/* ssl/ssl.h */ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. * ECC cipher suite support in OpenSSL originally developed by * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. */ /* ==================================================================== * Copyright 2005 Nokia. All rights reserved. * * The portions of the attached software ("Contribution") is developed by * Nokia Corporation and is licensed pursuant to the OpenSSL open source * license. * * The Contribution, originally written by Mika Kousa and Pasi Eronen of * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites * support (see RFC 4279) to OpenSSL. * * No patent licenses or other rights except those expressly stated in * the OpenSSL open source license shall be deemed granted or received * expressly, by implication, estoppel, or otherwise. * * No assurances are provided by Nokia that the Contribution does not * infringe the patent or other intellectual property rights of any third * party or that the license provides you with all the necessary rights * to make use of the Contribution. * * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR * OTHERWISE. */ #ifndef OPENSSL_HEADER_SSL_H #define OPENSSL_HEADER_SSL_H #include #include #include #include #include #include #include #include #if !defined(OPENSSL_WINDOWS) #include #endif /* wpa_supplicant expects to get the version functions from ssl.h */ #include /* Forward-declare struct timeval. On Windows, it is defined in winsock2.h and * Windows headers define too many macros to be included in public headers. * However, only a forward declaration is needed. */ struct timeval; #if defined(__cplusplus) extern "C" { #endif /* SSL implementation. */ /* Initialization. */ /* SSL_library_init initializes the crypto and SSL libraries and returns one. */ OPENSSL_EXPORT int SSL_library_init(void); /* Cipher suites. * * |SSL_CIPHER| objects represent cipher suites. */ DECLARE_STACK_OF(SSL_CIPHER) /* SSL_get_cipher_by_value returns the structure representing a TLS cipher * suite based on its assigned number, or NULL if unknown. See * https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-4. */ OPENSSL_EXPORT const SSL_CIPHER *SSL_get_cipher_by_value(uint16_t value); /* SSL_CIPHER_get_id returns |cipher|'s id. It may be cast to a |uint16_t| to * get the cipher suite value. */ OPENSSL_EXPORT uint32_t SSL_CIPHER_get_id(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AES returns one if |cipher| uses AES (either GCM or CBC * mode). */ OPENSSL_EXPORT int SSL_CIPHER_is_AES(const SSL_CIPHER *cipher); /* SSL_CIPHER_has_MD5_HMAC returns one if |cipher| uses HMAC-MD5. */ OPENSSL_EXPORT int SSL_CIPHER_has_MD5_HMAC(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AESGCM returns one if |cipher| uses AES-GCM. */ OPENSSL_EXPORT int SSL_CIPHER_is_AESGCM(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_CHACHA20POLY1305 returns one if |cipher| uses * CHACHA20_POLY1305. */ OPENSSL_EXPORT int SSL_CIPHER_is_CHACHA20POLY1305(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_NULL returns one if |cipher| does not encrypt. */ OPENSSL_EXPORT int SSL_CIPHER_is_NULL(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_RC4 returns one if |cipher| uses RC4. */ OPENSSL_EXPORT int SSL_CIPHER_is_RC4(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_block_cipher returns one if |cipher| is a block cipher. */ OPENSSL_EXPORT int SSL_CIPHER_is_block_cipher(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_name returns the OpenSSL name of |cipher|. */ OPENSSL_EXPORT const char *SSL_CIPHER_get_name(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_kx_name returns a string that describes the key-exchange * method used by |cipher|. For example, "ECDHE_ECDSA". */ OPENSSL_EXPORT const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_rfc_name returns a newly-allocated string with the standard * name for |cipher| or NULL on error. For example, * "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256". The caller is responsible for * calling |OPENSSL_free| on the result. */ OPENSSL_EXPORT char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_bits returns the strength, in bits, of |cipher|. If * |out_alg_bits| is