/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This file contains functions that handle the SDP server functions. * This is mainly dealing with client requests * ******************************************************************************/ #include #include #include #include "gki.h" #include "bt_types.h" #include "btu.h" #include "l2cdefs.h" #include "hcidefs.h" #include "hcimsgs.h" #include "sdp_api.h" #include "sdpint.h" #if SDP_SERVER_ENABLED == TRUE /* Maximum number of bytes to reserve out of SDP MTU for response data */ #define SDP_MAX_SERVICE_RSPHDR_LEN 12 #define SDP_MAX_SERVATTR_RSPHDR_LEN 10 #define SDP_MAX_ATTR_RSPHDR_LEN 10 /********************************************************************************/ /* L O C A L F U N C T I O N P R O T O T Y P E S */ /********************************************************************************/ static void process_service_search (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 param_len, UINT8 *p_req, UINT8 *p_req_end); static void process_service_attr_req (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 param_len, UINT8 *p_req, UINT8 *p_req_end); static void process_service_search_attr_req (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 param_len, UINT8 *p_req, UINT8 *p_req_end); /********************************************************************************/ /* E R R O R T E X T S T R I N G S */ /* */ /* The default is to have no text string, but we allow the strings to be */ /* configured in target.h if people want them. */ /********************************************************************************/ #ifndef SDP_TEXT_BAD_HEADER #define SDP_TEXT_BAD_HEADER NULL #endif #ifndef SDP_TEXT_BAD_PDU #define SDP_TEXT_BAD_PDU NULL #endif #ifndef SDP_TEXT_BAD_UUID_LIST #define SDP_TEXT_BAD_UUID_LIST NULL #endif #ifndef SDP_TEXT_BAD_HANDLE #define SDP_TEXT_BAD_HANDLE NULL #endif #ifndef SDP_TEXT_BAD_ATTR_LIST #define SDP_TEXT_BAD_ATTR_LIST NULL #endif #ifndef SDP_TEXT_BAD_CONT_LEN #define SDP_TEXT_BAD_CONT_LEN NULL #endif #ifndef SDP_TEXT_BAD_CONT_INX #define SDP_TEXT_BAD_CONT_INX NULL #endif /******************************************************************************* ** ** Function sdp_server_handle_client_req ** ** Description This is the main dispatcher of the SDP server. It is called ** when any data is received from L2CAP, and dispatches the ** request to the appropriate handler. ** ** Returns void ** *******************************************************************************/ void sdp_server_handle_client_req (tCONN_CB *p_ccb, BT_HDR *p_msg) { UINT8 *p_req = (UINT8 *) (p_msg + 1) + p_msg->offset; UINT8 *p_req_end = p_req + p_msg->len; UINT8 pdu_id; UINT16 trans_num, param_len; /* Start inactivity timer */ btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT); /* The first byte in the message is the pdu type */ pdu_id = *p_req++; /* Extract the transaction number and parameter length */ BE_STREAM_TO_UINT16 (trans_num, p_req); BE_STREAM_TO_UINT16 (param_len, p_req); if ((p_req + param_len) > p_req_end) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_PDU_SIZE, SDP_TEXT_BAD_HEADER); return; } switch (pdu_id) { case SDP_PDU_SERVICE_SEARCH_REQ: process_service_search (p_ccb, trans_num, param_len, p_req, p_req_end); break; case SDP_PDU_SERVICE_ATTR_REQ: process_service_attr_req (p_ccb, trans_num, param_len, p_req, p_req_end); break; case SDP_PDU_SERVICE_SEARCH_ATTR_REQ: process_service_search_attr_req (p_ccb, trans_num, param_len, p_req, p_req_end); break; default: sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_PDU); SDP_TRACE_WARNING1 ("SDP - server got unknown PDU: 