/****************************************************************************** * * Copyright (C) 2000-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /***************************************************************************** * * This file contains functions that manages ACL link modes. * This includes operations such as active, hold, * park and sniff modes. * * This module contains both internal and external (API) * functions. External (API) functions are distinguishable * by their names beginning with uppercase BTM. * *****************************************************************************/ #include #include #include #include #include "bt_types.h" #include "gki.h" #include "hcimsgs.h" #include "btu.h" #include "btm_api.h" #include "btm_int.h" #include "l2c_int.h" #include "hcidefs.h" #if BTM_PWR_MGR_INCLUDED == TRUE /* This compile option is only useful when the FW has a bug * it automatically uses single slot when entering SNIFF mode, but does not restore the setting * This issue was found when A2DP link goes into sniff and existing sniff still has choppy audio. * If this issue is seen, look for FW solution first. * This work around code will be removed later. */ #ifndef BTM_PM_SNIFF_SLOT_WORK_AROUND #define BTM_PM_SNIFF_SLOT_WORK_AROUND FALSE #endif /*****************************************************************************/ /* to handle different modes */ /*****************************************************************************/ #define BTM_PM_STORED_MASK 0x80 /* set this mask if the command is stored */ #define BTM_PM_NUM_SET_MODES 3 /* only hold, sniff & park */ /* Usage: (ptr_features[ offset ] & mask )?TRUE:FALSE */ /* offset to supported feature */ const UINT8 btm_pm_mode_off[BTM_PM_NUM_SET_MODES] = {0, 0, 1}; /* mask to supported feature */ const UINT8 btm_pm_mode_msk[BTM_PM_NUM_SET_MODES] = {0x40, 0x80, 0x01}; #define BTM_PM_GET_MD1 1 #define BTM_PM_GET_MD2 2 #define BTM_PM_GET_COMP 3 const UINT8 btm_pm_md_comp_matrix[BTM_PM_NUM_SET_MODES*BTM_PM_NUM_SET_MODES] = { BTM_PM_GET_COMP, BTM_PM_GET_MD2, BTM_PM_GET_MD2, BTM_PM_GET_MD1, BTM_PM_GET_COMP, BTM_PM_GET_MD1, BTM_PM_GET_MD1, BTM_PM_GET_MD2, BTM_PM_GET_COMP }; /* function prototype */ static int btm_pm_find_acl_ind(BD_ADDR remote_bda); static tBTM_STATUS btm_pm_snd_md_req( UINT8 pm_id, int link_ind, tBTM_PM_PWR_MD *p_mode ); /* #ifdef BTM_PM_DEBUG #undef BTM_PM_DEBUG #define BTM_PM_DEBUG TRUE #endif */ #if BTM_PM_DEBUG == TRUE const char * btm_pm_state_str[] = { "pm_active_state", "pm_hold_state", "pm_sniff_state", "pm_park_state", "pm_pend_state" }; const char * btm_pm_event_str[] = { "pm_set_mode_event", "pm_hci_sts_event", "pm_mod_chg_event", "pm_update_event" }; const char * btm_pm_action_str[] = { "pm_set_mode_action", "pm_update_db_action", "pm_mod_chg_action", "pm_hci_sts_action", "pm_update_action" }; #endif /*****************************************************************************/ /* P U B L I C F U N C T I O N S */ /*****************************************************************************/ /******************************************************************************* ** ** Function BTM_PmRegister ** ** Description register or deregister with power manager ** ** Returns BTM_SUCCESS if successful, ** BTM_NO_RESOURCES if no room to hold registration ** BTM_ILLEGAL_VALUE ** *******************************************************************************/ tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id, tBTM_PM_STATUS_CBACK *p_cb) { int xx; /* de-register */ if(mask & BTM_PM_DEREG) { if(*p_pm_id >= BTM_MAX_PM_RECORDS) return BTM_ILLEGAL_VALUE; btm_cb.pm_reg_db[*p_pm_id].mask = BTM_PM_REC_NOT_USED; return BTM_SUCCESS; } for(xx=0; xx= BTM_MAX_PM_RECORDS) pm_id = BTM_PM_SET_ONLY_ID; if(p_mode == NULL) return BTM_ILLEGAL_VALUE; BTM_TRACE_API3( "BTM_SetPowerMode: pm_id %d BDA: %08x mode:0x%x", pm_id, (remote_bda[2]<<24)+(remote_bda[3]<<16)+(remote_bda[4]<<8)+remote_bda[5], p_mode->mode); /* take out the force bit */ mode = p_mode->mode & ~BTM_PM_MD_FORCE; acl_ind = btm_pm_find_acl_ind(remote_bda); if(acl_ind == MAX_L2CAP_LINKS) return (BTM_UNKNOWN_ADDR); p_cb = &(btm_cb.pm_mode_db[acl_ind]); if(mode != BTM_PM_MD_ACTIVE) { /* check if the requested mode is supported */ ind = mode - BTM_PM_MD_HOLD; /* make it base 0 */ p_features = BTM_ReadLocalFeatures(); if( !(p_features[ btm_pm_mode_off[ind] ] & btm_pm_mode_msk[ind] ) ) return BTM_MODE_UNSUPPORTED; } if(mode == p_cb->state) /* the requested mode is current mode */ { /* already in the requested mode and the current interval has less latency than the max */ if( (mode == BTM_PM_MD_ACTIVE) || ((p_mode->mode & BTM_PM_MD_FORCE) && (p_mode->max >= p_cb->interval) && (p_mode->min <= p_cb->interval)) || ((p_mode->mode & BTM_PM_MD_FORCE)==0 && (p_mode->max >= p_cb->interval)) ) { BTM_TRACE_DEBUG4( "BTM_SetPowerMode: mode:0x%x interval %d max:%d, min:%d", p_mode->mode, p_cb->interval, p_mode->max, p_mode->min); return BTM_SUCCESS; } } temp_pm_id = pm_id; if(pm_id == BTM_PM_SET_ONLY_ID) temp_pm_id = BTM_MAX_PM_RECORDS; /* update mode database */ if( ((pm_id != BTM_PM_SET_ONLY_ID) && (btm_cb.pm_reg_db[pm_id].mask & BTM_PM_REG_SET)) || ((pm_id == BTM_PM_SET_ONLY_ID) && (btm_cb.pm_pend_link != MAX_L2CAP_LINKS)) ) { #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2( "BTM_SetPowerMode: Saving cmd acl_ind %d temp_pm_id %d", acl_ind,temp_pm_id); #endif /* Make sure mask is set to BTM_PM_REG_SET */ btm_cb.pm_reg_db[temp_pm_id].mask |= BTM_PM_REG_SET; *(&p_cb->req_mode[temp_pm_id]) = *((tBTM_PM_PWR_MD *)p_mode); p_cb->chg_ind = TRUE; } #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2( "btm_pm state:0x%x, pm_pend_link: %d", p_cb->state, btm_cb.pm_pend_link); #endif /* if mode == hold or pending, return */ if( (p_cb->state == BTM_PM_STS_HOLD) || (p_cb->state == BTM_PM_STS_PENDING) || (btm_cb.pm_pend_link != MAX_L2CAP_LINKS) ) /* command pending */ { if(acl_ind != btm_cb.pm_pend_link) { /* set the stored mask */ p_cb->state |= BTM_PM_STORED_MASK; BTM_TRACE_DEBUG1( "btm_pm state stored:%d",acl_ind); } return BTM_CMD_STORED; } return btm_pm_snd_md_req(pm_id, acl_ind, p_mode); } /******************************************************************************* ** ** Function BTM_ReadPowerMode ** ** Description This returns the current mode for a specific ** ACL connection. ** ** Input Param remote_bda - device address of desired ACL connection ** ** Output Param p_mode - address where the current mode is copied into. ** BTM_ACL_MODE_NORMAL ** BTM_ACL_MODE_HOLD ** BTM_ACL_MODE_SNIFF ** BTM_ACL_MODE_PARK ** (valid only if return code is BTM_SUCCESS) ** ** Returns BTM_SUCCESS if successful, ** BTM_UNKNOWN_ADDR if bd addr