From 772f20abb0a3a0979c440114bf3a1cff5b3cef03 Mon Sep 17 00:00:00 2001 From: cvpcs Date: Wed, 2 Jun 2010 11:02:31 -0500 Subject: initial import of bash 4.1 --- doc/article.ms | 1114 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1114 insertions(+) create mode 100644 doc/article.ms (limited to 'doc/article.ms') diff --git a/doc/article.ms b/doc/article.ms new file mode 100644 index 0000000..517155a --- /dev/null +++ b/doc/article.ms @@ -0,0 +1,1114 @@ +.de SE \" start example +.sp .5 +.RS +.ft CR +.nf +.. +.de EE \" end example +.fi +.sp .5 +.RE +.ft R +.. +.TL +Bash \- The GNU shell* +.AU +Chet Ramey +Case Western Reserve University +chet@po.cwru.edu +.FS +*An earlier version of this article appeared in The Linux Journal. +.FE +.NH 1 +Introduction +.PP +.B Bash +is the shell, or command language interpreter, +that will appear in the GNU operating system. +The name is an acronym for +the \*QBourne-Again SHell\*U, a pun on Steve Bourne, the author +of the direct ancestor of the current +.UX +shell \fI/bin/sh\fP, +which appeared in the Seventh Edition Bell Labs Research version +of \s-1UNIX\s+1. +.PP +Bash is an \fBsh\fP\-compatible shell that incorporates useful +features from the Korn shell (\fBksh\fP) and the C shell (\fBcsh\fP), +described later in this article. It is ultimately intended to be a +conformant implementation of the IEEE POSIX Shell and Utilities +specification (IEEE Working Group 1003.2). It offers functional +improvements over sh for both interactive and programming use. +.PP +While the GNU operating system will most likely include a version +of the Berkeley shell csh, Bash will be the default shell. +Like other GNU software, Bash is quite portable. It currently runs +on nearly every version of +.UX +and a few other operating systems \- an independently-supported +port exists for OS/2, and there are rumors of ports to DOS and +Windows NT. Ports to \s-1UNIX\s+1-like systems such as QNX and Minix +are part of the distribution. +.PP +The original author of Bash +was Brian Fox, an employee of the Free Software Foundation. The +current developer and maintainer is Chet Ramey, a volunteer who +works at Case Western Reserve University. +.NH 1 +What's POSIX, anyway? +.PP +.I POSIX +is a name originally coined by Richard Stallman for a family of open +system standards based on \s-1UNIX\s+1. There are a number of aspects of \s-1UNIX\s+1 +under consideration for standardization, from the basic system services +at the system call and C library level to applications and tools to system +administration and management. Each area of standardization is +assigned to a working group in the 1003 series. +.PP +The POSIX Shell and Utilities standard has been developed by IEEE Working +Group 1003.2 (POSIX.2).\(dd +.FS +\(ddIEEE, \fIIEEE Standard for Information Technology -- Portable +Operating System Interface (POSIX) Part 2: Shell and Utilities\fP, +1992. +.FE +It concentrates on the command interpreter +interface and utility programs +commonly executed from the command line or by other programs. +An initial version of the standard has been +approved and published by the IEEE, and work is currently underway to +update it. +There are four primary areas of work in the 1003.2 standard: +.IP \(bu +Aspects of the shell's syntax and command language. +A number of special builtins such as +.B cd +and +.B exec +are being specified as part of the shell, since their +functionality usually cannot be implemented by a separate executable; +.IP \(bu +A set of utilities to be called by shell scripts and applications. +Examples are programs like +.I sed, +.I tr, +and +.I awk. +Utilities commonly implemented as shell builtins +are described in this section, such as +.B test +and +.B kill . +An expansion of this section's scope, termed the User Portability +Extension, or UPE, has standardized interactive programs such as +.I vi +and +.I mailx; +.IP \(bu +A group of functional interfaces to services provided by the +shell, such as the traditional \f(CRsystem()\fP +C library function. There are functions to perform shell word +expansions, perform filename expansion (\fIglobbing\fP), obtain values +of POSIX.2 system configuration variables, retrieve values of +environment variables (\f(CRgetenv()\fP\^), and other services; +.IP \(bu +A suite of \*Qdevelopment\*U utilities such as +.I c89 +(the POSIX.2 version of \fIcc\fP), +and +.I yacc. +.PP +Bash is concerned with the aspects of the shell's behavior +defined by POSIX.2. The shell command language has of +course been standardized, including the basic flow control +and program execution constructs, I/O redirection and +pipelining, argument handling, variable expansion, and quoting. +The +.I special +builtins, which must be implemented as part of the shell to +provide the desired functionality, are specified as being +part of the shell; examples of these are +.B eval +and +.B export . +Other utilities appear in the sections of POSIX.2 not +devoted to the shell which are commonly (and in some +cases must be) implemented as builtin commands, such as +.B read +and +.B test . +POSIX.2 also specifies aspects of the shell's +interactive behavior as part of +the UPE, including job control and command line editing. +Interestingly enough, only \fIvi\fP-style line editing commands +have been standardized; \fIemacs\fP editing commands were left +out due to objections. +.PP +While POSIX.2 includes much of what the shell has traditionally +provided, some important things have been omitted as being +\*Qbeyond its scope.