diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/Android.mk | 1 | ||||
| -rw-r--r-- | tools/ota/Android.mk | 42 | ||||
| -rwxr-xr-x | tools/ota/add-data-wipe | 118 | ||||
| -rw-r--r-- | tools/ota/add-property-tag.c | 141 | ||||
| -rw-r--r-- | tools/ota/check-lost+found.c | 144 | ||||
| -rw-r--r-- | tools/ota/convert-to-bmp.py | 79 | ||||
| -rw-r--r-- | tools/ota/make-update-script.c | 228 | ||||
| -rwxr-xr-x | tools/ota/otatool | 225 |
8 files changed, 0 insertions, 978 deletions
diff --git a/tools/Android.mk b/tools/Android.mk deleted file mode 100644 index 6571161..0000000 --- a/tools/Android.mk +++ /dev/null @@ -1 +0,0 @@ -include $(all-subdir-makefiles) diff --git a/tools/ota/Android.mk b/tools/ota/Android.mk deleted file mode 100644 index b7a57d6..0000000 --- a/tools/ota/Android.mk +++ /dev/null @@ -1,42 +0,0 @@ -# Copyright (C) 2008 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -LOCAL_PATH := $(call my-dir) - -include $(CLEAR_VARS) -LOCAL_MODULE := make-update-script -LOCAL_SRC_FILES := make-update-script.c -include $(BUILD_HOST_EXECUTABLE) - -ifneq ($(TARGET_SIMULATOR),true) - -include $(CLEAR_VARS) -LOCAL_FORCE_STATIC_EXECUTABLE := true -LOCAL_MODULE := add-property-tag -LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES) -LOCAL_MODULE_TAGS := debug -LOCAL_SRC_FILES := add-property-tag.c -LOCAL_STATIC_LIBRARIES := libc -include $(BUILD_EXECUTABLE) - -include $(CLEAR_VARS) -LOCAL_FORCE_STATIC_EXECUTABLE := true -LOCAL_MODULE := check-lost+found -LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES) -LOCAL_MODULE_TAGS := debug -LOCAL_SRC_FILES := check-lost+found.c -LOCAL_STATIC_LIBRARIES := libcutils libc -include $(BUILD_EXECUTABLE) - -endif # !TARGET_SIMULATOR diff --git a/tools/ota/add-data-wipe b/tools/ota/add-data-wipe deleted file mode 100755 index 8d2626f..0000000 --- a/tools/ota/add-data-wipe +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# Copyright (C) 2007 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -PROGNAME=`basename $0` - -function cleantmp -{ - if [ ! -z "$TMPDIR" ] - then - rm -rf "$TMPDIR" - TMPDIR= - fi -} - -function println -{ - if [ $# -gt 0 ] - then - echo "$PROGNAME: $@" - fi -} - -function fail -{ - println "$@" - cleantmp - exit 1 -} - -function usage -{ - println "$@" - echo "Usage: $PROGNAME <input file> <output file>" - fail -} - -OTATOOL=`which otatool` -if [ -z "$OTATOOL" ] -then - OTATOOL="`dirname $0`/otatool" - if [ ! -x "$OTATOOL" ] - then - fail "Can't find otatool" - fi -fi - - -if [ $# -ne 2 ] -then - usage -fi - -INFILE="$1" -OUTFILE="$2" - -if [ ! -f "$INFILE" ] -then - fail "$INFILE doesn't exist or isn't a file" -fi - -if [ -z "$OUTFILE" ] -then - usage "Output file not specified" -fi - -if [ -d "$OUTFILE" ] -then - usage "Output file may not be a directory" -fi - -if [ "$INFILE" -ef "$OUTFILE" ] -then - fail "Refusing to use the input file as the output file" -fi - -TMPDIR=`mktemp -d "/tmp/$PROGNAME.XXXXXX"` -if [ $? -ne 0 ] -then - TMPDIR= - fail "Can't create temporary directory" -fi - -ORIGSCRIPT="$TMPDIR/orig" -NEWSCRIPT="$TMPDIR/new" - -"$OTATOOL" --dump-script "$INFILE" | -awk ' - { print } - /^format SYSTEM:$/ { - print "delete_recursive DATA:" - } -' > "$NEWSCRIPT" -if [ $? -ne 0 ] -then - fail "Couldn't modify script" -fi - -"$OTATOOL" --replace-script "$NEWSCRIPT" -o "$OUTFILE" "$INFILE" -if [ $? -ne 0 ] -then - fail "Couldn't replace script" -fi - -cleantmp diff --git a/tools/ota/add-property-tag.c b/tools/ota/add-property-tag.c deleted file mode 100644 index 5277edd..0000000 --- a/tools/ota/add-property-tag.