From f2a3063bc88ee0a075c04fa274c10c39c7abfc9b Mon Sep 17 00:00:00 2001 From: Roberto Gibellini Date: Sat, 19 Nov 2016 17:21:50 -0700 Subject: Revert "i9305 : second cleanup" I'll push single commits This reverts commit 2f6c7f36412046bd8b67ffbf511ffa74d7cc6842. Change-Id: I147666b0637e2950612653ad680b7a1f33e173f0 --- BoardConfig.mk | 4 +- cm.mk | 3 + include/telephony/ril.h | 5394 --------------------------------------------- selinux/device.te | 4 + selinux/dhcp.te | 1 + selinux/domain.te | 4 + selinux/file.te | 9 + selinux/file_contexts | 70 + selinux/init.te | 3 + selinux/kickstart.te | 44 + selinux/mediaserver.te | 8 + selinux/netmgrd.te | 29 + selinux/qmux.te | 21 + selinux/rild.te | 14 + selinux/secril.te | 25 + selinux/system.te | 12 + selinux/te_macros | 12 + selinux/ueventd.te | 11 + selinux/wpa_supplicant.te | 10 + 19 files changed, 281 insertions(+), 5397 deletions(-) delete mode 100644 include/telephony/ril.h create mode 100644 selinux/device.te create mode 100755 selinux/dhcp.te create mode 100644 selinux/domain.te create mode 100644 selinux/file.te create mode 100644 selinux/file_contexts create mode 100644 selinux/init.te create mode 100755 selinux/kickstart.te create mode 100644 selinux/mediaserver.te create mode 100755 selinux/netmgrd.te create mode 100755 selinux/qmux.te create mode 100755 selinux/rild.te create mode 100644 selinux/secril.te create mode 100755 selinux/system.te create mode 100755 selinux/te_macros create mode 100644 selinux/ueventd.te create mode 100755 selinux/wpa_supplicant.te diff --git a/BoardConfig.mk b/BoardConfig.mk index f5f2f2d..660414c 100644 --- a/BoardConfig.mk +++ b/BoardConfig.mk @@ -14,13 +14,11 @@ # limitations under the License. # --include device/samsung/smdk4412-common/BoardCommonConfig.mk -include device/samsung/smdk4412-qcom-common/BoardCommonConfig.mk +-include device/samsung/smdk4412-common/BoardCommonConfig.mk LOCAL_PATH := device/samsung/i9305 -TARGET_SPECIFIC_HEADER_PATH += $(LOCAL_PATH)/include - # Bluetooth BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth diff --git a/cm.mk b/cm.mk index 02230f6..8ce223f 100644 --- a/cm.mk +++ b/cm.mk @@ -1,3 +1,6 @@ +# Specify phone tech before including full_phone +$(call inherit-product, vendor/cm/config/gsm.mk) + # Release name PRODUCT_RELEASE_NAME := i9305 diff --git a/include/telephony/ril.h b/include/telephony/ril.h deleted file mode 100644 index e13ad9f..0000000 --- a/include/telephony/ril.h +++ /dev/null @@ -1,5394 +0,0 @@ -/* - * Copyright (C) 2006 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_RIL_H -#define ANDROID_RIL_H 1 - -#include -#include -#include -#include -#include - -#ifndef FEATURE_UNIT_TEST -#include -#endif /* !FEATURE_UNIT_TEST */ - -#ifdef __cplusplus -extern "C" { -#endif - - -#if defined(ANDROID_SIM_COUNT_2) -#define SIM_COUNT 2 -#elif defined(ANDROID_SIM_COUNT_3) -#define SIM_COUNT 3 -#elif defined(ANDROID_SIM_COUNT_4) -#define SIM_COUNT 4 -#else -#define SIM_COUNT 1 -#endif - -#ifndef ANDROID_MULTI_SIM -#define SIM_COUNT 1 -#endif - -#define RIL_VERSION 11 /* Current version */ -#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */ - -#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64 -#define CDMA_NUMBER_INFO_BUFFER_LENGTH 81 - -#define MAX_RILDS 3 -#define MAX_SOCKET_NAME_LENGTH 6 -#define MAX_CLIENT_ID_LENGTH 2 -#define MAX_DEBUG_SOCKET_NAME_LENGTH 12 -#define MAX_QEMU_PIPE_NAME_LENGTH 11 -#define MAX_UUID_LENGTH 64 - - -typedef void * RIL_Token; - -typedef enum { - RIL_SOCKET_1, -#if (SIM_COUNT >= 2) - RIL_SOCKET_2, -#if (SIM_COUNT >= 3) - RIL_SOCKET_3, -#endif -#if (SIM_COUNT >= 4) - RIL_SOCKET_4, -#endif -#endif - RIL_SOCKET_NUM -} RIL_SOCKET_ID; - - -typedef enum { - RIL_E_SUCCESS = 0, - RIL_E_RADIO_NOT_AVAILABLE = 1, /* If radio did not start or is resetting */ - RIL_E_GENERIC_FAILURE = 2, - RIL_E_PASSWORD_INCORRECT = 3, /* for PIN/PIN2 methods only! */ - RIL_E_SIM_PIN2 = 4, /* Operation requires SIM PIN2 to be entered */ - RIL_E_SIM_PUK2 = 5, /* Operation requires SIM PIN2 to be entered */ - RIL_E_REQUEST_NOT_SUPPORTED = 6, - RIL_E_CANCELLED = 7, - RIL_E_OP_NOT_ALLOWED_DURING_VOICE_CALL = 8, /* data ops are not allowed during voice - call on a Class C GPRS device */ - RIL_E_OP_NOT_ALLOWED_BEFORE_REG_TO_NW = 9, /* data ops are not allowed before device - registers in network */ - RIL_E_SMS_SEND_FAIL_RETRY = 10, /* fail to send sms and need retry */ - RIL_E_SIM_ABSENT = 11, /* fail to set the location where CDMA subscription - shall be retrieved because of SIM or RUIM - card absent */ - RIL_E_SUBSCRIPTION_NOT_AVAILABLE = 12, /* fail to find CDMA subscription from specified - location */ - RIL_E_MODE_NOT_SUPPORTED = 13, /* HW does not support preferred network type */ - RIL_E_FDN_CHECK_FAILURE = 14, /* command failed because recipient is not on FDN list */ - RIL_E_ILLEGAL_SIM_OR_ME = 15, /* network selection failed due to - illegal SIM or ME */ - RIL_E_MISSING_RESOURCE = 16, /* no logical channel available */ - RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */ - RIL_E_DIAL_MODIFIED_TO_USSD = 18, /* DIAL request modified to USSD */ - RIL_E_DIAL_MODIFIED_TO_SS = 19, /* DIAL request modified to SS */ - RIL_E_DIAL_MODIFIED_TO_DIAL = 20, /* DIAL request modified to DIAL with different - data */ - RIL_E_USSD_MODIFIED_TO_DIAL = 21, /* USSD request modified to DIAL */ - RIL_E_USSD_MODIFIED_TO_SS = 22, /* USSD request modified to SS */ - RIL_E_USSD_MODIFIED_TO_USSD = 23, /* USSD request modified to different USSD - request */ - RIL_E_SS_MODIFIED_TO_DIAL = 24, /* SS request modified to DIAL */ - RIL_E_SS_MODIFIED_TO_USSD = 25, /* SS request modified to USSD */ - RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26, /* Subscription not supported by RIL */ - RIL_E_SS_MODIFIED_TO_SS = 27 /* SS request modified to different SS request */ - - -} RIL_Errno; - -typedef enum { - RIL_CALL_ACTIVE = 0, - RIL_CALL_HOLDING = 1, - RIL_CALL_DIALING = 2, /* MO call only */ - RIL_CALL_ALERTING = 3, /* MO call only */ - RIL_CALL_INCOMING = 4, /* MT call only */ - RIL_CALL_WAITING = 5 /* MT call only */ -} RIL_CallState; - -typedef enum { - RADIO_STATE_OFF = 0, /* Radio explictly powered off (eg CFUN=0) */ - RADIO_STATE_UNAVAILABLE = 1, /* Radio unavailable (eg, resetting or not booted) */ - /* States 2-9 below are deprecated. Just leaving them here for backward compatibility. */ - RADIO_STATE_SIM_NOT_READY = 2, /* Radio is on, but the SIM interface is not ready */ - RADIO_STATE_SIM_LOCKED_OR_ABSENT = 3, /* SIM PIN locked, PUK required, network - personalization locked, or SIM absent */ - RADIO_STATE_SIM_READY = 4, /* Radio is on and SIM interface is available */ - RADIO_STATE_RUIM_NOT_READY = 5, /* Radio is on, but the RUIM interface is not ready */ - RADIO_STATE_RUIM_READY = 6, /* Radio is on and the RUIM interface is available */ - RADIO_STATE_RUIM_LOCKED_OR_ABSENT = 7, /* RUIM PIN locked, PUK required, network - personalization locked, or RUIM absent */ - RADIO_STATE_NV_NOT_READY = 8, /* Radio is on, but the NV interface is not available */ - RADIO_STATE_NV_READY = 9, /* Radio is on and the NV interface is available */ - RADIO_STATE_ON = 10 /* Radio is on */ -} RIL_RadioState; - -typedef enum { - RADIO_TECH_UNKNOWN = 0, - RADIO_TECH_GPRS = 1, - RADIO_TECH_EDGE = 2, - RADIO_TECH_UMTS = 3, - RADIO_TECH_IS95A = 4, - RADIO_TECH_IS95B = 5, - RADIO_TECH_1xRTT = 6, - RADIO_TECH_EVDO_0 = 7, - RADIO_TECH_EVDO_A = 8, - RADIO_TECH_HSDPA = 9, - RADIO_TECH_HSUPA = 10, - RADIO_TECH_HSPA = 11, - RADIO_TECH_EVDO_B = 12, - RADIO_TECH_EHRPD = 13, - RADIO_TECH_LTE = 14, - RADIO_TECH_HSPAP = 15, // HSPA+ - RADIO_TECH_GSM = 16, // Only supports voice - RADIO_TECH_TD_SCDMA = 17, - RADIO_TECH_IWLAN = 18 -} RIL_RadioTechnology; - -typedef enum { - RAF_UNKNOWN = (1 << RADIO_TECH_UNKNOWN), - RAF_GPRS = (1 << RADIO_TECH_GPRS), - RAF_EDGE = (1 << RADIO_TECH_EDGE), - RAF_UMTS = (1 << RADIO_TECH_UMTS), - RAF_IS95A = (1 << RADIO_TECH_IS95A), - RAF_IS95B = (1 << RADIO_TECH_IS95B), - RAF_1xRTT = (1 << RADIO_TECH_1xRTT), - RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0), - RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A), - RAF_HSDPA = (1 << RADIO_TECH_HSDPA), - RAF_HSUPA = (1 << RADIO_TECH_HSUPA), - RAF_HSPA = (1 << RADIO_TECH_HSPA), - RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B), - RAF_EHRPD = (1 << RADIO_TECH_EHRPD), - RAF_LTE = (1 << RADIO_TECH_LTE), - RAF_HSPAP = (1 << RADIO_TECH_HSPAP), - RAF_GSM = (1 << RADIO_TECH_GSM), - RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA), -} RIL_RadioAccessFamily; - -typedef enum { - RC_PHASE_CONFIGURED = 0, // LM is configured is initial value and value after FINISH completes - RC_PHASE_START = 1, // START is sent before Apply and indicates that an APPLY will be - // forthcoming with these same parameters - RC_PHASE_APPLY = 2, // APPLY is sent after all LM's receive START and returned - // RIL_RadioCapability.status = 0, if any START's fail no - // APPLY will be sent - RC_PHASE_UNSOL_RSP = 3, // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY - RC_PHASE_FINISH = 4 // FINISH is sent after all commands have completed. If an error - // occurs in any previous command the RIL_RadioAccessesFamily and - // logicalModemUuid fields will be the prior configuration thus - // restoring the configuration to the previous value. An error - // returned by this command will generally be ignored or may - // cause that logical modem to be removed from service. -} RadioCapabilityPhase; - -typedef enum { - RC_STATUS_NONE = 0, // This parameter has no meaning with RC_PHASE_START, - // RC_PHASE_APPLY - RC_STATUS_SUCCESS = 1, // Tell modem the action transaction of set radio - // capability was success with RC_PHASE_FINISH - RC_STATUS_FAIL = 2, // Tell modem the action transaction of set radio - // capability is fail with RC_PHASE_FINISH. -} RadioCapabilityStatus; - -#define RIL_RADIO_CAPABILITY_VERSION 1 -typedef struct { - int version; // Version of structure, RIL_RADIO_CAPABILITY_VERSION - int session; // Unique session value defined by framework returned in all "responses/unsol" - int phase; // CONFIGURED, START, APPLY, FINISH - int rat; // RIL_RadioAccessFamily for the radio - char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem. - int status; // Return status and an input parameter for RC_PHASE_FINISH -} RIL_RadioCapability; - -// Do we want to split Data from Voice and the use -// RIL_RadioTechnology for get/setPreferredVoice/Data ? -typedef enum { - PREF_NET_TYPE_GSM_WCDMA = 0, /* GSM/WCDMA (WCDMA preferred) */ - PREF_NET_TYPE_GSM_ONLY = 1, /* GSM only */ - PREF_NET_TYPE_WCDMA = 2, /* WCDMA */ - PREF_NET_TYPE_GSM_WCDMA_AUTO = 3, /* GSM/WCDMA (auto mode, according to PRL) */ - PREF_NET_TYPE_CDMA_EVDO_AUTO = 4, /* CDMA and EvDo (auto mode, according to PRL) */ - PREF_NET_TYPE_CDMA_ONLY = 5, /* CDMA only */ - PREF_NET_TYPE_EVDO_ONLY = 6, /* EvDo only */ - PREF_NET_TYPE_GSM_WCDMA_CDMA_EVDO_AUTO = 7, /* GSM/WCDMA, CDMA, and EvDo (auto mode, according to PRL) */ - PREF_NET_TYPE_LTE_CDMA_EVDO = 8, /* LTE, CDMA and EvDo */ - PREF_NET_TYPE_LTE_GSM_WCDMA = 9, /* LTE, GSM/WCDMA */ - PREF_NET_TYPE_LTE_CMDA_EVDO_GSM_WCDMA = 10, /* LTE, CDMA, EvDo, GSM/WCDMA */ - PREF_NET_TYPE_LTE_ONLY = 11, /* LTE only */ - PREF_NET_TYPE_LTE_WCDMA = 12 /* LTE/WCDMA */ -} RIL_PreferredNetworkType; - -/* Source for cdma subscription */ -typedef enum { - CDMA_SUBSCRIPTION_SOURCE_RUIM_SIM = 0, - CDMA_SUBSCRIPTION_SOURCE_NV = 1 -} RIL_CdmaSubscriptionSource; - -/* User-to-User signaling Info activation types derived from 3GPP 23.087 v8.0 */ -typedef enum { - RIL_UUS_TYPE1_IMPLICIT = 0, - RIL_UUS_TYPE1_REQUIRED = 1, - RIL_UUS_TYPE1_NOT_REQUIRED = 2, - RIL_UUS_TYPE2_REQUIRED = 3, - RIL_UUS_TYPE2_NOT_REQUIRED = 4, - RIL_UUS_TYPE3_REQUIRED = 5, - RIL_UUS_TYPE3_NOT_REQUIRED = 6 -} RIL_UUS_Type; - -/* User-to-User Signaling Information data coding schemes. Possible values for - * Octet 3 (Protocol Discriminator field) in the UUIE. The values have been - * specified in section 10.5.4.25 of 3GPP TS 24.008 */ -typedef enum { - RIL_UUS_DCS_USP = 0, /* User specified protocol */ - RIL_UUS_DCS_OSIHLP = 1, /* OSI higher layer protocol */ - RIL_UUS_DCS_X244 = 2, /* X.244 */ - RIL_UUS_DCS_RMCF = 3, /* Reserved for system mangement - convergence function */ - RIL_UUS_DCS_IA5c = 4 /* IA5 characters */ -} RIL_UUS_DCS; - -/* User-to-User Signaling Information defined in 3GPP 23.087 v8.0 - * This data is passed in RIL_ExtensionRecord and rec contains this - * structure when type is RIL_UUS_INFO_EXT_REC */ -typedef struct { - RIL_UUS_Type uusType; /* UUS Type */ - RIL_UUS_DCS uusDcs; /* UUS Data Coding Scheme */ - int uusLength; /* Length of UUS Data */ - char * uusData; /* UUS Data */ -} RIL_UUS_Info; - -/* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */ -typedef struct { - char isPresent; /* non-zero if signal information record is present */ - char signalType; /* as defined 3.7.5.5-1 */ - char alertPitch; /* as defined 3.7.5.5-2 */ - char signal; /* as defined 3.7.5.5-3, 3.7.5.5-4 or 3.7.5.5-5 */ -} RIL_CDMA_SignalInfoRecord; - -typedef struct { - RIL_CallState state; - int index; /* Connection Index for use with, eg, AT+CHLD */ - int toa; /* type of address, eg 145 = intl */ - char isMpty; /* nonzero if is mpty call */ - char isMT; /* nonzero if call is mobile terminated */ - char als; /* ALS line indicator if available - (0 = line 1) */ - char isVoice; /* nonzero if this is is a voice call */ - char isVoicePrivacy; /* nonzero if CDMA voice privacy mode is active */ - char * number; /* Remote party number */ - int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */ - char * name; /* Remote party name */ - int namePresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */ - RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */ -} RIL_Call; - -/* Deprecated, use RIL_Data_Call_Response_v6 */ -typedef struct { - int cid; /* Context ID, uniquely identifies this call */ - int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ - char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. - For example, "IP", "IPV6", "IPV4V6", or "PPP". */ - char * apn; /* ignored */ - char * address; /* An address, e.g., "192.0.1.3" or "2001:db8::1". */ -} RIL_Data_Call_Response_v4; - -/* - * Returned by RIL_REQUEST_SETUP_DATA_CALL, RIL_REQUEST_DATA_CALL_LIST - * and RIL_UNSOL_DATA_CALL_LIST_CHANGED, on error status != 0. - */ -typedef struct { - int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ - int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry - back-off timer value RIL wants to override the one - pre-configured in FW. - The unit is miliseconds. - The value < 0 means no value is suggested. - The value 0 means retry should be done ASAP. - The value of INT_MAX(0x7fffffff) means no retry. */ - int cid; /* Context ID, uniquely identifies this call */ - int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ - char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. - For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is - PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported - such as "IP" or "IPV6" */ - char * ifname; /* The network interface name */ - char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, - e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". - May not be empty, typically 1 IPv4 or 1 IPv6 or - one of each. If the prefix length is absent the addresses - are assumed to be point to point with IPv4 having a prefix - length of 32 and IPv6 128. */ - char * dnses; /* A space-delimited list of DNS server addresses, - e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". - May be empty. */ - char * gateways; /* A space-delimited list of default gateway addresses, - e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". - May be empty in which case the addresses represent point - to point connections. */ -} RIL_Data_Call_Response_v6; - -typedef struct { - int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ - int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry - back-off timer value RIL wants to override the one - pre-configured in FW. - The unit is miliseconds. - The value < 0 means no value is suggested. - The value 0 means retry should be done ASAP. - The value of INT_MAX(0x7fffffff) means no retry. */ - int cid; /* Context ID, uniquely identifies this call */ - int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ - char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. - For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is - PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported - such as "IP" or "IPV6" */ - char * ifname; /* The network interface name */ - char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, - e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". - May not be empty, typically 1 IPv4 or 1 IPv6 or - one of each. If the prefix length is absent the addresses - are assumed to be point to point with IPv4 having a prefix - length of 32 and IPv6 128. */ - char * dnses; /* A space-delimited list of DNS server addresses, - e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". - May be empty. */ - char * gateways; /* A space-delimited list of default gateway addresses, - e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". - May be empty in which case the addresses represent point - to point connections. */ - char * pcscf; /* the Proxy Call State Control Function address - via PCO(Protocol Configuration Option) for IMS client. */ -} RIL_Data_Call_Response_v9; - -typedef struct { - int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ - int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry - back-off timer value RIL wants to override the one - pre-configured in FW. - The unit is miliseconds. - The value < 0 means no value is suggested. - The value 0 means retry should be done ASAP. - The value of INT_MAX(0x7fffffff) means no retry. */ - int cid; /* Context ID, uniquely identifies this call */ - int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ - char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. - For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is - PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported - such as "IP" or "IPV6" */ - char * ifname; /* The network interface name */ - char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, - e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". - May not be empty, typically 1 IPv4 or 1 IPv6 or - one of each. If the prefix length is absent the addresses - are assumed to be point to point with IPv4 having a prefix - length of 32 and IPv6 128. */ - char * dnses; /* A space-delimited list of DNS server addresses, - e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". - May be empty. */ - char * gateways; /* A space-delimited list of default gateway addresses, - e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". - May be empty in which case the addresses represent point - to point connections. */ - char * pcscf; /* the Proxy Call State Control Function address - via PCO(Protocol Configuration Option) for IMS client. */ - int mtu; /* MTU received from network - Value <= 0 means network has either not sent a value or - sent an invalid value */ -} RIL_Data_Call_Response_v11; - -typedef enum { - RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */ - RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */ -} RIL_RadioTechnologyFamily; - -typedef struct { - RIL_RadioTechnologyFamily tech; - unsigned char retry; /* 0 == not retry, nonzero == retry */ - int messageRef; /* Valid field if retry is set to nonzero. - Contains messageRef from RIL_SMS_Response - corresponding to failed MO SMS. - */ - - union { - /* Valid field if tech is RADIO_TECH_3GPP2. See RIL_REQUEST_CDMA_SEND_SMS */ - RIL_CDMA_SMS_Message* cdmaMessage; - - /* Valid field if tech is RADIO_TECH_3GPP. See RIL_REQUEST_SEND_SMS */ - char** gsmMessage; - } message; -} RIL_IMS_SMS_Message; - -typedef struct { - int messageRef; /* TP-Message-Reference for GSM, - and BearerData MessageId for CDMA - (See 3GPP2 C.S0015-B, v2.0, table 4.5-1). */ - char *ackPDU; /* or NULL if n/a */ - int errorCode; /* See 3GPP 27.005, 3.2.5 for GSM/UMTS, - 3GPP2 N.S0005 (IS-41C) Table 171 for CDMA, - -1 if unknown or not applicable*/ -} RIL_SMS_Response; - -/** Used by RIL_REQUEST_WRITE_SMS_TO_SIM */ -typedef struct { - int status; /* Status of message. See TS 27.005 3.1, "": */ - /* 0 = "REC UNREAD" */ - /* 1 = "REC READ" */ - /* 2 = "STO UNSENT" */ - /* 3 = "STO SENT" */ - char * pdu; /* PDU of message to write, as an ASCII hex string less the SMSC address, - the TP-layer length is "strlen(pdu)/2". */ - char * smsc; /* SMSC address in GSM BCD format prefixed by a length byte - (as expected by TS 27.005) or NULL for default SMSC */ -} RIL_SMS_WriteArgs; - -/** Used by RIL_REQUEST_DIAL */ -typedef struct { - char * address; - int clir; - /* (same as 'n' paremeter in TS 27.007 7.7 "+CLIR" - * clir == 0 on "use subscription default value" - * clir == 1 on "CLIR invocation" (restrict CLI presentation) - * clir == 2 on "CLIR suppression" (allow CLI presentation) - */ - RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */ -} RIL_Dial; - -typedef struct { - int command; /* one of the commands listed for TS 27.007 +CRSM*/ - int fileid; /* EF id */ - char *path; /* "pathid" from TS 27.007 +CRSM command. - Path is in hex asciii format eg "7f205f70" - Path must always be provided. - */ - int p1; - int p2; - int p3; - char *data; /* May be NULL*/ - char *pin2; /* May be NULL*/ -} RIL_SIM_IO_v5; - -typedef struct { - int command; /* one of the commands listed for TS 27.007 +CRSM*/ - int fileid; /* EF id */ - char *path; /* "pathid" from TS 27.007 +CRSM command. - Path is in hex asciii format eg "7f205f70" - Path must always be provided. - */ - int p1; - int p2; - int p3; - char *data; /* May be NULL*/ - char *pin2; /* May be NULL*/ - char *aidPtr; /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */ -} RIL_SIM_IO_v6; - -/* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and - * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */ -typedef struct { - int sessionid; /* "sessionid" from TS 27.007 +CGLA command. Should be - ignored for +CSIM command. */ - - /* Following fields are used to derive the APDU ("command" and "length" - values in TS 27.007 +CSIM and +CGLA commands). */ - int cla; - int instruction; - int p1; - int p2; - int p3; /* A negative P3 implies a 4 byte APDU. */ - char *data; /* May be NULL. In hex string format. */ -} RIL_SIM_APDU; - -typedef struct { - int sw1; - int sw2; - char *simResponse; /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION - response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */ -} RIL_SIM_IO_Response; - -/* See also com.android.internal.telephony.gsm.CallForwardInfo */ - -typedef struct { - int status; /* - * For RIL_REQUEST_QUERY_CALL_FORWARD_STATUS - * status 1 = active, 0 = not active - * - * For RIL_REQUEST_SET_CALL_FORWARD: - * status is: - * 0 = disable - * 1 = enable - * 2 = interrogate - * 3 = registeration - * 4 = erasure - */ - - int reason; /* from TS 27.007 7.11 "reason" */ - int serviceClass;/* From 27.007 +CCFC/+CLCK "class" - See table for Android mapping from - MMI service code - 0 means user doesn't input class */ - int toa; /* "type" from TS 27.007 7.11 */ - char * number; /* "number" from TS 27.007 7.11. May be NULL */ - int timeSeconds; /* for CF no reply only */ -}RIL_CallForwardInfo; - -typedef struct { - char * cid; /* Combination of LAC and Cell Id in 32 bits in GSM. - * Upper 16 bits is LAC and lower 16 bits - * is CID (as described in TS 27.005) - * Primary Scrambling Code (as described in TS 25.331) - * in 9 bits in UMTS - * Valid values are hexadecimal 0x0000 - 0xffffffff. - */ - int rssi; /* Received RSSI in GSM, - * Level index of CPICH Received Signal Code Power in UMTS - */ -} RIL_NeighboringCell; - -typedef struct { - char lce_status; /* LCE service status: - * -1 = not supported; - * 0 = stopped; - * 1 = active. - */ - unsigned int actual_interval_ms; /* actual LCE reporting interval, - * meaningful only if LCEStatus = 1. - */ -} RIL_LceStatusInfo; - -typedef struct { - unsigned int last_hop_capacity_kbps; /* last-hop cellular capacity: kilobits/second. */ - unsigned char confidence_level; /* capacity estimate confidence: 0-100 */ - unsigned char lce_suspended; /* LCE report going to be suspended? (e.g., radio - * moves to inactive state or network type change) - * 1 = suspended; - * 0 = not suspended. - */ -} RIL_LceDataInfo; - -/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */ -typedef enum { - CALL_FAIL_UNOBTAINABLE_NUMBER = 1, - CALL_FAIL_NORMAL = 16, - CALL_FAIL_BUSY = 17, - CALL_FAIL_CONGESTION = 34, - CALL_FAIL_ACM_LIMIT_EXCEEDED = 68, - CALL_FAIL_CALL_BARRED = 240, - CALL_FAIL_FDN_BLOCKED = 241, - CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242, - CALL_FAIL_IMEI_NOT_ACCEPTED = 243, - CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */ - CALL_FAIL_DIAL_MODIFIED_TO_SS = 245, - CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246, - CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000, - CALL_FAIL_CDMA_DROP = 1001, - CALL_FAIL_CDMA_INTERCEPT = 1002, - CALL_FAIL_CDMA_REORDER = 1003, - CALL_FAIL_CDMA_SO_REJECT = 1004, - CALL_FAIL_CDMA_RETRY_ORDER = 1005, - CALL_FAIL_CDMA_ACCESS_FAILURE = 1006, - CALL_FAIL_CDMA_PREEMPTED = 1007, - CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed - during emergency callback mode */ - CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */ - CALL_FAIL_ERROR_UNSPECIFIED = 0xffff -} RIL_LastCallFailCause; - -typedef struct { - RIL_LastCallFailCause cause_code; - char * vendor_cause; -} RIL_LastCallFailCauseInfo; - -/* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */ -typedef enum { - PDP_FAIL_NONE = 0, /* No error, connection ok */ - - /* an integer cause code defined in TS 24.008 - section 6.1.3.1.3 or TS 24.301 Release 8+ Annex B. - If the implementation does not have access to the exact cause codes, - then it should return one of the following values, - as the UI layer needs to distinguish these - cases for error notification and potential retries. */ - PDP_FAIL_OPERATOR_BARRED = 0x08, /* no retry */ - PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A, - PDP_FAIL_MISSING_UKNOWN_APN = 0x1B, /* no retry */ - PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C, /* no retry */ - PDP_FAIL_USER_AUTHENTICATION = 0x1D, /* no retry */ - PDP_FAIL_ACTIVATION_REJECT_GGSN = 0x1E, /* no retry */ - PDP_FAIL_ACTIVATION_REJECT_UNSPECIFIED = 0x1F, - PDP_FAIL_SERVICE_OPTION_NOT_SUPPORTED = 0x20, /* no retry */ - PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */ - PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22, - PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */ - PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio, - based on framework config */ - PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */ - PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */ - PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34, - PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */ - - /* Not mentioned in the specification */ - PDP_FAIL_VOICE_REGISTRATION_FAIL = -1, - PDP_FAIL_DATA_REGISTRATION_FAIL = -2, - - /* reasons for data call drop - network/modem disconnect */ - PDP_FAIL_SIGNAL_LOST = -3, - PDP_FAIL_PREF_RADIO_TECH_CHANGED = -4,/* preferred technology has changed, should retry - with parameters appropriate for new technology */ - PDP_FAIL_RADIO_POWER_OFF = -5, /* data call was disconnected because radio was resetting, - powered off - no retry */ - PDP_FAIL_TETHERED_CALL_ACTIVE = -6, /* data call was disconnected by modem because tethered - mode was up on same APN/data profile - no retry until - tethered call is off */ - - PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently */ -} RIL_DataCallFailCause; - -/* See RIL_REQUEST_SETUP_DATA_CALL */ -typedef enum { - RIL_DATA_PROFILE_DEFAULT = 0, - RIL_DATA_PROFILE_TETHERED = 1, - RIL_DATA_PROFILE_IMS = 2, - RIL_DATA_PROFILE_FOTA = 3, - RIL_DATA_PROFILE_CBS = 4, - RIL_DATA_PROFILE_OEM_BASE = 1000, /* Start of OEM-specific profiles */ - RIL_DATA_PROFILE_INVALID = 0xFFFFFFFF -} RIL_DataProfile; - -/* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */ -typedef struct { - int notificationType; /* - * 0 = MO intermediate result code - * 1 = MT unsolicited result code - */ - int code; /* See 27.007 7.17 - "code1" for MO - "code2" for MT. */ - int index; /* CUG index. See 27.007 7.17. */ - int type; /* "type" from 27.007 7.17 (MT only). */ - char * number; /* "number" from 27.007 7.17 - (MT only, may be NULL). */ -} RIL_SuppSvcNotification; - -#define RIL_CARD_MAX_APPS 8 - -typedef enum { - RIL_CARDSTATE_ABSENT = 0, - RIL_CARDSTATE_PRESENT = 1, - RIL_CARDSTATE_ERROR = 2 -} RIL_CardState; - -typedef enum { - RIL_PERSOSUBSTATE_UNKNOWN = 0, /* initial state */ - RIL_PERSOSUBSTATE_IN_PROGRESS = 1, /* in between each lock transition */ - RIL_PERSOSUBSTATE_READY = 2, /* when either SIM or RUIM Perso is finished - since each app can only have 1 active perso - involved */ - RIL_PERSOSUBSTATE_SIM_NETWORK = 3, - RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET = 4, - RIL_PERSOSUBSTATE_SIM_CORPORATE = 5, - RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER = 6, - RIL_PERSOSUBSTATE_SIM_SIM = 7, - RIL_PERSOSUBSTATE_SIM_NETWORK_PUK = 8, /* The corresponding perso lock is blocked */ - RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET_PUK = 9, - RIL_PERSOSUBSTATE_SIM_CORPORATE_PUK = 10, - RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER_PUK = 11, - RIL_PERSOSUBSTATE_SIM_SIM_PUK = 12, - RIL_PERSOSUBSTATE_RUIM_NETWORK1 = 13, - RIL_PERSOSUBSTATE_RUIM_NETWORK2 = 14, - RIL_PERSOSUBSTATE_RUIM_HRPD = 15, - RIL_PERSOSUBSTATE_RUIM_CORPORATE = 16, - RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER = 17, - RIL_PERSOSUBSTATE_RUIM_RUIM = 18, - RIL_PERSOSUBSTATE_RUIM_NETWORK1_PUK = 19, /* The corresponding perso lock is blocked */ - RIL_PERSOSUBSTATE_RUIM_NETWORK2_PUK = 20, - RIL_PERSOSUBSTATE_RUIM_HRPD_PUK = 21, - RIL_PERSOSUBSTATE_RUIM_CORPORATE_PUK = 22, - RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER_PUK = 23, - RIL_PERSOSUBSTATE_RUIM_RUIM_PUK = 24 -} RIL_PersoSubstate; - -typedef enum { - RIL_APPSTATE_UNKNOWN = 0, - RIL_APPSTATE_DETECTED = 1, - RIL_APPSTATE_PIN = 2, /* If PIN1 or UPin is required */ - RIL_APPSTATE_PUK = 3, /* If PUK1 or Puk for UPin is required */ - RIL_APPSTATE_SUBSCRIPTION_PERSO = 4, /* perso_substate should be look at - when app_state is assigned to this value */ - RIL_APPSTATE_READY = 5 -} RIL_AppState; - -typedef enum { - RIL_PINSTATE_UNKNOWN = 0, - RIL_PINSTATE_ENABLED_NOT_VERIFIED = 1, - RIL_PINSTATE_ENABLED_VERIFIED = 2, - RIL_PINSTATE_DISABLED = 3, - RIL_PINSTATE_ENABLED_BLOCKED = 4, - RIL_PINSTATE_ENABLED_PERM_BLOCKED = 5 -} RIL_PinState; - -typedef enum { - RIL_APPTYPE_UNKNOWN = 0, - RIL_APPTYPE_SIM = 1, - RIL_APPTYPE_USIM = 2, - RIL_APPTYPE_RUIM = 3, - RIL_APPTYPE_CSIM = 4, - RIL_APPTYPE_ISIM = 5 -} RIL_AppType; - -typedef struct -{ - RIL_AppType app_type; - RIL_AppState app_state; - RIL_PersoSubstate perso_substate; /* applicable only if app_state == - RIL_APPSTATE_SUBSCRIPTION_PERSO */ - char *aid_ptr; /* null terminated string, e.g., from 0xA0, 0x00 -> 0x41, - 0x30, 0x30, 0x30 */ - char *app_label_ptr; /* null terminated string */ - int pin1_replaced; /* applicable to USIM, CSIM & ISIM */ - RIL_PinState pin1; - RIL_PinState pin2; - int foo1; /* Samsung */ - int foo2; /* Samsung */ - int foo3; /* Samsung */ - int foo4; /* Samsung */ - int foo5; /* Samsung */ -} RIL_AppStatus; - -/* Deprecated, use RIL_CardStatus_v6 */ -typedef struct -{ - RIL_CardState card_state; - RIL_PinState universal_pin_state; /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */ - int gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ - int cdma_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ - int num_applications; /* value <= RIL_CARD_MAX_APPS */ - RIL_AppStatus applications[RIL_CARD_MAX_APPS]; -} RIL_CardStatus_v5; - -typedef struct -{ - RIL_CardState card_state; - RIL_PinState universal_pin_state; /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */ - int gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ - int cdma_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ - int ims_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ - int num_applications; /* value <= RIL_CARD_MAX_APPS */ - RIL_AppStatus applications[RIL_CARD_MAX_APPS]; -} RIL_CardStatus_v6; - -/** The result of a SIM refresh, returned in data[0] of RIL_UNSOL_SIM_REFRESH - * or as part of RIL_SimRefreshResponse_v7 - */ -typedef enum { - /* A file on SIM has been updated. data[1] contains the EFID. */ - SIM_FILE_UPDATE = 0, - /* SIM initialized. All files should be re-read. */ - SIM_INIT = 1, - /* SIM reset. SIM power required, SIM may be locked and all files should be re-read. */ - SIM_RESET = 2 -} RIL_SimRefreshResult; - -typedef struct { - RIL_SimRefreshResult result; - int ef_id; /* is the EFID of the updated file if the result is */ - /* SIM_FILE_UPDATE or 0 for any other result. */ - char * aid; /* is AID(application ID) of the card application */ - /* See ETSI 102.221 8.1 and 101.220 4 */ - /* For SIM_FILE_UPDATE result it can be set to AID of */ - /* application in which updated EF resides or it can be */ - /* NULL if EF is outside of an application. */ - /* For SIM_INIT result this field is set to AID of */ - /* application that caused REFRESH */ - /* For SIM_RESET result it is NULL. */ -} RIL_SimRefreshResponse_v7; - -/* Deprecated, use RIL_CDMA_CallWaiting_v6 */ -typedef struct { - char * number; /* Remote party number */ - int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */ - char * name; /* Remote party name */ - RIL_CDMA_SignalInfoRecord signalInfoRecord; -} RIL_CDMA_CallWaiting_v5; - -typedef struct { - char * number; /* Remote party number */ - int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */ - char * name; /* Remote party name */ - RIL_CDMA_SignalInfoRecord signalInfoRecord; - /* Number type/Number plan required to support International Call Waiting */ - int number_type; /* 0=Unknown, 1=International, 2=National, - 3=Network specific, 4=subscriber */ - int number_plan; /* 0=Unknown, 1=ISDN, 3=Data, 4=Telex, 8=Nat'l, 9=Private */ -} RIL_CDMA_CallWaiting_v6; - -/** - * Which types of Cell Broadcast Message (CBM) are to be received by the ME - * - * uFromServiceID - uToServiceID defines a range of CBM message identifiers - * whose value is 0x0000 - 0xFFFF as defined in TS 23.041 9.4.1.2.2 for GMS - * and 9.4.4.2.2 for UMTS. All other values can be treated as empty - * CBM message ID. - * - * uFromCodeScheme - uToCodeScheme defines a range of CBM data coding schemes - * whose value is 0x00 - 0xFF as defined in TS 23.041 9.4.1.2.3 for GMS - * and 9.4.4.2.3 for UMTS. - * All other values can be treated as empty CBM data coding scheme. - * - * selected 0 means message types specified in - * and are not accepted, while 1 means accepted. - * - * Used by RIL_REQUEST_GSM_GET_BROADCAST_CONFIG and - * RIL_REQUEST_GSM_SET_BROADCAST_CONFIG. - */ -typedef struct { - int fromServiceId; - int toServiceId; - int fromCodeScheme; - int toCodeScheme; - unsigned char selected; -} RIL_GSM_BroadcastSmsConfigInfo; - -/* No restriction at all including voice/SMS/USSD/SS/AV64 and packet data. */ -#define RIL_RESTRICTED_STATE_NONE 0x00 -/* Block emergency call due to restriction. But allow all normal voice/SMS/USSD/SS/AV64. */ -#define RIL_RESTRICTED_STATE_CS_EMERGENCY 0x01 -/* Block all normal voice/SMS/USSD/SS/AV64 due to restriction. Only Emergency call allowed. */ -#define RIL_RESTRICTED_STATE_CS_NORMAL 0x02 -/* Block all voice/SMS/USSD/SS/AV64 including emergency call due to restriction.*/ -#define RIL_RESTRICTED_STATE_CS_ALL 0x04 -/* Block packet data access due to restriction. */ -#define RIL_RESTRICTED_STATE_PS_ALL 0x10 - -/* The status for an OTASP/OTAPA session */ -typedef enum { - CDMA_OTA_PROVISION_STATUS_SPL_UNLOCKED, - CDMA_OTA_PROVISION_STATUS_SPC_RETRIES_EXCEEDED, - CDMA_OTA_PROVISION_STATUS_A_KEY_EXCHANGED, - CDMA_OTA_PROVISION_STATUS_SSD_UPDATED, - CDMA_OTA_PROVISION_STATUS_NAM_DOWNLOADED, - CDMA_OTA_PROVISION_STATUS_MDN_DOWNLOADED, - CDMA_OTA_PROVISION_STATUS_IMSI_DOWNLOADED, - CDMA_OTA_PROVISION_STATUS_PRL_DOWNLOADED, - CDMA_OTA_PROVISION_STATUS_COMMITTED, - CDMA_OTA_PROVISION_STATUS_OTAPA_STARTED, - CDMA_OTA_PROVISION_STATUS_OTAPA_STOPPED, - CDMA_OTA_PROVISION_STATUS_OTAPA_ABORTED -} RIL_CDMA_OTA_ProvisionStatus; - -typedef struct { - int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ - int bitErrorRate; /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */ -} RIL_GW_SignalStrength; - -typedef struct { - int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ - int bitErrorRate; /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */ -} RIL_SignalStrengthWcdma; - -typedef struct { - int dbm; /* Valid values are positive integers. This value is the actual RSSI value - * multiplied by -1. Example: If the actual RSSI is -75, then this response - * value will be 75. - */ - int ecio; /* Valid values are positive integers. This value is the actual Ec/Io multiplied - * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value - * will be 125. - */ -} RIL_CDMA_SignalStrength; - - -typedef struct { - int dbm; /* Valid values are positive integers. This value is the actual RSSI value - * multiplied by -1. Example: If the actual RSSI is -75, then this response - * value will be 75. - */ - int ecio; /* Valid values are positive integers. This value is the actual Ec/Io multiplied - * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value - * will be 125. - */ - int signalNoiseRatio; /* Valid values are 0-8. 8 is the highest signal to noise ratio. */ -} RIL_EVDO_SignalStrength; - -typedef struct { - int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ - int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1. - * Range: 44 to 140 dBm - * INT_MAX: 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.133 9.1.4 */ - int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1. - * Range: 20 to 3 dB. - * INT_MAX: 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.133 9.1.7 */ - int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units. - * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB). - * INT_MAX : 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.101 8.1.1 */ - int cqi; /* The current Channel Quality Indicator. - * Range: 0 to 15. - * INT_MAX : 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */ -} RIL_LTE_SignalStrength; - -typedef struct { - int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ - int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1. - * Range: 44 to 140 dBm - * INT_MAX: 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.133 9.1.4 */ - int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1. - * Range: 20 to 3 dB. - * INT_MAX: 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.133 9.1.7 */ - int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units. - * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB). - * INT_MAX : 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.101 8.1.1 */ - int cqi; /* The current Channel Quality Indicator. - * Range: 0 to 15. - * INT_MAX : 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */ - int timingAdvance; /* timing advance in micro seconds for a one way trip from cell to device. - * Approximate distance can be calculated using 300m/us * timingAdvance. - * Range: 0 to 0x7FFFFFFE - * INT_MAX : 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP 36.321 section 6.1.3.5 - * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */ -} RIL_LTE_SignalStrength_v8; - -typedef struct { - int rscp; /* The Received Signal Code Power in dBm multipled by -1. - * Range : 25 to 120 - * INT_MAX: 0x7FFFFFFF denotes invalid value. - * Reference: 3GPP TS 25.123, section 9.1.1.1 */ -} RIL_TD_SCDMA_SignalStrength; - -/* Deprecated, use RIL_SignalStrength_v6 */ -typedef struct { - RIL_GW_SignalStrength GW_SignalStrength; - RIL_CDMA_SignalStrength CDMA_SignalStrength; - RIL_EVDO_SignalStrength EVDO_SignalStrength; -} RIL_SignalStrength_v5; - -typedef struct { - RIL_GW_SignalStrength GW_SignalStrength; - RIL_CDMA_SignalStrength CDMA_SignalStrength; - RIL_EVDO_SignalStrength EVDO_SignalStrength; - RIL_LTE_SignalStrength LTE_SignalStrength; -} RIL_SignalStrength_v6; - -typedef struct { - RIL_GW_SignalStrength GW_SignalStrength; - RIL_CDMA_SignalStrength CDMA_SignalStrength; - RIL_EVDO_SignalStrength EVDO_SignalStrength; - RIL_LTE_SignalStrength_v8 LTE_SignalStrength; -} RIL_SignalStrength_v8; - -typedef struct { - RIL_GW_SignalStrength GW_SignalStrength; - RIL_CDMA_SignalStrength CDMA_SignalStrength; - RIL_EVDO_SignalStrength EVDO_SignalStrength; - RIL_LTE_SignalStrength_v8 LTE_SignalStrength; - RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength; -} RIL_SignalStrength_v10; - -/** RIL_CellIdentityGsm */ -typedef struct { - int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ - int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ - int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ - int cid; /* 16-bit GSM Cell Identity described in TS 27.007, 0..65535, INT_MAX if unknown */ -} RIL_CellIdentityGsm; - -/** RIL_CellIdentityWcdma */ -typedef struct { - int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ - int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ - int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ - int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */ - int psc; /* 9-bit UMTS Primary Scrambling Code described in TS 25.331, 0..511, INT_MAX if unknown */ -} RIL_CellIdentityWcdma; - -/** RIL_CellIdentityCdma */ -typedef struct { - int networkId; /* Network Id 0..65535, INT_MAX if unknown */ - int systemId; /* CDMA System Id 0..32767, INT_MAX if unknown */ - int basestationId; /* Base Station Id 0..65535, INT_MAX if unknown */ - int longitude; /* Longitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0. - * It is represented in units of 0.25 seconds and ranges from -2592000 - * to 2592000, both values inclusive (corresponding to a range of -180 - * to +180 degrees). INT_MAX if unknown */ - - int latitude; /* Latitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0. - * It is represented in units of 0.25 seconds and ranges from -1296000 - * to 1296000, both values inclusive (corresponding to a range of -90 - * to +90 degrees). INT_MAX if unknown */ -} RIL_CellIdentityCdma; - -/** RIL_CellIdentityLte */ -typedef struct { - int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ - int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ - int ci; /* 28-bit Cell Identity described in TS ???, INT_MAX if unknown */ - int pci; /* physical cell id 0..503, INT_MAX if unknown */ - int tac; /* 16-bit tracking area code, INT_MAX if unknown */ -} RIL_CellIdentityLte; - -/** RIL_CellIdentityTdscdma */ -typedef struct { - int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ - int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ - int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ - int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */ - int cpid; /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */ -} RIL_CellIdentityTdscdma; - -/** RIL_CellInfoGsm */ -typedef struct { - RIL_CellIdentityGsm cellIdentityGsm; - RIL_GW_SignalStrength signalStrengthGsm; -} RIL_CellInfoGsm; - -/** RIL_CellInfoWcdma */ -typedef struct { - RIL_CellIdentityWcdma cellIdentityWcdma; - RIL_SignalStrengthWcdma signalStrengthWcdma; -} RIL_CellInfoWcdma; - -/** RIL_CellInfoCdma */ -typedef struct { - RIL_CellIdentityCdma cellIdentityCdma; - RIL_CDMA_SignalStrength signalStrengthCdma; - RIL_EVDO_SignalStrength signalStrengthEvdo; -} RIL_CellInfoCdma; - -/** RIL_CellInfoLte */ -typedef struct { - RIL_CellIdentityLte cellIdentityLte; - RIL_LTE_SignalStrength_v8 signalStrengthLte; -} RIL_CellInfoLte; - -/** RIL_CellInfoTdscdma */ -typedef struct { - RIL_CellIdentityTdscdma cellIdentityTdscdma; - RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma; -} RIL_CellInfoTdscdma; - -// Must be the same as CellInfo.TYPE_XXX -typedef enum { - RIL_CELL_INFO_TYPE_GSM = 1, - RIL_CELL_INFO_TYPE_CDMA = 2, - RIL_CELL_INFO_TYPE_LTE = 3, - RIL_CELL_INFO_TYPE_WCDMA = 4, - RIL_CELL_INFO_TYPE_TD_SCDMA = 5 -} RIL_CellInfoType; - -// Must be the same as CellInfo.TIMESTAMP_TYPE_XXX -typedef enum { - RIL_TIMESTAMP_TYPE_UNKNOWN = 0, - RIL_TIMESTAMP_TYPE_ANTENNA = 1, - RIL_TIMESTAMP_TYPE_MODEM = 2, - RIL_TIMESTAMP_TYPE_OEM_RIL = 3, - RIL_TIMESTAMP_TYPE_JAVA_RIL = 4, -} RIL_TimeStampType; - -typedef struct { - RIL_CellInfoType cellInfoType; /* cell type for selecting from union CellInfo */ - int registered; /* !0 if this cell is registered 0 if not registered */ - RIL_TimeStampType timeStampType; /* type of time stamp represented by timeStamp */ - uint64_t timeStamp; /* Time in nanos as returned by ril_nano_time */ - union { - RIL_CellInfoGsm gsm; - RIL_CellInfoCdma cdma; - RIL_CellInfoLte lte; - RIL_CellInfoWcdma wcdma; - RIL_CellInfoTdscdma tdscdma; - } CellInfo; -} RIL_CellInfo; - -/* Names of the CDMA info records (C.S0005 section 3.7.5) */ -typedef enum { - RIL_CDMA_DISPLAY_INFO_REC, - RIL_CDMA_CALLED_PARTY_NUMBER_INFO_REC, - RIL_CDMA_CALLING_PARTY_NUMBER_INFO_REC, - RIL_CDMA_CONNECTED_NUMBER_INFO_REC, - RIL_CDMA_SIGNAL_INFO_REC, - RIL_CDMA_REDIRECTING_NUMBER_INFO_REC, - RIL_CDMA_LINE_CONTROL_INFO_REC, - RIL_CDMA_EXTENDED_DISPLAY_INFO_REC, - RIL_CDMA_T53_CLIR_INFO_REC, - RIL_CDMA_T53_RELEASE_INFO_REC, - RIL_CDMA_T53_AUDIO_CONTROL_INFO_REC -} RIL_CDMA_InfoRecName; - -/* Display Info Rec as defined in C.S0005 section 3.7.5.1 - Extended Display Info Rec as defined in C.S0005 section 3.7.5.16 - Note: the Extended Display info rec contains multiple records of the - form: display_tag, display_len, and display_len occurrences of the - chari field if the display_tag is not 10000000 or 10000001. - To save space, the records are stored consecutively in a byte buffer. - The display_tag, display_len and chari fields are all 1 byte. -*/ - -typedef struct { - char alpha_len; - char alpha_buf[CDMA_ALPHA_INFO_BUFFER_LENGTH]; -} RIL_CDMA_DisplayInfoRecord; - -/* Called Party Number Info Rec as defined in C.S0005 section 3.7.5.2 - Calling Party Number Info Rec as defined in C.S0005 section 3.7.5.3 - Connected Number Info Rec as defined in C.S0005 section 3.7.5.4 -*/ - -typedef struct { - char len; - char buf[CDMA_NUMBER_INFO_BUFFER_LENGTH]; - char number_type; - char number_plan; - char pi; - char si; -} RIL_CDMA_NumberInfoRecord; - -/* Redirecting Number Information Record as defined in C.S0005 section 3.7.5.11 */ -typedef enum { - RIL_REDIRECTING_REASON_UNKNOWN = 0, - RIL_REDIRECTING_REASON_CALL_FORWARDING_BUSY = 1, - RIL_REDIRECTING_REASON_CALL_FORWARDING_NO_REPLY = 2, - RIL_REDIRECTING_REASON_CALLED_DTE_OUT_OF_ORDER = 9, - RIL_REDIRECTING_REASON_CALL_FORWARDING_BY_THE_CALLED_DTE = 10, - RIL_REDIRECTING_REASON_CALL_FORWARDING_UNCONDITIONAL = 15, - RIL_REDIRECTING_REASON_RESERVED -} RIL_CDMA_RedirectingReason; - -typedef struct { - RIL_CDMA_NumberInfoRecord redirectingNumber; - /* redirectingReason is set to RIL_REDIRECTING_REASON_UNKNOWN if not included */ - RIL_CDMA_RedirectingReason redirectingReason; -} RIL_CDMA_RedirectingNumberInfoRecord; - -/* Line Control Information Record as defined in C.S0005 section 3.7.5.15 */ -typedef struct { - char lineCtrlPolarityIncluded; - char lineCtrlToggle; - char lineCtrlReverse; - char lineCtrlPowerDenial; -} RIL_CDMA_LineControlInfoRecord; - -/* T53 CLIR Information Record */ -typedef struct { - char cause; -} RIL_CDMA_T53_CLIRInfoRecord; - -/* T53 Audio Control Information Record */ -typedef struct { - char upLink; - char downLink; -} RIL_CDMA_T53_AudioControlInfoRecord; - -typedef struct { - - RIL_CDMA_InfoRecName name; - - union { - /* Display and Extended Display Info Rec */ - RIL_CDMA_DisplayInfoRecord display; - - /* Called Party Number, Calling Party Number, Connected Number Info Rec */ - RIL_CDMA_NumberInfoRecord number; - - /* Signal Info Rec */ - RIL_CDMA_SignalInfoRecord signal; - - /* Redirecting Number Info Rec */ - RIL_CDMA_RedirectingNumberInfoRecord redir; - - /* Line Control Info Rec */ - RIL_CDMA_LineControlInfoRecord lineCtrl; - - /* T53 CLIR Info Rec */ - RIL_CDMA_T53_CLIRInfoRecord clir; - - /* T53 Audio Control Info Rec */ - RIL_CDMA_T53_AudioControlInfoRecord audioCtrl; - } rec; -} RIL_CDMA_InformationRecord; - -#define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10 - -typedef struct { - char numberOfInfoRecs; - RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS]; -} RIL_CDMA_InformationRecords; - -/* See RIL_REQUEST_NV_READ_ITEM */ -typedef struct { - RIL_NV_Item itemID; -} RIL_NV_ReadItem; - -/* See RIL_REQUEST_NV_WRITE_ITEM */ -typedef struct { - RIL_NV_Item itemID; - char * value; -} RIL_NV_WriteItem; - -typedef enum { - HANDOVER_STARTED = 0, - HANDOVER_COMPLETED = 1, - HANDOVER_FAILED = 2, - HANDOVER_CANCELED = 3 -} RIL_SrvccState; - -/* hardware configuration reported to RILJ. */ -typedef enum { - RIL_HARDWARE_CONFIG_MODEM = 0, - RIL_HARDWARE_CONFIG_SIM = 1, -} RIL_HardwareConfig_Type; - -typedef enum { - RIL_HARDWARE_CONFIG_STATE_ENABLED = 0, - RIL_HARDWARE_CONFIG_STATE_STANDBY = 1, - RIL_HARDWARE_CONFIG_STATE_DISABLED = 2, -} RIL_HardwareConfig_State; - -typedef struct { - int rilModel; - uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */ - int maxVoice; - int maxData; - int maxStandby; -} RIL_HardwareConfig_Modem; - -typedef struct { - char modemUuid[MAX_UUID_LENGTH]; -} RIL_HardwareConfig_Sim; - -typedef struct { - RIL_HardwareConfig_Type type; - char uuid[MAX_UUID_LENGTH]; - RIL_HardwareConfig_State state; - union { - RIL_HardwareConfig_Modem modem; - RIL_HardwareConfig_Sim sim; - } cfg; -} RIL_HardwareConfig; - -typedef enum { - SS_CFU, - SS_CF_BUSY, - SS_CF_NO_REPLY, - SS_CF_NOT_REACHABLE, - SS_CF_ALL, - SS_CF_ALL_CONDITIONAL, - SS_CLIP, - SS_CLIR, - SS_COLP, - SS_COLR, - SS_WAIT, - SS_BAOC, - SS_BAOIC, - SS_BAOIC_EXC_HOME, - SS_BAIC, - SS_BAIC_ROAMING, - SS_ALL_BARRING, - SS_OUTGOING_BARRING, - SS_INCOMING_BARRING -} RIL_SsServiceType; - -typedef enum { - SS_ACTIVATION, - SS_DEACTIVATION, - SS_INTERROGATION, - SS_REGISTRATION, - SS_ERASURE -} RIL_SsRequestType; - -typedef enum { - SS_ALL_TELE_AND_BEARER_SERVICES, - SS_ALL_TELESEVICES, - SS_TELEPHONY, - SS_ALL_DATA_TELESERVICES, - SS_SMS_SERVICES, - SS_ALL_TELESERVICES_EXCEPT_SMS -} RIL_SsTeleserviceType; - -#define SS_INFO_MAX 4 -#define NUM_SERVICE_CLASSES 7 - -typedef struct { - int numValidIndexes; /* This gives the number of valid values in cfInfo. - For example if voice is forwarded to one number and data - is forwarded to a different one then numValidIndexes will be - 2 indicating total number of valid values in cfInfo. - Similarly if all the services are forwarded to the same - number then the value of numValidIndexes will be 1. */ - - RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data - for SS request to query call - forward status. see - RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */ -} RIL_CfData; - -typedef struct { - RIL_SsServiceType serviceType; - RIL_SsRequestType requestType; - RIL_SsTeleserviceType teleserviceType; - int serviceClass; - RIL_Errno result; - - union { - int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET - RIL requests. E.g. RIL_REQUSET_GET_CLIR returns - two ints, so first two values of ssInfo[] will be - used for response if serviceType is SS_CLIR and - requestType is SS_INTERROGATION */ - - RIL_CfData cfData; - }; -} RIL_StkCcUnsolSsResponse; - -/** - * Data connection power state - */ -typedef enum { - RIL_DC_POWER_STATE_LOW = 1, // Low power state - RIL_DC_POWER_STATE_MEDIUM = 2, // Medium power state - RIL_DC_POWER_STATE_HIGH = 3, // High power state - RIL_DC_POWER_STATE_UNKNOWN = INT32_MAX // Unknown state -} RIL_DcPowerStates; - -/** - * Data connection real time info - */ -typedef struct { - uint64_t time; // Time in nanos as returned by ril_nano_time - RIL_DcPowerStates powerState; // Current power state -} RIL_DcRtInfo; - -/** - * Data profile to modem - */ -typedef struct { - /* id of the data profile */ - int profileId; - /* the APN to connect to */ - char* apn; - /** one of the PDP_type values in TS 27.007 section 10.1.1. - * For example, "IP", "IPV6", "IPV4V6", or "PPP". - */ - char* protocol; - /** authentication protocol used for this PDP context - * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3) - */ - int authType; - /* the username for APN, or NULL */ - char* user; - /* the password for APN, or NULL */ - char* password; - /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */ - int type; - /* the period in seconds to limit the maximum connections */ - int maxConnsTime; - /* the maximum connections during maxConnsTime */ - int maxConns; - /** the required wait time in seconds after a successful UE initiated - * disconnect of a given PDN connection before the device can send - * a new PDN connection request for that given PDN - */ - int waitTime; - /* true to enable the profile, 0 to disable, 1 to enable */ - int enabled; -} RIL_DataProfileInfo; - -/* Tx Power Levels */ -#define RIL_NUM_TX_POWER_LEVELS 5 - -typedef struct { - - /* period (in ms) when modem is power collapsed */ - uint32_t sleep_mode_time_ms; - - /* period (in ms) when modem is awake and in idle mode*/ - uint32_t idle_mode_time_ms; - - /* period (in ms) for which Tx is active */ - uint32_t tx_mode_time_ms[RIL_NUM_TX_POWER_LEVELS]; - - /* period (in ms) for which Rx is active */ - uint32_t rx_mode_time_ms; -} RIL_ActivityStatsInfo; - -/** - * RIL_REQUEST_GET_SIM_STATUS - * - * Requests status of the SIM interface and the SIM card - * - * "data" is NULL - * - * "response" is const RIL_CardStatus_v6 * - * - * Valid errors: - * Must never fail - */ -#define RIL_REQUEST_GET_SIM_STATUS 1 - -/** - * RIL_REQUEST_ENTER_SIM_PIN - * - * Supplies SIM PIN. Only called if RIL_CardStatus has RIL_APPSTATE_PIN state - * - * "data" is const char ** - * ((const char **)data)[0] is PIN value - * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - */ - -#define RIL_REQUEST_ENTER_SIM_PIN 2 - -/** - * RIL_REQUEST_ENTER_SIM_PUK - * - * Supplies SIM PUK and new PIN. - * - * "data" is const char ** - * ((const char **)data)[0] is PUK value - * ((const char **)data)[1] is new PIN value - * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - * (PUK is invalid) - */ - -#define RIL_REQUEST_ENTER_SIM_PUK 3 - -/** - * RIL_REQUEST_ENTER_SIM_PIN2 - * - * Supplies SIM PIN2. Only called following operation where SIM_PIN2 was - * returned as a a failure from a previous operation. - * - * "data" is const char ** - * ((const char **)data)[0] is PIN2 value - * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - */ - -#define RIL_REQUEST_ENTER_SIM_PIN2 4 - -/** - * RIL_REQUEST_ENTER_SIM_PUK2 - * - * Supplies SIM PUK2 and new PIN2. - * - * "data" is const char ** - * ((const char **)data)[0] is PUK2 value - * ((const char **)data)[1] is new PIN2 value - * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - * (PUK2 is invalid) - */ - -#define RIL_REQUEST_ENTER_SIM_PUK2 5 - -/** - * RIL_REQUEST_CHANGE_SIM_PIN - * - * Supplies old SIM PIN and new PIN. - * - * "data" is const char ** - * ((const char **)data)[0] is old PIN value - * ((const char **)data)[1] is new PIN value - * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - * (old PIN is invalid) - * - */ - -#define RIL_REQUEST_CHANGE_SIM_PIN 6 - - -/** - * RIL_REQUEST_CHANGE_SIM_PIN2 - * - * Supplies old SIM PIN2 and new PIN2. - * - * "data" is const char ** - * ((const char **)data)[0] is old PIN2 value - * ((const char **)data)[1] is new PIN2 value - * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - * (old PIN2 is invalid) - * - */ - -#define RIL_REQUEST_CHANGE_SIM_PIN2 7 - -/** - * RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION - * - * Requests that network personlization be deactivated - * - * "data" is const char ** - * ((const char **)(data))[0]] is network depersonlization code - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * PASSWORD_INCORRECT - * (code is invalid) - */ - -#define RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION 8 - -/** - * RIL_REQUEST_GET_CURRENT_CALLS - * - * Requests current call list - * - * "data" is NULL - * - * "response" must be a "const RIL_Call **" - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * (request will be made again in a few hundred msec) - */ - -#define RIL_REQUEST_GET_CURRENT_CALLS 9 - - -/** - * RIL_REQUEST_DIAL - * - * Initiate voice call - * - * "data" is const RIL_Dial * - * "response" is NULL - * - * This method is never used for supplementary service codes - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * DIAL_MODIFIED_TO_USSD - * DIAL_MODIFIED_TO_SS - * DIAL_MODIFIED_TO_DIAL - * GENERIC_FAILURE - */ -#define RIL_REQUEST_DIAL 10 - -/** - * RIL_REQUEST_GET_IMSI - * - * Get the SIM IMSI - * - * Only valid when radio state is "RADIO_STATE_ON" - * - * "data" is const char ** - * ((const char **)data)[0] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * "response" is a const char * containing the IMSI - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_GET_IMSI 11 - -/** - * RIL_REQUEST_HANGUP - * - * Hang up a specific line (like AT+CHLD=1x) - * - * After this HANGUP request returns, RIL should show the connection is NOT - * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query. - * - * "data" is an int * - * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_HANGUP 12 - -/** - * RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND - * - * Hang up waiting or held (like AT+CHLD=0) - * - * After this HANGUP request returns, RIL should show the connection is NOT - * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query. - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND 13 - -/** - * RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND - * - * Hang up waiting or held (like AT+CHLD=1) - * - * After this HANGUP request returns, RIL should show the connection is NOT - * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query. - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND 14 - -/** - * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE - * - * Switch waiting or holding call and active call (like AT+CHLD=2) - * - * State transitions should be is follows: - * - * If call 1 is waiting and call 2 is active, then if this re - * - * BEFORE AFTER - * Call 1 Call 2 Call 1 Call 2 - * ACTIVE HOLDING HOLDING ACTIVE - * ACTIVE WAITING HOLDING ACTIVE - * HOLDING WAITING HOLDING ACTIVE - * ACTIVE IDLE HOLDING IDLE - * IDLE IDLE IDLE IDLE - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE 15 -#define RIL_REQUEST_SWITCH_HOLDING_AND_ACTIVE 15 - -/** - * RIL_REQUEST_CONFERENCE - * - * Conference holding and active (like AT+CHLD=3) - - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ -#define RIL_REQUEST_CONFERENCE 16 - -/** - * RIL_REQUEST_UDUB - * - * Send UDUB (user determined used busy) to ringing or - * waiting call answer)(RIL_BasicRequest r); - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ -#define RIL_REQUEST_UDUB 17 - -/** - * RIL_REQUEST_LAST_CALL_FAIL_CAUSE - * - * Requests the failure cause code for the most recently terminated call - * - * "data" is NULL - * "response" is a "int *" - * ((int *)response)[0] is RIL_LastCallFailCause. GSM failure reasons are - * mapped to cause codes defined in TS 24.008 Annex H where possible. CDMA - * failure reasons are derived from the possible call failure scenarios - * described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard. - * - * The implementation should return CALL_FAIL_ERROR_UNSPECIFIED for blocked - * MO calls by restricted state (See RIL_UNSOL_RESTRICTED_STATE_CHANGED) - * - * If the implementation does not have access to the exact cause codes, - * then it should return one of the values listed in RIL_LastCallFailCause, - * as the UI layer needs to distinguish these cases for tone generation or - * error notification. