_clkin_sel(osc_clk, &sys_clkin_sel); - - sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ - -/* Using 26MHz divider straight into OMAP saves ~2ms on OFF mode restore */ -#if 0 - /* If the input clock is greater than 19.2M always divide/2 */ - if(sys_clkin_sel > 2) { - sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ - clk_index = sys_clkin_sel/2; - } else -#endif - { - sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ - clk_index = sys_clkin_sel; - } - - sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ - - /* The DPLL tables are defined according to sysclk value and - * silicon revision. The clk_index value will be used to get - * the values for that input sysclk from the DPLL param table - * and sil_index will get the values for that SysClk for the - * appropriate silicon rev. - */ -#ifdef CONFIG_OMAP36XX - sil_index = 0; -#else - if(cpu_is_3410()) - sil_index = 2; - else { - if(get_cpu_rev() == CPU_3XX_ES10) - sil_index = 0; - else if(get_cpu_rev() >= CPU_3XX_ES20) - sil_index = 1; - } -#endif - - /* Unlock MPU DPLL (slows things down, and needed later) */ - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); - wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); - - /* Getting the base address of Core DPLL param table*/ - dpll_param_p = (dpll_param *)get_core_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; - /* CORE DPLL */ - /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ - sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); - wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); - /* For 3430 ES1.0 Errata 1.50, default value directly doesnt - work. write another value and then default value. */ - sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ - sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ - sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ - sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ - sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ - sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ - sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ - sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb ES1 only */ - sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ - sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ - sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ - sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ - sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); - - /* PER DPLL */ -#ifdef CONFIG_OMAP36XX - per_dpll_init_36XX(clk_index); - mpu_dpll_init_36XX(clk_index, sil_index); -#else - per_dpll_init_34XX(clk_index); - mpu_dpll_init_34XX(clk_index, sil_index); -#endif - - /* Set up GPTimers to sys_clk source only */ - sr32(CM_CLKSEL_PER, 0, 8, 0xff); - sr32(CM_CLKSEL_WKUP, 0, 1, 1); - - delay(5000); -} - -/***************************************** - * Routine: secure_unlock - * Description: Setup security registers for access - * (GP Device only) - *****************************************/ -void secure_unlock(void) -{ - /* Permission values for registers -Full fledged permissions to all */ - #define UNLOCK_1 0xFFFFFFFF - #define UNLOCK_2 0x00000000 - #define UNLOCK_3 0x0000FFFF - /* Protection Module Register Target APE (PM_RT)*/ - __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); - __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); - __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); - __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); - - __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); - - __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); - __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); - - __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ -} - -/********************************************************** - * Routine: try_unlock_sram() - * Description: If chip is GP type, unlock the SRAM for - * general use. - ***********************************************************/ -void try_unlock_memory(void) -{ - int mode; - - /* if GP device unlock device SRAM for general use */ - /* secure code breaks for Secure/Emulation device - HS/E/T*/ - mode = get_device_type(); - if (mode == GP_DEVICE) { - secure_unlock(); - } - return; -} - -/********************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called at time when only stack is available. - **********************************************************/ - -void s_init(void) -{ - watchdog_init(); -#ifdef CONFIG_3430_AS_3410 - /* setup the scalability control register for - * 3430 to work in 3410 mode - */ - __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); -#endif - try_unlock_memory(); - set_muxconf_regs(); - delay(100); - prcm_init(); - per_clocks_enable(); - config_3430sdram_ddr(); -} - -/******************************************************* - * Routine: misc_init_r - * Description: Init ethernet (done here so udelay works) - ********************************************************/ -int misc_init_r (void) -{ - return(0); -} - -/****************************************************** - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - ******************************************************/ -void wait_for_command_complete(unsigned int wd_base) -{ - int pending = 1; - do { - pending = __raw_readl(wd_base + WWPS); - } while (pending); -} - -/**************************************** - * Routine: watchdog_init - * Description: Shut down watch dogs - *****************************************/ -void watchdog_init(void) -{ - /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is - * either taken care of by ROM (HS/EMU) or not accessible (GP). - * We need to take care of WD2-MPU or take a PRCM reset. WD3 - * should not be running and does not generate a PRCM reset. - */ - sr32(CM_FCLKEN_WKUP, 5, 1, 1); - sr32(CM_ICLKEN_WKUP, 5, 1, 1); - wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ - - __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); - wait_for_command_complete(WD2_BASE); - __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); -} - -/********************************************** - * Routine: dram_init - * Description: sets uboots idea of sdram size - **********************************************/ -int dram_init (void) -{ - return 0; -} - -/***************************************************************** - * Routine: peripheral_enable - * Description: Enable the clks & power for perifs (GPT2, UART1,...) - ******************************************************************/ -void per_clocks_enable(void) -{ - /* Enable GP2 timer. */ - sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ - sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ - sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ - -#ifdef CFG_NS16550 -////#ifdef CONFIG_SERIAL3 - sr32(CM_FCLKEN_PER, 11, 1, 0x1); - sr32(CM_ICLKEN_PER, 11, 1, 0x1); -////#else - /* Enable UART1 clocks */ - sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); - sr32(CM_ICLKEN1_CORE, 13, 5, 0x1); -////#endif -#endif - // hns: enable clock for GPIO2-6 http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/p/65520/236545.aspx - sr32(CM_FCLKEN_PER, 13, 5, 0x1f); - sr32(CM_ICLKEN_PER, 13, 5, 0x1f); - // hns: and GPIO1 - sr32(CM_FCLKEN_WKUP, 3, 1, 0x1); - sr32(CM_ICLKEN_WKUP, 3, 1, 0x1); - delay(1000); -} - -/* Set MUX for UART, GPMC, SDRC, GPIO */ - -#define MUX_VAL(OFFSET,VALUE)\ - __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); - -#define CP(x) (CONTROL_PADCONF_##x) -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_DEFAULT()\ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4 lab*/\ - MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5 lab*/\ -MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/\ - MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_IO_DIR lab*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1 lab*/\ - MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ - MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ - MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ - MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ - MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ - MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ - MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ - MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ - MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ - MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ -MUX_VAL(CP(ETK_CTL), (IEN | PTU | DIS | M4)) /*GPIO_13*/\ - MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ - MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ - MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ - MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ - MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ - MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/\ -MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ -MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ - MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ - MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ -/********************************************************** - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers - * specific to the hardware. Many pins need - * to be moved from protect to primary mode. - *********************************************************/ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -#ifdef CONFIG_2GBDDR - MUX_VAL(CP(sdrc_cke1), (IDIS | PTU | EN | M0)) /*sdrc_cke1 */ -#endif -} - -/********************************************************** - * Routine: nand+_init - * Description: Set up nand for nand and jffs2 commands - *********************************************************/ -int nand_init(void) -{ - /* global settings */ - __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ - __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ - __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ -#ifdef CFG_NAND - __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ -#endif - - /* setup CS0 for Micron NAND, leave other CS's to u-boot */ - __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); - delay(1000); - -#ifdef CFG_NAND - __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); - -#elif CFG_ONENAND /* CFG_ONENAND */ - __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); -#endif - - /* Enable the GPMC Mapping */ - __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | - ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) | - (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); - delay(2000); - -#ifdef CFG_NAND - if (nand_chip()){ -#ifdef CFG_PRINTF - printf("Unsupported Chip!\n"); -#endif - return 1; - } -#elif CFG_ONENAND - if (onenand_chip()){ -#ifdef CFG_PRINTF - printf("OneNAND Unsupported !\n"); -#endif - return 1; - } -#endif - return 0; -} - -/* optionally do something like blinking LED */ -void board_hang (void) -{ - while (1) { - printf("X-Loader hangs\n"); - } -} diff --git a/uart-monitor/board/omap3430labrador/platform.S b/uart-monitor/board/omap3430labrador/platform.S deleted file mode 100644 index 42dfc72..0000000 --- a/uart-monitor/board/omap3430labrador/platform.S +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004-2006 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -_TEXT_BASE: - .word TEXT_BASE /* sdram load addr from config.mk */ - -#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) -/************************************************************************** - * cpy_clk_code: relocates clock code into SRAM where its safer to execute - * R1 = SRAM destination address. - *************************************************************************/ -.global cpy_clk_code - cpy_clk_code: - /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ -next2: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next2 - mov pc, lr /* back to caller */ - -/* **************************************************************************** - * NOTE: 3430 X-loader currently does not use this code. -* It could be removed its is kept for compatabily with u-boot. - * - * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed - * -executed from SRAM. - * R0 = CM_CLKEN_PLL-bypass value - * R1 = CM_CLKSEL1_PLL-m, n, and divider values - * R2 = CM_CLKSEL_CORE-divider values - * R3 = CM_IDLEST_CKGEN - addr dpll lock wait - * - * Note: If core unlocks/relocks and SDRAM is running fast already it gets - * confused. A reset of the controller gets it back. Taking away its - * L3 when its not in self refresh seems bad for it. Normally, this code - * runs from flash before SDR is init so that should be ok. - ******************************************************************************/ -.global go_to_speed - go_to_speed: - stmfd sp!, {r4-r6} - - /* move into fast relock bypass */ - ldr r4, pll_ctl_add - str r0, [r4] -wait1: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - beq wait1 /* if lock, loop */ - - /* set new dpll dividers _after_ in bypass */ - ldr r5, pll_div_add1 - str r1, [r5] /* set m, n, m2 */ - ldr r5, pll_div_add2 - str r2, [r5] /* set l3/l4/.. dividers*/ - ldr r5, pll_div_add3 /* wkup */ - ldr r2, pll_div_val3 /* rsm val */ - str r2, [r5] - ldr r5, pll_div_add4 /* gfx */ - ldr r2, pll_div_val4 - str r2, [r5] - ldr r5, pll_div_add5 /* emu */ - ldr r2, pll_div_val5 - str r2, [r5] - - /* now prepare GPMC (flash) for new dpll speed */ - /* flash needs to be stable when we jump back to it */ - ldr r5, flash_cfg3_addr - ldr r2, flash_cfg3_val - str r2, [r5] - ldr r5, flash_cfg4_addr - ldr r2, flash_cfg4_val - str r2, [r5] - ldr r5, flash_cfg5_addr - ldr r2, flash_cfg5_val - str r2, [r5] - ldr r5, flash_cfg1_addr - ldr r2, [r5] - orr r2, r2, #0x3 /* up gpmc divider */ - str r2, [r5] - - /* lock DPLL3 and wait a bit */ - orr r0, r0, #0x7 /* set up for lock mode */ - str r0, [r4] /* lock */ - nop /* ARM slow at this point working at sys_clk */ - nop - nop - nop -wait2: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - bne wait2 /* if lock, loop */ - nop - nop - nop - nop - ldmfd sp!, {r4-r6} - mov pc, lr /* back to caller, locked */ - -_go_to_speed: .word go_to_speed - -/* these constants need to be close for PIC code */ -/* The Nor has to be in the Flash Base CS0 for this condition to happen */ -flash_cfg1_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) -flash_cfg3_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) -flash_cfg3_val: - .word STNOR_GPMC_CONFIG3 -flash_cfg4_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) -flash_cfg4_val: - .word STNOR_GPMC_CONFIG4 -flash_cfg5_val: - .word STNOR_GPMC_CONFIG5 -flash_cfg5_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) -pll_ctl_add: - .word CM_CLKEN_PLL -pll_div_add1: - .word CM_CLKSEL1_PLL -pll_div_add2: - .word CM_CLKSEL_CORE -pll_div_add3: - .word CM_CLKSEL_WKUP -pll_div_val3: - .word (WKUP_RSM << 1) -pll_div_add4: - .word CM_CLKSEL_GFX -pll_div_val4: - .word (GFX_DIV << 0) -pll_div_add5: - .word CM_CLKSEL1_EMU -pll_div_val5: - .word CLSEL1_EMU_VAL - -#endif - -.globl lowlevel_init -lowlevel_init: - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -REG_CONTROL_STATUS: - .word CONTROL_STATUS -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK - -.globl get_mpu_dpll_param -get_mpu_dpll_param: - adr r0, mpu_dpll_param - mov pc, lr - -.globl get_iva_dpll_param -get_iva_dpll_param: - adr r0, iva_dpll_param - mov pc, lr - -.globl get_core_dpll_param -get_core_dpll_param: - adr r0, core_dpll_param - mov pc, lr - -.globl get_per_dpll_param -get_per_dpll_param: - adr r0, per_dpll_param - mov pc, lr - -#if defined(CONFIG_OMAP36XX) -#include -#elif defined(CONFIG_OMAP34XX) -#include -#else -#error "DPLL Table is undefined" -#endif \ No newline at end of file diff --git a/uart-monitor/common/Makefile b/uart-monitor/common/Makefile deleted file mode 100644 index de856cf..0000000 --- a/uart-monitor/common/Makefile +++ /dev/null @@ -1,48 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = libcommon.a - -AOBJS = - -COBJS = cmd_load.o - -OBJS = $(AOBJS) $(COBJS) - -CPPFLAGS += -I.. - -all: $(LIB) $(AOBJS) - -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-monitor/common/cmd_load.c b/uart-monitor/common/cmd_load.c deleted file mode 100644 index 0115b46..0000000 --- a/uart-monitor/common/cmd_load.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Serial up- and download support - */ -#include -#include - -#define putc serial_putc -#define tstc serial_tstc - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} -static inline void udelay(unsigned long us) -{ - delay(us * 200); /* approximate */ -} - -static gpio_t *blocks[]={ // GPIO1 .. 6 - OMAP34XX_GPIO1_BASE, - OMAP34XX_GPIO2_BASE, - OMAP34XX_GPIO3_BASE, - OMAP34XX_GPIO4_BASE, - OMAP34XX_GPIO5_BASE, - OMAP34XX_GPIO6_BASE -}; - -static inline int gpio_get(int n) -{ - int bit=n % 32; - gpio_t *base=blocks[n/32]; - return (base->datain >> bit)&1; -} - -static inline int gpio_is_input(int n) -{ // geht nicht richtig - int bit=n % 32; - gpio_t *base=blocks[n/32]; - return (base->oe >> bit)&1; -} - -#ifdef CFG_CMD_FAT -extern void * memcpy(void * dest,const void *src,size_t count); -#else -void * memcpy(void * dest,const void *src,size_t count) -{ - char *tmp = (char *) dest, *s = (char *) src; - - while (count--) - *tmp++ = *s++; - - return dest; -} -#endif - - -int strcmp(char *s1, char *s2) -{ - while(*s1 == *s2) { - if(*s1 == 0) - return 0; // same - s1++; - s2++; - } - return *s1 > *s2?1:-1; -} - -long xtol(char *s) -{ - long val=0; - while(1) - { - if(*s >= '0' && *s <= '9') - val=16*val+(*s++-'0'); - else if(*s >= 'A' && *s <= 'F') - val=16*val+(*s++-'A'+10); - else if(*s >= 'a' && *s <= 'f') - val=16*val+(*s++-'a'+10); - else - break; - } - return val; -} - -static char *addr=(char *) CFG_LOADADDR; -static char line[100]; -static char *argv[10]; - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) - -#define MUX_VAL(OFFSET,VALUE)\ -__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); - -#define CP(x) (CONTROL_PADCONF_##x) - -void testfn(void) -{ // code can be copied to SDRAM (assuming that it is position-independent!) - int i; - for(i=0; i<10; i++) { - if(i & 1) - MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/ - else - MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/ - udelay(500*1000); - } -} - -int do_load_serial_bin (ulong offset, int baudrate) -{ // add testing code here - int i=0; - while(0) - { - printf("hello world\n"); - // testfn(); - } - while(1) { - char *c; - int argc=0; - int pos=0; - printf ("$ "); - while(1) { - line[pos]=getc(); - switch(line[pos]) { - case '\b': - case 0x7f: - if(pos > 0) { - putc('\b'); - pos--; - } - continue; - case 0: - case '\n': - continue; // ignore - case '\r': - break; // command - default: - if(pos < sizeof(line)/sizeof(line[0])) { - putc(line[pos]); - pos++; - } - continue; - } - line[pos]=0; - printf("\n"); - break; - } - c=line; - while(argc < sizeof(argv)/sizeof(argv[0])) { - while (*c == ' ' || *c == '\t') - c++; - if(*c == 0) - break; - argv[argc]=c; - while(*c != 0 && *c != '\t' && *c != ' ') - c++; - argc++; - if(*c == 0) - break; - *c=0; // substitute - c++; - } - if(argc == 0) - continue; // empty line -// printf("argc=%d argv[0]=%s\n", argc, argv[0]); - if(strcmp(argv[0], "c") == 0) { // c - copy test function to SDRAM and execute - void (*fn)(void) = &testfn; - size_t cnt = 0x1000; - addr=(char *) CFG_LOADADDR; - printf("%08x (%d) --> %08x\n", fn, cnt, addr); - memcpy(addr, fn, cnt); - (*fn)(); - } - else if(strcmp(argv[0], "x") == 0) { // x [addr] - execute code - void (*fn)(void) = addr; - if(argc > 1) - fn = (void *) xtol(argv[1]); - (*fn)(); - } - else if(strcmp(argv[0], "l") == 0) { // l - loop - int d=1; - while(1) - printf ("Welcome to uart-monitor (%d)\n", d++), udelay(500*1000); - } - else if(strcmp(argv[0], "ram") == 0) { - int val=0x55; - if(argc == 2) - val=xtol(argv[1]); - for(addr=(char *) CFG_LOADADDR; addr < 256+(char *) CFG_LOADADDR; addr++) { - *addr=val++; - } - addr=(char *) CFG_LOADADDR; - } - else if(strcmp(argv[0], "a") == 0) { // a [addr] - if(argc > 1) - addr=(char *) xtol(argv[1]); - printf("%08x\n", addr); - } - else if(strcmp(argv[0], "r") == 0) { // r [size] - int i; - int n=1; - if(argc > 1) - n=xtol(argv[1]); - printf("%08x:", addr); - for(i=0; i 1) - n=xtol(argv[1]); - printf("%08x:", addr); - for(i=0; i 1) - val=xtol(argv[1]); - if(argc > 2) - n=xtol(argv[2]); - for(i=0; i datain); - printf("%03d:", 0); - for(i=0; i>= 16; - } - if(addr == 0x48002264) { - addr=0x480025DC; - printf("\n%08x", addr); - cols=0; - } - else { - addr+=4; - if(++cols == 8) - printf("\n%08x", addr), cols=0; - } - } - printf("\n"); - } - else - printf("uart-monitor unknown command: %s\n", argv[0]); - } - return 0; -} - diff --git a/uart-monitor/config.mk b/uart-monitor/config.mk deleted file mode 100644 index 1365b9d..0000000 --- a/uart-monitor/config.mk +++ /dev/null @@ -1,175 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -######################################################################### - -# clean the slate ... -PLATFORM_RELFLAGS = -PLATFORM_CPPFLAGS = -PLATFORM_LDFLAGS = - -# -# When cross-compiling on NetBSD, we have to define __PPC__ or else we -# will pick up a va_list declaration that is incompatible with the -# actual argument lists emitted by the compiler. -# -# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3] - -ifeq ($(ARCH),ppc) -ifeq ($(CROSS_COMPILE),powerpc-netbsd-) -PLATFORM_CPPFLAGS+= -D__PPC__ -endif -ifeq ($(CROSS_COMPILE),powerpc-openbsd-) -PLATFORM_CPPFLAGS+= -D__PPC__ -endif -endif - -ifeq ($(ARCH),arm) -ifeq ($(CROSS_COMPILE),powerpc-netbsd-) -PLATFORM_CPPFLAGS+= -D__ARM__ -endif -ifeq ($(CROSS_COMPILE),powerpc-openbsd-) -PLATFORM_CPPFLAGS+= -D__ARM__ -endif -endif - -ifdef ARCH -sinclude $(TOPDIR)/$(ARCH)_config.mk # include architecture dependend rules -endif -ifdef CPU -sinclude $(TOPDIR)/cpu/$(CPU)/config.mk # include CPU specific rules -endif -ifdef VENDOR -BOARDDIR = $(VENDOR)/$(BOARD) -else -BOARDDIR = $(BOARD) -endif -ifdef BOARD -sinclude $(TOPDIR)/board/$(BOARDDIR)/config.mk # include board specific rules -endif - -######################################################################### - -CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ - else if [ -x /bin/bash ]; then echo /bin/bash; \ - else echo sh; fi ; fi) - -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) -HOSTCC = cc -else -HOSTCC = gcc -endif -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -HOSTSTRIP = strip - -######################################################################### -# -# Option checker (courtesy linux kernel) to ensure -# only supported compiler options are used -# -cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ - > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) - -# -# Include the make variables (CC, etc...) -# -AS = $(CROSS_COMPILE)as -LD = $(CROSS_COMPILE)ld -CC = $(CROSS_COMPILE)gcc -CPP = $(CC) -E -AR = $(CROSS_COMPILE)ar -NM = $(CROSS_COMPILE)nm -STRIP = $(CROSS_COMPILE)strip -OBJCOPY = $(CROSS_COMPILE)objcopy -OBJDUMP = $(CROSS_COMPILE)objdump -RANLIB = $(CROSS_COMPILE)RANLIB - -RELFLAGS= $(PLATFORM_RELFLAGS) -DBGFLAGS= -g # -DDEBUG -OPTFLAGS= -Os #-fomit-frame-pointer -ifndef LDSCRIPT -#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds.debug -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds -endif -OBJCFLAGS += --gap-fill=0xff - -gccincdir := $(shell $(CC) -print-file-name=include) - -CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \ - -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \ - -I$(TOPDIR)/include \ - -fno-builtin -ffreestanding -nostdinc -isystem \ - $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) - -ifdef BUILD_TAG -CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \ - -DBUILD_TAG='"$(BUILD_TAG)"' -else -CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -endif - -AFLAGS_DEBUG := -Wa,-gstabs -AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS) - -LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) - -# Location of a usable BFD library, where we define "usable" as -# "built for ${HOST}, supports ${TARGET}". Sensible values are -# - When cross-compiling: the root of the cross-environment -# - Linux/ppc (native): /usr -# - NetBSD/ppc (native): you lose ... (must extract these from the -# binutils build directory, plus the native and U-Boot include -# files don't like each other) -# -# So far, this is used only by tools/gdb/Makefile. - -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) -BFD_ROOT_DIR = /usr/local/tools -else -ifeq ($(HOSTARCH),$(ARCH)) -# native -BFD_ROOT_DIR = /usr -else -#BFD_ROOT_DIR = /LinuxPPC/CDK # Linux/i386 -#BFD_ROOT_DIR = /usr/pkg/cross # NetBSD/i386 -BFD_ROOT_DIR = /opt/powerpc -endif -endif - -######################################################################### - -export CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \ - AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP \ - MAKE -export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS - -######################################################################### - -%.s: %.S - $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$< -%.o: %.S - $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$< -%.o: %.c - $(CC) $(CFLAGS) -c -o $@ $< - -######################################################################### diff --git a/uart-monitor/cpu/omap3/Makefile b/uart-monitor/cpu/omap3/Makefile deleted file mode 100644 index fca0dad..0000000 --- a/uart-monitor/cpu/omap3/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = lib$(CPU).a - -START = start.o -OBJS = cpu.o mmc.o sys_info.o - -all: .depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-monitor/cpu/omap3/config.mk b/uart-monitor/cpu/omap3/config.mk deleted file mode 100644 index 71547f3..0000000 --- a/uart-monitor/cpu/omap3/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 - -# PLATFORM_CPPFLAGS += -march=armv7-a -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) -PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/uart-monitor/cpu/omap3/cpu.c b/uart-monitor/cpu/omap3/cpu.c deleted file mode 100644 index 1cf422a..0000000 --- a/uart-monitor/cpu/omap3/cpu.