not NULL, it writes the number of bits consumed by the * symmetric algorithm to |*out_alg_bits|. */ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher, int *out_alg_bits); /* SSL contexts. * * |SSL_CTX| objects manage shared state and configuration between multiple TLS * or DTLS connections. Whether the connections are TLS or DTLS is selected by * an |SSL_METHOD| on creation. * * |SSL_CTX| are reference-counted and may be shared by connections across * multiple threads. Once shared, functions which change the |SSL_CTX|'s * configuration may not be used. */ /* TLS_method is the |SSL_METHOD| used for TLS (and SSLv3) connections. */ OPENSSL_EXPORT const SSL_METHOD *TLS_method(void); /* DTLS_method is the |SSL_METHOD| used for DTLS connections. */ OPENSSL_EXPORT const SSL_METHOD *DTLS_method(void); /* SSL_CTX_new returns a newly-allocated |SSL_CTX| with default settings or NULL * on error. */ OPENSSL_EXPORT SSL_CTX *SSL_CTX_new(const SSL_METHOD *method); /* SSL_CTX_free releases memory associated with |ctx|. */ OPENSSL_EXPORT void SSL_CTX_free(SSL_CTX *ctx); /* SSL connections. * * An |SSL| object represents a single TLS or DTLS connection. Although the * shared |SSL_CTX| is thread-safe, an |SSL| is not thread-safe and may only be * used on one thread at a time. */ /* SSL_new returns a newly-allocated |SSL| using |ctx| or NULL on error. The new * connection inherits settings from |ctx| at the time of creation. Settings may * also be individually configured on the connection. * * On creation, an |SSL| is not configured to be either a client or server. Call * |SSL_set_connect_state| or |SSL_set_accept_state| to set this. */ OPENSSL_EXPORT SSL *SSL_new(SSL_CTX *ctx); /* SSL_free releases memory associated with |ssl|. */ OPENSSL_EXPORT void SSL_free(SSL *ssl); /* SSL_set_connect_state configures |ssl| to be a client. */ OPENSSL_EXPORT void SSL_set_connect_state(SSL *ssl); /* SSL_set_accept_state configures |ssl| to be a server. */ OPENSSL_EXPORT void SSL_set_accept_state(SSL *ssl); /* SSL_is_server returns one if |ssl| is configured as a server and zero * otherwise. */ OPENSSL_EXPORT int SSL_is_server(SSL *ssl); /* SSL_set_bio configures |ssl| to read from |rbio| and write to |wbio|. |ssl| * takes ownership of the two |BIO|s. If |rbio| and |wbio| are the same, |ssl| * only takes ownership of one reference. * * Calling this function on an already-configured |ssl| is deprecated. */ OPENSSL_EXPORT void SSL_set_bio(SSL *ssl, BIO *rbio, BIO *wbio); /* SSL_get_rbio returns the |BIO| that |ssl| reads from. */ OPENSSL_EXPORT BIO *SSL_get_rbio(const SSL *ssl); /* SSL_get_wbio returns the |BIO| that |ssl| writes to. */ OPENSSL_EXPORT BIO *SSL_get_wbio(const SSL *ssl); /* SSL_do_handshake continues the current handshake. If there is none or the * handshake has completed or False Started, it returns one. Otherwise, it * returns <= 0. The caller should pass the value into |SSL_get_error| to * determine how to proceed. * * TODO(davidben): Ensure 0 is only returned on transport EOF. * https://crbug.com/466303. */ OPENSSL_EXPORT int SSL_do_handshake(SSL *ssl); /* SSL_connect configures |ssl| as a client, if unconfigured, and calls * |SSL_do_handshake|. */ OPENSSL_EXPORT int SSL_connect(SSL *ssl); /* SSL_accept configures |ssl| as a server, if unconfigured, and calls * |SSL_do_handshake|. */ OPENSSL_EXPORT int SSL_accept(SSL *ssl); /* SSL_read reads up to |num| bytes from |ssl| into |buf|. It implicitly runs * any pending handshakes, including renegotiations when enabled. On success, it * returns the number of bytes read. Otherwise, it returns <= 0. The caller * should pass the value into |SSL_get_error| to determine how to proceed. * * TODO(davidben): Ensure 0 is only returned on transport EOF. * https://crbug.com/466303. */ OPENSSL_EXPORT int SSL_read(SSL *ssl, void *buf, int num); /* SSL_peek behaves like |SSL_read| but does not consume any bytes returned. */ OPENSSL_EXPORT int SSL_peek(SSL *ssl, void *buf, int num); /* SSL_write writes up to |num| bytes from |buf| into |ssl|. It implicitly runs * any pending handshakes, including renegotiations when enabled. On success, it * returns the number of bytes read. Otherwise, it returns <= 0. The