is not active or bad ** *******************************************************************************/ tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda, tBTM_PM_MODE *p_mode) { int acl_ind; if( (acl_ind = btm_pm_find_acl_ind(remote_bda)) == MAX_L2CAP_LINKS) return (BTM_UNKNOWN_ADDR); *p_mode = btm_cb.pm_mode_db[acl_ind].state; return BTM_SUCCESS; } /******************************************************************************* ** ** Function BTM_SetSsrParams ** ** Description This sends the given SSR parameters for the given ACL ** connection if it is in ACTIVE mode. ** ** Input Param remote_bda - device address of desired ACL connection ** max_lat - maximum latency (in 0.625ms)(0-0xFFFE) ** min_rmt_to - minimum remote timeout ** min_loc_to - minimum local timeout ** ** ** Returns BTM_SUCCESS if the HCI command is issued successful, ** BTM_UNKNOWN_ADDR if bd addr is not active or bad ** BTM_CMD_STORED if the command is stored ** *******************************************************************************/ tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, UINT16 max_lat, UINT16 min_rmt_to, UINT16 min_loc_to) { #if (BTM_SSR_INCLUDED == TRUE) int acl_ind; tBTM_PM_MCB *p_cb; if( (acl_ind = btm_pm_find_acl_ind(remote_bda)) == MAX_L2CAP_LINKS) return (BTM_UNKNOWN_ADDR); if(BTM_PM_STS_ACTIVE == btm_cb.pm_mode_db[acl_ind].state || BTM_PM_STS_SNIFF == btm_cb.pm_mode_db[acl_ind].state) { if (btsnd_hcic_sniff_sub_rate(btm_cb.acl_db[acl_ind].hci_handle, max_lat, min_rmt_to, min_loc_to)) return BTM_SUCCESS; else return BTM_NO_RESOURCES; } p_cb = &btm_cb.pm_mode_db[acl_ind]; p_cb->max_lat = max_lat; p_cb->min_rmt_to = min_rmt_to; p_cb->min_loc_to = min_loc_to; return BTM_CMD_STORED; #else return BTM_ILLEGAL_ACTION; #endif } /******************************************************************************* ** ** Function btm_pm_reset ** ** Description as a part of the BTM reset process. ** ** Returns void ** *******************************************************************************/ void btm_pm_reset(void) { int xx; tBTM_PM_STATUS_CBACK *cb = NULL; /* clear the pending request for application */ if( (btm_cb.pm_pend_id != BTM_PM_SET_ONLY_ID) && (btm_cb.pm_reg_db[btm_cb.pm_pend_id].mask & BTM_PM_REG_NOTIF) ) { cb = btm_cb.pm_reg_db[btm_cb.pm_pend_id].cback; } /* no command pending */ btm_cb.pm_pend_link = MAX_L2CAP_LINKS; /* clear the register record */ for(xx=0; xxstate = BTM_PM_ST_ACTIVE; #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2( "btm_pm_sm_alloc ind:%d st:%d", ind, p_db->state); #endif } /******************************************************************************* ** ** Function btm_pm_find_acl_ind ** ** Description This function initializes the control block of an ACL link. ** It is called when an ACL connection is created. ** ** Returns void ** *******************************************************************************/ static int btm_pm_find_acl_ind(BD_ADDR remote_bda) { tACL_CONN *p = &btm_cb.acl_db[0]; UINT8 xx; for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++) { if ((p->in_use) && (!memcmp (p->remote_addr, remote_bda, BD_ADDR_LEN))) { #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2( "btm_pm_find_acl_ind ind:%d, st:%d", xx, btm_cb.pm_mode_db[xx].state); #endif break; } } return