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include <ctype.h> -#include <errno.h> -#include <getopt.h> -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -/* - * Append a tag to a property value in a .prop file if it isn't already there. - * Normally used to modify build properties to record incremental updates. - */ - -// Return nonzero if the tag should be added to this line. -int should_tag(const char *line, const char *propname) { - const char *prop = strstr(line, propname); - if (prop == NULL) return 0; - - // Make sure this is actually the property name (not an accidental hit) - const char *ptr; - for (ptr = line; ptr < prop && isspace(*ptr); ++ptr) ; - if (ptr != prop) return 0; // Must be at the beginning of the line - - for (ptr += strlen(propname); *ptr != '\0' && isspace(*ptr); ++ptr) ; - return (*ptr == '='); // Must be followed by a '=' -} - -// Remove existing tags from the line, return the following number (if any) -int remove_tag(char *line, const char *tag) { - char *pos = strstr(line, tag); - if (pos == NULL) return 0; - - char *end; - int num = strtoul(pos + strlen(tag), &end, 10); - strcpy(pos, end); - return num; -} - -// Write line to output with the tag added, adding a number (if >0) -void write_tagged(FILE *out, const char *line, const char *tag, int number) { - const char *end = line + strlen(line); - while (end > line && isspace(end[-1])) --end; - if (number > 0) { - fprintf(out, "%.*s%s%d%s", end - line, line, tag, number, end); - } else { - fprintf(out, "%.*s%s%s", end - line, line, tag, end); - } -} - -int main(int argc, char **argv) { - const char *filename = "/system/build.prop"; - const char *propname = "ro.build.fingerprint"; - const char *tag = NULL; - int do_remove = 0, do_number = 0; - - int opt; - while ((opt = getopt(argc, argv, "f:p:rn")) != -1) { - switch (opt) { - case 'f': filename = optarg; break; - case 'p': propname = optarg; break; - case 'r': do_remove = 1; break; - case 'n': do_number = 1; break; - case '?': return 2; - } - } - - if (argc != optind + 1) { - fprintf(stderr, - "usage: add-property-tag [flags] tag-to-add\n" - "flags: -f /dir/file.prop (default /system/build.prop)\n" - " -p prop.name (default ro.build.fingerprint)\n" - " -r (if set, remove the tag rather than adding it)\n" - " -n (if set, add and increment a number after the tag)\n"); - return 2; - } - - tag = argv[optind]; - FILE *input = fopen(filename, "r"); - if (input == NULL) { - fprintf(stderr, "can't read %s: %s\n", filename, strerror(errno)); - return 1; - } - - char tmpname[PATH_MAX]; - snprintf(tmpname, sizeof(tmpname), "%s.tmp", filename); - FILE *output = fopen(tmpname, "w"); - if (output == NULL) { - fprintf(stderr, "can't write %s: %s\n", tmpname, strerror(errno)); - return 1; - } - - int found = 0; - char line[4096]; - while (fgets(line, sizeof(line), input)) { - if (!should_tag(line, propname)) { - fputs(line, output); // Pass through unmodified - } else { - found = 1; - int number = remove_tag(line, tag); - if (do_remove) { - fputs(line, output); // Remove the tag but don't re-add it - } else { - write_tagged(output, line, tag, number + do_number); - } - } - } - - fclose(input); - fclose(output); - - if (!found) { - fprintf(stderr, "property %s not found in %s\n", propname, filename); - remove(tmpname); - return 1; - } - - if (rename(tmpname, filename)) { - fprintf(stderr, "can't rename %s to %s: %s\n", - tmpname, filename, strerror(errno)); - remove(tmpname); - return 1; - } - - return 0; -} diff --git a/tools/ota/check-lost+found.c b/tools/ota/check-lost+found.c deleted file mode 100644 index f856275..0000000 --- a/tools/ota/check-lost+found.