/****************************************************************************** * * Copyright (C) 2009-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include #include #include "bta_api.h" #include "bta_sys.h" #include "bta_dm_co.h" #include "bta_dm_ci.h" #if (BTM_OOB_INCLUDED == TRUE) #include "btif_dm.h" #endif /******************************************************************************* ** ** Function bta_dm_co_get_compress_memory ** ** Description This callout function is executed by DM to get memory for compression ** Parameters id - BTA SYS ID ** memory_p - memory return by callout ** memory_size - memory size ** ** Returns TRUE for success, FALSE for fail. ** *******************************************************************************/ BOOLEAN bta_dm_co_get_compress_memory(tBTA_SYS_ID id, UINT8 **memory_p, UINT32 *memory_size) { return TRUE; } /******************************************************************************* ** ** Function bta_dm_co_io_req ** ** Description This callout function is executed by DM to get IO capabilities ** of the local device for the Simple Pairing process ** ** Parameters bd_addr - The peer device ** *p_io_cap - The local Input/Output capabilities ** *p_oob_data - TRUE, if OOB data is available for the peer device. ** *p_auth_req - TRUE, if MITM protection is required. ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, tBTA_OOB_DATA *p_oob_data, tBTA_AUTH_REQ *p_auth_req, BOOLEAN is_orig) { #if (BTM_OOB_INCLUDED == TRUE) btif_dm_set_oob_for_io_req(p_oob_data); #endif BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_oob_data = %d", *p_oob_data); BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_io_cap = %d", *p_io_cap); BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_auth_req = %d", *p_auth_req); BTIF_TRACE_DEBUG1("bta_dm_co_io_req is_orig = %d", is_orig); } /******************************************************************************* ** ** Function bta_dm_co_io_rsp ** ** Description This callout function is executed by DM to report IO capabilities ** of the peer device for the Simple Pairing process ** ** Parameters bd_addr - The peer device ** io_cap - The remote Input/Output capabilities ** oob_data - TRUE, if OOB data is available for the peer device. ** auth_req - TRUE, if MITM protection is required. ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap, tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req) { } /******************************************************************************* ** ** Function bta_dm_co_lk_upgrade ** ** Description This callout function is executed by DM to check if the ** platform wants allow link key upgrade ** ** Parameters bd_addr - The peer device ** *p_upgrade - TRUE, if link key upgrade is desired. ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_lk_upgrade(BD_ADDR bd_addr, BOOLEAN *p_upgrade ) { } #if (BTM_OOB_INCLUDED == TRUE) /******************************************************************************* ** ** Function bta_dm_co_loc_oob ** ** Description This callout function is executed by DM to report the OOB ** data of the local device for the Simple Pairing process ** ** Parameters valid - TRUE, if the local OOB data is retrieved from LM ** c - Simple Pairing Hash C ** r - Simple Pairing Randomnizer R ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r) { BTIF_TRACE_DEBUG1("bta_dm_co_loc_oob, valid = %d", valid); #ifdef BTIF_DM_OOB_TEST btif_dm_proc_loc_oob(valid, c, r); #endif } /******************************************************************************* ** ** Function bta_dm_co_rmt_oob ** ** Description This callout function is executed by DM to request the OOB ** data for the remote device for the Simple Pairing process ** Need to call bta_dm_ci_rmt_oob() in response ** ** Parameters bd_addr - The peer device ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_rmt_oob(BD_ADDR bd_addr) { BT_OCTET16 p_c; BT_OCTET16 p_r; BOOLEAN result = FALSE; #ifdef BTIF_DM_OOB_TEST result = btif_dm_proc_rmt_oob(bd_addr, p_c, p_r); #endif