\*U There is, for instance, no mention of +a difference between a +.I login +shell and any other interactive shell (since POSIX.2 does not +specify a login program). No fixed startup files are defined, +either \- the standard does not mention +.I .profile . +.NH 1 +Basic Bash features +.PP +Since the Bourne shell +provides Bash with most of its philosophical underpinnings, +Bash inherits most of its features and functionality from sh. +Bash implements all of the traditional sh flow +control constructs (\fIfor\fP, \fIif\fP, \fIwhile\fP, etc.). +All of the Bourne shell builtins, including those not specified in +the POSIX.2 standard, appear in Bash. Shell \fIfunctions\fP, +introduced in the SVR2 version of the Bourne shell, +are similar to shell scripts, but are defined using a special +syntax and are executed in the same process as the calling shell. +Bash has shell functions +which behave in a fashion upward-compatible with sh functions. +There are certain shell +variables that Bash interprets in the same way as sh, such as +.B PS1 , +.B IFS , +and +.B PATH . +Bash implements essentially the same grammar, parameter and +variable expansion semantics, redirection, and quoting as the +Bourne shell. Where differences appear between the POSIX.2 +standard and traditional sh behavior, Bash follows POSIX. +.PP +The Korn Shell (\fBksh\fP) is a descendent of the Bourne shell written +at AT&T Bell Laboratories by David Korn\(dg. It provides a number of +useful features that POSIX and Bash have adopted. Many of the +interactive facilities in POSIX.2 have their roots in the ksh: +for example, the POSIX and ksh job control facilities are nearly +identical. Bash includes features from the Korn Shell for both +interactive use and shell programming. For programming, Bash provides +variables such as +.B RANDOM +and +.B REPLY , +the +.B typeset +builtin, +the ability to remove substrings from variables based on patterns, +and shell arithmetic. +.FS +\(dgMorris Bolsky and David Korn, \fIThe KornShell Command and +Programming Language\fP, Prentice Hall, 1989. +.FE +.B RANDOM +expands to a random number each time it is referenced; assigning a +value to +.B RANDOM +seeds the random number generator. +.B REPLY +is the default variable used by the +.B read +builtin when no variable names are supplied as arguments. +The +.B typeset +builtin is used to define variables and give them attributes +such as \fBreadonly\fP. +Bash arithmetic allows the evaluation of an expression and the +substitution of the result. Shell variables may be used as operands, +and the result of an expression may be assigned to a variable. +Nearly all of the operators from the C language are available, +with the same precedence rules: +.SE +$ echo $((3 + 5 * 32)) +163 +.EE +.LP +For interactive use, Bash implements ksh-style aliases and builtins +such as +.B fc +(discussed below) and +.B jobs . +Bash aliases allow a string to be substituted for a command name. +They can be used to create a mnemonic for a \s-1UNIX\s+1 command +name (\f(CRalias del=rm\fP), to expand a single word to a complex command +(\f(CRalias news='xterm -g 80x45 -title trn -e trn -e -S1 -N &'\fP), or to +ensure that a command is invoked with a basic set of options +(\f(CRalias ls="/bin/ls -F"\fP). +.PP +The C shell (\fBcsh\fP)\(dg, originally written by Bill Joy while at +Berkeley, is widely used and quite popular for its interactive +facilities. Bash includes a csh-compatible history expansion +mechanism (\*Q! history\*U), brace expansion, access to a stack +of directories via the +.B pushd , +.B popd , +and +.B dirs +builtins, and tilde expansion, to generate users' home directories. +Tilde expansion has also been adopted by both the Korn Shell and +POSIX.2. +.FS +\(dgBill Joy, An Introduction to the C Shell, \fIUNIX User's Supplementary +Documents\fP, University of California at Berkeley, 1986. +.FE +.PP +There were certain areas in which POSIX.2 felt standardization +was necessary, but no existing implementation provided the proper +behavior. The working group invented and standardized functionality +in these areas, which Bash implements. The +.B command +builtin was invented so that shell functions could be written to +replace builtins; it makes the capabilities of the builtin +available to the function. The reserved word \*Q!\*U was added +to negate the return value of a command or pipeline; it was nearly +impossible to express \*Qif not x\*U cleanly using the sh language. +There exist multiple incompatible implementations of the +.B test +builtin, which tests files for type and other attributes and performs +arithmetic and string comparisons. +POSIX considered none of these correct, so the standard +behavior was specified in terms of the number of arguments to the +command. POSIX.2 dictates exactly what will happen when four or +fewer arguments are given to +.B test , +and leaves the behavior undefined when more arguments are supplied. +Bash uses the POSIX.2 algorithm, which was conceived by David Korn. +.NH 2 +Features not in the Bourne Shell +.PP +There are a number of minor differences between Bash and the +version of sh present on most other versions of \s-1UNIX\s+1. The majority +of these are due to the POSIX standard, but some are the result of +Bash adopting features from other shells. For instance, Bash +includes the new \*Q!