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2004-2006 Texas Insturments - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * CPU specific code - */ -#include - -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ -#define C1_WB (1<<3) /* merging write buffer on/off */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - -int cpu_init (void) -{ - return 0; -} - diff --git a/uart-monitor/cpu/omap3/mmc.c b/uart-monitor/cpu/omap3/mmc.c deleted file mode 120000 index ca45f14..0000000 --- a/uart-monitor/cpu/omap3/mmc.c +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/cpu/omap3/mmc.c \ No newline at end of file diff --git a/uart-monitor/cpu/omap3/mmc_host_def.h b/uart-monitor/cpu/omap3/mmc_host_def.h deleted file mode 120000 index d40a0a1..0000000 --- a/uart-monitor/cpu/omap3/mmc_host_def.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/cpu/omap3/mmc_host_def.h \ No newline at end of file diff --git a/uart-monitor/cpu/omap3/mmc_protocol.h b/uart-monitor/cpu/omap3/mmc_protocol.h deleted file mode 120000 index f79c007..0000000 --- a/uart-monitor/cpu/omap3/mmc_protocol.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/cpu/omap3/mmc_protocol.h \ No newline at end of file diff --git a/uart-monitor/cpu/omap3/start.S b/uart-monitor/cpu/omap3/start.S deleted file mode 100644 index 142c425..0000000 --- a/uart-monitor/cpu/omap3/start.S +++ /dev/null @@ -1,230 +0,0 @@ -/* - * armboot - Startup Code for OMP2420/ARM1136 CPU-core - * - * Copyright (c) 2004-2006 Texas Instruments - * - * Copyright (c) 2001 Marius Gröger - * Copyright (c) 2002 Alex Züpke - * Copyright (c) 2002 Gary Jennejohn - * Copyright (c) 2003 Richard Woodruff - * Copyright (c) 2003 Kshitij - * Copyright (c) 2004 Jian Zhang - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -.globl _start -_start: - b reset - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - -_hang: - .word do_hang - - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 /* now 16*4=64 */ - -.global _end_vect -_end_vect: - - .balignl 16,0xdeadbeef -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack - * - ************************************************************************* - */ - -_TEXT_BASE: - .word TEXT_BASE - -.globl _armboot_start -_armboot_start: - .word _start - -/* - * These are defined in the board-specific linker script. - */ -.globl _bss_start -_bss_start: - .word __bss_start - -.globl _bss_end -_bss_end: - .word _end - -/* - * the actual reset code - */ - -reset: - ldr r4, scratchpad /* r4 <- scratchpad reg address */ - ldr r5, [r0, #0x4] /* r5 <- value of boot device */ - str r5, [r4] /* store r5 in scratchpad reg */ - - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - - bl cpy_clk_code /* put dpll adjust code behind vectors */ - - /* the mask ROM code should have PLL and others stable */ - bl cpu_init_crit - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* no need to relocate if XIP */ - beq stack_setup /* skip txt cpy if XIP(SRAM, SDRAM) */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub sp, r0, #128 /* leave 32 words for abort-stack */ - and sp, sp, #~7 /* 8 byte alinged for (ldr/str)d */ - - /* Clear BSS (if any). Is below tx (watch load addr - need space) */ -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear value */ -clbss_l: - str r2, [r0] /* clear BSS location */ - cmp r0, r1 /* are we at the end yet */ - add r0, r0, #4 /* increment clear index pointer */ - bne clbss_l /* keep clearing till at end */ - - ldr pc, _start_armboot /* jump to C code */ - -_start_armboot: .word start_armboot - - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ -cpu_init_crit: - /* - * Invalidate L1 I/D - */ - mov r0, #0 /* set up for MCR */ - mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr p15, 0, r0, c7, c5, 1 /* invalidate icache */ - - /* Invalide L2 cache (gp device call point) - * - warning, this may have issues on EMU/HS devices - * this call can corrupt r0-r5 - */ - mov r12, #0x1 @ set up to invalide L2 -smi: .word 0xE1600070 @ Call SMI monitor - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002000 @ clear bits 13 (--V-) - bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) - orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align -#ifndef CONFIG_ICACHE_OFF - orr r0, r0, #0x00001800 @ set bit 11,12 (---I Z---) BTB,I-Cache -#endif - mcr p15, 0, r0, c1, c0, 0 - - /* - * Jump to board specific initialization... The Mask ROM will have already initialized - * basic memory. Go here to bump up clock rate and handle wake up conditions. - */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* pass on info about skipping some init portions */ - moveq r0,#0x1 /* flag to skip prcm and sdrc setup */ - movne r0,#0x0 - - mov ip, lr /* persevere link reg across call */ - bl lowlevel_init /* go setup pll,mux,memory */ - mov lr, ip /* restore link */ - mov pc, lr /* back to my caller */ - -/* - * exception handler - */ - .align 5 -do_hang: - ldr sp, _TEXT_BASE /* use 32 words abort stack */ - bl hang /* hang and never return */ - -scratchpad: - .word 0x480029c0 diff --git a/uart-monitor/cpu/omap3/sys_info.c b/uart-monitor/cpu/omap3/sys_info.c deleted file mode 100644 index 9a14d0e..0000000 --- a/uart-monitor/cpu/omap3/sys_info.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (c) 2009 Wind River Systems, Inc. - * Tom Rix - * - * Derived from board specific omap code by - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - -/* - * get_cpu_rev(void) - extract version info - */ -u32 get_cpu_rev(void) -{ - u32 cpuid = 0; - ctrl_id_t *id_base; - /* - * On ES1.0 the IDCODE register is not exposed on L4 - * so using CPU ID to differentiate between ES1.0 and > ES1.0. - */ - __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); - if ((cpuid & 0xf) == 0x0) - return CPU_3XX_ES10; - else { - /* Decode the IDs on > ES1.0 */ - id_base = (ctrl_id_t *) OMAP34XX_ID_L4_IO_BASE; - - cpuid = (__raw_readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf; - - /* Some early ES2.0 seem to report ID 0, fix this */ - if (cpuid == 0) - cpuid = CPU_3XX_ES20; - - return cpuid; - } -} - -/* - * cpu_is_3410(void) - returns true for 3410 - */ -u32 cpu_is_3410(void) -{ - int status; - if(get_cpu_rev() < CPU_3XX_ES20) { - return 0; - } else { - /* read scalability status and return 1 for 3410*/ - status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); - /* Check whether MPU frequency is set to 266 MHz which - * is nominal for 3410. If yes return true else false - */ - if (((status >> 8) & 0x3) == 0x2) - return 1; - else - return 0; - } -} - diff --git a/uart-monitor/disk/Makefile b/uart-monitor/disk/Makefile deleted file mode 100644 index 7da4624..0000000 --- a/uart-monitor/disk/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -#CFLAGS += -DET_DEBUG -DDEBUG - -LIB = libdisk.a - -OBJS = part.o - -all: $(LIB) - -$(LIB): $(START) $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-monitor/disk/part.c b/uart-monitor/disk/part.c deleted file mode 100644 index a367f13..0000000 --- a/uart-monitor/disk/part.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#undef PART_DEBUG - -#ifdef PART_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ - (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - -/* ------------------------------------------------------------------------- */ -/* - * reports device info to the user - */ -void dev_print (block_dev_desc_t *dev_desc) -{ -#ifdef CONFIG_LBA48 - uint64_t lba512; /* number of blocks if 512bytes block size */ -#else - lbaint_t lba512; -#endif - - if (dev_desc->type==DEV_TYPE_UNKNOWN) { - return; - } - if (dev_desc->if_type==IF_TYPE_SCSI) { - printf ("(%d:%d) ", dev_desc->target,dev_desc->lun); - } - if (dev_desc->if_type==IF_TYPE_IDE) { - printf ("Model: %s Firm: %s Ser#: %s\n", - dev_desc->vendor, - dev_desc->revision, - dev_desc->product); - } else { - printf ("Vendor: %s Prod.: %s Rev: %s\n", - dev_desc->vendor, - dev_desc->product, - dev_desc->revision); - } - printf (" Type: "); - switch (dev_desc->type & 0x1F) { - case DEV_TYPE_HARDDISK: printf ("Hard Disk"); - break; - case DEV_TYPE_CDROM: printf ("CD ROM"); - break; - case DEV_TYPE_OPDISK: printf ("Optical Device"); - break; - case DEV_TYPE_TAPE: printf ("Tape"); - break; - default: printf ("# %02X #", dev_desc->type & 0x1F); - break; - } - if ((dev_desc->lba * dev_desc->blksz)>0L) { - ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem; - lbaint_t lba; - - lba = dev_desc->lba; - - lba512 = (lba * (dev_desc->blksz/512)); - mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */ - /* round to 1 digit */ - mb_quot = mb / 10; - mb_rem = mb - (10 * mb_quot); - - gb = mb / 1024; - gb_quot = gb / 10; - gb_rem = gb - (10 * gb_quot); -#ifdef CONFIG_LBA48 - if (dev_desc->lba48) - printf (" Supports 48-bit addressing\n"); -#endif -#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF) - printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n", - mb_quot, mb_rem, - gb_quot, gb_rem, - lba, - dev_desc->blksz); -#else - printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n", - mb_quot, mb_rem, - gb_quot, gb_rem, - (ulong)lba, - dev_desc->blksz); -#endif - } else { - printf (" Capacity: not available\n"); - } -} -#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */ - -#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ - (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || \ - (CONFIG_COMMANDS & CFG_CMD_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - -#if defined(CONFIG_MAC_PARTITION) || \ - defined(CONFIG_DOS_PARTITION) || \ - defined(CONFIG_ISO_PARTITION) || \ - defined(CONFIG_AMIGA_PARTITION) - -void init_part (block_dev_desc_t * dev_desc) -{ -#ifdef CONFIG_ISO_PARTITION - if (test_part_iso(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_ISO; - return; - } -#endif - -#ifdef CONFIG_MAC_PARTITION - if (test_part_mac(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_MAC; - return; - } -#endif - -#ifdef CONFIG_DOS_PARTITION - if (test_part_dos(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_DOS; - return; - } -#endif - -#ifdef CONFIG_AMIGA_PARTITION - if (test_part_amiga(dev_desc) == 0) { - dev_desc->part_type = PART_TYPE_AMIGA; - return; - } -#endif -} - - -int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info) -{ - switch (dev_desc->part_type) { -#ifdef CONFIG_MAC_PARTITION - case PART_TYPE_MAC: - if (get_partition_info_mac(dev_desc,part,info) == 0) { - PRINTF ("## Valid MAC partition found ##\n"); - return (0); - } - break; -#endif - -#ifdef CONFIG_DOS_PARTITION - case PART_TYPE_DOS: - if (get_partition_info_dos(dev_desc,part,info) == 0) { - PRINTF ("## Valid DOS partition found ##\n"); - return (0); - } - break; -#endif - -#ifdef CONFIG_ISO_PARTITION - case PART_TYPE_ISO: - if (get_partition_info_iso(dev_desc,part,info) == 0) { - PRINTF ("## Valid ISO boot partition found ##\n"); - return (0); - } - break; -#endif - -#ifdef CONFIG_AMIGA_PARTITION - case PART_TYPE_AMIGA: - if (get_partition_info_amiga(dev_desc, part, info) == 0) - { - PRINTF ("## Valid Amiga partition found ##\n"); - return (0); - } - break; -#endif - default: - break; - } - return (-1); -} - -static void print_part_header (const char *type, block_dev_desc_t * dev_desc) -{ - switch (dev_desc->if_type) { - case IF_TYPE_IDE: printf ("IDE"); - break; - case IF_TYPE_SCSI: printf ("SCSI"); - break; - case IF_TYPE_ATAPI: printf ("ATAPI"); - break; - case IF_TYPE_USB: printf ("USB"); - break; - case IF_TYPE_DOC: printf ("DOC"); - break; - default: printf ("UNKNOWN"); - break; - } - printf (" device %d -- Partition Type: %s\n\n", - dev_desc->dev, type); -} - -void print_part (block_dev_desc_t * dev_desc) -{ - - switch (dev_desc->part_type) { -#ifdef CONFIG_MAC_PARTITION - case PART_TYPE_MAC: - PRINTF ("## Testing for valid MAC partition ##\n"); - print_part_header ("MAC", dev_desc); - print_part_mac (dev_desc); - return; -#endif -#ifdef CONFIG_DOS_PARTITION - case PART_TYPE_DOS: - PRINTF ("## Testing for valid DOS partition ##\n"); - print_part_header ("DOS", dev_desc); - print_part_dos (dev_desc); - return; -#endif - -#ifdef CONFIG_ISO_PARTITION - case PART_TYPE_ISO: - PRINTF ("## Testing for valid ISO Boot partition ##\n"); - print_part_header ("ISO", dev_desc); - print_part_iso (dev_desc); - return; -#endif - -#ifdef CONFIG_AMIGA_PARTITION - case PART_TYPE_AMIGA: - PRINTF ("## Testing for a valid Amiga partition ##\n"); - print_part_header ("AMIGA", dev_desc); - print_part_amiga (dev_desc); - return; -#endif - } -} - - -#else /* neither MAC nor DOS nor ISO partition configured */ -# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured! -#endif - -#endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */ diff --git a/uart-monitor/drivers/Makefile b/uart-monitor/drivers/Makefile deleted file mode 100644 index ffc38b3..0000000 --- a/uart-monitor/drivers/Makefile +++ /dev/null @@ -1,70 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -# CFLAGS += -DET_DEBUG -DDEBUG - -LIB = libdrivers.a -OBJS = serial.o ns16550.o onenand.o - -ifeq ($(BOARD), omap3430sdp) -OBJS += k9f1g08r0a.o -endif - -ifeq ($(BOARD), omap3430labrador) -OBJS += k9f1g08r0a.o -endif - -ifeq ($(BOARD), omap2420h4) -OBJS += k9k1216.o -endif - -ifeq ($(BOARD), omap2430sdp) -OBJS += k9k1216.o -endif - -ifeq ($(BOARD), omap1710h3) -OBJS += k9f5616.o -endif - - -## Disabled for now: -## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \ -## lan91c96.o mw_eeprom.o natsemi.o \ -## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \ -## - -all: $(LIB) - -$(LIB): $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-monitor/drivers/k9f1g08r0a.c b/uart-monitor/drivers/k9f1g08r0a.c deleted file mode 100644 index f0d6452..0000000 --- a/uart-monitor/drivers/k9f1g08r0a.c +++ /dev/null @@ -1,512 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * Jian Zhang - * - * Samsung K9F1G08R0AQ0C NAND chip driver for an OMAP2420 board - * - * This file is based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#include -#include - -#ifdef CFG_NAND_K9F1G08R0A - -#define K9F1G08R0A_MFR 0xec /* Samsung */ -#define K9F1G08R0A_ID 0xa1 /* part # */ - -/* Since Micron and Samsung parts are similar in geometry and bus width - * we can use the same driver. Need to revisit to make this file independent - * of part/manufacturer - */ -#define MT29F1G_MFR 0x2c /* Micron */ -#define MT29F1G_ID 0xa1 /* x8, 1GiB */ -#define MT29F2G_ID 0xba /* x16, 2GiB */ -#define MT29F4G_ID 0xbc /* x16, 4GiB */ - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE (ADDR_COLUMN | ADDR_PAGE) - -#define ADDR_OOB (0x4 | ADDR_COLUMN_PAGE) - -#define PAGE_SIZE 2048 -#define OOB_SIZE 64 -#define MAX_NUM_PAGES 64 - -#ifdef NAND_HW_ROMCODE_ECC_LAYOUT -#define __raw_ecc_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_ecc_writel(v, a) (*(volatile unsigned int *)(a) = (v)) -/* Register definitions */ -#define GPMC_BASE_ADDR OMAP34XX_GPMC_BASE - -#define ECCCLEAR (0x1 << 8) -#define ECCRESULTREG1 (0x1 << 0) -#define ECCSIZE512BYTE 0xFF -#define ECCSIZE1 (ECCSIZE512BYTE << 22) -#define ECCSIZE0 (ECCSIZE512BYTE << 12) -#define ECCSIZE0SEL (0x000 << 0) - -#define ECC_BLOCK_SIZE 512 -#ifdef NAND_16BIT -#define DEV_WIDTH 1 -static u_char ecc_pos[] = { 2, 3, 4, 5, 6, 7, 8, 9, - 10, 11, 12, 13 -}; -#else -#define DEV_WIDTH 0 -static u_char ecc_pos[] = { 1, 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12 -}; -#endif - -#else -#ifdef NAND_16BIT -#define DEV_WIDTH 1 -#else -#define DEV_WIDTH 0 -#endif - -#ifdef CFG_SW_ECC_512 -#define ECC_BLOCK_SIZE 512 -#else -#define ECC_BLOCK_SIZE 256 -#endif -/* JFFS2 large page layout for 3-byte ECC per 256 bytes ECC layout */ -/* This is the only SW ECC supported by u-boot. So to load u-boot - * this should be supported */ -static u_char ecc_pos[] = {40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}; - -#endif - -#define ECC_SIZE (sizeof(ecc_pos)) -#define ECC_STEPS 3 -#define ECC_CHECK_ENABLE - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %0, #1\n" - "bne 1b" : "=r" (loops) : "0" (loops)); -} - -static int nand_read_page(u_char *buf, ulong page_addr); -static int nand_read_oob(u_char *buf, ulong page_addr); - -static unsigned long chipsize = (256 << 20); - -/* NanD_Command: Send a flash command to the flash chip */ -static int NanD_Command(unsigned char command) -{ - NAND_CTL_SETCLE(NAND_ADDR); - - WRITE_NAND_COMMAND(command, NAND_ADDR); - NAND_CTL_CLRCLE(NAND_ADDR); - - if (command == NAND_CMD_RESET) { - unsigned char ret_val; - NanD_Command(NAND_CMD_STATUS); - do { - ret_val = READ_NAND(NAND_ADDR); /* wait till ready */ - } while ((ret_val & 0x40) != 0x40); - } - - NAND_WAIT_READY(); - return 0; -} - - -/* NanD_Address: Set the current address for the flash chip */ -static int NanD_Address(unsigned int numbytes, unsigned long ofs) -{ - uchar u; - - NAND_CTL_SETALE(NAND_ADDR); - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE - || numbytes == ADDR_OOB) - { - ushort col = ofs; - - u = col & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - - u = (col >> 8) & 0x07; - if (numbytes == ADDR_OOB) - u = u | ((DEV_WIDTH == 1) ? (1 << 2) : (1 << 3)); - WRITE_NAND_ADDRESS(u, NAND_ADDR); - } - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE - || numbytes == ADDR_OOB) - { - u = (ofs >> 11) & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - u = (ofs >> 19) & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - - /* One more address cycle for devices > 128MiB */ - if (chipsize > (128 << 20)) { - u = (ofs >> 27) & 0xff; - WRITE_NAND_ADDRESS(u, NAND_ADDR); - } - } - - NAND_CTL_CLRALE(NAND_ADDR); - - NAND_WAIT_READY(); - return 0; -} - -/* read chip mfr and id - * return 0 if they match board config - * return 1 if not - */ -int nand_chip() -{ - int mfr, id; - - NAND_ENABLE_CE(); - - if (NanD_Command(NAND_CMD_RESET)) { - printf("Err: RESET\n"); - NAND_DISABLE_CE(); - return 1; - } - - if (NanD_Command(NAND_CMD_READID)) { - printf("Err: READID\n"); - NAND_DISABLE_CE(); - return 1; - } - - NanD_Address(ADDR_COLUMN, 0); - - mfr = READ_NAND(NAND_ADDR); - id = READ_NAND(NAND_ADDR); - - NAND_DISABLE_CE(); - - /* Check Micron part or Samsung part */ - if ((mfr == MT29F1G_MFR && (id == MT29F1G_ID || - id == MT29F2G_ID || id == MT29F4G_ID)) || - (mfr == K9F1G08R0A_MFR && (id == K9F1G08R0A_ID))) - return 0; - - return 1; -} - -/* read a block data to buf - * return 1 if the block is bad or ECC error can't be corrected for any page - * return 0 on sucess - */ -int nand_read_block(unsigned char *buf, ulong block_addr) -{ - int i, offset = 0; - -#ifdef ECC_CHECK_ENABLE - u8 oob_buf[OOB_SIZE]; - - /* check bad block */ - /* 0th word in spare area needs be 0xff */ - if (nand_read_oob(oob_buf, block_addr) || (oob_buf[0] & 0xff) != 0xff) { - printf("Skipped bad block at 0x%x\n", block_addr); - return 1; /* skip bad block */ - } -#endif - /* read the block page by page*/ - for (i = 0; i < MAX_NUM_PAGES; i++) { - if (nand_read_page(buf + offset, block_addr + offset)) - return 1; - offset += PAGE_SIZE; - } - - return 0; -} - -#ifdef NAND_HW_ROMCODE_ECC_LAYOUT -/* - * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in - * GPMC controller - * - */ -static void omap_hwecc_init(void) -{ - /* - * Init ECC Control Register - * Clear all ECC | Enable Reg1 - */ - __raw_ecc_writel(ECCCLEAR | ECCRESULTREG1, - GPMC_BASE_ADDR + GPMC_ECC_CONTROL); - __raw_ecc_writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, - GPMC_BASE_ADDR + GPMC_ECC_SIZE_CONFIG); - __raw_ecc_writel(0x1 | (0 << 1) | (DEV_WIDTH << 7), - GPMC_BASE_ADDR + GPMC_ECC_CONFIG); -} - -/* - * gen_true_ecc - This function will generate true ECC value, which - * can be used when correcting data read from NAND flash memory core - * - * @ecc_buf: buffer to store ecc code - * - * @return: re-formatted ECC value - */ -static uint32_t gen_true_ecc(uint8_t *ecc_buf) -{ - return ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xF0) << 20) | - ((ecc_buf[2] & 0x0F) << 8); -} - -/* - * omap_calculate_ecc - Generate non-inverted ECC bytes. - * - * Using noninverted ECC can be considered ugly since writing a blank - * page ie. padding will clear the ECC bytes. This is no problem as - * long nobody is trying to write data on the seemingly unused page. - * Reading an erased page will produce an ECC mismatch between - * generated and read ECC bytes that has to be dealt with separately. - * E.g. if page is 0xFF (fresh erased), and if HW ECC engine within GPMC - * is used, the result of read will be 0x0 while the ECC offsets of the - * spare area will be 0xFF which will result in an ECC mismatch. - * @dat: unused - * @ecc_code: ecc_code buffer - */ -static int omap_calculate_ecc(const uint8_t *dat, uint8_t *ecc_code) -{ - u_int32_t val; - - /* Start Reading from HW ECC1_Result = 0x200 */ - val = __raw_ecc_readl(GPMC_BASE_ADDR + GPMC_ECC1_RESULT); - - ecc_code[0] = val & 0xFF; - ecc_code[1] = (val >> 16) & 0xFF; - ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0); - - /* - * Stop reading anymore ECC vals and clear old results - * enable will be called if more reads are required - */ - __raw_ecc_writel(0x000, GPMC_BASE_ADDR + GPMC_ECC_CONFIG); - - return 0; -} - -static int hweight32(unsigned int val) -{ - u_char count = 0; - for ( ; val; count++) - val &= (val - 1); - return count; -} - -/* - * omap_correct_data - Compares the ecc read from nand spare area with ECC - * registers values and corrects one bit error if it has occured - * Further details can be had from OMAP TRM and the following selected links: - * http://en.wikipedia.org/wiki/Hamming_code - * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf - * - * @dat: page data - * @read_ecc: ecc read from nand flash - * @calc_ecc: ecc read from ECC registers - * - * @return 0 if data is OK or corrected, else returns -1 - */ -static int omap_correct_data(uint8_t *dat, - uint8_t *read_ecc, uint8_t *calc_ecc) -{ - uint32_t orig_ecc, new_ecc, res, hm; - uint16_t parity_bits, byte; - uint8_t bit; - - /* Regenerate the orginal ECC */ - orig_ecc = gen_true_ecc(read_ecc); - new_ecc = gen_true_ecc(calc_ecc); - /* Get the XOR of real ecc */ - res = orig_ecc ^ new_ecc; - if (res) { - /* Get the hamming width */ - hm = hweight32(res); - /* Single bit errors can be corrected! */ - if (hm == 12) { - /* Correctable data! */ - parity_bits = res >> 16; - bit = (parity_bits & 0x7); - byte = (parity_bits >> 3) & 0x1FF; - /* Flip the bit to correct */ - dat[byte] ^= (0x1 << bit); - } else if (hm == 1) { - printf("Error: Ecc is wrong\n"); - /* ECC itself is corrupted */ - return 2; - } else { - /* - * hm distance != parity pairs OR one, could mean 2 bit - * error OR potentially be on a blank page.. - * orig_ecc: contains spare area data from nand flash. - * new_ecc: generated ecc while reading data area. - * Note: if the ecc = 0, all data bits from which it was - * generated are 0xFF. - * The 3 byte(24 bits) ecc is generated per 512byte - * chunk of a page. If orig_ecc(from spare area) - * is 0xFF && new_ecc(computed now from data area)=0x0, - * this means that data area is 0xFF and spare area is - * 0xFF. A sure sign of a erased page! - */ - if ((orig_ecc == 0x0FFF0FFF) && (new_ecc == 0x00000000)) - return 0; - printf("Error: Bad compare! failed\n"); - /* detected 2 bit error */ - return -1; - } - } - return 0; -} - -#define NAND_ECC_INIT() omap_hwecc_init() -#define NAND_ECC_CALC(data_buf, ecc_buf) omap_calculate_ecc(data_buf, ecc_buf) -#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\ - omap_correct_data(data_buf, ecc_gen, ecc_old) -#else -/* Software ECC APIs */ -#define NAND_ECC_INIT() -#define NAND_ECC_CALC(data_buf, ecc_buf) nand_calculate_ecc(data_buf, ecc_buf) -#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\ - nand_correct_data(data_buf, ecc_gen, ecc_old) -#endif /* NAND_HW_ROMCODE_ECC_LAYOUT */ - -/* read a page with ECC */ -static int nand_read_page(u_char *buf, ulong page_addr) -{ -#ifdef ECC_CHECK_ENABLE - u_char ecc_code[ECC_SIZE]; - u_char ecc_calc[ECC_SIZE]; - u_char oob_buf[OOB_SIZE]; -#endif - u16 val; - int cntr; - int len; - int count; - -#ifdef NAND_16BIT - u16 *p = (u16 *) buf; -#else - u_char *p = (u_char *) buf; -#endif - - NAND_ENABLE_CE(); - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_COLUMN_PAGE, page_addr); - NanD_Command(NAND_CMD_READSTART); - NAND_WAIT_READY(); - - /* A delay seems to be helping here. needs more investigation */ - delay(10000); - len = (DEV_WIDTH == 1) ? ECC_BLOCK_SIZE >> 1 : ECC_BLOCK_SIZE; - - /* Read in chunks of data. */ - for (count = 0; count < ECC_SIZE; count += ECC_STEPS) { - NAND_ECC_INIT(); - for (cntr = 0; cntr < len; cntr++) { - *p++ = READ_NAND(NAND_ADDR); - delay(10); - } - NAND_ECC_CALC((p - ECC_BLOCK_SIZE), &ecc_calc[count]); - } - -#ifdef ECC_CHECK_ENABLE -#ifdef NAND_16BIT - p = (u16 *) oob_buf; -#else - p = (u_char *) oob_buf; -#endif - len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE; - for (cntr = 0; cntr < len; cntr++) { - *p++ = READ_NAND(NAND_ADDR); - delay(10); - } - count = 0; - NAND_DISABLE_CE(); /* set pin high */ - - /* Pick the ECC bytes out of the oob data */ - for (cntr = 0; cntr < ECC_SIZE; cntr++) - ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; - - for (count = 0, cntr = 0; cntr < PAGE_SIZE / ECC_BLOCK_SIZE; - cntr++, count += ECC_STEPS) { - if (NAND_ECC_CORRECT(buf, &ecc_code[count], &ecc_calc[count]) - == -1) { - printf("ECC Failed, page 0x%08x\n", page_addr); - for (val = 0; val < ECC_BLOCK_SIZE; val++) - printf("%x ", buf[val]); - printf(" Hang!!!\n"); - for (;;); - return 1; - } - buf += ECC_BLOCK_SIZE; - page_addr += ECC_BLOCK_SIZE; - } -#endif - return 0; -} - -/* read from the 16 bytes of oob data that correspond to a 512 / 2048 byte page. - */ -static int nand_read_oob(u_char *buf, ulong page_addr) -{ - int cntr; - int len; - -#ifdef NAND_16BIT - u16 *p = (u16 *) buf; -#else - u_char *p = (u_char *) buf; -#endif - len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE; - - NAND_ENABLE_CE(); /* set pin low */ - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_OOB, page_addr); - NanD_Command(NAND_CMD_READSTART); - NAND_WAIT_READY(); - - /* A delay seems to be helping here. needs more investigation */ - delay(10000); - for (cntr = 0; cntr < len; cntr++) - *p++ = READ_NAND(NAND_ADDR); - - NAND_WAIT_READY(); - NAND_DISABLE_CE(); /* set pin high */ - - return 0; -} - -#endif diff --git a/uart-monitor/drivers/k9f5616.c b/uart-monitor/drivers/k9f5616.c deleted file mode 100644 index 4081664..0000000 --- a/uart-monitor/drivers/k9f5616.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * Jian Zhang - * - * Samsung K9F5616Q0C NAND chip driver for an OMAP16xx board - * - * This file is based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CFG_NAND_K9F5616 - -#define K9F5616_MFR 0xec -#define K9F5616_ID 0x45 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define PAGE_SIZE 512 - -static int nand_read_page(u_char *buf, ulong page_addr); -static int nand_read_oob(u_char * buf, ulong page_addr); - -/* JFFS2 512-byte-page ECC layout */ -static u_char ecc_pos[] = {0,1,2,3,6,7}; -static u_char eccvalid_pos = 4; - -/* NanD_Command: Send a flash command to the flash chip */ -static int NanD_Command(unsigned char command) -{ - NAND_CTL_SETCLE(NAND_ADDR); - WRITE_NAND_COMMAND(command, NAND_ADDR); - NAND_CTL_CLRCLE(NAND_ADDR); - - if(command == NAND_CMD_RESET){ - unsigned char ret_val; - NanD_Command(NAND_CMD_STATUS); - do{ - ret_val = READ_NAND(NAND_ADDR);/* wait till ready */ - } while((ret_val & 0x40) != 0x40); - } - - NAND_WAIT_READY(); - return 0; -} - -/* NanD_Address: Set the current address for the flash chip */ -static int NanD_Address(int numbytes, unsigned long ofs) -{ - int i; - - NAND_CTL_SETALE(NAND_ADDR); - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - ofs = ofs >> 8; - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) - for (i = 0; i < 2; i++, ofs = ofs >> 8) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - NAND_CTL_CLRALE(NAND_ADDR); - - NAND_WAIT_READY(); - return 0; -} - -/* read chip mfr and id - * return 0 if they match board config - * return 1 if not - */ -int nand_chip() -{ - int mfr, id; - - NAND_ENABLE_CE(); - - if (NanD_Command(NAND_CMD_RESET)) { - printf("Err: RESET\n"); - NAND_DISABLE_CE(); - return 1; - } - - if (NanD_Command(NAND_CMD_READID)) { - printf("Err: READID\n"); - NAND_DISABLE_CE(); - return 1; - } - - NanD_Address(ADDR_COLUMN, 0); - - mfr = READ_NAND(NAND_ADDR); - id = READ_NAND(NAND_ADDR); - - NAND_DISABLE_CE(); - - return (mfr != K9F5616_MFR || id != K9F5616_ID); -} - -/* read a block data to buf - * return 1 if the block is bad or ECC error can't be corrected for any page - * return 0 on sucess - */ -int nand_read_block(unsigned char *buf, ulong block_addr) -{ - int i, offset = 0; - uchar oob_buf[16]; - - /* check bad block */ - /* 0th and 5th words need be 0xffff */ - if (nand_read_oob(oob_buf, block_addr) || -// oob_buf[0] != 0xff || oob_buf[1] != 0xff || -// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){ - oob_buf[5] != 0xff){ - printf("Skipped bad block at 0x%x\n", block_addr); - return 1; /* skip bad block */ - } - - /* read the block page by page*/ - for (i=0; i<32; i++){ - if (nand_read_page(buf+offset, block_addr + offset)) - return 1; - offset += PAGE_SIZE; - } - - return 0; -} - -/* read a page with ECC */ -static int nand_read_page(u_char *buf, ulong page_addr) -{ - u_char ecc_code[6]; - u_char ecc_calc[3]; - u_char oob_buf[16]; - u_char *p; - u16 val; - int cntr; - - NAND_ENABLE_CE(); - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1); - - NAND_WAIT_READY(); - p = buf; - for (cntr = 0; cntr < 256; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - - p = oob_buf; - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - NAND_DISABLE_CE(); /* set pin high */ - - /* Pick the ECC bytes out of the oob data */ - for (cntr = 0; cntr < 6; cntr++) - ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; - - - if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) { - nand_calculate_ecc (buf, &ecc_calc[0]); - if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr); - return 1; - } - } - - if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) { - nand_calculate_ecc (buf + 256, &ecc_calc[0]); - if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr+0x100); - return 1; - } - } - - return 0; -} - -/* read from the 16 bytes of oob data that correspond to a 512 byte page. - */ -static int nand_read_oob(u_char *buf, ulong page_addr) -{ - u16 val; - int cntr; - - NAND_ENABLE_CE(); /* set pin low */ - NanD_Command(NAND_CMD_READOOB); - NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1); - NAND_WAIT_READY(); - - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *buf++ = val & 0xff; - *buf++ = val >> 8; - } - - NAND_WAIT_READY(); - NAND_DISABLE_CE(); /* set pin high */ - - return 0; -} - -#endif diff --git a/uart-monitor/drivers/k9k1216.c b/uart-monitor/drivers/k9k1216.c deleted file mode 100644 index 888fb6b..0000000 --- a/uart-monitor/drivers/k9k1216.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * Jian Zhang - * - * Samsung K9K1216Q0C NAND chip driver for an OMAP2420 board - * - * This file is based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CFG_NAND_K9K1216 - -#define K9K1216_MFR 0xec -#define K9K1216_ID 0x46 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define PAGE_SIZE 512 -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -static int nand_read_page(u_char *buf, ulong page_addr); -static int nand_read_oob(u_char * buf, ulong page_addr); - -/* JFFS2 512-byte-page ECC layout */ -static u_char ecc_pos[] = {0,1,2,3,6,7}; -static u_char eccvalid_pos = 4; - -/* NanD_Command: Send a flash command to the flash chip */ -static int NanD_Command(unsigned char command) -{ - NAND_CTL_SETCLE(NAND_ADDR); - WRITE_NAND_COMMAND(command, NAND_ADDR); - NAND_CTL_CLRCLE(NAND_ADDR); - - if(command == NAND_CMD_RESET){ - unsigned char ret_val; - NanD_Command(NAND_CMD_STATUS); - do{ - ret_val = READ_NAND(NAND_ADDR);/* wait till ready */ - } while((ret_val & 0x40) != 0x40); - } - - NAND_WAIT_READY(); - return 0; -} - -/* NanD_Address: Set the current address for the flash chip */ -static int NanD_Address(int numbytes, unsigned long ofs) -{ - int i; - - NAND_CTL_SETALE(NAND_ADDR); - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - ofs = ofs >> 9; - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) - for (i = 0; i < 3; i++, ofs = ofs >> 8) - WRITE_NAND_ADDRESS(ofs, NAND_ADDR); - - NAND_CTL_CLRALE(NAND_ADDR); - - NAND_WAIT_READY(); - return 0; -} - -/* read chip mfr and id - * return 0 if they match board config - * return 1 if not - */ -int nand_chip() -{ - int mfr, id; - - NAND_ENABLE_CE(); - - if (NanD_Command(NAND_CMD_RESET)) { - printf("Err: RESET\n"); - NAND_DISABLE_CE(); - return 1; - } - - if (NanD_Command(NAND_CMD_READID)) { - printf("Err: READID\n"); - NAND_DISABLE_CE(); - return 1; - } - - NanD_Address(ADDR_COLUMN, 0); - - mfr = READ_NAND(NAND_ADDR); - id = READ_NAND(NAND_ADDR); - - NAND_DISABLE_CE(); - - return (mfr != K9K1216_MFR || id != K9K1216_ID); -} - -/* read a block data to buf - * return 1 if the block is bad or ECC error can't be corrected for any page - * return 0 on sucess - */ -int nand_read_block(unsigned char *buf, ulong block_addr) -{ - int i, offset = 0; - uchar oob_buf[16]; - - /* check bad block */ - /* 0th and 5th words need be 0xffff */ - if (nand_read_oob(oob_buf, block_addr) || -// oob_buf[0] != 0xff || oob_buf[1] != 0xff || -// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){ - oob_buf[5] != 0xff){ - printf("Skipped bad block at 0x%x\n", block_addr); - return 1; /* skip bad block */ - } - - /* read the block page by page*/ - for (i=0; i<32; i++){ - if (nand_read_page(buf+offset, block_addr + offset)) - return 1; - offset += PAGE_SIZE; - } - - return 0; -} -static count = 0; -/* read a page with ECC */ -static int nand_read_page(u_char *buf, ulong page_addr) -{ - u_char ecc_code[6]; - u_char ecc_calc[3]; - u_char oob_buf[16]; - u_char *p; - u16 val; - int cntr; - - NAND_ENABLE_CE(); - NanD_Command(NAND_CMD_READ0); - NanD_Address(ADDR_COLUMN_PAGE, page_addr); - NAND_WAIT_READY(); - - delay(500); /* we go through NFC need a bigger delay. 200 is not enough */ - - p = buf; - for (cntr = 0; cntr < 256; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - - p = oob_buf; - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *p++ = val & 0xff; - *p++ = val >> 8; - } - count = 1; - NAND_DISABLE_CE(); /* set pin high */ - - /* Pick the ECC bytes out of the oob data */ - for (cntr = 0; cntr < 6; cntr++) - ecc_code[cntr] = oob_buf[ecc_pos[cntr]]; - - if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) { - nand_calculate_ecc (buf, &ecc_calc[0]); - if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr); - for (val=0; val <256; val++) - printf("%x ", buf[val]); - printf("\n"); - for (;;); - return 1; - } - } - - if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) { - nand_calculate_ecc (buf + 256, &ecc_calc[0]); - if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) { - printf ("ECC Failed, page 0x%08x\n", page_addr+0x100); - for (val=0; val <256; val++) - printf("%x ", buf[val+256]); - printf("\n"); - for (;;); - return 1; - } - } - - return 0; -} - -/* read from the 16 bytes of oob data that correspond to a 512 byte page. - */ -static int nand_read_oob(u_char *buf, ulong page_addr) -{ - u16 val; - int cntr; - - NAND_ENABLE_CE(); /* set pin low */ - NanD_Command(NAND_CMD_READOOB); - NanD_Address(ADDR_COLUMN_PAGE, page_addr); - NAND_WAIT_READY(); - -/* do { - *(volatile u32 *)(0x6800A07c) = NAND_CMD_STATUS; - val = *(volatile u32 *)(0x6800A084); - printf("val = %x\n", val); - } while ((val & 0x40) != 0x40); -*/ - /* the above code from OSTBoot doesn't work, we use delay */ - delay(500); /* we go through NFC need a bigger delay. 200 is not enough */ - - for (cntr = 0; cntr < 8; cntr++){ - val = READ_NAND(NAND_ADDR); - *buf++ = val & 0xff; - *buf++ = val >> 8; - } - - NAND_WAIT_READY(); - NAND_DISABLE_CE(); /* set pin high */ - - return 0; -} - -#endif diff --git a/uart-monitor/drivers/ns16550.c b/uart-monitor/drivers/ns16550.c deleted file mode 100644 index b5a5c12..0000000 --- a/uart-monitor/drivers/ns16550.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * COM1 NS16550 support - * originally from linux source (arch/ppc/boot/ns16550.c) - * modified to use CFG_ISA_MEM and new defines - */ - -#include - -#ifdef CFG_PRINTF -#ifdef CFG_NS16550 - -#include - -#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */ -#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */ -#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */ - -void NS16550_init (NS16550_t com_port, int baud_divisor) -{ - com_port->ier = 0x00; -#ifdef CONFIG_OMAP - com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ -#endif - com_port->lcr = LCR_BKSE | LCRVAL; - com_port->dll = baud_divisor & 0xff; - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCRVAL; - com_port->mcr = MCRVAL; - com_port->fcr = FCRVAL; -#if defined(CONFIG_OMAP) - com_port->mdr1 = 0; /* select uart mode */ -#endif -} - -void NS16550_reinit (NS16550_t com_port, int baud_divisor) -{ - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE; - com_port->dll = baud_divisor & 0xff; - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCRVAL; - com_port->mcr = MCRVAL; - com_port->fcr = FCRVAL; -} - -void NS16550_putc (NS16550_t com_port, char c) -{ - while ((com_port->lsr & LSR_THRE) == 0); - com_port->thr = c; -} - -char NS16550_getc (NS16550_t com_port) -{ - while ((com_port->lsr & LSR_DR) == 0); - return (com_port->rbr); -} - -int NS16550_tstc (NS16550_t com_port) -{ - return ((com_port->lsr & LSR_DR) != 0); -} - -#endif -#endif diff --git a/uart-monitor/drivers/onenand.c b/uart-monitor/drivers/onenand.c deleted file mode 100644 index 7d4e454..0000000 --- a/uart-monitor/drivers/onenand.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * (C) Copyright 2005 Samsung Electronis - * Kyungmin Park - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#include - -#include "onenand_regs.h" - -#define onenand_readw(a) (*(volatile unsigned short *)(a)) -#define onenand_writew(v, a) ((*(volatile unsigned short *)(a)) = (u16) (v)) - -#define SAMSUNG_MFR_ID 0xEC -#define KFM1G16Q2A_DEV_ID 0x30 -#define KFN2G16Q2A_DEV_ID 0x40 - -#ifdef CFG_ONENAND - -#define THIS_ONENAND(a) (ONENAND_ADDR + (a)) - -#define READ_INTERRUPT() \ - onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT)) - -#define SET_EMIFS_CS_CONFIG(v) \ - (*(volatile unsigned long *)(OMAP_EMIFS_CS_CONFIG) = (v)) - -#define onenand_block_address(block) (block) -#define onenand_sector_address(page) (page << 2) -#define onenand_buffer_address() ((1 << 3) << 8) -#define onenand_bufferram_address(block) (0) - -#if defined(CFG_SYNC_BURST_READ) && defined(CONFIG_OMAP1610) -static inline void set_sync_burst_read(void) -{ - unsigned int value; - value = 0 - | (0x1 << 15) /* Read Mode: Synchronous */ - | (0x4 << 12) /* Burst Read Latency: 4 cycles */ - | (0x4 << 9) /* Burst Length: 8 word */ - | (0x1 << 7) /* RDY signal plarity */ - | (0x1 << 6) /* INT signal plarity */ - | (0x1 << 5) /* I/O buffer enable */ - ; - onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1)); - - value = 0 - | (4 << 16) /* Synchronous Burst Read */ - | (1 << 12) /* PGWST/WELEN */ - | (1 << 8) /* WRWST */ - | (4 << 4) /* RDWST */ - | (1 << 0) /* FCLKDIV => 48MHz */ - ; - SET_EMIFS_CS_CONFIG(value); -} - -static inline void set_async_read(void) -{ - unsigned int value; - value = 0 - | (0x0 << 15) /* Read Mode: Asynchronous */ - | (0x4 << 12) /* Burst Read Latency: 4 cycles */ - | (0x0 << 9) /* Burst Length: continuous */ - | (0x1 << 7) /* RDY signal plarity */ - | (0x1 << 6) /* INT signal plarity */ - | (0x0 << 5) /* I/O buffer disable */ - ; - onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1)); - - value = 0 - | (0 << 16) /* Asynchronous Read */ - | (1 << 12) /* PGWST/WELEN */ - | (1 << 8) /* WRWST */ - | (3 << 4) /* RDWST */ - | (1 << 0) /* FCLKDIV => 48MHz */ - ; - SET_EMIFS_CS_CONFIG(value); -} -#else -#define set_sync_burst_read(...) do { } while (0) -#define set_async_read(...) do { } while (0) -#endif - -int -onenand_chip() -{ - unsigned short mf_id, dev_id; - mf_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_MANUFACTURER_ID))); - dev_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_DEVICE_ID))); - - if(mf_id == SAMSUNG_MFR_ID) { - if (dev_id == KFM1G16Q2A_DEV_ID) { - printf("Detected Samsung MuxOneNAND1G Flash \r\n"); - return 0; - } else if (dev_id == KFN2G16Q2A_DEV_ID) { - printf("Detected Samsung MuxOneNAND2G Flash \r\n"); - return 0; - } else { - printf(" ONENAND Flash unsupported\r\n"); - return 1; - } - } else { - printf("ONENAND Flash Unsupported\r\n"); - return 1; - } -} - -/* read a page with ECC */ -static inline int onenand_read_page(ulong block, ulong page, u_char *buf) -{ - unsigned long *base; - -#ifndef __HAVE_ARCH_MEMCPY32 - unsigned int offset, value; - unsigned long *p; -#endif - - onenand_writew(onenand_block_address(block), - THIS_ONENAND(ONENAND_REG_START_ADDRESS1)); - - onenand_writew(onenand_sector_address(page), - THIS_ONENAND(ONENAND_REG_START_ADDRESS8)); - - onenand_writew(onenand_buffer_address(), - THIS_ONENAND(ONENAND_REG_START_BUFFER)); - - onenand_writew(onenand_bufferram_address(block), - THIS_ONENAND(ONENAND_REG_START_ADDRESS2)); - - onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT)); - - onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND)); - -#ifndef __HAVE_ARCH_MEMCPY32 - p = (unsigned long *) buf; -#endif - base = (unsigned long *) (ONENAND_ADDR + ONENAND_DATARAM); - - while (!(READ_INTERRUPT() & ONENAND_INT_MASTER)) - continue; - -#ifdef __HAVE_ARCH_MEMCPY32 - /* 32 bytes boundary memory copy */ - memcpy32(buf, base, ONENAND_PAGE_SIZE); -#else - for (offset = 0; offset < (ONENAND_PAGE_SIZE >> 2); offset++) { - value = *(base + offset); - *p++ = value; - } -#endif - - return 0; -} - -#define ONENAND_START_PAGE 0 -#define ONENAND_PAGES_PER_BLOCK 64 - -/** - * onenand_read_block - Read a block data to buf - * @return 0 on sucess - */ - -int onenand_read_block(unsigned char *buf, ulong block) -{ - int page, offset = 0; - - set_sync_burst_read(); - - /* NOTE: you must read page from page 1 of block 0 */ - /* read the block page by page*/ - for (page = ONENAND_START_PAGE; - page < ONENAND_PAGES_PER_BLOCK; page++) { - - onenand_read_page(block, page, buf + offset); - - offset += ONENAND_PAGE_SIZE; - } - - set_async_read(); - - return 0; -} - -#endif /* CFG_ONENAND */ diff --git a/uart-monitor/drivers/onenand_regs.h b/uart-monitor/drivers/onenand_regs.h deleted file mode 100644 index d8acc8c..0000000 --- a/uart-monitor/drivers/onenand_regs.