nearly working nandroid, built against libc

1 files changed, 0 insertions, 293 deletions

diff --git a/res/nandroid-mobile.sh b/res/nandroid-mobile.sh
deleted file mode 100755
index 9a9a824..0000000
--- a/res/nandroid-mobile.sh
+++ /dev/null
@@ -1,293 +0,0 @@
-#!/sbin/sh
-
-# nandroid v2.1 - an Android backup tool for the G1 by infernix and brainaid
-
-# Requirements:
-
-# - a modded android in recovery mode (JF 1.3 will work by default)
-# - adb shell as root in recovery mode if not using a pre-made recovery image
-# - busybox in recovery mode
-# - dump_image-arm-uclibc compiled and in path on phone
-# - mkyaffs2image-arm-uclibc compiled and installed in path on phone
-
-# Reference data:
-
-# dev:    size   erasesize  name
-#mtd0: 00040000 00020000 "misc"
-#mtd1: 00500000 00020000 "recovery"
-#mtd2: 00280000 00020000 "boot"
-#mtd3: 04380000 00020000 "system"
-#mtd4: 04380000 00020000 "cache"
-#mtd5: 04ac0000 00020000 "userdata"
-#mtd6 is everything, dump splash1 with: dd if=/dev/mtd/mtd6ro of=/sdcard/splash1.img skip=19072 bs=2048 count=150
-
-# We don't dump misc or cache because they do not contain any useful data that we are aware of at this time.
-
-# Logical steps (v2.1):
-#
-# 0.  test for a target dir and the various tools needed, if not found then exit with error.
-# 1.  check "adb devices" for a device in recovery mode. set DEVICEID variable to the device ID. abort when not found.
-# 2.  mount system and data partitions read-only, set up adb portforward and create destdir
-# 3.  check free space on /cache, exit if less blocks than 20MB free
-# 4.  push required tools to device in /cache
-# 5   for partitions boot recovery misc:
-# 5a  get md5sum for content of current partition *on the device* (no data transfered)
-# 5b  while MD5sum comparison is incorrect (always is the first time):
-# 5b1 dump current partition to a netcat session
-# 5b2 start local netcat to dump image to current dir
-# 5b3 compare md5sums of dumped data with dump in current dir. if correct, contine, else restart the loop (6b1)
-# 6   for partitions system data:
-# 6a  get md5sum for tar of content of current partition *on the device* (no data transfered)
-# 6b  while MD5sum comparison is incorrect (always is the first time):
-# 6b1 tar current partition to a netcat session
-# 6b2 start local netcat to dump tar to current dir
-# 6b3 compare md5sums of dumped data with dump in current dir. if correct, contine, else restart the loop (6b1)
-# 6c  if i'm running as root:
-# 6c1 create a temp dir using either tempdir command or the deviceid in /tmp
-# 6c2 extract tar to tempdir
-# 6c3 invoke mkyaffs2image to create the img
-# 6c4 clean up
-# 7.  remove tools from device /cache
-# 8.  umount system and data on device
-# 9.  print success.
