diff options
-rw-r--r-- | BoardConfig.mk | 5 | ||||
-rw-r--r-- | audio/audio_hw.c | 133 | ||||
-rw-r--r-- | bluetooth/bdroid_buildcfg.h | 22 | ||||
-rw-r--r-- | device.mk | 4 | ||||
-rw-r--r-- | dumpstate/dumpstate.c | 1 | ||||
-rwxr-xr-x | init.tuna.rc | 36 | ||||
-rw-r--r-- | kernel | bin | 4143200 -> 4148132 bytes | |||
-rw-r--r-- | overlay/frameworks/base/core/res/res/values/config.xml | 10 | ||||
-rw-r--r-- | overlay/packages/apps/Settings/res/values-cs/arrays.xml | 12 | ||||
-rw-r--r-- | overlay/packages/apps/Settings/res/values-fa/arrays.xml | 12 | ||||
-rw-r--r-- | overlay/packages/apps/Settings/res/values-nb/arrays.xml | 8 | ||||
-rw-r--r-- | releasetools.py | 2 |
12 files changed, 127 insertions, 118 deletions
diff --git a/BoardConfig.mk b/BoardConfig.mk index 6df76b3..b07c668 100644 --- a/BoardConfig.mk +++ b/BoardConfig.mk @@ -21,6 +21,10 @@ USE_CAMERA_STUB := true # Use the non-open-source parts, if they're present -include vendor/samsung/tuna/BoardConfigVendor.mk +# Default values, if not overridden else where. +TARGET_BOARD_INFO_FILE ?= device/samsung/tuna/board-info.txt +BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR ?= device/samsung/tuna/bluetooth + TARGET_CPU_ABI := armeabi-v7a TARGET_CPU_ABI2 := armeabi TARGET_CPU_SMP := true @@ -36,7 +40,6 @@ BOARD_KERNEL_BASE := 0x80000000 TARGET_NO_RADIOIMAGE := true TARGET_BOARD_PLATFORM := omap4 TARGET_BOOTLOADER_BOARD_NAME := tuna -TARGET_BOARD_INFO_FILE ?= device/samsung/tuna/board-info.txt BOARD_EGL_CFG := device/samsung/tuna/egl.cfg BOARD_CREATE_TUNA_HDCP_KEYS_SYMLINK := true diff --git a/audio/audio_hw.c b/audio/audio_hw.c index 74f2383..4206893 100644 --- a/audio/audio_hw.c +++ b/audio/audio_hw.c @@ -127,7 +127,7 @@ /* #define to use mmap no-irq mode for playback, #undef for non-mmap irq mode */ #undef PLAYBACK_MMAP // was #define /* short period (aka low latency) in milliseconds */ -#define SHORT_PERIOD_MS 4 // was 22 +#define SHORT_PERIOD_MS 3 // was 22 /* deep buffer short period (screen on) in milliseconds */ #define DEEP_BUFFER_SHORT_PERIOD_MS 22 /* deep buffer long period (screen off) in milliseconds */ @@ -180,6 +180,11 @@ */ #ifdef PLAYBACK_MMAP #define PLAYBACK_SHORT_PERIOD_COUNT 4 +/* If sample rate converter is required, then use triple-buffering to + * help mask the variance in cycle times. Otherwise use double-buffering. + */ +#elif DEFAULT_OUT_SAMPLING_RATE != MM_FULL_POWER_SAMPLING_RATE +#define PLAYBACK_SHORT_PERIOD_COUNT 3 #else #define PLAYBACK_SHORT_PERIOD_COUNT 2 #endif @@ -297,6 +302,7 @@ enum tty_modes { TTY_MODE_FULL }; +/* deep buffer */ struct pcm_config pcm_config_mm = { .channels = 2, .rate = MM_FULL_POWER_SAMPLING_RATE, @@ -307,6 +313,7 @@ struct pcm_config pcm_config_mm = { .avail_min = DEEP_BUFFER_LONG_PERIOD_SIZE, }; +/* low latency */ struct pcm_config pcm_config_tones = { .channels = 2, .rate = MM_FULL_POWER_SAMPLING_RATE, @@ -638,7 +645,8 @@ struct tuna_audio_device { struct mixer *mixer; struct mixer_ctls mixer_ctls; audio_mode_t mode; - int devices; + int out_device; + int in_device; struct pcm *pcm_modem_dl; struct pcm *pcm_modem_ul; int in_call; @@ -868,7 +876,7 @@ static void end_call(struct tuna_audio_device *adev) static void set_eq_filter(struct tuna_audio_device *adev) { /* DL1_EQ can't be used for bt */ - int dl1_eq_applicable = adev->devices & (AUDIO_DEVICE_OUT_WIRED_HEADSET | + int dl1_eq_applicable = adev->out_device & (AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE | AUDIO_DEVICE_OUT_EARPIECE); /* 4Khz LPF is used only in NB-AMR voicecall */ @@ -901,7 +909,7 @@ static void