\*U reserved word, the +.B command +builtin, the ability of the +.B read +builtin to correctly return a line ending with a backslash, symbolic +arguments to the +.B umask +builtin, variable substring removal, a way to get the length of a variable, +and the new algorithm for the +.B test +builtin from the POSIX.2 standard, none of which appear in sh. +.PP +Bash also implements the \*Q$(...)\*U command substitution syntax, +which supersedes the sh `...` construct. +The \*Q$(...)\*U construct expands to the output of the command +contained within the +parentheses, with trailing newlines removed. The sh syntax is +accepted for backwards compatibility, but the \*Q$(...)\*U form +is preferred because its quoting rules are much simpler and it +is easier to nest. +.PP +The Bourne shell does not provide such features as brace expansion, +the ability +to define a variable and a function with the same name, local variables +in shell functions, the ability to enable and disable individual +builtins or write a function to replace a builtin, or a means to +export a shell function to a child process. +.PP +Bash has closed +a long-standing shell security hole by not using the +.B $IFS +variable to split each word read by the shell, but splitting only +the results of expansion (ksh and the 4.4 BSD sh have fixed this +as well). Useful behavior such as a means to abort +execution of a script read with the \*Q.\*U command using the +\fBreturn\fP builtin or automatically +exporting variables in the shell's environment to children is also +not present in the Bourne shell. Bash provides a much more powerful +environment for both interactive use and programming. +.NH 1 +Bash-specific Features +.PP +This section details a few of the features which make Bash unique. +Most of them provide improved interactive use, but a few programming +improvements are present as well. Full descriptions of these +features can be found in the Bash documentation. +.NH 2 +Startup Files +.PP +Bash executes startup files differently than other shells. The Bash +behavior is a compromise between the csh principle of startup files +with fixed names executed for each shell and the sh +\*Qminimalist\*U behavior. An interactive instance of Bash started +as a login shell reads and executes +.I ~/.bash_profile +(the file .bash_profile in the user's home directory), if it exists. +An interactive non-login shell reads and executes +.I ~/.bashrc . +A non-interactive shell (one begun to execute a shell script, for +example) reads no fixed startup file, but uses the value of the variable +.B $ENV , +if set, as the name of a startup file. The ksh practice of reading +.B $ENV +for every shell, with the accompanying difficulty of defining the +proper variables and functions for interactive and non-interactive +shells or having the file read only for interactive shells, was +considered too complex. Ease of use won out here. Interestingly, +the next release of ksh will change to reading +.B $ENV +only for interactive shells. +.NH 2 +New Builtin Commands +.PP +There are a few builtins which are new or have been extended in Bash. +The +.B enable +builtin allows builtin commands to be turned on and off arbitrarily. +To use the version of +.I echo +found in a user's search path rather than the Bash builtin, +\f(CRenable -n echo\fP suffices. The +.B help +builtin provides +quick synopses of the shell facilities without requiring +access to a manual page. +.B Builtin +is similar to +.B command +in that it bypasses shell functions and directly executes builtin +commands. Access to a csh-style stack of directories is provided +via the +.B pushd , +.B popd , +and +.B dirs +builtins. +.B Pushd +and +.B popd +insert and remove directories from the stack, respectively, and +.B dirs +lists the stack contents. On systems that allow fine-grained control +of resources, the +.B ulimit +builtin can be used to tune these settings. +.B Ulimit +allows a user to control, +among other things, whether core dumps are to be generated, +how much memory the shell or a child process is allowed to allocate, +and how large a file created by a child process can grow. The +.B suspend +command will stop the shell process when job control is active; most +other shells do not allow themselves to be stopped like that. +.B Type, +the Bash answer to +.B which +and +.B whence, +shows what will happen when a word is typed as a command: +.SE +$ type export +export is a shell builtin +$ type -t export +builtin +$ type bash +bash is /bin/bash +$ type cd +cd is a function +cd () +{ + builtin cd ${1+"$@"} && xtitle $HOST: $PWD +} +.EE +.LP +Various +modes tell what a command word is (reserved word, alias, function, builtin, +or file) or which version of a command will be executed based on +a user's search path. Some of this functionality has been adopted +by POSIX.2 and folded into the +.B command +utility. +.NH 2 +Editing and Completion +.PP +One area in which Bash shines is command line editing. Bash uses the +.I readline +library to read and edit lines when interactive. Readline is a +powerful and flexible input facility that a user can configure to +individual tastes. It allows lines to be edited using either emacs +or vi commands, where those commands are appropriate. The full +capability of emacs is not present \- there is no way to execute +a named command with M-x, for instance \- but the existing commands +are more than adequate. The vi mode is compliant with +the command line editing standardized by POSIX.2. +.PP +Readline is fully customizable. In addition to the basic commands +and key bindings, the library allows users to define additional +key bindings using a startup file. The +.I inputrc +file, which defaults to the file +.I ~/.inputrc , +is read each time readline initializes, permitting users to +maintain a consistent interface across a set of programs. Readline +includes an extensible interface, so each program using the +library can add its own bindable commands and program-specific +key bindings. Bash uses this facility to add bindings +that perform history expansion or shell word expansions on the current +input line. +.PP +Readline interprets a number of +variables which further tune its behavior. Variables +exist to control whether or not eight-bit characters are directly +read as input or converted to meta-prefixed key sequences (a +meta-prefixed key sequence consists of the character with the +eighth bit zeroed, preceded by the +.I meta-prefix +character, usually escape, which selects an alternate keymap), to +decide whether to output characters with the eighth bit set +directly or as a meta-prefixed key sequence, whether or not to +wrap to a new screen line when a line being edited is longer than +the screen width, the keymap to which subsequent key bindings should +apply, or even what happens when readline wants to +ring the terminal's bell. All of these variables can be set in +the inputrc file. +.PP +The startup file understands a set of C +preprocessor-like conditional constructs which allow variables or +key bindings to be assigned based on the application using readline, +the terminal currently being used, or the editing mode. Users can +add program-specific bindings to make their lives easier: I have +bindings that let me edit the value of +.B $PATH +and double-quote the current or previous word: +.SE +# Macros that are convenient for shell interaction +$if Bash +# edit the path +"\eC-xp": "PATH=${PATH}\ee\eC-e\eC-a\eef\eC-f" +# prepare to type a quoted word -- insert open and close double +# quotes and move to just after the open quote +"\eC-x\e"": "\e"\e"\eC-b" +# Quote the current or previous word +"\eC-xq": "\eeb\e"\eef\e"" +$endif +.EE +.LP +There is a readline +command to re-read the file, so users can edit the file, change +some bindings, and begin to use them almost immediately. +.PP +Bash implements the +.B bind +builtin for more dyamic control of readline than the startup file +permits. +.B Bind +is used in several ways. In +.I list +mode, it can display the current key bindings, list all the +readline editing directives available for binding, list which keys +invoke a given directive, or output the current set of key +bindings in a format that can be incorporated directly into an inputrc +file. In +.I batch +mode, it reads a series of key bindings directly from a file and +passes them to readline. In its most common usage, +.B bind +takes a single string and passes it directly to readline, which +interprets the line as if it had just been read from the inputrc file. +Both key bindings and variable assignments may appear in the +string given to +.B bind . +.PP +The readline library also provides an interface for \fIword completion\fP. +When the +.I completion +character (usually TAB) is typed, readline looks at the word currently +being entered and computes the set of filenames of which the current +word is a valid prefix. +If there is only one possible completion, the +rest of the characters are inserted directly, otherwise the +common prefix of the set of filenames is added to the current word. +A second TAB character entered immediately after a non-unique +completion causes readline to list the possible completions; there is +an option to have the list displayed immediately. +Readline provides hooks so that applications can provide specific types +of completion before the default filename completion is attempted. +This is quite flexible, though it is not completely user-programmable. +Bash, for example, can complete filenames, command names (including aliases, +builtins, shell reserved words, shell functions, and executables found +in the file system), shell variables, usernames, and hostnames. It +uses a set of heuristics that, while not perfect, is generally quite +good at determining what type of completion to attempt. +.NH 2 +History +.PP +Access to the list of commands previously entered (the \fIcommand history\fP) +is provided jointly by Bash and the readline library. Bash provides +variables (\fB$HISTFILE\fP, \fB$HISTSIZE\fP, and \fB$HISTCONTROL\fP) +and the +.B history +and +.B fc +builtins to manipulate the history list. +The value of +.B $HISTFILE +specifes the file where Bash writes the command history on exit and +reads it on startup. +.B $HISTSIZE +is used to limit the number of commands saved in the history. +.B $HISTCONTROL +provides a crude form of control over which commands are saved on +the history list: a value of +.I ignorespace +means to not save commands which begin with a space; a value of +.I ignoredups +means to not save commands identical to the last command saved. +\fB$HISTCONTROL\fP was named \fB$history_control\fP in earlier +versions of