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * linux/include/linux/mtd/onenand_regs.h - * - * OneNAND Register header file - * - * Copyright (C) 2005 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ONENAND_REG_H -#define __ONENAND_REG_H - -/* Memory Address Map Translation (Word order) */ -#define ONENAND_MEMORY_MAP(x) ((x) << 1) - -/* - * External BufferRAM area - */ -#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) -#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) -#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) - -/* - * OneNAND Registers - */ -#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) -#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) -#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) -#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) -#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) -#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) -#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) - -#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100) -#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101) -#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102) -#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103) -#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104) -#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105) -#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106) -#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107) - -#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200) -#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220) -#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221) -#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222) -#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240) -#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241) -#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C) -#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D) -#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E) - -#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00) -#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01) -#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02) -#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03) -#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04) -#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05) -#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06) -#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07) -#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08) - -/* - * Device ID Register F001h (R) - */ -#define ONENAND_DEVICE_DENSITY_SHIFT (4) -#define ONENAND_DEVICE_IS_DDP (1 << 3) -#define ONENAND_DEVICE_IS_DEMUX (1 << 2) -#define ONENAND_DEVICE_VCC_MASK (0x3) - -#define ONENAND_DEVICE_DENSITY_512Mb (0x002) - -/* - * Version ID Register F002h (R) - */ -#define ONENAND_VERSION_PROCESS_SHIFT (8) - -/* - * Start Address 1 F100h (R/W) - */ -#define ONENAND_DDP_SHIFT (15) - -/* - * Start Address 8 F107h (R/W) - */ -#define ONENAND_FPA_MASK (0x3f) -#define ONENAND_FPA_SHIFT (2) -#define ONENAND_FSA_MASK (0x03) - -/* - * Start Buffer Register F200h (R/W) - */ -#define ONENAND_BSA_MASK (0x03) -#define ONENAND_BSA_SHIFT (8) -#define ONENAND_BSA_BOOTRAM (0 << 2) -#define ONENAND_BSA_DATARAM0 (2 << 2) -#define ONENAND_BSA_DATARAM1 (3 << 2) -#define ONENAND_BSC_MASK (0x03) - -/* - * Command Register F220h (R/W) - */ -#define ONENAND_CMD_READ (0x00) -#define ONENAND_CMD_READOOB (0x13) -#define ONENAND_CMD_PROG (0x80) -#define ONENAND_CMD_PROGOOB (0x1A) -#define ONENAND_CMD_UNLOCK (0x23) -#define ONENAND_CMD_LOCK (0x2A) -#define ONENAND_CMD_LOCK_TIGHT (0x2C) -#define ONENAND_CMD_ERASE (0x94) -#define ONENAND_CMD_RESET (0xF0) -#define ONENAND_CMD_READID (0x90) - -/* NOTE: Those are not *REAL* commands */ -#define ONENAND_CMD_BUFFERRAM (0x1978) - -/* - * System Configuration 1 Register F221h (R, R/W) - */ -#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15) -#define ONENAND_SYS_CFG1_BRL (12) -#define ONENAND_SYS_CFG1_BL (9) -#define ONENAND_SYS_CFG1_NO_ECC (1 << 8) -#define ONENAND_SYS_CFG1_RDY (1 << 7) -#define ONENAND_SYS_CFG1_INT (1 << 6) -#define ONENAND_SYS_CFG1_IOBE (1 << 5) -#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4) - -/* - * Controller Status Register F240h (R) - */ -#define ONENAND_CTRL_ONGO (1 << 15) -#define ONENAND_CTRL_LOCK (1 << 14) -#define ONENAND_CTRL_LOAD (1 << 13) -#define ONENAND_CTRL_PROGRAM (1 << 12) -#define ONENAND_CTRL_ERASE (1 << 11) -#define ONENAND_CTRL_ERROR (1 << 10) -#define ONENAND_CTRL_RSTB (1 << 7) - -/* - * Interrupt Status Register F241h (R) - */ -#define ONENAND_INT_MASTER (1 << 15) -#define ONENAND_INT_READ (1 << 7) -#define ONENAND_INT_WRITE (1 << 6) -#define ONENAND_INT_ERASE (1 << 5) -#define ONENAND_INT_RESET (1 << 4) -#define ONENAND_INT_CLEAR (0 << 0) - -/* - * NAND Flash Write Protection Status Register F24Eh (R) - */ -#define ONENAND_WP_US (1 << 2) -#define ONENAND_WP_LS (1 << 1) -#define ONENAND_WP_LTS (1 << 0) - -/* - * ECC Status Reigser FF00h (R) - */ -#define ONENAND_ECC_1BIT (1 << 0) -#define ONENAND_ECC_2BIT (1 << 1) -#define ONENAND_ECC_2BIT_ALL (0xAAAA) - -#endif /* __ONENAND_REG_H */ diff --git a/uart-monitor/drivers/serial.c b/uart-monitor/drivers/serial.c deleted file mode 100644 index b9ecf2a..0000000 --- a/uart-monitor/drivers/serial.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CFG_PRINTF -#ifdef CFG_NS16550_SERIAL - -#include -#ifdef CFG_NS87308 -#include -#endif - -#if CONFIG_CONS_INDEX == 1 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM1; -#elif CONFIG_CONS_INDEX == 2 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM2; -#elif CONFIG_CONS_INDEX == 3 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM3; -#elif CONFIG_CONS_INDEX == 4 -static NS16550_t console = (NS16550_t) CFG_NS16550_COM4; -#else -#error no valid console defined -#endif - -static int calc_divisor (void) -{ -// DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_OMAP1510 - /* If can't cleanly clock 115200 set div to 1 */ - if ((CFG_NS16550_CLK == 12000000) && (CONFIG_BAUDRATE == 115200)) { - console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */ - return (1); /* return 1 for base divisor */ - } - console->osc_12m_sel = 0; /* clear if previsouly set */ -#endif -#if defined(CONFIG_OMAP1610) || defined(CONFIG_OMAP1710) - /* If can't cleanly clock 115200 set div to 1 */ - if ((CFG_NS16550_CLK == 48000000) && (CONFIG_BAUDRATE == 115200)) { - return (26); /* return 26 for base divisor */ - } -#endif - return (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE); -} - -int serial_init (void) -{ - int clock_divisor = calc_divisor(); - -#ifdef CFG_NS87308 - initialise_ns87308(); -#endif - - NS16550_init(console, clock_divisor); - - return (0); -} - -void -serial_putc(const char c) -{ - if (c == '\n') - NS16550_putc(console, '\r'); - - NS16550_putc(console, c); -} - -void -serial_puts (const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - - -int -serial_getc(void) -{ - return NS16550_getc(console); -} - -int -serial_tstc(void) -{ - return NS16550_tstc(console); -} - -void -serial_setbrg (void) -{ - int clock_divisor; - - clock_divisor = calc_divisor(); - NS16550_reinit(console, clock_divisor); -} - -#endif -#endif diff --git a/uart-monitor/fs/Makefile b/uart-monitor/fs/Makefile deleted file mode 100644 index f419b99..0000000 --- a/uart-monitor/fs/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000, 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# - -SUBDIRS := fat - -.depend all: - @for dir in $(SUBDIRS) ; do \ - $(MAKE) -C $$dir $@ ; done diff --git a/uart-monitor/fs/fat/Makefile b/uart-monitor/fs/fat/Makefile deleted file mode 100644 index e462757..0000000 --- a/uart-monitor/fs/fat/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -TOPDIR=../../ - -include $(TOPDIR)/config.mk - -LIB = libfat.a - -AOBJS = -COBJS = fat.o file.o - -OBJS = $(AOBJS) $(COBJS) - -all: $(LIB) $(AOBJS) - -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) - - -######################################################################### - -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-monitor/fs/fat/fat.c b/uart-monitor/fs/fat/fat.c deleted file mode 100644 index bad4f6c..0000000 --- a/uart-monitor/fs/fat/fat.c +++ /dev/null @@ -1,927 +0,0 @@ -/* - * fat.c - * - * R/O (V)FAT 12/16/32 filesystem implementation by Marcus Sundberg - * - * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6 - * 2003-03-10 - kharris@nexus-tech.net - ported to uboot - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#ifdef CFG_CMD_FAT - -/* - * Convert a string to lowercase. - */ -static void -downcase(char *str) -{ - while (*str != '\0') { - TOLOWER(*str); - str++; - } -} - -static block_dev_desc_t *cur_dev = NULL; -static unsigned long part_offset = 0; -static int cur_part = 1; - -#define DOS_PART_TBL_OFFSET 0x1be -#define DOS_PART_MAGIC_OFFSET 0x1fe -#define DOS_FS_TYPE_OFFSET 0x52 - -int strncmp(const char * cs,const char * ct,size_t count) -{ - register signed char __res = 0; - - while (count) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - count--; - } - - return __res; -} - -char * strcpy(char * dest,const char *src) -{ - char *tmp = dest; - - while ((*dest++ = *src++) != '\0') - /* nothing */; - return tmp; -} - -int strcmp(const char * cs,const char * ct) -{ - register signed char __res; - - while (1) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - } - - return __res; -} -void * memcpy(void * dest,const void *src,size_t count) -{ - char *tmp = (char *) dest, *s = (char *) src; - - while (count--) - *tmp++ = *s++; - - return dest; -} - - -int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) -{ - startblock += part_offset; - if (cur_dev == NULL) - return -1; - if (cur_dev->block_read) { - return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr); - } - return -1; -} - - -int -fat_register_device(block_dev_desc_t *dev_desc, int part_no) -{ - unsigned char buffer[SECTOR_SIZE]; - - if (!dev_desc->block_read) - return -1; - cur_dev=dev_desc; - /* check if we have a MBR (on floppies we have only a PBR) */ - if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { - printf ("** Can't read from device %d **\n", dev_desc->dev); - return -1; - } - if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || - buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { - /* no signature found */ - return -1; - } - if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { - /* ok, we assume we are on a PBR only */ - cur_part = 1; - part_offset=0; - } - else { -#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_COMMANDS & CFG_CMD_MMC) || defined(CONFIG_SYSTEMACE) - disk_partition_t info; - if(!get_partition_info(dev_desc, part_no, &info)) { - part_offset = info.start; - cur_part = part_no; - } - else { - printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev); - return -1; - } -#else - /* FIXME we need to determine the start block of the - * partition where the DOS FS resides. This can be done - * by using the get_partition_info routine. For this - * purpose the libpart must be included. - */ - part_offset=63; - //part_offset=0; - cur_part = 1; -#endif - } - return 0; -} - - -/* - * Get the first occurence of a directory delimiter ('/' or '\') in a string. - * Return index into string if found, -1 otherwise. - */ -static int -dirdelim(char *str) -{ - char *start = str; - - while (*str != '\0') { - if (ISDIRDELIM(*str)) return str - start; - str++; - } - return -1; -} - - -/* - * Match volume_info fs_type strings. - * Return 0 on match, -1 otherwise. - */ -static int -compare_sign(char *str1, char *str2) -{ - char *end = str1+SIGNLEN; - - while (str1 != end) { - if (*str1 != *str2) { - return -1; - } - str1++; - str2++; - } - - return 0; -} - - -/* - * Extract zero terminated short name from a directory entry. - */ -static void get_name (dir_entry *dirent, char *s_name) -{ - char *ptr; - - memcpy (s_name, dirent->name, 8); - s_name[8] = '\0'; - ptr = s_name; - while (*ptr && *ptr != ' ') - ptr++; - if (dirent->ext[0] && dirent->ext[0] != ' ') { - *ptr = '.'; - ptr++; - memcpy (ptr, dirent->ext, 3); - ptr[3] = '\0'; - while (*ptr && *ptr != ' ') - ptr++; - } - *ptr = '\0'; - if (*s_name == DELETED_FLAG) - *s_name = '\0'; - else if (*s_name == aRING) - *s_name = 'å'; - downcase (s_name); -} - -/* - * Get the entry at index 'entry' in a FAT (12/16/32) table. - * On failure 0x00 is returned. - */ -static __u32 -get_fatent(fsdata *mydata, __u32 entry) -{ - __u32 bufnum; - __u32 offset; - __u32 ret = 0x00; - - switch (mydata->fatsize) { - case 32: - bufnum = entry / FAT32BUFSIZE; - offset = entry - bufnum * FAT32BUFSIZE; - break; - case 16: - bufnum = entry / FAT16BUFSIZE; - offset = entry - bufnum * FAT16BUFSIZE; - break; - case 12: - bufnum = entry / FAT12BUFSIZE; - offset = entry - bufnum * FAT12BUFSIZE; - break; - - default: - /* Unsupported FAT size */ - return ret; - } - /* Read a new block of FAT entries into the cache. */ - if (bufnum != mydata->fatbufnum) { - int getsize = FATBUFSIZE/FS_BLOCK_SIZE; - __u8 *bufptr = mydata->fatbuf; - __u32 fatlength = mydata->fatlength; - __u32 startblock = bufnum * FATBUFBLOCKS; - unsigned long i; - - fatlength *= SECTOR_SIZE; /* We want it in bytes now */ - startblock += mydata->fat_sect; /* Offset from start of disk */ - - if (getsize > fatlength) getsize = fatlength; - if (disk_read(startblock, getsize, bufptr) < 0) { - FAT_DPRINT("Error reading FAT blocks\n"); - return ret; - } - mydata->fatbufnum = bufnum; - } - - /* Get the actual entry from the table */ - switch (mydata->fatsize) { - case 32: - ret = FAT2CPU32(((__u32*)mydata->fatbuf)[offset]); - break; - case 16: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[offset]); - break; - case 12: { - __u32 off16 = (offset*3)/4; - __u16 val1, val2; - - switch (offset & 0x3) { - case 0: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); - ret &= 0xfff; - break; - case 1: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); - val1 &= 0xf000; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); - val2 &= 0x00ff; - ret = (val2 << 4) | (val1 >> 12); - break; - case 2: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); - val1 &= 0xff00; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); - val2 &= 0x000f; - ret = (val2 << 8) | (val1 >> 8); - break; - case 3: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);; - ret = (ret & 0xfff0) >> 4; - break; - default: - break; - } - } - break; - } - FAT_DPRINT("ret: %d, offset: %d\n", ret, offset); - - return ret; -} - - -/* - * Read at most 'size' bytes from the specified cluster into 'buffer'. - * Return 0 on success, -1 otherwise. - */ -static int -get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) -{ - int idx = 0; - __u32 startsect; - - if (clustnum > 0) { - startsect = mydata->data_begin + clustnum*mydata->clust_size; - } else { - startsect = mydata->rootdir_sect; - } - - if (disk_read(startsect, size/FS_BLOCK_SIZE , buffer) < 0) { - FAT_DPRINT("Error reading data\n"); - return -1; - } - if(size % FS_BLOCK_SIZE) { - __u8 tmpbuf[FS_BLOCK_SIZE]; - idx= size/FS_BLOCK_SIZE; - if (disk_read(startsect + idx, 1, tmpbuf) < 0) { - FAT_DPRINT("Error reading data\n"); - return -1; - } - buffer += idx*FS_BLOCK_SIZE; - - memcpy(buffer, tmpbuf, size % FS_BLOCK_SIZE); - return 0; - } - - return 0; -} - - -/* - * Read at most 'maxsize' bytes from the file associated with 'dentptr' - * into 'buffer'. - * Return the number of bytes read or -1 on fatal errors. - */ -static long -get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, - unsigned long maxsize) -{ - unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0; - unsigned int bytesperclust = mydata->clust_size * SECTOR_SIZE; - __u32 curclust = START(dentptr); - __u32 endclust, newclust; - unsigned long actsize; - - FAT_DPRINT("Filesize: %ld bytes\n", filesize); - - if (maxsize > 0 && filesize > maxsize) filesize = maxsize; - - FAT_DPRINT("Reading: %ld bytes\n", filesize); - - actsize=bytesperclust; - endclust=curclust; - do { - /* search for consecutive clusters */ - while(actsize < filesize) { - newclust = get_fatent(mydata, endclust); - if((newclust -1)!=endclust) - goto getit; - if (newclust <= 0x0001 || newclust >= 0xfff0) { - FAT_DPRINT("curclust: 0x%x\n", newclust); - FAT_DPRINT("Invalid FAT entry\n"); - return gotsize; - } - endclust=newclust; - actsize+= bytesperclust; - } - /* actsize >= file size */ - actsize -= bytesperclust; - /* get remaining clusters */ - if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); - return -1; - } - /* get remaining bytes */ - gotsize += (int)actsize; - filesize -= actsize; - buffer += actsize; - actsize= filesize; - if (get_cluster(mydata, endclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); - return -1; - } - gotsize+=actsize; - return gotsize; -getit: - if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); - return -1; - } - gotsize += (int)actsize; - filesize -= actsize; - buffer += actsize; - curclust = get_fatent(mydata, endclust); - if (curclust <= 0x0001 || curclust >= 0xfff0) { - FAT_DPRINT("curclust: 0x%x\n", curclust); - FAT_ERROR("Invalid FAT entry\n"); - return gotsize; - } - actsize=bytesperclust; - endclust=curclust; - } while (1); -} - - -#ifdef CONFIG_SUPPORT_VFAT -/* - * Extract the file name information from 'slotptr' into 'l_name', - * starting at l_name[*idx]. - * Return 1 if terminator (zero byte) is found, 0 otherwise. - */ -static int -slot2str(dir_slot *slotptr, char *l_name, int *idx) -{ - int j; - - for (j = 0; j <= 8; j += 2) { - l_name[*idx] = slotptr->name0_4[j]; - if (l_name[*idx] == 0x00) return 1; - (*idx)++; - } - for (j = 0; j <= 10; j += 2) { - l_name[*idx] = slotptr->name5_10[j]; - if (l_name[*idx] == 0x00) return 1; - (*idx)++; - } - for (j = 0; j <= 2; j += 2) { - l_name[*idx] = slotptr->name11_12[j]; - if (l_name[*idx] == 0x00) return 1; - (*idx)++; - } - - return 0; -} - -/* Calculate short name checksum */ -static __u8 -mkcksum(const char *str) -{ - int i; - __u8 ret = 0; - - for (i = 0; i < 11; i++) { - ret = (((ret&1)<<7)|((ret&0xfe)>>1)) + str[i]; - } - - return ret; -} -#endif - - -/* - * Get the directory entry associated with 'filename' from the directory - * starting at 'startsect' - */ - - -static dir_entry *get_dentfromdir (fsdata * mydata, int startsect, - char *filename, dir_entry * retdent, - int dols) -{ - -} - -#if 0 -__u8 get_dentfromdir_block[MAX_CLUSTSIZE]; -static dir_entry *get_dentfromdir (fsdata * mydata, int startsect, - char *filename, dir_entry * retdent, - int dols) -{ - __u16 prevcksum = 0xffff; - __u32 curclust = START (retdent); - int files = 0, dirs = 0; - - while (1) { - dir_entry *dentptr; - int i; - - if (get_cluster (mydata, curclust, get_dentfromdir_block, - mydata->clust_size * SECTOR_SIZE) != 0) { - FAT_DPRINT ("Error: reading directory block\n"); - return NULL; - } - dentptr = (dir_entry *) get_dentfromdir_block; - for (i = 0; i < DIRENTSPERCLUST; i++) { - char s_name[14], l_name[256]; - - l_name[0] = '\0'; - if (dentptr->name[0] == DELETED_FLAG) { - dentptr++; - continue; - } - if ((dentptr->attr & ATTR_VOLUME)) { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } - if (dentptr->name[0] == 0) { - if (dols) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - } - FAT_DPRINT ("Dentname == NULL - %d\n", i); - return NULL; - } -#ifdef CONFIG_SUPPORT_VFAT - if (dols && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } -#endif - get_name (dentptr, s_name); - if (dols) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } - } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } - } - dentptr++; - continue; - } - if (strcmp (filename, s_name) && strcmp (filename, l_name)) { - FAT_DPRINT ("Mismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - memcpy (retdent, dentptr, sizeof (dir_entry)); - - FAT_DPRINT ("DentName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), - (dentptr->attr & ATTR_DIR) ? "(DIR)" : ""); - - return retdent; - } - curclust = get_fatent (mydata, curclust); - if (curclust <= 0x0001 || curclust >= 0xfff0) { - FAT_DPRINT ("curclust: 0x%x\n", curclust); - FAT_ERROR ("Invalid FAT entry\n"); - return NULL; - } - } - - return NULL; -} -#endif - - -/* - * Read boot sector and volume info from a FAT filesystem - */ -static int -read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize) -{ - __u8 block[FS_BLOCK_SIZE]; - volume_info *vistart; - - FAT_DPRINT("Reading boot sector\n"); - - if (disk_read(0, 1, block) < 0) { - FAT_DPRINT("Error: reading block\n"); - return -1; - } - - memcpy(bs, block, sizeof(boot_sector)); - bs->reserved = FAT2CPU16(bs->reserved); - bs->fat_length = FAT2CPU16(bs->fat_length); - bs->secs_track = FAT2CPU16(bs->secs_track); - bs->heads = FAT2CPU16(bs->heads); -#if 0 /* UNUSED */ - bs->hidden = FAT2CPU32(bs->hidden); -#endif - bs->total_sect = FAT2CPU32(bs->total_sect); - - /* FAT32 entries */ - if (bs->fat_length == 0) { - /* Assume FAT32 */ - bs->fat32_length = FAT2CPU32(bs->fat32_length); - bs->flags = FAT2CPU16(bs->flags); - bs->root_cluster = FAT2CPU32(bs->root_cluster); - bs->info_sector = FAT2CPU16(bs->info_sector); - bs->backup_boot = FAT2CPU16(bs->backup_boot); - vistart = (volume_info*) (block + sizeof(boot_sector)); - *fatsize = 32; - } else { - vistart = (volume_info*) &(bs->fat32_length); - *fatsize = 0; - } - memcpy(volinfo, vistart, sizeof(volume_info)); - - /* Terminate fs_type string. Writing past the end of vistart - is ok - it's just the buffer. */ - vistart->fs_type[8] = '\0'; - - if (*fatsize == 32) { - if (compare_sign(FAT32_SIGN, vistart->fs_type) == 0) { - return 0; - } - } else { - if (compare_sign(FAT12_SIGN, vistart->fs_type) == 0) { - *fatsize = 12; - return 0; - } - if (compare_sign(FAT16_SIGN, vistart->fs_type) == 0) { - *fatsize = 16; - return 0; - } - } - - FAT_DPRINT("Error: broken fs_type sign\n"); - return -1; -} - -#if 0 -__u8 do_fat_read_block[MAX_CLUSTSIZE]; /* Block buffer */ -#endif - -__u8 *fnamecopy = 0x80500000; -__u8 *do_fat_read_block = 0x80500880; - -boot_sector bs; -volume_info volinfo; -fsdata datablock; - -long -do_fat_read(const char *filename, void *buffer, unsigned long maxsize, - int dols) -{ -#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */ - static -#endif - fsdata *mydata = &datablock; - dir_entry *dentptr; - __u16 prevcksum = 0xffff; - char *subname = ""; - int rootdir_size, cursect; - int idx, isdir = 0; - int files = 0, dirs = 0; - long ret = 0; - int firsttime; - - if (read_bootsectandvi (&bs, &volinfo, &mydata->fatsize)) { - printf ("Error: reading boot sector\n"); - return -1; - } - if (mydata->fatsize == 32) { - mydata->fatlength = bs.fat32_length; - } else { - mydata->fatlength = bs.fat_length; - } - mydata->fat_sect = bs.reserved; - cursect = mydata->rootdir_sect - = mydata->fat_sect + mydata->fatlength * bs.fats; - mydata->clust_size = bs.cluster_size; - if (mydata->fatsize == 32) { - rootdir_size = mydata->clust_size; - mydata->data_begin = mydata->rootdir_sect /* + rootdir_size */ - - (mydata->clust_size * 2); - } else { - rootdir_size = ((bs.dir_entries[1] * (int) 256 + bs.dir_entries[0]) - * sizeof (dir_entry)) / SECTOR_SIZE; - mydata->data_begin = mydata->rootdir_sect + rootdir_size - - (mydata->clust_size * 2); - } - mydata->fatbufnum = -1; - - FAT_DPRINT ("FAT%d, fatlength: %d\n", mydata->fatsize, - mydata->fatlength); - FAT_DPRINT ("Rootdir begins at sector: %d, offset: %x, size: %d\n" - "Data begins at: %d\n", - mydata->rootdir_sect, mydata->rootdir_sect * SECTOR_SIZE, - rootdir_size, mydata->data_begin); - FAT_DPRINT ("Cluster size: %d\n", mydata->clust_size); - - /* "cwd" is always the root... */ - while (ISDIRDELIM (*filename)) - filename++; - /* Make a copy of the filename and convert it to lowercase */ - strcpy (fnamecopy, filename); - downcase (fnamecopy); - if (*fnamecopy == '\0') { - if (!dols){ - printf("\n not there\n"); - return -1; - } - dols = LS_ROOT; - } else if ((idx = dirdelim (fnamecopy)) >= 0) { - isdir = 1; - fnamecopy[idx] = '\0'; - subname = fnamecopy + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*subname)) - subname++; - } else if (dols) { - isdir = 1; - } - - while (1) { - int i; - - if (disk_read (cursect, mydata->clust_size, do_fat_read_block) < 0) { - printf ("Error: reading rootdir block\n"); - return -1; - } - dentptr = (dir_entry *) do_fat_read_block; - for (i = 0; i < DIRENTSPERBLOCK; i++) { - char s_name[14], l_name[256]; - - l_name[0] = '\0'; - if ((dentptr->attr & ATTR_VOLUME)) { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } else if (dentptr->name[0] == 0) { - FAT_DPRINT ("RootDentname == NULL - %d\n", i); - if (dols == LS_ROOT) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - return 0; - } - return -1; - } -#ifdef CONFIG_SUPPORT_VFAT - else if (dols == LS_ROOT - && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } -#endif - get_name (dentptr, s_name); - if (dols == LS_ROOT) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirc = '/'; - if (s_name[0] != 0) { - dirs++; - doit = 1; - } - } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } - } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } - } - dentptr++; - continue; - } - if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) { - FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - if (isdir && !