0x%x", pdu_id); break; } } /******************************************************************************* ** ** Function process_service_search ** ** Description This function handles a service search request from the ** client. It builds a reply message with info from the database, ** and sends the reply back to the client. ** ** Returns void ** *******************************************************************************/ static void process_service_search (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 param_len, UINT8 *p_req, UINT8 *p_req_end) { UINT16 max_replies, cur_handles, rem_handles, cont_offset; tSDP_UUID_SEQ uid_seq; UINT8 *p_rsp, *p_rsp_start, *p_rsp_param_len; UINT16 rsp_param_len, num_rsp_handles, xx; UINT32 rsp_handles[SDP_MAX_RECORDS]; tSDP_RECORD *p_rec = NULL; BT_HDR *p_buf; BOOLEAN is_cont = FALSE; p_req = sdpu_extract_uid_seq (p_req, param_len, &uid_seq); if ((!p_req) || (!uid_seq.num_uids)) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_UUID_LIST); return; } /* Get the max replies we can send. Cap it at our max anyways. */ BE_STREAM_TO_UINT16 (max_replies, p_req); if (max_replies > SDP_MAX_RECORDS) max_replies = SDP_MAX_RECORDS; /* Get a list of handles that match the UUIDs given to us */ for (num_rsp_handles = 0; num_rsp_handles < max_replies; ) { p_rec = sdp_db_service_search (p_rec, &uid_seq); if (p_rec) rsp_handles[num_rsp_handles++] = p_rec->record_handle; else break; } /* Check if this is a continuation request */ if (*p_req) { if (*p_req++ != SDP_CONTINUATION_LEN) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_LEN); return; } BE_STREAM_TO_UINT16 (cont_offset, p_req); if (cont_offset != p_ccb->cont_offset) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_INX); return; } rem_handles = num_rsp_handles - cont_offset; /* extract the remaining handles */ } else { rem_handles = num_rsp_handles; cont_offset = 0; } /* Calculate how many handles will fit in one PDU */ cur_handles = (UINT16)((p_ccb->rem_mtu_size - SDP_MAX_SERVICE_RSPHDR_LEN) / 4); if (rem_handles <= cur_handles) cur_handles = rem_handles; else /* Continuation is set */ { p_ccb->cont_offset += cur_handles; is_cont = TRUE; } /* Get a buffer to use to build the response */ if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL) { SDP_TRACE_ERROR0 ("SDP - no buf for search rsp"); return; } p_buf->offset = L2CAP_MIN_OFFSET; p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET; /* Start building a rsponse */ UINT8_TO_BE_STREAM (p_rsp, SDP_PDU_SERVICE_SEARCH_RSP); UINT16_TO_BE_STREAM (p_rsp, trans_num); /* Skip the length, we need to add it at the end */ p_rsp_param_len = p_rsp; p_rsp += 2; /* Put in total and current number of handles, and handles themselves */ UINT16_TO_BE_STREAM (p_rsp, num_rsp_handles); UINT16_TO_BE_STREAM (p_rsp, cur_handles); /* SDP_TRACE_DEBUG5("SDP Service Rsp: tothdl %d, curhdlr %d, start %d, end %d, cont %d", num_rsp_handles, cur_handles, cont_offset, cont_offset + cur_handles-1, is_cont); */ for (xx = cont_offset; xx < cont_offset + cur_handles; xx++) UINT32_TO_BE_STREAM (p_rsp, rsp_handles[xx]); if (is_cont) { UINT8_TO_BE_STREAM (p_rsp, SDP_CONTINUATION_LEN); UINT16_TO_BE_STREAM (p_rsp, p_ccb->cont_offset); } else UINT8_TO_BE_STREAM (p_rsp, 0); /* Go back and put the parameter length into the buffer */ rsp_param_len = p_rsp - p_rsp_param_len - 2; UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len); /* Set the length of the SDP data in the buffer */ p_buf->len = p_rsp - p_rsp_start; /* Send the buffer through L2CAP */ L2CA_DataWrite (p_ccb->connection_id, p_buf); } /******************************************************************************* ** ** Function process_service_attr_req ** ** Description