diff options
Diffstat (limited to 'bta/include/bta_api.h')
| -rw-r--r-- | bta/include/bta_api.h | 1712 |
1 files changed, 1712 insertions, 0 deletions
diff --git a/bta/include/bta_api.h b/bta/include/bta_api.h new file mode 100644 index 0000000..8d7b71b --- /dev/null +++ b/bta/include/bta_api.h @@ -0,0 +1,1712 @@ +/***************************************************************************** +** +** Name: bta_api.h +** +** Description: This is the public interface file for BTA, Widcomm's +** Bluetooth application layer for mobile phones. +** +** Copyright (c) 2003-2010, Broadcom Corp., All Rights Reserved. +** Broadcom Bluetooth Core. Proprietary and confidential. +** +*****************************************************************************/ +#ifndef BTA_API_H +#define BTA_API_H + +#include "data_types.h" +#include "bt_target.h" +#include "bt_types.h" +#include "btm_api.h" +#include "uipc_msg.h" + +#if BLE_INCLUDED == TRUE +#include "btm_ble_api.h" +#endif + +/***************************************************************************** +** Constants and data types +*****************************************************************************/ + +/* Status Return Value */ +#define BTA_SUCCESS 0 /* Successful operation. */ +#define BTA_FAILURE 1 /* Generic failure. */ +#define BTA_PENDING 2 /* API cannot be completed right now */ +#define BTA_BUSY 3 +#define BTA_NO_RESOURCES 4 +#define BTA_WRONG_MODE 5 + +typedef UINT8 tBTA_STATUS; + +/* + * Service ID + * + * NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID, + * make sure that the correct security ID of the new service from Security service definitions (btm_api.h) + * should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c. + */ + +#define BTA_RES_SERVICE_ID 0 /* Reserved */ +#define BTA_SPP_SERVICE_ID 1 /* Serial port profile. */ +#define BTA_DUN_SERVICE_ID 2 /* Dial-up networking profile. */ +#define BTA_FAX_SERVICE_ID 3 /* Fax profile. */ +#define BTA_LAP_SERVICE_ID 4 /* LAN access profile. */ +#define BTA_HSP_SERVICE_ID 5 /* Headset profile. */ +#define BTA_HFP_SERVICE_ID 6 /* Hands-free profile. */ +#define BTA_OPP_SERVICE_ID 7 /* Object push */ +#define BTA_FTP_SERVICE_ID 8 /* File transfer */ +#define BTA_CTP_SERVICE_ID 9 /* Cordless Terminal */ +#define BTA_ICP_SERVICE_ID 10 /* Intercom Terminal */ +#define BTA_SYNC_SERVICE_ID 11 /* Synchronization */ +#define BTA_BPP_SERVICE_ID 12 /* Basic printing profile */ +#define BTA_BIP_SERVICE_ID 13 /* Basic Imaging profile */ +#define BTA_PANU_SERVICE_ID 14 /* PAN User */ +#define BTA_NAP_SERVICE_ID 15 /* PAN Network access point */ +#define BTA_GN_SERVICE_ID 16 /* PAN Group Ad-hoc networks */ +#define BTA_SAP_SERVICE_ID 17 /* SIM Access profile */ +#define BTA_A2DP_SERVICE_ID 18 /* Advanced audio distribution */ +#define BTA_AVRCP_SERVICE_ID 19 /* A/V remote control */ +#define BTA_HID_SERVICE_ID 20 /* HID */ +#define BTA_VDP_SERVICE_ID 21 /* Video distribution */ +#define BTA_PBAP_SERVICE_ID 22 /* PhoneBook Access Server*/ +#define BTA_HSP_HS_SERVICE_ID 23 /* HFP HS role */ +#define BTA_HFP_HS_SERVICE_ID 24 /* HSP HS role */ +#define BTA_MAP_SERVICE_ID 25 /* Message Access Profile */ +#define BTA_MN_SERVICE_ID 26 /* Message Notification Service */ +#define BTA_HDP_SERVICE_ID 27 /* Health Device Profile */ +#define BTA_PCE_SERVICE_ID 28 /* PhoneBook Access Client*/ + +#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE +/* BLE profile service ID */ +#define BTA_BLE_SERVICE_ID 29 /* GATT profile */ + +// btla-specific ++ +#define BTA_USER_SERVICE_ID 30 /* User requested UUID */ + +#define BTA_MAX_SERVICE_ID 31 +// btla-specific -- +#else +#define BTA_USER_SERVICE_ID 29 /* User requested UUID */ +#define BTA_MAX_SERVICE_ID 30 +#endif +/* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1) + * are used by BTA JV */ +#define BTA_FIRST_JV_SERVICE_ID (BTM_SEC_SERVICE_FIRST_EMPTY + 1) +#define BTA_LAST_JV_SERVICE_ID (BTM_SEC_MAX_SERVICES - 1) + +typedef UINT8 tBTA_SERVICE_ID; + +/* Service ID Mask */ +#define BTA_RES_SERVICE_MASK 0x00000001 /* Reserved */ +#define BTA_SPP_SERVICE_MASK 0x00000002 /* Serial port profile. */ +#define BTA_DUN_SERVICE_MASK 0x00000004 /* Dial-up networking profile. */ +#define BTA_FAX_SERVICE_MASK 0x00000008 /* Fax profile. */ +#define BTA_LAP_SERVICE_MASK 0x00000010 /* LAN access profile. */ +#define BTA_HSP_SERVICE_MASK 0x00000020 /* HSP AG role. */ +#define BTA_HFP_SERVICE_MASK 0x00000040 /* HFP AG role */ +#define BTA_OPP_SERVICE_MASK 0x00000080 /* Object push */ +#define BTA_FTP_SERVICE_MASK 0x00000100 /* File transfer */ +#define BTA_CTP_SERVICE_MASK 0x00000200 /* Cordless Terminal */ +#define BTA_ICP_SERVICE_MASK 0x00000400 /* Intercom Terminal */ +#define BTA_SYNC_SERVICE_MASK 0x00000800 /* Synchronization */ +#define BTA_BPP_SERVICE_MASK 0x00001000 /* Print server */ +#define BTA_BIP_SERVICE_MASK 0x00002000 /* Basic Imaging */ +#define BTA_PANU_SERVICE_MASK 0x00004000 /* PAN User */ +#define BTA_NAP_SERVICE_MASK 0x00008000 /* PAN Network access point */ +#define BTA_GN_SERVICE_MASK 0x00010000 /* PAN Group Ad-hoc networks */ +#define BTA_SAP_SERVICE_MASK 0x00020000 /* PAN Group Ad-hoc networks */ +#define BTA_A2DP_SERVICE_MASK 0x00040000 /* Advanced audio distribution */ +#define BTA_AVRCP_SERVICE_MASK 0x00080000 /* A/V remote control */ +#define BTA_HID_SERVICE_MASK 0x00100000 /* HID */ +#define BTA_VDP_SERVICE_MASK 0x00200000 /* Video distribution */ +#define BTA_PBAP_SERVICE_MASK 0x00400000 /* Phone Book Server */ +#define BTA_HSP_HS_SERVICE_MASK 0x00800000 /* HFP HS role */ +#define BTA_HFP_HS_SERVICE_MASK 0x01000000 /* HSP HS role */ +#define BTA_MAS_SERVICE_MASK 0x02000000 /* Message Access Profile */ +#define BTA_MN_SERVICE_MASK 0x04000000 /* Message Notification Profile */ +#define BTA_HL_SERVICE_MASK 0x08000000 /* Health Device Profile */ +#define BTA_PCE_SERVICE_MASK 0x10000000 /* Phone Book Client */ + +#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE +#define BTA_BLE_SERVICE_MASK 0x20000000 /* GATT based service */ +// btla-specific ++ +#define BTA_USER_SERVICE_MASK 0x40000000 /* Message Notification Profile */ +// btla-specific -- +#else +// btla-specific ++ +#define BTA_USER_SERVICE_MASK 0x20000000 /* Message Notification Profile */ +// btla-specific -- +#endif + +#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE +#define BTA_ALL_SERVICE_MASK 0x3FFFFFFF /* All services supported by BTA. */ +#else +#define BTA_ALL_SERVICE_MASK 0x1FFFFFFF /* All services supported by BTA. */ +#endif + +typedef UINT32 tBTA_SERVICE_MASK; + +/* extended service mask, including mask with one or more GATT UUID */ +typedef struct +{ + tBTA_SERVICE_MASK srvc_mask; + UINT8 num_uuid; + tBT_UUID *p_uuid; +}tBTA_SERVICE_MASK_EXT; + +/* Security Setting Mask */ +#define BTA_SEC_NONE BTM_SEC_NONE /* No security. */ +#define BTA_SEC_AUTHORIZE (BTM_SEC_IN_AUTHORIZE ) /* Authorization required (only needed for out going connection )*/ +#define BTA_SEC_AUTHENTICATE (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */ +#define BTA_SEC_ENCRYPT (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */ + +typedef UINT8 tBTA_SEC; + +/* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only device modes */ + +#define BTA_DM_IGNORE 0xFF + + +/* Discoverable Modes */ +#define BTA_DM_NON_DISC