caller * should pass the value into |SSL_get_error| to determine how to proceed. * * A non-blocking |SSL_write| differs from non-blocking |write| in that a failed * |SSL_write| still commits to the data passed in. When retrying, the caller * must supply the original write buffer (or a larger one containing the * original as a prefix). By default, retries will fail if they also do not * reuse the same |buf| pointer. This may be relaxed with * |SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER|, but the buffer contents still must be * unchanged. * * By default, |SSL_write| will not return success until all |num| bytes are * written. This may be relaxed with |SSL_MODE_ENABLE_PARTIAL_WRITE|. It allows * |SSL_write| to complete with a partial result when only part of the input was * written in a single record. * * TODO(davidben): Ensure 0 is only returned on transport EOF. * https://crbug.com/466303. */ OPENSSL_EXPORT int SSL_write(SSL *ssl, const void *buf, int num); /* SSL_shutdown shuts down |ssl|. On success, it completes in two stages. First, * it returns 0 if |ssl| completed uni-directional shutdown; close_notify has * been sent, but the peer's close_notify has not been received. Most callers * may stop at this point. For bi-directional shutdown, call |SSL_shutdown| * again. It returns 1 if close_notify has been both sent and received. * * If the peer's close_notify arrived first, the first stage is skipped. * |SSL_shutdown| will return 1 once close_notify is sent and skip 0. Callers * only interested in uni-directional shutdown must therefore allow for the * first stage returning either 0 or 1. * * |SSL_shutdown| returns -1 on failure. The caller should pass the return value * into |SSL_get_error| to determine how to proceed. If the underlying |BIO| is * non-blocking, both stages may require retry. * * |SSL_shutdown| must be called to retain |ssl|'s session in the session * cache. Use |SSL_CTX_set_quiet_shutdown| to configure |SSL_shutdown| to * neither send nor wait for close_notify but still retain the session. * * TODO(davidben): Is there any point in the session cache interaction? Remove * it? */ OPENSSL_EXPORT int SSL_shutdown(SSL *ssl); /* SSL_get_error returns a |SSL_ERROR_*| value for the most recent operation on * |ssl|. It should be called after an operation failed to determine. */ OPENSSL_EXPORT int SSL_get_error(const SSL *ssl, int ret_code); /* SSL_ERROR_NONE indicates the operation succeeded. */ #define SSL_ERROR_NONE 0 /* SSL_ERROR_SSL indicates the operation failed within the library. The caller * may inspect the error queue for more information. */ #define SSL_ERROR_SSL 1 /* SSL_ERROR_WANT_READ indicates the operation failed attempting to read from * the transport. The caller may retry the operation when the transport is ready * for reading. */ #define SSL_ERROR_WANT_READ 2 /* SSL_ERROR_WANT_READ indicates the operation failed attempting to write to * the transport. The caller may retry the operation when the transport is ready * for writing. */ #define SSL_ERROR_WANT_WRITE 3 /* SSL_ERROR_WANT_X509_LOOKUP indicates the operation failed in calling the * |cert_cb| or |client_cert_cb|. The caller may retry the operation when the * callback is ready to return a certificate or one has been configured * externally. * * See also |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb|. */ #define SSL_ERROR_WANT_X509_LOOKUP 4 /* SSL_ERROR_WANT_SYSCALL indicates the operation failed externally to the * library. The caller should consult the system-specific error mechanism. This * is typically |errno| but may be something custom if using a custom |BIO|. It * may also be signaled if the transport returned EOF, in which case the * operation's return value will be zero. */ #define SSL_ERROR_SYSCALL 5 /* SSL_ERROR_ZERO_RETURN indicates the operation failed because the connection * was cleanly shut down with a close_notify alert. */ #define SSL_ERROR_ZERO_RETURN 6 /* SSL_ERROR_WANT_CONNECT indicates the operation failed attempting to connect * the transport (the |BIO| signaled |BIO_RR_CONNECT|). The caller may retry the * operation when the transport is ready. */ #define SSL_ERROR_WANT_CONNECT 7 /* SSL_ERROR_WANT_ACCEPT