xx; } /******************************************************************************* ** ** Function btm_pm_compare_modes ** Description get the "more active" mode of the 2 ** Returns void ** *******************************************************************************/ static tBTM_PM_PWR_MD * btm_pm_compare_modes(tBTM_PM_PWR_MD *p_md1, tBTM_PM_PWR_MD *p_md2, tBTM_PM_PWR_MD *p_res) { UINT8 res; if(p_md1 == NULL) { *p_res = *p_md2; p_res->mode &= ~BTM_PM_MD_FORCE; return p_md2; } if(p_md2->mode == BTM_PM_MD_ACTIVE || p_md1->mode == BTM_PM_MD_ACTIVE) { return NULL; } /* check if force bit is involved */ if(p_md1->mode & BTM_PM_MD_FORCE) { *p_res = *p_md1; p_res->mode &= ~BTM_PM_MD_FORCE; return p_res; } if(p_md2->mode & BTM_PM_MD_FORCE) { *p_res = *p_md2; p_res->mode &= ~BTM_PM_MD_FORCE; return p_res; } res = (p_md1->mode - 1) * BTM_PM_NUM_SET_MODES + (p_md2->mode - 1); res = btm_pm_md_comp_matrix[res]; switch(res) { case BTM_PM_GET_MD1: *p_res = *p_md1; return p_md1; case BTM_PM_GET_MD2: *p_res = *p_md2; return p_md2; case BTM_PM_GET_COMP: p_res->mode = p_md1->mode; /* min of the two */ p_res->max = (p_md1->max < p_md2->max)? (p_md1->max) : (p_md2->max); /* max of the two */ p_res->min = (p_md1->min > p_md2->min)? (p_md1->min) : (p_md2->min); /* the intersection is NULL */ if( p_res->max < p_res->min) return NULL; if(p_res->mode == BTM_PM_MD_SNIFF) { /* max of the two */ p_res->attempt = (p_md1->attempt > p_md2->attempt)? (p_md1->attempt) : (p_md2->attempt); p_res->timeout = (p_md1->timeout > p_md2->timeout)? (p_md1->timeout) : (p_md2->timeout); } return p_res; } return NULL; } /******************************************************************************* ** ** Function btm_pm_get_set_mode ** Description get the resulting mode from the registered parties, then compare it ** with the requested mode, if the command is from an unregistered party. ** Returns void ** *******************************************************************************/ static tBTM_PM_MODE btm_pm_get_set_mode(UINT8 pm_id, tBTM_PM_MCB *p_cb, tBTM_PM_PWR_MD *p_mode, tBTM_PM_PWR_MD *p_res) { int xx, loop_max; tBTM_PM_PWR_MD *p_md = NULL; if(p_mode != NULL && p_mode->mode & BTM_PM_MD_FORCE) { *p_res = *p_mode; p_res->mode &= ~BTM_PM_MD_FORCE; return p_res->mode; } if(!p_mode) loop_max = BTM_MAX_PM_RECORDS+1; else loop_max = BTM_MAX_PM_RECORDS; for( xx=0; xxreq_mode[xx].mode == BTM_PM_MD_ACTIVE) { /* if at least one registered (SET) party says ACTIVE, stay active */ return BTM_PM_MD_ACTIVE; } else { /* if registered parties give conflicting information, stay active */ if( (btm_pm_compare_modes(p_md, &p_cb->req_mode[xx], p_res)) == NULL) return BTM_PM_MD_ACTIVE; p_md = p_res; } } } /* if the resulting mode is NULL(nobody registers SET), use the requested mode */ if(p_md == NULL) { if(p_mode) *p_res = *((tBTM_PM_PWR_MD *)p_mode); else /* p_mode is NULL when btm_pm_snd_md_req is called from btm_pm_proc_mode_change */ return BTM_PM_MD_ACTIVE; } else { /* if the command is from unregistered party, compare the resulting mode from registered party*/ if( (pm_id == BTM_PM_SET_ONLY_ID) && ((btm_pm_compare_modes(p_mode, p_md, p_res)) == NULL) ) return BTM_PM_MD_ACTIVE; } return p_res->mode; } /******************************************************************************* ** ** Function btm_pm_snd_md_req ** Description get the resulting mode and send the resuest to