BTM_NON_DISCOVERABLE /* Device is not discoverable. */ +#define BTA_DM_GENERAL_DISC BTM_GENERAL_DISCOVERABLE /* General discoverable. */ +#define BTA_DM_LIMITED_DISC BTM_LIMITED_DISCOVERABLE /* Limited discoverable. */ + +// btla-specific ++ +typedef UINT16 tBTA_DM_DISC; +// btla-specific -- + +/* Connectable Modes */ +#define BTA_DM_NON_CONN BTM_NON_CONNECTABLE /* Device is not connectable. */ +#define BTA_DM_CONN BTM_CONNECTABLE /* Device is connectable. */ + +// btla-specific ++ +typedef UINT16 tBTA_DM_CONN; +// btla-specific -- + +/* Pairable Modes */ +#define BTA_DM_PAIRABLE 1 +#define BTA_DM_NON_PAIRABLE 0 + +/* Connectable Paired Only Mode */ +#define BTA_DM_CONN_ALL 0 +#define BTA_DM_CONN_PAIRED 1 + +/* Inquiry Modes */ +#define BTA_DM_GENERAL_INQUIRY BTM_GENERAL_INQUIRY /* Perform general inquiry. */ +#define BTA_DM_LIMITED_INQUIRY BTM_LIMITED_INQUIRY /* Perform limited inquiry. */ + +#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) +#define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE +#define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */ +#define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */ +#endif +typedef UINT8 tBTA_DM_INQ_MODE; + +/* Inquiry Filter Type */ +#define BTA_DM_INQ_CLR BTM_CLR_INQUIRY_FILTER /* Clear inquiry filter. */ +#define BTA_DM_INQ_DEV_CLASS BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class. */ +#define BTA_DM_INQ_BD_ADDR BTM_FILTER_COND_BD_ADDR /* Filter on a specific BD address. */ + +typedef UINT8 tBTA_DM_INQ_FILT; + +/* Authorize Response */ +#define BTA_DM_AUTH_PERM 0 /* Authorized for future connections to the service */ +#define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */ +#define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */ + +typedef UINT8 tBTA_AUTH_RESP; + +/* M/S preferred roles */ +#define BTA_ANY_ROLE 0x00 +#define BTA_MASTER_ROLE_PREF 0x01 +#define BTA_MASTER_ROLE_ONLY 0x02 + +typedef UINT8 tBTA_PREF_ROLES; + +enum +{ + + BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might + support "role switch during connection" for + an incoming connection, when it already has + another connection in master role */ + BTA_DM_PARTIAL_SCATTERNET, /* Device supports partial scatternet. It can have + simulateous connection in Master and Slave roles + for short period of time */ + BTA_DM_FULL_SCATTERNET /* Device can have simultaneous connection in master + and slave roles */ + +}; + + +/* Inquiry filter device class condition */ +typedef struct +{ + DEV_CLASS dev_class; /* device class of interest */ + DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of interest */ +} tBTA_DM_COD_COND; + + +/* Inquiry Filter Condition */ +typedef union +{ + BD_ADDR bd_addr; /* BD address of device to filter. */ + tBTA_DM_COD_COND dev_class_cond; /* Device class filter condition */ +} tBTA_DM_INQ_COND; + +/* Inquiry Parameters */ +typedef struct +{ + tBTA_DM_INQ_MODE mode; /* Inquiry mode, limited or general. */ + UINT8 duration; /* Inquiry duration in 1.28 sec units. */ + UINT8 max_resps; /* Maximum inquiry responses. Set to zero for unlimited responses. */ + BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */ + tBTA_DM_INQ_FILT filter_type; /* Filter condition type. */ + tBTA_DM_INQ_COND filter_cond; /* Filter condition data. */ +} tBTA_DM_INQ; + +typedef struct +{ + UINT8 bta_dm_eir_min_name_len; /* minimum length of local name when it is shortened */ +#if (BTA_EIR_CANNED_UUID_LIST == TRUE) + UINT8 bta_dm_eir_uuid16_len; /* length of 16-bit UUIDs */ + UINT8 *bta_dm_eir_uuid16; /* 16-bit UUIDs */ +#else + UINT32 uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */ +#endif + INT8 *bta_dm_eir_inq_tx_power; /* Inquiry TX power */ + UINT8 bta_dm_eir_flag_len; /* length of flags in bytes */ + UINT8 *bta_dm_eir_flags; /* flags for EIR */ + UINT8 bta_dm_eir_manufac_spec_len; /* length of manufacturer specific in bytes */ + UINT8 *bta_dm_eir_manufac_spec; /* manufacturer specific */ +} tBTA_DM_EIR_CONF; + +#if BLE_INCLUDED == TRUE +/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ +#define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG +#define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG +#define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT +#define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG +#define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK +#define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK + +#define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME +#define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS +#define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU +#define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR +#define BTA_BLE_AD_BIT_ATTR BTM_BLE_AD_BIT_ATTR +#define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE +#define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE +#define BTA_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL +#define BTA_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA +#define BTA_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA +typedef UINT16 tBTA_BLE_AD_MASK; + +/* slave preferred connection interval range */ +typedef struct +{ + UINT16 low; + UINT16 hi; + +}tBTA_BLE_INT_RANGE; + +/* Service tag supported in the device */ +typedef struct +{ + UINT8 num_service; + BOOLEAN list_cmpl; + UINT16 *p_uuid; +}tBTA_BLE_SERVICE; + +/* attribute data */ +typedef struct +{ + UINT16 uuid; + UINT16 data_len; + UINT8 *p_data; +}tBTA_BLE_ATTR; + +#define BTA_BLE_NUM_AD_ATTR_MAX BTM_BLE_NUM_AD_ATTR_MAX + +/* attribute list contained in adv data */ +typedef struct +{ + UINT8 num_attr; + tBTA_BLE_ATTR attr_list[BTA_BLE_NUM_AD_ATTR_MAX]; +}tBTA_BLE_ATTR_DATA; + +typedef struct +{ + UINT8 len; + UINT8 *p_val; +}tBTA_BLE_MANU; + +typedef struct +{ + tBTA_BLE_MANU manu; /* manufactuer data */ + tBTA_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ + tBTA_BLE_SERVICE services; /* services */ + tBTA_BLE_ATTR_DATA attr; /* attribute data */ + UINT8 flag; +}tBTA_BLE_ADV_DATA; + +/* These are the fields returned in each device adv packet. It +** is returned in the results callback if registered. +*/ +typedef struct +{ + UINT8 conn_mode; + tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ + UINT8 flag; + UINT8 tx_power_level; + UINT8 remote_name_len; + UINT8 *p_remote_name; + tBTA_BLE_ATTR_DATA attr_data; + tBTA_BLE_SERVICE service; +} tBTA_BLE_INQ_DATA; +#endif + +typedef INT8 tBTA_DM_RSSI_VALUE; +typedef UINT8 tBTA_DM_LINK_QUALITY_VALUE; + + +/* signal strength mask */ +#define BTA_SIG_STRENGTH_RSSI_MASK 1 +#define BTA_SIG_STRENGTH_LINK_QUALITY_MASK 2 + +typedef UINT8 tBTA_SIG_STRENGTH_MASK; + + +/* Security Callback Events */ +#define BTA_DM_ENABLE_EVT 0 /* Enable Event */ +#define BTA_DM_DISABLE_EVT 1 /* Disable Event */ +#define BTA_DM_PIN_REQ_EVT 2 /* PIN request. */ +#define BTA_DM_AUTH_CMPL_EVT 3 /* Authentication complete indication. */ +#define BTA_DM_AUTHORIZE_EVT 4 /* Authorization request. */ +#define BTA_DM_LINK_UP_EVT 5 /* Connection UP event */ +#define BTA_DM_LINK_DOWN_EVT 6 /* Connection DOWN event */ +#define BTA_DM_SIG_STRENGTH_EVT 7 /* Signal strength for bluetooth connection */ +#define BTA_DM_BUSY_LEVEL_EVT 8 /* System busy level */ +#define BTA_DM_BOND_CANCEL_CMPL_EVT 9 /* Bond cancel