(dentptr->attr & ATTR_DIR)) - return -1; - - FAT_DPRINT ("RootName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), isdir ? "(DIR)" : ""); - - goto rootdir_done; /* We got a match */ - } - cursect++; - } - rootdir_done: - - firsttime = 1; - while (isdir) { - int startsect = mydata->data_begin - + START (dentptr) * mydata->clust_size; - dir_entry dent; - char *nextname = NULL; - - dent = *dentptr; - dentptr = &dent; - idx = dirdelim (subname); - if (idx >= 0) { - subname[idx] = '\0'; - nextname = subname + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*nextname)) - nextname++; - if (dols && *nextname == '\0') - firsttime = 0; - } else { - if (dols && firsttime) { - firsttime = 0; - } else { - isdir = 0; - } - } - - if (get_dentfromdir (mydata, startsect, subname, dentptr, - isdir ? 0 : dols) == NULL) { - if (dols && !isdir) - return 0; - return -1; - } - - if (idx >= 0) { - if (!(dentptr->attr & ATTR_DIR)) - return -1; - subname = nextname; - } - } - ret = get_contents (mydata, dentptr, buffer, maxsize); - FAT_DPRINT ("Size: %d, got: %ld\n", FAT2CPU32 (dentptr->size), ret); - - return ret; -} - - -int -file_fat_detectfs(void) -{ - boot_sector bs; - volume_info volinfo; - int fatsize; - char vol_label[12]; - - if(cur_dev==NULL) { - printf("No current device\n"); - return 1; - } -#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_MMC) - printf("Interface: "); - switch(cur_dev->if_type) { - case IF_TYPE_IDE : printf("IDE"); break; - case IF_TYPE_SCSI : printf("SCSI"); break; - case IF_TYPE_ATAPI : printf("ATAPI"); break; - case IF_TYPE_USB : printf("USB"); break; - case IF_TYPE_DOC : printf("DOC"); break; - case IF_TYPE_MMC : printf("MMC"); break; - default : printf("Unknown"); - } - printf("\n Device %d: ",cur_dev->dev); - dev_print(cur_dev); -#endif - if(read_bootsectandvi(&bs, &volinfo, &fatsize)) { - printf("\nNo valid FAT fs found\n"); - return 1; - } - memcpy (vol_label, volinfo.volume_label, 11); - vol_label[11] = '\0'; - volinfo.fs_type[5]='\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label); - return 0; -} - - -int -file_fat_ls(const char *dir) -{ - return do_fat_read(dir, NULL, 0, LS_YES); -} - - -long -file_fat_read(const char *filename, void *buffer, unsigned long maxsize) -{ - long ret; - ret = do_fat_read(filename, buffer, maxsize, LS_NO); - return ret; -} - -#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */ diff --git a/uart-monitor/fs/fat/file.c b/uart-monitor/fs/fat/file.c deleted file mode 100644 index 2a2354e..0000000 --- a/uart-monitor/fs/fat/file.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * file.c - * - * Mini "VFS" by Marcus Sundberg - * - * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6 - * 2003-03-10 - kharris@nexus-tech.net - ported to uboot - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#if (CONFIG_COMMANDS & CFG_CMD_FAT) - -/* Supported filesystems */ -static const struct filesystem filesystems[] = { - { file_fat_detectfs, file_fat_ls, file_fat_read, "FAT" }, -}; -#define NUM_FILESYS (sizeof(filesystems)/sizeof(struct filesystem)) - -/* The filesystem which was last detected */ -static int current_filesystem = FSTYPE_NONE; - -/* The current working directory */ -#define CWD_LEN 511 -char file_cwd[CWD_LEN+1] = "/"; - -const char * -file_getfsname(int idx) -{ - if (idx < 0 || idx >= NUM_FILESYS) return NULL; - - return filesystems[idx].name; -} - - -static void -pathcpy(char *dest, const char *src) -{ - char *origdest = dest; - - do { - if (dest-file_cwd >= CWD_LEN) { - *dest = '\0'; - return; - } - *(dest) = *(src); - if (*src == '\0') { - if (dest-- != origdest && ISDIRDELIM(*dest)) { - *dest = '\0'; - } - return; - } - ++dest; - if (ISDIRDELIM(*src)) { - while (ISDIRDELIM(*src)) src++; - } else { - src++; - } - } while (1); -} - - -int -file_cd(const char *path) -{ - if (ISDIRDELIM(*path)) { - while (ISDIRDELIM(*path)) path++; - strncpy(file_cwd+1, path, CWD_LEN-1); - } else { - const char *origpath = path; - char *tmpstr = file_cwd; - int back = 0; - - while (*tmpstr != '\0') tmpstr++; - do { - tmpstr--; - } while (ISDIRDELIM(*tmpstr)); - - while (*path == '.') { - path++; - while (*path == '.') { - path++; - back++; - } - if (*path != '\0' && !ISDIRDELIM(*path)) { - path = origpath; - back = 0; - break; - } - while (ISDIRDELIM(*path)) path++; - origpath = path; - } - - while (back--) { - /* Strip off path component */ - while (!ISDIRDELIM(*tmpstr)) { - tmpstr--; - } - if (tmpstr == file_cwd) { - /* Incremented again right after the loop. */ - tmpstr--; - break; - } - /* Skip delimiters */ - while (ISDIRDELIM(*tmpstr)) tmpstr--; - } - tmpstr++; - if (*path == '\0') { - if (tmpstr == file_cwd) { - *tmpstr = '/'; - tmpstr++; - } - *tmpstr = '\0'; - return 0; - } - *tmpstr = '/'; - pathcpy(tmpstr+1, path); - } - - return 0; -} - - -int -file_detectfs(void) -{ - int i; - - current_filesystem = FSTYPE_NONE; - - for (i = 0; i < NUM_FILESYS; i++) { - if (filesystems[i].detect() == 0) { - strcpy(file_cwd, "/"); - current_filesystem = i; - break; - } - } - - return current_filesystem; -} - - -int -file_ls(const char *dir) -{ - char fullpath[1024]; - const char *arg; - - if (current_filesystem == FSTYPE_NONE) { - printf("Can't list files without a filesystem!\n"); - return -1; - } - - if (ISDIRDELIM(*dir)) { - arg = dir; - } else { - sprintf(fullpath, "%s/%s", file_cwd, dir); - arg = fullpath; - } - return filesystems[current_filesystem].ls(arg); -} - - -long -file_read(const char *filename, void *buffer, unsigned long maxsize) -{ - char fullpath[1024]; - const char *arg; - - if (current_filesystem == FSTYPE_NONE) { - printf("Can't load file without a filesystem!\n"); - return -1; - } - - if (ISDIRDELIM(*filename)) { - arg = filename; - } else { - sprintf(fullpath, "%s/%s", file_cwd, filename); - arg = fullpath; - } - - return filesystems[current_filesystem].read(arg, buffer, maxsize); -} - -#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */ diff --git a/uart-monitor/include/asm/arch-arm1136/bits.h b/uart-monitor/include/asm/arch-arm1136/bits.h deleted file mode 100644 index dc3273e..0000000 --- a/uart-monitor/include/asm/arch-arm1136/bits.h +++ /dev/null @@ -1,49 +0,0 @@ -/* bits.h - * Copyright (c) 2004 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -#endif - diff --git a/uart-monitor/include/asm/arch-arm1136/clocks.h b/uart-monitor/include/asm/arch-arm1136/clocks.h deleted file mode 120000 index c4b03ba..0000000 --- a/uart-monitor/include/asm/arch-arm1136/clocks.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/clocks.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-arm1136/clocks242x.h b/uart-monitor/include/asm/arch-arm1136/clocks242x.h deleted file mode 120000 index f080726..0000000 --- a/uart-monitor/include/asm/arch-arm1136/clocks242x.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/clocks242x.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-arm1136/clocks243x.h b/uart-monitor/include/asm/arch-arm1136/clocks243x.h deleted file mode 120000 index 703bdce..0000000 --- a/uart-monitor/include/asm/arch-arm1136/clocks243x.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/clocks243x.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-arm1136/mem.h b/uart-monitor/include/asm/arch-arm1136/mem.h deleted file mode 120000 index dd453b2..0000000 --- a/uart-monitor/include/asm/arch-arm1136/mem.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-arm1136/mem.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-arm1136/omap2420.h b/uart-monitor/include/asm/arch-arm1136/omap2420.h deleted file mode 100644 index 2164b68..0000000 --- a/uart-monitor/include/asm/arch-arm1136/omap2420.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2005 Texas Instruments, - * - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2420_SYS_H_ -#define _OMAP2420_SYS_H_ - -#include - - -#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) - -#define __raw_readb(a) (*(volatile unsigned char *)(a)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - - -/* - * 2420 specific Section - */ - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_SYSSTATUS (OMAP2420_GPMC_BASE+0x14) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) - -/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLA_STATUS (OMAP2420_SDRC_BASE+0x64) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_MCFG_1 (OMAP2420_SDRC_BASE+0xB0) -#define SDRC_MR_1 (OMAP2420_SDRC_BASE+0xB4) -#define SDRC_EMR2_1 (OMAP2420_SDRC_BASE+0xBC) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define SDRC_RFR_CTRL1 (OMAP2420_SDRC_BASE+0xD4) -#define SDRC_MANUAL_1 (OMAP2420_SDRC_BASE+0xD8) - -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 - -#define LOADDLL BIT2 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) - -/* - * H4 specific Section - */ - -/* - * The 2420's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x08000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#endif - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -/* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) -#endif /* endif CONFIG_2420H4 */ - -#endif - diff --git a/uart-monitor/include/asm/arch-arm1136/omap2430.h b/uart-monitor/include/asm/arch-arm1136/omap2430.h deleted file mode 100644 index cf2b0f9..0000000 --- a/uart-monitor/include/asm/arch-arm1136/omap2430.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2430_SYS_H_ -#define _OMAP2430_SYS_H_ - -#include - - -#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) - -#define __raw_readb(a) (*(volatile unsigned char *)(a)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - -/* device type */ -#define DEVICE_MASK (BIT8|BIT9|BIT10) -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 - -/* - * 2430 specific Section - */ -#define OMAP243X_CORE_L4_IO_BASE 0x48000000 -#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000 -#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE - - -/* CONTROL */ -#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000) -#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8) - -/* TAP information */ -#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000) -#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204) - -/* - GPMC : In 2430 NOR and NAND can coexist. - During NAND booting , NAND is at CS0 and NOR at CS1 - and Debug FPGA is GPMC_CS5 -*/ -#define OMAP24XX_GPMC_BASE (0x6E000000) - -#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10) -#define GPMC_SYSSTATUS (OMAP24XX_GPMC_BASE+0x14) -#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_5 (OMAP24XX_GPMC_BASE+0x150) -#define GPMC_CONFIG2_5 (OMAP24XX_GPMC_BASE+0x154) -#define GPMC_CONFIG3_5 (OMAP24XX_GPMC_BASE+0x158) -#define GPMC_CONFIG4_5 (OMAP24XX_GPMC_BASE+0x15C) -#define GPMC_CONFIG5_5 (OMAP24XX_GPMC_BASE+0x160) -#define GPMC_CONFIG6_5 (OMAP24XX_GPMC_BASE+0x164) -#define GPMC_CONFIG7_5 (OMAP24XX_GPMC_BASE+0x168) - - -/* SMS */ -#define OMAP24XX_SMS_BASE 0x6C000000 -#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10) - -/* SDRC */ -#define OMAP24XX_SDRC_BASE 0x6D000000 -#define OMAP24XX_SDRC_CS0 0x80000000 -#define OMAP24XX_SDRC_CS1 0xA0000000 -#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14) -#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60) -#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64) -#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0) -#define SDRC_MCFG_1 (OMAP24XX_SDRC_BASE+0xB0) -#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8) -#define SDRC_RFR_CTRL1 (OMAP24XX_SDRC_BASE+0xD4) - -#define LOADDLL BIT2 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2430_UART1 0x4806A000 -#define OMAP2430_UART2 0x4806C000 -#define OMAP2430_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000) -#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) -#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) -#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) -#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) -#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) -#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) -#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) -#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) -#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) -#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) -#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000) -#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000) -#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */ -#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000) - -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000) -#define S32K_CR (SYNC_32KTIMER_BASE+0x10) - -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000) - -#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060) -#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070) -#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078) -#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080) -#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084) -#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244) -#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300) -#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310) -#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340) -#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350) -#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400) -#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410) -#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840) -#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40) - -/* SMX-APE */ -#define SMX_APE_BASE 0x68000000 -#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) -#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) -#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) -#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) - -/* IVA2 */ -#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) - -/* - * The 2430's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP243X) - -/* GPMC */ -/* This is being used by the macros in mem.h. PHYS_FLASH_1 is defined to H4_CS0_BASE */ -# define H4_CS1_BASE 0x09000000 /* flash (64 Meg aligned) */ -#define CFG_FLASH_BASE H4_CS1_BASE -#define DEBUG_BASE 0x08000000 - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -#endif /* endif CONFIG_2430SDP */ - -#endif - diff --git a/uart-monitor/include/asm/arch-arm1136/sizes.h b/uart-monitor/include/asm/arch-arm1136/sizes.h deleted file mode 100644 index 3dddd8e..0000000 --- a/uart-monitor/include/asm/arch-arm1136/sizes.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_32K 0x00008000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_31M 0x01F00000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif /* __sizes_h */ - diff --git a/uart-monitor/include/asm/arch-arm1136/sys_info.h b/uart-monitor/include/asm/arch-arm1136/sys_info.h deleted file mode 100644 index 94a09cd..0000000 --- a/uart-monitor/include/asm/arch-arm1136/sys_info.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright 2005 (C) Texas Instruments, - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_SYS_INFO_H_ -#define _OMAP24XX_SYS_INFO_H_ - -#if 0 -typedef struct h4_system_data { - /* base board info */ - u32 base_b_rev; /* rev from base board i2c */ - /* cpu board info */ - u32 cpu_b_rev; /* rev from cpu board i2c */ - u32 cpu_b_mux; /* mux type on daughter board */ - u32 cpu_b_ddr_type; /* mem type */ - u32 cpu_b_ddr_speed; /* ddr speed rating */ - u32 cpu_b_switches; /* boot ctrl switch settings */ - /* cpu info */ - u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ - u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ -} h4_sys_data; - -#endif - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module*/ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_2420 0x2420 -#define CPU_2422 0x2422 /* 2420 + 64M stacked */ -#define CPU_2423 0x2423 /* 2420 + 96M stacked */ -#define CPU_2430 0x2430 - -/* 242x real hardware: - * ES1 = rev 0 - * ES2 = rev 1 - * ES2.05 = rev 2 - * ES2.1 = rev 3 - * ES2.1.1 = rev 4 - */ - -/* 242x code defines: - * ES1 = 0+1 = 1 - * ES2 = 1+1 = 2 - * ES2.05 = 2+1 = 3 - * ES2.1 = 3+1 = 4 - * Es2.1.1 = 4+1 = 5 - */ -#define CPU_2422_ES1 1 -#define CPU_2422_ES2 2 -#define CPU_2422_ES2_05 3 -#define CPU_2422_ES2_1 4 -#define CPU_2422_ES2_1_1 5 - -#define CPU_2420_ES1 1 -#define CPU_2420_ES2 2 -#define CPU_2420_ES2_05 3 -#define CPU_2420_ES2_1 4 -#define CPU_2420_ES2_1_1 5 - -#define CPU_242X_ES1 1 -#define CPU_242X_ES2 2 -#define CPU_242X_ES2_05 3 -#define CPU_242X_ES2_1 4 -#define CPU_242X_ES2_1_1 5 - -#define CPU_2420_2422_ES1 1 -#define CPU_2420_2422_ES2_1 4 - -/* 243x real hardware: - * ES1 = rev 0 - * ES2 = rev 1 - * - * 243x code defines: - * ES1 = 0+1 = 1 - * ES2 = 1+1 = 2 - */ -#define CPU_2430_ES1 1 -#define CPU_2430_ES2 2 - -#ifdef VPOM2430 -# define CPU_2430_VIRTIO 3 -#else -# define CPU_2430_VIRTIO 1 -#endif -#define CPU_2430_ZEBU 0xD - -#define CPU_2420_CHIPID 0x0B5D9000 -#define CPU_2430_CHIPID 0x0B68A000 -#define CPU_24XX_ID_MASK 0x0FFFF000 -#define CPU_242X_REV_MASK 0xF0000000 -#define CPU_242X_PID_MASK 0x000F0000 - -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 -#define BOARD_H4_MENELAUS_HRP 3 -#define BOARD_SDP_2430 4 - -#define GPMC_MUXED 1 -#define GPMC_NONMUXED 0 - -#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ -#define TYPE_NOR 0x000 -#define TYPE_ONENAND 0x800 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ - -#endif diff --git a/uart-monitor/include/asm/arch-arm926ejs/sizes.h b/uart-monitor/include/asm/arch-arm926ejs/sizes.h deleted file mode 100644 index ef0b99b..0000000 --- a/uart-monitor/include/asm/arch-arm926ejs/sizes.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA0 2111-1307 - * USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif /* __sizes_h */ diff --git a/uart-monitor/include/asm/arch-omap3/bits.h b/uart-monitor/include/asm/arch-omap3/bits.h deleted file mode 120000 index 036fe66..0000000 --- a/uart-monitor/include/asm/arch-omap3/bits.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/bits.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/clocks.h b/uart-monitor/include/asm/arch-omap3/clocks.h deleted file mode 120000 index 894fadf..0000000 --- a/uart-monitor/include/asm/arch-omap3/clocks.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/clocks.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/clocks343x.h b/uart-monitor/include/asm/arch-omap3/clocks343x.h deleted file mode 120000 index 92f7376..0000000 --- a/uart-monitor/include/asm/arch-omap3/clocks343x.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/clocks343x.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/cpu.h b/uart-monitor/include/asm/arch-omap3/cpu.h deleted file mode 120000 index 5c88731..0000000 --- a/uart-monitor/include/asm/arch-omap3/cpu.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/cpu.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S b/uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S deleted file mode 120000 index 803f515..0000000 --- a/uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_34xx.S \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S b/uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S deleted file mode 120000 index e8f2f9b..0000000 --- a/uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_36xx.S \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/mem.h b/uart-monitor/include/asm/arch-omap3/mem.h deleted file mode 120000 index b49b783..0000000 --- a/uart-monitor/include/asm/arch-omap3/mem.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/mem.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/mmc.h b/uart-monitor/include/asm/arch-omap3/mmc.h deleted file mode 100644 index 7bceb5f..0000000 --- a/uart-monitor/include/asm/arch-omap3/mmc.