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include <dirent.h> -#include <errno.h> -#include <fcntl.h> -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <sys/klog.h> -#include <sys/reboot.h> -#include <sys/stat.h> -#include <sys/types.h> -#include <time.h> - -#include "private/android_filesystem_config.h" - -// Sentinel file used to track whether we've forced a reboot -static const char *kMarkerFile = "/data/misc/check-lost+found-rebooted-2"; - -// Output file in tombstones directory (first 8K will be uploaded) -static const char *kOutputDir = "/data/tombstones"; -static const char *kOutputFile = "/data/tombstones/check-lost+found-log"; - -// Partitions to check -static const char *kPartitions[] = { "/system", "/data", "/cache", NULL }; - -/* - * 1. If /data/misc/forced-reboot is missing, touch it & force "unclean" boot. - * 2. Write a log entry with the number of files in lost+found directories. - */ - -int main(int argc, char **argv) { - mkdir(kOutputDir, 0755); - chown(kOutputDir, AID_SYSTEM, AID_SYSTEM); - FILE *out = fopen(kOutputFile, "a"); - if (out == NULL) { - fprintf(stderr, "Can't write %s: %s\n", kOutputFile, strerror(errno)); - return 1; - } - - // Note: only the first 8K of log will be uploaded, so be terse. - time_t start = time(NULL); - fprintf(out, "*** check-lost+found ***\nStarted: %s", ctime(&start)); - - struct stat st; - if (stat(kMarkerFile, &st)) { - // No reboot marker -- need to force an unclean reboot. - // But first, try to create the marker file. If that fails, - // skip the reboot, so we don't get caught in an infinite loop. - - int fd = open(kMarkerFile, O_WRONLY|O_CREAT, 0444); - if (fd >= 0 && close(fd) == 0) { - fprintf(out, "Wrote %s, rebooting\n", kMarkerFile); - fflush(out); - sync(); // Make sure the marker file is committed to disk - - // If possible, dirty each of these partitions before rebooting, - // to make sure the filesystem has to do a scan on mount. - int i; - for (i = 0; kPartitions[i] != NULL; ++i) { - char fn[PATH_MAX]; - snprintf(fn, sizeof(fn), "%s/%s", kPartitions[i], "dirty"); - fd = open(fn, O_WRONLY|O_CREAT, 0444); - if (fd >= 0) { // Don't sweat it if we can't write the file. - write(fd, fn, sizeof(fn)); // write, you know, some data - close(fd); - unlink(fn); - } - } - - reboot(RB_AUTOBOOT); // reboot immediately, with dirty filesystems - fprintf(out, "Reboot failed?!\n"); - exit(1); - } else { - fprintf(out, "Can't write %s: %s\n", kMarkerFile, strerror(errno)); - } - } else { - fprintf(out, "Found %s\n", kMarkerFile); - } - - int i; - for (i = 0; kPartitions[i] != NULL; ++i) { - char fn[PATH_MAX]; - snprintf(fn, sizeof(fn), "%s/%s", kPartitions[i], "lost+found"); - DIR *dir = opendir(fn); - if (dir == NULL) { - fprintf(out, "Can't open %s: %s\n", fn, strerror(errno)); - } else { - int count = 0; - struct dirent *ent; - while ((ent = readdir(dir))) { - if (strcmp(ent->d_name, ".") && strcmp(ent->d_name, "..")) - ++count; - } - closedir(dir); - if (count > 0) { - fprintf(out, "OMGZ FOUND %d FILES IN %s\n", count, fn); - } else { - fprintf(out, "%s is clean\n", fn); - } - } - } - - char dmesg[131073]; - int len = klogctl(KLOG_READ_ALL, dmesg, sizeof(dmesg) - 1); - if (len < 0) { - fprintf(out, "Can't read kernel log: %s\n", strerror(errno)); - } else { // To conserve