#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

DEVICE_FOLDER := device/samsung/tuna

# TI Enhancement Settings (Part 1)
#OMAP_ENHANCEMENT := true
#OMAP_ENHANCEMENT_BURST_CAPTURE := true
#OMAP_ENHANCEMENT_S3D := true
#OMAP_ENHANCEMENT_CPCAM := true
#OMAP_ENHANCEMENT_VTC := true
#OMAP_ENHANCEMENT_MULTIGPU := true
#BOARD_USE_TI_ENHANCED_DOMX := true

PRODUCT_VENDOR_KERNEL_HEADERS := $(DEVICE_FOLDER)/kernel-headers

TARGET_SPECIFIC_HEADER_PATH := $(DEVICE_FOLDER)/include

# Setup custom omap4xxx defines
BOARD_USE_CUSTOM_LIBION := true

# Camera
#TI_OMAP4_CAMERAHAL_VARIANT := true
#TI_CAMERAHAL_USES_LEGACY_DOMX_DCC := true
#TI_CAMERAHAL_MAX_CAMERAS_SUPPORTED := 2
#TI_CAMERAHAL_TREAT_FRONT_AS_BACK := true
#TI_CAMERAHAL_DEBUG_ENABLED := true
#TI_CAMERAHAL_VERBOSE_DEBUG_ENABLED := true
#TI_CAMERAHAL_DEBUG_FUNCTION_NAMES := true
USE_CAMERA_STUB := true

# Use the non-open-source parts, if they're present
-include vendor/samsung/tuna/BoardConfigVendor.mk

TARGET_NO_BOOTLOADER := true
TARGET_NO_RADIOIMAGE := true

TARGET_BOARD_PLATFORM := omap4
TARGET_BOARD_INFO_FILE := $(DEVICE_FOLDER)/board-info.txt
TARGET_BOOTLOADER_BOARD_NAME := tuna

# Processor
TARGET_BOARD_OMAP_CPU := 4460
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_CPU_SMP := true
TARGET_CPU_VARIANT := cortex-a9
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon

# Kernel
BOARD_KERNEL_BASE := 0x80000000
# BOARD_KERNEL_CMDLINE :=
TARGET_KERNEL_CONFIG := tuna_defconfig
TARGET_KERNEL_SOURCE := kernel/samsung/tuna

# EGL
USE_OPENGL_RENDERER := true

BOARD_USE_TI_DUCATI_H264_PROFILE := true

# External SGX Module
SGX_MODULES:
	make clean -C $(DEVICE_FOLDER)/pvr-source/eurasiacon/build/linux2/omap4430_android
	cp $(TARGET_KERNEL_SOURCE)/drivers/video/omap2/omapfb/omapfb.h $(KERNEL_OUT)/drivers/video/omap2/omapfb/omapfb.h
	make -j8 -C $(DEVICE_FOLDER)/pvr-source/eurasiacon/build/linux2/omap4430_android ARCH=arm KERNEL_CROSS_COMPILE=arm-eabi- CROSS_COMPILE=arm-eabi- KERNELDIR=$(KERNEL_OUT) TARGET_PRODUCT="blaze_tablet" BUILD=release TARGET_SGX=540 PLATFORM_VERSION=4.0
	mv $(KERNEL_OUT)/../../target/kbuild/pvrsrvkm_sgx540_120.ko $(KERNEL_MODULES_OUT)
	$(ARM_EABI_TOOLCHAIN)/arm-eabi-strip --strip-unneeded $(KERNEL_MODULES_OUT)/pvrsrvkm_sgx540_120.ko