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * linux/drivers/mmc/mmc_pxa.h - * - * Author: Vladimir Shebordaev, Igor Oblakov - * Copyright: MontaVista Software Inc. - * - * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __MMC_PXA_P_H__ -#define __MMC_PXA_P_H__ - -/* PXA-250 MMC controller registers */ - -/* MMC_STRPCL */ -#define MMC_STRPCL_STOP_CLK (0x0001UL) -#define MMC_STRPCL_START_CLK (0x0002UL) - -/* MMC_STAT */ - -#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN\ - | MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE \ - | MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR) - -/* MMC_CLKRT */ -#define MMC_CLKRT_20MHZ (0x0000UL) -#define MMC_CLKRT_10MHZ (0x0001UL) -#define MMC_CLKRT_5MHZ (0x0002UL) -#define MMC_CLKRT_2_5MHZ (0x0003UL) -#define MMC_CLKRT_1_25MHZ (0x0004UL) -#define MMC_CLKRT_0_625MHZ (0x0005UL) -#define MMC_CLKRT_0_3125MHZ (0x0006UL) - -/* MMC_SPI */ -#define MMC_SPI_DISABLE (0x00UL) -#define MMC_SPI_EN (0x01UL) -#define MMC_SPI_CS_EN (0x01UL << 2) -#define MMC_SPI_CS_ADDRESS (0x01UL << 3) -#define MMC_SPI_CRC_ON (0x01UL << 1) - -/* MMC_CMDAT */ -#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7) -#define MMC_CMDAT_INIT (0x0001UL << 6) -#define MMC_CMDAT_BUSY (0x0001UL << 5) -#define MMC_CMDAT_STREAM (0x0001UL << 4) -#define MMC_CMDAT_BLOCK (0x0000UL << 4) -#define MMC_CMDAT_WRITE (0x0001UL << 3) -#define MMC_CMDAT_READ (0x0000UL << 3) -#define MMC_CMDAT_DATA_EN (0x0001UL << 2) -#define MMC_CMDAT_R1 (0x0001UL) -#define MMC_CMDAT_R2 (0x0002UL) -#define MMC_CMDAT_R3 (0x0003UL) - -/* MMC_RESTO */ -#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */ - -/* MMC_RDTO */ -#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */ - -/* MMC_BLKLEN */ -#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */ - -/* MMC_PRTBUF */ -#define MMC_PRTBUF_BUF_PART_FULL (0x01UL) -#define MMC_PRTBUF_BUF_FULL (0x00UL) - -/* MMC_I_MASK */ -#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6) -#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5) -#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4) -#define MMC_I_MASK_STOP_CMD (0x01UL << 3) -#define MMC_I_MASK_END_CMD_RES (0x01UL << 2) -#define MMC_I_MASK_PRG_DONE (0x01UL << 1) -#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL) -#define MMC_I_MASK_ALL (0x07fUL) - - -/* MMC_I_REG */ -#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6) -#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5) -#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4) -#define MMC_I_REG_STOP_CMD (0x01UL << 3) -#define MMC_I_REG_END_CMD_RES (0x01UL << 2) -#define MMC_I_REG_PRG_DONE (0x01UL << 1) -#define MMC_I_REG_DATA_TRAN_DONE (0x01UL) -#define MMC_I_REG_ALL (0x007fUL) - -/* MMC_CMD */ -#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */ -#define CMD(x) (x) - -#define MMC_DEFAULT_RCA 1 - -#define MMC_BLOCK_SIZE 512 -#define MMC_CMD_RESET 0 -#define MMC_CMD_SEND_OP_COND 1 -#define MMC_CMD_ALL_SEND_CID 2 -#define MMC_CMD_SET_RCA 3 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_SEND_CID 10 -#define MMC_CMD_SEND_STATUS 13 -#define MMC_CMD_SET_BLOCKLEN 16 -#define MMC_CMD_READ_BLOCK 17 -#define MMC_CMD_RD_BLK_MULTI 18 -#define MMC_CMD_WRITE_BLOCK 24 - -#define MMC_MAX_BLOCK_SIZE 512 - -#define MMC_R1_IDLE_STATE 0x01 -#define MMC_R1_ERASE_STATE 0x02 -#define MMC_R1_ILLEGAL_CMD 0x04 -#define MMC_R1_COM_CRC_ERR 0x08 -#define MMC_R1_ERASE_SEQ_ERR 0x01 -#define MMC_R1_ADDR_ERR 0x02 -#define MMC_R1_PARAM_ERR 0x04 - -#define MMC_R1B_WP_ERASE_SKIP 0x0002 -#define MMC_R1B_ERR 0x0004 -#define MMC_R1B_CC_ERR 0x0008 -#define MMC_R1B_CARD_ECC_ERR 0x0010 -#define MMC_R1B_WP_VIOLATION 0x0020 -#define MMC_R1B_ERASE_PARAM 0x0040 -#define MMC_R1B_OOR 0x0080 -#define MMC_R1B_IDLE_STATE 0x0100 -#define MMC_R1B_ERASE_RESET 0x0200 -#define MMC_R1B_ILLEGAL_CMD 0x0400 -#define MMC_R1B_COM_CRC_ERR 0x0800 -#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -#define MMC_R1B_ADDR_ERR 0x2000 -#define MMC_R1B_PARAM_ERR 0x4000 - -typedef struct mmc_cid { -/* FIXME: BYTE_ORDER */ - unsigned char year:4, - month:4; - unsigned char sn[3]; - unsigned char fwrev:4, - hwrev:4; - unsigned char name[6]; - unsigned char id[3]; -} mmc_cid_t; - -typedef struct mmc_csd -{ - unsigned char ecc:2, - file_format:2, - tmp_write_protect:1, - perm_write_protect:1, - copy:1, - file_format_grp:1; - unsigned long int content_prot_app:1, - rsvd3:4, - write_bl_partial:1, - write_bl_len:4, - r2w_factor:3, - default_ecc:2, - wp_grp_enable:1, - wp_grp_size:5, - erase_grp_mult:5, - erase_grp_size:5, - c_size_mult1:3, - vdd_w_curr_max:3, - vdd_w_curr_min:3, - vdd_r_curr_max:3, - vdd_r_curr_min:3, - c_size:12, - rsvd2:2, - dsr_imp:1, - read_blk_misalign:1, - write_blk_misalign:1, - read_bl_partial:1; - - unsigned short read_bl_len:4, - ccc:12; - unsigned char tran_speed; - unsigned char nsac; - unsigned char taac; - unsigned char rsvd1:2, - spec_vers:4, - csd_structure:2; -} mmc_csd_t; - - -#endif /* __MMC_PXA_P_H__ */ diff --git a/uart-monitor/include/asm/arch-omap3/mux.h b/uart-monitor/include/asm/arch-omap3/mux.h deleted file mode 120000 index a745fbd..0000000 --- a/uart-monitor/include/asm/arch-omap3/mux.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/mux.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/omap3430.h b/uart-monitor/include/asm/arch-omap3/omap3430.h deleted file mode 120000 index 69502f2..0000000 --- a/uart-monitor/include/asm/arch-omap3/omap3430.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/omap3430.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/rev.h b/uart-monitor/include/asm/arch-omap3/rev.h deleted file mode 120000 index 66918c9..0000000 --- a/uart-monitor/include/asm/arch-omap3/rev.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/rev.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/sizes.h b/uart-monitor/include/asm/arch-omap3/sizes.h deleted file mode 120000 index 4eda715..0000000 --- a/uart-monitor/include/asm/arch-omap3/sizes.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/sizes.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/sys_info.h b/uart-monitor/include/asm/arch-omap3/sys_info.h deleted file mode 120000 index 2e4d1d0..0000000 --- a/uart-monitor/include/asm/arch-omap3/sys_info.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/sys_info.h \ No newline at end of file diff --git a/uart-monitor/include/asm/arch-omap3/sys_proto.h b/uart-monitor/include/asm/arch-omap3/sys_proto.h deleted file mode 120000 index 3a032c8..0000000 --- a/uart-monitor/include/asm/arch-omap3/sys_proto.h +++ /dev/null @@ -1 +0,0 @@ -../../../../u-boot/include/asm-arm/arch-omap3/sys_proto.h \ No newline at end of file diff --git a/uart-monitor/include/asm/atomic.h b/uart-monitor/include/asm/atomic.h deleted file mode 100644 index ba9e4b7..0000000 --- a/uart-monitor/include/asm/atomic.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/include/asm-arm/atomic.h - * - * Copyright (c) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - * 13-04-1997 RMK Made functions atomic! - * 07-12-1997 RMK Upgraded for v2.1. - * 26-08-1998 PJB Added #ifdef __KERNEL__ - */ -#ifndef __ASM_ARM_ATOMIC_H -#define __ASM_ARM_ATOMIC_H - -#include - -#ifdef CONFIG_SMP -#error SMP not supported -#endif - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ -#include - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) - -static inline void atomic_add(int i, volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter += i; - local_irq_restore(flags); -} - -static inline void atomic_sub(int i, volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter -= i; - local_irq_restore(flags); -} - -static inline void atomic_inc(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter += 1; - local_irq_restore(flags); -} - -static inline void atomic_dec(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - v->counter -= 1; - local_irq_restore(flags); -} - -static inline int atomic_dec_and_test(volatile atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val -= 1; - local_irq_restore(flags); - - return val == 0; -} - -static inline int atomic_add_negative(int i, volatile atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val += i; - local_irq_restore(flags); - - return val < 0; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - local_irq_save(flags); - *addr &= ~mask; - local_irq_restore(flags); -} - -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#endif -#endif diff --git a/uart-monitor/include/asm/byteorder.h b/uart-monitor/include/asm/byteorder.h deleted file mode 120000 index be6afe8..0000000 --- a/uart-monitor/include/asm/byteorder.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/asm-arm/byteorder.h \ No newline at end of file diff --git a/uart-monitor/include/asm/posix_types.h b/uart-monitor/include/asm/posix_types.h deleted file mode 100644 index c412486..0000000 --- a/uart-monitor/include/asm/posix_types.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * linux/include/asm-arm/posix_types.h - * - * Copyright (C) 1996-1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - */ -#ifndef __ARCH_ARM_POSIX_TYPES_H -#define __ARCH_ARM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_dev_t; -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -#define __FD_SET(fd, fdsetp) \ - (((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31))) - -#undef __FD_CLR -#define __FD_CLR(fd, fdsetp) \ - (((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31))) - -#undef __FD_ISSET -#define __FD_ISSET(fd, fdsetp) \ - ((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) \ - (memset (fdsetp, 0, sizeof (*(fd_set *)fdsetp))) - -#endif - -#endif diff --git a/uart-monitor/include/asm/setup.h b/uart-monitor/include/asm/setup.h deleted file mode 100644 index 89df4dc..0000000 --- a/uart-monitor/include/asm/setup.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * linux/include/asm/setup.h - * - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Structure passed to kernel to tell it about the - * hardware it's running on. See linux/Documentation/arm/Setup - * for more info. - * - * NOTE: - * This file contains two ways to pass information from the boot - * loader to the kernel. The old struct param_struct is deprecated, - * but it will be kept in the kernel for 5 years from now - * (2001). This will allow boot loaders to convert to the new struct - * tag way. - */ -#ifndef __ASMARM_SETUP_H -#define __ASMARM_SETUP_H - -/* - * Usage: - * - do not go blindly adding fields, add them at the end - * - when adding fields, don't rely on the address until - * a patch from me has been released - * - unused fields should be zero (for future expansion) - * - this structure is relatively short-lived - only - * guaranteed to contain useful data in setup_arch() - */ -#define COMMAND_LINE_SIZE 1024 - -/* This is the old deprecated way to pass parameters to the kernel */ -struct param_struct { - union { - struct { - unsigned long page_size; /* 0 */ - unsigned long nr_pages; /* 4 */ - unsigned long ramdisk_size; /* 8 */ - unsigned long flags; /* 12 */ -#define FLAG_READONLY 1 -#define FLAG_RDLOAD 4 -#define FLAG_RDPROMPT 8 - unsigned long rootdev; /* 16 */ - unsigned long video_num_cols; /* 20 */ - unsigned long video_num_rows; /* 24 */ - unsigned long video_x; /* 28 */ - unsigned long video_y; /* 32 */ - unsigned long memc_control_reg; /* 36 */ - unsigned char sounddefault; /* 40 */ - unsigned char adfsdrives; /* 41 */ - unsigned char bytes_per_char_h; /* 42 */ - unsigned char bytes_per_char_v; /* 43 */ - unsigned long pages_in_bank[4]; /* 44 */ - unsigned long pages_in_vram; /* 60 */ - unsigned long initrd_start; /* 64 */ - unsigned long initrd_size; /* 68 */ - unsigned long rd_start; /* 72 */ - unsigned long system_rev; /* 76 */ - unsigned long system_serial_low; /* 80 */ - unsigned long system_serial_high; /* 84 */ - unsigned long mem_fclk_21285; /* 88 */ - } s; - char unused[256]; - } u1; - union { - char paths[8][128]; - struct { - unsigned long magic; - char n[1024 - sizeof(unsigned long)]; - } s; - } u2; - char commandline[COMMAND_LINE_SIZE]; -}; - - -/* - * The new way of passing information: a list of tagged entries - */ - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - u32 size; - u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - u32 flags; /* bit 0 = read-only */ - u32 pagesize; - u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - u32 size; - u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - u8 x; - u8 y; - u16 video_page; - u8 video_mode; - u8 video_cols; - u16 video_ega_bx; - u8 video_lines; - u8 video_isvga; - u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - u32 flags; /* bit 0 = load, bit 1 = prompt */ - u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* describes where the compressed ramdisk image lives (virtual address) */ -/* - * this one accidentally used virtual addresses - as such, - * its depreciated. - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - u32 start; /* physical start address */ - u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - u32 low; - u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - u16 lfb_width; - u16 lfb_height; - u16 lfb_depth; - u16 lfb_linelength; - u32 lfb_base; - u32 lfb_size; - u8 red_size; - u8 red_pos; - u8 green_size; - u8 green_pos; - u8 blue_size; - u8 blue_pos; - u8 rsvd_size; - u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* acorn RiscPC specific information */ -#define ATAG_ACORN 0x41000101 - -struct tag_acorn { - u32 memc_control_reg; - u32 vram_pages; - u8 sounddefault; - u8 adfsdrives; -}; - -/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ -#define ATAG_MEMCLK 0x41000402 - -struct tag_memclk { - u32 fmemclk; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - - /* - * Acorn specific - */ - struct tag_acorn acorn; - - /* - * DC21285 specific - */ - struct tag_memclk memclk; - } u; -}; - -struct tagtable { - u32 tag; - int (*parse)(const struct tag *); -}; - -#define __tag __attribute__((unused, __section__(".taglist"))) -#define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -/* - * Memory map description - */ -#define NR_BANKS 8 - -struct meminfo { - int nr_banks; - unsigned long end; - struct { - unsigned long start; - unsigned long size; - int node; - } bank[NR_BANKS]; -}; - -extern struct meminfo meminfo; - -#endif diff --git a/uart-monitor/include/asm/sizes.h b/uart-monitor/include/asm/sizes.h deleted file mode 100644 index f8d92ca..0000000 --- a/uart-monitor/include/asm/sizes.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ diff --git a/uart-monitor/include/asm/string.h b/uart-monitor/include/asm/string.h deleted file mode 100644 index c3ea582..0000000 --- a/uart-monitor/include/asm/string.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_ARM_STRING_H -#define __ASM_ARM_STRING_H - -/* - * We don't do inline string functions, since the - * optimised inline asm versions are not small. - */ - -#undef __HAVE_ARCH_STRRCHR -extern char * strrchr(const char * s, int c); - -#undef __HAVE_ARCH_STRCHR -extern char * strchr(const char * s, int c); - -#undef __HAVE_ARCH_MEMCPY -extern void * memcpy(void *, const void *, __kernel_size_t); - -#undef __HAVE_ARCH_MEMMOVE -extern void * memmove(void *, const void *, __kernel_size_t); - -#undef __HAVE_ARCH_MEMCHR -extern void * memchr(const void *, int, __kernel_size_t); - -#undef __HAVE_ARCH_MEMZERO -#undef __HAVE_ARCH_MEMSET -extern void * memset(void *, int, __kernel_size_t); - -#if 0 -extern void __memzero(void *ptr, __kernel_size_t n); - -#define memset(p,v,n) \ - ({ \ - if ((n) != 0) { \ - if (__builtin_constant_p((v)) && (v) == 0) \ - __memzero((p),(n)); \ - else \ - memset((p),(v),(n)); \ - } \ - (p); \ - }) - -#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); }) -#else -extern void memzero(void *ptr, __kernel_size_t n); -#endif - -#endif diff --git a/uart-monitor/include/asm/types.h b/uart-monitor/include/asm/types.h deleted file mode 100644 index 13e9806..0000000 --- a/uart-monitor/include/asm/types.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -typedef unsigned short umode_t; - -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __signed__ long long __s64; -typedef unsigned long long __u64; -#endif - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - -#define BITS_PER_LONG 32 - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#endif /* __KERNEL__ */ - -#endif diff --git a/uart-monitor/include/asm/x-load-arm.h b/uart-monitor/include/asm/x-load-arm.h deleted file mode 100644 index eef268e..0000000 --- a/uart-monitor/include/asm/x-load-arm.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _X_LOAD_ARM_H_ -#define _X_LOAD_ARM_H_ 1 - -/* for the following variables, see start.S */ -extern ulong _armboot_start; /* code start */ -extern ulong _bss_start; /* code + data end == BSS start */ -extern ulong _bss_end; /* BSS end */ - -#endif /* _X_LOAD_ARM_H_ */ diff --git a/uart-monitor/include/command.h b/uart-monitor/include/command.h deleted file mode 120000 index f4bd05e..0000000 --- a/uart-monitor/include/command.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/command.h \ No newline at end of file diff --git a/uart-monitor/include/common.h b/uart-monitor/include/common.h deleted file mode 100644 index fe8bc90..0000000 --- a/uart-monitor/include/common.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __COMMON_H_ -#define __COMMON_H_ 1 - -#undef _LINUX_CONFIG_H -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - -typedef unsigned char uchar; -typedef volatile unsigned long vu_long; -typedef volatile unsigned short vu_short; -typedef volatile unsigned char vu_char; - -#include -#include -#include - -#ifdef CONFIG_ARM -#define asmlinkage /* nothing */ -#endif - - -#ifdef CONFIG_ARM -# include -# include /* ARM version to be fixed! */ -#endif /* CONFIG_ARM */ - -#ifdef CFG_PRINTF -#define printf(fmt,args...) serial_printf (fmt ,##args) -#define getc() serial_getc() -#else -#define printf(fmt,args...) -#define getc() ' ' -#endif /* CFG_PRINTF */ - -/* board/$(BOARD)/$(BOARD).c */ -int board_init (void); -int nand_init (void); -int mmc_boot (void); -void board_hang (void); - -/* cpu/$(CPU)/cpu.c */ -int cpu_init (void); -#ifdef CFG_UDELAY -void udelay (unsigned long usec); -#endif - -/* nand driver */ -#define NAND_CMD_READ0 0 -#define NAND_CMD_READ1 1 -#define NAND_CMD_READOOB 0x50 -#define NAND_CMD_STATUS 0x70 -#define NAND_CMD_READID 0x90 -#define NAND_CMD_RESET 0xff - -/* Extended Commands for Large page devices */ -#define NAND_CMD_READSTART 0x30 - -int nand_chip(void); -int nand_read_block(uchar *buf, ulong block_addr); - -int onenand_chip(void); -int onenand_read_block(unsigned char *buf, ulong block); - - -#ifdef CFG_PRINTF - -/* serial driver */ -int serial_init (void); -void serial_setbrg (void); -void serial_putc (const char); -void serial_puts (const char *); -int serial_getc (void); -int serial_tstc (void); - -/* lib/printf.c */ -void serial_printf (const char *fmt, ...); -#endif - -/* lib/crc.c */ -void nand_calculate_ecc (const u_char *dat, u_char *ecc_code); -int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc); - -/* lib/board.c */ -void hang (void) __attribute__ ((noreturn)); -#endif /* __COMMON_H_ */ diff --git a/uart-monitor/include/configs/omap3430labrador.h b/uart-monitor/include/configs/omap3430labrador.h deleted file mode 100644 index 53b72f1..0000000 --- a/uart-monitor/include/configs/omap3430labrador.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * (C) Copyright 2006 - * Texas Instruments - * Richard Woodruff - * - * X-Loader Configuation settings for the TI OMAP SDP3430 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* configure for GTA04 with DM3730 */ -#define CONFIG_OMAP36XX 1 /* or 36XX (DM3730) */ -#define PRCM_CLK_CFG2_400MHZ 1 - -/* serial printf facility takes about 3.5K */ -#define CFG_PRINTF -//#undef CFG_PRINTF - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_3430LABRADOR 1 /* working on Labrador */ -//#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */ - -#include /* get chip and board defs */ - -/* uncomment it if you need timer based udelay(). it takes about 250 bytes */ -//#define CFG_UDELAY - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -//#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */ -#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */ -#define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */ - -/* Memory type */ -#define CFG_3430SDRAM_DDR 1 - -/* The actual register values are defined in u-boot- mem.h */ -/* SDRAM Bank Allocation method */ -//#define SDRC_B_R_C 1 -//#define SDRC_B1_R_B0_C 1 -#define SDRC_R_B_C 1 - -/* Boot type */ -#define CFG_NAND 1 -//#define CFG_ONENAND 1 - -# define NAND_BASE_ADR NAND_BASE /* NAND flash */ -# define ONENAND_BASE ONENAND_MAP /* OneNand flash */ - -/* To use the 256/512 byte s/w ecc define CFG_SW_ECC_(256/512) */ -/* Use the 512 byte hw ecc in rom code layout */ -#define NAND_HW_ROMCODE_ECC_LAYOUT - -#ifdef CFG_NAND -#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M /* u = ofdon't need so much for nand port */ -#define OMAP34XX_GPMC_CS0_MAP NAND_BASE_ADR -#else -#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M -#define OMAP34XX_GPMC_CS0_MAP ONENAND_BASE -#define ONENAND_ADDR ONENAND_BASE /* physical address of OneNAND at CS0*/ -#endif - - -#ifdef CFG_PRINTF - -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (48000000) -#define CFG_NS16550_COM3 OMAP34XX_UART3 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL3 3 /* UART3 on board */ -#define CONFIG_CONS_INDEX 3 - -#define CONFIG_BAUDRATE 115200 -#define CFG_PBSIZE 256 - -#endif /* CFG_PRINTF */ - -/* - * Miscellaneous configurable options - */ -#define CFG_LOADADDR 0x80008000 - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -#ifdef CFG_NAND - -/*----------------------------------------------------------------------- - * Board NAND Info. - */ - - -#define CFG_NAND_K9F1G08R0A /* Micron 16-bit 256MB chip large page NAND chip*/ -#define NAND_16BIT - -/* NAND is partitioned: - * 0x00000000 - 0x0007FFFF Booting Image - * 0x00080000 - 0x000BFFFF U-Boot Image - * 0x000C0000 - 0x000FFFFF U-Boot Env Data (X-loader doesn't care) - * 0x00100000 - 0x002FFFFF Kernel Image - * 0x00300000 - 0x08000000 depends on application - */ -#define NAND_UBOOT_START 0x0080000 /* Leaving first 4 blocks for x-load */ -#define NAND_UBOOT_END 0x00C0000 /* Giving a space of 2 blocks = 256KB */ -#define NAND_BLOCK_SIZE 0x20000 - -#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50) -#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE+0x7C) -#define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE+0x80) -#define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE+0x84) - -#ifdef NAND_16BIT -#define WRITE_NAND_COMMAND(d, adr) \ - do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d;} while(0) -#define WRITE_NAND_ADDRESS(d, adr) \ - do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d;} while(0) -#define WRITE_NAND(d, adr) \ - do {*(volatile u16 *)GPMC_NAND_DATA_0 = d;} while(0) -#define READ_NAND(adr) \ - (*(volatile u16 *)GPMC_NAND_DATA_0) -#define NAND_WAIT_READY() -#define NAND_WP_OFF() \ - do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) -#define NAND_WP_ON() \ - do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) - -#else /* to support 8-bit NAND devices */ -#define WRITE_NAND_COMMAND(d, adr) \ - do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d;} while(0) -#define WRITE_NAND_ADDRESS(d, adr) \ - do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d;} while(0) -#define WRITE_NAND(d, adr) \ - do {*(volatile u8 *)GPMC_NAND_DATA_0 = d;} while(0) -#define READ_NAND(adr) \ - (*(volatile u8 *)GPMC_NAND_DATA_0); -#define NAND_WAIT_READY() -#define NAND_WP_OFF() \ - do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) -#define NAND_WP_ON() \ - do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) - -#endif - -#define NAND_CTL_CLRALE(adr) -#define NAND_CTL_SETALE(adr) -#define NAND_CTL_CLRCLE(adr) -#define NAND_CTL_SETCLE(adr) -#define NAND_DISABLE_CE() -#define NAND_ENABLE_CE() - -#else -/*----------------------------------------------------------------------- - * Board oneNAND Info. - */ -#define CFG_SYNC_BURST_READ 1 - -/* OneNAND is partitioned: - * 0x0000000 - 0x0080000 X-Loader - * 0x0080000 - 0x00c0000 U-boot Image - * 0x00c0000 - 0x00e0000 U-Boot Env Data (X-loader doesn't care) - * 0x00e0000 - 0x0120000 Kernel Image - * 0x0120000 - 0x4000000 depends on application - */ - -#define ONENAND_START_BLOCK 4 -#define ONENAND_END_BLOCK 6 -#define ONENAND_PAGE_SIZE 2048 /* 2KB */ -#define ONENAND_BLOCK_SIZE 0x20000 /* 128KB */ - -#endif /* oneNAND */ - -/* Enable CONFIG_MMC macro if MMC boot support is required */ -/* if loadb and MMC support are enabled together, the size of x-loader - (code + data) becomes greater than 32K - the size of SRAM. So don't enable - them together. - */ -#if !defined(START_LOADB_DOWNLOAD) -#define CONFIG_MMC 1 -#endif -#if defined(CONFIG_MMC) - #define CFG_CMD_MMC 1 - #define CFG_CMD_FAT 1 -#endif - -#endif /* __CONFIG_H */ - diff --git a/uart-monitor/include/fat.h b/uart-monitor/include/fat.h deleted file mode 120000 index aeeb5a0..0000000 --- a/uart-monitor/include/fat.