/****************************************************************************** * * Copyright (C) 2009-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This interface file contains the interface to the Multi-Channel * Adaptation Protocol (MCAP). * ******************************************************************************/ #ifndef MCA_API_H #define MCA_API_H #include "bt_target.h" #include "l2c_api.h" /* move the following to bt_target.h or other place later */ #define MCA_NUM_TC_TBL ((MCA_NUM_REGS)*(MCA_NUM_LINKS)*(MCA_NUM_MDLS+1)) #define MCA_NUM_CCBS ((MCA_NUM_REGS)*(MCA_NUM_LINKS)) /* Number of control channel control blocks */ #define MCA_NUM_DCBS ((MCA_NUM_REGS)*(MCA_NUM_LINKS)*(MCA_NUM_MDLS)) /* Number of data channel control blocks */ /***************************************************************************** ** constants *****************************************************************************/ /* API function return value result codes. */ #define MCA_SUCCESS 0 /* Function successful */ #define MCA_BAD_PARAMS 1 /* Invalid parameters */ #define MCA_NO_RESOURCES 2 /* Not enough resources */ #define MCA_BAD_HANDLE 3 /* Bad handle */ #define MCA_BUSY 4 /* A procedure is already in progress */ #define MCA_WRITE_FAIL 5 /* Write failed */ #define MCA_BAD_MDL_ID 6 /* MDL ID is not valid for the current API */ typedef UINT8 tMCA_RESULT; /* MDEP data type. */ #define MCA_TDEP_ECHO 0 /* MDEP for echo test */ #define MCA_TDEP_DATA 1 /* MDEP for normal data */ /* Control callback events. */ #define MCA_ERROR_RSP_EVT 0 /* error response */ #define MCA_CREATE_IND_EVT 1 /* create mdl indication */ #define MCA_CREATE_CFM_EVT 2 /* create mdl confirm */ #define MCA_RECONNECT_IND_EVT 3 /* reconnect mdl indication */ #define MCA_RECONNECT_CFM_EVT 4 /* reconnect mdl confirm */ #define MCA_ABORT_IND_EVT 5 /* abort mdl indication */ #define MCA_ABORT_CFM_EVT 6 /* abort mdl confirm */ #define MCA_DELETE_IND_EVT 7 /* delete mdl indication */ #define MCA_DELETE_CFM_EVT 8 /* delete mdl confirm */ #define MCA_SYNC_CAP_IND_EVT 0x11 /* request sync capabilities & requirements */ #define MCA_SYNC_CAP_CFM_EVT 0x12 /* indicate completion */ #define MCA_SYNC_SET_IND_EVT 0x13 /* request to set the time-stamp clock */ #define MCA_SYNC_SET_CFM_EVT 0x14 /* indicate completion */ #define MCA_SYNC_INFO_IND_EVT 0x15 /* update of the actual time-stamp clock instant from the sync slave */ #define MCA_CONNECT_IND_EVT 0x20 /* Control channel connected */ #define MCA_DISCONNECT_IND_EVT 0x21 /* Control channel disconnected */ #define MCA_OPEN_IND_EVT 0x22 /* Data channel open indication */ #define MCA_OPEN_CFM_EVT 0x23 /* Data channel open confirm */ #define MCA_CLOSE_IND_EVT 0x24 /* Data channel close indication */ #define MCA_CLOSE_CFM_EVT 0x25 /* Data channel close confirm */ #define MCA_CONG_CHG_EVT 0x26 /* congestion change event */ #define MCA_RSP_TOUT_IND_EVT 0x27 /* Control channel message response timeout */ /***************************************************************************** ** Type Definitions *****************************************************************************/ typedef UINT8 tMCA_HANDLE; /* the handle for registration. 1 based index to rcb */ typedef UINT8 tMCA_CL; /* the handle for a control channel; reported at MCA_CONNECT_IND_EVT */ typedef UINT8 tMCA_DEP; /* the handle for MCA_CreateDep. This is also the local mdep_id */ typedef UINT16 tMCA_DL; /* the handle for the data channel. This is reported at MCA_OPEN_CFM_EVT or MCA_OPEN_IND_EVT */ /* This is the data callback function. It is executed when MCAP has a data ** packet ready for the application. */ typedef void (tMCA_DATA_CBACK)(tMCA_DL mdl, BT_HDR *p_pkt); /* This structure contains parameters which are set at registration. */ typedef struct { UINT32 rsp_tout; /* MCAP signaling response timeout */ UINT16 ctrl_psm; /* L2CAP PSM for the MCAP control channel */ UINT16 data_psm; /* L2CAP PSM for the MCAP data channel */ UINT16 sec_mask; /* Security mask for BTM_SetSecurityLevel() */ } tMCA_REG; /* This structure contains parameters to create a MDEP. */ typedef struct { UINT8 type; /* MCA_TDEP_DATA, or MCA_TDEP_ECHO. a regiatration may have only one MCA_TDEP_ECHO MDEP */ UINT8 max_mdl; /* The maximum number of MDLs for this MDEP (max is