space, only write lines with certain keywords - fprintf(out, "--- Kernel log ---\n"); - dmesg[len] = '\0'; - char *saveptr, *line; - int in_yaffs = 0; - for (line = strtok_r(dmesg, "\n", &saveptr); line != NULL; - line = strtok_r(NULL, "\n", &saveptr)) { - if (strstr(line, "yaffs: dev is")) in_yaffs = 1; - - if (in_yaffs || - strstr(line, "yaffs") || - strstr(line, "mtd") || - strstr(line, "msm_nand")) { - fprintf(out, "%s\n", line); - } - - if (strstr(line, "yaffs_read_super: isCheckpointed")) in_yaffs = 0; - } - } - - return 0; -} diff --git a/tools/ota/convert-to-bmp.py b/tools/ota/convert-to-bmp.py deleted file mode 100644 index 446c09d..0000000 --- a/tools/ota/convert-to-bmp.py +++ /dev/null @@ -1,79 +0,0 @@ -#!/usr/bin/python2.4 - -"""A simple script to convert asset images to BMP files, that supports -RGBA image.""" - -import struct -import Image -import sys - -infile = sys.argv[1] -outfile = sys.argv[2] - -if not outfile.endswith(".bmp"): - print >> sys.stderr, "Warning: I'm expecting to write BMP files." - -im = Image.open(infile) -if im.mode == 'RGB': - im.save(outfile) -elif im.mode == 'RGBA': - # Python Imaging Library doesn't write RGBA BMP files, so we roll - # our own. - - BMP_HEADER_FMT = ("<" # little-endian - "H" # signature - "L" # file size - "HH" # reserved (set to 0) - "L" # offset to start of bitmap data) - ) - - BITMAPINFO_HEADER_FMT= ("<" # little-endian - "L" # size of this struct - "L" # width - "L" # height - "H" # planes (set to 1) - "H" # bit count - "L" # compression (set to 0 for minui) - "L" # size of image data (0 if uncompressed) - "L" # x pixels per meter (1) - "L" # y pixels per meter (1) - "L" # colors used (0) - "L" # important colors (0) - ) - - fileheadersize = struct.calcsize(BMP_HEADER_FMT) - infoheadersize = struct.calcsize(BITMAPINFO_HEADER_FMT) - - header = struct.pack(BMP_HEADER_FMT, - 0x4d42, # "BM" in little-endian - (fileheadersize + infoheadersize + - im.size[0] * im.size[1] * 4), - 0, 0, - fileheadersize + infoheadersize) - - info = struct.pack(BITMAPINFO_HEADER_FMT, - infoheadersize, - im.size[0], - im.size[1], - 1, - 32, - 0, - 0, - 1, - 1, - 0, - 0) - - f = open(outfile, "wb") - f.write(header) - f.write(info) - data = im.tostring() - for j in range(im.size[1]-1, -1, -1): # rows bottom-to-top - for i in range(j*im.size[0]*4, (j+1)*im.size[0]*4, 4): - f.write(data[i+2]) # B - f.write(data[i+1]) # G - f.write(data[i+0]) # R - f.write(data[i+3]) # A - f.close() -else: - print >> sys.stderr, "Don't know how to handle image mode '%s'." % (im.mode,) diff --git a/tools/ota/make-update-script.c b/tools/ota/make-update-script.c deleted file mode 100644 index 225dc52..0000000 --- a/tools/ota/make-update-script.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include "private/android_filesystem_config.h" - -#include <dirent.h> -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <unistd.h> - -/* - * Recursively walk the directory tree at <sysdir>/<subdir>, writing - * script commands to set permissions and create symlinks. - * Assume the contents already have the specified default permissions, - * so only output commands if they need to be changed from the defaults. - * - * Note that permissions are set by fs_config(), which uses a lookup table of - * Android permissions. They are not drawn from the build host filesystem. - */ -static void walk_files( - const char *sysdir, const char *subdir, - unsigned default_uid, unsigned default_gid, - unsigned default_dir_mode, unsigned default_file_mode) { - const