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/fat.h \ No newline at end of file diff --git a/uart-monitor/include/ide.h b/uart-monitor/include/ide.h deleted file mode 120000 index 9c84a17..0000000 --- a/uart-monitor/include/ide.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/ide.h \ No newline at end of file diff --git a/uart-monitor/include/linux/byteorder b/uart-monitor/include/linux/byteorder deleted file mode 120000 index f000c3b..0000000 --- a/uart-monitor/include/linux/byteorder +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/linux/byteorder \ No newline at end of file diff --git a/uart-monitor/include/linux/config.h b/uart-monitor/include/linux/config.h deleted file mode 100644 index a0194cb..0000000 --- a/uart-monitor/include/linux/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _LINUX_CONFIG_H -#define _LINUX_CONFIG_H - -/* #include */ - -#endif diff --git a/uart-monitor/include/linux/posix_types.h b/uart-monitor/include/linux/posix_types.h deleted file mode 100644 index bd37e1f..0000000 --- a/uart-monitor/include/linux/posix_types.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _LINUX_POSIX_TYPES_H -#define _LINUX_POSIX_TYPES_H - -#include - -/* - * This allows for 1024 file descriptors: if NR_OPEN is ever grown - * beyond that you'll have to change this too. But 1024 fd's seem to be - * enough even for such "real" unices like OSF/1, so hopefully this is - * one limit that doesn't have to be changed [again]. - * - * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in - * (and thus ) - but this is a more logical - * place for them. Solved by having dummy defines in . - */ - -/* - * Those macros may have been defined in . But we always - * use the ones here. - */ -#undef __NFDBITS -#define __NFDBITS (8 * sizeof(unsigned long)) - -#undef __FD_SETSIZE -#define __FD_SETSIZE 1024 - -#undef __FDSET_LONGS -#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS) - -#undef __FDELT -#define __FDELT(d) ((d) / __NFDBITS) - -#undef __FDMASK -#define __FDMASK(d) (1UL << ((d) % __NFDBITS)) - -typedef struct { - unsigned long fds_bits [__FDSET_LONGS]; -} __kernel_fd_set; - -/* Type of a signal handler. */ -typedef void (*__kernel_sighandler_t)(int); - -/* Type of a SYSV IPC key. */ -typedef int __kernel_key_t; - -#include - -#endif /* _LINUX_POSIX_TYPES_H */ diff --git a/uart-monitor/include/linux/stat.h b/uart-monitor/include/linux/stat.h deleted file mode 120000 index 3bc0369..0000000 --- a/uart-monitor/include/linux/stat.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/linux/stat.h \ No newline at end of file diff --git a/uart-monitor/include/linux/stddef.h b/uart-monitor/include/linux/stddef.h deleted file mode 100644 index 81e34c2..0000000 --- a/uart-monitor/include/linux/stddef.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _LINUX_STDDEF_H -#define _LINUX_STDDEF_H - -#undef NULL -#if defined(__cplusplus) -#define NULL 0 -#else -#define NULL ((void *)0) -#endif - -#ifndef _SIZE_T -#include -#endif - -#undef offsetof -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - -#endif diff --git a/uart-monitor/include/linux/time.h b/uart-monitor/include/linux/time.h deleted file mode 120000 index d630a65..0000000 --- a/uart-monitor/include/linux/time.h +++ /dev/null @@ -1 +0,0 @@ -../../../u-boot/include/linux/time.h \ No newline at end of file diff --git a/uart-monitor/include/linux/types.h b/uart-monitor/include/linux/types.h deleted file mode 100644 index df4808f..0000000 --- a/uart-monitor/include/linux/types.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef _LINUX_TYPES_H -#define _LINUX_TYPES_H - -#ifdef __KERNEL__ -#include -#endif - -#include -#include - -#ifndef __KERNEL_STRICT_NAMES - -typedef __kernel_fd_set fd_set; -typedef __kernel_dev_t dev_t; -typedef __kernel_ino_t ino_t; -typedef __kernel_mode_t mode_t; -typedef __kernel_nlink_t nlink_t; -typedef __kernel_off_t off_t; -typedef __kernel_pid_t pid_t; -typedef __kernel_daddr_t daddr_t; -typedef __kernel_key_t key_t; -typedef __kernel_suseconds_t suseconds_t; - -#ifdef __KERNEL__ -typedef __kernel_uid32_t uid_t; -typedef __kernel_gid32_t gid_t; -typedef __kernel_uid16_t uid16_t; -typedef __kernel_gid16_t gid16_t; - -#ifdef CONFIG_UID16 -/* This is defined by include/asm-{arch}/posix_types.h */ -typedef __kernel_old_uid_t old_uid_t; -typedef __kernel_old_gid_t old_gid_t; -#endif /* CONFIG_UID16 */ - -/* libc5 includes this file to define uid_t, thus uid_t can never change - * when it is included by non-kernel code - */ -#else -typedef __kernel_uid_t uid_t; -typedef __kernel_gid_t gid_t; -#endif /* __KERNEL__ */ - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __kernel_loff_t loff_t; -#endif - -/* - * The following typedefs are also protected by individual ifdefs for - * historical reasons: - */ -#ifndef _SIZE_T -#define _SIZE_T -typedef __kernel_size_t size_t; -#endif - -#ifndef _SSIZE_T -#define _SSIZE_T -typedef __kernel_ssize_t ssize_t; -#endif - -#ifndef _PTRDIFF_T -#define _PTRDIFF_T -typedef __kernel_ptrdiff_t ptrdiff_t; -#endif - -#ifndef _TIME_T -#define _TIME_T -typedef __kernel_time_t time_t; -#endif - -#ifndef _CLOCK_T -#define _CLOCK_T -typedef __kernel_clock_t clock_t; -#endif - -#ifndef _CADDR_T -#define _CADDR_T -typedef __kernel_caddr_t caddr_t; -#endif - -/* bsd */ -typedef unsigned char u_char; -typedef unsigned short u_short; -typedef unsigned int u_int; -typedef unsigned long u_long; - -/* sysv */ -typedef unsigned char unchar; -typedef unsigned short ushort; -typedef unsigned int uint; -typedef unsigned long ulong; - -#ifndef __BIT_TYPES_DEFINED__ -#define __BIT_TYPES_DEFINED__ - -typedef __u8 u_int8_t; -typedef __s8 int8_t; -typedef __u16 u_int16_t; -typedef __s16 int16_t; -typedef __u32 u_int32_t; -typedef __s32 int32_t; - -#endif /* !(__BIT_TYPES_DEFINED__) */ - -typedef __u8 uint8_t; -typedef __u16 uint16_t; -typedef __u32 uint32_t; - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __u64 uint64_t; -typedef __u64 u_int64_t; -typedef __s64 int64_t; -#endif - -#endif /* __KERNEL_STRICT_NAMES */ - -/* - * Below are truly Linux-specific types that should never collide with - * any application/library that wants linux/types.h. - */ - -struct ustat { - __kernel_daddr_t f_tfree; - __kernel_ino_t f_tinode; - char f_fname[6]; - char f_fpack[6]; -}; - -#endif /* _LINUX_TYPES_H */ diff --git a/uart-monitor/include/malloc.h b/uart-monitor/include/malloc.h deleted file mode 120000 index 9e84013..0000000 --- a/uart-monitor/include/malloc.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/malloc.h \ No newline at end of file diff --git a/uart-monitor/include/mmc.h b/uart-monitor/include/mmc.h deleted file mode 120000 index 1e59fb9..0000000 --- a/uart-monitor/include/mmc.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/mmc.h \ No newline at end of file diff --git a/uart-monitor/include/ns16550.h b/uart-monitor/include/ns16550.h deleted file mode 100644 index 36d2d40..0000000 --- a/uart-monitor/include/ns16550.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - *This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * NS16550 Serial Port - * originally from linux source (arch/ppc/boot/ns16550.h) - * modified slightly to - * have addresses as offsets from CFG_ISA_BASE - * added a few more definitions - * added prototypes for ns16550.c - * reduced no of com ports to 2 - * modifications (c) Rob Taylor, Flying Pig Systems. 2000. - */ - -#if (CFG_NS16550_REG_SIZE == 1) -struct NS16550 { - unsigned char rbr; /* 0 */ - unsigned char ier; /* 1 */ - unsigned char fcr; /* 2 */ - unsigned char lcr; /* 3 */ - unsigned char mcr; /* 4 */ - unsigned char lsr; /* 5 */ - unsigned char msr; /* 6 */ - unsigned char scr; /* 7 */ -} __attribute__ ((packed)); -#elif (CFG_NS16550_REG_SIZE == 2) -struct NS16550 { - unsigned short rbr; /* 0 */ - unsigned short ier; /* 1 */ - unsigned short fcr; /* 2 */ - unsigned short lcr; /* 3 */ - unsigned short mcr; /* 4 */ - unsigned short lsr; /* 5 */ - unsigned short msr; /* 6 */ - unsigned short scr; /* 7 */ -} __attribute__ ((packed)); -#elif (CFG_NS16550_REG_SIZE == 4) -struct NS16550 { - unsigned long rbr; /* 0 */ - unsigned long ier; /* 1 */ - unsigned long fcr; /* 2 */ - unsigned long lcr; /* 3 */ - unsigned long mcr; /* 4 */ - unsigned long lsr; /* 5 */ - unsigned long msr; /* 6 */ - unsigned long scr; /* 7 */ -} __attribute__ ((packed)); -#elif (CFG_NS16550_REG_SIZE == -4) -struct NS16550 { - unsigned char rbr; /* 0 */ - int pad1:24; - unsigned char ier; /* 1 */ - int pad2:24; - unsigned char fcr; /* 2 */ - int pad3:24; - unsigned char lcr; /* 3 */ - int pad4:24; - unsigned char mcr; /* 4 */ - int pad5:24; - unsigned char lsr; /* 5 */ - int pad6:24; - unsigned char msr; /* 6 */ - int pad7:24; - unsigned char scr; /* 7 */ - int pad8:24; -#if defined(CONFIG_OMAP) - unsigned char mdr1; /* mode select reset TL16C750*/ -#endif -#ifdef CONFIG_OMAP1510 - int pad9:24; - unsigned long pad[10]; - unsigned char osc_12m_sel; - int pad10:24; -#endif -} __attribute__ ((packed)); -#else -#error "Please define NS16550 registers size." -#endif - -#define thr rbr -#define iir fcr -#define dll rbr -#define dlm ier - -typedef volatile struct NS16550 *NS16550_t; - -#define FCR_FIFO_EN 0x01 /* Fifo enable */ -#define FCR_RXSR 0x02 /* Receiver soft reset */ -#define FCR_TXSR 0x04 /* Transmitter soft reset */ - -#define MCR_DTR 0x01 -#define MCR_RTS 0x02 -#define MCR_DMA_EN 0x04 -#define MCR_TX_DFR 0x08 - -#define LCR_WLS_MSK 0x03 /* character length slect mask */ -#define LCR_WLS_5 0x00 /* 5 bit character length */ -#define LCR_WLS_6 0x01 /* 6 bit character length */ -#define LCR_WLS_7 0x02 /* 7 bit character length */ -#define LCR_WLS_8 0x03 /* 8 bit character length */ -#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define LCR_PEN 0x08 /* Parity eneble */ -#define LCR_EPS 0x10 /* Even Parity Select */ -#define LCR_STKP 0x20 /* Stick Parity */ -#define LCR_SBRK 0x40 /* Set Break */ -#define LCR_BKSE 0x80 /* Bank select enable */ - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -#ifdef CONFIG_OMAP1510 -#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */ -#endif - -/* useful defaults for LCR */ -#define LCR_8N1 0x03 - -void NS16550_init (NS16550_t com_port, int baud_divisor); -void NS16550_putc (NS16550_t com_port, char c); -char NS16550_getc (NS16550_t com_port); -int NS16550_tstc (NS16550_t com_port); -void NS16550_reinit (NS16550_t com_port, int baud_divisor); diff --git a/uart-monitor/include/part.h b/uart-monitor/include/part.h deleted file mode 120000 index 766e417..0000000 --- a/uart-monitor/include/part.h +++ /dev/null @@ -1 +0,0 @@ -../../u-boot/include/part.h \ No newline at end of file diff --git a/uart-monitor/lib/Makefile b/uart-monitor/lib/Makefile deleted file mode 100644 index 341cd54..0000000 --- a/uart-monitor/lib/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# (C) Copyright 2004 Texas Instruments -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = lib$(ARCH).a - -AOBJS = _udivsi3.o _umodsi3.o - -COBJS = board.o ecc_256.o ecc_512.o printf.o div0.o - -OBJS = $(AOBJS) $(COBJS) - -$(LIB): .depend $(OBJS) - $(AR) crv $@ $(OBJS) - -######################################################################### - -.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) - $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ - -sinclude .depend - -######################################################################### diff --git a/uart-monitor/lib/_udivsi3.S b/uart-monitor/lib/_udivsi3.S deleted file mode 100644 index 2cdcd48..0000000 --- a/uart-monitor/lib/_udivsi3.S +++ /dev/null @@ -1,77 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -dividend .req r0 -divisor .req r1 -result .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __udivsi3 - .type __udivsi3 ,function - .align 0 - __udivsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - mov result, #0 - cmp dividend, divisor - bcc Lgot_result -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions, and note which bits - @ are done in the result. On the final pass, this may subtract - @ too much from the dividend, but the result will be ok, since the - @ "bit" will have been shifted out at the bottom. - cmp dividend, divisor - subcs dividend, dividend, divisor - orrcs result, result, curbit - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs result, result, curbit, lsr #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs result, result, curbit, lsr #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs result, result, curbit, lsr #3 - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 -Lgot_result: - mov r0, result - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __udivsi3 , . - __udivsi3 -/* # 235 "libgcc1.S" */ -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/uart-monitor/lib/_umodsi3.S b/uart-monitor/lib/_umodsi3.S deleted file mode 100644 index e4aebe8..0000000 --- a/uart-monitor/lib/_umodsi3.S +++ /dev/null @@ -1,88 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -/* # 145 "libgcc1.S" */ -dividend .req r0 -divisor .req r1 -overdone .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __umodsi3 - .type __umodsi3 ,function - .align 0 - __umodsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - cmp dividend, divisor - movcc pc, lr -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions. On the final pass, this may - @ subtract too much from the dividend, so keep track of which - @ subtractions are done, we can fix them up afterwards... - mov overdone, #0 - cmp dividend, divisor - subcs dividend, dividend, divisor - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs overdone, overdone, curbit, ror #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs overdone, overdone, curbit, ror #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs overdone, overdone, curbit, ror #3 - mov ip, curbit - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 - @ Any subtractions that we should not have done will be recorded in - @ the top three bits of "overdone". Exactly which were not needed - @ are governed by the position of the bit, stored in ip. - @ If we terminated early, because dividend became zero, - @ then none of the below will match, since the bit in ip will not be - @ in the bottom nibble. - ands overdone, overdone, #0xe0000000 - moveq pc, lr @ No fixups needed - tst overdone, ip, ror #3 - addne dividend, dividend, divisor, lsr #3 - tst overdone, ip, ror #2 - addne dividend, dividend, divisor, lsr #2 - tst overdone, ip, ror #1 - addne dividend, dividend, divisor, lsr #1 - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __umodsi3 , . - __umodsi3 -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/uart-monitor/lib/board.c b/uart-monitor/lib/board.c deleted file mode 100644 index 9d3e7f9..0000000 --- a/uart-monitor/lib/board.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright (C) 2005 Texas Instruments. - * - * (C) Copyright 2004 - * Jian Zhang, Texas Instruments, jzhang@ti.com. - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#ifdef CFG_PRINTF -int print_info(void) -{ - printf ("\n\nTexas Instruments X-Loader 1.41 (" - __DATE__ " - " __TIME__ ")\n"); - return 0; -} -#endif -typedef int (init_fnc_t) (void); - -init_fnc_t *init_sequence[] = { - cpu_init, /* basic cpu dependent setup */ - board_init, /* basic board dependent setup */ -#ifdef CFG_PRINTF - serial_init, /* serial communications setup */ - print_info, -#endif - nand_init, /* board specific nand init */ - NULL, -}; - -#ifdef CFG_CMD_FAT -extern char * strcpy(char * dest,const char *src); -#else -char * strcpy(char * dest,const char *src) -{ - char *tmp = dest; - - while ((*dest++ = *src++) != '\0') - /* nothing */; - return tmp; -} -#endif - -#ifdef CONFIG_MMC -int mmc_read_bootloader(int dev, int part) -{ - long size; - unsigned long offset = CFG_LOADADDR; - block_dev_desc_t *dev_desc = NULL; - unsigned char ret = 0; - - ret = mmc_init(dev); - if (ret != 0){ - printf("\n MMC init failed \n"); - return -1; - } - - if (part) { /* FAT Read for extenal SD card */ - dev_desc = mmc_get_dev(dev); - size = file_fat_read("u-boot.bin", (unsigned char *)offset, 0); - if (size == -1) - return -1; - } else { /* RAW read for EMMC */ - ret = mmc_read(dev, 0x400, (unsigned char *)offset, 0x60000); - if (ret != 1) - return -1; - } - - return 0; -} -#endif - -extern int do_load_serial_bin(ulong offset, int baudrate); - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) - -void start_armboot (void) -{ - init_fnc_t **init_fnc_ptr; - int i; - uchar *buf; - char boot_dev_name[8]; - u32 boot_device = 0; - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } -#ifdef START_LOADB_DOWNLOAD - strcpy(boot_dev_name, "UART"); - do_load_serial_bin (CFG_LOADADDR, 115200); -#else - /* Read boot device from saved scratch pad */ - boot_device = __raw_readl(0x480029c0) & 0xff; - buf = (uchar*) CFG_LOADADDR; - - switch(boot_device) { - case 0x03: - strcpy(boot_dev_name, "ONENAND"); -#if defined(CFG_ONENAND) - for (i = ONENAND_START_BLOCK; i < ONENAND_END_BLOCK; i++) { - if (!onenand_read_block(buf, i)) - buf += ONENAND_BLOCK_SIZE; - else - goto error; - } -#endif - break; - case 0x02: - default: - strcpy(boot_dev_name, "NAND"); -#if defined(CFG_NAND) - for (i = NAND_UBOOT_START; i < NAND_UBOOT_END; - i+= NAND_BLOCK_SIZE) { - if (!nand_read_block(buf, i)) - buf += NAND_BLOCK_SIZE; /* advance buf ptr */ - } -#endif - break; - case 0x05: - strcpy(boot_dev_name, "EMMC"); -#if defined(CONFIG_MMC) - if (mmc_read_bootloader(1, 0) != 0) - goto error; -#else - goto error; -#endif - break; - case 0x06: - strcpy(boot_dev_name, "MMC/SD1"); -#if defined(CONFIG_MMC) && defined(CFG_CMD_FAT) - if (mmc_read_bootloader(0, 1) != 0) - goto error; -#else - goto error; -#endif - break; - }; -#endif - /* go run U-Boot and never return */ - printf("Starting OS Bootloader from %s ...\n", boot_dev_name); - ((init_fnc_t *)CFG_LOADADDR)(); - - /* should never come here */ -#if defined(CFG_ONENAND) || defined(CONFIG_MMC) -error: -#endif - printf("Could not read bootloader!\n"); - hang(); -} - -void hang (void) -{ - /* call board specific hang function */ - board_hang(); - - /* if board_hang() returns, hange here */ - printf("X-Loader hangs\n"); - for (;;); -} diff --git a/uart-monitor/lib/div0.c b/uart-monitor/lib/div0.c deleted file mode 100644 index 6267bf1..0000000 --- a/uart-monitor/lib/div0.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* Replacement (=dummy) for GNU/Linux division-by zero handler */ -void __div0 (void) -{ - extern void hang (void); - - hang(); -} diff --git a/uart-monitor/lib/ecc_256.c b/uart-monitor/lib/ecc_256.c deleted file mode 100644 index 92c310f..0000000 --- a/uart-monitor/lib/ecc_256.