host controller ** Returns tBTM_STATUS **, BOOLEAN *p_chg_ind *******************************************************************************/ static tBTM_STATUS btm_pm_snd_md_req(UINT8 pm_id, int link_ind, tBTM_PM_PWR_MD *p_mode) { tBTM_PM_PWR_MD md_res; tBTM_PM_MODE mode; tBTM_PM_MCB *p_cb = &btm_cb.pm_mode_db[link_ind]; BOOLEAN chg_ind = FALSE; mode = btm_pm_get_set_mode(pm_id, p_cb, p_mode, &md_res); md_res.mode = mode; #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2( "btm_pm_snd_md_req link_ind:%d, mode: %d", link_ind, mode); #endif if( p_cb->state == mode) { /* already in the resulting mode */ if( (mode == BTM_PM_MD_ACTIVE) || ((md_res.max >= p_cb->interval) && (md_res.min <= p_cb->interval)) ) return BTM_CMD_STORED; /* Otherwise, needs to wake, then sleep */ chg_ind = TRUE; } p_cb->chg_ind = chg_ind; /* cannot go directly from current mode to resulting mode. */ if( mode != BTM_PM_MD_ACTIVE && p_cb->state != BTM_PM_MD_ACTIVE) p_cb->chg_ind = TRUE; /* needs to wake, then sleep */ if(p_cb->chg_ind == TRUE) /* needs to wake first */ md_res.mode = BTM_PM_MD_ACTIVE; #if (BTM_SSR_INCLUDED == TRUE) else if(BTM_PM_MD_SNIFF == md_res.mode && p_cb->max_lat) { btsnd_hcic_sniff_sub_rate(btm_cb.acl_db[link_ind].hci_handle, p_cb->max_lat, p_cb->min_rmt_to, p_cb->min_loc_to); p_cb->max_lat = 0; } #endif /* Default is failure */ btm_cb.pm_pend_link = MAX_L2CAP_LINKS; /* send the appropriate HCI command */ btm_cb.pm_pend_id = pm_id; #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2("btm_pm_snd_md_req state:0x%x, link_ind: %d", p_cb->state, link_ind); #endif switch(md_res.mode) { case BTM_PM_MD_ACTIVE: switch(p_cb->state) { case BTM_PM_MD_SNIFF: if (btsnd_hcic_exit_sniff_mode(btm_cb.acl_db[link_ind].hci_handle)) { btm_cb.pm_pend_link = link_ind; } break; case BTM_PM_MD_PARK: if (btsnd_hcic_exit_park_mode(btm_cb.acl_db[link_ind].hci_handle)) { btm_cb.pm_pend_link = link_ind; } break; default: /* Failure btm_cb.pm_pend_link = MAX_L2CAP_LINKS */ break; } break; case BTM_PM_MD_HOLD: if (btsnd_hcic_hold_mode (btm_cb.acl_db[link_ind].hci_handle, md_res.max, md_res.min)) { btm_cb.pm_pend_link = link_ind; } break; case BTM_PM_MD_SNIFF: if (btsnd_hcic_sniff_mode (btm_cb.acl_db[link_ind].hci_handle, md_res.max, md_res.min, md_res.attempt, md_res.timeout)) { btm_cb.pm_pend_link = link_ind; } break; case BTM_PM_MD_PARK: if (btsnd_hcic_park_mode (btm_cb.acl_db[link_ind].hci_handle, md_res.max, md_res.min)) { btm_cb.pm_pend_link = link_ind; } break; default: /* Failure btm_cb.pm_pend_link = MAX_L2CAP_LINKS */ break; } if(btm_cb.pm_pend_link == MAX_L2CAP_LINKS) { /* the command was not sent */ #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG1( "pm_pend_link: %d",btm_cb.pm_pend_link); #endif return (BTM_NO_RESOURCES); } return BTM_CMD_STARTED; } /******************************************************************************* ** ** Function btm_pm_check_stored ** ** Description This function is called when an HCI command status event occurs ** to check if there's any PM command issued while waiting for ** HCI command status. ** ** Returns none. ** *******************************************************************************/ static void btm_pm_check_stored(void) { int xx; for(xx=0; xx= MAX_L2CAP_LINKS) return; p_cb = &btm_cb.pm_mode_db[btm_cb.pm_pend_link]; if(status == HCI_SUCCESS) { p_cb->state = BTM_PM_ST_PENDING; pm_status = BTM_PM_STS_PENDING; #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG1( "btm_pm_proc_cmd_status new state:0x%x", p_cb->state); #endif } else /* the command was not successfull. Stay in the same state */ { pm_status = BTM_PM_STS_ERROR; } /* notify the caller is appropriate */ if( (btm_cb.pm_pend_id != BTM_PM_SET_ONLY_ID) && (btm_cb.pm_reg_db[btm_cb.pm_pend_id].mask & BTM_PM_REG_NOTIF) ) { (*btm_cb.pm_reg_db[btm_cb.pm_pend_id].cback)(btm_cb.acl_db[btm_cb.pm_pend_link].remote_addr, pm_status, 0, status); } /* no pending cmd now */ #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG3( "btm_pm_proc_cmd_status state:0x%x, pm_pend_link: %d(new: %d)", p_cb->state, btm_cb.pm_pend_link, MAX_L2CAP_LINKS); #endif btm_cb.pm_pend_link = MAX_L2CAP_LINKS; btm_pm_check_stored(); } /******************************************************************************* ** ** Function btm_process_mode_change ** ** Description This function is called when an HCI mode change event occurs. ** ** Input Parms hci_status - status of the event (HCI_SUCCESS if no errors) ** hci_handle - connection handle associated with the change ** mode - HCI_MODE_ACTIVE, HCI_MODE_HOLD, HCI_MODE_SNIFF, or HCI_MODE_PARK ** interval - number of baseband slots (meaning depends on mode) ** ** Returns none. ** *******************************************************************************/ void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, UINT16 interval) { tACL_CONN *p; tBTM_PM_MCB *p_cb = NULL; int xx, yy, zz; tBTM_PM_STATE old_state; tL2C_LCB *p_lcb; /* get the index to acl_db */ if ((xx = btm_handle_to_acl_index(hci_handle)) >= MAX_L2CAP_LINKS) return; p = &btm_cb.acl_db[xx]; /*** 2035 and 2045 work around: If mode is active and coming out of a SCO disconnect, restore packet types ***/ if (mode == HCI_MODE_ACTIVE) { if(BTM_GetNumScoLinks() == 0) { if(p->restore_pkt_types) { BTM_TRACE_DEBUG3("btm mode change AFTER unsniffing; hci hdl 0x%x, types 0x%02x/0x%02x", hci_handle, p->pkt_types_mask, p->restore_pkt_types); p->pkt_types_mask = p->restore_pkt_types; p->restore_pkt_types = 0; /* Only exists while SCO is active */ btsnd_hcic_change_conn_type (p->hci_handle, p->pkt_types_mask); } #if (BTM_PM_SNIFF_SLOT_WORK_AROUND == TRUE) else { BTM_TRACE_DEBUG2("btm mode change AFTER unsniffing; hci hdl 0x%x, types 0x%02x", hci_handle, btm_cb.btm_acl_pkt_types_supported); btm_set_packet_types (p, btm_cb.btm_acl_pkt_types_supported); } #endif } #if (BTM_PM_SNIFF_SLOT_WORK_AROUND == TRUE) else { /* Mode changed from Sniff to Active while SCO is open. */ /* Packet types of active mode, not sniff mode, should be used for ACL when SCO is closed. */ p->restore_pkt_types = btm_cb.btm_acl_pkt_types_supported; /* Exclude packet types not supported by the peer */ btm_acl_chk_peer_pkt_type_support (p, &p->restore_pkt_types); } #endif } #if (BTM_PM_SNIFF_SLOT_WORK_AROUND == TRUE) else if (mode == HCI_MODE_SNIFF) { BTM_TRACE_DEBUG1("btm mode change to sniff; hci hdl 0x%x use single slot", hci_handle); btm_set_packet_types (p, (HCI_PKT_TYPES_MASK_DM1 | HCI_PKT_TYPES_MASK_DH1)); } #endif /* update control block */ p_cb = &(btm_cb.pm_mode_db[xx]); old_state = p_cb->state; p_cb->state = mode; p_cb->interval = interval; #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG2( "btm_pm_proc_mode_change