# Copyright (C) 2010 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # This file is the device-specific product definition file for # crespo. It lists all the overlays, files, modules and properties # that are specific to this hardware: i.e. those are device-specific # drivers, configuration files, settings, etc... # Note that crespo is not a fully open device. Some of the drivers # aren't publicly available in all circumstances, which means that some # of the hardware capabilities aren't present in builds where those # drivers aren't available. Such cases are handled by having this file # separated into two halves: this half here contains the parts that # are available to everyone, while another half in the vendor/ hierarchy # augments that set with the parts that are only relevant when all the # associated drivers are available. Aspects that are irrelevant but # harmless in no-driver builds should be kept here for simplicity and # transparency. There are two variants of the half that deals with # the unavailable drivers: one is directly checked into the unreleased # vendor tree and is used by engineers who have access to it. The other # is generated by setup-makefile.sh in the same directory as this files, # and is used by people who have access to binary versions of the drivers # but not to the original vendor tree. Be sure to update both. # These is the hardware-specific overlay, which points to the location # of hardware-specific resource overrides, typically the frameworks and # application settings that are stored in resourced. DEVICE_PACKAGE_OVERLAYS := device/samsung/aries-common/overlay # These are the hardware-specific configuration files PRODUCT_COPY_FILES := \ device/samsung/aries-common/vold.fstab:system/etc/vold.fstab \ device/samsung/aries-common/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc # Init files PRODUCT_COPY_FILES += \ device/samsung/aries-common/init.aries.rc:root/init.aries.rc \ device/samsung/aries-common/init.aries.gps.rc:root/init.aries.gps.rc \ device/samsung/aries-common/init.aries.usb.rc:root/init.aries.usb.rc \ device/samsung/aries-common/init.recovery.aries.rc:root/init.recovery.aries.rc \ device/samsung/aries-common/init.aries.usb.rc:recovery/root/usb.rc \ device/samsung/aries-common/fstab.aries:root/fstab.aries \ device/samsung/aries-common/lpm.rc:root/lpm.rc \ device/samsung/aries-common/ueventd.aries.rc:root/ueventd.aries.rc \ device/samsung/aries-common/setupdatadata.sh:root/sbin/setupdatadata.sh # Prebuilt kl keymaps PRODUCT_COPY_FILES += \ device/samsung/aries-common/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \ device/samsung/aries-common/sec_jack.kl:system/usr/keylayout/sec_jack.kl \ device/samsung/aries-common/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl # Generated kcm keymaps PRODUCT_PACKAGES := \ cypress-touchkey.kcm \ s3c-keypad.kcm # Filesystem management tools PRODUCT_PACKAGES += \ make_ext4fs \ setup_fs \ bml_over_mtd # Usb accessory PRODUCT_PACKAGES += \ com.android.future.usb.accessory # These are the OpenMAX IL configuration files PRODUCT_COPY_FILES += \ hardware/samsung/exynos3/s5pc110/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \ device/samsung/aries-common/media_profiles.xml:system/etc/media_profiles.xml \ device/samsung/aries-common/media_codecs.xml:system/etc/media_codecs.xml # These are the OpenMAX IL modules PRODUCT_PACKAGES += \ libSEC_OMX_Core \ libOMX.SEC.AVC.Decoder \ libOMX.SEC.M4V.Decoder \ libOMX.SEC.M4V.Encoder \ libOMX.SEC.AVC.Encoder # Misc other modules PRODUCT_PACKAGES += \ lights.aries \ sensors.aries \ power.s5pc110 \ hwcomposer.s5pc110 \ camera.aries \ audio.primary.aries \ audio.a2dp.default \ audio.usb.default \ libs3cjpeg PRODUCT_COPY_FILES += \ device/samsung/aries-common/libaudio/audio_policy.conf:system/etc/audio_policy.conf # Libs PRODUCT_PACKAGES += \ libstagefrighthw # Bluetooth MAC Address PRODUCT_PACKAGES += \ bdaddr_read # Device-specific packages PRODUCT_PACKAGES += \ SamsungServiceMode \ AriesParts \ tvouthack # Charger PRODUCT_PACKAGES += \ charger \ charger_res_images # These are the hardware-specific features PRODUCT_COPY_FILES += \ frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \ frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \ frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \ frameworks/native/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml \ frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \ frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \ frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \ frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml # The OpenGL ES API level that is natively supported by this device. # This is a 16.16 fixed point number PRODUCT_PROPERTY_OVERRIDES := \ ro.opengles.version=131072 # These are the hardware-specific settings that are stored in system properties. # Note that the only such settings should be the ones that are too low-level to # be reachable from resources or other mechanisms. PRODUCT_PROPERTY_OVERRIDES += \ wifi.interface=wlan0 \ ro.telephony.ril_class=SamsungExynos3RIL \ ro.telephony.ril.v3=icccardstatus,datacall,signalstrength,facilitylock \ mobiledata.interfaces=pdp0,eth0,gprs,ppp0 \ ro.vold.switchablepair=/mnt/emmc,/mnt/sdcard \ # enable Google-specific location features, # like NetworkLocationProvider and LocationCollector PRODUCT_PROPERTY_OVERRIDES += \ ro.com.google.locationfeatures=1 \ ro.com.google.networklocation=1 # Extended JNI checks # The extended JNI checks will cause the system to run more slowly, but they can spot a variety of nasty bugs # before they have a chance to cause problems. # Default=true for development builds, set by android buildsystem. PRODUCT_PROPERTY_OVERRIDES += \ ro.kernel.android.checkjni=0 \ dalvik.vm.checkjni=false # Override /proc/sys/vm/dirty_ratio on UMS PRODUCT_PROPERTY_OVERRIDES += \ ro.vold.umsdirtyratio=20 # We have sacrificed /cache for a larger /system, so it's not large enough for dalvik cache PRODUCT_PROPERTY_OVERRIDES += \ dalvik.vm.dexopt-data-only=1 # Set default USB interface and default to internal SD as /sdcard PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage \ persist.sys.vold.switchexternal=1 include frameworks/native/build/phone-hdpi-512-dalvik-heap.mk # we have enough storage space to hold precise GC data PRODUCT_TAGS += dalvik.gc.type-precise PRODUCT_COPY_FILES += \ device/samsung/aries-common/updater.sh:updater.sh $(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4329/device-bcm.mk)