/****************************************************************************** * * Copyright (C) 2002-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This interface file contains the interface to the Audio Video * Distribution Transport Protocol (AVDTP). * ******************************************************************************/ #ifndef AVDT_API_H #define AVDT_API_H #include "bt_types.h" #include "bt_target.h" /***************************************************************************** ** Constants *****************************************************************************/ #ifndef AVDT_VERSION #define AVDT_VERSION 0x0102 #endif #define AVDT_VERSION_SYNC 0x0103 /* API function return value result codes. */ #define AVDT_SUCCESS 0 /* Function successful */ #define AVDT_BAD_PARAMS 1 /* Invalid parameters */ #define AVDT_NO_RESOURCES 2 /* Not enough resources */ #define AVDT_BAD_HANDLE 3 /* Bad handle */ #define AVDT_BUSY 4 /* A procedure is already in progress */ #define AVDT_WRITE_FAIL 5 /* Write failed */ /* The index to access the codec type in codec_info[]. */ #define AVDT_CODEC_TYPE_INDEX 2 /* The size in bytes of a Adaptation Layer header. */ #define AVDT_AL_HDR_SIZE 3 /* The size in bytes of a media packet header. */ #define AVDT_MEDIA_HDR_SIZE 12 /* AVDTP 7.5.3 Adaptation Layer Fragmentation * original length of the un-fragmented transport packet should be specified by * two bytes length field of Adaptation Layer Header */ #define AVDT_MAX_MEDIA_SIZE (0xFFFF - AVDT_MEDIA_HDR_SIZE) /* The handle is used when reporting MULTI_AV specific events */ #define AVDT_MULTI_AV_HANDLE 0xFF /* The number of bytes needed by the protocol stack for the protocol headers ** of a media packet. This is the size of the media packet header, the ** L2CAP packet header and HCI header. */ #define AVDT_MEDIA_OFFSET 23 /* The marker bit is used by the application to mark significant events such ** as frame boundaries in the data stream. This constant is used to check or ** set the marker bit in the m_pt parameter of an AVDT_WriteReq() ** or AVDT_DATA_IND_EVT. */ #define AVDT_MARKER_SET 0x80 /* SEP Type. This indicates the stream endpoint type. */ #define AVDT_TSEP_SRC 0 /* Source SEP */ #define AVDT_TSEP_SNK 1 /* Sink SEP */ /* initiator/acceptor role for adaption */ #define AVDT_INT 0 /* initiator */ #define AVDT_ACP 1 /* acceptor */ /* Media Type. This indicates the media type of the stream endpoint. */ #define AVDT_MEDIA_AUDIO 0 /* Audio SEP */ #define AVDT_MEDIA_VIDEO 1 /* Video SEP */ #define AVDT_MEDIA_MULTI 2 /* Multimedia SEP */ /* for reporting packets */ #define AVDT_RTCP_PT_SR 200 /* the packet type - SR (Sender Report) */ #define AVDT_RTCP_PT_RR 201 /* the packet type - RR (Receiver Report) */ #define AVDT_RTCP_PT_SDES 202 /* the packet type - SDES (Source Description) */ typedef UINT8 AVDT_REPORT_TYPE; #define AVDT_RTCP_SDES_CNAME 1 /* SDES item CNAME */ #ifndef AVDT_MAX_CNAME_SIZE #define AVDT_MAX_CNAME_SIZE 28 #endif /* Protocol service capabilities. This indicates the protocol service ** capabilities of a stream endpoint. This value is a mask. ** Multiple values can be combined with a bitwise OR. */ #define AVDT_PSC_TRANS (1<<1) /* Media transport */ #define AVDT_PSC_REPORT (1<<2) /* Reporting */ #define AVDT_PSC_RECOV (1<<3) /* Recovery */ #define AVDT_PSC_HDRCMP (1<<5) /* Header compression */ #define AVDT_PSC_MUX (1<<6) /* Multiplexing */ #define AVDT_PSC_DELAY_RPT (1<<8) /* Delay Report */ /* Recovery type. This indicates the recovery type. */ #define AVDT_RECOV_RFC2733 1 /* RFC2733 recovery */ /* Header compression capabilities. This indicates the header compression ** capabilities. This value is a mask. Multiple values can be combined ** with a bitwise OR. */ #define AVDT_HDRCMP_MEDIA (1<<5) /* Available for media packets */ #define AVDT_HDRCMP_RECOV (1<<6) /* Available for recovery packets */ #define AVDT_HDRCMP_BACKCH (1<<7) /* Back channel supported */ /* Multiplexing capabilities mask. */ #define AVDT_MUX_FRAG (1<<7) /* Allow