MCA_NUM_MDLS) */ tMCA_DATA_CBACK *p_data_cback; /* Data callback function */ } tMCA_CS; #define MCA_FCS_NONE 0 /* fcs_present=FALSE */ #define MCA_FCS_BYPASS 0x10 /* fcs_present=TRUE, fcs=L2CAP_CFG_FCS_BYPASS */ #define MCA_FCS_USE 0x11 /* fcs_present=TRUE, fcs=L2CAP_CFG_FCS_USE */ #define MCA_FCS_PRESNT_MASK 0x10 /* fcs_present=TRUE */ #define MCA_FCS_USE_MASK 0x01 /* mask for fcs */ typedef UINT8 tMCA_FCS_OPT; /* This structure contains L2CAP configuration parameters for the channel. */ typedef struct { tL2CAP_FCR_OPTS fcr_opt; UINT8 user_rx_pool_id; UINT8 user_tx_pool_id; UINT8 fcr_rx_pool_id; UINT8 fcr_tx_pool_id; tMCA_FCS_OPT fcs; UINT16 data_mtu; /* L2CAP MTU of the MCAP data channel */ } tMCA_CHNL_CFG; /* Header structure for callback event parameters. */ typedef struct { UINT16 mdl_id; /* The associated MDL ID */ UINT8 op_code; /* The op (request/response) code */ } tMCA_EVT_HDR; /* Response Header structure for callback event parameters. */ typedef struct { UINT16 mdl_id; /* The associated MDL ID */ UINT8 op_code; /* The op (request/response) code */ UINT8 rsp_code; /* The response code */ } tMCA_RSP_EVT; /* This data structure is associated with the MCA_CREATE_IND_EVT. */ typedef struct { UINT16 mdl_id; /* The associated MDL ID */ UINT8 op_code; /* The op (request/response) code */ UINT8 dep_id; /* MDEP ID */ UINT8 cfg; /* The configuration to negotiate */ } tMCA_CREATE_IND; /* This data structure is associated with the MCA_CREATE_CFM_EVT. */ typedef struct { UINT16 mdl_id; /* The associated MDL ID */ UINT8 op_code; /* The op (request/response) code */ UINT8 rsp_code; /* The response code. */ UINT8 cfg; /* The configuration to negotiate */ } tMCA_CREATE_CFM; /* This data structure is associated with MCA_CONNECT_IND_EVT. */ typedef struct { BD_ADDR bd_addr; /* The peer address */ UINT16 mtu; /* peer mtu */ } tMCA_CONNECT_IND; /* This data structure is associated with MCA_DISCONNECT_IND_EVT. */ typedef struct { BD_ADDR bd_addr; /* The peer address */ UINT16 reason; /* disconnect reason given by L2CAP */ } tMCA_DISCONNECT_IND; /* This data structure is associated with MCA_OPEN_IND_EVT, and MCA_OPEN_CFM_EVT. */ typedef struct { UINT16 mdl_id; /* The associated MDL ID */ tMCA_DL mdl; /* The handle for the data channel */ UINT16 mtu; /* peer mtu */ } tMCA_DL_OPEN; /* This data structure is associated with MCA_CLOSE_IND_EVT and MCA_CLOSE_CFM_EVT. */ typedef struct { UINT16 mdl_id; /* The associated MDL ID */ tMCA_DL mdl; /* The handle for the data channel */ UINT16 reason; /* disconnect reason given by L2CAP */ } tMCA_DL_CLOSE; /* This data structure is associated with MCA_CONG_CHG_EVT. */ typedef struct { UINT16 mdl_id; /* N/A - This is a place holder */ tMCA_DL mdl; /* The handle for the data channel */ BOOLEAN cong; /* TRUE, if the channel is congested */ } tMCA_CONG_CHG; /* Union of all control callback event data structures */ typedef union { tMCA_EVT_HDR hdr; tMCA_RSP_EVT rsp; tMCA_CREATE_IND create_ind; tMCA_CREATE_CFM create_cfm; tMCA_EVT_HDR reconnect_ind; tMCA_RSP_EVT reconnect_cfm; tMCA_EVT_HDR abort_ind; tMCA_RSP_EVT abort_cfm; tMCA_EVT_HDR delete_ind; tMCA_RSP_EVT delete_cfm; tMCA_CONNECT_IND connect_ind; tMCA_DISCONNECT_IND disconnect_ind; tMCA_DL_OPEN open_ind; tMCA_DL_OPEN open_cfm; tMCA_DL_CLOSE close_ind; tMCA_DL_CLOSE close_cfm; tMCA_CONG_CHG cong_chg; } tMCA_CTRL; /* This is the control callback function. This function passes control events ** to the application. */ typedef void (tMCA_CTRL_CBACK)(tMCA_HANDLE handle, tMCA_CL mcl, UINT8 event, tMCA_CTRL *p_data); /******************************************************************************* ** ** Function MCA_Init ** ** Description Initialize MCAP internal control blocks. ** This function is called at stack start up. ** ** Returns void ** *******************************************************************************/ MCA_API extern void MCA_Init(void); /******************************************************************************* ** ** Function MCA_SetTraceLevel ** ** Description This function sets the debug trace level for MCA. ** If 0xff is passed, the current trace level is returned. ** ** Input Parameters: ** level: The level to set the MCA tracing to: ** 0xff-returns the current setting. ** 0-turns off tracing. ** >= 1-Errors. ** >= 