From a37aa43aa596796f9d535f41092c14742761eb0d Mon Sep 17 00:00:00 2001
From: Steve Kondik <shade@chemlab.org>
Date: Tue, 6 Aug 2013 22:34:12 -0700
Subject: libbt: Add support for using two stop bits

 * This improves reliability on chips such as BCM4335.
 * Also externalize some configuration.

Change-Id: I1271f0c1c3e602c8bfe9f816f57c9cb6add04b3a
---
 libbt/include/bt_vendor_brcm.h |  5 +++++
 libbt/src/conf.c               |  5 +++++
 libbt/src/hardware.c           | 19 +++++++++++++++++++
 libbt/src/userial_vendor.c     | 26 +++++++++++++++++++++++---
 4 files changed, 52 insertions(+), 3 deletions(-)

diff --git a/libbt/include/bt_vendor_brcm.h b/libbt/include/bt_vendor_brcm.h
index 58feda0..9531df5 100644
--- a/libbt/include/bt_vendor_brcm.h
+++ b/libbt/include/bt_vendor_brcm.h
@@ -76,6 +76,11 @@
 #define FW_PRE_PATCH ""
 #endif
 
+/* Force use of two stop bits */
+#ifndef UART_FORCE_TWO_STOPBITS
+#define UART_FORCE_TWO_STOPBITS FALSE
+#endif
+
 /* The millisecond delay pauses on HCI transport after firmware patches
  * were downloaded. This gives some time for firmware to restart with
  * patches before host attempts to send down any HCI commands.
diff --git a/libbt/src/conf.c b/libbt/src/conf.c
index 39ac12e..8800991 100644
--- a/libbt/src/conf.c
+++ b/libbt/src/conf.c
@@ -37,6 +37,8 @@
 int userial_set_port(char *p_conf_name, char *p_conf_value, int param);
 int hw_set_patch_file_path(char *p_conf_name, char *p_conf_value, int param);
 int hw_set_patch_file_name(char *p_conf_name, char *p_conf_value, int param);
+int hw_set_pre_patch_file_name(char *p_conf_name, char *p_conf_value, int param);
+int userial_set_force_use_2_stop_bits(char *p_conf_name, char *p_conf_value, int param);
 #if (VENDOR_LIB_RUNTIME_TUNING_ENABLED == TRUE)
 int hw_set_patch_settlement_delay(char *p_conf_name, char *p_conf_value, int param);
 #endif
@@ -70,6 +72,9 @@ static const conf_entry_t conf_table[] = {
     {"UartPort", userial_set_port, 0},
     {"FwPatchFilePath", hw_set_patch_file_path, 0},
     {"FwPatchFileName", hw_set_patch_file_name, 0},
+    {"FwPrePatchFileName", hw_set_pre_patch_file_name, 0},
+    {"UartForceUse2StopBits", userial_set_force_use_2_stop_bits, 0},
+
 #if (VENDOR_LIB_RUNTIME_TUNING_ENABLED == TRUE)
     {"FwPatchSettlementDelay", hw_set_patch_settlement_delay, 0},
 #endif
diff --git a/libbt/src/hardware.c b/libbt/src/hardware.c
index 392704e..df20c9f 100644
--- a/libbt/src/hardware.c
+++ b/libbt/src/hardware.c
@@ -1335,6 +1335,25 @@ int hw_set_patch_file_name(char *p_conf_name, char *p_conf_value, int param)
     return 0;
 }
 
+/*******************************************************************************
+**
+** Function        hw_set_pre_patch_file_name
+**
+** Description     Give the specific firmware pre-patch filename
+**
+** Returns         0 : Success
+**                 Otherwise : Fail
+**
+*******************************************************************************/
+int hw_set_pre_patch_file_name(char *p_conf_name, char *p_conf_value, int param)
+{
+
+    strcpy(fw_prepatch_name, p_conf_value);
+
+    return 0;
+}
+
+
 #if (VENDOR_LIB_RUNTIME_TUNING_ENABLED == TRUE)
 /*******************************************************************************
 **
diff --git a/libbt/src/userial_vendor.c b/libbt/src/userial_vendor.c
index 1a745b5..5233d19 100755
--- a/libbt/src/userial_vendor.c
+++ b/libbt/src/userial_vendor.c
@@ -68,6 +68,7 @@ typedef struct
 ******************************************************************************/
 
 static vnd_userial_cb_t vnd_userial;
+static int vnd_userial_force_2stopbits = UART_FORCE_TWO_STOPBITS;
 
 /*****************************************************************************
 **   Helper Functions
@@ -215,10 +216,10 @@ int userial_vendor_open(tUSERIAL_CFG *p_cfg)
         return -1;
     }
 
-    if(p_cfg->fmt & USERIAL_STOPBITS_1)
-        stop_bits = 0;
-    else if(p_cfg->fmt & USERIAL_STOPBITS_2)
+    if(vnd_userial_force_2stopbits || (p_cfg->fmt & USERIAL_STOPBITS_2))
         stop_bits = CSTOPB;
+    else if(p_cfg->fmt & USERIAL_STOPBITS_1)
+        stop_bits = 0;
     else
     {
         ALOGE("userial vendor open: unsupported stop bits");
@@ -359,3 +360,22 @@ int userial_set_port(char *p_conf_name, char *p_conf_value, int param)
     return 0;
 }
 
+/*******************************************************************************
+**
+** Function        userial_set_force_use_2_stop_bits
+**
+** Description     Configure UART port name
+**
+** Returns         0 : Success
+**                 Otherwise : Fail
+**
+*******************************************************************************/
+int userial_set_force_use_2_stop_bits(char *p_conf_name, char *p_conf_value, int param)
+{
+    if (strcmp(p_conf_value, "true") == 0)
+        vnd_userial_force_2stopbits = TRUE;
+    else
+        vnd_userial_force_2stopbits = FALSE;
+    return 0;
+}
+
-- 
cgit v1.1