From 819e36b8ceadb1d67db1ffe91b99c5282bfc6159 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Fri, 20 Apr 2012 14:10:36 +0200 Subject: tree moved to a better location --- board/omap2420h4/omap2420h4.c | 598 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 598 insertions(+) create mode 100644 board/omap2420h4/omap2420h4.c (limited to 'board/omap2420h4/omap2420h4.c') diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c new file mode 100644 index 0000000..ef81b49 --- /dev/null +++ b/board/omap2420h4/omap2420h4.c @@ -0,0 +1,598 @@ +/* + * Copyright (C) 2005 Texas Instruments. + * Jian Zhang + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include + +#include +#include +#include + +static void wait_for_command_complete(unsigned int wd_base); +static void watchdog_init(void); +static void peripheral_enable(void); +static void muxSetupUART1(void); +static u32 get_cpu_rev(void); + + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +#ifdef CFG_SDRAM_DDR +void +config_sdram_ddr(u32 rev) +{ + /* ball D11, mode 0 */ + __raw_writeb(0x08, 0x48000032); + + /* SDRC_CS0 Configuration */ + if (rev == CPU_2420_2422_ES1) { + __raw_writel(H4_2422_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + } else { + __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + } + + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + + /* + * CS0 SDRC Mode Register + * Burst length = 4 - DDR memory + * Serial mode + * CAS latency = 3 + */ + __raw_writel(0x00000032, SDRC_MR_0); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000002, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000002, SDRC_DLLB_CTRL); + } else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x + } + +} +#endif // CFG_SDRAM_DDR + + +#ifdef CFG_SDRAM_COMBO +void +config_sdram_combo(u32 rev) +{ + + u32 dllctrl=0; + + /* ball C12, mode 0 */ + __raw_writeb(0x00, 0x480000a1); + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */ + __raw_writeb(0x00, 0x480000a3); + + /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */ + __raw_writel(0x00000012, SDRC_SYSCONFIG); + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); + + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0); + + /* CS1 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* CS1 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_1); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ? + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + } +} + +#endif // CFG_SDRAM_COMBO + +#ifdef CFG_SDRAM_SDR +void +config_sdram_sdr(u32 rev) +{ + u32 dllctrl=0; + + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + + __raw_writel(0x00000012, SDRC_SYSCONFIG); + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); + + /* Chip-level shared interface management */ + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */ + if (rev == CPU_2420_2422_ES1) + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + else + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX14: 32Mbx32 */ + __raw_writel(H4_2420_SDRC_MDCFG_0_SDR, SDRC_MCFG_0); /* diff from combo case */ + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 2 - SDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2420_SDRC_MR_0_SDR, SDRC_MR_0); /* diff from combo case */ + + /* SDRC DLLA control register */ + /* Enable DLL, Load counter with 115 (middle of range) */ + /* Delay is 90 degrees */ + + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + } + +} +#endif // CFG_SDRAM_SDR + +#ifdef CFG_SDRAM_STACKED +void +config_sdram_stacked(u32 rev) +{ + + /* Pin Muxing for SDRC */ + __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */ + __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */ + __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */ + __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */ + + /* configure sdrc 32 bit for COMBO ddr sdram */ + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */ + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */ + + /* SDRC_SHARING */ + /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */ + //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(0x00004900, SDRC_SHARING); + + /* SDRC_CS0 Configuration */ + /* None for ES2.1 */ + + /* SDRC_CS1 Configuration */ + __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */ + + /* Disable power down of CKE */ + __raw_writel(0x00000085, SDRC_POWER); + + __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */ + __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */ + __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */ + __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */ + + /*Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(0x00000032, SDRC_MR_1); + __raw_writel(0x00000020, SDRC_EMR2_1); /* weak-strength driver */ + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x + } +} +#endif // CFG_SDRAM_STACKED + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ +int s_init(int skip) +{ + u32 rev; + + rev = get_cpu_rev(); + + watchdog_init(); + muxSetupUART1(); + delay(100); + + /*DPLL out = 2x DPLL --> core clock */ + __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); + + /*DPLL into low power bypass (others off) */ + __raw_writel(0x00000001, CM_CLKEN_PLL); + + /*MPU core clock = Core /2 = 