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * (C) Copyright 2000 Texas Instruments - * - * This file os based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifndef CFG_SW_ECC_512 - -/* - * Pre-calculated 256-way 1 byte column parity - */ -static const u_char nand_ecc_precalc_table[] = { - 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00, - 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, - 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, - 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, - 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, - 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, - 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, - 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, - 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, - 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, - 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, - 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, - 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, - 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, - 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, - 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 -}; - - -#ifdef NAND_LEGACY -/* - * Creates non-inverted ECC code from line parity - */ -static void nand_trans_result(u_char reg2, u_char reg3, - u_char *ecc_code) -{ - u_char a, b, i, tmp1, tmp2; - - /* Initialize variables */ - a = b = 0x80; - tmp1 = tmp2 = 0; - - /* Calculate first ECC byte */ - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - a >>= 1; - } - - /* Calculate second ECC byte */ - b = 0x80; - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - a >>= 1; - } - - /* Store two of the ECC bytes */ - ecc_code[0] = tmp1; - ecc_code[1] = tmp2; -} - -/* - * Calculate 3 byte ECC code for 256 byte block - */ -/* ECC Calculation is different between NAND and NAND Legacy code - * in U-Boot. If NAND_LEGACY is enabled in u-boot it should be - * enabled in the config file in x-loader also - */ -void nand_calculate_ecc (const u_char *dat, u_char *ecc_code) -{ - u_char idx, reg1, reg3; - int j; - - /* Initialize variables */ - reg1 = reg3 = 0; - ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; - - /* Build up column parity */ - for(j = 0; j < 256; j++) { - - /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[dat[j]]; - reg1 ^= idx; - - /* All bit XOR = 1 ? */ - if (idx & 0x40) { - reg3 ^= (u_char) j; - - } - } - - /* Create non-inverted ECC code from line parity */ - nand_trans_result((reg1 & 0x40) ? ~reg3 : reg3, reg3, ecc_code); - - /* Calculate final ECC code */ - ecc_code[0] = ~ecc_code[0]; - ecc_code[1] = ~ecc_code[1]; - ecc_code[2] = ((~reg1) << 2) | 0x03; -} - -/* - * Detect and correct a 1 bit error for 256 byte block - */ -int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc) -{ - u_char a, b, c, d1, d2, d3, add, bit, i; - - /* Do error detection */ - d1 = calc_ecc[0] ^ read_ecc[0]; - d2 = calc_ecc[1] ^ read_ecc[1]; - d3 = calc_ecc[2] ^ read_ecc[2]; - - if ((d1 | d2 | d3) == 0) { - /* No errors */ - return 0; - } - else { - a = (d1 ^ (d1 >> 1)) & 0x55; - b = (d2 ^ (d2 >> 1)) & 0x55; - c = (d3 ^ (d3 >> 1)) & 0x54; - - /* Found and will correct single bit error in the data */ - if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { - c = 0x80; - add = 0; - a = 0x80; - for (i=0; i<4; i++) { - if (d1 & c) - add |= a; - c >>= 2; - a >>= 1; - } - c = 0x80; - for (i=0; i<4; i++) { - if (d2 & c) - add |= a; - c >>= 2; - a >>= 1; - } - bit = 0; - b = 0x04; - c = 0x80; - for (i=0; i<3; i++) { - if (d3 & c) - bit |= b; - c >>= 2; - b >>= 1; - } - b = 0x01; - a = dat[add]; - a ^= (b << bit); - dat[add] = a; - return 1; - } - else { - i = 0; - while (d1) { - if (d1 & 0x01) - ++i; - d1 >>= 1; - } - while (d2) { - if (d2 & 0x01) - ++i; - d2 >>= 1; - } - while (d3) { - if (d3 & 0x01) - ++i; - d3 >>= 1; - } - if (i == 1) { - /* ECC Code Error Correction */ - read_ecc[0] = calc_ecc[0]; - read_ecc[1] = calc_ecc[1]; - read_ecc[2] = calc_ecc[2]; - return 2; - } - else { - /* Uncorrectable Error */ - return -1; - } - } - } - - /* Should never happen */ - return -1; -} -#else /* not NAND_LEGACY */ -void nand_calculate_ecc(const u_char *dat, u_char *ecc_code) -{ - uint8_t idx, reg1, reg2, reg3, tmp1, tmp2; - int i; - - /* Initialize variables */ - reg1 = reg2 = reg3 = 0; - - /* Build up column parity */ - for(i = 0; i < 256; i++) { - /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[*dat++]; - reg1 ^= (idx & 0x3f); - - /* All bit XOR = 1 ? */ - if (idx & 0x40) { - reg3 ^= (uint8_t) i; - reg2 ^= ~((uint8_t) i); - } - } - - /* Create non-inverted ECC code from line parity */ - tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */ - tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */ - tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */ - tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */ - tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */ - tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */ - tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */ - tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */ - - tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */ - tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */ - tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */ - tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */ - tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */ - tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */ - tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */ - tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */ - - /* Calculate final ECC code */ - ecc_code[0] = ~tmp1; - ecc_code[1] = ~tmp2; - ecc_code[2] = ((~reg1) << 2) | 0x03; -} - -static inline int countbits(uint32_t byte) -{ - int res = 0; - - for (;byte; byte >>= 1) - res += byte & 0x01; - return res; -} - -/* - * nand_correct_data - [NAND Interface] Detect and correct bit error(s) - * @mtd: MTD block structure - * @dat: raw data read from the chip - * @read_ecc: ECC from the chip - * @calc_ecc: the ECC calculated from raw data - * - * Detect and correct a 1 bit error for 256 byte block - */ -int nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc) -{ - uint8_t s0, s1, s2; - - s0 = calc_ecc[0] ^ read_ecc[0]; - s1 = calc_ecc[1] ^ read_ecc[1]; - s2 = calc_ecc[2] ^ read_ecc[2]; - - if ((s0 | s1 | s2) == 0) - return 0; - -/* Check for a single bit error */ - if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 && - ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 && - ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) { - - uint32_t byteoffs, bitnum; - - byteoffs = (s1 << 0) & 0x80; - byteoffs |= (s1 << 1) & 0x40; - byteoffs |= (s1 << 2) & 0x20; - byteoffs |= (s1 << 3) & 0x10; - - byteoffs |= (s0 >> 4) & 0x08; - byteoffs |= (s0 >> 3) & 0x04; - byteoffs |= (s0 >> 2) & 0x02; - byteoffs |= (s0 >> 1) & 0x01; - - bitnum = (s2 >> 5) & 0x04; - bitnum |= (s2 >> 4) & 0x02; - bitnum |= (s2 >> 3) & 0x01; - - dat[byteoffs] ^= (1 << bitnum); - - return 1; - } - - if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) - return 1; - - return -1; -} -#endif /* NAND_LEGACY */ -#endif /* ! CFG_SW_ECC_512 */ diff --git a/uart-monitor/lib/ecc_512.c b/uart-monitor/lib/ecc_512.c deleted file mode 100644 index 29647c6..0000000 --- a/uart-monitor/lib/ecc_512.c +++ /dev/null @@ -1,420 +0,0 @@ -/* - * (C) Copyright 2000 Texas Instruments - * - * This file os based on the following u-boot file: - * common/cmd_nand.c - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include - -#ifdef CFG_SW_ECC_512 - -/* - * invparity is a 256 byte table that contains the odd parity - * for each byte. So if the number of bits in a byte is even, - * the array element is 1, and when the number of bits is odd - * the array eleemnt is 0. - */ -static const char invparity[256] = { - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1 -}; - -/* - * bitsperbyte contains the number of bits per byte - * this is only used for testing and repairing parity - * (a precalculated value slightly improves performance) - */ -static const char bitsperbyte[256] = { - 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, - 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8, -}; - -/* - * addressbits is a lookup table to filter out the bits from the xor-ed - * ecc data that identify the faulty location. - * this is only used for repairing parity - * see the comments in nand_correct_data for more details - */ -static const char addressbits[256] = { - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05, - 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09, - 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f, - 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d, - 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f -}; - -/* - * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte - * block - * @mtd: MTD block structure - * @buf: input buffer with raw data - * @code: output buffer with ECC - */ -void nand_calculate_ecc(const u_char *buf, u_char *code) -{ - int i; - const uint32_t *bp = (uint32_t *)buf; - /* 256 or 512 bytes/ecc */ - int eccsize = 512; - const uint32_t eccsize_mult = eccsize >> 8; - uint32_t cur; /* current value in buffer */ - /* rp0..rp15..rp17 are the various accumulated parities (per byte) */ - uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7; - uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16; - uint32_t rp17 = 0; - uint32_t par; /* the cumulative parity for all data */ - uint32_t tmppar; /* the cumulative parity for this iteration; - for rp12, rp14 and rp16 at the end of the - loop */ - par = 0; - rp4 = 0; - rp6 = 0; - rp8 = 0; - rp10 = 0; - rp12 = 0; - rp14 = 0; - rp16 = 0; - - /* - * The loop is unrolled a number of times; - * This avoids if statements to decide on which rp value to update - * Also we process the data by longwords. - * Note: passing unaligned data might give a performance penalty. - * It is assumed that the buffers are aligned. - * tmppar is the cumulative sum of this iteration. - * needed for calculating rp12, rp14, rp16 and par - * also used as a performance improvement for rp6, rp8 and rp10 - */ - for (i = 0; i < eccsize_mult << 2; i++) { - cur = *bp++; - tmppar = cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= tmppar; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp8 ^= tmppar; - - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp10 ^= tmppar; - - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp6 ^= cur; - rp8 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= cur; - rp8 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp8 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp8 ^= cur; - - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp6 ^= cur; - cur = *bp++; - tmppar ^= cur; - rp4 ^= cur; - cur = *bp++; - tmppar ^= cur; - - par ^= tmppar; - if ((i & 0x1) == 0) - rp12 ^= tmppar; - if ((i & 0x2) == 0) - rp14 ^= tmppar; - if (eccsize_mult == 2 && (i & 0x4) == 0) - rp16 ^= tmppar; - } - - /* - * handle the fact that we use longword operations - * we'll bring rp4..rp14..rp16 back to single byte entities by - * shifting and xoring first fold the upper and lower 16 bits, - * then the upper and lower 8 bits. - */ - rp4 ^= (rp4 >> 16); - rp4 ^= (rp4 >> 8); - rp4 &= 0xff; - rp6 ^= (rp6 >> 16); - rp6 ^= (rp6 >> 8); - rp6 &= 0xff; - rp8 ^= (rp8 >> 16); - rp8 ^= (rp8 >> 8); - rp8 &= 0xff; - rp10 ^= (rp10 >> 16); - rp10 ^= (rp10 >> 8); - rp10 &= 0xff; - rp12 ^= (rp12 >> 16); - rp12 ^= (rp12 >> 8); - rp12 &= 0xff; - rp14 ^= (rp14 >> 16); - rp14 ^= (rp14 >> 8); - rp14 &= 0xff; - if (eccsize_mult == 2) { - rp16 ^= (rp16 >> 16); - rp16 ^= (rp16 >> 8); - rp16 &= 0xff; - } - - /* - * we also need to calculate the row parity for rp0..rp3 - * This is present in par, because par is now - * rp3 rp3 rp2 rp2 in little endian and - * rp2 rp2 rp3 rp3 in big endian - * as well as - * rp1 rp0 rp1 rp0 in little endian and - * rp0 rp1 rp0 rp1 in big endian - * First calculate rp2 and rp3 - */ - rp3 = (par >> 16); - rp3 ^= (rp3 >> 8); - rp3 &= 0xff; - rp2 = par & 0xffff; - rp2 ^= (rp2 >> 8); - rp2 &= 0xff; - - /* reduce par to 16 bits then calculate rp1 and rp0 */ - par ^= (par >> 16); - rp1 = (par >> 8) & 0xff; - rp0 = (par & 0xff); - - /* finally reduce par to 8 bits */ - par ^= (par >> 8); - par &= 0xff; - - /* - * and calculate rp5..rp15..rp17 - * note that par = rp4 ^ rp5 and due to the commutative property - * of the ^ operator we can say: - * rp5 = (par ^ rp4); - * The & 0xff seems superfluous, but benchmarking learned that - * leaving it out gives slightly worse results. No idea why, probably - * it has to do with the way the pipeline in pentium is organized. - */ - rp5 = (par ^ rp4) & 0xff; - rp7 = (par ^ rp6) & 0xff; - rp9 = (par ^ rp8) & 0xff; - rp11 = (par ^ rp10) & 0xff; - rp13 = (par ^ rp12) & 0xff; - rp15 = (par ^ rp14) & 0xff; - if (eccsize_mult == 2) - rp17 = (par ^ rp16) & 0xff; - - /* - * Finally calculate the ecc bits. - * Again here it might seem that there are performance optimisations - * possible, but benchmarks showed that on the system this is developed - * the code below is the fastest - */ - code[1] = - (invparity[rp7] << 7) | - (invparity[rp6] << 6) | - (invparity[rp5] << 5) | - (invparity[rp4] << 4) | - (invparity[rp3] << 3) | - (invparity[rp2] << 2) | - (invparity[rp1] << 1) | - (invparity[rp0]); - code[0] = - (invparity[rp15] << 7) | - (invparity[rp14] << 6) | - (invparity[rp13] << 5) | - (invparity[rp12] << 4) | - (invparity[rp11] << 3) | - (invparity[rp10] << 2) | - (invparity[rp9] << 1) | - (invparity[rp8]); - if (eccsize_mult == 1) - code[2] = - (invparity[par & 0xf0] << 7) | - (invparity[par & 0x0f] << 6) | - (invparity[par & 0xcc] << 5) | - (invparity[par & 0x33] << 4) | - (invparity[par & 0xaa] << 3) | - (invparity[par & 0x55] << 2) | - 3; - else - code[2] = - (invparity[par & 0xf0] << 7) | - (invparity[par & 0x0f] << 6) | - (invparity[par & 0xcc] << 5) | - (invparity[par & 0x33] << 4) | - (invparity[par & 0xaa] << 3) | - (invparity[par & 0x55] << 2) | - (invparity[rp17] << 1) | - (invparity[rp16] << 0); -} - -/** - * nand_correct_data - [NAND Interface] Detect and correct bit error(s) - * @mtd: MTD block structure - * @buf: raw data read from the chip - * @read_ecc: ECC from the chip - * @calc_ecc: the ECC calculated from raw data - * - * Detect and correct a 1 bit error for 256/512 byte block - */ -int nand_correct_data(unsigned char *buf, - unsigned char *read_ecc, unsigned char *calc_ecc) -{ - unsigned char b0, b1, b2; - uint32_t byte_addr; - unsigned char bit_addr; - /* 256 or 512 bytes/ecc */ - int eccsize = 512; - const uint32_t eccsize_mult = eccsize >> 8; - /* - * b0 to b2 indicate which bit is faulty (if any) - * we might need the xor result more than once, - * so keep them in a local var - */ - b0 = read_ecc[1] ^ calc_ecc[1]; - b1 = read_ecc[0] ^ calc_ecc[0]; - b2 = read_ecc[2] ^ calc_ecc[2]; - - /* check if there are any bitfaults */ - - /* repeated if statements are slightly more efficient than switch ... */ - /* ordered in order of likelihood */ - - if ((b0 | b1 | b2) == 0) - return 0; /* no error */ - - if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) && - (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) && - ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) || - (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) { - /* single bit error */ - /* - * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty - * byte, cp 5/3/1 indicate the faulty bit. - * A lookup table (called addressbits) is used to filter - * the bits from the byte they are in. - * A marginal optimisation is possible by having three - * different lookup tables. - * One as we have now (for b0), one for b2 - * (that would avoid the >> 1), and one for b1 (with all values - * << 4). However it was felt that introducing two more tables - * hardly justify the gain. - * - * The b2 shift is there to get rid of the lowest two bits. - * We could also do addressbits[b2] >> 1 but for the - * performace it does not make any difference - */ - if (eccsize_mult == 1) - byte_addr = (addressbits[b1] << 4) + addressbits[b0]; - else - byte_addr = (addressbits[b2 & 0x3] << 8) + - (addressbits[b1] << 4) + addressbits[b0]; - bit_addr = addressbits[b2 >> 2]; - /* flip the bit */ - buf[byte_addr] ^= (1 << bit_addr); - return 1; - - } - /* count nr of bits; use table lookup, faster than calculating it */ - if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1) - return 1; /* error in ecc data; no action needed */ - - return -1; -} -#endif /* CFG_SW_ECC_512 */ diff --git a/uart-monitor/lib/printf.c b/uart-monitor/lib/printf.c deleted file mode 100644 index 91d22fc..0000000 --- a/uart-monitor/lib/printf.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * (C) Copyright 2004 Texas Instruments - * - * Based on the following file: - * linux/lib/vsprintf.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* vsprintf.c -- Lars Wirzenius & Linus Torvalds. */ -/* - * Wirzenius wrote this portably, Torvalds fucked it up :-) - */ - -#include -#include - -#ifdef CFG_PRINTF - -/* we use this so that we can do without the ctype library */ -#define is_digit(c) ((c) >= '0' && (c) <= '9') - -size_t strnlen(const char * s, size_t count) -{ - const char *sc; - - for (sc = s; count-- && *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} - -static int skip_atoi(const char **s) -{ - int i=0; - - while (is_digit(**s)) - i = i*10 + *((*s)++) - '0'; - return i; -} - -#define ZEROPAD 1 /* pad with zero */ -#define SIGN 2 /* unsigned/signed long */ -#define PLUS 4 /* show plus */ -#define SPACE 8 /* space if plus */ -#define LEFT 16 /* left justified */ -#define SPECIAL 32 /* 0x */ -#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ - -#define do_div(n,base) ({ \ -int __res; \ -__res = ((unsigned long) n) % (unsigned) base; \ -n = ((unsigned long) n) / (unsigned) base; \ -__res; }) - -static char * number(char * str, long num, int base, int size, int precision - ,int type) -{ - char c,sign,tmp[66]; - const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; - int i; - - if (type & LARGE) - digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; - if (type & LEFT) - type &= ~ZEROPAD; - if (base < 2 || base > 36) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - if (type & SIGN) { - if (num < 0) { - sign = '-'; - num = -num; - size--; - } else if (type & PLUS) { - sign = '+'; - size--; - } else if (type & SPACE) { - sign = ' '; - size--; - } - } - if (type & SPECIAL) { - if (base == 16) - size -= 2; - else if (base == 8) - size--; - } - i = 0; - if (num == 0) - tmp[i++]='0'; - else while (num != 0) - tmp[i++] = digits[do_div(num,base)]; - if (i > precision) - precision = i; - size -= precision; - if (!(type&(ZEROPAD+LEFT))) - while(size-->0) - *str++ = ' '; - if (sign) - *str++ = sign; - if (type & SPECIAL) { - if (base==8) - *str++ = '0'; - else if (base==16) { - *str++ = '0'; - *str++ = digits[33]; - } - } - if (!(type & LEFT)) - while (size-- > 0) - *str++ = c; - while (i < precision--) - *str++ = '0'; - while (i-- > 0) - *str++ = tmp[i]; - while (size-- > 0) - *str++ = ' '; - return str; -} - - -static int vsprintf(char *buf, const char *fmt, va_list args) -{ - int len; - unsigned long num; - int i, base; - char * str; - const char *s; - - int flags; /* flags to number() */ - - int field_width; /* width of output field */ - int precision; /* min. # of digits for integers; max - number of chars for from string */ - int qualifier; /* 'h', 'l', or 'L' for integer fields */ - - for (str=buf ; *fmt ; ++fmt) { - if (*fmt != '%') { - *str++ = *fmt; - continue; - } - - /* process flags */ - flags = 0; - repeat: - ++fmt; /* this also skips first '%' */ - switch (*fmt) { - case '-': flags |= LEFT; goto repeat; - case '+': flags |= PLUS; goto repeat; - case ' ': flags |= SPACE; goto repeat; - case '#': flags |= SPECIAL; goto repeat; - case '0': flags |= ZEROPAD; goto repeat; - } - - /* get field width */ - field_width = -1; - if (is_digit(*fmt)) - field_width = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - field_width = va_arg(args, int); - if (field_width < 0) { - field_width = -field_width; - flags |= LEFT; - } - } - - /* get the precision */ - precision = -1; - if (*fmt == '.') { - ++fmt; - if (is_digit(*fmt)) - precision = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - precision = va_arg(args, int); - } - if (precision < 0) - precision = 0; - } - - /* get the conversion qualifier */ - qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') { - qualifier = *fmt; - ++fmt; - } - - /* default base */ - base = 10; - - switch (*fmt) { - case 'c': - if (!(flags & LEFT)) - while (--field_width > 0) - *str++ = ' '; - *str++ = (unsigned char) va_arg(args, int); - while (--field_width > 0) - *str++ = ' '; - continue; - - case 's': - s = va_arg(args, char *); - if (!s) - s = ""; - - len = strnlen(s, precision); - - if (!(flags & LEFT)) - while (len < field_width--) - *str++ = ' '; - for (i = 0; i < len; ++i) - *str++ = *s++; - while (len < field_width--) - *str++ = ' '; - continue; - - case 'p': - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= ZEROPAD; - } - str = number(str, - (unsigned long) va_arg(args, void *), 16, - field_width, precision, flags); - continue; - - - case 'n': - if (qualifier == 'l') { - long * ip = va_arg(args, long *); - *ip = (str - buf); - } else { - int * ip = va_arg(args, int *); - *ip = (str - buf); - } - continue; - - case '%': - *str++ = '%'; - continue; - - /* integer number formats - set up the flags and "break" */ - case 'o': - base = 8; - break; - - case 'X': - flags |= LARGE; - case 'x': - base = 16; - break; - - case 'd': - case 'i': - flags |= SIGN; - case 'u': - break; - - default: - *str++ = '%'; - if (*fmt) - *str++ = *fmt; - else - --fmt; - continue; - } - if (qualifier == 'l') - num = va_arg(args, unsigned long); - else if (qualifier == 'h') { - num = (unsigned short) va_arg(args, int); - if (flags & SIGN) - num = (short) num; - } else if (flags & SIGN) - num = va_arg(args, int); - else - num = va_arg(args, unsigned int); - str = number(str, num, base, field_width, precision, flags); - } - *str = '\0'; - return str-buf; -} - -void serial_printf (const char *fmt, ...) -{ - va_list args; - uint i; - char printbuffer[CFG_PBSIZE]; - - va_start (args, fmt); - - /* For this to work, printbuffer must be larger than - * anything we ever want to print. - */ - i = vsprintf (printbuffer, fmt, args); - va_end (args); - - /* Print the string */ - serial_puts (printbuffer); -} -#endif diff --git a/uart-monitor/mkconfig b/uart-monitor/mkconfig deleted file mode 100755 index 43b6f09..0000000 --- a/uart-monitor/mkconfig +++ /dev/null @@ -1,61 +0,0 @@ -#!/bin/sh -e - -# Script to create header files and links to configure -# X-Loader for a specific board. -# -# Parameters: Target Architecture CPU Board -# -# (C) 2004 Texas Instruments -# (C) 2002 DENX Software Engineering, Wolfgang Denk -# - -APPEND=no # Default: Create new config file - -while [ $# -gt 0 ] ; do - case "$1" in - --) shift ; break ;; - -a) shift ; APPEND=yes ;; - *) break ;; - esac -done - -[ $# -lt 4 ] && exit 1 -[ $# -gt 5 ] && exit 1 - -echo "Configuring for $1 board..." - -cd ./include - -# -# Create link to architecture specific headers -# -rm -f asm/arch -ln -s arch-$3 asm/arch - -if [ "$2" = "arm" ] ; then - rm -f asm/proc - ln -s proc-armv asm/proc -fi - -# -# Create include file for Make -# -echo "ARCH = $2" > config.mk -echo "CPU = $3" >> config.mk -echo "BOARD = $4" >> config.mk - -[ "$5" ] && echo "VENDOR = $5" >> config.mk - -# -# Create board specific header file -# -if [ "$APPEND" = "yes" ] # Append to existing config file -then - echo >> config.h -else - > config.h # Create new config file -fi -echo "/* Automatically generated - do not edit */" >>config.h -echo "#include " >>config.h - -exit 0 diff --git a/uart-monitor/scripts/mkoneboot.sh b/uart-monitor/scripts/mkoneboot.sh deleted file mode 100644 index f0862a5..0000000 --- a/uart-monitor/scripts/mkoneboot.sh +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -IMAGE1=x-load.bin.ift -IMAGE2=x-load-signed.ift -TMP=oneloader -PAGESIZE=2048 - -size=`ls -la $IMAGE1 | awk -F' ' '{ printf $5}'` -let remain=$PAGESIZE-$size -dd if=/dev/zero of=$IMAGE2 bs=1 count=512 -#dd if=/dev/zero of=zerofile bs=$remain count=1 > /dev/null 2> /dev/null -cat $IMAGE1>>$IMAGE2 - -rm -f $IMAGE1 - -echo "Create $IMAGE2 completed..." diff --git a/uart-monitor/scripts/signGP.c b/uart-monitor/scripts/signGP.c deleted file mode 100644 index 0e8ed07..0000000 --- a/uart-monitor/scripts/signGP.c +++ /dev/null @@ -1,73 +0,0 @@ -// -// signGP.c -// Read the x-load.bin file and write out the x-load.bin.ift file. -// The signed image is the original pre-pended with the size of the image -// and the load address. If not entered on command line, file name is -// assumed to be x-load.bin in current directory and load address is -// 0x40200800. - -#include -#include -#include -#include -#include -#include - - -main(int argc, char *argv[]) -{ - int i; - char ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch; - FILE *ifile, *ofile; - unsigned long loadaddr, len; - struct stat sinfo; - - - // Default to x-load.bin and 0x40200800. - strcpy(ifname, "x-load.bin"); - loadaddr = 0x40200800; - - if ((argc == 2) || (argc == 3)) - strcpy(ifname, argv[1]); - - if (argc == 3) - loadaddr = strtol(argv[2], NULL, 16); - - // Form the output file name. - strcpy(ofname, ifname); - strcat(ofname, ".ift"); - - // Open the input file. - ifile = fopen(ifname, "rb"); - if (ifile == NULL) { - printf("Cannot open %s\n", ifname); - exit(0); - } - - // Get file length. - stat(ifname, &sinfo); - len = sinfo.st_size; - - // Open the output file and write it. - ofile = fopen(ofname, "wb"); - if (ofile == NULL) { - printf("Cannot open %s\n", ofname); - fclose(ifile); - exit(0); - } - - // Pad 1 sector of zeroes. - //ch = 0x00; - //for (i=0; i<0x200; i++) - // fwrite(&ch, 1, 1, ofile); - - fwrite(&len, 1, 4, ofile); - fwrite(&loadaddr, 1, 4, ofile); - for (i=0; i