-
-
-DEVICEID=foo
-RECOVERY=foo
-
-echo "nandroid-mobile v2.1"
-
-
-if [ "$1" == "" ]; then
-	echo "Usage: $0 {backup|restore} [/path/to/nandroid/backup/]"
-	echo "- backup will store a full system backup on /sdcard/nandroid/$DEVICEID"
-	echo "- restore path will restore the last made backup for boot, system, recovery and data"
-	exit 0
-fi
-
-case $1 in
-	backup)
-		mkyaffs2image=`which mkyaffs2image`
-		if [ "$mkyaffs2image" == "" ]; then
-			mkyaffs2image=`which mkyaffs2image-arm-uclibc`
-			if [ "$mkyaffs2image" == "" ]; then
-				echo "error: mkyaffs2image or mkyaffs2image-arm-uclibc not found in path"
-				exit 1
-			fi
-		fi
-		dump_image=`which dump_image`
-		if [ "$dump_image" == "" ]; then
-			dump_image=`which dump_image-arm-uclibc`
-			if [ "$dump_image" == "" ]; then
-				echo "error: dump_image or dump_image-arm-uclibc not found in path"
-				exit 1
-			fi
-		fi
-		break
-		;;
-	restore)
-		flash_image=`which flash_image`
-		if [ "$flash_image" == "" ]; then
-			flash_image=`which flash_image-arm-uclibc`
-			if [ "$flash_image" == "" ]; then
-				echo "error: flash_image or flash_image-arm-uclibc not found in path"
-				exit 1
-			fi
-		fi
-		break
-		;;
-esac
-
-# 1
-DEVICEID=`cat /proc/cmdline | sed "s/.*serialno=//" | cut -d" " -f1`
-RECOVERY=`cat /proc/cmdline | grep "androidboot.mode=recovery"`
-if [ "$RECOVERY" == "foo" ]; then
-	echo "error: not running in recovery mode, aborting"
-	exit 1
-fi
-if [ "$DEVICEID" == "foo" ]; then
-	echo "error: device id not found in /proc/cmdline, aborting"
-	exit 1
-fi
-if [ ! "`id -u 2>/dev/null`" == "0" ]; then
-	if [ "`whoami 2>&1 | grep 'uid 0'`" == "" ]; then
-		echo "error: must run as root, aborting"
-		exit 1
-	fi
-fi
-
-
-case $1 in
-	restore)
-		ENERGY=`cat /sys/class/power_supply/battery/capacity`
-		if [ "`cat /sys/class/power_supply/battery/status`" == "Charging" ]; then
-			ENERGY=100
-		fi
-		if [ ! $ENERGY -ge 30 ]; then
-			echo "Error: not enough battery power"
-			echo "Connect charger or USB power and try again"
-			exit 1
-		fi
-		RESTOREPATH=$2
-		if [ ! -f $RESTOREPATH/nandroid.md5 ]; then
-			echo "error: $RESTOREPATH/nandroid.md5 not found, cannot verify backup data"
-			exit 1
-		fi
-		umount /system 2>/dev/null
-		umount /data 2>/dev/null
-		if [ ! "`mount | grep data`" == "" ]; then
-			echo "error: unable to umount /data, aborting"	
-			exit 1
-		fi
-		if [ ! "`mount | grep system`" == "" ]; then
-			echo "error: unable to umount /system, aborting"	
-			exit 1
-		fi
-		
-		echo "Verifying backup images..."
-		CWD=$PWD
-		cd $RESTOREPATH
-		md5sum -c nandroid.md5
-		if [ $? -eq 1 ]; then
-			echo "error: md5sum mismatch, aborting"
-			exit 1
-		fi
-		for image in boot recovery; do
-			echo "Flashing $image..."
-			$flash_image $image $image.img
-		done
-		echo "Flashing system and data not currently supported"
-		echo "Restore done"
-		exit 0
-		;;
-	backup)
-		break
-		;;
-	*)
-		echo "Usage: $0 {backup|restore} [/path/to/nandroid/backup/]"
-		echo "- backup will store a full system backup on /sdcard/nandroid/$DEVICEID"
-		echo "- restore path will restore the last made backup for boot, system, recovery and data"
-		exit 1
-		;;
-esac
-
-# 2.