set_incall_device(struct tuna_audio_device *adev) { int device_type; - switch(adev->devices & AUDIO_DEVICE_OUT_ALL) { + switch(adev->out_device) { case AUDIO_DEVICE_OUT_EARPIECE: device_type = SOUND_AUDIO_PATH_HANDSET; break; @@ -990,8 +998,8 @@ static void set_output_volumes(struct tuna_audio_device *adev, bool tty_volume) int headset_volume; int earpiece_volume; bool toro = adev->device_is_toro; - int headphone_on = adev->devices & AUDIO_DEVICE_OUT_WIRED_HEADPHONE; - int speaker_on = adev->devices & AUDIO_DEVICE_OUT_SPEAKER; + int headphone_on = adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADPHONE; + int speaker_on = adev->out_device & AUDIO_DEVICE_OUT_SPEAKER; int speaker_volume_overrange = MIXER_ABE_GAIN_0DB; int speaker_max_db = DB_FROM_SPEAKER_VOLUME(mixer_ctl_get_range_max(adev->mixer_ctls.speaker_volume)); @@ -1042,7 +1050,7 @@ static void set_output_volumes(struct tuna_audio_device *adev, bool tty_volume) */ if (headphone_on) dl1_volume_correction = normal_headphone_volume - headset_volume; - else if (adev->devices & AUDIO_DEVICE_OUT_WIRED_HEADSET) + else if (adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADSET) dl1_volume_correction = normal_headset_volume - headset_volume; else dl1_volume_correction = normal_earpiece_volume - earpiece_volume; @@ -1131,18 +1139,18 @@ static void select_mode(struct tuna_audio_device *adev) after the ringtone is played, but doesn't cause a route change if a headset or bt device is already connected. If speaker is not the only thing active, just remove it from - the route. We'll assume it'll never be used initally during + the route. We'll assume it'll never be used initially during a call. This works because we're sure that the audio policy manager will update the output device after the audio mode change, even if the device selection did not change. */ - if ((adev->devices & AUDIO_DEVICE_OUT_ALL) == AUDIO_DEVICE_OUT_SPEAKER) - adev->devices = AUDIO_DEVICE_OUT_EARPIECE | - AUDIO_DEVICE_IN_BUILTIN_MIC; - else - adev->devices &= ~AUDIO_DEVICE_OUT_SPEAKER; + if (adev->out_device == AUDIO_DEVICE_OUT_SPEAKER) { + adev->out_device = AUDIO_DEVICE_OUT_EARPIECE; + adev->in_device = AUDIO_DEVICE_IN_BUILTIN_MIC & ~AUDIO_DEVICE_BIT_IN; + } else + adev->out_device &= ~AUDIO_DEVICE_OUT_SPEAKER; select_output_device(adev); start_call(adev); - adev_set_voice_volume(&adev->hw_device, adev->voice_volume); + ril_set_call_volume(&adev->ril, SOUND_TYPE_VOICE, adev->voice_volume); adev->in_call = 1; } } else { @@ -1179,11 +1187,11 @@ static void select_output_device(struct tuna_audio_device *adev) channel, 0); } - headset_on = adev->devices & AUDIO_DEVICE_OUT_WIRED_HEADSET; - headphone_on = adev->devices & AUDIO_DEVICE_OUT_WIRED_HEADPHONE; - speaker_on = adev->devices & AUDIO_DEVICE_OUT_SPEAKER; - earpiece_on = adev->devices & AUDIO_DEVICE_OUT_EARPIECE; - bt_on = adev->devices & AUDIO_DEVICE_OUT_ALL_SCO; + headset_on = adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADSET; + headphone_on = adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADPHONE; + speaker_on = adev->out_device & AUDIO_DEVICE_OUT_SPEAKER; + earpiece_on = adev->out_device & AUDIO_DEVICE_OUT_EARPIECE; + bt_on = adev->out_device & AUDIO_DEVICE_OUT_ALL_SCO; /* force rx path according to TTY mode when in call */ if (adev->mode == AUDIO_MODE_IN_CALL && !bt_on) { @@ -1208,7 +1216,7 @@ static void select_output_device(struct tuna_audio_device *adev) default: /* force speaker on when in call and HDMI or S/PDIF is selected * as voice DL audio cannot be routed there by ABE */ - if (adev->devices & + if (adev->out_device & (AUDIO_DEVICE_OUT_AUX_DIGITAL | AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) speaker_on = 1; @@ -1308,18 +1316,18 @@ static void select_input_device(struct tuna_audio_device *adev) int headset_on = 0; int main_mic_on = 0; int sub_mic_on = 0; - int bt_on = adev->devices & AUDIO_DEVICE_IN_ALL_SCO; + int bt_on = adev->in_device & AUDIO_DEVICE_IN_ALL_SCO; if (!bt_on) { if ((adev->mode != AUDIO_MODE_IN_CALL) && (adev->active_input != 0)) { /* sub mic is used for camcorder or VoIP on speaker phone */ sub_mic_on = (adev->active_input->source == AUDIO_SOURCE_CAMCORDER) || - ((adev->devices & AUDIO_DEVICE_OUT_SPEAKER) && + ((adev->out_device & AUDIO_DEVICE_OUT_SPEAKER) && (adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION)); } if (!sub_mic_on) { - headset_on = adev->devices & AUDIO_DEVICE_IN_WIRED_HEADSET; - main_mic_on = adev->devices & AUDIO_DEVICE_IN_BUILTIN_MIC; + headset_on = adev->in_device & AUDIO_DEVICE_IN_WIRED_HEADSET; + main_mic_on = adev->in_device & AUDIO_DEVICE_IN_BUILTIN_MIC; } } @@ -1388,8 +1396,7 @@ static int start_output_stream_low_latency(struct tuna_stream_out *out) * tinyalsa. */ - if (adev->devices & (AUDIO_DEVICE_OUT_ALL & - ~(AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET | AUDIO_DEVICE_OUT_AUX_DIGITAL))) { + if (adev->out_device & ~(AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET | AUDIO_DEVICE_OUT_AUX_DIGITAL)) { /* Something not a dock in use */ out->config[PCM_NORMAL] = pcm_config_tones; out->config[PCM_NORMAL].rate = MM_FULL_POWER_SAMPLING_RATE; @@ -1397,7 +1404,7 @@ static int start_output_stream_low_latency(struct tuna_stream_out *out) flags, &out->config[PCM_NORMAL]); } - if (adev->devices & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) { + if (adev->out_device & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) { /* SPDIF output in use */ out->config[PCM_SPDIF] = pcm_config_tones; out->config[PCM_SPDIF].rate = MM_FULL_POWER_SAMPLING_RATE; @@ -1406,7 +1413,7 @@ static int start_output_stream_low_latency(struct tuna_stream_out *out) } /* priority is given to multichannel HDMI output */ - if ((adev->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) && + if ((adev->out_device & AUDIO_DEVICE_OUT_AUX_DIGITAL) && (adev->outputs[OUTPUT_HDMI] == NULL || adev->outputs[OUTPUT_HDMI]->standby)) { /* HDMI output in use */ out->config[PCM_HDMI] = pcm_config_tones; @@ -1681,7 +1688,7 @@ static size_t out_get_buffer_size_hdmi(const struct audio_stream *stream) return HDMI_MULTI_PERIOD_SIZE * audio_stream_frame_size((struct audio_stream *)stream); } -static uint32_t out_get_channels(const struct audio_stream *stream) +static audio_channel_mask_t out_get_channels(const struct audio_stream *stream) { struct tuna_stream_out *out = (struct tuna_stream_out *)stream; @@ -1785,7 +1792,7 @@ static int out_set_parameters(struct audio_stream *stream, const char *kvpairs) val = atoi(value); pthread_mutex_lock(&adev->lock); pthread_mutex_lock(&out->lock); - if (((adev->devices & AUDIO_DEVICE_OUT_ALL) != val) && (val != 0)) { + if ((adev->out_device != val) && (val != 0)) { /* this is needed only when changing device on low latency output * as other output streams are not used for voice use cases nor * handle duplication to HDMI or SPDIF */ @@ -1804,26 +1811,25 @@ static int out_set_parameters(struct audio_stream *stream, const char *kvpairs) * (several hundred ms of audio can be lost: e.g beginning of a ringtone. We must understand * the root cause in audio HAL, driver or ABE. if (((val & AUDIO_DEVICE_OUT_AUX_DIGITAL) ^ - (adev->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL)) || + (adev->out_device & AUDIO_DEVICE_OUT_AUX_DIGITAL)) || ((val & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) ^ - (adev->devices & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || - (adev->devices & (AUDIO_DEVICE_OUT_AUX_DIGITAL | + (adev->out_device & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || + (adev->out_device & (AUDIO_DEVICE_OUT_AUX_DIGITAL | AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET))) */ if (((val & AUDIO_DEVICE_OUT_AUX_DIGITAL) ^ - (adev->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL)) || + (adev->out_device & AUDIO_DEVICE_OUT_AUX_DIGITAL)) || ((val & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) ^ - (adev->devices & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || - (adev->devices & (AUDIO_DEVICE_OUT_AUX_DIGITAL | + (adev->out_device & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || + (adev->out_device & (AUDIO_DEVICE_OUT_AUX_DIGITAL | AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || ((val & AUDIO_DEVICE_OUT_SPEAKER) ^ - (adev->devices & AUDIO_DEVICE_OUT_SPEAKER)) || + (adev->out_device & AUDIO_DEVICE_OUT_SPEAKER)) || (adev->mode == AUDIO_MODE_IN_CALL)) do_output_standby(out); } if (out != adev->outputs[OUTPUT_HDMI]) { - adev->devices &= ~AUDIO_DEVICE_OUT_ALL; - adev->devices |= val; + adev->out_device = val; select_output_device(adev); } } @@ -1871,7 +1877,7 @@ static char * out_get_parameters(const struct audio_stream *stream, const char * i++; } str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value); - str = strdup(str_parms_to_str(reply)); + str = str_parms_to_str(reply); } else { str = strdup(keys); } @@ -2166,8 +2172,7 @@ static int start_input_stream(struct tuna_stream_in *in) adev->active_input = in; if (adev->mode != AUDIO_MODE_IN_CALL) { - adev->devices &= ~AUDIO_DEVICE_IN_ALL; - adev->devices |= in->device; + adev->in_device = in->device; select_input_device(adev); } @@ -2195,7 +2200,7 @@ static int start_input_stream(struct tuna_stream_in *in) if (in->need_echo_reference && in->echo_reference == NULL) in->echo_reference = get_echo_reference(adev, AUDIO_FORMAT_PCM_16_BIT, - in->config.channels, + popcount(in->main_channels), in->requested_rate); /* this assumes routing is done previously */ @@ -2240,7 +2245,7 @@ static size_t in_get_buffer_size(const struct audio_stream *stream) popcount(in->main_channels)); } -static uint32_t in_get_channels(const struct audio_stream *stream) +static audio_channel_mask_t in_get_channels(const struct audio_stream *stream) { struct tuna_stream_in *in = (struct tuna_stream_in *)stream; @@ -2268,7 +2273,7 @@ static int do_input_standby(struct tuna_stream_in *in) adev->active_input = 0; if (adev->mode != AUDIO_MODE_IN_CALL) { - adev->devices &= ~AUDIO_DEVICE_IN_ALL; + adev->in_device = AUDIO_DEVICE_NONE; select_input_device(adev); } @@ -2329,7 +2334,7 @@ static int in_set_parameters(struct audio_stream *stream, const char *kvpairs) ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); if (ret >= 0) { - val = atoi(value); + val = atoi(value) & ~AUDIO_DEVICE_BIT_IN; if ((in->device != val) && (val != 0)) { in->device = val; do_standby = true; @@ -3298,8 +3303,7 @@ static int adev_open_output_stream(struct audio_hw_device *dev, /* FIXME: when we support multiple output devices, we will want to * do the following: - * adev->devices &= ~AUDIO_DEVICE_OUT_ALL; - * adev->devices |= out->device; + * adev->out_device = out->device; * select_output_device(adev); * This is because out_set_parameters() with a route is not * guaranteed