BTIF_TRACE_DEBUG1("bta_dm_co_rmt_oob: result=%d",result); bta_dm_ci_rmt_oob(result, bd_addr, p_c, p_r); } #endif /* BTM_OOB_INCLUDED */ // REMOVE FOR BLUEDROID ? #if (BTM_SCO_HCI_INCLUDED == TRUE ) && (BTM_SCO_INCLUDED == TRUE) /******************************************************************************* ** ** Function btui_sco_codec_callback ** ** Description Callback for btui codec. ** ** ** Returns void ** *******************************************************************************/ static void btui_sco_codec_callback(UINT16 event, UINT16 sco_handle) { bta_dm_sco_ci_data_ready(event, sco_handle); } /******************************************************************************* ** ** Function bta_dm_sco_co_init ** ** Description This function can be used by the phone to initialize audio ** codec or for other initialization purposes before SCO connection ** is opened. ** ** ** Returns tBTA_DM_SCO_ROUTE_TYPE: SCO routing configuration type. ** *******************************************************************************/ tBTA_DM_SCO_ROUTE_TYPE bta_dm_sco_co_init(UINT32 rx_bw, UINT32 tx_bw, tBTA_CODEC_INFO * p_codec_type, UINT8 app_id) { tBTM_SCO_ROUTE_TYPE route = BTA_DM_SCO_ROUTE_PCM; BTIF_TRACE_DEBUG0("bta_dm_sco_co_init"); /* set up SCO routing configuration if SCO over HCI app ID is used and run time configuration is set to SCO over HCI */ /* HS invoke this call-out */ if ( #if (BTA_HS_INCLUDED == TRUE ) && (BTA_HS_INCLUDED == TRUE) (app_id == BTUI_DM_SCO_4_HS_APP_ID && btui_cfg.hs_sco_over_hci) || #endif /* AG invoke this call-out */ (app_id != BTUI_DM_SCO_4_HS_APP_ID && btui_cfg.ag_sco_over_hci )) { route = btui_cb.sco_hci = BTA_DM_SCO_ROUTE_HCI; } /* no codec is is used for the SCO data */ if (p_codec_type->codec_type == BTA_SCO_CODEC_PCM && route == BTA_DM_SCO_ROUTE_HCI) { /* initialize SCO codec */ if (!btui_sco_codec_init(rx_bw, tx_bw)) { BTIF_TRACE_ERROR0("codec initialization exception!"); } } return route; } /******************************************************************************* ** ** Function bta_dm_sco_co_open ** ** Description This function is executed when a SCO connection is open. ** ** ** Returns void ** *******************************************************************************/ void bta_dm_sco_co_open(UINT16 handle, UINT8 pkt_size, UINT16 event) { tBTUI_SCO_CODEC_CFG cfg; if (btui_cb.sco_hci) { BTIF_TRACE_DEBUG2("bta_dm_sco_co_open handle:%d pkt_size:%d", handle, pkt_size); /* use dedicated SCO buffer pool for SCO TX data */ cfg.pool_id = HCI_SCO_POOL_ID; cfg.p_cback = btui_sco_codec_callback; cfg.pkt_size = pkt_size; cfg.cb_event = event; /* open and start the codec */ btui_sco_codec_open(&cfg); btui_sco_codec_start(handle); } } /******************************************************************************* ** ** Function bta_dm_sco_co_close ** ** Description This function is called when a SCO connection is closed ** ** ** Returns void ** *******************************************************************************/ void bta_dm_sco_co_close(void) { if (btui_cb.sco_hci) { BTIF_TRACE_DEBUG0("bta_dm_sco_co_close close codec"); /* close sco codec */ btui_sco_codec_close(); btui_cb.sco_hci = FALSE; } } /******************************************************************************* ** ** Function bta_dm_sco_co_in_data ** ** Description This function is called to send incoming SCO data to application. ** ** Returns void ** *******************************************************************************/ void bta_dm_sco_co_in_data(BT_HDR *p_buf) { if (btui_cfg.sco_use_mic) btui_sco_codec_inqdata (p_buf); else GKI_freebuf(p_buf); } /******************************************************************************* ** ** Function bta_dm_sco_co_out_data ** ** Description This function is called to send SCO data over HCI. ** ** Returns void ** *******************************************************************************/ void bta_dm_sco_co_out_data(BT_HDR **p_buf) { btui_sco_codec_readbuf(p_buf); } #endif /* #if (BTM_SCO_HCI_INCLUDED == TRUE ) && (BTM_SCO_INCLUDED == TRUE)*/ #if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE) /******************************************************************************* ** ** Function bta_dm_co_le_io_key_req ** ** Description This callout function is executed by DM to get BLE key information ** before SMP pairing gets going. ** ** Parameters bd_addr - The peer device ** *p_max_key_size - max key size local device supported. ** *p_init_key - initiator keys. ** *p_resp_key - responder keys. ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_le_io_key_req(BD_ADDR bd_addr, UINT8 *p_max_key_size, tBTA_LE_KEY_TYPE *p_init_key, tBTA_LE_KEY_TYPE *p_resp_key ) { BTIF_TRACE_ERROR0("##################################"); BTIF_TRACE_ERROR0("bta_dm_co_le_io_key_req: only setting max size to 16"); BTIF_TRACE_ERROR0("##################################"); *p_max_key_size = 16; *p_init_key = *p_resp_key = (BTA_LE_KEY_PENC|BTA_LE_KEY_PID|BTA_LE_KEY_PCSRK|BTA_LE_KEY_LENC|BTA_LE_KEY_LID|BTA_LE_KEY_LCSRK); } /******************************************************************************* ** ** Function bta_dm_co_ble_local_key_reload ** ** Description This callout function is to load the local BLE keys if available ** on the device. ** ** Parameters none ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_ble_load_local_keys(tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er, tBTA_BLE_LOCAL_ID_KEYS *p_id_keys) { BTIF_TRACE_ERROR0("##################################"); BTIF_TRACE_ERROR0("bta_dm_co_ble_load_local_keys: TBD Load local keys if any are persisted"); BTIF_TRACE_ERROR0("##################################"); } /******************************************************************************* ** ** Function bta_dm_co_ble_io_req ** ** Description This callout function is executed by DM to get BLE IO capabilities ** before SMP pairing gets going. ** ** Parameters bd_addr - The peer device ** *p_io_cap - The local Input/Output capabilities ** *p_oob_data - TRUE, if OOB data is available for the peer device. ** *p_auth_req - Auth request setting (Bonding and MITM required or not) ** *p_max_key_size - max key size local device supported. ** *p_init_key - initiator keys. ** *p_resp_key - responder keys. ** ** Returns void. ** *******************************************************************************/ void bta_dm_co_ble_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, tBTA_OOB_DATA *p_oob_data, tBTA_LE_AUTH_REQ *p_auth_req, UINT8 *p_max_key_size, tBTA_LE_KEY_TYPE *p_init_key, tBTA_LE_KEY_TYPE *p_resp_key ) { /* if OOB is not supported, this call-out function does not need to do anything * otherwise, look for the OOB data associated with the address and set *p_oob_data accordingly * If the answer can not be obtained right away, * set *p_oob_data to BTA_OOB_UNKNOWN and call bta_dm_ci_io_req() when the answer is available */ /* *p_auth_req by default is FALSE for devices with NoInputNoOutput; TRUE for other devices. */ BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_auth_req=%d ble_authereq=%d", *p_auth_req, bte_appl_cfg.ble_auth_req); BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_io_cap=%d ble_io_cap=%d", *p_io_cap, bte_appl_cfg.ble_io_cap); BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_init_key=%d ble_init_key=%d", *p_init_key, bte_appl_cfg.ble_init_key); BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_resp_key=%d ble_resp_key=%d", *p_resp_key, bte_appl_cfg.ble_resp_key ); BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_max_key_size=%d ble_max_key_size=%d", *p_max_key_size, bte_appl_cfg.ble_max_key_size ); *p_oob_data = FALSE; if (bte_appl_cfg.ble_auth_req) *p_auth_req = bte_appl_cfg.ble_auth_req | (bte_appl_cfg.ble_auth_req & 0x04) | ((*p_auth_req) & 0x04); if (bte_appl_cfg.ble_io_cap <=4) *p_io_cap = bte_appl_cfg.ble_io_cap; if (bte_appl_cfg.ble_init_key<=7) *p_init_key = bte_appl_cfg.ble_init_key; if (bte_appl_cfg.ble_resp_key<=7) *p_resp_key = bte_appl_cfg.ble_resp_key; if (bte_appl_cfg.ble_max_key_size<=16) *p_max_key_size = bte_appl_cfg.ble_max_key_size; } #endif