This function handles an attribute request from the client. ** It builds a reply message with info from the database, ** and sends the reply back to the client. ** ** Returns void ** *******************************************************************************/ static void process_service_attr_req (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 param_len, UINT8 *p_req, UINT8 *p_req_end) { UINT16 max_list_len, len_to_send, cont_offset; INT16 rem_len; tSDP_ATTR_SEQ attr_seq, attr_seq_sav; UINT8 *p_rsp, *p_rsp_start, *p_rsp_param_len; UINT16 rsp_param_len, xx; UINT32 rec_handle; tSDP_RECORD *p_rec; tSDP_ATTRIBUTE *p_attr; BT_HDR *p_buf; BOOLEAN is_cont = FALSE; UINT16 attr_len; /* Extract the record handle */ BE_STREAM_TO_UINT32 (rec_handle, p_req); if (p_req > p_req_end) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_SERV_REC_HDL, SDP_TEXT_BAD_HANDLE); return; } /* Get the max list length we can send. Cap it at MTU size minus overhead */ BE_STREAM_TO_UINT16 (max_list_len, p_req); if (max_list_len > (p_ccb->rem_mtu_size - SDP_MAX_ATTR_RSPHDR_LEN)) max_list_len = p_ccb->rem_mtu_size - SDP_MAX_ATTR_RSPHDR_LEN; p_req = sdpu_extract_attr_seq (p_req, param_len, &attr_seq); if ((!p_req) || (!attr_seq.num_attr) || (p_req > p_req_end)) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_ATTR_LIST); return; } memcpy(&attr_seq_sav, &attr_seq, sizeof(tSDP_ATTR_SEQ)) ; /* Find a record with the record handle */ p_rec = sdp_db_find_record (rec_handle); if (!p_rec) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_SERV_REC_HDL, SDP_TEXT_BAD_HANDLE); return; } /* Check if this is a continuation request */ if (*p_req) { if (*p_req++ != SDP_CONTINUATION_LEN) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_LEN); return; } BE_STREAM_TO_UINT16 (cont_offset, p_req); if (cont_offset != p_ccb->cont_offset) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_INX); return; } if (!p_ccb->rsp_list) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL); return; } is_cont = TRUE; /* Initialise for continuation response */ p_rsp = &p_ccb->rsp_list[0]; attr_seq.attr_entry[p_ccb->cont_info.next_attr_index].start = p_ccb->cont_info.next_attr_start_id; } else { /* Get a scratch buffer to store response */ if (!p_ccb->rsp_list) { p_ccb->rsp_list = (UINT8 *)GKI_getbuf (max_list_len); if (p_ccb->rsp_list == NULL) { SDP_TRACE_ERROR0 ("SDP - no scratch buf for search rsp"); return; } } p_ccb->cont_offset = 0; p_rsp = &p_ccb->rsp_list[3]; /* Leave space for data elem descr */ /* Reset continuation parameters in p_ccb */ p_ccb->cont_info.prev_sdp_rec = NULL; p_ccb->cont_info.next_attr_index = 0; p_ccb->cont_info.attr_offset = 0; } /* Search for attributes that match the list given to us */ for (xx = p_ccb->cont_info.next_attr_index; xx < attr_seq.num_attr; xx++) { p_attr = sdp_db_find_attr_in_rec (p_rec, attr_seq.attr_entry[xx].start, attr_seq.attr_entry[xx].end); if (p_attr) { /* Check if attribute fits. Assume 3-byte value type/length */ rem_len = max_list_len - (INT16) (p_rsp - &p_ccb->rsp_list[0]); /* just in case */ if (rem_len <= 0) { p_ccb->cont_info.next_attr_index = xx; p_ccb->cont_info.next_attr_start_id = p_attr->id; break; } attr_len = sdpu_get_attrib_entry_len(p_attr); /* if there is a partial attribute pending to be sent */ if (p_ccb->cont_info.attr_offset) { p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, rem_len, &p_ccb->cont_info.attr_offset); /* If the partial attrib could not been fully added yet */ if (p_ccb->cont_info.attr_offset != attr_len) break; else /* If the partial attrib has been added in full by now */ p_ccb->cont_info.attr_offset = 0; /* reset attr_offset */ } else if (rem_len < attr_len) /* Not enough space for attr... so add partially */ { if (attr_len >= MAX_ATTR_LEN) { SDP_TRACE_ERROR2("SDP attr too big: max_list_len=%d,attr_len=%d", max_list_len, attr_len); sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL); return; } /* add the partial attribute if possible */ p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, (UINT16)rem_len, &p_ccb->cont_info.attr_offset); p_ccb->cont_info.next_attr_index = xx; p_ccb->cont_info.next_attr_start_id = p_attr->id; break; } else /* build the whole attribute */ p_rsp = sdpu_build_attrib_entry (p_rsp, p_attr); /* If doing a range, stick with this one till no more attributes found */ if (attr_seq.attr_entry[xx].start != attr_seq.attr_entry[xx].end) { /* Update for next time through */ attr_seq.attr_entry[xx].start = p_attr->id + 1; xx--; } } } /* If all the attributes have been accomodated in p_rsp, reset next_attr_index */ if (xx == attr_seq.num_attr) p_ccb->cont_info.next_attr_index = 0; len_to_send = (UINT16) (p_rsp - &p_ccb->rsp_list[0]); cont_offset = 0; if (!is_cont) { p_ccb->list_len = sdpu_get_attrib_seq_len(p_rec, &attr_seq_sav) + 3; /* Put in the sequence header (2 or 3 bytes) */ if (p_ccb->list_len > 255) { p_ccb->rsp_list[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD); p_ccb->rsp_list[1] = (UINT8) ((p_ccb->list_len - 3) >> 8); p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3); } else { cont_offset = 1; p_ccb->rsp_list[1] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE); p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3); p_ccb->list_len--; len_to_send--; } } /* Get a buffer to use to build the response */ if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL) { SDP_TRACE_ERROR0 ("SDP - no buf for search rsp"); return; } p_buf->offset = L2CAP_MIN_OFFSET; p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET; /* Start building a rsponse */ UINT8_TO_BE_STREAM (p_rsp, SDP_PDU_SERVICE_ATTR_RSP); UINT16_TO_BE_STREAM (p_rsp, trans_num); /* Skip the parameter length, add it when we know the length */ p_rsp_param_len = p_rsp; p_rsp += 2; UINT16_TO_BE_STREAM (p_rsp, len_to_send); memcpy (p_rsp, &p_ccb->rsp_list[cont_offset], len_to_send); p_rsp += len_to_send; p_ccb->cont_offset += len_to_send; /* If anything left to send, continuation needed */ if (p_ccb->cont_offset < p_ccb->list_len) { is_cont = TRUE; UINT8_TO_BE_STREAM (p_rsp, SDP_CONTINUATION_LEN); UINT16_TO_BE_STREAM (p_rsp, p_ccb->cont_offset); } else UINT8_TO_BE_STREAM (p_rsp, 0); /* Go back and put the parameter length into the buffer */ rsp_param_len = p_rsp - p_rsp_param_len - 2; UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len); /* Set the length of the SDP data in the buffer */ p_buf->len = p_rsp - p_rsp_start; /* Send the buffer through L2CAP */ L2CA_DataWrite (p_ccb->connection_id, p_buf); } /******************************************************************************* ** ** Function process_service_search_attr_req ** ** Description This function handles a combined service search and attribute ** read request from the client. It builds a reply message with ** info from the database, and sends the reply back to the client. ** ** Returns void ** *******************************************************************************/ static void process_service_search_attr_req (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 param_len, UINT8 *p_req, UINT8 *p_req_end) { UINT16 max_list_len; INT16 rem_len; UINT16 len_to_send, cont_offset; tSDP_UUID_SEQ uid_seq; UINT8 *p_rsp, *p_rsp_start, *p_rsp_param_len; UINT16 rsp_param_len, xx; tSDP_RECORD *p_rec; tSDP_ATTR_SEQ attr_seq, attr_seq_sav; tSDP_ATTRIBUTE *p_attr; BT_HDR *p_buf; BOOLEAN