From 4fbefae1a4692cd107f13ad84f9540ddc9fc0cdc Mon Sep 17 00:00:00 2001 From: RGIB Date: Sat, 14 Mar 2015 21:02:10 +0100 Subject: n5100: fix ril and gps Change-Id: Ib73dbb04c9fd3d778ef094e354bb4ce871e30a4a --- include/hardware/gps.h | 1097 ++++++++++++++++++++++++++++++++++++++++++----- include/telephony/ril.h | 858 +++++++++++++++++++++++++++++++++--- 2 files changed, 1775 insertions(+), 180 deletions(-) (limited to 'include') diff --git a/include/hardware/gps.h b/include/hardware/gps.h index f149e98..59da5dd 100644 --- a/include/hardware/gps.h +++ b/include/hardware/gps.h @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include @@ -38,6 +40,9 @@ typedef int64_t GpsUtcTime; /** Maximum number of SVs for gps_sv_status_callback(). */ #define GPS_MAX_SVS 32 +/** Maximum number of Measurements in gps_measurement_callback(). */ +#define GPS_MAX_MEASUREMENT 32 + /** Requested operational mode for GPS operation. */ typedef uint32_t GpsPositionMode; // IMPORTANT: Note that the following values must match @@ -103,25 +108,47 @@ typedef uint16_t GpsLocationFlags; #define GPS_CAPABILITY_SINGLE_SHOT 0x0000008 /** GPS supports on demand time injection */ #define GPS_CAPABILITY_ON_DEMAND_TIME 0x0000010 +/** GPS supports Geofencing */ +#define GPS_CAPABILITY_GEOFENCING 0x0000020 +/** GPS supports Measurements */ +#define GPS_CAPABILITY_MEASUREMENTS 0x0000040 +/** GPS supports Navigation Messages */ +#define GPS_CAPABILITY_NAV_MESSAGES 0x0000080 /** Flags used to specify which aiding data to delete when calling delete_aiding_data(). */ -typedef uint16_t GpsAidingData; +typedef uint32_t GpsAidingData; // IMPORTANT: Note that the following values must match // constants in GpsLocationProvider.java. -#define GPS_DELETE_EPHEMERIS 0x0001 -#define GPS_DELETE_ALMANAC 0x0002 -#define GPS_DELETE_POSITION 0x0004 -#define GPS_DELETE_TIME 0x0008 -#define GPS_DELETE_IONO 0x0010 -#define GPS_DELETE_UTC 0x0020 -#define GPS_DELETE_HEALTH 0x0040 -#define GPS_DELETE_SVDIR 0x0080 -#define GPS_DELETE_SVSTEER 0x0100 -#define GPS_DELETE_SADATA 0x0200 -#define GPS_DELETE_RTI 0x0400 -#define GPS_DELETE_CELLDB_INFO 0x8000 -#define GPS_DELETE_ALL 0xFFFF +#define GPS_DELETE_EPHEMERIS 0x00000001 +#define GPS_DELETE_ALMANAC 0x00000002 +#define GPS_DELETE_POSITION 0x00000004 +#define GPS_DELETE_TIME 0x00000008 +#define GPS_DELETE_IONO 0x00000010 +#define GPS_DELETE_UTC 0x00000020 +#define GPS_DELETE_HEALTH 0x00000040 +#define GPS_DELETE_SVDIR 0x00000080 +#define GPS_DELETE_SVSTEER 0x00000100 +#define GPS_DELETE_SADATA 0x00000200 +#define GPS_DELETE_RTI 0x00000400 +#define GPS_DELETE_CELLDB_INFO 0x00000800 +#define GPS_DELETE_ALMANAC_CORR 0x00001000 +#define GPS_DELETE_FREQ_BIAS_EST 0x00002000 +#define GLO_DELETE_EPHEMERIS 0x00004000 +#define GLO_DELETE_ALMANAC 0x00008000 +#define GLO_DELETE_SVDIR 0x00010000 +#define GLO_DELETE_SVSTEER 0x00020000 +#define GLO_DELETE_ALMANAC_CORR 0x00040000 +#define GPS_DELETE_TIME_GPS 0x00080000 +#define GLO_DELETE_TIME 0x00100000 +#define BDS_DELETE_SVDIR 0X00200000 +#define BDS_DELETE_SVSTEER 0X00400000 +#define BDS_DELETE_TIME 0X00800000 +#define BDS_DELETE_ALMANAC_CORR 0X01000000 +#define BDS_DELETE_EPHEMERIS 0X02000000 +#define BDS_DELETE_ALMANAC 0X04000000 + +#define GPS_DELETE_ALL 0xFFFFFFFF /** AGPS type */ typedef uint16_t AGpsType; @@ -133,6 +160,12 @@ typedef uint16_t AGpsSetIDType; #define AGPS_SETID_TYPE_IMSI 1 #define AGPS_SETID_TYPE_MSISDN 2 +typedef uint16_t ApnIpType; +#define APN_IP_INVALID 0 +#define APN_IP_IPV4 1 +#define APN_IP_IPV6 2 +#define APN_IP_IPV4V6 3 + /** * String length constants */ @@ -204,6 +237,137 @@ typedef uint16_t AGpsStatusValue; #define AGPS_RIL_NETWORK_TTYPE_WIMAX 6 /** + * Flags to indicate what fields in GpsClock are valid. + */ +typedef uint16_t GpsClockFlags; +/** A valid 'leap second' is stored in the data structure. */ +#define GPS_CLOCK_HAS_LEAP_SECOND (1<<0) +/** A valid 'time uncertainty' is stored in the data structure. */ +#define GPS_CLOCK_HAS_TIME_UNCERTAINTY (1<<1) +/** A valid 'full bias' is stored in the data structure. */ +#define GPS_CLOCK_HAS_FULL_BIAS (1<<2) +/** A valid 'bias' is stored in the data structure. */ +#define GPS_CLOCK_HAS_BIAS (1<<3) +/** A valid 'bias uncertainty' is stored in the data structure. */ +#define GPS_CLOCK_HAS_BIAS_UNCERTAINTY (1<<4) +/** A valid 'drift' is stored in the data structure. */ +#define GPS_CLOCK_HAS_DRIFT (1<<5) +/** A valid 'drift uncertainty' is stored in the data structure. */ +#define GPS_CLOCK_HAS_DRIFT_UNCERTAINTY (1<<6) + +/** + * Enumeration of the available values for the GPS Clock type. + */ +typedef uint8_t GpsClockType; +/** The type is not available ot it is unknown. */ +#define GPS_CLOCK_TYPE_UNKNOWN 0 +/** The source of the time value reported by GPS clock is the local hardware clock. */ +#define GPS_CLOCK_TYPE_LOCAL_HW_TIME 1 +/** + * The source of the time value reported by GPS clock is the GPS time derived from satellites + * (epoch = Jan 6, 1980) + */ +#define GPS_CLOCK_TYPE_GPS_TIME 2 + +/** + * Flags to indicate what fields in GpsMeasurement are valid. + */ +typedef uint32_t GpsMeasurementFlags; +/** A valid 'snr' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_SNR (1<<0) +/** A valid 'elevation' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_ELEVATION (1<<1) +/** A valid 'elevation uncertainty' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_ELEVATION_UNCERTAINTY (1<<2) +/** A valid 'azimuth' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_AZIMUTH (1<<3) +/** A valid 'azimuth uncertainty' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_AZIMUTH_UNCERTAINTY (1<<4) +/** A valid 'pseudorange' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_PSEUDORANGE (1<<5) +/** A valid 'pseudorange uncertainty' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_PSEUDORANGE_UNCERTAINTY (1<<6) +/** A valid 'code phase' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_CODE_PHASE (1<<7) +/** A valid 'code phase uncertainty' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_CODE_PHASE_UNCERTAINTY (1<<8) +/** A valid 'carrier frequency' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_CARRIER_FREQUENCY (1<<9) +/** A valid 'carrier cycles' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_CARRIER_CYCLES (1<<10) +/** A valid 'carrier phase' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_CARRIER_PHASE (1<<11) +/** A valid 'carrier phase uncertainty' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_CARRIER_PHASE_UNCERTAINTY (1<<12) +/** A valid 'bit number' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_BIT_NUMBER (1<<13) +/** A valid 'time from last bit' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_TIME_FROM_LAST_BIT (1<<14) +/** A valid 'doppler shift' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_DOPPLER_SHIFT (1<<15) +/** A valid 'doppler shift uncertainty' is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_DOPPLER_SHIFT_UNCERTAINTY (1<<16) +/** A valid 'used in fix' flag is stored in the data structure. */ +#define GPS_MEASUREMENT_HAS_USED_IN_FIX (1<<17) + +/** + * Enumeration of the available values for the GPS Measurement's loss of lock. + */ +typedef uint8_t GpsLossOfLock; +/** The indicator is not available or it is unknown. */ +#define GPS_LOSS_OF_LOCK_UNKNOWN 0 +/** The measurement does not present any indication of loss of lock. */ +#define GPS_LOSS_OF_LOCK_OK 1 +/** Loss of lock between previous and current observation: cycle slip possible. */ +#define GPS_LOSS_OF_LOCK_CYCLE_SLIP 2 + +/** + * Enumeration of available values for the GPS Measurement's multipath indicator. + */ +typedef uint8_t GpsMultipathIndicator; +/** The indicator is not available or unknown. */ +#define GPS_MULTIPATH_INDICATOR_UNKNOWN 0 +/** The measurement has been indicated to use multipath. */ +#define GPS_MULTIPATH_INDICATOR_DETECTED 1 +/** The measurement has been indicated Not to use multipath. */ +#define GPS_MULTIPATH_INDICATOR_NOT_USED 2 + +/** + * Flags indicating the GPS measurement state. + */ +typedef uint16_t GpsMeasurementState; +#define GPS_MEASUREMENT_STATE_UNKNOWN 0 +#define GPS_MEASUREMENT_STATE_CODE_LOCK (1<<0) +#define GPS_MEASUREMENT_STATE_BIT_SYNC (1<<1) +#define GPS_MEASUREMENT_STATE_SUBFRAME_SYNC (1<<2) +#define GPS_MEASUREMENT_STATE_TOW_DECODED (1<<3) + +/** + * Flags indicating the Accumulated Delta Range's states. + */ +typedef uint16_t GpsAccumulatedDeltaRangeState; +#define GPS_ADR_STATE_UNKNOWN 0 +#define GPS_ADR_STATE_VALID (1<<0) +#define GPS_ADR_STATE_RESET (1<<1) +#define GPS_ADR_STATE_CYCLE_SLIP (1<<2) + +/** + * Enumeration of available values to indicate the available GPS Natigation message types. + */ +typedef uint8_t GpsNavigationMessageType; +/** The message type is unknown. */ +#define GPS_NAVIGATION_MESSAGE_TYPE_UNKNOWN 0 +/** L1 C/A message contained in the structure. */ +#define GPS_NAVIGATION_MESSAGE_TYPE_L1CA 1 +/** L2-CNAV message contained in the structure. */ +#define GPS_NAVIGATION_MESSAGE_TYPE_L2CNAV 2 +/** L5-CNAV message contained in the structure. */ +#define GPS_NAVIGATION_MESSAGE_TYPE_L5CNAV 3 +/** CNAV-2 message contained in the structure. */ +#define GPS_NAVIGATION_MESSAGE_TYPE_CNAV2 4 + + +/** * Name for the GPS XTRA interface. */ #define GPS_XTRA_INTERFACE "gps-xtra" @@ -219,6 +383,11 @@ typedef uint16_t AGpsStatusValue; #define AGPS_INTERFACE "agps" /** + * Name of the Supl Certificate interface. + */ +#define SUPL_CERTIFICATE_INTERFACE "supl-certificate" + +/** * Name