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE - */ -#define RIL_REQUEST_LAST_CALL_FAIL_CAUSE 18 - -/** - * RIL_REQUEST_SIGNAL_STRENGTH - * - * Requests current signal strength and associated information - * - * Must succeed if radio is on. - * - * "data" is NULL - * - * "response" is a const RIL_SignalStrength * - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - */ -#define RIL_REQUEST_SIGNAL_STRENGTH 19 - -/** - * RIL_REQUEST_VOICE_REGISTRATION_STATE - * - * Request current registration state - * - * "data" is NULL - * "response" is a "char **" - * ((const char **)response)[0] is registration state 0-6, - * 0 - Not registered, MT is not currently searching - * a new operator to register - * 1 - Registered, home network - * 2 - Not registered, but MT is currently searching - * a new operator to register - * 3 - Registration denied - * 4 - Unknown - * 5 - Registered, roaming - * 10 - Same as 0, but indicates that emergency calls - * are enabled. - * 12 - Same as 2, but indicates that emergency calls - * are enabled. - * 13 - Same as 3, but indicates that emergency calls - * are enabled. - * 14 - Same as 4, but indicates that emergency calls - * are enabled. - * - * ((const char **)response)[1] is LAC if registered on a GSM/WCDMA system or - * NULL if not.Valid LAC are 0x0000 - 0xffff - * ((const char **)response)[2] is CID if registered on a * GSM/WCDMA or - * NULL if not. - * Valid CID are 0x00000000 - 0xffffffff - * In GSM, CID is Cell ID (see TS 27.007) - * in 16 bits - * In UMTS, CID is UMTS Cell Identity - * (see TS 25.331) in 28 bits - * ((const char **)response)[3] indicates the available voice radio technology, - * valid values as defined by RIL_RadioTechnology. - * ((const char **)response)[4] is Base Station ID if registered on a CDMA - * system or NULL if not. Base Station ID in - * decimal format - * ((const char **)response)[5] is Base Station latitude if registered on a - * CDMA system or NULL if not. Base Station - * latitude is a decimal number as specified in - * 3GPP2 C.S0005-A v6.0. It is represented in - * units of 0.25 seconds and ranges from -1296000 - * to 1296000, both values inclusive (corresponding - * to a range of -90 to +90 degrees). - * ((const char **)response)[6] is Base Station longitude if registered on a - * CDMA system or NULL if not. Base Station - * longitude is a decimal number as specified in - * 3GPP2 C.S0005-A v6.0. It is represented in - * units of 0.25 seconds and ranges from -2592000 - * to 2592000, both values inclusive (corresponding - * to a range of -180 to +180 degrees). - * ((const char **)response)[7] is concurrent services support indicator if - * registered on a CDMA system 0-1. - * 0 - Concurrent services not supported, - * 1 - Concurrent services supported - * ((const char **)response)[8] is System ID if registered on a CDMA system or - * NULL if not. Valid System ID are 0 - 32767 - * ((const char **)response)[9] is Network ID if registered on a CDMA system or - * NULL if not. Valid System ID are 0 - 65535 - * ((const char **)response)[10] is the TSB-58 Roaming Indicator if registered - * on a CDMA or EVDO system or NULL if not. Valid values - * are 0-255. - * ((const char **)response)[11] indicates whether the current system is in the - * PRL if registered on a CDMA or EVDO system or NULL if - * not. 0=not in the PRL, 1=in the PRL - * ((const char **)response)[12] is the default Roaming Indicator from the PRL, - * if registered on a CDMA or EVDO system or NULL if not. - * Valid values are 0-255. - * ((const char **)response)[13] if registration state is 3 (Registration - * denied) this is an enumerated reason why - * registration was denied. See 3GPP TS 24.008, - * 10.5.3.6 and Annex G. - * 0 - General - * 1 - Authentication Failure - * 2 - IMSI unknown in HLR - * 3 - Illegal MS - * 4 - Illegal ME - * 5 - PLMN not allowed - * 6 - Location area not allowed - * 7 - Roaming not allowed - * 8 - No Suitable Cells in this Location Area - * 9 - Network failure - * 10 - Persistent location update reject - * 11 - PLMN not allowed - * 12 - Location area not allowed - * 13 - Roaming not allowed in this Location Area - * 15 - No Suitable Cells in this Location Area - * 17 - Network Failure - * 20 - MAC Failure - * 21 - Sync Failure - * 22 - Congestion - * 23 - GSM Authentication unacceptable - * 25 - Not Authorized for this CSG - * 32 - Service option not supported - * 33 - Requested service option not subscribed - * 34 - Service option temporarily out of order - * 38 - Call cannot be identified - * 48-63 - Retry upon entry into a new cell - * 95 - Semantically incorrect message - * 96 - Invalid mandatory information - * 97 - Message type non-existent or not implemented - * 98 - Message not compatible with protocol state - * 99 - Information element non-existent or not implemented - * 100 - Conditional IE error - * 101 - Message not compatible with protocol state - * 111 - Protocol error, unspecified - * ((const char **)response)[14] is the Primary Scrambling Code of the current - * cell as described in TS 25.331, in hexadecimal - * format, or NULL if unknown or not registered - * to a UMTS network. - * - * Please note that registration state 4 ("unknown") is treated - * as "out of service" in the Android telephony system - * - * Registration state 3 can be returned if Location Update Reject - * (with cause 17 - Network Failure) is received repeatedly from the network, - * to facilitate "managed roaming" - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_VOICE_REGISTRATION_STATE 20 - -/** - * RIL_REQUEST_DATA_REGISTRATION_STATE - * - * Request current DATA registration state - * - * "data" is NULL - * "response" is a "char **" - * ((const char **)response)[0] is registration state 0-5 from TS 27.007 10.1.20 AT+CGREG - * ((const char **)response)[1] is LAC if registered or NULL if not - * ((const char **)response)[2] is CID if registered or NULL if not - * ((const char **)response)[3] indicates the available data radio technology, - * valid values as defined by RIL_RadioTechnology. - * ((const char **)response)[4] if registration state is 3 (Registration - * denied) this is an enumerated reason why - * registration was denied. See 3GPP TS 24.008, - * Annex G.6 "Additonal cause codes for GMM". - * 7 == GPRS services not allowed - * 8 == GPRS services and non-GPRS services not allowed - * 9 == MS identity cannot be derived by the network - * 10 == Implicitly detached - * 14 == GPRS services not allowed in this PLMN - * 16 == MSC temporarily not reachable - * 40 == No PDP context activated - * ((const char **)response)[5] The maximum number of simultaneous Data Calls that can be - * established using RIL_REQUEST_SETUP_DATA_CALL. - * - * The values at offsets 6..10 are optional LTE location information in decimal. - * If a value is unknown that value may be NULL. If all values are NULL, - * none need to be present. - * ((const char **)response)[6] is TAC, a 16-bit Tracking Area Code. - * ((const char **)response)[7] is CID, a 0-503 Physical Cell Identifier. - * ((const char **)response)[8] is ECI, a 28-bit E-UTRAN Cell Identifier. - * ((const char **)response)[9] is CSGID, a 27-bit Closed Subscriber Group Identity. - * ((const char **)response)[10] is TADV, a 6-bit timing advance value. - * - * LAC and CID are in hexadecimal format. - * valid LAC are 0x0000 - 0xffff - * valid CID are 0x00000000 - 0x0fffffff - * - * Please note that registration state 4 ("unknown") is treated - * as "out of service" in the Android telephony system - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_DATA_REGISTRATION_STATE 21 - -/** - * RIL_REQUEST_OPERATOR - * - * Request current operator ONS or EONS - * - * "data" is NULL - * "response" is a "const char **" - * ((const char **)response)[0] is long alpha ONS or EONS - * or NULL if unregistered - * - * ((const char **)response)[1] is short alpha ONS or EONS - * or NULL if unregistered - * ((const char **)response)[2] is 5 or 6 digit numeric code (MCC + MNC) - * or NULL if unregistered - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_OPERATOR 22 - -/** - * RIL_REQUEST_RADIO_POWER - * - * Toggle radio on and off (for "airplane" mode) - * If the radio is is turned off/on the radio modem subsystem - * is expected return to an initialized state. For instance, - * any voice and data calls will be terminated and all associated - * lists emptied. - * - * "data" is int * - * ((int *)data)[0] is > 0 for "Radio On" - * ((int *)data)[0] is == 0 for "Radio Off" - * - * "response" is NULL - * - * Turn radio on if "on" > 0 - * Turn radio off if "on" == 0 - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_RADIO_POWER 23 - -/** - * RIL_REQUEST_DTMF - * - * Send a DTMF tone - * - * If the implementation is currently playing a tone requested via - * RIL_REQUEST_DTMF_START, that tone should be cancelled and the new tone - * should be played instead - * - * "data" is a char * containing a single character with one of 12 values: 0-9,*,# - * "response" is NULL - * - * FIXME should this block/mute microphone? - * How does this interact with local DTMF feedback? - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_DTMF_STOP, RIL_REQUEST_DTMF_START - * - */ -#define RIL_REQUEST_DTMF 24 - -/** - * RIL_REQUEST_SEND_SMS - * - * Send an SMS message - * - * "data" is const char ** - * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed - * by a length byte (as expected by TS 27.005) or NULL for default SMSC - * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string - * less the SMSC address - * TP-Layer-Length is be "strlen(((const char **)data)[1])/2" - * - * "response" is a const RIL_SMS_Response * - * - * Based on the return error, caller decides to resend if sending sms - * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) - * and GENERIC_FAILURE means no retry (i.e. error cause is 500) - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SMS_SEND_FAIL_RETRY - * FDN_CHECK_FAILURE - * GENERIC_FAILURE - * - * FIXME how do we specify TP-Message-Reference if we need to resend? - */ -#define RIL_REQUEST_SEND_SMS 25 - - -/** - * RIL_REQUEST_SEND_SMS_EXPECT_MORE - * - * Send an SMS message. Identical to RIL_REQUEST_SEND_SMS, - * except that more messages are expected to be sent soon. If possible, - * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command) - * - * "data" is const char ** - * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed - * by a length byte (as expected by TS 27.005) or NULL for default SMSC - * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string - * less the SMSC address - * TP-Layer-Length is be "strlen(((const char **)data)[1])/2" - * - * "response" is a const RIL_SMS_Response * - * - * Based on the return error, caller decides to resend if sending sms - * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) - * and GENERIC_FAILURE means no retry (i.e. error cause is 500) - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SMS_SEND_FAIL_RETRY - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_SEND_SMS_EXPECT_MORE 26 - - -/** - * RIL_REQUEST_SETUP_DATA_CALL - * - * Setup a packet data connection. If RIL_Data_Call_Response_v6.status - * return success it is added to the list of data calls and a - * RIL_UNSOL_DATA_CALL_LIST_CHANGED is sent. The call remains in the - * list until RIL_REQUEST_DEACTIVATE_DATA_CALL is issued or the - * radio is powered off/on. This list is returned by RIL_REQUEST_DATA_CALL_LIST - * and RIL_UNSOL_DATA_CALL_LIST_CHANGED. - * - * The RIL is expected to: - * - Create one data call context. - * - Create and configure a dedicated interface for the context - * - The interface must be point to point. - * - The interface is configured with one or more addresses and - * is capable of sending and receiving packets. The prefix length - * of the addresses must be /32 for IPv4 and /128 for IPv6. - * - Must NOT change the linux routing table. - * - Support up to RIL_REQUEST_DATA_REGISTRATION_STATE response[5] - * number of simultaneous data call contexts. - * - * "data" is a const char ** - * ((const char **)data)[0] Radio technology to use: 0-CDMA, 1-GSM/UMTS, 2... - * for values above 2 this is RIL_RadioTechnology + 2. - * ((const char **)data)[1] is a RIL_DataProfile (support is optional) - * ((const char **)data)[2] is the APN to connect to if radio technology is GSM/UMTS. This APN will - * override the one in the profile. NULL indicates no APN overrride. - * ((const char **)data)[3] is the username for APN, or NULL - * ((const char **)data)[4] is the password for APN, or NULL - * ((const char **)data)[5] is the PAP / CHAP auth type. Values: - * 0 => PAP and CHAP is never performed. - * 1 => PAP may be performed; CHAP is never performed. - * 2 => CHAP may be performed; PAP is never performed. - * 3 => PAP / CHAP may be performed - baseband dependent. - * ((const char **)data)[6] is the connection type to request must be one of the - * PDP_type values in TS 27.007 section 10.1.1. - * For example, "IP", "IPV6", "IPV4V6", or "PPP". - * ((const char **)data)[7] Optional connection property parameters, format to be defined. - * - * "response" is a RIL_Data_Call_Response_v11 - * - * FIXME may need way to configure QoS settings - * - * Valid errors: - * SUCCESS should be returned on both success and failure of setup with - * the RIL_Data_Call_Response_v6.status containing the actual status. - * For all other errors the RIL_Data_Call_Resonse_v6 is ignored. - * - * Other errors could include: - * RADIO_NOT_AVAILABLE, GENERIC_FAILURE, OP_NOT_ALLOWED_BEFORE_REG_TO_NW, - * OP_NOT_ALLOWED_DURING_VOICE_CALL and REQUEST_NOT_SUPPORTED. - * - * See also: RIL_REQUEST_DEACTIVATE_DATA_CALL - */ -#define RIL_REQUEST_SETUP_DATA_CALL 27 - - -/** - * RIL_REQUEST_SIM_IO - * - * Request SIM I/O operation. - * This is similar to the TS 27.007 "restricted SIM" operation - * where it assumes all of the EF selection will be done by the - * callee. - * - * "data" is a const RIL_SIM_IO_v6 * - * Please note that RIL_SIM_IO has a "PIN2" field which may be NULL, - * or may specify a PIN2 for operations that require a PIN2 (eg - * updating FDN records) - * - * "response" is a const RIL_SIM_IO_Response * - * - * Arguments and responses that are unused for certain - * values of "command" should be ignored or set to NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * SIM_PIN2 - * SIM_PUK2 - */ -#define RIL_REQUEST_SIM_IO 28 - -/** - * RIL_REQUEST_SEND_USSD - * - * Send a USSD message - * - * If a USSD session already exists, the message should be sent in the - * context of that session. Otherwise, a new session should be created. - * - * The network reply should be reported via RIL_UNSOL_ON_USSD - * - * Only one USSD session may exist at a time, and the session is assumed - * to exist until: - * a) The android system invokes RIL_REQUEST_CANCEL_USSD - * b) The implementation sends a RIL_UNSOL_ON_USSD with a type code - * of "0" (USSD-Notify/no further action) or "2" (session terminated) - * - * "data" is a const char * containing the USSD request in UTF-8 format - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * FDN_CHECK_FAILURE - * USSD_MODIFIED_TO_DIAL - * USSD_MODIFIED_TO_SS - * USSD_MODIFIED_TO_USSD - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD - */ - -#define RIL_REQUEST_SEND_USSD 29 - -/** - * RIL_REQUEST_CANCEL_USSD - * - * Cancel the current USSD session if one exists - * - * "data" is null - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_CANCEL_USSD 30 - -/** - * RIL_REQUEST_GET_CLIR - * - * Gets current CLIR status - * "data" is NULL - * "response" is int * - * ((int *)data)[0] is "n" parameter from TS 27.007 7.7 - * ((int *)data)[1] is "m" parameter from TS 27.007 7.7 - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_GET_CLIR 31 - -/** - * RIL_REQUEST_SET_CLIR - * - * "data" is int * - * ((int *)data)[0] is "n" parameter from TS 27.007 7.7 - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_CLIR 32 - -/** - * RIL_REQUEST_QUERY_CALL_FORWARD_STATUS - * - * "data" is const RIL_CallForwardInfo * - * - * "response" is const RIL_CallForwardInfo ** - * "response" points to an array of RIL_CallForwardInfo *'s, one for - * each distinct registered phone number. - * - * For example, if data is forwarded to +18005551212 and voice is forwarded - * to +18005559999, then two separate RIL_CallForwardInfo's should be returned - * - * If, however, both data and voice are forwarded to +18005551212, then - * a single RIL_CallForwardInfo can be returned with the service class - * set to "data + voice = 3") - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33 - - -/** - * RIL_REQUEST_SET_CALL_FORWARD - * - * Configure call forward rule - * - * "data" is const RIL_CallForwardInfo * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_CALL_FORWARD 34 - - -/** - * RIL_REQUEST_QUERY_CALL_WAITING - * - * Query current call waiting state - * - * "data" is const int * - * ((const int *)data)[0] is the TS 27.007 service class to query. - * "response" is a const int * - * ((const int *)response)[0] is 0 for "disabled" and 1 for "enabled" - * - * If ((const int *)response)[0] is = 1, then ((const int *)response)[1] - * must follow, with the TS 27.007 service class bit vector of services - * for which call waiting is enabled. - * - * For example, if ((const int *)response)[0] is 1 and - * ((const int *)response)[1] is 3, then call waiting is enabled for data - * and voice and disabled for everything else - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_QUERY_CALL_WAITING 35 - - -/** - * RIL_REQUEST_SET_CALL_WAITING - * - * Configure current call waiting state - * - * "data" is const int * - * ((const int *)data)[0] is 0 for "disabled" and 1 for "enabled" - * ((const int *)data)[1] is the TS 27.007 service class bit vector of - * services to modify - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_CALL_WAITING 36 - -/** - * RIL_REQUEST_SMS_ACKNOWLEDGE - * - * Acknowledge successful or failed receipt of SMS previously indicated - * via RIL_UNSOL_RESPONSE_NEW_SMS - * - * "data" is int * - * ((int *)data)[0] is 1 on successful receipt - * (basically, AT+CNMA=1 from TS 27.005 - * is 0 on failed receipt - * (basically, AT+CNMA=2 from TS 27.005) - * ((int *)data)[1] if data[0] is 0, this contains the failure cause as defined - * in TS 23.040, 9.2.3.22. Currently only 0xD3 (memory - * capacity exceeded) and 0xFF (unspecified error) are - * reported. - * - * "response" is NULL - * - * FIXME would like request that specified RP-ACK/RP-ERROR PDU - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SMS_ACKNOWLEDGE 37 - -/** - * RIL_REQUEST_GET_IMEI - DEPRECATED - * - * Get the device IMEI, including check digit - * - * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY - * Valid when RadioState is not RADIO_STATE_UNAVAILABLE - * - * "data" is NULL - * "response" is a const char * containing the IMEI - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_GET_IMEI 38 - -/** - * RIL_REQUEST_GET_IMEISV - DEPRECATED - * - * Get the device IMEISV, which should be two decimal digits - * - * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY - * Valid when RadioState is not RADIO_STATE_UNAVAILABLE - * - * "data" is NULL - * "response" is a const char * containing the IMEISV - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_GET_IMEISV 39 - - -/** - * RIL_REQUEST_ANSWER - * - * Answer incoming call - * - * Will not be called for WAITING calls. - * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE will be used in this case - * instead - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_ANSWER 40 - -/** - * RIL_REQUEST_DEACTIVATE_DATA_CALL - * - * Deactivate packet data connection and remove from the - * data call list if SUCCESS is returned. Any other return - * values should also try to remove the call from the list, - * but that may not be possible. In any event a - * RIL_REQUEST_RADIO_POWER off/on must clear the list. An - * RIL_UNSOL_DATA_CALL_LIST_CHANGED is not expected to be - * issued because of an RIL_REQUEST_DEACTIVATE_DATA_CALL. - * - * "data" is const char ** - * ((char**)data)[0] indicating CID - * ((char**)data)[1] indicating Disconnect Reason - * 0 => No specific reason specified - * 1 => Radio shutdown requested - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_SETUP_DATA_CALL - */ -#define RIL_REQUEST_DEACTIVATE_DATA_CALL 41 - -/** - * RIL_REQUEST_QUERY_FACILITY_LOCK - * - * Query the status of a facility lock state - * - * "data" is const char ** - * ((const char **)data)[0] is the facility string code from TS 27.007 7.4 - * (eg "AO" for BAOC, "SC" for SIM lock) - * ((const char **)data)[1] is the password, or "" if not required - * ((const char **)data)[2] is the TS 27.007 service class bit vector of - * services to query - * ((const char **)data)[3] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * This is only applicable in the case of Fixed Dialing Numbers - * (FDN) requests. - * - * "response" is an int * - * ((const int *)response) 0 is the TS 27.007 service class bit vector of - * services for which the specified barring facility - * is active. "0" means "disabled for all" - * - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_QUERY_FACILITY_LOCK 42 - -/** - * RIL_REQUEST_SET_FACILITY_LOCK - * - * Enable/disable one facility lock - * - * "data" is const char ** - * - * ((const char **)data)[0] = facility string code from TS 27.007 7.4 - * (eg "AO" for BAOC) - * ((const char **)data)[1] = "0" for "unlock" and "1" for "lock" - * ((const char **)data)[2] = password - * ((const char **)data)[3] = string representation of decimal TS 27.007 - * service class bit vector. Eg, the string - * "1" means "set this facility for voice services" - * ((const char **)data)[4] = AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. - * This is only applicable in the case of Fixed Dialing Numbers - * (FDN) requests. - * - * "response" is int * - * ((int *)response)[0] is the number of retries remaining, or -1 if unknown - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_SET_FACILITY_LOCK 43 - -/** - * RIL_REQUEST_CHANGE_BARRING_PASSWORD - * - * Change call barring facility password - * - * "data" is const char ** - * - * ((const char **)data)[0] = facility string code from TS 27.007 7.4 - * (eg "AO" for BAOC) - * ((const char **)data)[1] = old password - * ((const char **)data)[2] = new password - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CHANGE_BARRING_PASSWORD 44 - -/** - * RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE - * - * Query current network selectin mode - * - * "data" is NULL - * - * "response" is int * - * ((const int *)response)[0] is - * 0 for automatic selection - * 1 for manual selection - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE 45 - -/** - * RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC - * - * Specify that the network should be selected automatically - * - * "data" is NULL - * "response" is NULL - * - * This request must not respond until the new operator is selected - * and registered - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * ILLEGAL_SIM_OR_ME - * GENERIC_FAILURE - * - * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and - * no retries needed, such as illegal SIM or ME. - * Returns GENERIC_FAILURE for all other causes that might be - * fixed by retries. - * - */ -#define RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 46 - -/** - * RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL - * - * Manually select a specified network. - * - * "data" is const char * specifying MCCMNC of network to select (eg "310170") - * "response" is NULL - * - * This request must not respond until the new operator is selected - * and registered - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * ILLEGAL_SIM_OR_ME - * GENERIC_FAILURE - * - * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and - * no retries needed, such as illegal SIM or ME. - * Returns GENERIC_FAILURE for all other causes that might be - * fixed by retries. - * - */ -#define RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 47 - -/** - * RIL_REQUEST_QUERY_AVAILABLE_NETWORKS - * - * Scans for available networks - * - * "data" is NULL - * "response" is const char ** that should be an array of n*4 strings, where - * n is the number of available networks - * For each available network: - * - * ((const char **)response)[n+0] is long alpha ONS or EONS - * ((const char **)response)[n+1] is short alpha ONS or EONS - * ((const char **)response)[n+2] is 5 or 6 digit numeric code (MCC + MNC) - * ((const char **)response)[n+3] is a string value of the status: - * "unknown" - * "available" - * "current" - * "forbidden" - * - * This request must not respond until the new operator is selected - * and registered - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_QUERY_AVAILABLE_NETWORKS 48 - -/** - * RIL_REQUEST_DTMF_START - * - * Start playing a DTMF tone. Continue playing DTMF tone until - * RIL_REQUEST_DTMF_STOP is received - * - * If a RIL_REQUEST_DTMF_START is received while a tone is currently playing, - * it should cancel the previous tone and play the new one. - * - * "data" is a char * - * ((char *)data)[0] is a single character with one of 12 values: 0-9,*,# - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_STOP - */ -#define RIL_REQUEST_DTMF_START 49 - -/** - * RIL_REQUEST_DTMF_STOP - * - * Stop playing a currently playing DTMF tone. - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_START - */ -#define RIL_REQUEST_DTMF_STOP 50 - -/** - * RIL_REQUEST_BASEBAND_VERSION - * - * Return string value indicating baseband version, eg - * response from AT+CGMR - * - * "data" is NULL - * "response" is const char * containing version string for log reporting - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_BASEBAND_VERSION 51 - -/** - * RIL_REQUEST_SEPARATE_CONNECTION - * - * Separate a party from a multiparty call placing the multiparty call - * (less the specified party) on hold and leaving the specified party - * as the only other member of the current (active) call - * - * Like AT+CHLD=2x - * - * See TS 22.084 1.3.8.2 (iii) - * TS 22.030 6.5.5 "Entering "2X followed by send" - * TS 27.007 "AT+CHLD=2x" - * - * "data" is an int * - * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) "response" is NULL - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SEPARATE_CONNECTION 52 - - -/** - * RIL_REQUEST_SET_MUTE - * - * Turn on or off uplink (microphone) mute. - * - * Will only be sent while voice call is active. - * Will always be reset to "disable mute" when a new voice call is initiated - * - * "data" is an int * - * (int *)data)[0] is 1 for "enable mute" and 0 for "disable mute" - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_SET_MUTE 53 - -/** - * RIL_REQUEST_GET_MUTE - * - * Queries the current state of the uplink mute setting - * - * "data" is NULL - * "response" is an int * - * (int *)response)[0] is 1 for "mute enabled" and 0 for "mute disabled" - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * SS_MODIFIED_TO_DIAL - * SS_MODIFIED_TO_USSD - * SS_MODIFIED_TO_SS - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_GET_MUTE 54 - -/** - * RIL_REQUEST_QUERY_CLIP - * - * Queries the status of the CLIP supplementary service - * - * (for MMI code "*#30#") - * - * "data" is NULL - * "response" is an int * - * (int *)response)[0] is 1 for "CLIP provisioned" - * and 0 for "CLIP not provisioned" - * and 2 for "unknown, e.g. no network etc" - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ - -#define RIL_REQUEST_QUERY_CLIP 55 - -/** - * RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE - Deprecated use the status - * field in RIL_Data_Call_Response_v6. - * - * Requests the failure cause code for the most recently failed PDP - * context or CDMA data connection active - * replaces RIL_REQUEST_LAST_PDP_FAIL_CAUSE - * - * "data" is NULL - * - * "response" is a "int *" - * ((int *)response)[0] is an integer cause code defined in TS 24.008 - * section 6.1.3.1.3 or close approximation - * - * If the implementation does not have access to the exact cause codes, - * then it should return one of the values listed in - * RIL_DataCallFailCause, as the UI layer needs to distinguish these - * cases for error notification - * and potential retries. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_LAST_CALL_FAIL_CAUSE - * - * Deprecated use the status field in RIL_Data_Call_Response_v6. - */ - -#define RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE 56 - -/** - * RIL_REQUEST_DATA_CALL_LIST - * - * Returns the data call list. An entry is added when a - * RIL_REQUEST_SETUP_DATA_CALL is issued and removed on a - * RIL_REQUEST_DEACTIVATE_DATA_CALL. The list is emptied - * when RIL_REQUEST_RADIO_POWER off/on is issued. - * - * "data" is NULL - * "response" is an array of RIL_Data_Call_Response_v6 - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * - * See also: RIL_UNSOL_DATA_CALL_LIST_CHANGED - */ - -#define RIL_REQUEST_DATA_CALL_LIST 57 - -/** - * RIL_REQUEST_RESET_RADIO - DEPRECATED - * - * Request a radio reset. The RIL implementation may postpone - * the reset until after this request is responded to if the baseband - * is presently busy. - * - * The request is DEPRECATED, use RIL_REQUEST_RADIO_POWER - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * REQUEST_NOT_SUPPORTED - */ - -#define RIL_REQUEST_RESET_RADIO 58 - -/** - * RIL_REQUEST_OEM_HOOK_RAW - * - * This request reserved for OEM-specific uses. It passes raw byte arrays - * back and forth. - * - * It can be invoked on the Java side from - * com.android.internal.telephony.Phone.invokeOemRilRequestRaw() - * - * "data" is a char * of bytes copied from the byte[] data argument in java - * "response" is a char * of bytes that will returned via the - * caller's "response" Message here: - * (byte[])(((AsyncResult)response.obj).result) - * - * An error response here will result in - * (((AsyncResult)response.obj).result) == null and - * (((AsyncResult)response.obj).exception) being an instance of - * com.android.internal.telephony.gsm.CommandException - * - * Valid errors: - * All - */ - -#define RIL_REQUEST_OEM_HOOK_RAW 59 - -/** - * RIL_REQUEST_OEM_HOOK_STRINGS - * - * This request reserved for OEM-specific uses. It passes strings - * back and forth. - * - * It can be invoked on the Java side from - * com.android.internal.telephony.Phone.invokeOemRilRequestStrings() - * - * "data" is a const char **, representing an array of null-terminated UTF-8 - * strings copied from the "String[] strings" argument to - * invokeOemRilRequestStrings() - * - * "response" is a const char **, representing an array of null-terminated UTF-8 - * stings that will be returned via the caller's response message here: - * - * (String[])(((AsyncResult)response.obj).result) - * - * An error response here will result in - * (((AsyncResult)response.obj).result) == null and - * (((AsyncResult)response.obj).exception) being an instance of - * com.android.internal.telephony.gsm.CommandException - * - * Valid errors: - * All - */ - -#define RIL_REQUEST_OEM_HOOK_STRINGS 60 - -/** - * RIL_REQUEST_SCREEN_STATE - * - * Indicates the current state of the screen. When the screen is off, the - * RIL should notify the baseband to suppress certain notifications (eg, - * signal strength and changes in LAC/CID or BID/SID/NID/latitude/longitude) - * in an effort to conserve power. These notifications should resume when the - * screen is on. - * - * "data" is int * - * ((int *)data)[0] is == 1 for "Screen On" - * ((int *)data)[0] is == 0 for "Screen Off" - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SCREEN_STATE 61 - - -/** - * RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION - * - * Enables/disables supplementary service related notifications - * from the network. - * - * Notifications are reported via RIL_UNSOL_SUPP_SVC_NOTIFICATION. - * - * "data" is int * - * ((int *)data)[0] is == 1 for notifications enabled - * ((int *)data)[0] is == 0 for notifications disabled - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_UNSOL_SUPP_SVC_NOTIFICATION. - */ -#define RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION 62 - -/** - * RIL_REQUEST_WRITE_SMS_TO_SIM - * - * Stores a SMS message to SIM memory. - * - * "data" is RIL_SMS_WriteArgs * - * - * "response" is int * - * ((const int *)response)[0] is the record index where the message is stored. - * - * Valid errors: - * SUCCESS - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_WRITE_SMS_TO_SIM 63 - -/** - * RIL_REQUEST_DELETE_SMS_ON_SIM - * - * Deletes a SMS message from SIM memory. - * - * "data" is int * - * ((int *)data)[0] is the record index of the message to delete. - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_DELETE_SMS_ON_SIM 64 - -/** - * RIL_REQUEST_SET_BAND_MODE - * - * Assign a specified band for RF configuration. - * - * "data" is int * - * ((int *)data)[0] is == 0 for "unspecified" (selected by baseband automatically) - * ((int *)data)[0] is == 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000) - * ((int *)data)[0] is == 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900) - * ((int *)data)[0] is == 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000) - * ((int *)data)[0] is == 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000) - * ((int *)data)[0] is == 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850) - * ((int *)data)[0] is == 6 for "Cellular (800-MHz Band)" - * ((int *)data)[0] is == 7 for "PCS (1900-MHz Band)" - * ((int *)data)[0] is == 8 for "Band Class 3 (JTACS Band)" - * ((int *)data)[0] is == 9 for "Band Class 4 (Korean PCS Band)" - * ((int *)data)[0] is == 10 for "Band Class 5 (450-MHz Band)" - * ((int *)data)[0] is == 11 for "Band Class 6 (2-GMHz IMT2000 Band)" - * ((int *)data)[0] is == 12 for "Band Class 7 (Upper 700-MHz Band)" - * ((int *)data)[0] is == 13 for "Band Class 8 (1800-MHz Band)" - * ((int *)data)[0] is == 14 for "Band Class 9 (900-MHz Band)" - * ((int *)data)[0] is == 15 for "Band Class 10 (Secondary 800-MHz Band)" - * ((int *)data)[0] is == 16 for "Band Class 11 (400-MHz European PAMR Band)" - * ((int *)data)[0] is == 17 for "Band Class 15 (AWS Band)" - * ((int *)data)[0] is == 18 for "Band Class 16 (US 2.5-GHz Band)" - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_BAND_MODE 65 - -/** - * RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE - * - * Query the list of band mode supported by RF. - * - * "data" is NULL - * - * "response" is int * - * "response" points to an array of int's, the int[0] is the size of array, reset is one for - * each available band mode. - * - * 0 for "unspecified" (selected by baseband automatically) - * 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000) - * 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900) - * 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000) - * 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000) - * 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850) - * 6 for "Cellular (800-MHz Band)" - * 7 for "PCS (1900-MHz Band)" - * 8 for "Band Class 3 (JTACS Band)" - * 9 for "Band Class 4 (Korean PCS Band)" - * 10 for "Band Class 5 (450-MHz Band)" - * 11 for "Band Class 6 (2-GMHz IMT2000 Band)" - * 12 for "Band Class 7 (Upper 700-MHz Band)" - * 13 for "Band Class 8 (1800-MHz Band)" - * 14 for "Band Class 9 (900-MHz Band)" - * 15 for "Band Class 10 (Secondary 800-MHz Band)" - * 16 for "Band Class 11 (400-MHz European PAMR Band)" - * 17 for "Band Class 15 (AWS Band)" - * 18 for "Band Class 16 (US 2.5-GHz Band)" - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_SET_BAND_MODE - */ -#define RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE 66 - -/** - * RIL_REQUEST_STK_GET_PROFILE - * - * Requests the profile of SIM tool kit. - * The profile indicates the SAT/USAT features supported by ME. - * The SAT/USAT features refer to 3GPP TS 11.14 and 3GPP TS 31.111 - * - * "data" is NULL - * - * "response" is a const char * containing SAT/USAT profile - * in hexadecimal format string starting with first byte of terminal profile - * - * Valid errors: - * RIL_E_SUCCESS - * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) - * RIL_E_GENERIC_FAILURE - */ -#define RIL_REQUEST_STK_GET_PROFILE 67 - -/** - * RIL_REQUEST_STK_SET_PROFILE - * - * Download the STK terminal profile as part of SIM initialization - * procedure - * - * "data" is a const char * containing SAT/USAT profile - * in hexadecimal format string starting with first byte of terminal profile - * - * "response" is NULL - * - * Valid errors: - * RIL_E_SUCCESS - * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) - * RIL_E_GENERIC_FAILURE - */ -#define RIL_REQUEST_STK_SET_PROFILE 68 - -/** - * RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND - * - * Requests to send a SAT/USAT envelope command to SIM. - * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111 - * - * "data" is a const char * containing SAT/USAT command - * in hexadecimal format string starting with command tag - * - * "response" is a const char * containing SAT/USAT response - * in hexadecimal format string starting with first byte of response - * (May be NULL) - * - * Valid errors: - * RIL_E_SUCCESS - * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) - * RIL_E_GENERIC_FAILURE - */ -#define RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND 69 - -/** - * RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE - * - * Requests to send a terminal response to SIM for a received - * proactive command - * - * "data" is a const char * containing SAT/USAT response - * in hexadecimal format string starting with first byte of response data - * - * "response" is NULL - * - * Valid errors: - * RIL_E_SUCCESS - * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) - * RIL_E_GENERIC_FAILURE - */ -#define RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE 70 - -/** - * RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM - * - * When STK application gets RIL_UNSOL_STK_CALL_SETUP, the call actually has - * been initialized by ME already. (We could see the call has been in the 'call - * list') So, STK application needs to accept/reject the call according as user - * operations. - * - * "data" is int * - * ((int *)data)[0] is > 0 for "accept" the call setup - * ((int *)data)[0] is == 0 for "reject" the call setup - * - * "response" is NULL - * - * Valid errors: - * RIL_E_SUCCESS - * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) - * RIL_E_GENERIC_FAILURE - */ -#define RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM 71 - -/** - * RIL_REQUEST_EXPLICIT_CALL_TRANSFER - * - * Connects the two calls and disconnects the subscriber from both calls. - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ -#define RIL_REQUEST_EXPLICIT_CALL_TRANSFER 72 - -/** - * RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE - * - * Requests to set the preferred network type for searching and registering - * (CS/PS domain, RAT, and operation mode) - * - * "data" is int * which is RIL_PreferredNetworkType - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * MODE_NOT_SUPPORTED - */ -#define RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 73 - -/** - * RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE - * - * Query the preferred network type (CS/PS domain, RAT, and operation mode) - * for searching and registering - * - * "data" is NULL - * - * "response" is int * - * ((int *)reponse)[0] is == RIL_PreferredNetworkType - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE - */ -#define RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE 74 - -/** - * RIL_REQUEST_NEIGHBORING_CELL_IDS - * - * Request neighboring cell id in GSM network - * - * "data" is NULL - * "response" must be a " const RIL_NeighboringCell** " - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_GET_NEIGHBORING_CELL_IDS 75 - -/** - * RIL_REQUEST_SET_LOCATION_UPDATES - * - * Enables/disables network state change notifications due to changes in - * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA). - * Basically +CREG=2 vs. +CREG=1 (TS 27.007). - * - * Note: The RIL implementation should default to "updates enabled" - * when the screen is on and "updates disabled" when the screen is off. - * - * "data" is int * - * ((int *)data)[0] is == 1 for updates enabled (+CREG=2) - * ((int *)data)[0] is == 0 for updates disabled (+CREG=1) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_REQUEST_SCREEN_STATE, RIL_UNSOL_RESPONSE_NETWORK_STATE_CHANGED - */ -#define RIL_REQUEST_SET_LOCATION_UPDATES 76 - -/** - * RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE - * - * Request to set the location where the CDMA subscription shall - * be retrieved - * - * "data" is int * - * ((int *)data)[0] is == RIL_CdmaSubscriptionSource - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * SIM_ABSENT - * SUBSCRIPTION_NOT_AVAILABLE - * - * See also: RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE - */ -#define RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 77 - -/** - * RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE - * - * Request to set the roaming preferences in CDMA - * - * "data" is int * - * ((int *)data)[0] is == 0 for Home Networks only, as defined in PRL - * ((int *)data)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL - * ((int *)data)[0] is == 2 for Roaming on Any Network, as defined in the PRL - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE 78 - -/** - * RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE - * - * Request the actual setting of the roaming preferences in CDMA in the modem - * - * "data" is NULL - * - * "response" is int * - * ((int *)response)[0] is == 0 for Home Networks only, as defined in PRL - * ((int *)response)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL - * ((int *)response)[0] is == 2 for Roaming on Any Network, as defined in the PRL - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE 79 - -/** - * RIL_REQUEST_SET_TTY_MODE - * - * Request to set the TTY mode - * - * "data" is int * - * ((int *)data)[0] is == 0 for TTY off - * ((int *)data)[0] is == 1 for TTY Full - * ((int *)data)[0] is == 2 for TTY HCO (hearing carryover) - * ((int *)data)[0] is == 3 for TTY VCO (voice carryover) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_TTY_MODE 80 - -/** - * RIL_REQUEST_QUERY_TTY_MODE - * - * Request the setting of TTY mode - * - * "data" is NULL - * - * "response" is int * - * ((int *)response)[0] is == 0 for TTY off - * ((int *)response)[0] is == 1 for TTY Full - * ((int *)response)[0] is == 2 for TTY HCO (hearing carryover) - * ((int *)response)[0] is == 3 for TTY VCO (voice carryover) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_QUERY_TTY_MODE 81 - -/** - * RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE - * - * Request to set the preferred voice privacy mode used in voice - * scrambling - * - * "data" is int * - * ((int *)data)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask) - * ((int *)data)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE 82 - -/** - * RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE - * - * Request the setting of preferred voice privacy mode - * - * "data" is NULL - * - * "response" is int * - * ((int *)response)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask) - * ((int *)response)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE 83 - -/** - * RIL_REQUEST_CDMA_FLASH - * - * Send FLASH - * - * "data" is const char * - * ((const char *)data)[0] is a FLASH string - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_FLASH 84 - -/** - * RIL_REQUEST_CDMA_BURST_DTMF - * - * Send DTMF string - * - * "data" is const char ** - * ((const char **)data)[0] is a DTMF string - * ((const char **)data)[1] is the DTMF ON length in milliseconds, or 0 to use - * default - * ((const char **)data)[2] is the DTMF OFF length in milliseconds, or 0 to use - * default - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_BURST_DTMF 85 - -/** - * RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY - * - * Takes a 26 digit string (20 digit AKEY + 6 digit checksum). - * If the checksum is valid the 20 digit AKEY is written to NV, - * replacing the existing AKEY no matter what it was before. - * - * "data" is const char * - * ((const char *)data)[0] is a 26 digit string (ASCII digits '0'-'9') - * where the last 6 digits are a checksum of the - * first 20, as specified in TR45.AHAG - * "Common Cryptographic Algorithms, Revision D.1 - * Section 2.2" - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY 86 - -/** - * RIL_REQUEST_CDMA_SEND_SMS - * - * Send a CDMA SMS message - * - * "data" is const RIL_CDMA_SMS_Message * - * - * "response" is a const RIL_SMS_Response * - * - * Based on the return error, caller decides to resend if sending sms - * fails. The CDMA error class is derived as follows, - * SUCCESS is error class 0 (no error) - * SMS_SEND_FAIL_RETRY is error class 2 (temporary failure) - * and GENERIC_FAILURE is error class 3 (permanent and no retry) - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SMS_SEND_FAIL_RETRY - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_SEND_SMS 87 - -/** - * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE - * - * Acknowledge the success or failure in the receipt of SMS - * previously indicated via RIL_UNSOL_RESPONSE_CDMA_NEW_SMS - * - * "data" is const RIL_CDMA_SMS_Ack * - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 88 - -/** - * RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG - * - * Request the setting of GSM/WCDMA Cell Broadcast SMS config. - * - * "data" is NULL - * - * "response" is a const RIL_GSM_BroadcastSmsConfigInfo ** - * "responselen" is count * sizeof (RIL_GSM_BroadcastSmsConfigInfo *) - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG 89 - -/** - * RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG - * - * Set GSM/WCDMA Cell Broadcast SMS config - * - * "data" is a const RIL_GSM_BroadcastSmsConfigInfo ** - * "datalen" is count * sizeof(RIL_GSM_BroadcastSmsConfigInfo *) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG 90 - -/** - * RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION - * -* Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS - * - * "data" is const int * - * (const int *)data[0] indicates to activate or turn off the - * reception of GSM/WCDMA Cell Broadcast SMS, 0-1, - * 0 - Activate, 1 - Turn off - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION 91 - -/** - * RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG - * - * Request the setting of CDMA Broadcast SMS config - * - * "data" is NULL - * - * "response" is a const RIL_CDMA_BroadcastSmsConfigInfo ** - * "responselen" is count * sizeof (RIL_CDMA_BroadcastSmsConfigInfo *) - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG 92 - -/** - * RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG - * - * Set CDMA Broadcast SMS config - * - * "data" is an const RIL_CDMA_BroadcastSmsConfigInfo ** - * "datalen" is count * sizeof(const RIL_CDMA_BroadcastSmsConfigInfo *) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG 93 - -/** - * RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION - * - * Enable or disable the reception of CDMA Broadcast SMS - * - * "data" is const int * - * (const int *)data[0] indicates to activate or turn off the - * reception of CDMA Broadcast SMS, 0-1, - * 0 - Activate, 1 - Turn off - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION 94 - -/** - * RIL_REQUEST_CDMA_SUBSCRIPTION - * - * Request the device MDN / H_SID / H_NID. - * - * The request is only allowed when CDMA subscription is available. When CDMA - * subscription is changed, application layer should re-issue the request to - * update the subscription information. - * - * If a NULL value is returned for any of the device id, it means that error - * accessing the device. - * - * "response" is const char ** - * ((const char **)response)[0] is MDN if CDMA subscription is available - * ((const char **)response)[1] is a comma separated list of H_SID (Home SID) if - * CDMA subscription is available, in decimal format - * ((const char **)response)[2] is a comma separated list of H_NID (Home NID) if - * CDMA subscription is available, in decimal format - * ((const char **)response)[3] is MIN (10 digits, MIN2+MIN1) if CDMA subscription is available - * ((const char **)response)[4] is PRL version if CDMA subscription is available - * - * Valid errors: - * SUCCESS - * RIL_E_SUBSCRIPTION_NOT_AVAILABLE - */ - -#define RIL_REQUEST_CDMA_SUBSCRIPTION 95 - -/** - * RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM - * - * Stores a CDMA SMS message to RUIM memory. - * - * "data" is RIL_CDMA_SMS_WriteArgs * - * - * "response" is int * - * ((const int *)response)[0] is the record index where the message is stored. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM 96 - -/** - * RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM - * - * Deletes a CDMA SMS message from RUIM memory. - * - * "data" is int * - * ((int *)data)[0] is the record index of the message to delete. - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM 97 - -/** - * RIL_REQUEST_DEVICE_IDENTITY - * - * Request the device ESN / MEID / IMEI / IMEISV. - * - * The request is always allowed and contains GSM and CDMA device identity; - * it substitutes the deprecated requests RIL_REQUEST_GET_IMEI and - * RIL_REQUEST_GET_IMEISV. - * - * If a NULL value is returned for any of the device id, it means that error - * accessing the device. - * - * When CDMA subscription is changed the ESN/MEID may change. The application - * layer should re-issue the request to update the device identity in this case. - * - * "response" is const char ** - * ((const char **)response)[0] is IMEI if GSM subscription is available - * ((const char **)response)[1] is IMEISV if GSM subscription is available - * ((const char **)response)[2] is ESN if CDMA subscription is available - * ((const char **)response)[3] is MEID if CDMA subscription is available - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_DEVICE_IDENTITY 98 - -/** - * RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE - * - * Request the radio's system selection module to exit emergency - * callback mode. RIL will not respond with SUCCESS until the modem has - * completely exited from Emergency Callback Mode. - * - * "data" is NULL - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE 99 - -/** - * RIL_REQUEST_GET_SMSC_ADDRESS - * - * Queries the default Short Message Service Center address on the device. - * - * "data" is NULL - * - * "response" is const char * containing the SMSC address. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_GET_SMSC_ADDRESS 100 - -/** - * RIL_REQUEST_SET_SMSC_ADDRESS - * - * Sets the default Short Message Service Center address on the device. - * - * "data" is const char * containing the SMSC address. - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_SET_SMSC_ADDRESS 101 - -/** - * RIL_REQUEST_REPORT_SMS_MEMORY_STATUS - * - * Indicates whether there is storage available for new SMS messages. - * - * "data" is int * - * ((int *)data)[0] is 1 if memory is available for storing new messages - * is 0 if memory capacity is exceeded - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_REPORT_SMS_MEMORY_STATUS 102 - -/** - * RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING - * - * Indicates that the StkSerivce is running and is - * ready to receive RIL_UNSOL_STK_XXXXX commands. - * - * "data" is NULL - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 103 - -/** - * RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE - * - * Request to query the location where the CDMA subscription shall - * be retrieved - * - * "data" is NULL - * - * "response" is int * - * ((int *)data)[0] is == RIL_CdmaSubscriptionSource - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * SUBSCRIPTION_NOT_AVAILABLE - * - * See also: RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE - */ -#define RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 104 - -/** - * RIL_REQUEST_ISIM_AUTHENTICATION - * - * Request the ISIM application on the UICC to perform AKA - * challenge/response algorithm for IMS authentication - * - * "data" is a const char * containing the challenge string in Base64 format - * "response" is a const char * containing the response in Base64 format - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_ISIM_AUTHENTICATION 105 - -/** - * RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU - * - * Acknowledge successful or failed receipt of SMS previously indicated - * via RIL_UNSOL_RESPONSE_NEW_SMS, including acknowledgement TPDU to send - * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU. - * - * "data" is const char ** - * ((const char **)data)[0] is "1" on successful receipt (send RP-ACK) - * is "0" on failed receipt (send RP-ERROR) - * ((const char **)data)[1] is the acknowledgement TPDU in hexadecimal format - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU 106 - -/** - * RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS - * - * Requests to send a SAT/USAT envelope command to SIM. - * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111. - * - * This request has one difference from RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND: - * the SW1 and SW2 status bytes from the UICC response are returned along with - * the response data, using the same structure as RIL_REQUEST_SIM_IO. - * - * The RIL implementation shall perform the normal processing of a '91XX' - * response in SW1/SW2 to retrieve the pending proactive command and send it - * as an unsolicited response, as RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND does. - * - * "data" is a const char * containing the SAT/USAT command - * in hexadecimal format starting with command tag - * - * "response" is a const RIL_SIM_IO_Response * - * - * Valid errors: - * RIL_E_SUCCESS - * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) - * RIL_E_GENERIC_FAILURE - */ -#define RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS 107 - -/** - * RIL_REQUEST_VOICE_RADIO_TECH - * - * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only - * when radio state is RADIO_STATE_ON - * - * "data" is NULL - * "response" is int * - * ((int *) response)[0] is of type const RIL_RadioTechnology - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_VOICE_RADIO_TECH 108 - -/** - * RIL_REQUEST_GET_CELL_INFO_LIST - * - * Request all of the current cell information known to the radio. The radio - * must a list of all current cells, including the neighboring cells. If for a particular - * cell information isn't known then the appropriate unknown value will be returned. - * This does not cause or change the rate of RIL_UNSOL_CELL_INFO_LIST. - * - * "data" is NULL - * - * "response" is an array of RIL_CellInfo. - */ -#define RIL_REQUEST_GET_CELL_INFO_LIST 109 - -/** - * RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE - * - * Sets the minimum time between when RIL_UNSOL_CELL_INFO_LIST should be invoked. - * A value of 0, means invoke RIL_UNSOL_CELL_INFO_LIST when any of the reported - * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue - * a RIL_UNSOL_CELL_INFO_LIST. - * - * "data" is int * - * ((int *)data)[0] is minimum time in milliseconds - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 110 - -/** - * RIL_REQUEST_SET_INITIAL_ATTACH_APN - * - * Set an apn to initial attach network - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * SUBSCRIPTION_NOT_AVAILABLE - */ -#define RIL_REQUEST_SET_INITIAL_ATTACH_APN 111 - -/** - * RIL_REQUEST_IMS_REGISTRATION_STATE - * - * Request current IMS registration state - * - * "data" is NULL - * - * "response" is int * - * ((int *)response)[0] is registration state: - * 0 - Not registered - * 1 - Registered - * - * If ((int*)response)[0] is = 1, then ((int *) response)[1] - * must follow with IMS SMS format: - * - * ((int *) response)[1] is of type RIL_RadioTechnologyFamily - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_IMS_REGISTRATION_STATE 112 - -/** - * RIL_REQUEST_IMS_SEND_SMS - * - * Send a SMS message over IMS - * - * "data" is const RIL_IMS_SMS_Message * - * - * "response" is a const RIL_SMS_Response * - * - * Based on the return error, caller decides to resend if sending sms - * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry. - * In case of retry, data is encoded based on Voice Technology available. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * SMS_SEND_FAIL_RETRY - * FDN_CHECK_FAILURE - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_IMS_SEND_SMS 113 - -/** - * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC - * - * Request APDU exchange on the basic channel. This command reflects TS 27.007 - * "generic SIM access" operation (+CSIM). The modem must ensure proper function - * of GSM/CDMA, and filter commands appropriately. It should filter - * channel management and SELECT by DF name commands. - * - * "data" is a const RIL_SIM_APDU * - * "sessionid" field should be ignored. - * - * "response" is a const RIL_SIM_IO_Response * - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114 - -/** - * RIL_REQUEST_SIM_OPEN_CHANNEL - * - * Open a new logical channel and select the given application. This command - * reflects TS 27.007 "open logical channel" operation (+CCHO). - * - * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220. - * - * "response" is int * - * ((int *)data)[0] contains the session id of the logical channel. - * ((int *)data)[1] onwards may optionally contain the select response for the - * open channel command with one byte per integer. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * MISSING_RESOURCE - * NO_SUCH_ELEMENT - */ -#define RIL_REQUEST_SIM_OPEN_CHANNEL 115 - -/** - * RIL_REQUEST_SIM_CLOSE_CHANNEL - * - * Close a previously opened logical channel. This command reflects TS 27.007 - * "close logical channel" operation (+CCHC). - * - * "data" is int * - * ((int *)data)[0] is the session id of logical the channel to close. - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SIM_CLOSE_CHANNEL 116 - -/** - * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL - * - * Exchange APDUs with a UICC over a previously opened logical channel. This - * command reflects TS 27.007 "generic logical channel access" operation - * (+CGLA). The modem should filter channel management and SELECT by DF name - * commands. - * - * "data" is a const RIL_SIM_APDU* - * - * "response" is a const RIL_SIM_IO_Response * - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117 - -/** - * RIL_REQUEST_NV_READ_ITEM - * - * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. - * This is used for device configuration by some CDMA operators. - * - * "data" is a const RIL_NV_ReadItem * - * - * "response" is const char * containing the contents of the NV item - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_NV_READ_ITEM 118 - -/** - * RIL_REQUEST_NV_WRITE_ITEM - * - * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. - * This is used for device configuration by some CDMA operators. - * - * "data" is a const RIL_NV_WriteItem * - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_NV_WRITE_ITEM 119 - -/** - * RIL_REQUEST_NV_WRITE_CDMA_PRL - * - * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. - * This is used for device configuration by some CDMA operators. - * - * "data" is a const char * containing the PRL as a byte array - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_NV_WRITE_CDMA_PRL 120 - -/** - * RIL_REQUEST_NV_RESET_CONFIG - * - * Reset the radio NV configuration to the factory state. - * This is used for device configuration by some CDMA operators. - * - * "data" is int * - * ((int *)data)[0] is 1 to reload all NV items - * ((int *)data)[0] is 2 for erase NV reset (SCRTN) - * ((int *)data)[0] is 3 for factory reset (RTN) - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_NV_RESET_CONFIG 121 - - /** RIL_REQUEST_SET_UICC_SUBSCRIPTION - * FIXME This API needs to have more documentation. - * - * Selection/de-selection of a subscription from a SIM card - * "data" is const RIL_SelectUiccSub* - - * - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * SUBSCRIPTION_NOT_SUPPORTED - * - */ -#define RIL_REQUEST_SET_UICC_SUBSCRIPTION 122 - -/** - * RIL_REQUEST_ALLOW_DATA - * - * Tells the modem whether data calls are allowed or not - * - * "data" is int * - * FIXME slotId and aid will be added. - * ((int *)data)[0] is == 0 to allow data calls - * ((int *)data)[0] is == 1 to disallow data calls - * - * "response" is NULL - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * - */ -#define RIL_REQUEST_ALLOW_DATA 123 - -/** - * RIL_REQUEST_GET_HARDWARE_CONFIG - * - * Request all of the current hardware (modem and sim) associated - * with the RIL. - * - * "data" is NULL - * - * "response" is an array of RIL_HardwareConfig. - */ -#define RIL_REQUEST_GET_HARDWARE_CONFIG 124 - -/** - * RIL_REQUEST_SIM_AUTHENTICATION - * - * Returns the response of SIM Authentication through RIL to a - * challenge request. - * - * "data" Base64 encoded string containing challenge: - * int authContext; P2 value of authentication command, see P2 parameter in - * 3GPP TS 31.102 7.1.2 - * char *authData; the challenge string in Base64 format, see 3GPP - * TS 31.102 7.1.2 - * char *aid; AID value, See ETSI 102.221 8.1 and 101.220 4, - * NULL if no value - * - * "response" Base64 encoded strings containing response: - * int sw1; Status bytes per 3GPP TS 31.102 section 7.3 - * int sw2; - * char *simResponse; Response in Base64 format, see 3GPP TS 31.102 7.1.2 - */ -#define RIL_REQUEST_SIM_AUTHENTICATION 125 - -/** - * RIL_REQUEST_GET_DC_RT_INFO - * - * The request is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO - * Requests the Data Connection Real Time Info - * - * "data" is NULL - * - * "response" is the most recent RIL_DcRtInfo - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - * - * See also: RIL_UNSOL_DC_RT_INFO_CHANGED - */ -#define RIL_REQUEST_GET_DC_RT_INFO 126 - -/** - * RIL_REQUEST_SET_DC_RT_INFO_RATE - * - * The request is DEPRECATED - * This is the minimum number of milliseconds between successive - * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate - * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of - * 0 means send as fast as possible. - * - * "data" The number of milliseconds as an int - * - * "response" is null - * - * Valid errors: - * SUCCESS must not fail - */ -#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127 - -/** - * RIL_REQUEST_SET_DATA_PROFILE - * - * Set data profile in modem - * Modem should erase existed profiles from framework, and apply new profiles - * "data" is an const RIL_DataProfileInfo ** - * "datalen" is count * sizeof(const RIL_DataProfileInfo *) - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - * SUBSCRIPTION_NOT_AVAILABLE - */ -#define RIL_REQUEST_SET_DATA_PROFILE 128 - -/** - * RIL_REQUEST_SHUTDOWN - * - * Device is shutting down. All further commands are ignored - * and RADIO_NOT_AVAILABLE must be returned. - * - * "data" is null - * "response" is NULL - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SHUTDOWN 129 - -/** - * RIL_REQUEST_GET_RADIO_CAPABILITY - * - * Used to get phone radio capablility. - * - * "data" is the RIL_RadioCapability structure - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_GET_RADIO_CAPABILITY 130 - -/** - * RIL_REQUEST_SET_RADIO_CAPABILITY - * - * Used to set the phones radio capability. Be VERY careful - * using this request as it may cause some vendor modems to reset. Because - * of the possible modem reset any RIL commands after this one may not be - * processed. - * - * "data" is the RIL_RadioCapability structure - * - * "response" is the RIL_RadioCapability structure, used to feedback return status - * - * Valid errors: - * SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds. - * RADIO_NOT_AVAILABLE - * GENERIC_FAILURE - */ -#define RIL_REQUEST_SET_RADIO_CAPABILITY 131 - - /** - * RIL_REQUEST_START_LCE - * - * Start Link Capacity Estimate (LCE) service if supported by the radio. - * - * "data" is const int * - * ((const int*)data)[0] specifies the desired reporting interval (ms). - * ((const int*)data)[1] specifies the LCE service mode. 1: PULL; 0: PUSH. - * - * "response" is the RIL_LceStatusInfo. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * LCE_NOT_SUPPORTED - */ -#define RIL_REQUEST_START_LCE 132 - -/** - * RIL_REQUEST_STOP_LCE - * - * Stop Link Capacity Estimate (LCE) service, the STOP operation should be - * idempotent for the radio modem. - * - * "response" is the RIL_LceStatusInfo. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * LCE_NOT_SUPPORTED - */ -#define RIL_REQUEST_STOP_LCE 133 - -/** - * RIL_REQUEST_PULL_LCEDATA - * - * Pull LCE service for capacity information. - * - * "response" is the RIL_LceDataInfo. - * - * Valid errors: - * SUCCESS - * RADIO_NOT_AVAILABLE - * LCE_NOT_SUPPORTED - */ -#define RIL_REQUEST_PULL_LCEDATA 134 - /** - * RIL_REQUEST_GET_ACTIVITY_INFO - * - * Get modem activity statisitics info. - * - * There can be multiple RIL_REQUEST_GET_ACTIVITY_INFO calls to modem. - * Once the response for the request is sent modem will clear - * current statistics information. - * - * "data" is null - * "response" is const RIL_ActivityStatsInfo * - * - * Valid errors: - * - * SUCCESS - * RADIO_NOT_AVAILABLE (radio resetting) - * GENERIC_FAILURE - */ -#define RIL_REQUEST_GET_ACTIVITY_INFO 135 - - -/* SAMSUNG REQUESTS */ -#undef RIL_REQUEST_SIM_OPEN_CHANNEL -#undef RIL_REQUEST_SIM_CLOSE_CHANNEL - -#define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002 - -#define RIL_REQUEST_SEND_ENCODED_USSD 10005 -#define RIL_REQUEST_SET_PDA_MEMORY_STATUS 10006 -#define RIL_REQUEST_GET_PHONEBOOK_STORAGE_INFO 10007 -#define RIL_REQUEST_GET_PHONEBOOK_ENTRY 10008 -#define RIL_REQUEST_ACCESS_PHONEBOOK_ENTRY 10009 -#define RIL_REQUEST_DIAL_VIDEO_CALL 10010 -#define RIL_REQUEST_CALL_DEFLECTION 10011 -#define RIL_REQUEST_READ_SMS_FROM_SIM 10012 -#define RIL_REQUEST_USIM_PB_CAPA 10013 -#define RIL_REQUEST_LOCK_INFO 10014 - -#define RIL_REQUEST_DIAL_EMERGENCY 10016 -#define RIL_REQUEST_GET_STOREAD_MSG_COUNT 10017 -#define RIL_REQUEST_STK_SIM_INIT_EVENT 10018 -#define RIL_REQUEST_GET_LINE_ID 10019 -#define RIL_REQUEST_SET_LINE_ID 10020 -#define RIL_REQUEST_GET_SERIAL_NUMBER 10021 -#define RIL_REQUEST_GET_MANUFACTURE_DATE_NUMBER 10022 -#define RIL_REQUEST_GET_BARCODE_NUMBER 10023 -#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_BOOTSTRAP 10024 -#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_NAF 10025 -#define RIL_REQUEST_SIM_TRANSMIT_BASIC 10026 -#define RIL_REQUEST_SIM_OPEN_CHANNEL 10027 -#define RIL_REQUEST_SIM_CLOSE_CHANNEL 10028 -#define RIL_REQUEST_SIM_TRANSMIT_CHANNEL 10029 -#define RIL_REQUEST_SIM_AUTH 10030 -#define RIL_REQUEST_PS_ATTACH 10031 -#define RIL_REQUEST_PS_DETACH 10032 -#define RIL_REQUEST_ACTIVATE_DATA_CALL 10033 -#define RIL_REQUEST_CHANGE_SIM_PERSO 10034 -#define RIL_REQUEST_ENTER_SIM_PERSO 10035 -#define RIL_REQUEST_GET_TIME_INFO 10036 -#define RIL_REQUEST_OMADM_SETUP_SESSION 10037 -#define RIL_REQUEST_OMADM_SERVER_START_SESSION 10038 -#define RIL_REQUEST_OMADM_CLIENT_START_SESSION 10039 -#define RIL_REQUEST_OMADM_SEND_DATA 10040 -#define RIL_REQUEST_CDMA_GET_DATAPROFILE 10041 -#define RIL_REQUEST_CDMA_SET_DATAPROFILE 10042 -#define RIL_REQUEST_CDMA_GET_SYSTEMPROPERTIES 10043 -#define RIL_REQUEST_CDMA_SET_SYSTEMPROPERTIES 10044 -#define RIL_REQUEST_SEND_SMS_COUNT 10045 -#define RIL_REQUEST_SEND_SMS_MSG 10046 -#define RIL_REQUEST_SEND_SMS_MSG_READ_STATUS 10047 -#define RIL_REQUEST_MODEM_HANGUP 10048 -#define RIL_REQUEST_SET_SIM_POWER 10049 -#define RIL_REQUEST_SET_PREFERRED_NETWORK_LIST 10050 -#define RIL_REQUEST_GET_PREFERRED_NETWORK_LIST 10051 -#define RIL_REQUEST_HANGUP_VT 10052 - - -/***********************************************************************/ - - -#define RIL_UNSOL_RESPONSE_BASE 1000 - -/** - * RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED - * - * Indicate when value of RIL_RadioState has changed. - * - * Callee will invoke RIL_RadioStateRequest method on main thread - * - * "data" is NULL - */ - -#define RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED 1000 - - -/** - * RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED - * - * Indicate when call state has changed - * - * Callee will invoke RIL_REQUEST_GET_CURRENT_CALLS on main thread - * - * "data" is NULL - * - * Response should be invoked on, for example, - * "RING", "BUSY", "NO CARRIER", and also call state - * transitions (DIALING->ALERTING ALERTING->ACTIVE) - * - * Redundent or extraneous invocations are tolerated - */ -#define RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED 1001 - - -/** - * RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED - * - * Called when the voice network state changed - * - * Callee will invoke the following requests on main thread: - * - * RIL_REQUEST_VOICE_REGISTRATION_STATE - * RIL_REQUEST_OPERATOR - * - * "data" is NULL - * - * FIXME should this happen when SIM records are loaded? (eg, for - * EONS) - */ -#define RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED 1002 - -/** - * RIL_UNSOL_RESPONSE_NEW_SMS - * - * Called when new SMS is received. - * - * "data" is const char * - * This is a pointer to a string containing the PDU of an SMS-DELIVER - * as an ascii string of hex digits. The PDU starts with the SMSC address - * per TS 27.005 (+CMT:) - * - * Callee will subsequently confirm the receipt of thei SMS with a - * RIL_REQUEST_SMS_ACKNOWLEDGE - * - * No new RIL_UNSOL_RESPONSE_NEW_SMS - * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a - * RIL_REQUEST_SMS_ACKNOWLEDGE has been received - */ - -#define RIL_UNSOL_RESPONSE_NEW_SMS 1003 - -/** - * RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT - * - * Called when new SMS Status Report is received. - * - * "data" is const char * - * This is a pointer to a string containing the PDU of an SMS-STATUS-REPORT - * as an ascii string of hex digits. The PDU starts with the SMSC address - * per TS 27.005 (+CDS:). - * - * Callee will subsequently confirm the receipt of the SMS with a - * RIL_REQUEST_SMS_ACKNOWLEDGE - * - * No new RIL_UNSOL_RESPONSE_NEW_SMS - * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a - * RIL_REQUEST_SMS_ACKNOWLEDGE has been received - */ - -#define RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT 1004 - -/** - * RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM - * - * Called when new SMS has been stored on SIM card - * - * "data" is const int * - * ((const int *)data)[0] contains the slot index on the SIM that contains - * the new message - */ - -#define RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM 1005 - -/** - * RIL_UNSOL_ON_USSD - * - * Called when a new USSD message is received. - * - * "data" is const char ** - * ((const char **)data)[0] points to a type code, which is - * one of these string values: - * "0" USSD-Notify -- text in ((const char **)data)[1] - * "1" USSD-Request -- text in ((const char **)data)[1] - * "2" Session terminated by network - * "3" other local client (eg, SIM Toolkit) has responded - * "4" Operation not supported - * "5" Network timeout - * - * The USSD session is assumed to persist if the type code is "1", otherwise - * the current session (if any) is assumed to have terminated. - * - * ((const char **)data)[1] points to a message string if applicable, which - * should always be in UTF-8. - */ -#define RIL_UNSOL_ON_USSD 1006 -/* Previously #define RIL_UNSOL_ON_USSD_NOTIFY 1006 */ - -/** - * RIL_UNSOL_ON_USSD_REQUEST - * - * Obsolete. Send via RIL_UNSOL_ON_USSD - */ -#define RIL_UNSOL_ON_USSD_REQUEST 1007 - -/** - * RIL_UNSOL_NITZ_TIME_RECEIVED - * - * Called when radio has received a NITZ time message - * - * "data" is const char * pointing to NITZ time string - * in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt" - */ -#define RIL_UNSOL_NITZ_TIME_RECEIVED 1008 - -/** - * RIL_UNSOL_SIGNAL_STRENGTH - * - * Radio may report signal strength rather han have it polled. - * - * "data" is a const RIL_SignalStrength * - */ -#define RIL_UNSOL_SIGNAL_STRENGTH 1009 - - -/** - * RIL_UNSOL_DATA_CALL_LIST_CHANGED - * - * "data" is an array of RIL_Data_Call_Response_v6 identical to that - * returned by RIL_REQUEST_DATA_CALL_LIST. It is the complete list - * of current data contexts including new contexts that have been - * activated. A data call is only removed from this list when the - * framework sends a RIL_REQUEST_DEACTIVATE_DATA_CALL or the radio - * is powered off/on. - * - * See also: RIL_REQUEST_DATA_CALL_LIST - */ - -#define RIL_UNSOL_DATA_CALL_LIST_CHANGED 1010 - -/** - * RIL_UNSOL_SUPP_SVC_NOTIFICATION - * - * Reports supplementary service related notification from the network. - * - * "data" is a const RIL_SuppSvcNotification * - * - */ - -#define RIL_UNSOL_SUPP_SVC_NOTIFICATION 1011 - -/** - * RIL_UNSOL_STK_SESSION_END - * - * Indicate when STK session is terminated by SIM. - * - * "data" is NULL - */ -#define RIL_UNSOL_STK_SESSION_END 1012 - -/** - * RIL_UNSOL_STK_PROACTIVE_COMMAND - * - * Indicate when SIM issue a STK proactive command to applications - * - * "data" is a const char * containing SAT/USAT proactive command - * in hexadecimal format string starting with command tag - * - */ -#define RIL_UNSOL_STK_PROACTIVE_COMMAND 1013 - -/** - * RIL_UNSOL_STK_EVENT_NOTIFY - * - * Indicate when SIM notifies applcations some event happens. - * Generally, application does not need to have any feedback to - * SIM but shall be able to indicate appropriate messages to users. - * - * "data" is a const char * containing SAT/USAT commands or responses - * sent by ME to SIM or commands handled by ME, in hexadecimal format string - * starting with first byte of response data or command tag - * - */ -#define RIL_UNSOL_STK_EVENT_NOTIFY 1014 - -/** - * RIL_UNSOL_STK_CALL_SETUP - * - * Indicate when SIM wants application to setup a voice call. - * - * "data" is const int * - * ((const int *)data)[0] contains timeout value (in milliseconds) - */ -#define RIL_UNSOL_STK_CALL_SETUP 1015 - -/** - * RIL_UNSOL_SIM_SMS_STORAGE_FULL - * - * Indicates that SMS storage on the SIM is full. Sent when the network - * attempts to deliver a new SMS message. Messages cannot be saved on the - * SIM until space is freed. In particular, incoming Class 2 messages - * cannot be stored. - * - * "data" is null - * - */ -#define RIL_UNSOL_SIM_SMS_STORAGE_FULL 1016 - -/** - * RIL_UNSOL_SIM_REFRESH - * - * Indicates that file(s) on the SIM have been updated, or the SIM - * has been reinitialized. - * - * In the case where RIL is version 6 or older: - * "data" is an int * - * ((int *)data)[0] is a RIL_SimRefreshResult. - * ((int *)data)[1] is the EFID of the updated file if the result is - * SIM_FILE_UPDATE or NULL for any other result. - * - * In the case where RIL is version 7: - * "data" is a RIL_SimRefreshResponse_v7 * - * - * Note: If the SIM state changes as a result of the SIM refresh (eg, - * SIM_READY -> SIM_LOCKED_OR_ABSENT), RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED - * should be sent. - */ -#define RIL_UNSOL_SIM_REFRESH 1017 - -/** - * RIL_UNSOL_CALL_RING - * - * Ring indication for an incoming call (eg, RING or CRING event). - * There must be at least one RIL_UNSOL_CALL_RING at the beginning - * of a call and sending multiple is optional. If the system property - * ro.telephony.call_ring.multiple is false then the upper layers - * will generate the multiple events internally. Otherwise the vendor - * ril must generate multiple RIL_UNSOL_CALL_RING if - * ro.telephony.call_ring.multiple is true or if it is absent. - * - * The rate of these events is controlled by ro.telephony.call_ring.delay - * and has a default value of 3000 (3 seconds) if absent. - * - * "data" is null for GSM - * "data" is const RIL_CDMA_SignalInfoRecord * if CDMA - */ -#define RIL_UNSOL_CALL_RING 1018 - -/** - * RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED - * - * Indicates that SIM state changes. - * - * Callee will invoke RIL_REQUEST_GET_SIM_STATUS on main thread - - * "data" is null - */ -#define RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 1019 - -/** - * RIL_UNSOL_RESPONSE_CDMA_NEW_SMS - * - * Called when new CDMA SMS is received - * - * "data" is const RIL_CDMA_SMS_Message * - * - * Callee will subsequently confirm the receipt of the SMS with - * a RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE - * - * No new RIL_UNSOL_RESPONSE_CDMA_NEW_SMS should be sent until - * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE has been received - * - */ -#define RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 1020 - -/** - * RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS - * - * Called when new Broadcast SMS is received - * - * "data" can be one of the following: - * If received from GSM network, "data" is const char of 88 bytes - * which indicates each page of a CBS Message sent to the MS by the - * BTS as coded in 3GPP 23.041 Section 9.4.1.2. - * If received from UMTS network, "data" is const char of 90 up to 1252 - * bytes which contain between 1 and 15 CBS Message pages sent as one - * packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2. - * - */ -#define RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS 1021 - -/** - * RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL - * - * Indicates that SMS storage on the RUIM is full. Messages - * cannot be saved on the RUIM until space is freed. - * - * "data" is null - * - */ -#define RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL 1022 - -/** - * RIL_UNSOL_RESTRICTED_STATE_CHANGED - * - * Indicates a restricted state change (eg, for Domain Specific Access Control). - * - * Radio need send this msg after radio off/on cycle no matter it is changed or not. - * - * "data" is an int * - * ((int *)data)[0] contains a bitmask of RIL_RESTRICTED_STATE_* values. - */ -#define RIL_UNSOL_RESTRICTED_STATE_CHANGED 1023 - -/** - * RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE - * - * Indicates that the radio system selection module has - * autonomously entered emergency callback mode. - * - * "data" is null - * - */ -#define RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE 1024 - -/** - * RIL_UNSOL_CDMA_CALL_WAITING - * - * Called when CDMA radio receives a call waiting indication. - * - * "data" is const RIL_CDMA_CallWaiting * - * - */ -#define RIL_UNSOL_CDMA_CALL_WAITING 1025 - -/** - * RIL_UNSOL_CDMA_OTA_PROVISION_STATUS - * - * Called when CDMA radio receives an update of the progress of an - * OTASP/OTAPA call. - * - * "data" is const int * - * For CDMA this is an integer OTASP/OTAPA status listed in - * RIL_CDMA_OTA_ProvisionStatus. - * - */ -#define RIL_UNSOL_CDMA_OTA_PROVISION_STATUS 1026 - -/** - * RIL_UNSOL_CDMA_INFO_REC - * - * Called when CDMA radio receives one or more info recs. - * - * "data" is const RIL_CDMA_InformationRecords * - * - */ -#define RIL_UNSOL_CDMA_INFO_REC 1027 - -/** - * RIL_UNSOL_OEM_HOOK_RAW - * - * This is for OEM specific use. - * - * "data" is a byte[] - */ -#define RIL_UNSOL_OEM_HOOK_RAW 1028 - -/** - * RIL_UNSOL_RINGBACK_TONE - * - * Indicates that nework doesn't have in-band information, need to - * play out-band tone. - * - * "data" is an int * - * ((int *)data)[0] == 0 for stop play ringback tone. - * ((int *)data)[0] == 1 for start play ringback tone. - */ -#define RIL_UNSOL_RINGBACK_TONE 1029 - -/** - * RIL_UNSOL_RESEND_INCALL_MUTE - * - * Indicates that framework/application need reset the uplink mute state. - * - * There may be situations where the mute state becomes out of sync - * between the application and device in some GSM infrastructures. - * - * "data" is null - */ -#define RIL_UNSOL_RESEND_INCALL_MUTE 1030 - -/** - * RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED - * - * Called when CDMA subscription source changed. - * - * "data" is int * - * ((int *)data)[0] is == RIL_CdmaSubscriptionSource - */ -#define RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED 1031 - -/** - * RIL_UNSOL_CDMA_PRL_CHANGED - * - * Called when PRL (preferred roaming list) changes. - * - * "data" is int * - * ((int *)data)[0] is PRL_VERSION as would be returned by RIL_REQUEST_CDMA_SUBSCRIPTION - */ -#define RIL_UNSOL_CDMA_PRL_CHANGED 1032 - -/** - * RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE - * - * Called when Emergency Callback Mode Ends - * - * Indicates that the radio system selection module has - * proactively exited emergency callback mode. - * - * "data" is NULL - * - */ -#define RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE 1033 - -/** - * RIL_UNSOL_RIL_CONNECTED - * - * Called the ril connects and returns the version - * - * "data" is int * - * ((int *)data)[0] is RIL_VERSION - */ -#define RIL_UNSOL_RIL_CONNECTED 1034 - -/** - * RIL_UNSOL_VOICE_RADIO_TECH_CHANGED - * - * Indicates that voice technology has changed. Contains new radio technology - * as a data in the message. - * - * "data" is int * - * ((int *)data)[0] is of type const RIL_RadioTechnology - * - */ -#define RIL_UNSOL_VOICE_RADIO_TECH_CHANGED 1035 - -/** - * RIL_UNSOL_CELL_INFO_LIST - * - * Same information as returned by RIL_REQUEST_GET_CELL_INFO_LIST, but returned - * at the rate no greater than specified by RIL_REQUEST_SET_UNSOL_CELL_INFO_RATE. - * - * "data" is NULL - * - * "response" is an array of RIL_CellInfo. - */ -#define RIL_UNSOL_CELL_INFO_LIST 1036 - -/** - * RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED - * - * Called when IMS registration state has changed - * - * To get IMS registration state and IMS SMS format, callee needs to invoke the - * following request on main thread: - * - * RIL_REQUEST_IMS_REGISTRATION_STATE - * - * "data" is NULL - * - */ -#define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037 - -/** - * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED - * - * Indicated when there is a change in subscription status. - * This event will be sent in the following scenarios - * - subscription readiness at modem, which was selected by telephony layer - * - when subscription is deactivated by modem due to UICC card removal - * - When network invalidates the subscription i.e. attach reject due to authentication reject - * - * "data" is const int * - * ((const int *)data)[0] == 0 for Subscription Deactivated - * ((const int *)data)[0] == 1 for Subscription Activated - * - */ -#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038 - -/** - * RIL_UNSOL_SRVCC_STATE_NOTIFY - * - * Called when Single Radio Voice Call Continuity(SRVCC) - * progress state has changed - * - * "data" is int * - * ((int *)data)[0] is of type const RIL_SrvccState - * - */ - -#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039 - -/** - * RIL_UNSOL_HARDWARE_CONFIG_CHANGED - * - * Called when the hardware configuration associated with the RILd changes - * - * "data" is an array of RIL_HardwareConfig - * - */ -#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040 - -/** - * RIL_UNSOL_DC_RT_INFO_CHANGED - * - * The message is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO - * Sent when the DC_RT_STATE changes but the time - * between these messages must not be less than the - * value set by RIL_REQUEST_SET_DC_RT_RATE. - * - * "data" is the most recent RIL_DcRtInfo - * - */ -#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041 - -/** - * RIL_UNSOL_RADIO_CAPABILITY - * - * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes. - * Returns the phone radio capability exactly as - * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the - * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY. - * - * "data" is the RIL_RadioCapability structure - */ -#define RIL_UNSOL_RADIO_CAPABILITY 1042 - -/* - * RIL_UNSOL_ON_SS - * - * Called when SS response is received when DIAL/USSD/SS is changed to SS by - * call control. - * - * "data" is const RIL_StkCcUnsolSsResponse * - * - */ -#define RIL_UNSOL_ON_SS 1043 - -/** - * RIL_UNSOL_STK_CC_ALPHA_NOTIFY - * - * Called when there is an ALPHA from UICC during Call Control. - * - * "data" is const char * containing ALPHA string from UICC in UTF-8 format. - * - */ -#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044 - - /** - * RIL_UNSOL_LCEDATA_RECV - * - * Called when there is an incoming Link Capacity