TARGET_KERNEL_MODULES += SGX_MODULES

# TI Enhancement Settings (Part 2)
ifdef BOARD_USE_TI_ENHANCED_DOMX
    BOARD_USE_TI_DUCATI_H264_PROFILE := true
    BOARD_USE_TI_DOMX_LOW_SECURE_HEAP := true
    COMMON_GLOBAL_CFLAGS += -DENHANCED_DOMX
    ENHANCED_DOMX := true
    TI_CUSTOM_DOMX_PATH := $(DEVICE_FOLDER)/domx
    DOMX_PATH := $(DEVICE_FOLDER)/domx
else
    DOMX_PATH := hardware/ti/omap4xxx/domx
endif

ifdef OMAP_ENHANCEMENT
    COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT -DTARGET_OMAP4 -DFORCE_SCREENSHOT_CPU_PATH
endif

ifdef OMAP_ENHANCEMENT_BURST_CAPTURE
    COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT_BURST_CAPTURE
endif

ifdef OMAP_ENHANCEMENT_S3D
    COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT_S3D
endif

ifdef OMAP_ENHANCEMENT_CPCAM
    COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT_CPCAM
    PRODUCT_MAKEFILES += $(LOCAL_DIR)/sdk_addon/ti_omap_addon.mk
endif

ifdef OMAP_ENHANCEMENT_VTC
    COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT_VTC
endif

ifdef USE_ITTIAM_AAC
    COMMON_GLOBAL_CFLAGS += -DUSE_ITTIAM_AAC
endif

ifdef OMAP_ENHANCEMENT_MULTIGPU
    COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT_MULTIGPU
endif

# Include HDCP keys
BOARD_CREATE_TUNA_HDCP_KEYS_SYMLINK := true

# Force the screenshot path to CPU consumer
COMMON_GLOBAL_CFLAGS += -DFORCE_SCREENSHOT_CPU_PATH

# set if the target supports FBIO_WAITFORVSYNC
TARGET_HAS_WAITFORVSYNC := true

# device-specific extensions to the updater binary
TARGET_RECOVERY_UPDATER_LIBS += librecovery_updater_tuna
TARGET_RELEASETOOLS_EXTENSIONS := $(DEVICE_FOLDER)

# Filesystem
TARGET_USERIMAGES_USE_EXT4 := true
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 685768704
BOARD_USERDATAIMAGE_PARTITION_SIZE := 14539537408
BOARD_FLASH_BLOCK_SIZE := 4096

# No sync framework for this device...
TARGET_RUNNING_WITHOUT_SYNC_FRAMEWORK := true

#TARGET_PROVIDES_INIT_RC := true
#TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true

# Wifi
BOARD_WLAN_DEVICE                := bcmdhd
BOARD_WLAN_DEVICE_REV            := bcm4330_b2
WPA_SUPPLICANT_VERSION           := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER      := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_HOSTAPD_DRIVER             := NL80211
BOARD_HOSTAPD_PRIVATE_LIB        := lib_driver_cmd_bcmdhd
WIFI_DRIVER_FW_PATH_PARAM        := "/sys/module/bcmdhd/parameters/firmware_path"
#WIFI_DRIVER_MODULE_PATH         := "/system/lib/modules/bcmdhd.ko"
WIFI_DRIVER_FW_PATH_STA          := "/vendor/firmware/fw_bcmdhd.bin"
WIFI_DRIVER_FW_PATH_AP           := "/vendor/firmware/fw_bcmdhd_apsta.bin"
WIFI_BAND                        := 802_11_ABG

# Bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_BCM := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(DEVICE_FOLDER)/bluetooth

BOARD_HAL_STATIC_LIBRARIES := libdumpstate.tuna

# Security
BOARD_USES_SECURE_SERVICES := true

# SELinux
BOARD_SEPOLICY_DIRS += \
        $(DEVICE_FOLDER)/sepolicy

BOARD_SEPOLICY_UNION += \
        genfs_contexts \
        file_contexts

# Recovery
RECOVERY_FSTAB_VERSION := 2
TARGET_RECOVERY_FSTAB = $(DEVICE_FOLDER)/rootdir/fstab.tuna
TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888"
TARGET_RECOVERY_UI_LIB := librecovery_ui_tuna
BOARD_RECOVERY_SWIPE := true
BOARD_HAS_NO_SELECT_BUTTON := true
BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_15x24.h\"