for NI interface */ #define GPS_NI_INTERFACE "gps-ni" @@ -229,15 +398,26 @@ typedef uint16_t AGpsStatusValue; #define AGPS_RIL_INTERFACE "agps_ril" /** - * The GPS chipset can use Psc for AGPS. - */ -#define AGPS_USE_PSC - -/* * Name for the GPS_Geofencing interface. */ #define GPS_GEOFENCING_INTERFACE "gps_geofencing" +/** + * Name of the GPS Measurements interface. + */ +#define GPS_MEASUREMENT_INTERFACE "gps_measurement" + +/** + * Name of the GPS navigation message interface. + */ +#define GPS_NAVIGATION_MESSAGE_INTERFACE "gps_navigation_message" + +/** + * Name of the GNSS/GPS configuration interface. + */ +#define GNSS_CONFIGURATION_INTERFACE "gnss_configuration" + + /** Represents a location. */ typedef struct { /** set to sizeof(GpsLocation) */ @@ -280,13 +460,6 @@ typedef struct { float elevation; /** Azimuth of SV in degrees. */ float azimuth; - /** Unknown field in Samsung I9100 libgps - May be an indicator for constellation type - (GPS, GLONASS, Galileo)? - Used on GT-I9100, likely also present on GT-N7000, - SGH-I717, SGH-I727 but this needs confirmation. - */ - int unknown_samsung_field; } GpsSvInfo; /** Represents SV status. */ @@ -317,6 +490,7 @@ typedef struct { uint32_t used_in_fix_mask; } GpsSvStatus; + /* 2G and 3G */ /* In 3G lac is discarded */ typedef struct { @@ -324,9 +498,6 @@ typedef struct { uint16_t mcc; uint16_t mnc; uint16_t lac; -#ifdef AGPS_USE_PSC - uint16_t psc; -#endif uint32_t cid; } AGpsRefLocationCellID; @@ -353,8 +524,9 @@ typedef void (* gps_location_callback)(GpsLocation* location); */ typedef void (* gps_status_callback)(GpsStatus* status); -/** Callback with SV status information. - * Can only be called from a thread created by create_thread_cb. +/** + * Callback with SV status information. + * Can only be called from a thread created by create_thread_cb. */ typedef void (* gps_sv_status_callback)(GpsSvStatus* sv_info); @@ -406,7 +578,7 @@ typedef struct { size_t size; /** * Opens the interface and provides the callback routines - * to the implemenation of this interface. + * to the implementation of this interface. */ int (*init)( GpsCallbacks* callbacks ); @@ -467,7 +639,7 @@ typedef struct { size_t size; /** * Opens the XTRA interface and provides the callback routines - * to the implemenation of this interface. + * to the implementation of this interface. */ int (*init)( GpsXtraCallbacks* callbacks ); /** Injects XTRA data into the GPS. */ @@ -488,13 +660,45 @@ typedef struct { /** Represents the status of AGPS. */ typedef struct { - /** set to sizeof(AGpsStatus) */ + /** set to sizeof(AGpsStatus_v1) */ + size_t size; + + AGpsType type; + AGpsStatusValue status; +} AGpsStatus_v1; + +/** Represents the status of AGPS augmented with a IPv4 address field. */ +typedef struct { + /** set to sizeof(AGpsStatus_v2) */ size_t size; AGpsType type; AGpsStatusValue status; uint32_t ipaddr; -} AGpsStatus; +} AGpsStatus_v2; + +/* Represents the status of AGPS augmented to support IPv4 and IPv6. */ +typedef struct { + /** set to sizeof(AGpsStatus_v3) */ + size_t size; + + AGpsType type; + AGpsStatusValue status; + + /** + * Must be set to a valid IPv4 address if the field 'addr' contains an IPv4 + * address, or set to INADDR_NONE otherwise. + */ + uint32_t ipaddr; + + /** + * Must contain the IPv4 (AF_INET) or IPv6 (AF_INET6) address to report. + * Any other value of addr.ss_family will be rejected. + * */ + struct sockaddr_storage addr; +} AGpsStatus_v3; + +typedef AGpsStatus_v3 AGpsStatus; /** Callback with AGPS status information. * Can only be called from a thread created by create_thread_cb. @@ -510,16 +714,16 @@ typedef struct { /** Extended interface for AGPS support. */ typedef struct { - /** set to sizeof(AGpsInterface) */ + /** set to sizeof(AGpsInterface_v1) */ size_t size; /** * Opens the AGPS interface and provides the callback routines - * to the implemenation of this interface. + * to the implementation of this interface. */ void (*init)( AGpsCallbacks* callbacks ); /** - * Notifies that a data connection is available and sets + * Notifies that a data connection is available and sets * the name of the APN to be used for SUPL. */ int (*data_conn_open)( const char* apn ); @@ -528,15 +732,124 @@ typedef struct { */ int (*data_conn_closed)(); /** - * Notifies that a data connection is not available for AGPS. + * Notifies that a data connection is not available for AGPS. */ int (*data_conn_failed)(); /** * Sets the hostname and port for the AGPS server. */ int (*set_server)( AGpsType type, const char* hostname, int port ); -} AGpsInterface; +} AGpsInterface_v1; + +/** + * Extended interface for AGPS support, it is augmented to enable to pass + * extra APN data. + */ +typedef struct { + /** set to sizeof(AGpsInterface_v2) */ + size_t size; + + /** + * Opens the AGPS interface and provides the callback routines to the + * implementation of this interface. + */ + void (*init)(AGpsCallbacks* callbacks); + /** + * Deprecated. + * If the HAL supports AGpsInterface_v2 this API will not be used, see + * data_conn_open_with_apn_ip_type for more information. + */ + int (*data_conn_open)(const char* apn); + /** + * Notifies that the AGPS data connection has been closed. + */ + int (*data_conn_closed)(); + /** + * Notifies that a data connection is not available for AGPS. + */ + int (*data_conn_failed)(); + /** + * Sets the hostname and port for the AGPS server. + */ + int (*set_server)(AGpsType type, const char* hostname, int port); + + /** + * Notifies that a data connection is available and sets the name of the + * APN, and its IP type, to be used for SUPL connections. + */ + int (*data_conn_open_with_apn_ip_type)( + const char* apn, + ApnIpType apnIpType); +} AGpsInterface_v2; + +typedef AGpsInterface_v2 AGpsInterface; + +/** Error codes associated with certificate operations */ +#define AGPS_CERTIFICATE_OPERATION_SUCCESS 0 +#define AGPS_CERTIFICATE_ERROR_GENERIC -100 +#define AGPS_CERTIFICATE_ERROR_TOO_MANY_CERTIFICATES -101 + +/** A data structure that represents an X.509 certificate using DER encoding */ +typedef struct { + size_t length; + u_char* data; +} DerEncodedCertificate; + +/** + * A type definition for SHA1 Fingerprints used to identify X.509 Certificates + * The Fingerprint is a digest of the DER Certificate that uniquely identifies it. + */ +typedef struct { + u_char data[20]; +} Sha1CertificateFingerprint; +/** AGPS Interface to handle SUPL certificate operations */ +typedef struct { + /** set to sizeof(SuplCertificateInterface) */ + size_t size; + + /** + * Installs a set of Certificates used for SUPL connections to the AGPS server. + * If needed the HAL should find out internally any certificates that need to be removed to + * accommodate the certificates to install. + * The certificates installed represent a full set of valid certificates needed to connect to + * AGPS SUPL servers. + * The list of certificates is required, and all must be available at the same time, when trying + * to establish a connection with the AGPS Server. + * + * Parameters: + * certificates - A pointer to an array of DER encoded certificates that are need to be + * installed in the HAL. + * length - The number of certificates to install. + * Returns: + * AGPS_CERTIFICATE_OPERATION_SUCCESS if the operation is completed successfully + * AGPS_CERTIFICATE_ERROR_TOO_MANY_CERTIFICATES if the HAL cannot store the number of + * certificates attempted to be installed, the state of the certificates stored should + * remain the same as before on this error case. + * + * IMPORTANT: + * If needed the HAL should find out internally the set of certificates that need to be + * removed to accommodate the certificates to install. + */ + int (*install_certificates) ( const DerEncodedCertificate* certificates, size_t length ); + + /** + * Notifies the HAL that a list of certificates used for SUPL connections are revoked. It is + * expected that the given set of certificates is removed from the internal store of the HAL. + * + * Parameters: + * fingerprints - A pointer to an array of SHA1 Fingerprints to identify the set of + * certificates to revoke. + * length - The number of fingerprints provided. + * Returns: + * AGPS_CERTIFICATE_OPERATION_SUCCESS if the operation is completed successfully. + * + * IMPORTANT: + * If any of the certificates provided (through its fingerprint) is not known by the HAL, + * it should be ignored and continue revoking/deleting the rest of them. + */ + int (*revoke_certificates) ( const Sha1CertificateFingerprint* fingerprints, size_t length ); +} SuplCertificateInterface; /** Represents an NI request */ typedef struct { @@ -662,7 +975,7 @@ typedef struct { size_t size; /** * Opens the AGPS interface and provides the callback routines - * to the implemenation of this interface. + * to the implementation of this interface. */ void (*init)( AGpsRilCallbacks* callbacks ); @@ -692,6 +1005,7 @@ typedef struct { */ void (*update_network_availability) (int avaiable, const char* apn); } AGpsRilInterface; + /** * GPS Geofence. * There are 3 states associated with a Geofence: Inside, Outside, Unknown. @@ -778,28 +1092,29 @@ typedef struct { #define GPS_GEOFENCE_ERROR_ID_UNKNOWN -102 #define GPS_GEOFENCE_ERROR_INVALID_TRANSITION -103 #define GPS_GEOFENCE_ERROR_GENERIC -149 + /** -* The callback associated with the geofence. -* Parameters: -* geofence_id - The id associated with the add_geofence_area. -* location - The current GPS location. -* transition - Can be one of GPS_GEOFENCE_ENTERED, GPS_GEOFENCE_EXITED, -* GPS_GEOFENCE_UNCERTAIN. -* timestamp - Timestamp when the transition was detected. -* -* The callback should only be called when the caller is interested in that -* particular transition. For instance, if the caller is interested only in -* ENTERED transition, then the callback should NOT be called with the EXITED -* transition. -* -* IMPORTANT: If a transition is triggered resulting in this callback, the GPS -* subsystem will wake up the application processor, if its in suspend state. -*/ + * The callback associated with the geofence. + * Parameters: + * geofence_id - The id associated with the add_geofence_area. + * location - The current GPS location. + * transition - Can be one of GPS_GEOFENCE_ENTERED, GPS_GEOFENCE_EXITED, + * GPS_GEOFENCE_UNCERTAIN. + * timestamp - Timestamp when the transition was detected. + * + * The callback should only be called when the caller is interested in that + * particular transition. For instance, if the caller is interested only in + * ENTERED transition, then the callback should NOT be called with the EXITED + * transition. + * + * IMPORTANT: If a transition is triggered resulting in this callback, the GPS + * subsystem will wake up the application processor, if its in suspend state. + */ typedef void (*gps_geofence_transition_callback) (int32_t geofence_id, GpsLocation* location, -int32_t transition, GpsUtcTime timestamp); + int32_t transition, GpsUtcTime timestamp); /** - * The callback associated with the availablity of the GPS system for geofencing + * The callback associated with the availability of the GPS system for geofencing * monitoring. If the GPS system determines that it cannot monitor geofences * because of lack of reliability or unavailability of the GPS signals, it will * call this callback with GPS_GEOFENCE_UNAVAILABLE parameter. @@ -872,77 +1187,623 @@ typedef struct { /** Extended interface for GPS_Geofencing support */ typedef struct { - /** set to sizeof(GpsGeofencingInterface) */ - size_t size; + /** set to sizeof(GpsGeofencingInterface) */ + size_t size; + + /** + * Opens the geofence interface and provides the callback routines + * to the implementation of this interface. + */ + void (*init)( GpsGeofenceCallbacks* callbacks ); + + /** + * Add a geofence area. This api currently supports circular geofences. + * Parameters: + * geofence_id - The id for the geofence. If a geofence with this id + * already exists, an error value (GPS_GEOFENCE_ERROR_ID_EXISTS) + * should be returned. + * latitude, longtitude, radius_meters - The lat, long and radius + * (in meters) for the geofence + * last_transition - The current state of the geofence. For example, if + * the system already knows that the user is inside the geofence, + * this will be set to GPS_GEOFENCE_ENTERED. In most cases, it + * will be GPS_GEOFENCE_UNCERTAIN. + * monitor_transition - Which transitions to monitor. Bitwise OR of + * GPS_GEOFENCE_ENTERED, GPS_GEOFENCE_EXITED and + * GPS_GEOFENCE_UNCERTAIN. + * notification_responsiveness_ms - Defines the best-effort description + * of how soon should the callback be called when the transition + * associated with the Geofence is triggered. For instance, if set + * to 1000 millseconds with GPS_GEOFENCE_ENTERED, the callback + * should be called 1000 milliseconds within entering the geofence. + * This parameter is defined in milliseconds. + * NOTE: This is not to be confused with the rate that the GPS is + * polled at. It is acceptable to dynamically vary the rate of + * sampling the GPS for power-saving reasons; thus the rate of + * sampling may be faster or slower than this. + * unknown_timer_ms - The time limit after which the UNCERTAIN transition + * should be triggered. This parameter is defined in milliseconds. + * See above for a detailed explanation. + */ + void (*add_geofence_area) (int32_t geofence_id, double latitude, double longitude, + double radius_meters, int last_transition, int monitor_transitions, + int notification_responsiveness_ms, int unknown_timer_ms); + + /** + * Pause monitoring a particular geofence. + * Parameters: + * geofence_id - The id for the geofence. + */ + void (*pause_geofence) (int32_t geofence_id); + + /** + * Resume monitoring a particular geofence. + * Parameters: + * geofence_id - The id for the geofence. + * monitor_transitions - Which transitions to monitor. Bitwise OR of + * GPS_GEOFENCE_ENTERED, GPS_GEOFENCE_EXITED and + * GPS_GEOFENCE_UNCERTAIN. + * This supersedes the value associated provided in the + * add_geofence_area call. + */ + void (*resume_geofence) (int32_t geofence_id, int monitor_transitions); + + /** + * Remove a geofence area. After the function returns, no notifications + * should be sent. + * Parameter: + * geofence_id - The id for the geofence. + */ + void (*remove_geofence_area) (int32_t geofence_id); +} GpsGeofencingInterface; + + +/** + * Represents an estimate of the GPS clock time. + */ +typedef struct { + /** set to sizeof(GpsClock) */ + size_t size; + + /** A set of flags indicating the validity of the fields in this data structure. */ + GpsClockFlags flags; /** - * Opens the geofence interface and provides the callback routines - * to the implemenation of this interface. + * Leap second data. + * The sign of the value is defined by the following equation: + * utc_time_ns = time_ns + (full_bias_ns + bias_ns) - leap_second * 1,000,000,000 + * + * If the data is available 'flags' must contain GPS_CLOCK_HAS_LEAP_SECOND. */ - void (*init)( GpsGeofenceCallbacks* callbacks ); + int16_t leap_second; /** - * Add a geofence area. This api currently supports circular geofences. - * Parameters: - * geofence_id - The id for the geofence. If a geofence with this id - * already exists, an error value (GPS_GEOFENCE_ERROR_ID_EXISTS) - * should be returned. - * latitude, longtitude, radius_meters - The lat, long and radius - * (in meters) for the geofence - * last_transition - The current state of the geofence. For example, if - * the system already knows that the user is inside the geofence, - * this will be set to GPS_GEOFENCE_ENTERED. In most cases, it - * will be GPS_GEOFENCE_UNCERTAIN. - * monitor_transition - Which transitions to monitor. Bitwise OR of - * GPS_GEOFENCE_ENTERED, GPS_GEOFENCE_EXITED and - * GPS_GEOFENCE_UNCERTAIN. - * notification_responsiveness_ms - Defines the best-effort description - * of how soon should the callback be called when the transition - * associated with the Geofence is triggered. For instance, if set - * to 1000 millseconds with GPS_GEOFENCE_ENTERED, the callback - * should be called 1000 milliseconds within entering the geofence. - * This parameter is defined in milliseconds. - * NOTE: This is not to be confused with the rate that the GPS is - * polled at. It is acceptable to dynamically vary the rate of - * sampling the GPS for power-saving reasons; thus the rate of - * sampling may be faster or slower than this. - * unknown_timer_ms - The time limit after which the UNCERTAIN transition - * should be triggered. This paramter is defined in milliseconds. - * See above for a detailed explanation. - */ - void (*add_geofence_area) (int32_t geofence_id, double latitude, - double longitude, double radius_meters, - int last_transition, int monitor_transitions, - int notification_responsiveness_ms, - int unknown_timer_ms); - - /** - * Pause monitoring a particular geofence. - * Parameters: - * geofence_id - The id for the geofence. + * Indicates the type of time reported by the 'time_ns' field. + * This is a Mandatory field. */ - void (*pause_geofence) (int32_t geofence_id); + GpsClockType type; /** - * Resume monitoring a particular geofence. - * Parameters: - * geofence_id - The id for the geofence. - * monitor_transitions - Which transitions to monitor. Bitwise OR of - * GPS_GEOFENCE_ENTERED, GPS_GEOFENCE_EXITED and - * GPS_GEOFENCE_UNCERTAIN. - * This supersedes the value associated provided in the - * add_geofence_area call. + * The GPS receiver internal clock value. This can be either the local hardware clock value + * (GPS_CLOCK_TYPE_LOCAL_HW_TIME), or the current GPS time derived inside GPS receiver + * (GPS_CLOCK_TYPE_GPS_TIME). The field 'type' defines the time reported. + * + * For local hardware clock, this value is expected to be monotonically increasing during + * the reporting session. The real GPS time can be derived by compensating the 'full bias' + * (when it is available) from this value. + * + * For GPS time, this value is expected to be the best estimation of current GPS time that GPS + * receiver can achieve. Set the 'time uncertainty' appropriately when GPS time is specified. + * + * Sub-nanosecond accuracy can be provided by means of the 'bias' field. + * The value contains the 'time uncertainty' in it. + * + * This is a Mandatory field. */ - void (*resume_geofence) (int32_t geofence_id, int monitor_transitions); + int64_t time_ns; /** - * Remove a geofence area. After the function returns, no notifications - * should be sent. - * Parameter: - * geofence_id - The id for the geofence. + * 1-Sigma uncertainty associated with the clock's time in nanoseconds. + * The uncertainty is represented as an absolute (single sided) value. + * + * This value should be set if GPS_CLOCK_TYPE_GPS_TIME is set. + * If the data is available 'flags' must contain GPS_CLOCK_HAS_TIME_UNCERTAINTY. */ - void (*remove_geofence_area) (int32_t geofence_id); -} GpsGeofencingInterface; + double