Bash; the old name is still accepted for backwards +compatibility. The +.B history +command can read or write files containing the history list +and display the current list contents. The +.B fc +builtin, adopted from POSIX.2 and the Korn Shell, allows display +and re-execution, with optional editing, +of commands from the history list. The readline +library offers a set of commands to search the history list for +a portion of the current input line or a string typed by the user. +Finally, the +.I history +library, generally incorporated directly into the readline library, +implements a facility for history recall, expansion, and re-execution +of previous commands very similar to csh +(\*Qbang history\*U, so called because the exclamation point +introduces a history substitution): +.SE +$ echo a b c d e +a b c d e +$ !! f g h i +echo a b c d e f g h i +a b c d e f g h i +$ !-2 +echo a b c d e +a b c d e +$ echo !-2:1-4 +echo a b c d +a b c d +.EE +.LP +The command history is only +saved when the shell is interactive, so it is not available for use +by shell scripts. +.NH 2 +New Shell Variables +.PP +There are a number of convenience variables that Bash interprets +to make life easier. These include +.B FIGNORE , +which is a set of filename suffixes identifying files to exclude when +completing filenames; +.B HOSTTYPE , +which is automatically set to a string describing the type of +hardware on which Bash is currently executing; +.B command_oriented_history , +which directs Bash to save all lines of a multiple-line +command such as a \fIwhile\fP or \fIfor\fP loop in a single +history entry, allowing easy re-editing; and +.B IGNOREEOF , +whose value indicates the number of consecutive EOF characters that +an interactive shell will read before exiting \- an easy way to keep +yourself from being logged out accidentally. The +.B auto_resume +variable alters the way the shell treats simple command names: +if job control is active, and this variable is set, single-word +simple commands without redirections cause the shell to first +look for and restart a suspended job with that name before +starting a new process. +.NH 2 +Brace Expansion +.PP +Since sh offers no convenient way to generate arbitrary strings that +share a common prefix or suffix (filename expansion requires that +the filenames exist), Bash implements \fIbrace expansion\fP, a +capability picked up from csh. +Brace expansion is similar to filename expansion, but the strings +generated need not correspond to existing files. A brace expression +consists of an optional +.I preamble , +followed by a pair of braces enclosing a series of comma-separated +strings, and an optional +.I postamble . +The preamble is prepended to each string within the braces, and the +postamble is then appended to each resulting string: +.SE +$ echo a{d,c,b}e +ade ace abe +.EE +.LP +As this example demonstrates, the results of brace expansion are not +sorted, as they are by filename expansion. +.NH 2 +Process Substitution +.PP +On systems that can support it, Bash provides a facility known as +\fIprocess substitution\fP. Process substitution is similar to command +substitution in that its specification includes a command to execute, +but the shell does not collect the command's output and insert it into +the command line. Rather, Bash opens a pipe to the command, which +is run in the background. The shell uses named pipes (FIFOs) or the +.I /dev/fd +method of naming open files to expand the process +substitution to a filename which connects to the pipe when opened. +This filename becomes the result of the expansion. Process substitution +can be used to compare the outputs of two different versions of an +application as part of a regression test: +.SE +$ cmp <(old_prog) <(new_prog) +.EE +.NH 2 +Prompt Customization +.PP +One of the more popular interactive features that Bash provides is +the ability to customize the prompt. Both +.B $PS1 +and +.B $PS2, +the primary and secondary prompts, are expanded before being +displayed. Parameter and variable expansion is performed when +the prompt string is expanded, so any shell variable can be +put into the prompt (e.g., +.B $SHLVL , +which indicates how deeply the current shell is nested). +Bash specially interprets characters in the prompt string +preceded by a backslash. Some of these backslash escapes are +replaced with +the current time, the date, the current working directory, +the username, and the command number or history number of the command +being entered. There is even a backslash escape to cause the shell +to change its prompt when running as root after an \fIsu\fP. +Before printing each primary prompt, Bash expands the variable +.B $PROMPT_COMMAND +and, if it has a value, executes the expanded value as a command, +allowing additional prompt customization. For example, this assignment +causes the current user, the current host, the time, the last +component of the current working directory, the level of shell +nesting, and the history number of the current command to be embedded +into the primary prompt: +.SE +$ PS1='\eu@\eh [\et] \eW($SHLVL:\e!)