char *sep = strcmp(subdir, "") ? "/" : ""; - - char fn[PATH_MAX]; - unsigned dir_uid = 0, dir_gid = 0, dir_mode = 0; - snprintf(fn, PATH_MAX, "system%s%s", sep, subdir); - fs_config(fn, 1, &dir_uid, &dir_gid, &dir_mode); - - snprintf(fn, PATH_MAX, "%s%s%s", sysdir, sep, subdir); - DIR *dir = opendir(fn); - if (dir == NULL) { - perror(fn); - exit(1); - } - - /* - * We can use "set_perm" and "set_perm_recursive" to set file permissions - * (owner, group, and file mode) for individual files and entire subtrees. - * We want to use set_perm_recursive efficiently to avoid setting the - * permissions of every single file in the system image individually. - * - * What we do is recursively set our entire subtree to the permissions - * used by the first file we encounter, and then use "set_perm" to adjust - * the permissions of subsequent files which don't match the first one. - * This is bad if the first file is an outlier, but it generally works. - * Subdirectories can do the same thing recursively if they're different. - */ - - int is_first = 1; - const struct dirent *e; - while ((e = readdir(dir))) { - // Skip over "." and ".." entries - if (!strcmp(e->d_name, ".") || !strcmp(e->d_name, "..")) continue; - - if (e->d_type == DT_LNK) { // Symlink - - // Symlinks don't really have permissions, so this is orthogonal. - snprintf(fn, PATH_MAX, "%s/%s%s%s", sysdir, subdir, sep, e->d_name); - int len = readlink(fn, fn, PATH_MAX - 1); - if (len <= 0) { - perror(fn); - exit(1); - } - fn[len] = '\0'; - printf("symlink %s SYSTEM:%s%s%s\n", fn, subdir, sep, e->d_name); - - } else if (e->d_type == DT_DIR) { // Subdirectory - - // Use the parent directory as the model for default permissions. - // We haven't seen a file, so just make up some file defaults. - if (is_first && ( - dir_mode != default_dir_mode || - dir_uid != default_uid || dir_gid != default_gid)) { - default_uid = dir_uid; - default_gid = dir_gid; - default_dir_mode = dir_mode; - default_file_mode = dir_mode & default_file_mode & 0666; - printf("set_perm_recursive %d %d 0%o 0%o SYSTEM:%s\n", - default_uid, default_gid, - default_dir_mode, default_file_mode, - subdir); - } - - is_first = 0; - - // Recursively handle the subdirectory. - // Note, the recursive call handles the directory's own permissions. - snprintf(fn, PATH_MAX, "%s%s%s", subdir, sep, e->d_name); - walk_files(sysdir, fn, - default_uid, default_gid, - default_dir_mode, default_file_mode); - - } else { // Ordinary file - - // Get the file's desired permissions. - unsigned file_uid = 0, file_gid = 0, file_mode = 0; - snprintf(fn, PATH_MAX, "system/%s%s%s", subdir, sep, e->d_name); - fs_config(fn, 0, &file_uid, &file_gid, &file_mode); - - // If this is the first file, its mode gets to become the default. - if (is_first && ( - dir_mode != default_dir_mode || - file_mode != default_file_mode || - dir_uid != default_uid || file_uid != default_uid || - dir_gid != default_gid || file_gid != default_gid)) { - default_uid = dir_uid; - default_gid = dir_gid; - default_dir_mode = dir_mode; - default_file_mode = file_mode; - printf("set_perm_recursive %d %d 0%o 0%o SYSTEM:%s\n", - default_uid, default_gid, - default_dir_mode, default_file_mode, - subdir); - } - - is_first = 0; - - // Otherwise, override this file if it doesn't match the defaults. - if (file_mode != default_file_mode || - file_uid != default_uid || file_gid != default_gid) { - printf("set_perm %d %d 0%o SYSTEM:%s%s%s\n", - file_uid, file_gid, file_mode, - subdir, sep, e->d_name); - } - - } - } - - // Set