time_uncertainty_ns; + + /** + * The difference between hardware clock ('time' field) inside GPS receiver and the true GPS + * time since 0000Z, January 6, 1980, in nanoseconds. + * This value is used if and only if GPS_CLOCK_TYPE_LOCAL_HW_TIME is set, and GPS receiver + * has solved the clock for GPS time. + * The caller is responsible for using the 'bias uncertainty' field for quality check. + * + * The sign of the value is defined by the following equation: + * true time (GPS time) = time_ns + (full_bias_ns + bias_ns) + * + * This value contains the 'bias uncertainty' in it. + * If the data is available 'flags' must contain GPS_CLOCK_HAS_FULL_BIAS. + + */ + int64_t full_bias_ns; + + /** + * Sub-nanosecond bias. + * The value contains the 'bias uncertainty' in it. + * + * If the data is available 'flags' must contain GPS_CLOCK_HAS_BIAS. + */ + double bias_ns; + + /** + * 1-Sigma uncertainty associated with the clock's bias in nanoseconds. + * The uncertainty is represented as an absolute (single sided) value. + * + * If the data is available 'flags' must contain GPS_CLOCK_HAS_BIAS_UNCERTAINTY. + */ + double bias_uncertainty_ns; + + /** + * The clock's drift in nanoseconds (per second). + * A positive value means that the frequency is higher than the nominal frequency. + * + * The value contains the 'drift uncertainty' in it. + * If the data is available 'flags' must contain GPS_CLOCK_HAS_DRIFT. + */ + double drift_nsps; + + /** + * 1-Sigma uncertainty associated with the clock's drift in nanoseconds (per second). + * The uncertainty is represented as an absolute (single sided) value. + * + * If the data is available 'flags' must contain GPS_CLOCK_HAS_DRIFT_UNCERTAINTY. + */ + double drift_uncertainty_nsps; +} GpsClock; + +/** + * Represents a GPS Measurement, it contains raw and computed information. + */ +typedef struct { + /** set to sizeof(GpsMeasurement) */ + size_t size; + + /** A set of flags indicating the validity of the fields in this data structure. */ + GpsMeasurementFlags flags; + + /** + * Pseudo-random number in the range of [1, 32] + * This is a Mandatory value. + */ + int8_t prn; + + /** + * Time offset at which the measurement was taken in nanoseconds. + * The reference receiver's time is specified by GpsData::clock::time_ns and should be + * interpreted in the same way as indicated by GpsClock::type. + * + * The sign of time_offset_ns is given by the following equation: + * measurement time = GpsClock::time_ns + time_offset_ns + * + * It provides an individual time-stamp for the measurement, and allows sub-nanosecond accuracy. + * This is a Mandatory value. + */ + double time_offset_ns; + + /** + * Per satellite sync state. It represents the current sync state for the associated satellite. + * Based on the sync state, the 'received GPS tow' field should be interpreted accordingly. + * + * This is a Mandatory value. + */ + GpsMeasurementState state; + + /** + * Received GPS Time-of-Week at the measurement time, in nanoseconds. + * The value is relative to the beginning of the current GPS week. + * + * Given the sync state of GPS receiver, per each satellite, valid range for this field can be: + * Searching : [ 0 ] : GPS_MEASUREMENT_STATE_UNKNOWN + * Ranging code lock : [ 0 1ms ] : GPS_MEASUREMENT_STATE_CODE_LOCK is set + * Bit sync : [ 0 20ms ] : GPS_MEASUREMENT_STATE_BIT_SYNC is set + * Subframe sync : [ 0 6ms ] : GPS_MEASUREMENT_STATE_SUBFRAME_SYNC is set + * TOW decoded : [ 0 1week ] : GPS_MEASUREMENT_STATE_TOW_DECODED is set + */ + int64_t received_gps_tow_ns; + + /** + * 1-Sigma uncertainty of the Received GPS Time-of-Week in nanoseconds. + */ + int64_t received_gps_tow_uncertainty_ns; + + /** + * Carrier-to-noise density in dB-Hz, in the range [0, 63]. + * It contains the measured C/N0 value for the signal at the antenna input. + * + * This is a Mandatory value. + */ + double c_n0_dbhz; + + /** + * Pseudorange rate at the timestamp in m/s. + * The value also includes the effects of the receiver clock frequency and satellite clock + * frequency errors. + * + * The value includes the 'pseudorange rate uncertainty' in it. + * A positive value indicates that the pseudorange is getting larger. + * + * This is a Mandatory value. + */ + double pseudorange_rate_mps; + + /** + * 1-Sigma uncertainty of the pseudurange rate in m/s. + * The uncertainty is represented as an absolute (single sided) value. + * + * This is a Mandatory value. + */ + double pseudorange_rate_uncertainty_mps; + + /** + * Accumulated delta range's state. It indicates whether ADR is reset or there is a cycle slip + * (indicating loss of lock). + * + * This is a Mandatory value. + */ + GpsAccumulatedDeltaRangeState accumulated_delta_range_state; + + /** + * Accumulated delta range since the last channel reset in meters. + * The data is available if 'accumulated delta range state' != GPS_ADR_STATE_UNKNOWN. + */ + double accumulated_delta_range_m; + + /** + * 1-Sigma uncertainty of the accumulated delta range in meters. + * The data is available if 'accumulated delta range state' != GPS_ADR_STATE_UNKNOWN. + */ + double accumulated_delta_range_uncertainty_m; + + /** + * Best derived Pseudorange by the chip-set, in meters. + * The value contains the 'pseudorange uncertainty' in it. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_PSEUDORANGE. + */ + double pseudorange_m; + + /** + * 1-Sigma uncertainty of the pseudorange in meters. + * The value contains the 'pseudorange' and 'clock' uncertainty in it. + * The uncertainty is represented as an absolute (single sided) value. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_PSEUDORANGE_UNCERTAINTY. + */ + double pseudorange_uncertainty_m; + + /** + * A fraction of the current C/A code cycle, in the range [0.0, 1023.0] + * This value contains the time (in Chip units) since the last C/A code cycle (GPS Msec epoch). + * + * The reference frequency is given by the field 'carrier_frequency_hz'. + * The value contains the 'code-phase uncertainty' in it. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_CODE_PHASE. + */ + double code_phase_chips; + + /** + * 1-Sigma uncertainty of the code-phase, in a fraction of chips. + * The uncertainty is represented as an absolute (single sided) value. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_CODE_PHASE_UNCERTAINTY. + */ + double code_phase_uncertainty_chips; + + /** + * Carrier frequency at which codes and messages are modulated, it can be L1 or L2. + * If the field is not set, the carrier frequency is assumed to be L1. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_CARRIER_FREQUENCY. + */ + float carrier_frequency_hz; + + /** + * The number of full carrier cycles between the satellite and the receiver. + * The reference frequency is given by the field 'carrier_frequency_hz'. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_CARRIER_CYCLES. + */ + int64_t carrier_cycles; + + /** + * The RF phase detected by the receiver, in the range [0.0, 1.0]. + * This is usually the fractional part of the complete carrier phase measurement. + * + * The reference frequency is given by the field 'carrier_frequency_hz'. + * The value contains the 'carrier-phase uncertainty' in it. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_CARRIER_PHASE. + */ + double carrier_phase; + + /** + * 1-Sigma uncertainty of the carrier-phase. + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_CARRIER_PHASE_UNCERTAINTY. + */ + double carrier_phase_uncertainty; + + /** + * An enumeration that indicates the 'loss of lock' state of the event. + */ + GpsLossOfLock loss_of_lock; + + /** + * The number of GPS bits transmitted since Sat-Sun midnight (GPS week). + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_BIT_NUMBER. + */ + int32_t bit_number; + + /** + * The elapsed time since the last received bit in milliseconds, in the range [0, 20] + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_TIME_FROM_LAST_BIT. + */ + int16_t time_from_last_bit_ms; + + /** + * Doppler shift in Hz. + * A positive value indicates that the SV is moving toward the receiver. + * + * The reference frequency is given by the field 'carrier_frequency_hz'. + * The value contains the 'doppler shift uncertainty' in it. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_DOPPLER_SHIFT. + */ + double doppler_shift_hz; + + /** + * 1-Sigma uncertainty of the doppler shift in Hz. + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_DOPPLER_SHIFT_UNCERTAINTY. + */ + double doppler_shift_uncertainty_hz; + + /** + * An enumeration that indicates the 'multipath' state of the event. + */ + GpsMultipathIndicator multipath_indicator; + + /** + * Signal-to-noise ratio in dB. + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_SNR. + */ + double snr_db; + + /** + * Elevation in degrees, the valid range is [-90, 90]. + * The value contains the 'elevation uncertainty' in it. + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_ELEVATION. + */ + double elevation_deg; + + /** + * 1-Sigma uncertainty of the elevation in degrees, the valid range is [0, 90]. + * The uncertainty is represented as the absolute (single sided) value. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_ELEVATION_UNCERTAINTY. + */ + double elevation_uncertainty_deg; + + /** + * Azimuth in degrees, in the range [0, 360). + * The value contains the 'azimuth uncertainty' in it. + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_AZIMUTH. + * */ + double azimuth_deg; + + /** + * 1-Sigma uncertainty of the azimuth in degrees, the valid range is [0, 180]. + * The uncertainty is represented as an absolute (single sided) value. + * + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_AZIMUTH_UNCERTAINTY. + */ + double azimuth_uncertainty_deg; + + /** + * Whether the GPS represented by the measurement was used for computing the most recent fix. + * If the data is available, 'flags' must contain GPS_MEASUREMENT_HAS_USED_IN_FIX. + */ + bool used_in_fix; +} GpsMeasurement; + +/** Represents a reading of GPS measurements. */ +typedef struct { + /** set to sizeof(GpsData) */ + size_t size; + + /** Number of measurements. */ + size_t measurement_count; + + /** The array of measurements. */ + GpsMeasurement measurements[GPS_MAX_MEASUREMENT]; + + /** The GPS clock time reading. */ + GpsClock clock; +} GpsData; + +/** + * The callback for to report measurements from the HAL. + * + * Parameters: + * data - A data structure containing the measurements. + */ +typedef void (*gps_measurement_callback) (GpsData* data); + +typedef struct { + /** set to sizeof(GpsMeasurementCallbacks) */ + size_t size; + gps_measurement_callback measurement_callback; +} GpsMeasurementCallbacks; + +#define GPS_MEASUREMENT_OPERATION_SUCCESS 0 +#define GPS_MEASUREMENT_ERROR_ALREADY_INIT -100 +#define GPS_MEASUREMENT_ERROR_GENERIC -101 + +/** + * Extended interface for GPS Measurements support. + */ +typedef struct { + /** Set to sizeof(GpsMeasurementInterface) */ + size_t size; + + /** + * Initializes the interface and registers the callback routines with the HAL. + * After a successful call to 'init' the HAL must begin to provide updates at its own phase. + * + * Status: + * GPS_MEASUREMENT_OPERATION_SUCCESS + * GPS_MEASUREMENT_ERROR_ALREADY_INIT - if a callback has already been registered without a + * corresponding call to 'close' + * GPS_MEASUREMENT_ERROR_GENERIC - if any other error occurred, it is expected that the HAL + * will not generate any updates upon returning this error code. + */ + int (*init) (GpsMeasurementCallbacks* callbacks); + + /** + * Stops updates from the HAL, and unregisters the callback routines. + * After a call to stop, the previously registered callbacks must be considered invalid by the + * HAL. + * If stop is invoked without a previous 'init', this function should perform no work. + */ + void (*close) (); + +} GpsMeasurementInterface; + + +/** Represents a GPS navigation message (or a fragment of it). */ +typedef struct { + /** set to sizeof(GpsNavigationMessage) */ + size_t size; + + /** + * Pseudo-random number in the range of [1, 32] + * This is a Mandatory value. + */ + int8_t prn; + + /** + * The type of message contained in the structure. + * This is a Mandatory value. + */ + GpsNavigationMessageType type; + + /** + * Message identifier. + * It provides an index so the complete Navigation Message can be assembled. i.e. fo L1 C/A + * subframe 4 and 5, this value corresponds to the 'frame id' of the navigation message. + * Subframe 1, 2, 3 does not contain a 'frame id' and this value can be set to -1. + */ + int16_t message_id; + + /** + * Sub-message identifier. + * If required by the message 'type', this value contains a sub-index within the current + * message (or frame) that is being transmitted. + * i.e. for L1 C/A the submessage id corresponds to the sub-frame id of the navigation message. + */ + int16_t submessage_id; + + /** + * The length of the data (in bytes) contained in the current message. + * If this value is different from zero, 'data' must point to an array of the same size. + * e.g. for L1 C/A the size of the sub-frame will be 40 bytes (10 words, 30 bits/word). + * + * This is a Mandatory value. + */ + size_t data_length; + + /** + * The data of the reported GPS message. + * The bytes (or words) specified using big endian format (MSB first). + * + * For L1 C/A, each subframe contains 10 30-bit GPS words. Each GPS word (30 bits) should be + * fitted into the last 30 bits in a 4-byte word (skip B31 and B32), with MSB first. + */ + uint8_t* data; + +} GpsNavigationMessage; + +/** + * The callback to report an available fragment of a GPS navigation messages from the HAL. + * + * Parameters: + * message - The GPS navigation submessage/subframe representation. + */ +typedef void (*gps_navigation_message_callback) (GpsNavigationMessage* message); + +typedef struct { + /** set to sizeof(GpsNavigationMessageCallbacks) */ + size_t size; + gps_navigation_message_callback navigation_message_callback; +} GpsNavigationMessageCallbacks; + +#define GPS_NAVIGATION_MESSAGE_OPERATION_SUCCESS 0 +#define GPS_NAVIGATION_MESSAGE_ERROR_ALREADY_INIT -100 +#define GPS_NAVIGATION_MESSAGE_ERROR_GENERIC -101 + +/** + * Extended interface for GPS navigation message reporting support. + */ +typedef struct { + /** Set to sizeof(GpsNavigationMessageInterface) */ + size_t size; + + /** + * Initializes the interface and registers the callback routines with the HAL. + * After a successful call to 'init' the HAL must begin to provide updates as they become + * available. + * + * Status: + * GPS_NAVIGATION_MESSAGE_OPERATION_SUCCESS + * GPS_NAVIGATION_MESSAGE_ERROR_ALREADY_INIT - if a callback has already been registered + * without a corresponding call to 'close'. + * GPS_NAVIGATION_MESSAGE_ERROR_GENERIC - if any other error occurred, it is expected that + * the HAL will not generate any updates upon returning this error code. + */ + int (*init) (GpsNavigationMessageCallbacks* callbacks); + + /** + * Stops updates from the HAL, and unregisters the callback routines. + * After a call to stop, the previously registered callbacks must be considered invalid by the + * HAL. + * If stop is invoked without a previous 'init', this function should perform no work. + */ + void (*close) (); + +} GpsNavigationMessageInterface; + +/** + * Interface for passing GNSS configuration contents from platform to HAL. + */ +typedef struct { + /** Set to sizeof(GnssConfigurationInterface) */ + size_t size; + + /** + * Deliver GNSS configuration contents to HAL. + * Parameters: + * config_data - a pointer to a char array which holds what usually is expected from + file(/etc/gps.conf), i.e., a sequence of UTF8 strings separated by '\n'. + * length - total number of UTF8 characters in configuraiton data. + * + * IMPORTANT: + * GPS HAL should expect this function can be called multiple times. And it may be + * called even when GpsLocationProvider is already constructed and enabled. GPS HAL + * should maintain the existing requests for various callback regardless the change + * in configuration data. + */ + void (*configuration_update) (const char* config_data, int32_t length); +} GnssConfigurationInterface; + __END_DECLS #endif /* ANDROID_INCLUDE_HARDWARE_GPS_H */ diff --git a/include/telephony/ril.h b/include/telephony/ril.h index fefc563..18cdb5f 100644 --- a/include/telephony/ril.h +++ b/include/telephony/ril.h @@ -19,6 +19,10 @@ #include #include +#include +#include +#include + #ifndef FEATURE_UNIT_TEST #include #endif /* !FEATURE_UNIT_TEST */ @@ -27,7 +31,22 @@ extern "C" { #endif -#define RIL_VERSION 8 /* Current version */ + +#if defined(ANDROID_SIM_COUNT_2) +#define SIM_COUNT 2 +#elif defined(ANDROID_SIM_COUNT_3) +#define SIM_COUNT 3 +#elif defined(ANDROID_SIM_COUNT_4) +#define SIM_COUNT 4 +#else +#define SIM_COUNT 1 +#endif + +#ifndef ANDROID_MULTI_SIM +#define SIM_COUNT 1 +#endif + +#define RIL_VERSION 10 /* Current version */ #ifdef LEGACY_RIL #define RIL_VERSION_MIN 2 /* Minimum RIL_VERSION supported */ #else @@ -37,9 +56,30 @@ extern "C" { #define CDMA_ALPHA_INFO_BUFFER_LENGTH 64 #define CDMA_NUMBER_INFO_BUFFER_LENGTH 81 +#define MAX_RILDS 3 +#define MAX_SOCKET_NAME_LENGTH 6 +#define MAX_CLIENT_ID_LENGTH 2 +#define MAX_DEBUG_SOCKET_NAME_LENGTH 12 +#define MAX_QEMU_PIPE_NAME_LENGTH 11 + typedef void * RIL_Token; typedef enum { + RIL_SOCKET_1, +#if (SIM_COUNT >= 2) + RIL_SOCKET_2, +#if (SIM_COUNT >= 3) + RIL_SOCKET_3, +#endif +#if (SIM_COUNT >= 4) + RIL_SOCKET_4, +#endif +#endif + RIL_SOCKET_NUM +} RIL_SOCKET_ID; + + +typedef enum { RIL_E_SUCCESS = 0, RIL_E_RADIO_NOT_AVAILABLE = 1, /* If radio did not start or is resetting */ RIL_E_GENERIC_FAILURE = 2, @@ -60,8 +100,10 @@ typedef enum { location */ RIL_E_MODE_NOT_SUPPORTED = 13, /* HW does not support preferred network type */ RIL_E_FDN_CHECK_FAILURE = 14, /* command failed because recipient is not on FDN list */ - RIL_E_ILLEGAL_SIM_OR_ME = 15 /* network selection failed due to + RIL_E_ILLEGAL_SIM_OR_ME = 15, /* network selection failed due to illegal SIM or ME */ + RIL_E_MISSING_RESOURCE = 16, /* no logical channel available */ + RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */ } RIL_Errno; typedef enum { @@ -108,7 +150,7 @@ typedef enum { RADIO_TECH_LTE = 14, RADIO_TECH_HSPAP = 15, // HSPA+ RADIO_TECH_GSM = 16, // Only supports voice - RADIO_TECH_DCHSPAP = 30 + RADIO_TECH_TD_SCDMA = 17 } RIL_RadioTechnology; // Do we want to split Data from Voice and the use @@ -125,7 +167,8 @@ typedef enum { PREF_NET_TYPE_LTE_CDMA_EVDO = 8, /* LTE, CDMA and EvDo */ PREF_NET_TYPE_LTE_GSM_WCDMA = 9, /* LTE, GSM/WCDMA */ PREF_NET_TYPE_LTE_CMDA_EVDO_GSM_WCDMA = 10, /* LTE, CDMA, EvDo, GSM/WCDMA */ - PREF_NET_TYPE_LTE_ONLY = 11 /* LTE only */ + PREF_NET_TYPE_LTE_ONLY = 11, /* LTE only */ + PREF_NET_TYPE_LTE_WCDMA = 12 /* LTE/WCDMA */ } RIL_PreferredNetworkType; /* Source for cdma subscription */ @@ -208,7 +251,6 @@ typedef