\e$ ' +chet@odin [21:03:44] documentation(2:636)$ cd .. +chet@odin [21:03:54] src(2:637)$ +.EE +.LP +The string being assigned is surrounded by single quotes so that if +it is exported, the value of +.B $SHLVL +will be updated by a child shell: +.SE +chet@odin [21:17:35] src(2:638)$ export PS1 +chet@odin [21:17:40] src(2:639)$ bash +chet@odin [21:17:46] src(3:696)$ +.EE +.LP +The \fP\e$\fP escape is displayed +as \*Q\fB$\fP\*U when running as a normal user, but as \*Q\fB#\fP\*U when +running as root. +.NH 2 +File System Views +.PP +Since Berkeley introduced symbolic links in 4.2 BSD, one of their most +annoying properties has been the \*Qwarping\*U to a completely +different area of the file system when using +.B cd , +and the resultant non-intuitive behavior of \*Q\fBcd ..\fP\*U. +The \s-1UNIX\s+1 kernel treats symbolic links +.I physically . +When the kernel is translating a pathname +in which one component is a symbolic link, it replaces all or part +of the pathname while processing the link. If the contents of the symbolic +link begin with a slash, the kernel replaces the +pathname entirely; if not, the link contents replace +the current component. In either case, the symbolic link +is visible. If the link value is an absolute pathname, +the user finds himself in a completely different part of the file +system. +.PP +Bash provides a +.I logical +view of the file system. In this default mode, command and filename +completion and builtin commands such as +.B cd +and +.B pushd +which change the current working directory transparently follow +symbolic links as if they were directories. +The +.B $PWD +variable, which holds the shell's idea of the current working directory, +depends on the path used to reach the directory rather than its +physical location in the local file system hierarchy. For example: +.SE +$ cd /usr/local/bin +$ echo $PWD +/usr/local/bin +$ pwd +/usr/local/bin +$ /bin/pwd +/net/share/sun4/local/bin +$ cd .. +$ pwd +/usr/local +$ /bin/pwd +/net/share/sun4/local +$ cd .. +$ pwd +/usr +$ /bin/pwd +/usr +.EE +.LP +One problem with this, of +course, arises when programs that do not understand the shell's logical +notion of the file system interpret \*Q..\*U differently. This generally +happens when Bash completes filenames containing \*Q..\*U according to a +logical hierarchy which does not correspond to their physical location. +For users who find this troublesome, a corresponding +.I physical +view of the file system is available: +.SE +$ cd /usr/local/bin +$ pwd +/usr/local/bin +$ set -o physical +$ pwd +/net/share/sun4/local/bin +.EE +.NH 2 +Internationalization +.PP +One of the most significant improvements in version 1.13 of Bash was the +change to \*Qeight-bit cleanliness\*U. Previous versions used the +eighth bit of characters to mark whether or not they were +quoted when performing word expansions. While this did not affect +the majority of users, most of whom used only seven-bit ASCII characters, +some found it confining. Beginning with version 1.13, Bash +implemented a different quoting mechanism that did not alter the +eighth bit of characters. This allowed Bash +to manipulate files with \*Qodd\*U characters in their names, but +did nothing to help users enter those names, so +version 1.13 introduced changes to readline that +made it eight-bit clean as well. Options exist that force readline to +attach no special significance to characters with the eighth bit set +(the default behavior is to convert these characters to meta-prefixed +key sequences) and to output these characters without conversion to +meta-prefixed sequences. These changes, along with the expansion of +keymaps to a full eight bits, enable readline to work with most of the +ISO-8859 family of character sets, used by many European countries. +.NH 2 +POSIX Mode +.PP +Although Bash is intended to be POSIX.2 conformant, there are areas in +which the default behavior is not compatible with the standard. For +users who wish to operate in a strict POSIX.2 environment, Bash +implements a \fIPOSIX mode\fP. When this mode is active, Bash modifies +its default operation where it differs from POSIX.2 to match the +standard. POSIX mode is entered when Bash is started with the +.B -posix +option. This feature is also available as an option to the +\fBset\fP builtin, \fBset -o posix\fP. +For compatibility with other GNU software that attempts to be POSIX.2 +compliant, Bash also enters POSIX mode if the variable +.B $POSIXLY_CORRECT +is set when Bash is started or assigned a value during execution. +.B $POSIX_PEDANTIC +is accepted as well, to be compatible with some older GNU utilities. +When Bash is started in POSIX mode, for example, it sources the +file named by the value of +.B $ENV +rather than the \*Qnormal\*U startup files, and does not allow +reserved words to be aliased. +.NH 1 +New Features and Future Plans +.PP +There are several features introduced in the current +version of Bash, version 1.14, and a number under consideration +for future releases. This section will briefly detail the new +features in version 1.14 and describe several features +that may appear in later versions. +.NH 2 +New Features in Bash-1.14 +.PP +The new features available in Bash-1.14 answer several of +the most common requests for enhancements. Most notably, there +is a mechanism +for including non-visible character sequences in prompts, such as +those which cause a terminal to print characters in different +colors or in standout mode. There was nothing preventing the use +of these sequences in earlier +versions, but the readline redisplay algorithm assumed each +character occupied physical screen space and would