indicates the operation failed attempting to accept a * connection from the transport (the |BIO| signaled |BIO_RR_ACCEPT|). The * caller may retry the operation when the transport is ready. * * TODO(davidben): Remove this. It's used by accept BIOs which are bizarre. */ #define SSL_ERROR_WANT_ACCEPT 8 /* SSL_ERROR_WANT_CHANNEL_ID_LOOKUP indicates the operation failed looking up * the Channel ID key. The caller may retry the operation when |channel_id_cb| * is ready to return a key or one has been configured with * |SSL_set1_tls_channel_id|. * * See also |SSL_CTX_set_channel_id_cb|. */ #define SSL_ERROR_WANT_CHANNEL_ID_LOOKUP 9 /* SSL_ERROR_PENDING_SESSION indicates the operation failed because the session * lookup callback indicated the session was unavailable. The caller may retry * the operation when lookup has completed. * * See also |SSL_CTX_sess_set_get_cb| and |SSL_magic_pending_session_ptr|. */ #define SSL_ERROR_PENDING_SESSION 11 /* SSL_ERROR_PENDING_CERTIFICATE indicates the operation failed because the * early callback indicated certificate lookup was incomplete. The caller may * retry the operation when lookup has completed. Note: when the operation is * retried, the early callback will not be called a second time. * * See also |select_certificate_cb| on |SSL_CTX|. */ #define SSL_ERROR_PENDING_CERTIFICATE 12 /* SSL_ERROR_WANT_PRIVATE_KEY_OPERATION indicates the operation failed because * a private key operation was unfinished. The caller may retry the operation * when the private key operation is complete. * * See also |SSL_set_private_key_method|. */ #define SSL_ERROR_WANT_PRIVATE_KEY_OPERATION 13 /* Protocol versions. */ #define DTLS1_VERSION_MAJOR 0xfe #define SSL3_VERSION_MAJOR 0x03 #define SSL3_VERSION 0x0300 #define TLS1_VERSION 0x0301 #define TLS1_1_VERSION 0x0302 #define TLS1_2_VERSION 0x0303 #define DTLS1_VERSION 0xfeff #define DTLS1_2_VERSION 0xfefd /* SSL_CTX_set_min_version sets the minimum protocol version for |ctx| to * |version|. */ OPENSSL_EXPORT void SSL_CTX_set_min_version(SSL_CTX *ctx, uint16_t version); /* SSL_CTX_set_max_version sets the maximum protocol version for |ctx| to * |version|. */ OPENSSL_EXPORT void SSL_CTX_set_max_version(SSL_CTX *ctx, uint16_t version); /* SSL_set_min_version sets the minimum protocol version for |ssl| to * |version|. */ OPENSSL_EXPORT void SSL_set_min_version(SSL *ssl, uint16_t version); /* SSL_set_max_version sets the maximum protocol version for |ssl| to * |version|. */ OPENSSL_EXPORT void SSL_set_max_version(SSL *ssl, uint16_t version); /* SSL_version returns the TLS or DTLS protocol version used by |ssl|, which is * one of the |*_VERSION| values. (E.g. |TLS1_2_VERSION|.) Before the version * is negotiated, the result is undefined. */ OPENSSL_EXPORT int SSL_version(const SSL *ssl); /* Options. * * Options configure protocol behavior. */ /* SSL_OP_LEGACY_SERVER_CONNECT allows initial connections to servers that don't * support the renegotiation_info extension (RFC 5746). It is on by default. */ #define SSL_OP_LEGACY_SERVER_CONNECT 0x00000004L /* SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER allows for record sizes |SSL3_RT_MAX_EXTRA| * bytes above the maximum record size. */ #define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L /* SSL_OP_TLS_D5_BUG accepts an RSAClientKeyExchange in TLS encoded as in SSL3 * (i.e. without a length prefix). */ #define SSL_OP_TLS_D5_BUG 0x00000100L /* SSL_OP_ALL enables the above bug workarounds that are enabled by many * consumers. * TODO(davidben): Determine which of the remaining may be removed now. */ #define SSL_OP_ALL 0x00000BFFL /* SSL_OP_NO_QUERY_MTU, in DTLS, disables querying the MTU from the underlying * |BIO|. Instead, the MTU is configured with |SSL_set_mtu|. */ #define SSL_OP_NO_QUERY_MTU 0x00001000L /* SSL_OP_NO_TICKET disables session ticket support (RFC 5077). */ #define SSL_OP_NO_TICKET 0x00004000L /* SSL_OP_CIPHER_SERVER_PREFERENCE configures servers to select ciphers and * ECDHE curves according to the server's preferences instead of the * client's. */ #define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L /* SSL_CTX_set_options enables all options set in |options| (which should