struct { */ typedef struct { int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ -#ifndef HCRADIO int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry back-off timer value RIL wants to override the one pre-configured in FW. @@ -216,7 +258,6 @@ typedef struct { The value < 0 means no value is suggested. The value 0 means retry should be done ASAP. The value of INT_MAX(0x7fffffff) means no retry. */ -#endif int cid; /* Context ID, uniquely identifies this call */ int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. @@ -240,6 +281,61 @@ typedef struct { } RIL_Data_Call_Response_v6; typedef struct { + int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ + int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry + back-off timer value RIL wants to override the one + pre-configured in FW. + The unit is miliseconds. + The value < 0 means no value is suggested. + The value 0 means retry should be done ASAP. + The value of INT_MAX(0x7fffffff) means no retry. */ + int cid; /* Context ID, uniquely identifies this call */ + int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ + char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. + For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is + PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported + such as "IP" or "IPV6" */ + char * ifname; /* The network interface name */ + char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, + e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". + May not be empty, typically 1 IPv4 or 1 IPv6 or + one of each. If the prefix length is absent the addresses + are assumed to be point to point with IPv4 having a prefix + length of 32 and IPv6 128. */ + char * dnses; /* A space-delimited list of DNS server addresses, + e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". + May be empty. */ + char * gateways; /* A space-delimited list of default gateway addresses, + e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". + May be empty in which case the addresses represent point + to point connections. */ + char * pcscf; /* the Proxy Call State Control Function address + via PCO(Protocol Configuration Option) for IMS client. */ +} RIL_Data_Call_Response_v9; // FIXME: Change to v10 + +typedef enum { + RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */ + RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */ +} RIL_RadioTechnologyFamily; + +typedef struct { + RIL_RadioTechnologyFamily tech; + unsigned char retry; /* 0 == not retry, nonzero == retry */ + int messageRef; /* Valid field if retry is set to nonzero. + Contains messageRef from RIL_SMS_Response + corresponding to failed MO SMS. + */ + + union { + /* Valid field if tech is RADIO_TECH_3GPP2. See RIL_REQUEST_CDMA_SEND_SMS */ + RIL_CDMA_SMS_Message* cdmaMessage; + + /* Valid field if tech is RADIO_TECH_3GPP. See RIL_REQUEST_SEND_SMS */ + char** gsmMessage; + } message; +} RIL_IMS_SMS_Message; + +typedef struct { int messageRef; /* TP-Message-Reference for GSM, and BearerData MessageId for CDMA (See 3GPP2 C.S0015-B, v2.0, table 4.5-1). */ @@ -303,10 +399,27 @@ typedef struct { char *aidPtr; /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */ } RIL_SIM_IO_v6; +/* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and + * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */ +typedef struct { + int sessionid; /* "sessionid" from TS 27.007 +CGLA command. Should be + ignored for +CSIM command. */ + + /* Following fields are used to derive the APDU ("command" and "length" + values in TS 27.007 +CSIM and +CGLA commands). */ + int cla; + int instruction; + int p1; + int p2; + int p3; /* A negative P3 implies a 4 byte APDU. */ + char *data; /* May be NULL. In hex string format. */ +} RIL_SIM_APDU; + typedef struct { int sw1; int sw2; - char *simResponse; /* In hex string format ([a-fA-F0-9]*). */ + char *simResponse; /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION + response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */ } RIL_SIM_IO_Response; /* See also com.android.internal.telephony.gsm.CallForwardInfo */ @@ -394,6 +507,8 @@ typedef enum { PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */ PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22, PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */ + PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio, + based on framework config */ PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */ PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */ PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34, @@ -404,7 +519,7 @@ typedef enum { PDP_FAIL_DATA_REGISTRATION_FAIL = -2, /* reasons for data call drop - network/modem disconnect */ - PDP_FAIL_SIGNAL_LOST = -3, /* no retry */ + PDP_FAIL_SIGNAL_LOST = -3, PDP_FAIL_PREF_RADIO_TECH_CHANGED = -4,/* preferred technology has changed, should retry with parameters appropriate for new technology */ PDP_FAIL_RADIO_POWER_OFF = -5, /* data call was disconnected because radio was resetting, @@ -724,6 +839,13 @@ typedef struct { * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */ } RIL_LTE_SignalStrength_v8; +typedef struct { + int rscp; /* The Received Signal Code Power in dBm multipled by -1. + * Range : 25 to 120 + * INT_MAX: 0x7FFFFFFF denotes invalid value. + * Reference: 3GPP TS 25.123, section 9.1.1.1 */ +} RIL_TD_SCDMA_SignalStrength; + /* Deprecated, use RIL_SignalStrength_v6 */ typedef struct { RIL_GW_SignalStrength GW_SignalStrength; @@ -745,6 +867,14 @@ typedef struct { RIL_LTE_SignalStrength_v8 LTE_SignalStrength; } RIL_SignalStrength_v8; +typedef struct { + RIL_GW_SignalStrength GW_SignalStrength; + RIL_CDMA_SignalStrength CDMA_SignalStrength; + RIL_EVDO_SignalStrength EVDO_SignalStrength; + RIL_LTE_SignalStrength_v8 LTE_SignalStrength; + RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength; +} RIL_SignalStrength_v10; + /** RIL_CellIdentityGsm */ typedef struct { int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ @@ -787,6 +917,15 @@ typedef struct { int tac; /* 16-bit tracking area code, INT_MAX if unknown */ } RIL_CellIdentityLte; +/** RIL_CellIdentityTdscdma */ +typedef struct { + int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ + int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ + int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ + int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */ + int cpid; /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */ +} RIL_CellIdentityTdscdma; + /** RIL_CellInfoGsm */ typedef struct { RIL_CellIdentityGsm cellIdentityGsm; @@ -812,12 +951,19 @@ typedef struct { RIL_LTE_SignalStrength_v8 signalStrengthLte; } RIL_CellInfoLte; +/** RIL_CellInfoTdscdma */ +typedef struct { + RIL_CellIdentityTdscdma cellIdentityTdscdma; + RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma; +} RIL_CellInfoTdscdma; + // Must be the same as CellInfo.TYPE_XXX typedef enum { RIL_CELL_INFO_TYPE_GSM = 1, RIL_CELL_INFO_TYPE_CDMA = 2, RIL_CELL_INFO_TYPE_LTE = 3, RIL_CELL_INFO_TYPE_WCDMA = 4, + RIL_CELL_INFO_TYPE_TD_SCDMA = 5 } RIL_CellInfoType; // Must be the same as CellInfo.TIMESTAMP_TYPE_XXX @@ -839,6 +985,7 @@ typedef struct { RIL_CellInfoCdma cdma; RIL_CellInfoLte lte; RIL_CellInfoWcdma wcdma; + RIL_CellInfoTdscdma tdscdma; } CellInfo; } RIL_CellInfo; @@ -951,11 +1098,118 @@ typedef struct { #define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10 +#define RIL_HARDWARE_CONFIG_UUID_LENGTH 64 + typedef struct { char numberOfInfoRecs; RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS]; } RIL_CDMA_InformationRecords; +/* See RIL_REQUEST_NV_READ_ITEM */ +typedef struct { + RIL_NV_Item itemID; +} RIL_NV_ReadItem; + +/* See RIL_REQUEST_NV_WRITE_ITEM */ +typedef struct { + RIL_NV_Item itemID; + char * value; +} RIL_NV_WriteItem; + +typedef enum { + HANDOVER_STARTED = 0, + HANDOVER_COMPLETED = 1, + HANDOVER_FAILED = 2, + HANDOVER_CANCELED = 3 +} RIL_SrvccState; + +/* hardware configuration reported to RILJ. */ +typedef enum { + RIL_HARDWARE_CONFIG_MODEM = 0, + RIL_HARDWARE_CONFIG_SIM = 1, +} RIL_HardwareConfig_Type; + +typedef enum { + RIL_HARDWARE_CONFIG_STATE_ENABLED = 0, + RIL_HARDWARE_CONFIG_STATE_STANDBY = 1, + RIL_HARDWARE_CONFIG_STATE_DISABLED = 2, +} RIL_HardwareConfig_State; + +typedef struct { + int rilModel; + uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */ + int maxVoice; + int maxData; + int maxStandby; +} RIL_HardwareConfig_Modem; + +typedef struct { + char modemUuid[RIL_HARDWARE_CONFIG_UUID_LENGTH]; +} RIL_HardwareConfig_Sim; + +typedef struct { + RIL_HardwareConfig_Type type; + char uuid[RIL_HARDWARE_CONFIG_UUID_LENGTH]; + RIL_HardwareConfig_State state; + union { + RIL_HardwareConfig_Modem modem; + RIL_HardwareConfig_Sim sim; + } cfg; +} RIL_HardwareConfig; + +/** + * Data connection power state + */ +typedef enum { + RIL_DC_POWER_STATE_LOW = 1, // Low power state + RIL_DC_POWER_STATE_MEDIUM = 2, // Medium power state + RIL_DC_POWER_STATE_HIGH = 3, // High power state + RIL_DC_POWER_STATE_UNKNOWN = INT32_MAX // Unknown state +} RIL_DcPowerStates; + +/** + * Data connection real time info + */ +typedef struct { + uint64_t time; // Time in nanos as returned by ril_nano_time + RIL_DcPowerStates powerState; // Current power state +} RIL_DcRtInfo; + +/** + * Data profile to modem + */ +typedef struct { + /* id of the data profile */ + int profileId; + /* the APN to connect to */ + char* apn; + /** one of the PDP_type values in TS 27.007 section 10.1.1. + * For