Estimate (LCE) info report. - * - * "data" is the RIL_LceDataInfo structure. - * - */ -#define RIL_UNSOL_LCEDATA_RECV 1045 - -/* SAMSUNG RESPONSE */ -#define SAMSUNG_UNSOL_RESPONSE_BASE 11000 - -#define RIL_UNSOL_RELEASE_COMPLETE_MESSAGE 11001 -#define RIL_UNSOL_STK_SEND_SMS_RESULT 11002 -#define RIL_UNSOL_STK_CALL_CONTROL_RESULT 11003 -#define RIL_UNSOL_DUN_CALL_STATUS 11004 - -#define RIL_UNSOL_O2_HOME_ZONE_INFO 11007 -#define RIL_UNSOL_DEVICE_READY_NOTI 11008 -#define RIL_UNSOL_GPS_NOTI 11009 -#define RIL_UNSOL_AM 11010 -#define RIL_UNSOL_DUN_PIN_CONTROL_SIGNAL 11011 -#define RIL_UNSOL_DATA_SUSPEND_RESUME 11012 -#define RIL_UNSOL_SAP 11013 - -#define RIL_UNSOL_SIM_SMS_STORAGE_AVAILALE 11015 -#define RIL_UNSOL_HSDPA_STATE_CHANGED 11016 -#define RIL_UNSOL_WB_AMR_STATE 11017 -#define RIL_UNSOL_TWO_MIC_STATE 11018 -#define RIL_UNSOL_DHA_STATE 11019 -#define RIL_UNSOL_UART 11020 -#define RIL_UNSOL_RESPONSE_HANDOVER 11021 -#define RIL_UNSOL_IPV6_ADDR 11022 -#define RIL_UNSOL_NWK_INIT_DISC_REQUEST 11023 -#define RIL_UNSOL_RTS_INDICATION 11024 -#define RIL_UNSOL_OMADM_SEND_DATA 11025 -#define RIL_UNSOL_DUN 11026 -#define RIL_UNSOL_SYSTEM_REBOOT 11027 -#define RIL_UNSOL_VOICE_PRIVACY_CHANGED 11028 -#define RIL_UNSOL_UTS_GETSMSCOUNT 11029 -#define RIL_UNSOL_UTS_GETSMSMSG 11030 -#define RIL_UNSOL_UTS_GET_UNREAD_SMS_STATUS 11031 -#define RIL_UNSOL_MIP_CONNECT_STATUS 11032 - -/***********************************************************************/ - - -#if defined(ANDROID_MULTI_SIM) -/** - * RIL_Request Function pointer - * - * @param request is one of RIL_REQUEST_* - * @param data is pointer to data defined for that RIL_REQUEST_* - * data is owned by caller, and should not be modified or freed by callee - * @param t should be used in subsequent call to RIL_onResponse - * @param datalen the length of data - * - */ -typedef void (*RIL_RequestFunc) (int request, void *data, - size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id); - -/** - * This function should return the current radio state synchronously - */ -typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id); - -#else -/* Backward compatible */ - -/** - * RIL_Request Function pointer - * - * @param request is one of RIL_REQUEST_* - * @param data is pointer to data defined for that RIL_REQUEST_* - * data is owned by caller, and should not be modified or freed by callee - * @param t should be used in subsequent call to RIL_onResponse - * @param datalen the length of data - * - */ -typedef void (*RIL_RequestFunc) (int request, void *data, - size_t datalen, RIL_Token t); - -/** - * This function should return the current radio state synchronously - */ -typedef RIL_RadioState (*RIL_RadioStateRequest)(); - -#endif - - -/** - * This function returns "1" if the specified RIL_REQUEST code is - * supported and 0 if it is not - * - * @param requestCode is one of RIL_REQUEST codes - */ - -typedef int (*RIL_Supports)(int requestCode); - -/** - * This function is called from a separate thread--not the - * thread that calls RIL_RequestFunc--and indicates that a pending - * request should be cancelled. - * - * On cancel, the callee should do its best to abandon the request and - * call RIL_onRequestComplete with RIL_Errno CANCELLED at some later point. - * - * Subsequent calls to RIL_onRequestComplete for this request with - * other results will be tolerated but ignored. (That is, it is valid - * to ignore the cancellation request) - * - * RIL_Cancel calls should return immediately, and not wait for cancellation - * - * Please see ITU v.250 5.6.1 for how one might implement this on a TS 27.007 - * interface - * - * @param t token wants to be canceled - */ - -typedef void (*RIL_Cancel)(RIL_Token t); - -typedef void (*RIL_TimedCallback) (void *param); - -/** - * Return a version string for your RIL implementation - */ -typedef const char * (*RIL_GetVersion) (void); - -typedef struct { - int version; /* set to RIL_VERSION */ - RIL_RequestFunc onRequest; - RIL_RadioStateRequest onStateRequest; - RIL_Supports supports; - RIL_Cancel onCancel; - RIL_GetVersion getVersion; -} RIL_RadioFunctions; - -typedef struct { - char *apn; - char *protocol; - int authtype; - char *username; - char *password; -} RIL_InitialAttachApn; - -typedef struct { - int authContext; /* P2 value of authentication command, see P2 parameter in - 3GPP TS 31.102 7.1.2 */ - char *authData; /* the challenge string in Base64 format, see 3GPP - TS 31.102 7.1.2 */ - char *aid; /* AID value, See ETSI 102.221 8.1 and 101.220 4, - NULL if no value. */ -} RIL_SimAuthentication; - -#ifdef RIL_SHLIB -struct RIL_Env { - /** - * "t" is parameter passed in on previous call to RIL_Notification - * routine. - * - * If "e" != SUCCESS, then response can be null/is ignored - * - * "response" is owned by caller, and should not be modified or - * freed by callee - * - * RIL_onRequestComplete will return as soon as possible - */ - void (*OnRequestComplete)(RIL_Token t, RIL_Errno e, - void *response, size_t responselen); - -#if defined(ANDROID_MULTI_SIM) - /** - * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* - * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* - * - * "data" is owned by caller, and should not be modified or freed by callee - */ - void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id); -#else - /** - * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* - * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* - * - * "data" is owned by caller, and should not be modified or freed by callee - */ - void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen); -#endif - /** - * Call user-specifed "callback" function on on the same thread that - * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies - * a relative time value at which the callback is invoked. If relativeTime is - * NULL or points to a 0-filled structure, the callback will be invoked as - * soon as possible - */ - - void (*RequestTimedCallback) (RIL_TimedCallback callback, - void *param, const struct timeval *relativeTime); -}; - - -/** - * RIL implementations must defined RIL_Init - * argc and argv will be command line arguments intended for the RIL implementation - * Return NULL on error - * - * @param env is environment point defined as RIL_Env - * @param argc number of arguments - * @param argv list fo arguments - * - */ -const RIL_RadioFunctions *RIL_Init(const struct RIL_Env *env, int argc, char **argv); - -#else /* RIL_SHLIB */ - -/** - * Call this once at startup to register notification routine - * - * @param callbacks user-specifed callback function - */ -void RIL_register (const RIL_RadioFunctions *callbacks); - - -/** - * - * RIL_onRequestComplete will return as soon as possible - * - * @param t is parameter passed in on previous call to RIL_Notification - * routine. - * @param e error code - * if "e" != SUCCESS, then response can be null/is ignored - * @param response is owned by caller, and should not be modified or - * freed by callee - * @param responselen the length of response in byte - */ -void RIL_onRequestComplete(RIL_Token t, RIL_Errno e, - void *response, size_t responselen); - -#if defined(ANDROID_MULTI_SIM) -/** - * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* - * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* - * "data" is owned by caller, and should not be modified or freed by callee - * @param datalen the length of data in byte - */ - -void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, - size_t datalen, RIL_SOCKET_ID socket_id); -#else -/** - * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* - * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* - * "data" is owned by caller, and should not be modified or freed by callee - * @param datalen the length of data in byte - */ - -void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, - size_t datalen); -#endif - -/** - * Call user-specifed "callback" function on on the same thread that - * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies - * a relative time value at which the callback is invoked. If relativeTime is - * NULL or points to a 0-filled structure, the callback will be invoked as - * soon as possible - * - * @param callback user-specifed callback function - * @param param parameter list - * @param relativeTime a relative time value at which the callback is invoked - */ - -void RIL_requestTimedCallback (RIL_TimedCallback callback, - void *param, const struct timeval *relativeTime); - - -#endif /* RIL_SHLIB */ - -#ifdef __cplusplus -} -#endif - -#endif /*ANDROID_RIL_H*/ diff --git a/selinux/device.te b/selinux/device.te new file mode 100644 index 0000000..c95050b --- /dev/null +++ b/selinux/device.te @@ -0,0 +1,4 @@ +type mali_device, dev_type, mlstrustedobject; +type rfkill_device, dev_type; +type diagnostic_device, dev_type; +type efs_block_device, dev_type; diff --git a/selinux/dhcp.te b/selinux/dhcp.te new file mode 100755 index 0000000..c403b9b --- /dev/null +++ b/selinux/dhcp.te @@ -0,0 +1 @@ +allow dhcp self:rawip_socket { create write setopt }; diff --git a/selinux/domain.te b/selinux/domain.te new file mode 100644 index 0000000..1be0633 --- /dev/null +++ b/selinux/domain.te @@ -0,0 +1,4 @@ +## /dev/mali, /dev/ump +allow domain mali_device:chr_file rw_file_perms; + + diff --git a/selinux/file.te b/selinux/file.te new file mode 100644 index 0000000..185b1c2 --- /dev/null +++ b/selinux/file.te @@ -0,0 +1,9 @@ +type radio_efs_file, fs_type; + +type firmware_mfc, file_type; +type firmware_camera, file_type; + +type qmuxd_socket, file_type; +type kickstart_data_file, file_type, data_file_type; +type sensors_data_file, file_type, data_file_type; +type volume_data_file, file_type, data_file_type; diff --git a/selinux/file_contexts b/selinux/file_contexts new file mode 100644 index 0000000..36dc14c --- /dev/null +++ b/selinux/file_contexts @@ -0,0 +1,70 @@ +# GFX +/dev/mali u:object_r:mali_device:s0 +/dev/ump u:object_r:mali_device:s0 +/dev/fimg2d u:object_r:mali_device:s0 + +# RIL +/dev/mdm u:object_r:radio_device:s0 +/dev/hsicctl[0-3]* u:object_r:radio_device:s0 +/dev/ttyUSB0 u:object_r:radio_device:s0 +/dev/diag u:object_r:diagnostic_device:s0 + +# GPS +/dev/ttySAC1 u:object_r:gps_device:s0 + +# Bluetooth +/dev/ttySAC0 u:object_r:hci_attach_dev:s0 +/efs/bluetooth(/.*)? u:object_r:bluetooth_data_file:s0 + +# Sensors +/dev/akm8975 u:object_r:sensors_device:s0 +/efs/gyro_cal_data u:object_r:sensors_data_file:s0 + +# Camera +/data/ISP_CV u:object_r:camera_data_file:s0 +/dev/exynos-mem u:object_r:video_device:s0 + +# for wpa_supp +/dev/rfkill u:object_r:rfkill_device:s0 + +# Firmwares +/system/vendor/firmware(/.*)? u:object_r:firmware_camera:s0 +/system/vendor/firmware/mfc_fw.bin u:object_r:firmware_mfc:s0 +/system/vendor/firmware/fimc_is_fw.bin u:object_r:firmware_camera:s0 +/data/cfw(/.*)? u:object_r:firmware_camera:s0 +/tombstones u:object_r:system_data_file:s0 +/tombstones(/.*)? u:object_r:tombstone_data_file:s0 +/tombstones/qcks(/.*)? u:object_r:kickstart_data_file:s0 + +# Vibrator +/dev/tspdrv u:object_r:input_device:s0 + +# Wifi +/efs/wifi/.mac.info u:object_r:wifi_data_file:s0 + +# Sec-ril +/efs/FactoryApp/keystr u:object_r:efs_file:s0 +/efs/FactoryApp/factorymode u:object_r:efs_file:s0 +/efs/FactoryApp/serial_no u:object_r:efs_file:s0 +/data/misc/radio/ramdumpmode.txt u:object_r:radio_data_file:s0 +/data/misc/radio/dlnk u:object_r:radio_data_file:s0 + +# Binaries +/system/bin/qmuxd u:object_r:qmux_exec:s0 +/system/bin/efsks u:object_r:kickstart_exec:s0 +/system/bin/ks u:object_r:kickstart_exec:s0 +/system/bin/qcks u:object_r:kickstart_exec:s0 + +# Sockets +/dev/socket/qmux_audio(/.*)? u:object_r:qmuxd_socket:s0 +/dev/socket/qmux_bluetooth(/.*)? u:object_r:qmuxd_socket:s0 +/dev/socket/qmux_gps(/.*)? u:object_r:qmuxd_socket:s0 +/dev/socket/qmux_radio(/.*)? u:object_r:qmuxd_socket:s0 + +# Block devices +/dev/block/mmcblk0p[3-6]* u:object_r:efs_block_device:s0 +/dev/block/mmcblk0p10 u:object_r:efs_block_device:s0 +/dev/block/mmcblk0p11 u:object_r:efs_block_device:s0 + +# Audio related +/data/local/audio(/.*)? u:object_r:volume_data_file:s0 diff --git a/selinux/init.te b/selinux/init.te new file mode 100644 index 0000000..2f29889 --- /dev/null +++ b/selinux/init.te @@ -0,0 +1,3 @@ +allow init wpa_socket:unix_dgram_socket { bind create }; + + diff --git a/selinux/kickstart.te b/selinux/kickstart.te new file mode 100755 index 0000000..14e1ad5 --- /dev/null +++ b/selinux/kickstart.te @@ -0,0 +1,44 @@ +# kickstart processes and scripts +type kickstart, domain; +type kickstart_exec, exec_type, file_type; + +# kickstart_checker.sh talks to init over the property socket +unix_socket_connect(kickstart, property, init) + +# Start /system/bin/qcks from init +init_daemon_domain(kickstart) + +# Spawn /system/bin/efsks and /system/bin/ks +allow kickstart kickstart_exec:file { open execute_no_trans getattr }; + +# Run dd on m9kefs[123] block devices; write to /data/qcks/ +# Run cat on firmware and m9kefs[123] data; write to /data/qcks/ +allow kickstart efs_block_device:blk_file rw_file_perms; +allow kickstart kickstart_data_file:file create_file_perms; +allow kickstart kickstart_data_file:dir rw_dir_perms; +allow kickstart radio_efs_file:file r_file_perms; +allow kickstart radio_efs_file:dir search; + +# Let qcks access /dev/mdm node (modem driver) +allow kickstart radio_device:chr_file rw_file_perms; + +# Allow /dev/ttyUSB0 access +allow kickstart radio_device:chr_file { write ioctl getattr }; + +# Allow to run toolbox commands +allow kickstart shell_exec:file rx_file_perms; +# Toolbox commands for firmware dd +allow kickstart system_file:file execute_no_trans; + +# Access to /dev/block/platform/msm_sdcc.1/by-name/m9kefs2 +allow kickstart block_device:dir { getattr write search }; + +# Set system property key +allow kickstart radio_prop:property_service set; + +allow kickstart shell_exec:file entrypoint; +# ls on /data/qcks/ +allow kickstart self:capability { dac_override setuid }; + +# XXX Label sysfs files with a specific type? +allow kickstart sysfs:file rw_file_perms; \ No newline at end of file diff --git a/selinux/mediaserver.te b/selinux/mediaserver.te new file mode 100644 index 0000000..35dce7b --- /dev/null +++ b/selinux/mediaserver.te @@ -0,0 +1,8 @@ +qmux_socket(mediaserver) +allow mediaserver self:socket create_socket_perms; +allow mediaserver { firmware_camera }:file r_file_perms; +allow mediaserver firmware_camera:dir r_dir_perms; +allow mediaserver camera_data_file:file rw_file_perms; + +# Bluetooth audio +allow mediaserver bluetooth:unix_stream_socket { connectto }; diff --git a/selinux/netmgrd.te b/selinux/netmgrd.te new file mode 100755 index 0000000..11159a4 --- /dev/null +++ b/selinux/netmgrd.te @@ -0,0 +1,29 @@ +# Network utilities (radio process) +type netmgrd, domain; +type netmgrd_exec, exec_type, file_type; + +# Started by init +init_daemon_domain(netmgrd) + +allow netmgrd self:udp_socket { create ioctl }; +# fsetid, dac_override unlink on /dev/socket/qmux_radio/qmux_client_socket +allow netmgrd self:capability { sys_module fsetid setuid setgid net_admin net_raw dac_override }; +allow netmgrd self:packet_socket { write bind read create }; +allow netmgrd self:netlink_socket { write read create bind setopt }; +allow netmgrd self:netlink_route_socket { create bind read write nlmsg_read nlmsg_write setopt getattr }; +allow netmgrd kernel:system module_request; + +# Talk to qmuxd +qmux_socket(netmgrd) + +# Allow logging diagnostic items +allow netmgrd diagnostic_device:chr_file rw_file_perms; + +# /data/data_test/ access with shell +allow netmgrd shell_exec:file { execute read open execute_no_trans }; +allow netmgrd system_file:file { execute_no_trans }; + +# Talk to init over the property socket +unix_socket_connect(netmgrd, property, init) +# Set net.rmnet_usb0. values +allow netmgrd radio_prop:property_service set; diff --git a/selinux/qmux.te b/selinux/qmux.te new file mode 100755 index 0000000..e2a5bbf --- /dev/null +++ b/selinux/qmux.te @@ -0,0 +1,21 @@ +# Qualcomm Management Interface Multiplexer +type qmux, domain; +type qmux_exec, exec_type, file_type; + +# Started by init +init_daemon_domain(qmux) + +# Create local qmux_connect_socket +allow qmux qmuxd_socket:dir w_dir_perms; +allow qmux qmuxd_socket:sock_file { create setattr getattr unlink }; + +# /dev/hsicctl* node access +allow qmux radio_device:chr_file rw_file_perms; + +# Allow logging diagnostic items +allow qmux diagnostic_device:chr_file rw_file_perms; + +allow qmux self:capability { dac_override setuid }; + +# XXX Should we label with own type +allow qmux sysfs:file { open write append read getattr }; diff --git a/selinux/rild.te b/selinux/rild.te new file mode 100755 index 0000000..04209b0 --- /dev/null +++ b/selinux/rild.te @@ -0,0 +1,14 @@ +## RIL +allow rild radio_device:chr_file rw_file_perms; +allow rild { efs_file }:file rw_file_perms; +allow rild self:netlink_socket { create bind read write }; +allow rild self:netlink_route_socket { write }; + +# Talk to qmuxd +qmux_socket(rild) + +# Allow logging diagnostic items +allow rild diagnostic_device:chr_file rw_file_perms; + +# XXX label with own type? +allow rild sysfs:file { read open write getattr }; diff --git a/selinux/secril.te b/selinux/secril.te new file mode 100644 index 0000000..7761d80 --- /dev/null +++ b/selinux/secril.te @@ -0,0 +1,25 @@ +# sec-ril +type secril-daemon, domain; +type secril-daemon_exec, exec_type, file_type; + +# Start /system/bin/sec-ril from init +init_daemon_domain(secril-daemon) + +allow secril-daemon secril-daemon_exec:file { open execute_no_trans getattr }; +allow secril-daemon self:udp_socket { create ioctl }; +unix_socket_connect(secril-daemon, property, init) +unix_socket_connect(secril-daemon, rild, rild) + +allow secril-daemon { efs_file }:file rw_file_perms; +allow secril-daemon system_data_file:dir create_dir_perms; +allow secril-daemon system_data_file:file unlink; +allow secril-daemon radio_data_file:file { create_file_perms }; +allow secril-daemon kernel:system module_request; +allow secril-daemon self:capability { sys_module fsetid setuid setgid net_admin net_raw dac_override }; +allow secril-daemon system_file:file x_file_perms; +allow secril-daemon sysfs:file rw_file_perms; +allow secril-daemon shell_exec:file rx_file_perms; +allow secril-daemon app_data_file:file rw_file_perms; +allow secril-daemon app_data_file:dir search; +allow secril-daemon zygote_exec:file rx_file_perms; +allow secril-daemon ashmem_device:chr_file x_file_perms; \ No newline at end of file diff --git a/selinux/system.te b/selinux/system.te new file mode 100755 index 0000000..bc8212b --- /dev/null +++ b/selinux/system.te @@ -0,0 +1,12 @@ +# Talk to qmuxd +qmux_socket(system) + +allow system diagnostic_device:chr_file rw_file_perms; +allow system sensors_device:chr_file { read open }; +allow system sensors_data_file:file r_file_perms; +allow system wpa_socket:unix_dgram_socket sendto; +allow system_app volume_data_file:file { read write open getattr }; + +allow system sysfs:file { read open write }; +allow system self:capability { sys_module }; + diff --git a/selinux/te_macros b/selinux/te_macros new file mode 100755 index 0000000..274fd55 --- /dev/null +++ b/selinux/te_macros @@ -0,0 +1,12 @@ +##################################### +# qmux_socket(clientdomain) +# Allow client to send via a local +# socket to the qmux domain. +define(`qmux_socket', ` +type $1_qmuxd_socket, file_type; +file_type_auto_trans($1, qmuxd_socket, $1_qmuxd_socket) +unix_socket_connect($1, qmuxd, qmux) +allow qmux $1_qmuxd_socket:sock_file { getattr unlink }; +') + + diff --git a/selinux/ueventd.te b/selinux/ueventd.te new file mode 100644 index 0000000..fd1852b --- /dev/null +++ b/selinux/ueventd.te @@ -0,0 +1,11 @@ +# Drivers read firmware files /firmware/image +allow ueventd { radio_efs_file }:file r_file_perms; +allow ueventd { radio_efs_file }:dir search; + +# MFC firmware +allow ueventd { firmware_mfc }:file r_file_perms; + +# Camera related firmwares +allow ueventd { firmware_camera }:dir search; +allow ueventd { firmware_camera }:file r_file_perms; + diff --git a/selinux/wpa_supplicant.te b/selinux/wpa_supplicant.te new file mode 100755 index 0000000..ab5fb24 --- /dev/null +++ b/selinux/wpa_supplicant.te @@ -0,0 +1,10 @@ +allow wpa init:unix_dgram_socket { read write }; + +# logwrapper used with wpa_supplicant +allow wpa devpts:chr_file { read write }; + +allow wpa wpa_socket:unix_dgram_socket { read write }; +allow wpa_socket system:unix_dgram_socket sendto; + +allow wpa_socket wifi_data_file:sock_file unlink; +allow wpa rfkill_device:chr_file rw_file_perms; \ No newline at end of file -- cgit v1.1