maxxed_out = FALSE, is_cont = FALSE; UINT8 *p_seq_start; UINT16 seq_len, attr_len; /* Extract the UUID sequence to search for */ p_req = sdpu_extract_uid_seq (p_req, param_len, &uid_seq); if ((!p_req) || (!uid_seq.num_uids)) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_UUID_LIST); return; } /* Get the max list length we can send. Cap it at our max list length. */ BE_STREAM_TO_UINT16 (max_list_len, p_req); if (max_list_len > (p_ccb->rem_mtu_size - SDP_MAX_SERVATTR_RSPHDR_LEN)) max_list_len = p_ccb->rem_mtu_size - SDP_MAX_SERVATTR_RSPHDR_LEN; p_req = sdpu_extract_attr_seq (p_req, param_len, &attr_seq); if ((!p_req) || (!attr_seq.num_attr)) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_ATTR_LIST); return; } memcpy(&attr_seq_sav, &attr_seq, sizeof(tSDP_ATTR_SEQ)) ; /* Check if this is a continuation request */ if (*p_req) { if (*p_req++ != SDP_CONTINUATION_LEN) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_LEN); return; } BE_STREAM_TO_UINT16 (cont_offset, p_req); if (cont_offset != p_ccb->cont_offset) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_INX); return; } if (!p_ccb->rsp_list) { sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL); return; } is_cont = TRUE; /* Initialise for continuation response */ p_rsp = &p_ccb->rsp_list[0]; attr_seq.attr_entry[p_ccb->cont_info.next_attr_index].start = p_ccb->cont_info.next_attr_start_id; } else { /* Get a scratch buffer to store response */ if (!p_ccb->rsp_list) { p_ccb->rsp_list = (UINT8 *)GKI_getbuf (max_list_len); if (p_ccb->rsp_list == NULL) { SDP_TRACE_ERROR0 ("SDP - no scratch buf for search rsp"); return; } } p_ccb->cont_offset = 0; p_rsp = &p_ccb->rsp_list[3]; /* Leave space for data elem descr */ /* Reset continuation parameters in p_ccb */ p_ccb->cont_info.prev_sdp_rec = NULL; p_ccb->cont_info.next_attr_index = 0; p_ccb->cont_info.last_attr_seq_desc_sent = FALSE; p_ccb->cont_info.attr_offset = 0; } /* Get a list of handles that match the UUIDs given to us */ for (p_rec = sdp_db_service_search (p_ccb->cont_info.prev_sdp_rec, &uid_seq); p_rec; p_rec = sdp_db_service_search (p_rec, &uid_seq)) { /* Allow space for attribute sequence type and length */ p_seq_start = p_rsp; if (p_ccb->cont_info.last_attr_seq_desc_sent == FALSE) { /* See if there is enough room to include a new service in the current response */ rem_len = max_list_len - (INT16) (p_rsp - &p_ccb->rsp_list[0]); if (rem_len < 3) { /* Not enough room. Update continuation info for next response */ p_ccb->cont_info.next_attr_index = 0; p_ccb->cont_info.next_attr_start_id = attr_seq.attr_entry[0].start; break; } p_rsp += 3; } /* Get a list of handles that match the UUIDs given to us */ for (xx = p_ccb->cont_info.next_attr_index; xx < attr_seq.num_attr; xx++) { p_attr = sdp_db_find_attr_in_rec (p_rec, attr_seq.attr_entry[xx].start, attr_seq.attr_entry[xx].end); if (p_attr) { /* Check if attribute fits. Assume 3-byte value type/length */ rem_len = max_list_len - (INT16) (p_rsp - &p_ccb->rsp_list[0]); /* just in case */ if (rem_len <= 0) { p_ccb->cont_info.next_attr_index = xx; p_ccb->cont_info.next_attr_start_id = p_attr->id; maxxed_out = TRUE; break; } attr_len = sdpu_get_attrib_entry_len(p_attr); /* if there is a partial attribute pending to be sent */ if (p_ccb->cont_info.attr_offset) { p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, rem_len, &p_ccb->cont_info.attr_offset); /* If the partial attrib could not been fully added yet */ if (p_ccb->cont_info.attr_offset != attr_len) { maxxed_out = TRUE; break; } else /* If the partial attrib has been added in full by now */ p_ccb->cont_info.attr_offset = 0; /* reset attr_offset */ } else if (rem_len < attr_len) /* Not