complete indication */ +#define BTA_DM_SP_CFM_REQ_EVT 10 /* Simple Pairing User Confirmation request. */ +#define BTA_DM_SP_KEY_NOTIF_EVT 11 /* Simple Pairing Passkey Notification */ +#define BTA_DM_SP_RMT_OOB_EVT 12 /* Simple Pairing Remote OOB Data request. */ +#define BTA_DM_SP_KEYPRESS_EVT 13 /* Key press notification event. */ +#define BTA_DM_ROLE_CHG_EVT 14 /* Role Change event. */ +#define BTA_DM_BLE_KEY_EVT 15 /* BLE SMP key event for peer device keys */ +#define BTA_DM_BLE_SEC_REQ_EVT 16 /* BLE SMP security request */ +#define BTA_DM_BLE_PASSKEY_NOTIF_EVT 17 /* SMP passkey notification event */ +#define BTA_DM_BLE_PASSKEY_REQ_EVT 18 /* SMP passkey request event */ +#define BTA_DM_BLE_OOB_REQ_EVT 19 /* SMP OOB request event */ +#define BTA_DM_BLE_LOCAL_IR_EVT 20 /* BLE local IR event */ +#define BTA_DM_BLE_LOCAL_ER_EVT 21 /* BLE local ER event */ +// btla-specific ++ +#define BTA_DM_BLE_AUTH_CMPL_EVT 22 /* BLE Auth complete */ +// btla-specific -- + +typedef UINT8 tBTA_DM_SEC_EVT; + +/* Structure associated with BTA_DM_ENABLE_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address of local device. */ + tBTA_STATUS status; +} tBTA_DM_ENABLE; + +/* Structure associated with BTA_DM_PIN_REQ_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + BD_NAME bd_name; /* Name of peer device. */ + DEV_CLASS dev_class; /* Class of Device */ +} tBTA_DM_PIN_REQ; + +/* BLE related definition */ + +#define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10) +#define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x)) +#define BTA_DM_AUTH_SMP_PASSKEY_FAIL BTA_DM_AUTH_CONVERT_SMP_CODE (SMP_PASSKEY_ENTRY_FAIL) +#define BTA_DM_AUTH_SMP_OOB_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL) +#define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL) +#define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR) +#define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT) +#define BTA_DM_AUTH_SMP_ENC_KEY_SIZE (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE) +#define BTA_DM_AUTH_SMP_INVALID_CMD (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD) +#define BTA_DM_AUTH_SMP_UNKNOWN_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN) +#define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT (BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS) +#define BTA_DM_AUTH_SMP_INTERNAL_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR) +#define BTA_DM_AUTH_SMP_UNKNOWN_IO (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP) +#define BTA_DM_AUTH_SMP_INIT_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL) +#define BTA_DM_AUTH_SMP_CONFIRM_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL) +#define BTA_DM_AUTH_SMP_BUSY (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY) +#define BTA_DM_AUTH_SMP_ENC_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL) +#define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT) + +/* connection parameter boundary value and dummy value */ +#define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN +#define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX +#define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN +#define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX +#define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN +#define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX +#define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX +#define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN +#define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX +#define BTA_DM_BLE_CONN_PARAM_UNDEF BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be overwritten */ + + +#define BTA_LE_KEY_PENC BTM_LE_KEY_PENC /* encryption information of peer device */ +#define BTA_LE_KEY_PID BTM_LE_KEY_PID /* identity key of the peer device */ +#define BTA_LE_KEY_PCSRK BTM_LE_KEY_PCSRK /* peer SRK */ +#define BTA_LE_KEY_LENC BTM_LE_KEY_LENC /* master role security information:div */ +#define BTA_LE_KEY_LID BTM_LE_KEY_LID /* master device ID key */ +#define BTA_LE_KEY_LCSRK BTM_LE_KEY_LCSRK /* local CSRK has been deliver to peer */ +typedef UINT8 tBTA_LE_KEY_TYPE; /* can be used as a bit mask */ + + +typedef tBTM_LE_PENC_KEYS tBTA_LE_PENC_KEYS ; +typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS; +typedef tBTM_LE_LENC_KEYS tBTA_LE_LENC_KEYS ; +typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS ; + +typedef union +{ + tBTA_LE_PENC_KEYS penc_key; /* received peer encryption key */ + tBTA_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */ + BT_OCTET16 pid_key; /* peer device ID key */ + tBTA_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/ + tBTA_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/ +}tBTA_LE_KEY_VALUE; + +#define BTA_BLE_LOCAL_KEY_TYPE_ID 1 +#define BTA_BLE_LOCAL_KEY_TYPE_ER 2 +typedef UINT8 tBTA_DM_BLE_LOCAL_KEY_MASK; + +typedef struct +{ + BT_OCTET16 ir; + BT_OCTET16 irk; + BT_OCTET16 dhk; +}tBTA_BLE_LOCAL_ID_KEYS; + +#define BTA_DM_SEC_GRANTED BTA_SUCCESS +#define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT +#define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT +typedef UINT8 tBTA_DM_BLE_SEC_GRANT; + + +#define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE +#define BTA_DM_BLE_CONN_AUTO BTM_BLE_CONN_AUTO +#define BTA_DM_BLE_CONN_SELECTIVE BTM_BLE_CONN_SELECTIVE +typedef UINT8 tBTA_DM_BLE_CONN_TYPE; + +typedef BOOLEAN (tBTA_DM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); + +/* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* peer address */ + BD_NAME bd_name; /* peer device name */ +} tBTA_DM_BLE_SEC_REQ; + +typedef struct +{ + BD_ADDR bd_addr; /* peer address */ + tBTM_LE_KEY_TYPE key_type; + tBTM_LE_KEY_VALUE key_value; +}tBTA_DM_BLE_KEY; + +/* Structure associated with BTA_DM_AUTH_CMPL_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + BD_NAME bd_name; /* Name of peer device. */ + BOOLEAN key_present; /* Valid link key value in key element */ + LINK_KEY key; /* Link key associated with peer device. */ + UINT8 key_type; /* The type of Link Key */ + BOOLEAN success; /* TRUE of authentication succeeded, FALSE if failed. */ + UINT8 fail_reason; /* The HCI reason/error code for when success=FALSE */ + +} tBTA_DM_AUTH_CMPL; + + +/* Structure associated with BTA_DM_AUTHORIZE_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + BD_NAME bd_name; /* Name of peer device. */ + tBTA_SERVICE_ID service; /* Service ID to authorize. */ +// btla-specific ++ + DEV_CLASS dev_class; +// btla-specific -- +} tBTA_DM_AUTHORIZE; + +/* Structure associated with BTA_DM_LINK_UP_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ +} tBTA_DM_LINK_UP; + +/* Structure associated with BTA_DM_LINK_DOWN_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + UINT8 status; /* connection open/closed */ +} tBTA_DM_LINK_DOWN; + +/* Structure associated with BTA_DM_ROLE_CHG_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + UINT8 new_role; /* the new connection role */ +} tBTA_DM_ROLE_CHG; + +/* Structure associated with BTA_DM_SIG_STRENGTH_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + tBTA_SIG_STRENGTH_MASK mask; /* mask for the values that are valid */ + tBTA_DM_RSSI_VALUE rssi_value; + tBTA_DM_LINK_QUALITY_VALUE link_quality_value; + +} tBTA_DM_SIG_STRENGTH; + +/* Structure