the directory's permissions directly, if they never got set. - if (dir_mode != default_dir_mode || - dir_uid != default_uid || dir_gid != default_gid) { - printf("set_perm %d %d 0%o SYSTEM:%s\n", - dir_uid, dir_gid, dir_mode, subdir); - } - - closedir(dir); -} - -/* - * Generate the update script (in "Amend", see commands/recovery/commands.c) - * for the complete-reinstall OTA update packages the build system makes. - * - * The generated script makes a variety of sanity checks about the device, - * erases and reinstalls system files, and sets file permissions appropriately. - */ -int main(int argc, char *argv[]) { - if (argc != 3) { - fprintf(stderr, "usage: %s systemdir android-info.txt >update-script\n", - argv[0]); - return 2; - } - - // ensure basic recovery script language compatibility - printf("assert compatible_with(\"0.2\") == \"true\"\n"); - - // if known, make sure the device name is correct - const char *device = getenv("TARGET_DEVICE"); - if (device != NULL) { - printf("assert getprop(\"ro.product.device\") == \"%s\" || " - "getprop(\"ro.build.product\") == \"%s\"\n", device, device); - } - - // scan android-info.txt to enforce compatibility with the target system - FILE *fp = fopen(argv[2], "r"); - if (fp == NULL) { - perror(argv[2]); - return 1; - } - - // The lines we're looking for look like: - // version-bootloader=x.yy.zzzz - // or: - // require version-bootloader=x.yy.zzzz - char line[256]; - while (fgets(line, sizeof(line), fp)) { - const char *name = strtok(line, "="), *value = strtok(NULL, "\n"); - if (value != NULL && - (!strcmp(name, "version-bootloader") || - !strcmp(name, "require version-bootloader"))) { - printf("assert getprop(\"ro.bootloader\") == \"%s\"\n", value); - } - // We also used to check version-baseband, but we update radio.img - // ourselves, so there's no need. - } - - // erase the boot sector first, so if the update gets interrupted, - // the system will reboot into the recovery partition and start over. - printf("format BOOT:\n"); - - // write the radio image (actually just loads it into RAM for now) - printf("show_progress 0.1 0\n"); - printf("write_radio_image PACKAGE:radio.img\n"); - - // erase and reinstall the system image - printf("show_progress 0.5 0\n"); - printf("format SYSTEM:\n"); - printf("copy_dir PACKAGE:system SYSTEM:\n"); - - // walk the files in the system image, set their permissions, etc. - // use -1 for default values to force permissions to be set explicitly. - walk_files(argv[1], "", -1, -1, -1, -1); - - // as the last step, write the boot sector. - printf("show_progress 0.2 0\n"); - printf("write_raw_image PACKAGE:boot.img BOOT:\n"); - - // after the end of the script, the radio will be written to cache - // leave some space in the progress bar for this operation - printf("show_progress 0.2 10\n"); - return 0; -} diff --git a/tools/ota/otatool b/tools/ota/otatool deleted file mode 100755 index 4b02629..0000000 --- a/tools/ota/otatool +++ /dev/null @@ -1,225 +0,0 @@ -#!