2-Warnings. ** >= 3-APIs. ** >= 4-Events. ** >= 5-Debug. ** ** Returns The new trace level or current trace level if ** the input parameter is 0xff. ** *******************************************************************************/ MCA_API extern UINT8 MCA_SetTraceLevel (UINT8 level); /******************************************************************************* ** ** Function MCA_Register ** ** Description This function registers an MCAP implementation. ** It is assumed that the control channel PSM and data channel ** PSM are not used by any other instances of the stack. ** If the given p_reg->ctrl_psm is 0, this handle is INT only. ** ** Returns 0, if failed. Otherwise, the MCA handle. ** *******************************************************************************/ MCA_API extern tMCA_HANDLE MCA_Register(tMCA_REG *p_reg, tMCA_CTRL_CBACK *p_cback); /******************************************************************************* ** ** Function MCA_Deregister ** ** Description This function is called to deregister an MCAP implementation. ** Before this function can be called, all control and data ** channels must be removed with MCA_DisconnectReq and MCA_CloseReq. ** ** Returns void ** *******************************************************************************/ MCA_API extern void MCA_Deregister(tMCA_HANDLE handle); /******************************************************************************* ** ** Function MCA_CreateDep ** ** Description Create a data endpoint. If the MDEP is created successfully, ** the MDEP ID is returned in *p_dep. After a data endpoint is ** created, an application can initiate a connection between this ** endpoint and an endpoint on a peer device. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_CreateDep(tMCA_HANDLE handle, tMCA_DEP *p_dep, tMCA_CS *p_cs); /******************************************************************************* ** ** Function MCA_DeleteDep ** ** Description Delete a data endpoint. This function is called when ** the implementation is no longer using a data endpoint. ** If this function is called when the endpoint is connected ** the connection is closed and the data endpoint ** is removed. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_DeleteDep(tMCA_HANDLE handle, tMCA_DEP dep); /******************************************************************************* ** ** Function MCA_ConnectReq ** ** Description This function initiates an MCAP control channel connection ** to the peer device. When the connection is completed, an ** MCA_CONNECT_IND_EVT is reported to the application via its ** control callback function. ** This control channel is identified by tMCA_CL. ** If the connection attempt fails, an MCA_DISCONNECT_IND_EVT is ** reported. The security mask parameter overrides the outgoing ** security mask set in MCA_Register(). ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_ConnectReq(tMCA_HANDLE handle, BD_ADDR bd_addr, UINT16 ctrl_psm, UINT16 sec_mask); /******************************************************************************* ** ** Function MCA_DisconnectReq ** ** Description This function disconnect an MCAP control channel ** to the peer device. ** If associated data channel exists, they are disconnected. ** When the MCL is disconnected an MCA_DISCONNECT_IND_EVT is ** reported to the application via its control callback function. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_DisconnectReq(tMCA_CL mcl); /******************************************************************************* ** ** Function MCA_CreateMdl ** ** Description This function sends a CREATE_MDL request to the peer device. ** When the response is received, a MCA_CREATE_CFM_EVT is reported ** with the given MDL ID. ** If the response is successful, a data channel is open ** with the given p_chnl_cfg ** When the data channel is open successfully, a MCA_OPEN_CFM_EVT ** is reported. This data channel is identified as tMCA_DL. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_CreateMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm, UINT16 mdl_id, UINT8 peer_dep_id, UINT8 cfg, const tMCA_CHNL_CFG *p_chnl_cfg); /******************************************************************************* ** ** Function MCA_CreateMdlRsp ** ** Description This function sends a CREATE_MDL response to the peer device ** in response to a received MCA_CREATE_IND_EVT. ** If the rsp_code is successful, a data channel is open ** with the given p_chnl_cfg ** When the data channel is open successfully, a MCA_OPEN_IND_EVT ** is reported. This data channel is identified as tMCA_DL. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_CreateMdlRsp(tMCA_CL mcl, tMCA_DEP dep, UINT16 mdl_id, UINT8 cfg, UINT8 rsp_code, const tMCA_CHNL_CFG *p_chnl_cfg); /******************************************************************************* ** ** Function MCA_CloseReq ** ** Description Close a data channel. When the channel is closed, an ** MCA_CLOSE_CFM_EVT is sent to the application via the ** control callback function for this handle. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_CloseReq(tMCA_DL mdl); /******************************************************************************* ** ** Function MCA_ReconnectMdl ** ** Description This function sends a RECONNECT_MDL request to the peer device. ** When the response is received, a MCA_RECONNECT_CFM_EVT is reported. ** If the response is successful, a data channel is open. ** When the data channel is open successfully, a MCA_OPEN_CFM_EVT ** is reported. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_ReconnectMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm, UINT16 mdl_id, const tMCA_CHNL_CFG *p_chnl_cfg); /******************************************************************************* ** ** Function MCA_ReconnectMdlRsp ** ** Description This function sends a RECONNECT_MDL response to the peer device ** in response to a MCA_RECONNECT_IND_EVT event. ** If the response is successful, a data channel is open. ** When the data channel is open successfully, a MCA_OPEN_IND_EVT ** is reported. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_ReconnectMdlRsp(tMCA_CL mcl, tMCA_DEP dep, UINT16 mdl_id, UINT8 rsp_code, const tMCA_CHNL_CFG *p_chnl_cfg); /******************************************************************************* ** ** Function MCA_DataChnlCfg ** ** Description This function initiates a data channel connection toward the ** connected peer device. ** When the data channel is open successfully, a MCA_OPEN_CFM_EVT ** is reported. This data channel is identified as tMCA_DL. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_DataChnlCfg(tMCA_CL mcl, const tMCA_CHNL_CFG *p_chnl_cfg); /******************************************************************************* ** ** Function MCA_Abort ** ** Description This function sends a ABORT_MDL request to the peer device. ** When the response is received, a MCA_ABORT_CFM_EVT is reported. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_Abort(tMCA_CL mcl); /******************************************************************************* ** ** Function MCA_Delete ** ** Description This function sends a DELETE_MDL request to the peer device. ** When the response is received, a MCA_DELETE_CFM_EVT is reported. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_Delete(tMCA_CL mcl, UINT16 mdl_id); /******************************************************************************* ** ** Function MCA_WriteReq ** ** Description Send a data packet to the peer device. ** ** The application passes the packet using the BT_HDR structure. ** The offset field must be equal to or greater than L2CAP_MIN_OFFSET. ** This allows enough space in the buffer for the L2CAP header. ** ** The memory pointed to by p_pkt must be a GKI buffer ** allocated by the application. This buffer will be freed ** by the protocol stack; the application must not free ** this buffer. ** ** Returns MCA_SUCCESS if successful, otherwise error. ** *******************************************************************************/ MCA_API extern tMCA_RESULT MCA_WriteReq(tMCA_DL mdl, BT_HDR *p_pkt); /******************************************************************************* ** ** Function MCA_GetL2CapChannel ** ** Description Get the L2CAP CID used by the given data channel handle. ** ** Returns L2CAP channel ID if successful, otherwise 0. ** *******************************************************************************/ MCA_API extern UINT16 MCA_GetL2CapChannel (tMCA_DL mdl); #endif /* MCA_API_H */