Conf

3 files changed, 63 insertions, 31 deletions

diff --git a/configs/melfas_ts.idc b/configs/melfas_ts.idc
deleted file mode 100755
index 703e73b..0000000
--- a/configs/melfas_ts.idc
+++ /dev/null
@@ -1,24 +0,0 @@
-# Copyright (C) 2010 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#
-# Input Device Configuration File for the Atmel Maxtouch touch screen.
-#
-# These calibration values are derived from empirical measurements
-# and may not be appropriate for use with other touch screens.
-# Refer to the input device configuration documentation for more details.
-#
-
-# Basic Parameters
-touch.deviceType = touchScreen
diff --git a/configs/sec_touchscreen.idc b/configs/sec_touchscreen.idc
index 4bd511a..d258f04 100755
--- a/configs/sec_touchscreen.idc
+++ b/configs/sec_touchscreen.idc
@@ -13,11 +13,11 @@
 # limitations under the License.
 
 #
-# Input Device Configuration File for the Atmel Maxtouch touch screen.
+# Input Device Calibration File for the Crespo touch screen.
 #
 # These calibration values are derived from empirical measurements
 # and may not be appropriate for use with other touch screens.
-# Refer to the input device configuration documentation for more details.
+# Refer to the input device calibration documentation for more details.
 #
 
 # Basic Parameters
@@ -31,26 +31,26 @@ touch.touchSize.calibration = pressure
 # Driver reports tool size as an area measurement.
 #
 # Based on empirical measurements, we estimate the size of the tool
-# using size = sqrt(22 * rawToolArea + 0) * 6 + 0.
+# using size = sqrt(22 * rawToolArea + 0) * 9.2 + 0.
 touch.toolSize.calibration = area
 touch.toolSize.areaScale = 22
 touch.toolSize.areaBias = 0
-touch.toolSize.linearScale = 6
+touch.toolSize.linearScale = 9.2
 touch.toolSize.linearBias = 0
 touch.toolSize.isSummed = 0
 
 # Pressure
 # Driver reports signal strength as pressure.
 #
-# A normal index finger touch typically registers about 80 signal strength
+# A normal thumb touch typically registers about 100 signal strength
 # units although we don't expect these values to be accurate.
 touch.pressure.calibration = amplitude
 touch.pressure.source = default
-touch.pressure.scale = 0.0125
+touch.pressure.scale = 0.01
 
 # Size
 touch.size.calibration = normalized
 
 # Orientation
-touch.orientation.calibration = vector
+touch.orientation.calibration = none
 
diff --git a/configs/sec_ts_ics_bio.idc b/configs/sec_ts_ics_bio.idc
new file mode 100755
index 0000000..eb46d0a
--- /dev/null
+++ b/configs/sec_ts_ics_bio.idc
@@ -0,0 +1,56 @@
+# Copyright (C) 2010 The Android Open Source Project

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#      http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

+#

+# Input Device Calibration File for the Crespo touch screen.

+#

+# These calibration values are derived from empirical measurements

+# and may not be appropriate for use with other touch screens.

+# Refer to the input device calibration documentation for more details.

+#

+

+# Basic Parameters

+touch.deviceType = touchScreen

+touch.orientationAware = 1

+

+# Touch Size

+touch.touchSize.calibration = pressure

+

+# Tool Size

+# Driver reports tool size as an area measurement.

+#

+# Based on empirical measurements, we estimate the size of the tool

+# using size = sqrt(22 * rawToolArea + 0) * 9.2 + 0.

+touch.toolSize.calibration = area

+touch.toolSize.areaScale = 22

+touch.toolSize.areaBias = 0

+touch.toolSize.linearScale = 9.2

+touch.toolSize.linearBias = 0

+touch.toolSize.isSummed = 0

+

+# Pressure

+# Driver reports signal strength as pressure.

+#

+# A normal thumb touch typically registers about 100 signal strength

+# units although we don't expect these values to be accurate.

+touch.pressure.calibration = amplitude

+touch.pressure.source = default

+touch.pressure.scale = 0.01

+

+# Size

+touch.size.calibration = normalized

+

+# Orientation

+touch.orientation.calibration = none

+