/bin/bash -# -# Copyright (C) 2007 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -PROGNAME=`basename "$0"` - -INSTALL_SCRIPT_NAME=META-INF/com/android/update-script - -function cleantmp -{ - if [ ! -z "$TMPDIR" ] - then - rm -rf "$TMPDIR" - TMPDIR= - fi -} - -function println -{ - if [ $# -gt 0 ] - then - echo "$PROGNAME: $@" - fi -} - -function fail -{ - println "$@" - cleantmp - exit 1 -} - -function usage -{ - println "$@" - echo "Usage: $PROGNAME <command> [command-options] <ota-file>" - echo " Where <command> is one of:" - echo " --dump" - echo " Dump a description of the ota file" - echo " --dump-script" - echo " Dumps the install script to standard out" - echo " --append-script <file> -o|--output <outfile>" - echo " Append the contents of <file> to the install script" - echo " --replace-script <file> -o|--output <outfile>" - echo " Replace the install script with the contents of <file>" - fail -} - -if [ $# -lt 2 ] -then - usage -fi -CMD="$1" -shift -if [ "$CMD" = --dump ] -then - CMD_DUMP=1 - UNPACK_FILE=1 -elif [ "$CMD" = --dump-script ] -then - CMD_DUMP_SCRIPT=1 -elif [ "$CMD" = --append-script ] -then - CMD_APPEND_SCRIPT=1 - SCRIPT_FILE=$1 - shift - NEEDS_SCRIPT_FILE=1 - NEEDS_OUTPUT=1 -elif [ "$CMD" = --replace-script ] -then - CMD_REPLACE_SCRIPT=1 - SCRIPT_FILE=$1 - shift - NEEDS_SCRIPT_FILE=1 - NEEDS_OUTPUT=1 -else - usage "Unknown command $CMD" -fi - -if [ ! -z "$NEED_SCRIPT_FILE" ] -then - if [ -z "$SCRIPT_FILE" -o ! -f "$SCRIPT_FILE" ] - then - usage "$CMD requires a valid script file" - fi -fi - -if [ ! -z "$NEEDS_OUTPUT" ] -then - if [ "x$1" != "x-o" -a "x$1" != "x--output" ] - then - usage "$CMD requires \"-o <file>\" or \"--output <file>\"" - fi - shift - - OUTFILE="$1" - shift - if [ -z "$OUTFILE" ] - then - usage "$CMD requires \"-o <file>\" or \"--output <file>\"" - fi - if [ -d "$OUTFILE" ] - then - fail "Output file \"$OUTFILE\" is a directory" - fi -fi - -FILE="$1" -if [ ! -f "$FILE" ] -then - fail "$FILE doesn't exist or isn't a file" -fi -if [ ! -z "$OUTFILE" -a "$FILE" -ef "$OUTFILE" ] -then - fail "Refusing to use the input file as the output file" -fi - -if [ $CMD_DUMP_SCRIPT ] -then - unzip -p "$FILE" "$INSTALL_SCRIPT_NAME" - exit 0 -fi - -# Create a temporary directory for scratch files. -# -TMPDIR=`mktemp -d /tmp/$PROGNAME.XXXXXX` -if [ $? -ne 0 ] -then - TMPDIR= - fail "Can't create temporary directory" -fi - - -if [ $UNPACK_FILE ] -then - ROOTDIR="$TMPDIR/root" - mkdir -p "$ROOTDIR" - - println "Unpacking `basename $FILE`..." - - unzip -q -d "$ROOTDIR" "$FILE" - if [ $? -ne 0 ] - then - fail "Couldn't unpack $FILE" - fi -fi - - -if [ $CMD_DUMP ] -then - function dumpfile - { - echo "BEGIN `basename $1`" - cat "$1" | sed -e 's/^/ /' - echo "END `basename $1`" - } - - echo Contents of root: - ls -1 "$ROOTDIR" | sed -e 's/^/ /' - echo - echo Contents of META-INF: - (cd "$ROOTDIR" && find META-INF -type f) | sed -e 's/^/ /' - - echo - dumpfile "$ROOTDIR/META-INF/MANIFEST.MF" - echo - dumpfile "$ROOTDIR/$INSTALL_SCRIPT_NAME" - echo - dumpfile "$ROOTDIR/android-product.txt" - echo - dumpfile "$ROOTDIR/system/build.prop" -fi - -if [ $CMD_APPEND_SCRIPT ] -then - TMPSCRIPT="$TMPDIR/script" - NEWSCRIPT="$TMPDIR/$INSTALL_SCRIPT_NAME" - unzip -p "$FILE" "$INSTALL_SCRIPT_NAME" > "$TMPSCRIPT" - if [ $? -ne 0 ] - then - fail "Couldn't extract $INSTALL_SCRIPT_NAME from $FILE" - fi - mkdir -p `dirname "$NEWSCRIPT"` - cat "$TMPSCRIPT" "$SCRIPT_FILE" > "$NEWSCRIPT" - - OVERWRITE_SCRIPT=1 -fi - -if [ $CMD_REPLACE_SCRIPT ] -then - NEWSCRIPT="$TMPDIR/$INSTALL_SCRIPT_NAME" - mkdir -p `dirname "$NEWSCRIPT"` - cp "$SCRIPT_FILE" "$NEWSCRIPT" - - OVERWRITE_SCRIPT=1 -fi - -if [ $OVERWRITE_SCRIPT ] -then - cp "$FILE" "$TMPDIR/outfile.zip" - (cd "$TMPDIR" && zip -qu outfile.zip "$INSTALL_SCRIPT_NAME") - if [ $? -ne 0 ] - then - fail "Couldn't add new $INSTALL_SCRIPT_NAME to output file" - fi - - rm -f "$OUTFILE" - mkdir -p `dirname "$OUTFILE"` - mv "$TMPDIR/outfile.zip" "$OUTFILE" -fi - -cleantmp |