-echo "mounting system and data read-only, sdcard read-write"
-umount /system 2>/dev/null
-umount /data 2>/dev/null
-umount /sdcard 2>/dev/null
-mount -o ro /system || FAIL=1
-mount -o ro /data || FAIL=2
-mount /sdcard || mount /dev/block/mmcblk0 /sdcard || FAIL=3
-case $FAIL in
-	1) echo "Error mounting system read-only"; umount /system /data /sdcard; exit 1;;
-	2) echo "Error mounting data read-only"; umount /system /data /sdcard; exit 1;;
-	3) echo "Error mounting sdcard read-write"; umount /system /data /sdcard; exit 1;;
-esac
-
-TIMESTAMP="`date +%Y%m%d-%H%M`"
-DESTDIR="/sdcard/nandroid/$DEVICEID/$TIMESTAMP"
-if [ ! -d $DESTDIR ]; then 
-	mkdir -p $DESTDIR
-	if [ ! -d $DESTDIR ]; then 
-		echo "error: cannot create $DESTDIR"
-		umount /system 2>/dev/null
-		umount /data 2>/dev/null
-		umount /sdcard 2>/dev/null
-		exit 1
-	fi
-else
-	touch $DESTDIR/.nandroidwritable
-	if [ ! -e $DESTDIR/.nandroidwritable ]; then
-		echo "error: cannot write to $DESTDIR"
-		umount /system 2>/dev/null
-		umount /data 2>/dev/null
-		umount /sdcard 2>/dev/null
-		exit 1
-	fi
-	rm $DESTDIR/.nandroidwritable
-fi
-
-# 3.
-echo "checking free space on sdcard"
-FREEBLOCKS="`df -k /sdcard| grep sdcard | awk '{ print $4 }'`"
-# we need about 130MB for the dump
-if [ $FREEBLOCKS -le 130000 ]; then
-	echo "error: not enough free space available on sdcard (need 130mb), aborting."
-	umount /system 2>/dev/null
-	umount /data 2>/dev/null
-	umount /sdcard 2>/dev/null
-	exit 1
-fi
-
-
-
-if [ -e /dev/mtd/mtd6ro ]; then
-	echo -n "Dumping splash1 from device over tcp to $DESTDIR/splash1.img..."
-	dd if=/dev/mtd/mtd6ro of=$DESTDIR/splash1.img skip=19072 bs=2048 count=150 2>/dev/null
-	echo "done"
-	sleep 1s
-	echo -n "Dumping splash2 from device over tcp to $DESTDIR/splash2.img..."
-	dd if=/dev/mtd/mtd6ro of=$DESTDIR/splash2.img skip=19456 bs=2048 count=150 2>/dev/null
-	echo "done"
-fi
-
-
-# 5.
-for image in boot recovery misc; do
-	# 5a
-	DEVICEMD5=`$dump_image $image - | md5sum | awk '{ print $1 }'`
-	sleep 1s
-	MD5RESULT=1
-	# 5b
-	echo -n "Dumping $image to $DESTDIR/$image.img..."
-	ATTEMPT=0
-	while [ $MD5RESULT -eq 1 ]; do
-		let ATTEMPT=$ATTEMPT+1
-		# 5b1
-		$dump_image $image $DESTDIR/$image.img 
-		sync
-		# 5b3
-		echo "${DEVICEMD5}  $DESTDIR/$image.img" | md5sum -c -s -
-		if [ $? -eq 1 ]; then
-			true
-		else
-			MD5RESULT=0
-		fi
-		if [ "$ATTEMPT" == "5" ]; then
-			echo "fatal error while trying to dump $image, aborting"
-			umount /system
-			umount /data
-			umount /sdcard
-			exit 1
-		fi
-	done
-	echo "done"
-done
-
-# 6
-for image in system data cache; do
-	# 6a
-	echo -n "Dumping $image to $DESTDIR/$image.img..."
-	$mkyaffs2image /$image $DESTDIR/$image.img
-	sync
-	echo "done"
-done
-
-
-# 7.
-echo -n "generating md5sum file..."
-CWD=$PWD
-cd $DESTDIR
-md5sum *img > nandroid.md5
-cd $CWD
-echo "done"
-
-# 8.
-echo "unmounting system, data and sdcard"
-umount /system
-umount /data
-umount /sdcard
-
-# 9.
-echo "Backup successful."