wrap lines +prematurely. +.PP +Readline has a few new +variables, several new bindable commands, and some additional +emacs mode default key bindings. A new history search +mode has been implemented: in this mode, readline searches the +history for lines beginning with the characters between the +beginning of the current line and the cursor. The existing readline +incremental search commands no longer match identical lines more +than once. +Filename completion now expands variables in directory names. +The history expansion facilities are now nearly +completely csh-compatible: missing modifiers have been added and +history substitution has been extended. +.PP +Several of the features described earlier, such as +.B "set -o posix" +and +.B $POSIX_PEDANTIC , +are new in version 1.14. +There is a new shell variable, +.B OSTYPE , +to which Bash assigns a value that identifies the +version of \s-1UNIX\s+1 it's +running on (great for putting architecture-specific binary directories +into the \fB$PATH\fP). +Two variables have been renamed: +.B $HISTCONTROL +replaces +.B $history_control , +and +.B $HOSTFILE +replaces +.B $hostname_completion_file . +In both cases, the old names are accepted for backwards +compatibility. The ksh +.I select +construct, which allows the generation of simple menus, +has been implemented. New capabilities have been added +to existing variables: +.B $auto_resume +can now take values of +.I exact +or +.I substring , +and +.B $HISTCONTROL +understands the value +.I ignoreboth , +which combines the two previously acceptable values. The +.B dirs +builtin has acquired options to print out specific members of the +directory stack. The +.B $nolinks +variable, which forces a physical view of the file system, +has been superseded by the +.B \-P +option to the +.B set +builtin (equivalent to \fBset -o physical\fP); the variable is retained +for backwards compatibility. The version string contained in +.B $BASH_VERSION +now includes an indication of the patch level as well as the +\*Qbuild version\*U. +Some little-used features have +been removed: the +.B bye +synonym for +.B exit +and the +.B $NO_PROMPT_VARS +variable are gone. There is now an organized test suite that can be +run as a regression test when building a new version of Bash. +.PP +The documentation has been thoroughly overhauled: +there is a new manual page on the readline library and the \fIinfo\fP +file has been updated to reflect the current version. +As always, as many bugs as possible have been fixed, although some +surely remain. +.NH 2 +Other Features +.PP +There are a few features that I hope to include in later Bash releases. +Some are based on work already done in other shells. +.PP +In addition to simple variables, a future release of Bash will include +one-dimensional arrays, using the ksh +implementation of arrays as a model. Additions to the ksh syntax, +such as \fIvarname\fP=( ... ) to assign a list of words directly to +an array and a mechanism to allow +the +.B read +builtin to read a list of values directly into an array, would be +desirable. Given those extensions, the ksh +.B "set \-A" +syntax may not be worth supporting (the +.B \-A +option assigns a list of values to an array, but is a rather +peculiar special case). +.PP +Some shells include a means of \fIprogrammable\fP word +completion, where the user specifies on a per-command basis how the +arguments of the command are to be treated when completion is attempted: +as filenames, hostnames, executable files, and so on. The other +aspects of the current Bash implementation could remain as-is; the +existing heuristics would still be valid. Only when completing the +arguments to a simple command would the programmable completion be +in effect. +.PP +It would also be nice to give the user finer-grained +control over which commands are saved onto the history list. One +proposal is for a variable, tentatively named +.B HISTIGNORE , +which would contain a colon-separated list of commands. Lines beginning +with these commands, after the restrictions of +.B $HISTCONTROL +have been applied, would not be placed onto the history list. The +shell pattern-matching capabilities could also be available when +specifying the contents of +.B $HISTIGNORE . +.PP +One thing that newer shells such as +.B wksh +(also known as +.B dtksh ) +provide is a command to dynamically load code +implementing additional builtin commands into a running shell. +This new builtin would take an object file or shared library +implementing the \*Qbody\*U of the +builtin (\fIxxx_builtin()\fP for those familiar with Bash internals) +and a structure containing the name of the new command, the function +to call when the new builtin is invoked (presumably defined in the +shared object specified as an argument), and the documentation to be +printed by the +.B help +command (possibly present in the shared object as well). It would +manage the details of extending the internal table of builtins. +.PP +A few other builtins would also be desirable: two are the POSIX.2 +.B getconf +command, which prints the values of system configuration variables +defined by POSIX.2, and a +.B disown +builtin, which causes a shell running +with job control active to \*Qforget about\*U one or more +background jobs in its internal jobs table. Using +.B getconf , +for example, a user could retrieve a value for +.B $PATH +guaranteed to find all of the POSIX standard utilities, or +find out how long filenames may be in the file system containing +a specified directory. +.PP +There are no implementation timetables for any of these features, nor +are there concrete plans to include them. If anyone has comments on +these proposals, feel free to send me electronic mail. +.NH 1 +Reflections and Lessons Learned +.PP +The lesson that has been repeated most often during Bash +development is that there are dark corners in the Bourne shell, +and people use all of them. In the original description of the +Bourne shell, quoting and the shell grammar are both poorly +specified and incomplete; subsequent descriptions have not helped +much. The grammar presented in Bourne's paper describing +the shell distributed with the Seventh Edition of \s-1UNIX\s+1\(dg +is so far off that it does not allow the command \f(CWwho|wc\fP. +In fact, as Tom Duff states: +.QP +Nobody really knows what the +Bourne shell's grammar is. Even examination of the source code is +little help.\(dd +.FS +\(dgS. R. Bourne, \*QUNIX Time-Sharing System: The UNIX Shell\*U, +\fIBell System Technical Journal\fP, 57(6), July-August, 1978, pp. 1971-1990. +.FE +.FS +\(ddTom Duff, \*QRc \- A Shell for Plan 9 and \s-1UNIX\s+1 systems\*U, +\fIProc. of the Summer 1990 EUUG Conference\fP, London, July, 1990, +pp. 21-33. +.FE +.LP +The POSIX.2 standard includes a \fIyacc\fP grammar that comes close +to capturing the Bourne shell's behavior, but it disallows some +constructs which sh accepts without complaint \- and there are +scripts out there that use them. It took a few versions and +several bug reports before Bash implemented sh-compatible quoting, +and there are still some \*Qlegal\*U sh constructs which Bash flags as +syntax errors. Complete sh compatibility is a tough nut. +.PP +The shell is bigger and slower than I would like, though the current +version is substantially faster than previously. The readline library +could stand a substantial rewrite. A hand-written parser to replace +the current \fIyacc\fP-generated one would probably result in a speedup, +and would solve one glaring problem: the shell could parse +commands in \*Q$(...)\*U constructs +as they are entered, rather than reporting errors when the construct +is expanded. +.PP +As always, there is some chaff to go with the wheat. +Areas of duplicated functionality need to be cleaned +up. There are several cases where Bash treats a variable specially to +enable functionality available another way (\fB$notify\fP vs. +\fBset -o notify\fP and \fB$nolinks\fP vs. \fBset -o physical\fP, for +instance); the special treatment of the variable name should probably +be removed. A few more things could stand removal; the +.B $allow_null_glob_expansion +and +.B $glob_dot_filenames +variables are of particularly questionable value. +The \fB$[...]\fP arithmetic evaluation syntax is redundant now that +the POSIX-mandated \fB$((...))\fP construct has been implemented, +and could be deleted. +It would be nice if the text output by the +.B help +builtin were external to the shell rather than compiled into it. +The behavior enabled by +.B $command_oriented_history , +which causes the shell to attempt to save all lines of a multi-line +command in a single history entry, should be made the default and +the variable removed. +.NH 1 +Availability +.PP +As with all other +GNU software, Bash is available for anonymous FTP from +.I prep.ai.mit.edu:/pub/gnu +and from other GNU software mirror sites. The current version is in +.I bash-1.14.1.tar.gz +in that directory. Use +.I archie +to find the nearest archive site. The +latest version is always available for FTP from +.I bash.CWRU.Edu:/pub/dist. +Bash documentation is available for FTP from +.I bash.CWRU.Edu:/pub/bash. +.PP +The Free Software Foundation sells tapes and CD-ROMs +containing Bash; send electronic mail to +\f(CRgnu@prep.ai.mit.edu\fP or call \f(CR+1-617-876-3296\fP +for more information. +.PP +Bash is also distributed with several versions of \s-1UNIX\s+1-compatible +systems. It is included as /bin/sh and /bin/bash on several Linux +distributions (more about the difference in a moment), and as contributed +software in BSDI's BSD/386* and FreeBSD. +.FS +*BSD/386 is a trademark of Berkeley Software Design, Inc. +.FE +.PP +The Linux distribution deserves special mention. There are two +configurations included in the standard Bash distribution: a +\*Qnormal\*U configuration, in which all of the standard features +are included, and a \*Qminimal\*U configuration, which omits job +control, aliases, history and command line editing, the directory +stack and +.B pushd/popd/dirs, +process substitution, prompt string special character decoding, and the +.I select +construct. This minimal version is designed to be a drop-in replacement +for the traditional \s-1UNIX\s+1 /bin/sh, and is included as the Linux +/bin/sh in several packagings. +.NH 1 +Conclusion +.PP +Bash is a worthy successor to sh. +It is sufficiently portable +to run on nearly every version of \s-1UNIX\s+1 from +4.3 BSD to SVR4.2, and several \s-1UNIX\s+1 workalikes. +It is robust enough to replace sh on most of those systems, +and provides more functionality. It has several thousand regular users, +and their feedback has helped to make it as good as it is today \- a +testament to the benefits of free software. -- cgit v1.1