to be called after an output stream is opened. */ @@ -3408,11 +3412,13 @@ static int adev_set_voice_volume(struct audio_hw_device *dev, float volume) { struct tuna_audio_device *adev = (struct tuna_audio_device *)dev; + pthread_mutex_lock(&adev->lock); adev->voice_volume = volume; if (adev->mode == AUDIO_MODE_IN_CALL) ril_set_call_volume(&adev->ril, SOUND_TYPE_VOICE, volume); + pthread_mutex_unlock(&adev->lock); return 0; } @@ -3528,7 +3534,7 @@ static int adev_open_input_stream(struct audio_hw_device *dev, in->dev = ladev; in->standby = 1; - in->device = devices; + in->device = devices & ~AUDIO_DEVICE_BIT_IN; *stream_in = &in->stream; return 0; @@ -3585,29 +3591,6 @@ static int adev_close(hw_device_t *device) return 0; } -static uint32_t adev_get_supported_devices(const struct audio_hw_device *dev) -{ - return (/* OUT */ - AUDIO_DEVICE_OUT_EARPIECE | - AUDIO_DEVICE_OUT_SPEAKER | - AUDIO_DEVICE_OUT_WIRED_HEADSET | - AUDIO_DEVICE_OUT_WIRED_HEADPHONE | - AUDIO_DEVICE_OUT_AUX_DIGITAL | - AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET | - AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET | - AUDIO_DEVICE_OUT_ALL_SCO | - AUDIO_DEVICE_OUT_DEFAULT | - /* IN */ - AUDIO_DEVICE_IN_COMMUNICATION | - AUDIO_DEVICE_IN_AMBIENT | - AUDIO_DEVICE_IN_BUILTIN_MIC | - AUDIO_DEVICE_IN_WIRED_HEADSET | - AUDIO_DEVICE_IN_AUX_DIGITAL | - AUDIO_DEVICE_IN_BACK_MIC | - AUDIO_DEVICE_IN_ALL_SCO | - AUDIO_DEVICE_IN_DEFAULT); -} - static int adev_open(const hw_module_t* module, const char* name, hw_device_t** device) { @@ -3622,11 +3605,10 @@ static int adev_open(const hw_module_t* module, const char* name, return -ENOMEM; adev->hw_device.common.tag = HARDWARE_DEVICE_TAG; - adev->hw_device.common.version = AUDIO_DEVICE_API_VERSION_1_0; + adev->hw_device.common.version = AUDIO_DEVICE_API_VERSION_2_0; adev->hw_device.common.module = (struct hw_module_t *) module; adev->hw_device.common.close = adev_close; - adev->hw_device.get_supported_devices = adev_get_supported_devices; adev->hw_device.init_check = adev_init_check; adev->hw_device.set_voice_volume = adev_set_voice_volume; adev->hw_device.set_master_volume = adev_set_master_volume; @@ -3732,7 +3714,8 @@ static int adev_open(const hw_module_t* module, const char* name, pthread_mutex_lock(&adev->lock); set_route_by_array(adev->mixer, defaults, 1); adev->mode = AUDIO_MODE_NORMAL; - adev->devices = AUDIO_DEVICE_OUT_SPEAKER | AUDIO_DEVICE_IN_BUILTIN_MIC; + adev->out_device = AUDIO_DEVICE_OUT_SPEAKER; + adev->in_device = AUDIO_DEVICE_IN_BUILTIN_MIC & ~AUDIO_DEVICE_BIT_IN; select_output_device(adev); adev->pcm_modem_dl = NULL; diff --git a/bluetooth/bdroid_buildcfg.h b/bluetooth/bdroid_buildcfg.h new file mode 100644 index 0000000..5c61b6c --- /dev/null +++ b/bluetooth/bdroid_buildcfg.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _BDROID_BUILDCFG_H +#define _BDROID_BUILDCFG_H + +#define BTM_DEF_LOCAL_NAME "Galaxy Nexus 2" + +#endif @@ -143,9 +143,6 @@ PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \ frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml -PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\ -packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml) - # Melfas touchscreen firmware PRODUCT_COPY_FILES += \ device/samsung/tuna/mms144_ts_rev31.fw:system/vendor/firmware/mms144_ts_rev31.fw \ @@ -194,7 +191,6 @@ PRODUCT_PACKAGES += \ # Filesystem management tools PRODUCT_PACKAGES += \ - make_ext4fs \ e2fsck \ setup_fs diff --git a/dumpstate/dumpstate.c b/dumpstate/dumpstate.c index 2858b2c..61602e4 100644 --- a/dumpstate/dumpstate.c +++ b/dumpstate/dumpstate.c @@ -38,4 +38,5 @@ void dumpstate_board() dump_file("fsa9480 device_type", "/sys/bus/i2c/drivers/fsa9480/4-0025/device_type"); dump_file("fsa9480 control", "/sys/bus/i2c/drivers/fsa9480/4-0025/control"); dump_file("tiler 2x1 map", "/d/tiler/map/2x1"); + dump_file("wlan", "/sys/module/bcmdhd/parameters/info_string"); }; diff --git a/init.tuna.rc b/init.tuna.rc index 070ab1d..530330f 100755 --- a/init.tuna.rc +++ b/init.tuna.rc @@ -1,17 +1,25 @@ import init.tuna.usb.rc -on early-init - export EXTERNAL_STORAGE /storage/sdcard0 - mkdir /storage 0050 system sdcard_r - mkdir /storage/sdcard0 0000 system system - # for backwards compatibility - symlink /storage/sdcard0 /sdcard - symlink /storage/sdcard0 /mnt/sdcard +on init + # See storage config details at http://source.android.com/tech/storage/ + mkdir /mnt/shell/sdcard0 0700 shell shell + mkdir /storage/sdcard0 0000 root root + + export EXTERNAL_STORAGE /storage/sdcard0 + export ADB_EXTERNAL_STORAGE /mnt/shell/sdcard0/0 + export MULTIUSER_EXTERNAL_STORAGE /mnt/shell/sdcard0 + + # Support legacy paths + symlink /storage/sdcard0 /sdcard + symlink /storage/sdcard0 /mnt/sdcard + + # Save bugreports as owner + export BUGREPORT_WRITE_PATH /mnt/shell/sdcard0/0 + export BUGREPORT_READ_PATH /storage/sdcard0 on post-fs-data - # we will remap this as /storage/sdcard0 with the sdcard fuse tool - mkdir /data/media 0770 media_rw media_rw - chown media_rw media_rw /data/media + mkdir /data/media 0770 media_rw media_rw + mkdir /data/misc/wifi 0770 wifi wifi mkdir /data/misc/wifi/sockets 0770 wifi wifi mkdir /data/misc/dhcp 0770 dhcp dhcp @@ -157,11 +165,9 @@ service smc_pa_wvdrm /system/bin/smc_pa_ctrl \ group drmrpc oneshot -# create virtual SD card at /storage/sdcard0, based on the /data/media directory -# daemon will drop to user/group system/media_rw after initializing -# underlying files in /data/media will be created with user and group media_rw (1023) -service sdcard /system/bin/sdcard /data/media 1023 1023 - class late_start +# virtual sdcard daemon running as media_rw (1023) +service sdcard /system/bin/sdcard /data/media /mnt/shell/sdcard0 1023 1023 + class late_start service p2p_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf -N \ Binary files differdiff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml index f85627b..2a08cac 100644 --- a/overlay/frameworks/base/core/res/res/values/config.xml +++ b/overlay/frameworks/base/core/res/res/values/config.xml @@ -213,7 +213,7 @@ bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this should be empty. --> <string-array translatable="false" name="config_tether_bluetooth_regexs"> - <item>"bnep\\d"</item> + <item>"bt-pan"</item> </string-array> <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering --> @@ -234,11 +234,9 @@ <bool name="config_ui_enableFadingMarquee">false</bool> - <!-- Package name providing network location support. --> - <string name="config_networkLocationProviderPackageName" translatable="false">com.google.android.location</string> - - <!-- Package name providing geocoder API support. --> - <string name="config_geocodeProviderPackageName" translatable="false">com.google.android.location</string> + <string-array name="config_overlay_locationProviderPackageNames" translatable="false"> + <item>com.google.android.location</item> + </string-array> <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> <bool name="config_intrusiveNotificationLed">true</bool> diff --git a/overlay/packages/apps/Settings/res/values-cs/arrays.xml b/overlay/packages/apps/Settings/res/values-cs/arrays.xml index 266d10e..265da14 100644 --- a/overlay/packages/apps/Settings/res/values-cs/arrays.xml +++ b/overlay/packages/apps/Settings/res/values-cs/arrays.xml @@ -21,11 +21,11 @@ <resources xmlns:android="http://schemas.android.com/apk/res/android" xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> <string-array name="screen_timeout_entries"> - <item msgid="5314770629356662739">"15 s."