be one * or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a * bitmask representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_CTX_set_options(SSL_CTX *ctx, uint32_t options); /* SSL_CTX_clear_options disables all options set in |options| (which should be * one or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a * bitmask representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_CTX_clear_options(SSL_CTX *ctx, uint32_t options); /* SSL_CTX_get_options returns a bitmask of |SSL_OP_*| values that represent all * the options enabled for |ctx|. */ OPENSSL_EXPORT uint32_t SSL_CTX_get_options(const SSL_CTX *ctx); /* SSL_set_options enables all options set in |options| (which should be one or * more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a bitmask * representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_set_options(SSL *ssl, uint32_t options); /* SSL_clear_options disables all options set in |options| (which should be one * or more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a * bitmask representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_clear_options(SSL *ssl, uint32_t options); /* SSL_get_options returns a bitmask of |SSL_OP_*| values that represent all the * options enabled for |ssl|. */ OPENSSL_EXPORT uint32_t SSL_get_options(const SSL *ssl); /* Modes. * * Modes configure API behavior. */ /* SSL_MODE_ENABLE_PARTIAL_WRITE allows |SSL_write| to complete with a partial * result when the only part of the input was written in a single record. */ #define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L /* SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER allows retrying an incomplete |SSL_write| * with a different buffer. However, |SSL_write| still assumes the buffer * contents are unchanged. This is not the default to avoid the misconception * that non-blocking |SSL_write| behaves like non-blocking |write|. */ #define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L /* SSL_MODE_NO_AUTO_CHAIN disables automatically building a certificate chain * before sending certificates to the peer. * TODO(davidben): Remove this behavior. https://crbug.com/486295. */ #define SSL_MODE_NO_AUTO_CHAIN 0x00000008L /* SSL_MODE_ENABLE_FALSE_START allows clients to send application data before * receipt of CCS and Finished. This mode enables full-handshakes to 'complete' * in one RTT. See draft-bmoeller-tls-falsestart-01. */ #define SSL_MODE_ENABLE_FALSE_START 0x00000080L /* SSL_MODE_CBC_RECORD_SPLITTING causes multi-byte CBC records in SSL 3.0 and * TLS 1.0 to be split in two: the first record will contain a single byte and * the second will contain the remainder. This effectively randomises the IV and * prevents BEAST attacks. */ #define SSL_MODE_CBC_RECORD_SPLITTING 0x00000100L /* SSL_MODE_NO_SESSION_CREATION will cause any attempts to create a session to * fail with SSL_R_SESSION_MAY_NOT_BE_CREATED. This can be used to enforce that * session resumption is used for a given SSL*. */ #define SSL_MODE_NO_SESSION_CREATION 0x00000200L /* SSL_MODE_SEND_FALLBACK_SCSV sends TLS_FALLBACK_SCSV in the ClientHello. * To be set only by applications that reconnect with a downgraded protocol * version; see RFC 7507 for details. * * DO NOT ENABLE THIS if your application attempts a normal handshake. Only use * this in explicit fallback retries, following the guidance in RFC 7507. */ #define SSL_MODE_SEND_FALLBACK_SCSV 0x00000400L /* SSL_CTX_set_mode enables all modes set in |mode| (which should be one or more * of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a bitmask * representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_CTX_set_mode(SSL_CTX *ctx, uint32_t mode); /* SSL_CTX_clear_mode disables all modes set in |mode| (which should be one or * more of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a * bitmask representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_CTX_clear_mode(SSL_CTX *ctx, uint32_t mode); /* SSL_CTX_get_mode returns a bitmask of |SSL_MODE_*| values that represent all * the modes enabled for |ssl|. */ OPENSSL_EXPORT uint32_t SSL_CTX_get_mode(const SSL_CTX *ctx); /* SSL_set_mode enables all modes set in |mode| (which should be one or more of * the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask * representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_set_mode(SSL *ssl, uint32_t mode); /* SSL_clear_mode disables all modes set in |mode| (which should be one or more * of the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask * representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_clear_mode(SSL *ssl, uint32_t mode); /* SSL_get_mode returns a bitmask of |SSL_MODE_*| values that represent all the * modes enabled for |ssl|. */ OPENSSL_EXPORT uint32_t SSL_get_mode(const SSL *ssl); /* Configuring certificates and private keys. * * These functions configure the connection's leaf certificate, private key, and * certificate chain. The certificate chain is ordered leaf to root (as sent on * the wire) but does not include the leaf. Both client and server certificates * use these functions. * * Certificates and keys may be configured before the handshake or dynamically * in the early callback and certificate callback. */ /* SSL_CTX_use_certificate sets |ctx|'s leaf certificate to |x509|. It returns * one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x509); /* SSL_use_certificate sets |ssl|'s leaf certificate to |x509|. It returns one * on success and zero on failure. */ OPENSSL_EXPORT int SSL_use_certificate(SSL *ssl, X509 *x509); /* SSL_CTX_use_PrivateKey sets |ctx|'s private key to |pkey|. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey); /* SSL_use_PrivateKey sets |ssl|'s private key to |pkey|. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey); /* SSL_CTX_set0_chain sets |ctx|'s certificate chain, excluding the leaf, to * |chain|. On success, it returns one and takes ownership of |chain|. * Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_CTX_set0_chain(SSL_CTX *ctx, STACK_OF(X509) *chain); /* SSL_CTX_set1_chain sets |ctx|'s certificate chain, excluding the leaf, to * |chain|. It returns one on success and zero on failure. The caller retains * ownership of |chain| and may release it freely. */ OPENSSL_EXPORT int SSL_CTX_set1_chain(SSL_CTX *ctx, STACK_OF(X509) *chain); /* SSL_set0_chain sets |ssl|'s certificate chain, excluding the leaf, to * |chain|. On success, it returns one and takes ownership of |chain|. * Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_set0_chain(SSL *ssl, STACK_OF(X509) *chain); /* SSL_set1_chain sets |ssl|'s certificate chain, excluding the leaf, to * |chain|. It returns one on success and zero on failure. The caller retains * ownership of |chain| and may release it freely. */ OPENSSL_EXPORT int SSL_set1_chain(SSL *ssl, STACK_OF(X509) *chain); /* SSL_CTX_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On * success, it returns one and takes ownership of |x509|. Otherwise, it returns * zero. */ OPENSSL_EXPORT int SSL_CTX_add0_chain_cert(SSL_CTX *ctx, X509 *x509); /* SSL_CTX_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It * returns one on success and zero on failure. The caller retains ownership of * |x509| and may release it freely. */ OPENSSL_EXPORT int SSL_CTX_add1_chain_cert(SSL_CTX *ctx, X509 *x509); /* SSL_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On success, * it returns one and takes ownership of |x509|. Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_add0_chain_cert(SSL *ssl, X509 *x509); /* SSL_CTX_add_extra_chain_cert calls |SSL_CTX_add0_chain_cert|. */ OPENSSL_EXPORT int SSL_CTX_add_extra_chain_cert(SSL_CTX *ctx, X509 *x509); /* SSL_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It returns * one on success and zero on failure. The caller retains ownership of |x509| * and may release it freely. */ OPENSSL_EXPORT int SSL_add1_chain_cert(SSL *ssl, X509 *x509); /* SSL_CTX_clear_chain_certs clears |ctx|'s certificate chain and returns * one. */ OPENSSL_EXPORT int SSL_CTX_clear_chain_certs(SSL_CTX *ctx); /* SSL_CTX_clear_extra_chain_certs calls |SSL_CTX_clear_chain_certs|. */ OPENSSL_EXPORT int SSL_CTX_clear_extra_chain_certs(SSL_CTX *ctx); /* SSL_clear_chain_certs clears |ssl|'s certificate chain and returns one. */ OPENSSL_EXPORT int SSL_clear_chain_certs(SSL *ssl); /* SSL_CTX_set_cert_cb sets a callback that is called to select a certificate. * The callback