300 */ + __raw_writel(MPU_DIV, CM_CLKSEL_MPU); + + /*DSPif=200, DSPif=100, IVA=200 */ + __raw_writel(DSP_DIV, CM_CLKSEL_DSP); + + /*GFX clock (L3/2) 50MHz */ + __raw_writel(GFX_DIV, CM_CLKSEL_GFX); + + /*L3=100, L4=100, DisplaySS=50 Vlync=96Mhz,ssi=100, usb=50 */ + __raw_writel(BUS_DIV, CM_CLKSEL1_CORE); + + /*12MHz apll src, 12/(1+1)*50=300 */ + __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); + + /*Valid the configuration */ + __raw_writel(0x00000001, PRCM_CLKCFG_CTRL); + delay(1000); + + /*Enable DPLL=300, 96MHz APLL locked. */ + __raw_writel(0x0000000F, CM_CLKEN_PLL); + delay(200000); + +#ifdef CFG_SDRAM_DDR + config_sdram_ddr(rev); +#elif defined(CFG_SDRAM_COMBO) + config_sdram_combo(rev); +#elif defined(CFG_SDRAM_SDR) + config_sdram_sdr(rev); +#elif defined(CFG_SDRAM_STACKED) + config_sdram_stacked(rev); +#else +#error SDRAM type not supported +#endif + + delay(20000); + peripheral_enable(); + return(0); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +static void watchdog_init(void) +{ +#define GP (BIT8|BIT9) + + /* There are 4 watch dogs. 1 secure, and 3 general purpose. + * I would expect that the ROM takes care of the secure one, + * but we will try also. Of the 3 GP ones, 1 can reset us + * directly, the other 2 only generate MPU interrupts. + */ + __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR); + +#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/ + __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR); + wait_for_command_complete(WD3_BASE); + __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR); + + __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR); + wait_for_command_complete(WD4_BASE); + __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR); +#endif + +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +static void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base+WWPS); + } while (pending); +} + + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +static void peripheral_enable(void) +{ + unsigned int v, if_clks=0, func_clks=0; + + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */ + __raw_writel(v, CM_CLKSEL2_CORE); + __raw_writel(0x1, CM_CLKSEL_WKUP); + +#ifdef CFG_NS16550 + /* Enable UART1 clock */ + func_clks |= BIT21; + if_clks |= BIT21; +#endif + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + delay(1000); + +#ifndef KERNEL_UPDATED + { +#define V1 0xffffffff +#define V2 0x00000007 + + __raw_writel(V1, CM_FCLKEN1_CORE); + __raw_writel(V2, CM_FCLKEN2_CORE); + __raw_writel(V1, CM_ICLKEN1_CORE); + __raw_writel(V1, CM_ICLKEN2_CORE); + } +#endif + +} + +/* Pin Muxing registers used for UART1 */ +#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) +#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) +#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) +#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) +/**************************************** + * Routine: muxSetupUART1 (ostboot) + * Description: Set up uart1 muxing + *****************************************/ +static void muxSetupUART1(void) +{ + volatile unsigned char *MuxConfigReg; + + /* UART1_CTS pin configuration, PIN = D21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RTS pin configuration, PIN = H21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_TX pin configuration, PIN = L20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RX pin configuration, PIN = T21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ +} + +int nand_init(void) +{ + u32 rev; + + rev = get_cpu_rev(); + + + /* GPMC pin muxing */ + (*(volatile int*)0x48000070) &= 0x000000FF; + (*(volatile int*)0x48000074) &= 0x00000000; + (*(volatile int*)0x48000078) &= 0x00000000; + (*(volatile int*)0x4800007C) &= 0x00000000; + (*(volatile int*)0x48000080) &= 0xFF000000; + + /* GPMC_IO_DIR */ + (*(volatile int*)0x4800008C) = 0x19000000; + + /* GPMC Configuration */ + (*(volatile int*)0x6800A010) = 0x0000000A; + while (((*(volatile int *)0x6800A014) & 0x00000001) == 0); + + (*(volatile int*)0x6800A050) = 0x00000001; + (*(volatile int*)0x6800A060) = 0x00001800; + (*(volatile int*)0x6800A064) = 0x00141400; + (*(volatile int*)0x6800A068) = 0x00141400; + (*(volatile int*)0x6800A06C) = 0x0F010F01; + (*(volatile int*)0x6800A070) = 0x010C1414; + (*(volatile int*)0x6800A074) = 0x00000A80; + (*(volatile int*)0x6800A078) = 0x00000C44; //base 0x04000000 + + (*(volatile int*)0x6800A0A8) = 0x00000000; + delay(1000); +#ifdef CFG_SDRAM_STACKED + (*(volatile int*)0x6800A090) = 0x00011000; +#else + (*(volatile int*)0x6800A090) = 0x00011200; +#endif + (*(volatile int*)0x6800A094) = 0x001f1f00; + (*(volatile int*)0x6800A098) = 0x00080802; + (*(volatile int*)0x6800A09C) = 0x1C091C09; + (*(volatile int*)0x6800A0A0) = 0x031A1F1F; + (*(volatile int*)0x6800A0A4) = 0x000003C2; + (*(volatile int*)0x6800A0A8) = 0x00000F48; + + if (rev != CPU_2420_2422_ES1) + (*(volatile int*)0x6800A040) = 0x1FF0; // es2.x + + if (nand_chip()){ + printf("Unsupported Chip!\n"); + return 1; + } + return 0; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 v; + v = __raw_readl(TAP_IDCODE_REG); + v = v >> 28; + return(v+1); /* currently 2422 and 2420 match up */ +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{} + + + -- cgit v1.1