From 819e36b8ceadb1d67db1ffe91b99c5282bfc6159 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Fri, 20 Apr 2012 14:10:36 +0200 Subject: tree moved to a better location --- include/configs/omap4430panda.h | 106 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 include/configs/omap4430panda.h (limited to 'include/configs/omap4430panda.h') diff --git a/include/configs/omap4430panda.h b/include/configs/omap4430panda.h new file mode 100644 index 0000000..74e2f42 --- /dev/null +++ b/include/configs/omap4430panda.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2006 + * Texas Instruments + * Richard Woodruff + * + * X-Loader Configuation settings for the TI OMAP SDP3430 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* serial printf facility takes about 3.5K */ +#define CFG_PRINTF +//#undef CFG_PRINTF + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA9 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP44XX 1 /* which is a 34XX */ +#define CONFIG_OMAP4430 1 /* which is in a 3430 */ +#define CONFIG_4430PANDA 1 /* working with SDP */ + +/* Keep Default @ 33MHz at boot loader level + * On Phoenix board vlotage needs to be bumped up + * before scaling the MPU up + */ +#define CONFIG_MPU_600 1 +#define CORE_190MHZ 1 +/* Enable the below macro if MMC boot support is required */ +#define CONFIG_MMC 1 +#if defined(CONFIG_MMC) + /* To Enable MMC boot for OMAP4430 Panda */ + //#define CONFIG_MMC1 1 + /* To Enable EMMC boot for OMAP4430 Panda */ + #define CONFIG_MMC2 1 + #define CFG_CMD_MMC 1 + #define CFG_CMD_FAT 1 +#endif + +#include /* get chip and board defs */ + +/* uncomment it if you need timer based udelay(). it takes about 250 bytes */ +//#define CFG_UDELAY + +/* Clock Defines */ +#define V_OSCK 19200000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +/* Memory type */ +#define CFG_4430SDRAM_DDR 1 + +#ifdef CFG_PRINTF + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (48000000) +#define CFG_NS16550_COM3 OMAP44XX_UART3 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on 3430SDP */ +#define CONFIG_CONS_INDEX 3 + +#define CONFIG_BAUDRATE 115200 +#define CFG_PBSIZE 256 + +#endif /* CFG_PRINTF */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LOADADDR 0x80e80000 + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CFG_ENV_SIZE 0x100 +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#endif /* __CONFIG_H */ + -- cgit v1.1