associated with BTA_DM_BUSY_LEVEL_EVT */ +typedef struct +{ + UINT8 level; /* when paging or inquiring, level is 10. + Otherwise, the number of ACL links */ +} tBTA_DM_BUSY_LEVEL; + +#define BTA_IO_CAP_OUT BTM_IO_CAP_OUT /* DisplayOnly */ +#define BTA_IO_CAP_IO BTM_IO_CAP_IO /* DisplayYesNo */ +#define BTA_IO_CAP_IN BTM_IO_CAP_IN /* KeyboardOnly */ +#define BTA_IO_CAP_NONE BTM_IO_CAP_NONE /* NoInputNoOutput */ +typedef tBTM_IO_CAP tBTA_IO_CAP; + +#define BTA_AUTH_SP_NO BTM_AUTH_SP_NO /* 0 MITM Protection Not Required - Single Profile/non-bonding + Numeric comparison with automatic accept allowed */ +#define BTA_AUTH_SP_YES BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding + Use IO Capabilities to determine authentication procedure */ +#define BTA_AUTH_AP_NO BTM_AUTH_AP_NO /* 2 MITM Protection Not Required - All Profiles/dedicated bonding + Numeric comparison with automatic accept allowed */ +#define BTA_AUTH_AP_YES BTM_AUTH_AP_YES /* 3 MITM Protection Required - All Profiles/dedicated bonding + Use IO Capabilities to determine authentication procedure */ +#define BTA_AUTH_SPGB_NO BTM_AUTH_SPGB_NO /* 4 MITM Protection Not Required - Single Profiles/general bonding + Numeric comparison with automatic accept allowed */ +#define BTA_AUTH_SPGB_YES BTM_AUTH_SPGB_YES /* 5 MITM Protection Required - Single Profiles/general bonding + Use IO Capabilities to determine authentication procedure */ +typedef tBTM_AUTH_REQ tBTA_AUTH_REQ; + +#define BTA_AUTH_DD_BOND BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */ +#define BTA_AUTH_GEN_BOND BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */ +#define BTA_AUTH_BONDS BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */ + +#define BTA_LE_AUTH_NO_BOND BTM_LE_AUTH_REQ_NO_BOND /* 0*/ +#define BTA_LE_AUTH_BOND BTM_LE_AUTH_REQ_BOND /* 1 << 0 */ +#define BTA_LE_AUTH_REQ_MITM BTM_LE_AUTH_REQ_MITM /* 1 << 2 */ +typedef tBTM_LE_AUTH_REQ tBTA_LE_AUTH_REQ; /* combination of the above bit pattern */ + +#define BTA_OOB_NONE BTM_OOB_NONE +#define BTA_OOB_PRESENT BTM_OOB_PRESENT +#if BTM_OOB_INCLUDED == TRUE +#define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN +#endif +typedef tBTM_OOB_DATA tBTA_OOB_DATA; + +/* Structure associated with BTA_DM_SP_CFM_REQ_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* peer address */ + DEV_CLASS dev_class; /* peer CoD */ + BD_NAME bd_name; /* peer device name */ + UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */ + BOOLEAN just_works; /* TRUE, if "Just Works" association model */ + tBTA_AUTH_REQ loc_auth_req; /* Authentication required for local device */ + tBTA_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */ +} tBTA_DM_SP_CFM_REQ; + +enum +{ + BTA_SP_KEY_STARTED, /* passkey entry started */ + BTA_SP_KEY_ENTERED, /* passkey digit entered */ + BTA_SP_KEY_ERASED, /* passkey digit erased */ + BTA_SP_KEY_CLEARED, /* passkey cleared */ + BTA_SP_KEY_COMPLT /* passkey entry completed */ +}; +typedef UINT8 tBTA_SP_KEY_TYPE; + +/* Structure associated with BTA_DM_SP_KEYPRESS_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* peer address */ + tBTA_SP_KEY_TYPE notif_type; +}tBTA_DM_SP_KEY_PRESS; + +/* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* peer address */ + DEV_CLASS dev_class; /* peer CoD */ + BD_NAME bd_name; /* peer device name */ + UINT32 passkey; /* the numeric value for comparison. If just_works, do not show this number to UI */ +} tBTA_DM_SP_KEY_NOTIF; + +/* Structure associated with BTA_DM_SP_RMT_OOB_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* peer address */ + DEV_CLASS dev_class; /* peer CoD */ + BD_NAME bd_name; /* peer device name */ +} tBTA_DM_SP_RMT_OOB; + +/* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */ +typedef struct +{ + tBTA_STATUS result; /* TRUE of bond cancel succeeded, FALSE if failed. */ +} tBTA_DM_BOND_CANCEL_CMPL; + +/* Union of all security callback structures */ +typedef union +{ + tBTA_DM_ENABLE enable; /* BTA enabled */ + tBTA_DM_PIN_REQ pin_req; /* PIN request. */ + tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */ + tBTA_DM_AUTHORIZE authorize; /* Authorization request. */ + tBTA_DM_LINK_UP link_up; /* ACL connection down event */ + tBTA_DM_LINK_DOWN link_down; /* ACL connection down event */ + tBTA_DM_SIG_STRENGTH sig_strength; /* rssi and link quality value */ + tBTA_DM_BUSY_LEVEL busy_level; /* System busy level */ + tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */ + tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */ + tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */ + tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */ + tBTA_DM_SP_KEY_PRESS key_press; /* key press notification event */ + tBTA_DM_ROLE_CHG role_chg; /* role change event */ + tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */ + tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */ + tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */ + BT_OCTET16 ble_er; /* ER event data */ +} tBTA_DM_SEC; + +/* Security callback */ +typedef void (tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data); + +/* Vendor Specific Command Callback */ +typedef tBTM_VSC_CMPL_CB tBTA_VENDOR_CMPL_CBACK; + +/* Search callback events */ +#define BTA_DM_INQ_RES_EVT 0 /* Inquiry result for a peer device. */ +#define BTA_DM_INQ_CMPL_EVT 1 /* Inquiry complete. */ +#define BTA_DM_DISC_RES_EVT 2 /* Discovery result for a peer device. */ +#define BTA_DM_DISC_BLE_RES_EVT 3 /* Discovery result for BLE GATT based servoce on a peer device. */ +#define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */ +#define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */ +#define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */ + +typedef UINT8 tBTA_DM_SEARCH_EVT; + +#define BTA_DM_INQ_RES_IGNORE_RSSI BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */ + +/* Structure associated with BTA_DM_INQ_RES_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + DEV_CLASS dev_class; /* Device class of peer device. */ + BOOLEAN remt_name_not_required; /* Application sets this flag if it already knows the name of the device */ + /* If the device name is known to application BTA skips the remote name request */ + BOOLEAN is_limited; /* TRUE, if the limited inquiry bit is set in the CoD */ + INT8 rssi; /* The rssi value */ + UINT8 *p_eir; /* received EIR */ +#if (BLE_INCLUDED == TRUE) + UINT8 inq_result_type; + UINT8 ble_addr_type; + tBTM_BLE_EVT_TYPE ble_evt_type; + tBT_DEVICE_TYPE device_type; +#endif + +} tBTA_DM_INQ_RES; + +/* Structure associated with BTA_DM_INQ_CMPL_EVT */ +typedef struct +{ + UINT8 num_resps; /* Number of inquiry responses. */ +} tBTA_DM_INQ_CMPL; + +/* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + UINT8 num_record; /* Number of DI record */ + tBTA_STATUS result; +} tBTA_DM_DI_DISC_CMPL; + +/* Structure associated with BTA_DM_DISC_RES_EVT */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + BD_NAME bd_name; /* Name of peer device. */ + tBTA_SERVICE_MASK services; /* Services found on peer device. */ +// btla-specific ++ + UINT8 * p_raw_data; /* Raw data for discovery DB */ + UINT32 raw_data_size; /* size of raw data */ + tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */ +// btla-specific -- + tBTA_STATUS result; +} tBTA_DM_DISC_RES; + +/* Structure