enough space for attr... so add partially */ { if (attr_len >= MAX_ATTR_LEN) { SDP_TRACE_ERROR2("SDP attr too big: max_list_len=%d,attr_len=%d", max_list_len, attr_len); sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL); return; } /* add the partial attribute if possible */ p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, (UINT16)rem_len, &p_ccb->cont_info.attr_offset); p_ccb->cont_info.next_attr_index = xx; p_ccb->cont_info.next_attr_start_id = p_attr->id; maxxed_out = TRUE; break; } else /* build the whole attribute */ p_rsp = sdpu_build_attrib_entry (p_rsp, p_attr); /* If doing a range, stick with this one till no more attributes found */ if (attr_seq.attr_entry[xx].start != attr_seq.attr_entry[xx].end) { /* Update for next time through */ attr_seq.attr_entry[xx].start = p_attr->id + 1; xx--; } } } /* Go back and put the type and length into the buffer */ if (p_ccb->cont_info.last_attr_seq_desc_sent == FALSE) { seq_len = sdpu_get_attrib_seq_len(p_rec, &attr_seq_sav); if (seq_len != 0) { UINT8_TO_BE_STREAM (p_seq_start, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD); UINT16_TO_BE_STREAM (p_seq_start, seq_len); if (maxxed_out) p_ccb->cont_info.last_attr_seq_desc_sent = TRUE; } else p_rsp = p_seq_start; } if (maxxed_out) break; /* Restore the attr_seq to look for in the next sdp record */ memcpy(&attr_seq, &attr_seq_sav, sizeof(tSDP_ATTR_SEQ)) ; /* Reset the next attr index */ p_ccb->cont_info.next_attr_index = 0; p_ccb->cont_info.prev_sdp_rec = p_rec; p_ccb->cont_info.last_attr_seq_desc_sent = FALSE; } /* response length */ len_to_send = (UINT16) (p_rsp - &p_ccb->rsp_list[0]); cont_offset = 0; /* If first response, insert sequence header */ if (!is_cont) { /* Get the total list length for requested uid and attribute sequence */ p_ccb->list_len = sdpu_get_list_len(&uid_seq, &attr_seq_sav) + 3; /* Put in the sequence header (2 or 3 bytes) */ if (p_ccb->list_len > 255) { p_ccb->rsp_list[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD); p_ccb->rsp_list[1] = (UINT8) ((p_ccb->list_len - 3) >> 8); p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3); } else { cont_offset = 1; p_ccb->rsp_list[1] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE); p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3); p_ccb->list_len--; len_to_send--; } } /* Get a buffer to use to build the response */ if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL) { SDP_TRACE_ERROR0 ("SDP - no buf for search rsp"); return; } p_buf->offset = L2CAP_MIN_OFFSET; p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET; /* Start building a rsponse */ UINT8_TO_BE_STREAM (p_rsp, SDP_PDU_SERVICE_SEARCH_ATTR_RSP); UINT16_TO_BE_STREAM (p_rsp, trans_num); /* Skip the parameter length, add it when we know the length */ p_rsp_param_len = p_rsp; p_rsp += 2; /* Stream the list length to send */ UINT16_TO_BE_STREAM (p_rsp, len_to_send); /* copy from rsp_list to the actual buffer to be sent */ memcpy (p_rsp, &p_ccb->rsp_list[cont_offset], len_to_send); p_rsp += len_to_send; p_ccb->cont_offset += len_to_send; /* If anything left to send, continuation needed */ if (p_ccb->cont_offset < p_ccb->list_len) { is_cont = TRUE; UINT8_TO_BE_STREAM (p_rsp, SDP_CONTINUATION_LEN); UINT16_TO_BE_STREAM (p_rsp, p_ccb->cont_offset); } else UINT8_TO_BE_STREAM (p_rsp, 0); /* Go back and put the parameter length into the buffer */ rsp_param_len = p_rsp - p_rsp_param_len - 2; UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len); /* Set the length of the SDP data in the buffer */ p_buf->len = p_rsp - p_rsp_start; /* Send the buffer through L2CAP */ L2CA_DataWrite (p_ccb->connection_id, p_buf); } #endif /* SDP_SERVER_ENABLED == TRUE */