Adaptation Layer Fragmentation */ /* Application service category. This indicates the application ** service category. */ #define AVDT_ASC_PROTECT 4 /* Content protection */ #define AVDT_ASC_CODEC 7 /* Codec */ /* Error codes. The following are error codes defined in the AVDTP and GAVDP ** specifications. These error codes communicate protocol errors between ** AVDTP and the application. More detailed descriptions of the error codes ** and their appropriate use can be found in the AVDTP and GAVDP specifications. ** These error codes are unrelated to the result values returned by the ** AVDTP API functions. */ #define AVDT_ERR_HEADER 0x01 /* Bad packet header format */ #define AVDT_ERR_LENGTH 0x11 /* Bad packet length */ #define AVDT_ERR_SEID 0x12 /* Invalid SEID */ #define AVDT_ERR_IN_USE 0x13 /* The SEP is in use */ #define AVDT_ERR_NOT_IN_USE 0x14 /* The SEP is not in use */ #define AVDT_ERR_CATEGORY 0x17 /* Bad service category */ #define AVDT_ERR_PAYLOAD 0x18 /* Bad payload format */ #define AVDT_ERR_NSC 0x19 /* Requested command not supported */ #define AVDT_ERR_INVALID_CAP 0x1A /* Reconfigure attempted invalid capabilities */ #define AVDT_ERR_RECOV_TYPE 0x22 /* Requested recovery type not defined */ #define AVDT_ERR_MEDIA_TRANS 0x23 /* Media transport capability not correct */ #define AVDT_ERR_RECOV_FMT 0x25 /* Recovery service capability not correct */ #define AVDT_ERR_ROHC_FMT 0x26 /* Header compression service capability not correct */ #define AVDT_ERR_CP_FMT 0x27 /* Content protection service capability not correct */ #define AVDT_ERR_MUX_FMT 0x28 /* Multiplexing service capability not correct */ #define AVDT_ERR_UNSUP_CFG 0x29 /* Configuration not supported */ #define AVDT_ERR_BAD_STATE 0x31 /* Message cannot be processed in this state */ #define AVDT_ERR_REPORT_FMT 0x65 /* Report service capability not correct */ #define AVDT_ERR_SERVICE 0x80 /* Invalid service category */ #define AVDT_ERR_RESOURCE 0x81 /* Insufficient resources */ #define AVDT_ERR_INVALID_MCT 0xC1 /* Invalid Media Codec Type */ #define AVDT_ERR_UNSUP_MCT 0xC2 /* Unsupported Media Codec Type */ #define AVDT_ERR_INVALID_LEVEL 0xC3 /* Invalid Level */ #define AVDT_ERR_UNSUP_LEVEL 0xC4 /* Unsupported Level */ #define AVDT_ERR_INVALID_CP 0xE0 /* Invalid Content Protection Type */ #define AVDT_ERR_INVALID_FORMAT 0xE1 /* Invalid Content Protection format */ /* Additional error codes. This indicates error codes used by AVDTP ** in addition to the ones defined in the specifications. */ #define AVDT_ERR_CONNECT 0x07 /* Connection failed. */ #define AVDT_ERR_TIMEOUT 0x08 /* Response timeout. */ /* Control callback events. */ #define AVDT_DISCOVER_CFM_EVT 0 /* Discover confirm */ #define AVDT_GETCAP_CFM_EVT 1 /* Get capabilities confirm */ #define AVDT_OPEN_CFM_EVT 2 /* Open confirm */ #define AVDT_OPEN_IND_EVT 3 /* Open indication */ #define AVDT_CONFIG_IND_EVT 4 /* Configuration indication */ #define AVDT_START_CFM_EVT 5 /* Start confirm */ #define AVDT_START_IND_EVT 6 /* Start indication */ #define AVDT_SUSPEND_CFM_EVT 7 /* Suspend confirm */ #define AVDT_SUSPEND_IND_EVT 8 /* Suspend indication */ #define AVDT_CLOSE_CFM_EVT 9 /* Close confirm */ #define AVDT_CLOSE_IND_EVT 10 /* Close indication */ #define AVDT_RECONFIG_CFM_EVT 11 /* Reconfiguration confirm */ #define AVDT_RECONFIG_IND_EVT 12 /* Reconfiguration indication */ #define AVDT_SECURITY_CFM_EVT 13 /* Security confirm */ #define AVDT_SECURITY_IND_EVT 14 /* Security indication */ #define AVDT_WRITE_CFM_EVT 15 /* Write confirm */ #define AVDT_CONNECT_IND_EVT 16 /* Signaling channel connected */ #define AVDT_DISCONNECT_IND_EVT 17 /* Signaling channel disconnected */ #define AVDT_REPORT_CONN_EVT 18 /* Reporting channel connected */ #define AVDT_REPORT_DISCONN_EVT 19 /* Reporting channel disconnected */ #define AVDT_DELAY_REPORT_EVT 20 /* Delay report received */ #define AVDT_DELAY_REPORT_CFM_EVT 21 /* Delay report response received */ #define AVDT_MAX_EVT (AVDT_DELAY_REPORT_CFM_EVT) /* PSM for AVDT */ #define AVDT_PSM 0x0019 /* Nonsupported protocol command messages. This value is used in tAVDT_CS */ #define AVDT_NSC_SUSPEND 0x01 /* Suspend command not supported */ #define AVDT_NSC_RECONFIG 0x02 /* Reconfigure command not supported */ #define AVDT_NSC_SECURITY 0x04 /* Security command not supported */ /***************************************************************************** ** Type Definitions *****************************************************************************/ typedef struct { UINT32 ntp_sec; /* NTP time: seconds relative to 0h UTC on 1 January 1900 */ UINT32 ntp_frac; /* NTP time: the fractional part */ UINT32 rtp_time; /* timestamp in RTP header */ UINT32 pkt_count; /* sender's packet count: since starting transmission * up until the time this SR packet was generated. */ UINT32 octet_count; /* sender's octet count: same comment */ } tAVDT_SENDER_INFO; typedef struct { UINT8 frag_lost; /* fraction lost since last RR */ UINT32 packet_lost; /* cumulative number of packets lost since the beginning */ UINT32 seq_num_rcvd; /* extended highest sequence number received */ UINT32 jitter; /* interarrival jitter */ UINT32 lsr; /* last SR timestamp */ UINT32 dlsr; /* delay since last SR */ } tAVDT_REPORT_BLK; typedef union { tAVDT_SENDER_INFO sr; tAVDT_REPORT_BLK rr; UINT8 cname[AVDT_MAX_CNAME_SIZE + 1]; } tAVDT_REPORT_DATA; /* This structure contains parameters which are set at registration. */ typedef struct { UINT16 ctrl_mtu; /* L2CAP MTU of the AVDTP signaling channel */ UINT8 ret_tout; /* AVDTP signaling retransmission timeout */ UINT8 sig_tout; /* AVDTP signaling message timeout */ UINT8 idle_tout; /* AVDTP idle signaling channel timeout */ UINT8 sec_mask; /* Security mask for BTM_SetSecurityLevel() */ } tAVDT_REG; /* This structure contains the SEP information. This information is ** transferred during the discovery procedure. */ typedef struct { BOOLEAN in_use; /* TRUE if stream is currently in use */ UINT8 seid; /* Stream endpoint identifier */ UINT8 media_type; /* Media type */ UINT8 tsep; /* SEP type */ } tAVDT_SEP_INFO; /* This structure contains the SEP configuration. */ typedef struct { UINT8 codec_info[AVDT_CODEC_SIZE]; /* Codec capabilities array */ UINT8 protect_info[AVDT_PROTECT_SIZE]; /* Content protection capabilities */ UINT8 num_codec; /* Number of media codec information elements */ UINT8 num_protect; /* Number of content protection information elements */ UINT16 psc_mask; /* Protocol service capabilities mask */ UINT8 recov_type; /* Recovery type */ UINT8 recov_mrws; /* Maximum recovery window size */ UINT8 recov_mnmp; /* Recovery maximum number of media packets */ UINT8 hdrcmp_mask; /* Header compression capabilities */ #if AVDT_MULTIPLEXING == TRUE UINT8 mux_mask; /* Multiplexing capabilities. AVDT_MUX_XXX bits can be combined with a bitwise OR */ UINT8 mux_tsid_media; /* TSID for media transport session */ UINT8 mux_tcid_media; /* TCID for media transport session */ UINT8 mux_tsid_report; /* TSID for reporting transport session */ UINT8 mux_tcid_report; /* TCID for reporting transport session */ UINT8 mux_tsid_recov; /* TSID for recovery transport session */ UINT8 mux_tcid_recov; /* TCID for recovery transport session */ #endif } tAVDT_CFG; /* Header structure for callback event parameters. */ typedef struct { UINT8 err_code; /* Zero if operation succeeded; nonzero if operation failed */ UINT8 err_param; /* Error parameter included for some events */ UINT8 label; /* Transaction label */ UINT8 seid; /* For internal use only */ UINT8 sig_id; /* For internal use only */ UINT8 ccb_idx; /* For internal use only */ } tAVDT_EVT_HDR; /* This data structure is associated with the AVDT_GETCAP_CFM_EVT, ** AVDT_RECONFIG_IND_EVT, and AVDT_RECONFIG_CFM_EVT. */ typedef struct { tAVDT_EVT_HDR hdr; /* Event header */ tAVDT_CFG *p_cfg; /* Pointer to configuration for this SEP */ } tAVDT_CONFIG; /* This data structure is associated with the AVDT_CONFIG_IND_EVT. */ typedef struct { tAVDT_EVT_HDR hdr; /* Event header */ tAVDT_CFG *p_cfg; /* Pointer to configuration