</item> - <item msgid="8672738773876256432">"30 s."</item> - <item msgid="465923292941002466">"1 min."</item> - <item msgid="7955177189296850016">"2 min."</item> - <item msgid="1244255986255344525">"5 min."</item> - <item msgid="294890536998091748">"10 min."</item> + <item msgid="5314770629356662739">"15 sekund"</item> + <item msgid="8672738773876256432">"30 sekund"</item> + <item msgid="465923292941002466">"1 minuta"</item> + <item msgid="7955177189296850016">"2 minuty"</item> + <item msgid="1244255986255344525">"5 minut"</item> + <item msgid="294890536998091748">"10 minut"</item> </string-array> </resources> diff --git a/overlay/packages/apps/Settings/res/values-fa/arrays.xml b/overlay/packages/apps/Settings/res/values-fa/arrays.xml index bf95ca8..71915a9 100644 --- a/overlay/packages/apps/Settings/res/values-fa/arrays.xml +++ b/overlay/packages/apps/Settings/res/values-fa/arrays.xml @@ -21,11 +21,11 @@ <resources xmlns:android="http://schemas.android.com/apk/res/android" xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> <string-array name="screen_timeout_entries"> - <item msgid="5314770629356662739">"15 ثانیه"</item> - <item msgid="8672738773876256432">"30 ثانیه"</item> - <item msgid="465923292941002466">"1 دقیقه"</item> - <item msgid="7955177189296850016">"2 دقیقه"</item> - <item msgid="1244255986255344525">"5 دقیقه"</item> - <item msgid="294890536998091748">"10 دقیقه"</item> + <item msgid="5314770629356662739">"۱۵ ثانیه"</item> + <item msgid="8672738773876256432">"۳۰ ثانیه"</item> + <item msgid="465923292941002466">"۱ دقیقه"</item> + <item msgid="7955177189296850016">"۲ دقیقه"</item> + <item msgid="1244255986255344525">"۵ دقیقه"</item> + <item msgid="294890536998091748">"۱۰ دقیقه"</item> </string-array> </resources> diff --git a/overlay/packages/apps/Settings/res/values-nb/arrays.xml b/overlay/packages/apps/Settings/res/values-nb/arrays.xml index c5db781..a365905 100644 --- a/overlay/packages/apps/Settings/res/values-nb/arrays.xml +++ b/overlay/packages/apps/Settings/res/values-nb/arrays.xml @@ -23,9 +23,9 @@ <string-array name="screen_timeout_entries"> <item msgid="5314770629356662739">"15 sekunder"</item> <item msgid="8672738773876256432">"30 sekunder"</item> - <item msgid="465923292941002466">"Ett minutt"</item> - <item msgid="7955177189296850016">"To minutter"</item> - <item msgid="1244255986255344525">"Fem minutter"</item> - <item msgid="294890536998091748">"Ti minutter"</item> + <item msgid="465923292941002466">"1 minutt"</item> + <item msgid="7955177189296850016">"2 minutter"</item> + <item msgid="1244255986255344525">"5 minutter"</item> + <item msgid="294890536998091748">"10 minutter"</item> </string-array> </resources> diff --git a/releasetools.py b/releasetools.py index 056c7dc..b9dabdb 100644 --- a/releasetools.py +++ b/releasetools.py @@ -102,7 +102,7 @@ def WriteRadio(info, target_radio_img, source_radio_img=None): if tf.sha1 == sf.sha1: print "radio image unchanged; skipping" else: - diff = common.Difference(tf, sf) + diff = common.Difference(tf, sf, diff_program="bsdiff") common.ComputeDifferences([diff]) _, _, d = diff.GetPatch() if d is None or len(d) > tf.size * common.OPTIONS.patch_threshold: |