new state:0x%x (old:0x%x)", p_cb->state, old_state); #endif if ((p_cb->state == HCI_MODE_ACTIVE) && ((p_lcb = l2cu_find_lcb_by_bd_addr (p->remote_addr)) != NULL)) { /* There might be any pending packets due to SNIFF or PENDING state */ /* Trigger L2C to start transmission of the pending packets. */ BTM_TRACE_DEBUG0 ("btm mode change to active; check l2c_link for outgoing packets"); l2c_link_check_send_pkts (p_lcb, NULL, NULL); //btu_stop_timer (&p_lcb->timer_entry); } /* notify registered parties */ for(yy=0; yy<=BTM_MAX_PM_RECORDS; yy++) { /* set req_mode HOLD mode->ACTIVE */ if( (mode == BTM_PM_MD_ACTIVE) && (p_cb->req_mode[yy].mode == BTM_PM_MD_HOLD) ) p_cb->req_mode[yy].mode = BTM_PM_MD_ACTIVE; } /* new request has been made. - post a message to BTU task */ if(old_state & BTM_PM_STORED_MASK) { #if BTM_PM_DEBUG == TRUE BTM_TRACE_DEBUG1( "btm_pm_proc_mode_change: Sending stored req:%d", xx); #endif btm_pm_snd_md_req(BTM_PM_SET_ONLY_ID, xx, NULL); } else { for(zz=0; zzremote_addr, mode, interval, hci_status); } } /* If mode change was because of an active role switch or change link key */ btm_cont_rswitch_or_chglinkkey(p, btm_find_dev(p->remote_addr), hci_status); } /******************************************************************************* ** ** Function btm_pm_proc_ssr_evt ** ** Description This function is called when an HCI sniff subrating event occurs. ** ** Returns none. ** *******************************************************************************/ #if (BTM_SSR_INCLUDED == TRUE) void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len) { UINT8 status; UINT16 handle; UINT16 max_tx_lat, max_rx_lat; int xx, yy; tBTM_PM_MCB *p_cb; tACL_CONN *p_acl=NULL; UINT16 use_ssr = TRUE; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); /* get the index to acl_db */ if ((xx = btm_handle_to_acl_index(handle)) >= MAX_L2CAP_LINKS) return; STREAM_TO_UINT16 (max_tx_lat, p); STREAM_TO_UINT16 (max_rx_lat, p); p_cb = &(btm_cb.pm_mode_db[xx]); p_acl = &btm_cb.acl_db[xx]; if(p_cb->interval == max_rx_lat) { /* using legacy sniff */ use_ssr = FALSE; } /* notify registered parties */ for(yy=0; yyremote_addr, BTM_PM_STS_SSR, use_ssr, status); } } } } #endif #else /* BTM_PWR_MGR_INCLUDED == TRUE */ /******************************************************************************* ** ** Functions BTM_PmRegister, BTM_SetPowerMode, and BTM_ReadPowerMode ** ** Description Stubbed versions for BTM_PWR_MGR_INCLUDED = FALSE ** ** Returns BTM_MODE_UNSUPPORTED. ** *******************************************************************************/ tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id, tBTM_PM_STATUS_CBACK *p_cb) { return BTM_MODE_UNSUPPORTED; } tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda, tBTM_PM_PWR_MD *p_mode) { return BTM_MODE_UNSUPPORTED; } tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda, tBTM_PM_MODE *p_mode) { return BTM_MODE_UNSUPPORTED; } #endif /******************************************************************************* ** ** Function BTM_IsPowerManagerOn ** ** Description This function is called to check if power manager is included. ** in the BTE version. ** ** Returns BTM_PWR_MGR_INCLUDED. ** *******************************************************************************/ BOOLEAN BTM_IsPowerManagerOn (void) { return BTM_PWR_MGR_INCLUDED; }