example, "IP", "IPV6", "IPV4V6", or "PPP". + */ + char* protocol; + /** authentication protocol used for this PDP context + * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3) + */ + int authType; + /* the username for APN, or NULL */ + char* user; + /* the password for APN, or NULL */ + char* password; + /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */ + int type; + /* the period in seconds to limit the maximum connections */ + int maxConnsTime; + /* the maximum connections during maxConnsTime */ + int maxConns; + /** the required wait time in seconds after a successful UE initiated + * disconnect of a given PDN connection before the device can send + * a new PDN connection request for that given PDN + */ + int waitTime; + /* true to enable the profile, 0 to disable, 1 to enable */ + int enabled; +} RIL_DataProfileInfo; + /** * RIL_REQUEST_GET_SIM_STATUS * @@ -3494,57 +3748,355 @@ typedef struct { */ #define RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 110 -/* SAMSUNG REQUESTS */ -#define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002 +/** + * RIL_REQUEST_SET_INITIAL_ATTACH_APN + * + * Set an apn to initial attach network + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * SUBSCRIPTION_NOT_AVAILABLE + */ +#define RIL_REQUEST_SET_INITIAL_ATTACH_APN 111 -#define RIL_REQUEST_SEND_ENCODED_USSD 10005 -#define RIL_REQUEST_SET_PDA_MEMORY_STATUS 10006 -#define RIL_REQUEST_GET_PHONEBOOK_STORAGE_INFO 10007 -#define RIL_REQUEST_GET_PHONEBOOK_ENTRY 10008 -#define RIL_REQUEST_ACCESS_PHONEBOOK_ENTRY 10009 -#define RIL_REQUEST_DIAL_VIDEO_CALL 10010 -#define RIL_REQUEST_CALL_DEFLECTION 10011 -#define RIL_REQUEST_READ_SMS_FROM_SIM 10012 -#define RIL_REQUEST_USIM_PB_CAPA 10013 -#define RIL_REQUEST_LOCK_INFO 10014 +/** + * RIL_REQUEST_IMS_REGISTRATION_STATE + * + * Request current IMS registration state + * + * "data" is NULL + * + * "response" is int * + * ((int *)response)[0] is registration state: + * 0 - Not registered + * 1 - Registered + * + * If ((int*)response)[0] is = 1, then ((int *) response)[1] + * must follow with IMS SMS format: + * + * ((int *) response)[1] is of type RIL_RadioTechnologyFamily + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_IMS_REGISTRATION_STATE 112 -#define RIL_REQUEST_DIAL_EMERGENCY 10016 -#define RIL_REQUEST_GET_STOREAD_MSG_COUNT 10017 -#define RIL_REQUEST_STK_SIM_INIT_EVENT 10018 -#define RIL_REQUEST_GET_LINE_ID 10019 -#define RIL_REQUEST_SET_LINE_ID 10020 -#define RIL_REQUEST_GET_SERIAL_NUMBER 10021 -#define RIL_REQUEST_GET_MANUFACTURE_DATE_NUMBER 10022 -#define RIL_REQUEST_GET_BARCODE_NUMBER 10023 -#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_BOOTSTRAP 10024 -#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_NAF 10025 -#define RIL_REQUEST_SIM_TRANSMIT_BASIC 10026 -#define RIL_REQUEST_SIM_OPEN_CHANNEL 10027 -#define RIL_REQUEST_SIM_CLOSE_CHANNEL 10028 -#define RIL_REQUEST_SIM_TRANSMIT_CHANNEL 10029 -#define RIL_REQUEST_SIM_AUTH 10030 -#define RIL_REQUEST_PS_ATTACH 10031 -#define RIL_REQUEST_PS_DETACH 10032 -#define RIL_REQUEST_ACTIVATE_DATA_CALL 10033 -#define RIL_REQUEST_CHANGE_SIM_PERSO 10034 -#define RIL_REQUEST_ENTER_SIM_PERSO 10035 -#define RIL_REQUEST_GET_TIME_INFO 10036 -#define RIL_REQUEST_OMADM_SETUP_SESSION 10037 -#define RIL_REQUEST_OMADM_SERVER_START_SESSION 10038 -#define RIL_REQUEST_OMADM_CLIENT_START_SESSION 10039 -#define RIL_REQUEST_OMADM_SEND_DATA 10040 -#define RIL_REQUEST_CDMA_GET_DATAPROFILE 10041 -#define RIL_REQUEST_CDMA_SET_DATAPROFILE 10042 -#define RIL_REQUEST_CDMA_GET_SYSTEMPROPERTIES 10043 -#define RIL_REQUEST_CDMA_SET_SYSTEMPROPERTIES 10044 -#define RIL_REQUEST_SEND_SMS_COUNT 10045 -#define RIL_REQUEST_SEND_SMS_MSG 10046 -#define RIL_REQUEST_SEND_SMS_MSG_READ_STATUS 10047 -#define RIL_REQUEST_MODEM_HANGUP 10048 -#define RIL_REQUEST_SET_SIM_POWER 10049 -#define RIL_REQUEST_SET_PREFERRED_NETWORK_LIST 10050 -#define RIL_REQUEST_GET_PREFERRED_NETWORK_LIST 10051 -#define RIL_REQUEST_HANGUP_VT 10052 +/** + * RIL_REQUEST_IMS_SEND_SMS + * + * Send a SMS message over IMS + * + * "data" is const RIL_IMS_SMS_Message * + * + * "response" is a const RIL_SMS_Response * + * + * Based on the return error, caller decides to resend if sending sms + * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry. + * In case of retry, data is encoded based on Voice Technology available. + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * SMS_SEND_FAIL_RETRY + * FDN_CHECK_FAILURE + * GENERIC_FAILURE + * + */ +#define RIL_REQUEST_IMS_SEND_SMS 113 + +/** + * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC + * + * Request APDU exchange on the basic channel. This command reflects TS 27.007 + * "generic SIM access" operation (+CSIM). The modem must ensure proper function + * of GSM/CDMA, and filter commands appropriately. It should filter + * channel management and SELECT by DF name commands. + * + * "data" is a const RIL_SIM_APDU * + * "sessionid" field should be ignored. + * + * "response" is a const RIL_SIM_IO_Response * + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114 + +/** + * RIL_REQUEST_SIM_OPEN_CHANNEL + * + * Open a new logical channel and select the given application. This command + * reflects TS 27.007 "open logical channel" operation (+CCHO). + * + * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220. + * + * "response" is int * + * ((int *)data)[0] contains the session id of the logical channel. + * ((int *)data)[1] onwards may optionally contain the select response for the + * open channel command with one byte per integer. + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + * MISSING_RESOURCE + * NO_SUCH_ELEMENT + */ +#define RIL_REQUEST_SIM_OPEN_CHANNEL 115 + +/** + * RIL_REQUEST_SIM_CLOSE_CHANNEL + * + * Close a previously opened logical channel. This command reflects TS 27.007 + * "close logical channel" operation (+CCHC). + * + * "data" is int * + * ((int *)data)[0] is the session id of logical the channel to close. + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SIM_CLOSE_CHANNEL 116 + +/** + * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL + * + * Exchange APDUs with a UICC over a previously opened logical channel. This + * command reflects TS 27.007 "generic logical channel access" operation + * (+CGLA). The modem should filter channel management and SELECT by DF name + * commands. + * + * "data" is a const RIL_SIM_APDU* + * + * "response" is a const RIL_SIM_IO_Response * + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117 + +/** + * RIL_REQUEST_NV_READ_ITEM + * + * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. + * This is used for device configuration by some CDMA operators. + * + * "data" is a const RIL_NV_ReadItem * + * + * "response" is const char * containing the contents of the NV item + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_READ_ITEM 118 + +/** + * RIL_REQUEST_NV_WRITE_ITEM + * + * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. + * This is used for device configuration by some CDMA operators. + * + * "data" is a const RIL_NV_WriteItem * + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_WRITE_ITEM 119 + +/** + * RIL_REQUEST_NV_WRITE_CDMA_PRL + * + * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. + * This is used for device configuration by some CDMA operators. + * + * "data" is a const char * containing the PRL as a byte array + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_WRITE_CDMA_PRL 120 + +/** + * RIL_REQUEST_NV_RESET_CONFIG + * + * Reset the radio NV configuration to the factory state. + * This is used for device configuration by some CDMA operators. + * + * "data" is int * + * ((int *)data)[0] is 1 to reload all NV items + * ((int *)data)[0] is 2 for erase NV reset (SCRTN) + * ((int *)data)[0] is 3 for factory reset (RTN) + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_RESET_CONFIG 121 + + /** RIL_REQUEST_SET_UICC_SUBSCRIPTION + * FIXME This API needs to have more documentation. + * + * Selection/de-selection of a subscription from a SIM card + * "data" is const RIL_SelectUiccSub* + + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * SUBSCRIPTION_NOT_SUPPORTED + * + */ +#define RIL_REQUEST_SET_UICC_SUBSCRIPTION 122 + +/** + * RIL_REQUEST_ALLOW_DATA + * + * Tells the modem whether data calls are allowed or not + * + * "data" is int * + * FIXME slotId and aid will be added. + * ((int *)data)[0] is == 0 to allow data calls + * ((int *)data)[0] is == 1 to disallow data calls + * + * "response" is NULL + * + * Valid errors: + * + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * + */ +#define RIL_REQUEST_ALLOW_DATA 123 + +/** + * RIL_REQUEST_GET_HARDWARE_CONFIG + * + * Request all of the current hardware (modem and sim) associated + * with the RIL. + * + * "data" is NULL + * + * "response" is an array of RIL_HardwareConfig. + */ +#define RIL_REQUEST_GET_HARDWARE_CONFIG 124 + +/** + * RIL_REQUEST_SIM_AUTHENTICATION + * + * Returns the response of SIM Authentication through RIL to a + * challenge request. + * + * "data" Base64 encoded string containing challenge: + * int authContext; P2 value of authentication command, see P2 parameter in + * 3GPP TS 31.102 7.1.2 + * char *authData; the challenge string in Base64 format, see 3GPP + * TS 31.102 7.1.2 + * char *aid; AID value, See ETSI 102.221 8.1 and 101.220 4, + * NULL if no value + * + * "response" Base64 encoded strings containing response: + * int sw1; Status bytes per 3GPP TS 31.102 section 7.3 + * int sw2; + * char *simResponse; Response in Base64 format, see 3GPP TS 31.102 7.1.2 + */ +#define RIL_REQUEST_SIM_AUTHENTICATION 125 + +/** + * RIL_REQUEST_GET_DC_RT_INFO + * + * Requests the Data Connection Real Time Info + * + * "data" is NULL + * + * "response" is the most recent RIL_DcRtInfo + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + * + * See also: RIL_UNSOL_DC_RT_INFO_CHANGED + */ +#define RIL_REQUEST_GET_DC_RT_INFO 126 + +/** + * RIL_REQUEST_SET_DC_RT_INFO_RATE + * + * This is the minimum number of milliseconds between successive + * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate + * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of + * 0 means send as fast as possible. + * + * "data" The number of milliseconds as an int + * + * "response" is null + * + * Valid errors: + * SUCCESS must not fail + */ +#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127 + +/** + * RIL_REQUEST_SET_DATA_PROFILE + * + * Set data profile in modem + * "data" is an const RIL_DataProfileInfo ** + * "datalen" is count * sizeof(const RIL_DataProfileInfo *) + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * SUBSCRIPTION_NOT_AVAILABLE + */ +#define RIL_REQUEST_SET_DATA_PROFILE 128 + +/** + * RIL_REQUEST_SHUTDOWN + * + * Device is shutting down. All further commands are ignored + * and RADIO_NOT_AVAILABLE must be returned. + * + * "data" is null + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SHUTDOWN 129 /***********************************************************************/ @@ -4037,6 +4589,128 @@ typedef struct { */ #define RIL_UNSOL_CELL_INFO_LIST 1036 +/** + * RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED + * + * Called when IMS registration state has changed + * + * To get IMS registration state and IMS SMS format, callee needs to invoke the + * following request on main thread: + * + * RIL_REQUEST_IMS_REGISTRATION_STATE + * + * "data" is NULL + * + */ +#define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037 + +/** + * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED + * + * Indicated when there is a change in subscription status. + * This event will be sent in the following scenarios + * - subscription readiness at modem, which was selected by telephony layer + * - when subscription is deactivated by modem due to UICC card removal + * - When network invalidates the subscription i.e. attach reject due to authentication reject + * + * "data" is const int * + * ((const int *)data)[0] == 0 for Subscription Deactivated + * ((const int *)data)[0] == 1 for Subscription Activated + * + */ +#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038 + +/** + * RIL_UNSOL_SRVCC_STATE_NOTIFY + * + * Called when Single Radio Voice Call Continuity(SRVCC) + * progress state has changed + * + * "data" is int * + * ((int *)data)[0] is of type const RIL_SrvccState + * + */ + +#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039 + +/** + * RIL_UNSOL_HARDWARE_CONFIG_CHANGED + * + * Called when the hardware configuration associated with the RILd changes + * + * "data" is an array of RIL_HardwareConfig + * + */ +#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040 + +/** + * RIL_UNSOL_DC_RT_INFO_CHANGED + * + * Sent when the DC_RT_STATE changes but the time + * between these messages must not be less than the + * value set by RIL_REQUEST_SET_DC_RT_RATE. + * + * "data" is the most recent RIL_DcRtInfo + * + */ +#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041 + +/***********************************************************************/ + +/* SAMSUNG REQUESTS */ +#define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002 + +#define RIL_REQUEST_SEND_ENCODED_USSD 10005 +#define RIL_REQUEST_SET_PDA_MEMORY_STATUS 10006 +#define RIL_REQUEST_GET_PHONEBOOK_STORAGE_INFO 10007 +#define RIL_REQUEST_GET_PHONEBOOK_ENTRY 10008 +#define RIL_REQUEST_ACCESS_PHONEBOOK_ENTRY 10009 +#define RIL_REQUEST_DIAL_VIDEO_CALL 10010 +#define RIL_REQUEST_CALL_DEFLECTION 10011 +#define RIL_REQUEST_READ_SMS_FROM_SIM 10012 +#define RIL_REQUEST_USIM_PB_CAPA 10013 +#define RIL_REQUEST_LOCK_INFO 10014 + +#define RIL_REQUEST_DIAL_EMERGENCY 10016 +#define RIL_REQUEST_GET_STOREAD_MSG_COUNT 10017 +#define RIL_REQUEST_STK_SIM_INIT_EVENT 10018 +#define RIL_REQUEST_GET_LINE_ID 10019 +#define RIL_REQUEST_SET_LINE_ID 10020 +#define RIL_REQUEST_GET_SERIAL_NUMBER 10021 +#define RIL_REQUEST_GET_MANUFACTURE_DATE_NUMBER 10022 +#define RIL_REQUEST_GET_BARCODE_NUMBER 10023 +#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_BOOTSTRAP 10024 +#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_NAF 10025 +#define RIL_REQUEST_SIM_TRANSMIT_BASIC 10026 +#define RIL_REQUEST_SIM_OPEN_CHANNEL 10027 +#define RIL_REQUEST_SIM_CLOSE_CHANNEL 10028 +#define RIL_REQUEST_SIM_TRANSMIT_CHANNEL 10029 +#define RIL_REQUEST_SIM_AUTH 10030 +#define RIL_REQUEST_PS_ATTACH 10031 +#define RIL_REQUEST_PS_DETACH 10032 +#define RIL_REQUEST_ACTIVATE_DATA_CALL 10033 +#define RIL_REQUEST_CHANGE_SIM_PERSO 10034 +#define RIL_REQUEST_ENTER_SIM_PERSO 10035 +#define RIL_REQUEST_GET_TIME_INFO 10036 +#define RIL_REQUEST_OMADM_SETUP_SESSION 10037 +#define RIL_REQUEST_OMADM_SERVER_START_SESSION 10038 +#define RIL_REQUEST_OMADM_CLIENT_START_SESSION 10039 +#define RIL_REQUEST_OMADM_SEND_DATA 10040 +#define RIL_REQUEST_CDMA_GET_DATAPROFILE 10041 +#define RIL_REQUEST_CDMA_SET_DATAPROFILE 10042 +#define RIL_REQUEST_CDMA_GET_SYSTEMPROPERTIES 10043 +#define RIL_REQUEST_CDMA_SET_SYSTEMPROPERTIES 10044 +#define RIL_REQUEST_SEND_SMS_COUNT 10045 +#define RIL_REQUEST_SEND_SMS_MSG 10046 +#define RIL_REQUEST_SEND_SMS_MSG_READ_STATUS 10047 +#define RIL_REQUEST_MODEM_HANGUP 10048 +#define RIL_REQUEST_SET_SIM_POWER 10049 +#define RIL_REQUEST_SET_PREFERRED_NETWORK_LIST 10050 +#define RIL_REQUEST_GET_PREFERRED_NETWORK_LIST 10051 +#define RIL_REQUEST_HANGUP_VT 10052 + +/***********************************************************************/ + /* SAMSUNG RESPONSE */ #define SAMSUNG_UNSOL_RESPONSE_BASE 11000 @@ -4074,6 +4748,27 @@ typedef struct { /***********************************************************************/ +#if defined(ANDROID_MULTI_SIM) +/** + * RIL_Request Function pointer + * + * @param request is one of RIL_REQUEST_* + * @param data is pointer to data defined for that RIL_REQUEST_* + * data is owned by caller, and should not be modified or freed by callee + * @param t should be used in subsequent call to RIL_onResponse + * @param datalen the length of data + * + */ +typedef void (*RIL_RequestFunc) (int request, void *data, + size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id); + +/** + * This function should return the current radio state synchronously + */ +typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id); + +#else +/* Backward compatible */ /** * RIL_Request Function pointer @@ -4093,6 +4788,9 @@ typedef void (*RIL_RequestFunc) (int request, void *data, */ typedef RIL_RadioState (*RIL_RadioStateRequest)(); +#endif + + /** * This function returns "1" if the specified RIL_REQUEST code is * supported and 0 if it is not @@ -4140,6 +4838,23 @@ typedef struct { RIL_GetVersion getVersion; } RIL_RadioFunctions; +typedef struct { + char *apn; + char *protocol; + int authtype; + char *username; + char *password; +} RIL_InitialAttachApn; + +typedef struct { + int authContext; /* P2 value of authentication command, see P2 parameter in + 3GPP TS 31.102 7.1.2 */ + char *authData; /* the challenge string in Base64 format, see 3GPP + TS 31.102 7.1.2 */ + char *aid; /* AID value, See ETSI 102.221 8.1 and 101.220 4, + NULL if no value. */ +} RIL_SimAuthentication; + #ifdef RIL_SHLIB struct RIL_Env { /** @@ -4156,16 +4871,23 @@ struct RIL_Env { void (*OnRequestComplete)(RIL_Token t, RIL_Errno e, void *response, size_t responselen); +#if defined(ANDROID_MULTI_SIM) /** * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* * * "data" is owned by caller, and should not be modified or freed by callee */ - - void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, - size_t datalen); - + void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id); +#else + /** + * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* + * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* + * + * "data" is owned by caller, and should not be modified or freed by callee + */ + void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen); +#endif /** * Call user-specifed "callback" function on on the same thread that * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies @@ -4216,6 +4938,7 @@ void RIL_register (const RIL_RadioFunctions *callbacks); void RIL_onRequestComplete(RIL_Token t, RIL_Errno e, void *response, size_t responselen); +#if defined(ANDROID_MULTI_SIM) /** * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* @@ -4224,8 +4947,18 @@ void RIL_onRequestComplete(RIL_Token t, RIL_Errno e, */ void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, - size_t datalen); + size_t datalen, RIL_SOCKET_ID socket_id); +#else +/** + * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* + * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* + * "data" is owned by caller, and should not be modified or freed by callee + * @param datalen the length of data in byte + */ +void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, + size_t datalen); +#endif /** * Call user-specifed "callback" function on on the same thread that @@ -4250,3 +4983,4 @@ void RIL_requestTimedCallback (RIL_TimedCallback callback, #endif #endif /*ANDROID_RIL_H*/ + -- cgit v1.1