returns one on success, zero on internal error, and a negative * number on failure or to pause the handshake. If the handshake is paused, * |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|. */ OPENSSL_EXPORT void SSL_CTX_set_cert_cb(SSL_CTX *ctx, int (*cb)(SSL *ssl, void *arg), void *arg); /* SSL_set_cert_cb sets a callback that is called to select a certificate. The * callback returns one on success, zero on internal error, and a negative * number on failure or to pause the handshake. If the handshake is paused, * |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|. */ OPENSSL_EXPORT void SSL_set_cert_cb(SSL *ssl, int (*cb)(SSL *ssl, void *arg), void *arg); /* SSL_certs_clear resets the private key, leaf certificate, and certificate * chain of |ssl|. */ OPENSSL_EXPORT void SSL_certs_clear(SSL *ssl); /* SSL_CTX_check_private_key returns one if the certificate and private key * configured in |ctx| are consistent and zero otherwise. */ OPENSSL_EXPORT int SSL_CTX_check_private_key(const SSL_CTX *ctx); /* SSL_check_private_key returns one if the certificate and private key * configured in |ssl| are consistent and zero otherwise. */ OPENSSL_EXPORT int SSL_check_private_key(const SSL *ssl); /* SSL_CTX_get0_certificate returns |ctx|'s leaf certificate. */ OPENSSL_EXPORT X509 *SSL_CTX_get0_certificate(const SSL_CTX *ctx); /* SSL_get_certificate returns |ssl|'s leaf certificate. */ OPENSSL_EXPORT X509 *SSL_get_certificate(const SSL *ssl); /* SSL_CTX_get0_privatekey returns |ctx|'s private key. */ OPENSSL_EXPORT EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx); /* SSL_get_privatekey returns |ssl|'s private key. */ OPENSSL_EXPORT EVP_PKEY *SSL_get_privatekey(const SSL *ssl); /* SSL_CTX_get0_chain_certs sets |*out_chain| to |ctx|'s certificate chain and * returns one. */ OPENSSL_EXPORT int SSL_CTX_get0_chain_certs(const SSL_CTX *ctx, STACK_OF(X509) **out_chain); /* SSL_CTX_get_extra_chain_certs calls |SSL_CTX_get0_chain_certs|. */ OPENSSL_EXPORT int SSL_CTX_get_extra_chain_certs(const SSL_CTX *ctx, STACK_OF(X509) **out_chain); /* SSL_get0_chain_certs sets |*out_chain| to |ssl|'s certificate chain and * returns one. */ OPENSSL_EXPORT int SSL_get0_chain_certs(const SSL *ssl, STACK_OF(X509) **out_chain); /* SSL_CTX_set_signed_cert_timestamp_list sets the list of signed certificate * timestamps that is sent to clients that request it. The |list| argument must * contain one or more SCT structures serialised as a SignedCertificateTimestamp * List (see https://tools.ietf.org/html/rfc6962#section-3.3) – i.e. each SCT * is prefixed by a big-endian, uint16 length and the concatenation of one or * more such prefixed SCTs are themselves also prefixed by a uint16 length. It * returns one on success and zero on error. The caller retains ownership of * |list|. */ OPENSSL_EXPORT int SSL_CTX_set_signed_cert_timestamp_list(SSL_CTX *ctx, const uint8_t *list, size_t list_len); /* SSL_CTX_set_ocsp_response sets the OCSP reponse that is sent to clients * which request it. It returns one on success and zero on error. The caller * retains ownership of |response|. */ OPENSSL_EXPORT int SSL_CTX_set_ocsp_response(SSL_CTX *ctx, const uint8_t *response, size_t response_len); /* SSL_set_private_key_digest_prefs copies |num_digests| NIDs from |digest_nids| * into |ssl|. These digests will be used, in decreasing order of preference, * when signing with |ssl|'s private key. It returns one on success and zero on * error. */ OPENSSL_EXPORT int SSL_set_private_key_digest_prefs(SSL *ssl, const int *digest_nids, size_t num_digests); /* Certificate and private key convenience functions. */ /* SSL_CTX_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one * on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); /* SSL_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); /* The following functions configure certificates or private keys but take as * input DER-encoded structures. They return one on success and zero on * failure. */ OPENSSL_EXPORT int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const uint8_t *d); OPENSSL_EXPORT int SSL_use_certificate_ASN1(SSL *ssl, const uint8_t *der, int len); OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_ASN1(int