for this SEP */ UINT8 int_seid; /* Stream endpoint ID of stream initiating the operation */ } tAVDT_SETCONFIG; /* This data structure is associated with the AVDT_OPEN_IND_EVT and AVDT_OPEN_CFM_EVT. */ typedef struct { tAVDT_EVT_HDR hdr; /* Event header */ UINT16 peer_mtu; /* Transport channel L2CAP MTU of the peer */ UINT16 lcid; /* L2CAP LCID for media channel */ } tAVDT_OPEN; /* This data structure is associated with the AVDT_SECURITY_IND_EVT ** and AVDT_SECURITY_CFM_EVT. */ typedef struct { tAVDT_EVT_HDR hdr; /* Event header */ UINT8 *p_data; /* Pointer to security data */ UINT16 len; /* Length in bytes of the security data */ } tAVDT_SECURITY; /* This data structure is associated with the AVDT_DISCOVER_CFM_EVT. */ typedef struct { tAVDT_EVT_HDR hdr; /* Event header */ tAVDT_SEP_INFO *p_sep_info; /* Pointer to SEP information */ UINT8 num_seps; /* Number of stream endpoints */ } tAVDT_DISCOVER; /* This data structure is associated with the AVDT_DELAY_REPORT_EVT. */ typedef struct { tAVDT_EVT_HDR hdr; /* Event header */ UINT16 delay; /* Delay value */ } tAVDT_DELAY_RPT; /* Union of all control callback event data structures */ typedef union { tAVDT_EVT_HDR hdr; tAVDT_DISCOVER discover_cfm; tAVDT_CONFIG getcap_cfm; tAVDT_OPEN open_cfm; tAVDT_OPEN open_ind; tAVDT_SETCONFIG config_ind; tAVDT_EVT_HDR start_cfm; tAVDT_EVT_HDR suspend_cfm; tAVDT_EVT_HDR close_cfm; tAVDT_CONFIG reconfig_cfm; tAVDT_CONFIG reconfig_ind; tAVDT_SECURITY security_cfm; tAVDT_SECURITY security_ind; tAVDT_EVT_HDR connect_ind; tAVDT_EVT_HDR disconnect_ind; tAVDT_EVT_HDR report_conn; tAVDT_DELAY_RPT delay_rpt_cmd; } tAVDT_CTRL; /* This is the control callback function. This function passes control events ** to the application. This function is required for all registered stream ** endpoints and for the AVDT_DiscoverReq() and AVDT_GetCapReq() functions. ** */ typedef void (tAVDT_CTRL_CBACK)(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data); /* This is the data callback function. It is executed when AVDTP has a media ** packet ready for the application. This function is required for SNK ** endpoints and not applicable for SRC endpoints. */ typedef void (tAVDT_DATA_CBACK)(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp, UINT8 m_pt); #if AVDT_MULTIPLEXING == TRUE /* This is the second version of the data callback function. This version uses ** application buffer assigned by AVDT_SetMediaBuf. Caller can assign different ** buffer during callback or can leave the current buffer for further using. ** This callback is called when AVDTP has a media packet ready for the application. ** This function is required for SNK endpoints and not applicable for SRC endpoints. */ typedef void (tAVDT_MEDIA_CBACK)(UINT8 handle, UINT8 *p_payload, UINT32 payload_len, UINT32 time_stamp, UINT16 seq_num, UINT8 m_pt, UINT8 marker); #endif #if AVDT_REPORTING == TRUE /* This is the report callback function. It is executed when AVDTP has a reporting ** packet ready for the application. This function is required for streams ** created with AVDT_PSC_REPORT. */ typedef void (tAVDT_REPORT_CBACK)(UINT8 handle, AVDT_REPORT_TYPE type, tAVDT_REPORT_DATA *p_data); #endif typedef UINT16 (tAVDT_GETCAP_REQ) (BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback); /* This structure contains information required when a stream is created. ** It is passed to the AVDT_CreateStream() function. */ typedef struct { tAVDT_CFG cfg; /* SEP configuration */ tAVDT_CTRL_CBACK *p_ctrl_cback; /* Control callback function */ tAVDT_DATA_CBACK *p_data_cback; /* Data callback function */ #if AVDT_MULTIPLEXING == TRUE tAVDT_MEDIA_CBACK *p_media_cback; /* Media callback function. It will be called only if p_data_cback is NULL */ #endif #if AVDT_REPORTING == TRUE tAVDT_REPORT_CBACK *p_report_cback;/* Report callback function. */ #endif UINT16 mtu; /* The L2CAP MTU of the transport channel */ UINT16 flush_to; /* The L2CAP flush timeout of the transport channel */ UINT8 tsep; /* SEP type */ UINT8 media_type; /* Media type */ UINT16 nsc_mask; /* Nonsupported protocol command messages */ } tAVDT_CS; /***************************************************************************** ** External Function Declarations *****************************************************************************/ #ifdef __cplusplus extern "C" { #endif /******************************************************************************* ** ** Function AVDT_Register ** ** Description This is the system level registration function for the ** AVDTP protocol. This function initializes AVDTP and ** prepares the protocol stack for its use. This function ** must be called once by the system or platform using AVDTP ** before the other functions of the API an be used. ** ** ** Returns void ** *******************************************************************************/ AVDT_API extern void AVDT_Register(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function AVDT_Deregister ** ** Description This function is called to deregister use AVDTP protocol. ** It is called when AVDTP is no longer being used by any ** application in the system. Before this function can be ** called, all streams must be removed with AVDT_RemoveStream(). ** ** ** Returns void ** *******************************************************************************/ AVDT_API extern void AVDT_Deregister(void); /******************************************************************************* ** ** Function AVDT_CreateStream ** ** Description Create a stream endpoint. After a stream endpoint is ** created an application can initiate a connection between ** this endpoint and an endpoint on a peer device. In ** addition, a peer device can discover, get the capabilities, ** and connect to this endpoint. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_CreateStream(UINT8 *p_handle, tAVDT_CS *p_cs); /******************************************************************************* ** ** Function AVDT_RemoveStream ** ** Description Remove a stream endpoint. This function is called when ** the application is no longer using a stream endpoint. ** If this function is called when the endpoint is connected ** the connection is closed and then the stream endpoint ** is removed. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_RemoveStream(UINT8 handle); /******************************************************************************* ** ** Function AVDT_DiscoverReq ** ** Description This function initiates a connection to the AVDTP service ** on the peer device, if not already present, and discovers ** the stream endpoints on the peer device. (Please note ** that AVDTP discovery is unrelated to SDP discovery). ** This function can be called at any time regardless of whether ** there is an AVDTP connection to the peer device. ** ** When discovery is complete, an AVDT_DISCOVER_CFM_EVT ** is sent to the application via its callback function. ** The application must not call AVDT_GetCapReq() or ** AVDT_DiscoverReq() again to the same device until ** discovery is complete. ** ** The memory addressed by sep_info is allocated by the ** application. This memory is written to by AVDTP as part ** of the discovery procedure. This memory must remain ** accessible until the application receives the ** AVDT_DISCOVER_CFM_EVT. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_DiscoverReq(BD_ADDR bd_addr, tAVDT_SEP_INFO *p_sep_info, UINT8 max_seps, tAVDT_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function AVDT_GetCapReq ** ** Description This function initiates a connection to the AVDTP service ** on the peer device, if not already present, and gets the ** capabilities of a stream endpoint on the peer device. ** This function can be called at any time regardless of ** whether there is an AVDTP connection to the peer device. ** ** When the procedure is complete, an AVDT_GETCAP_CFM_EVT is ** sent to the application via its callback function. The ** application must not call AVDT_GetCapReq() or ** AVDT_DiscoverReq() again until the procedure is complete. ** ** The memory pointed to by p_cfg is allocated by the ** application. This memory is written to by AVDTP as part ** of the get capabilities procedure. This memory must ** remain accessible until the application receives ** the AVDT_GETCAP_CFM_EVT. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_GetCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function AVDT_GetAllCapReq ** ** Description This function initiates a connection to the AVDTP service ** on the peer device, if not already present, and gets the ** capabilities of a stream endpoint on the peer device. ** This function can be called at any time regardless of ** whether there is an AVDTP connection to the peer device. ** ** When the procedure is complete, an AVDT_GETCAP_CFM_EVT is ** sent to the application via its callback function. The ** application must not call AVDT_GetCapReq() or ** AVDT_DiscoverReq() again until the procedure is complete. ** ** The memory pointed to by p_cfg is allocated by the ** application. This memory is written to by AVDTP as part ** of the get capabilities procedure. This memory must ** remain accessible until the application receives ** the AVDT_GETCAP_CFM_EVT. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_GetAllCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function AVDT_DelayReport ** ** Description This functions sends a Delay Report to the peer device ** that is associated with a particular SEID. ** This function is called by SNK device. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_DelayReport(UINT8 handle, UINT8 seid, UINT16 delay); /******************************************************************************* ** ** Function AVDT_OpenReq ** ** Description This function initiates a connection to the AVDTP service ** on the peer device, if not already present, and connects ** to a stream endpoint on a peer device. When the connection ** is completed, an AVDT_OPEN_CFM_EVT is sent to the ** application via the control callback function for this handle. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_OpenReq(UINT8 handle, BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg); /******************************************************************************* ** ** Function AVDT_ConfigRsp ** ** Description Respond to a configure request from the peer device. This ** function must be called if the application receives an ** AVDT_CONFIG_IND_EVT through its control callback. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_ConfigRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 category); /******************************************************************************* ** ** Function AVDT_StartReq ** ** Description Start one or more stream endpoints. This initiates the ** transfer of media packets for the streams. All stream ** endpoints must previously be opened. When the streams ** are started, an AVDT_START_CFM_EVT is sent to the ** application via the control callback function for each stream. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_StartReq(UINT8 *p_handles, UINT8 num_handles); /******************************************************************************* ** ** Function AVDT_SuspendReq ** ** Description Suspend one or more stream endpoints. This suspends the ** transfer of media packets for the streams. All stream ** endpoints must previously be open and started. When the ** streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to ** the application via the control callback function for ** each stream. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_SuspendReq(UINT8 *p_handles, UINT8 num_handles); /******************************************************************************* ** ** Function AVDT_CloseReq ** ** Description Close a stream endpoint. This stops the transfer of media ** packets and closes the transport channel associated with ** this stream endpoint. When the stream is closed, an ** AVDT_CLOSE_CFM_EVT is sent to the application via the ** control callback function for this handle. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_CloseReq(UINT8 handle); /******************************************************************************* ** ** Function AVDT_ReconfigReq ** ** Description Reconfigure a stream endpoint. This allows the application ** to change the codec or content protection capabilities of ** a stream endpoint after it has been opened. This function ** can only be called if the stream is opened but not started ** or if the stream has been suspended. When the procedure ** is completed, an AVDT_RECONFIG_CFM_EVT is sent to the ** application via the control callback function for this handle. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_ReconfigReq(UINT8 handle, tAVDT_CFG *p_cfg); /******************************************************************************* ** ** Function AVDT_ReconfigRsp ** ** Description Respond to a reconfigure request from the peer device. ** This function must be called if the application receives ** an AVDT_RECONFIG_IND_EVT through its control callback. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_ReconfigRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 category); /******************************************************************************* ** ** Function AVDT_SecurityReq ** ** Description Send a security request to the peer device. When the ** security procedure is completed, an AVDT_SECURITY_CFM_EVT ** is sent to the application via the control callback function ** for this handle. (Please note that AVDTP security procedures ** are unrelated to Bluetooth link level security.) ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_SecurityReq(UINT8 handle, UINT8 *p_data, UINT16 len); /******************************************************************************* ** ** Function AVDT_SecurityRsp ** ** Description Respond to a security request from the peer device. ** This function must be called if the application receives ** an AVDT_SECURITY_IND_EVT through its control callback. ** (Please note that AVDTP security procedures are unrelated ** to Bluetooth link level security.) ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_SecurityRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 *p_data, UINT16 len); /******************************************************************************* ** ** Function AVDT_WriteReq ** ** Description Send a media packet to the peer device. The stream must ** be started before this function is called. Also, this ** function can only be called if the stream is a SRC. ** ** When AVDTP has sent the media packet and is ready for the ** next packet, an AVDT_WRITE_CFM_EVT is sent to the ** application via the control callback. The application must ** wait for the AVDT_WRITE_CFM_EVT before it makes the next ** call to AVDT_WriteReq(). If the applications calls ** AVDT_WriteReq() before it receives the event the packet ** will not be sent. The application may make its first call ** to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT ** or AVDT_START_IND_EVT. ** ** The application passes the packet using the BT_HDR structure. ** This structure is described in section 2.1. The offset ** field must be equal to or greater than AVDT_MEDIA_OFFSET. ** This allows enough space in the buffer for the L2CAP and ** AVDTP headers. ** ** The memory pointed to by p_pkt must be a GKI buffer ** allocated by the application. This buffer will be freed ** by the protocol stack; the application must not free ** this buffer. ** ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_WriteReq(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp, UINT8 m_pt); /******************************************************************************* ** ** Function AVDT_ConnectReq ** ** Description This function initiates an AVDTP signaling connection ** to the peer device. When the connection is completed, an ** AVDT_CONNECT_IND_EVT is sent to the application via its ** control callback function. If the connection attempt fails ** an AVDT_DISCONNECT_IND_EVT is sent. The security mask ** parameter overrides the outgoing security mask set in ** AVDT_Register(). ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_ConnectReq(BD_ADDR bd_addr, UINT8 sec_mask, tAVDT_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function AVDT_DisconnectReq ** ** Description This function disconnect an AVDTP signaling connection ** to the peer device. When disconnected an ** AVDT_DISCONNECT_IND_EVT is sent to the application via its ** control callback function. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_DisconnectReq(BD_ADDR bd_addr, tAVDT_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function AVDT_GetL2CapChannel ** ** Description Get the L2CAP CID used by the handle. ** ** Returns CID if successful, otherwise 0. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_GetL2CapChannel(UINT8 handle); /******************************************************************************* ** ** Function AVDT_GetSignalChannel ** ** Description Get the L2CAP CID used by the signal channel of the given handle. ** ** Returns CID if successful, otherwise 0. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_GetSignalChannel(UINT8 handle, BD_ADDR bd_addr); /******************************************************************************* ** ** Function AVDT_WriteDataReq ** ** Description Send a media packet to the peer device. The stream must ** be started before this function is called. Also, this ** function can only be called if the stream is a SRC. ** ** When AVDTP has sent the media packet and is ready for the ** next packet, an AVDT_WRITE_CFM_EVT is sent to the ** application via the control callback. The application must ** wait for the AVDT_WRITE_CFM_EVT before it makes the next ** call to AVDT_WriteDataReq(). If the applications calls ** AVDT_WriteDataReq() before it receives the event the packet ** will not be sent. The application may make its first call ** to AVDT_WriteDataReq() after it receives an ** AVDT_START_CFM_EVT or AVDT_START_IND_EVT. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_WriteDataReq(UINT8 handle, UINT8 *p_data, UINT32 data_len, UINT32 time_stamp, UINT8 m_pt, UINT8 marker); /******************************************************************************* ** ** Function AVDT_SetMediaBuf ** ** Description Assigns buffer for media packets or forbids using of assigned ** buffer if argument p_buf is NULL. This function can only ** be called if the stream is a SNK. ** ** AVDTP uses this buffer to reassemble fragmented media packets. ** When AVDTP receives a complete media packet, it calls the ** p_media_cback assigned by AVDT_CreateStream(). ** This function can be called during callback to assign a ** different buffer for next media packet or can leave the current ** buffer for next packet. ** ** Returns AVDT_SUCCESS if successful, otherwise error. ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_SetMediaBuf(UINT8 handle, UINT8 *p_buf, UINT32 buf_len); /******************************************************************************* ** ** Function AVDT_SendReport ** ** Description ** ** ** ** Returns ** *******************************************************************************/ AVDT_API extern UINT16 AVDT_SendReport(UINT8 handle, AVDT_REPORT_TYPE type, tAVDT_REPORT_DATA *p_data); /****************************************************************************** ** ** Function AVDT_SetTraceLevel ** ** Description Sets the trace level for AVDT. If 0xff is passed, the ** current trace level is returned. ** ** Input Parameters: ** new_level: The level to set the AVDT tracing to: ** 0xff-returns the current setting. ** 0-turns off tracing. ** >= 1-Errors. ** >= 2-Warnings. ** >= 3-APIs. ** >= 4-Events. ** >= 5-Debug. ** ** Returns The new trace level or current trace level if ** the input parameter is 0xff. ** ******************************************************************************/ AVDT_API extern UINT8 AVDT_SetTraceLevel (UINT8 new_level); #ifdef __cplusplus } #endif #endif /* AVDT_API_H */