associated with tBTA_DM_DISC_BLE_RES */ +typedef struct +{ + BD_ADDR bd_addr; /* BD address peer device. */ + BD_NAME bd_name; /* Name of peer device. */ + tBT_UUID service; /* GATT based Services UUID found on peer device. */ +} tBTA_DM_DISC_BLE_RES; + + +/* Union of all search callback structures */ +typedef union +{ + tBTA_DM_INQ_RES inq_res; /* Inquiry result for a peer device. */ + tBTA_DM_INQ_CMPL inq_cmpl; /* Inquiry complete. */ + tBTA_DM_DISC_RES disc_res; /* Discovery result for a peer device. */ + tBTA_DM_DISC_BLE_RES disc_ble_res; /* discovery result for GATT based service */ + tBTA_DM_DI_DISC_CMPL di_disc; /* DI discovery result for a peer device */ + +} tBTA_DM_SEARCH; + +/* Search callback */ +typedef void (tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data); + +/* Execute call back */ +typedef void (tBTA_DM_EXEC_CBACK) (void * p_param); + +/* Encryption callback*/ +typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_STATUS result); + +#if BLE_INCLUDED == TRUE +#define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE +#define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT +#define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM +#define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM +typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT; +#else +typedef UINT8 tBTA_DM_BLE_SEC_ACT; +#endif + +/* Maximum service name length */ +#define BTA_SERVICE_NAME_LEN 35 +#define BTA_SERVICE_DESP_LEN BTA_SERVICE_NAME_LEN +#define BTA_PROVIDER_NAME_LEN BTA_SERVICE_NAME_LEN + + +/* link policy masks */ +#define BTA_DM_LP_SWITCH HCI_ENABLE_MASTER_SLAVE_SWITCH +#define BTA_DM_LP_HOLD HCI_ENABLE_HOLD_MODE +#define BTA_DM_LP_SNIFF HCI_ENABLE_SNIFF_MODE +#define BTA_DM_LP_PARK HCI_ENABLE_PARK_MODE +typedef UINT16 tBTA_DM_LP_MASK; + +/* power mode actions */ +#define BTA_DM_PM_NO_ACTION 0x00 /* no change to the current pm setting */ +#define BTA_DM_PM_PARK 0x10 /* prefers park mode */ +#define BTA_DM_PM_SNIFF 0x20 /* prefers sniff mode */ +#define BTA_DM_PM_SNIFF1 0x21 /* prefers sniff1 mode */ +#define BTA_DM_PM_SNIFF2 0x22 /* prefers sniff2 mode */ +#define BTA_DM_PM_SNIFF3 0x23 /* prefers sniff3 mode */ +#define BTA_DM_PM_SNIFF4 0x24 /* prefers sniff4 mode */ +#define BTA_DM_PM_SNIFF5 0x25 /* prefers sniff5 mode */ +#define BTA_DM_PM_SNIFF6 0x26 /* prefers sniff6 mode */ +#define BTA_DM_PM_SNIFF7 0x27 /* prefers sniff7 mode */ +#define BTA_DM_PM_SNIFF_USER0 0x28 /* prefers user-defined sniff0 mode (testtool only) */ +#define BTA_DM_PM_SNIFF_USER1 0x29 /* prefers user-defined sniff1 mode (testtool only) */ +#define BTA_DM_PM_ACTIVE 0x40 /* prefers active mode */ +#define BTA_DM_PM_RETRY 0x80 /* retry power mode based on current settings */ +#define BTA_DM_PM_NO_PREF 0x01 /* service has no prefernce on power mode setting. eg. connection to service got closed */ + +typedef UINT8 tBTA_DM_PM_ACTTION; + +/* index to bta_dm_ssr_spec */ +#define BTA_DM_PM_SSR0 0 +#define BTA_DM_PM_SSR1 1 +#define BTA_DM_PM_SSR2 2 +#define BTA_DM_PM_SSR3 3 +#define BTA_DM_PM_SSR4 4 +#define BTA_DM_PM_SSR5 5 +#define BTA_DM_PM_SSR6 6 + +#define BTA_DM_PM_NUM_EVTS 9 + +#ifndef BTA_DM_PM_PARK_IDX +#define BTA_DM_PM_PARK_IDX 5 /* the actual index to bta_dm_pm_md[] for PARK mode */ +#endif + +#define BTA_DM_SW_BB_TO_MM BTM_SW_BB_TO_MM +#define BTA_DM_SW_MM_TO_BB BTM_SW_MM_TO_BB +#define BTA_DM_SW_BB_TO_BTC BTM_SW_BB_TO_BTC +#define BTA_DM_SW_BTC_TO_BB BTM_SW_BTC_TO_BB + +typedef tBTM_SW_DIR tBTA_DM_SW_DIR; + +/* Switch callback events */ +#define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */ + +typedef UINT8 tBTA_DM_SWITCH_EVT; +typedef void (tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event, tBTA_STATUS status); + +/* Audio routing out configuration */ +#define BTA_DM_ROUTE_NONE 0x00 /* No Audio output */ +#define BTA_DM_ROUTE_DAC 0x01 /* routing over analog output */ +#define BTA_DM_ROUTE_I2S 0x02 /* routing over digital (I2S) output */ +#define BTA_DM_ROUTE_BT_MONO 0x04 /* routing over SCO */ +#define BTA_DM_ROUTE_BT_STEREO 0x08 /* routing over BT Stereo */ +#define BTA_DM_ROUTE_HOST 0x10 /* routing over Host */ +#define BTA_DM_ROUTE_FMTX 0x20 /* routing over FMTX */ +#define BTA_DM_ROUTE_FMRX 0x40 /* routing over FMRX */ +#define BTA_DM_ROUTE_BTSNK 0x80 /* routing over BT SNK */ + +typedef UINT8 tBTA_DM_ROUTE_PATH; + + +/* Device Identification (DI) data structure +*/ +/* Used to set the DI record */ +typedef tSDP_DI_RECORD tBTA_DI_RECORD; +/* Used to get the DI record */ +typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD; +/* SDP discovery database */ +typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB; + +#ifndef BTA_DI_NUM_MAX +#define BTA_DI_NUM_MAX 3 +#endif + +/***************************************************************************** +** External Function Declarations +*****************************************************************************/ +#ifdef __cplusplus +extern "C" +{ +#endif + +/******************************************************************************* +** +** Function BTA_EnableBluetooth +** +** Description This function initializes BTA and prepares BTA and the +** Bluetooth protocol stack for use. This function is +** typically called at startup or when Bluetooth services +** are required by the phone. This function must be called +** before calling any other API function. +** +** +** Returns BTA_SUCCESS if successful. +** BTA_FAIL if internal failure. +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback); + +/******************************************************************************* +** +** Function BTA_DisableBluetooth +** +** Description This function disables BTA and the Bluetooth protocol +** stack. It is called when BTA is no longer being used +** by any application in the system. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_DisableBluetooth(void); + +/******************************************************************************* +** +** Function BTA_EnableTestMode +** +** Description Enables bluetooth device under test mode +** +** +** Returns tBTA_STATUS +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_EnableTestMode(void); + +/******************************************************************************* +** +** Function BTA_DisableTestMode +** +** Description Disable bluetooth device under test mode +** +** +** Returns None +** +*******************************************************************************/ +BTA_API extern void BTA_DisableTestMode(void); + +/******************************************************************************* +** +** Function BTA_DmIsDeviceUp +** +** Description This function tests whether the Bluetooth module is up +** and ready. This is a direct execution function that +** may lock task scheduling on some platforms. +** +** +** Returns TRUE if the module is ready. +** FALSE if the module is not ready. +** +*******************************************************************************/ +BTA_API extern BOOLEAN BTA_DmIsDeviceUp(void); + +/******************************************************************************* +** +** Function BTA_DmSetDeviceName +** +** Description This function sets the Bluetooth name of the local device. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetDeviceName(char *p_name); + +/******************************************************************************* +** +** Function BTA_DmSetVisibility +** +** Description This function sets the Bluetooth connectable,discoverable, +** pairable and conn paired only modesmodes of the local device. +** This controls whether other Bluetooth devices can find and connect to +** the local device. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter); + +/******************************************************************************* +** +** Function BTA_DmSetScanParam +** +** Description This function sets the parameters for page scan and +** inquiry scan. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetScanParam (UINT16 page_scan_interval, UINT16 page_scan_window, + UINT16 inquiry_scan_interval, UINT16 inquiry_scan_window); + +/******************************************************************************* +** +** Function BTA_DmSetAfhChannels +** +** Description This function sets the AFH first and +** last disable channel, so channels within +** that range are disabled. +** In order to use this API, BTM_BYPASS_AMP_AUTO_AFH must be set +** to be TRUE +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetAfhChannels(UINT8 first, UINT8 last); + + +/******************************************************************************* +** +** Function BTA_DmVendorSpecificCommand +** +** Description This function sends the vendor specific command +** to the controller +** +** +** Returns tBTA_STATUS +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_DmVendorSpecificCommand (UINT16 opcode, UINT8 param_len,UINT8 *p_param_buf, tBTA_VENDOR_CMPL_CBACK *p_cback); + + +/******************************************************************************* +** +** Function BTA_DmSearch +** +** Description This function searches for peer Bluetooth devices. It +** first performs an inquiry; for each device found from the +** inquiry it gets the remote name of the device. If +** parameter services is nonzero, service discovery will be +** performed on each device for the services specified. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, + tBTA_DM_SEARCH_CBACK *p_cback); + +/******************************************************************************* +** +** Function BTA_DmSearchCancel +** +** Description This function cancels a search that has been initiated +** by calling BTA_DmSearch(). +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSearchCancel(void); + +/******************************************************************************* +** +** Function BTA_DmDiscover +** +** Description This function performs service discovery for the services +** of a particular peer device. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services, + tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); + +// btla-specific ++ +/******************************************************************************* +** +** Function BTA_DmDiscoverUUID +** +** Description This function performs service discovery for the services +** of a particular peer device. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, + tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); + +/******************************************************************************* +** +** Function BTA_DmGetCachedRemoteName +** +** Description Retieve cached remote name if available +** +** Returns BTA_SUCCESS if cached name was retrieved +** BTA_FAILURE if cached name is not available +** +*******************************************************************************/ +tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name); +// btla-specific -- + +/******************************************************************************* +** +** Function BTA_DmIsMaster +** +** Description This function checks if the local device is the master of +** the link to the given device +** +** Returns TRUE if master. +** FALSE if not. +** +*******************************************************************************/ +BTA_API extern BOOLEAN BTA_DmIsMaster(BD_ADDR bd_addr); + +/******************************************************************************* +** +** Function BTA_DmBond +** +** Description This function initiates a bonding procedure with a peer +** device. The bonding procedure enables authentication +** and optionally encryption on the Bluetooth link. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmBond(BD_ADDR bd_addr); + +/******************************************************************************* +** +** Function BTA_DmBondCancel +** +** Description This function cancels a bonding procedure with a peer +** device. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmBondCancel(BD_ADDR bd_addr); + +/******************************************************************************* +** +** Function BTA_DmPinReply +** +** Description This function provides a PIN when one is requested by DM +** during a bonding procedure. The application should call +** this function after the security callback is called with +** a BTA_DM_PIN_REQ_EVT. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len, + UINT8 *p_pin); + +/******************************************************************************* +** +** Function BTA_DmLinkPolicy +** +** Description This function sets/clears the link policy mask to the given +** bd_addr. +** If clearing the sniff or park mode mask, the link is put +** in active mode. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmLinkPolicy(BD_ADDR bd_addr, tBTA_DM_LP_MASK policy_mask, + BOOLEAN set); + +#if (BTM_OOB_INCLUDED == TRUE) +/******************************************************************************* +** +** Function BTA_DmLocalOob +** +** Description This function retrieves the OOB data from local controller. +** The result is reported by bta_dm_co_loc_oob(). +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmLocalOob(void); +#endif /* BTM_OOB_INCLUDED */ + +/******************************************************************************* +** +** Function BTA_DmConfirm +** +** Description This function accepts or rejects the numerical value of the +** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept); + +/******************************************************************************* +** +** Function BTA_DmPasskeyCancel +** +** Description This function is called to cancel the simple pairing process +** reported by BTA_DM_SP_KEY_NOTIF_EVT +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmPasskeyCancel(BD_ADDR bd_addr); + +/******************************************************************************* +** +** Function BTA_DmAddDevice +** +** Description This function adds a device to the security database list +** of peer devices. This function would typically be called +** at system startup to initialize the security database with +** known peer devices. This is a direct execution function +** that may lock task scheduling on some platforms. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, + LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask, + BOOLEAN is_trusted, UINT8 key_type, + tBTA_IO_CAP io_cap); + +/******************************************************************************* +** +** Function BTA_DmAddDevWithName +** +** Description This function is newer version of BTA_DmAddDevice() +** which added bd_name and features as input parameters. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmAddDevWithName (BD_ADDR bd_addr, DEV_CLASS dev_class, + BD_NAME bd_name, BD_FEATURES features, + LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask, + BOOLEAN is_trusted, UINT8 key_type, tBTA_IO_CAP io_cap); + +/******************************************************************************* +** +** Function BTA_DmRemoveDevice +** +** Description This function removes a device from the security database. +** This is a direct execution function that may lock task +** scheduling on some platforms. +** +** +** Returns BTA_SUCCESS if successful. +** BTA_FAIL if operation failed. +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr); + +/******************************************************************************* +** +** Function BTA_DmAuthorizeReply +** +** Description This function provides an authorization reply when +** authorization is requested by BTA. The application calls +** this function after the security callback is called with +** a BTA_DM_AUTHORIZE_EVT. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmAuthorizeReply(BD_ADDR bd_addr, tBTA_SERVICE_ID service, + tBTA_AUTH_RESP response); + +/******************************************************************************* +** +** Function BTA_DmSignalStrength +** +** Description This function initiates RSSI and channnel quality +** measurments. BTA_DM_SIG_STRENGTH_EVT is sent to +** application with the values of RSSI and channel +** quality +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSignalStrength(tBTA_SIG_STRENGTH_MASK mask, UINT16 period, BOOLEAN start); + +/******************************************************************************* +** +** Function BTA_DmWriteInqTxPower +** +** Description This command is used to write the inquiry transmit power level +** used to transmit the inquiry (ID) data packets. +** +** Parameters tx_power - tx inquiry power to use, valid value is -70 ~ 20 + +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmWriteInqTxPower(INT8 tx_power); + +/******************************************************************************* +** +** Function BTA_DmEirAddUUID +** +** Description This function is called to add UUID into EIR. +** +** Parameters tBT_UUID - UUID +** +** Returns None +** +*******************************************************************************/ +BTA_API extern void BTA_DmEirAddUUID (tBT_UUID *p_uuid); + +/******************************************************************************* +** +** Function BTA_DmEirRemoveUUID +** +** Description This function is called to remove UUID from EIR. +** +** Parameters tBT_UUID - UUID +** +** Returns None +** +*******************************************************************************/ +BTA_API extern void BTA_DmEirRemoveUUID (tBT_UUID *p_uuid); + +/******************************************************************************* +** +** Function BTA_DmSetEIRConfig +** +** Description This function is called to override the BTA default EIR parameters. +** This funciton is only valid in a system where BTU & App task +** are in the same memory space. +** +** Parameters Pointer to User defined EIR config +** +** Returns None +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetEIRConfig (tBTA_DM_EIR_CONF *p_eir_cfg); + +/******************************************************************************* +** +** Function BTA_CheckEirData +** +** Description This function is called to get EIR data from significant part. +** +** Parameters p_eir - pointer of EIR significant part +** type - finding EIR data type +** p_length - return the length of EIR data +** +** Returns pointer of EIR data +** +*******************************************************************************/ +BTA_API extern UINT8 *BTA_CheckEirData( UINT8 *p_eir, UINT8 tag, UINT8 *p_length ); + +/******************************************************************************* +** +** Function BTA_GetEirService +** +** Description This function is called to get BTA service mask from EIR. +** +** Parameters p_eir - pointer of EIR significant part +** p_services - return the BTA service mask +** +** Returns None +** +*******************************************************************************/ +BTA_API extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services ); + +/******************************************************************************* +** +** Function BTA_DmUseSsr +** +** Description This function is called to check if the connected peer device +** supports SSR or not. +** +** Returns TRUE, if SSR is supported +** +*******************************************************************************/ +BTA_API extern BOOLEAN BTA_DmUseSsr( BD_ADDR bd_addr ); + + +/******************************************************************************* +** +** Function BTA_DmSetLocalDiRecord +** +** Description This function adds a DI record to the local SDP database. +** +** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info, + UINT32 *p_handle ); + +/******************************************************************************* +** +** Function BTA_DmGetLocalDiRecord +** +** Description Get a specified DI record to the local SDP database. If no +** record handle is provided, the primary DI record will be +** returned. +** +** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_DmGetLocalDiRecord( tBTA_DI_GET_RECORD *p_device_info, + UINT32 *p_handle ); + +/******************************************************************************* +** +** Function BTA_DmDiDiscover +** +** Description This function queries a remote device for DI information. +** +** Returns None. +** +*******************************************************************************/ +BTA_API extern void BTA_DmDiDiscover( BD_ADDR remote_device, tBTA_DISCOVERY_DB *p_db, + UINT32 len, tBTA_DM_SEARCH_CBACK *p_cback ); + +/******************************************************************************* +** +** Function BTA_DmGetDiRecord +** +** Description This function retrieves a remote device's DI record from +** the specified database. +** +** Returns None. +** +*******************************************************************************/ +BTA_API extern tBTA_STATUS BTA_DmGetDiRecord( UINT8 get_record_index, tBTA_DI_GET_RECORD *p_device_info, + tBTA_DISCOVERY_DB *p_db ); + +/******************************************************************************* +** +** Function BTA_SysFeatures +** +** Description This function is called to set system features. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_SysFeatures (UINT16 sys_features); + +/******************************************************************************* +** +** Function bta_dmexecutecallback +** +** Description This function will request BTA to execute a call back in the context of BTU task +** This API was named in lower case because it is only intended +** for the internal customers(like BSA). +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param); + +#if (BTM_SCO_HCI_INCLUDED == TRUE) +/******************************************************************************* +** +** Function BTA_DmPcmInitSamples +** +** Description initialize the down sample converter. +** +** src_sps: original samples per second (source audio data) +** (ex. 44100, 48000) +** bits: number of bits per pcm sample (16) +** n_channels: number of channels (i.e. mono(1), stereo(2)...) +** +** Returns none +** +*******************************************************************************/ +BTA_API extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels); + +/************************************************************************************** +** Function BTA_DmPcmResample +** +** Description Down sampling utility to convert higher sampling rate into 8K/16bits +** PCM samples. +** +** Parameters p_src: pointer to the buffer where the original sampling PCM +** are stored. +** in_bytes: Length of the input PCM sample buffer in byte. +** p_dst: pointer to the buffer which is to be used to store +** the converted PCM samples. +** +** +** Returns INT32: number of samples converted. +** +**************************************************************************************/ +BTA_API extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst); +#endif + +#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) +/* BLE related API functions */ +/******************************************************************************* +** +** Function BTA_DmBleSecurityGrant +** +** Description Grant security request access. +** +** Parameters: bd_addr - BD address of the peer +** res - security grant status. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res); + + + +/******************************************************************************* +** +** Function BTA_DmBleSetBgConnType +** +** Description This function is called to set BLE connectable mode for a +** peripheral device. +** +** Parameters bg_conn_type: it can be auto connection, or selective connection. +** p_select_cback: callback function when selective connection procedure +** is being used. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback); + +/******************************************************************************* +** +** Function BTA_DmBlePasskeyReply +** +** Description Send BLE SMP passkey reply. +** +** Parameters: bd_addr - BD address of the peer +** accept - passkey entry sucessful or declined. +** passkey - passkey value, must be a 6 digit number, +** can be lead by 0. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey); + +/******************************************************************************* +** +** Function BTA_DmAddBleDevice +** +** Description Add a BLE device. This function will be normally called +** during host startup to restore all required information +** for a LE device stored in the NVRAM. +** +** Parameters: bd_addr - BD address of the peer +** dev_type - Remote device's device type. +** addr_type - LE device address type. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, + tBT_DEVICE_TYPE dev_type); + + +/******************************************************************************* +** +** Function BTA_DmAddBleKey +** +** Description Add/modify LE device information. This function will be +** normally called during host startup to restore all required +** information stored in the NVRAM. +** +** Parameters: bd_addr - BD address of the peer +** p_le_key - LE key values. +** key_type - LE SMP key type. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, + tBTA_LE_KEY_TYPE key_type); + +/******************************************************************************* +** +** Function BTA_DmSetBlePrefConnParams +** +** Description This function is called to set the preferred connection +** parameters when default connection parameter is not desired. +** +** Parameters: bd_addr - BD address of the peripheral +** min_conn_int - minimum preferred connection interval +** max_conn_int - maximum preferred connection interval +** slave_latency - preferred slave latency +** supervision_tout - preferred supervision timeout +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr, + UINT16 min_conn_int, UINT16 max_conn_int, + UINT16 slave_latency, UINT16 supervision_tout ); + +/******************************************************************************* +** +** Function BTA_DmSetBleConnScanParams +** +** Description This function is called to set scan parameters used in +** BLE connection request +** +** Parameters: bd_addr - BD address of the peripheral +** scan_interval - scan interval +** scan_window - scan window +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetBleConnScanParams(UINT16 scan_interval, + UINT16 scan_window ); + +/******************************************************************************* +** +** Function BTA_DmSearchExt +** +** Description This function searches for peer Bluetooth devices. It performs +** an inquiry and gets the remote name for devices. Service +** discovery is done if services is non zero +** +** Parameters p_dm_inq: inquiry conditions +** services: if service is not empty, service discovery will be done. +** for all GATT based service condition, put num_uuid, and +** p_uuid is the pointer to the list of UUID values. +** p_cback: callback functino when search is completed. +** +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, + tBTA_DM_SEARCH_CBACK *p_cback); + +/******************************************************************************* +** +** Function BTA_DmDiscoverExt +** +** Description This function does service discovery for services of a +** peer device. When services.num_uuid is 0, it indicates all +** GATT based services are to be searched; other wise a list of +** UUID of interested services should be provided through +** services.p_uuid. +** +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, + tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); + + +/******************************************************************************* +** +** Function BTA_DmSetEncryption +** +** Description This function is called to ensure that connection is +** encrypted. Should be called only on an open connection. +** Typically only needed for connections that first want to +** bring up unencrypted links, then later encrypt them. +** +** Parameters: bd_addr - Address of the peer device +** p_callback - Pointer to callback function to indicat the +** link encryption status +** sec_act - This is the security action to indicate +** what knid of BLE security level is required for +** the BLE link if the BLE is supported +** Note: This parameter is ignored for the BR/EDR link +** or the BLE is not supported +** +** Returns void +** +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_DM_ENCRYPT_CBACK *p_callback, + tBTA_DM_BLE_SEC_ACT sec_act); + +#endif + +// btla-specific ++ +/******************************************************************************* +** +** Function BTA_DmSetAfhChannelAssessment +** +** Description This function is called to set the channel assessment mode on or off +** +** Returns status +** +*******************************************************************************/ +BTA_API extern void BTA_DmSetAfhChannelAssessment (BOOLEAN enable_or_disable); +// btla-specific -- + +#ifdef __cplusplus +} +#endif + +#endif /* BTA_API_H */ + |