pk, SSL_CTX *ctx, const uint8_t *d, long len); OPENSSL_EXPORT int SSL_use_PrivateKey_ASN1(int type, SSL *ssl, const uint8_t *d, long len); OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const uint8_t *der, size_t der_len); OPENSSL_EXPORT int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, const uint8_t *der, size_t der_len); /* The following functions configure certificates or private keys but take as * input files to read from. They return one on success and zero on failure. The * |type| parameter is one of the |SSL_FILETYPE_*| values and determines whether * the file's contents are read as PEM or DER. */ #define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 #define SSL_FILETYPE_PEM X509_FILETYPE_PEM OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type); OPENSSL_EXPORT int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); OPENSSL_EXPORT int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type); OPENSSL_EXPORT int SSL_use_certificate_file(SSL *ssl, const char *file, int type); OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type); OPENSSL_EXPORT int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); /* SSL_CTX_use_certificate_file configures certificates for |ctx|. It reads the * contents of |file| as a PEM-encoded leaf certificate followed optionally by * the certificate chain to send to the peer. It returns one on success and zero * on failure. */ OPENSSL_EXPORT int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* SSL_CTX_set_default_passwd_cb sets the password callback for PEM-based * convenience functions called on |ctx|. */ OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb); /* SSL_CTX_set_default_passwd_cb_userdata sets the userdata parameter for * |ctx|'s password callback. */ OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *data); /* Custom private keys. */ enum ssl_private_key_result_t { ssl_private_key_success, ssl_private_key_retry, ssl_private_key_failure, }; /* SSL_PRIVATE_KEY_METHOD describes private key hooks. This is used to off-load * signing operations to a custom, potentially asynchronous, backend. */ typedef struct ssl_private_key_method_st { /* type returns either |EVP_PKEY_RSA| or |EVP_PKEY_EC| to denote the type of * key used by |ssl|. */ int (*type)(SSL *ssl); /* max_signature_len returns the maximum length of a signature signed by the * key used by |ssl|. This must be a constant value for a given |ssl|. */ size_t (*max_signature_len)(SSL *ssl); /* sign signs |in_len| bytes of digest from |in|. |md| is the hash function * used to calculate |in|. On success, it returns |ssl_private_key_success| * and writes at most |max_out| bytes of signature data to |out|. On failure, * it returns |ssl_private_key_failure|. If the operation has not completed, * it returns |ssl_private_key_retry|. |sign| should arrange for the * high-level operation on |ssl| to be retried when the operation is * completed. This will result in a call to |sign_complete|. * * If the key is an RSA key, implementations must use PKCS#1 padding. |in| is * the digest itself, so the DigestInfo prefix, if any, must be prepended by * |sign|. If |md| is |EVP_md5_sha1|, there is no prefix. * * It is an error to call |sign| while another private key operation is in * progress on |ssl|. */ enum ssl_private_key_result_t (*sign)(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out, const EVP_MD *md, const uint8_t *in, size_t in_len); /* sign_complete completes a pending |sign| operation. If the operation has * completed, it returns |ssl_private_key_success| and writes the result to * |out| as in |sign|. Otherwise, it returns |ssl_private_key_failure| on * failure and |ssl_private_key_retry| if the operation is still in progress. * * |sign_complete| may be called arbitrarily many times before completion, but * it is an error to call |sign_complete| if there is no pending |sign| * operation in progress on |ssl|. */ enum ssl_private_key_result_t (*sign_complete)(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out); } SSL_PRIVATE_KEY_METHOD; /* SSL_set_private_key_method configures a custom private key on |ssl|. * |key_method| must remain valid for the lifetime of |ssl|. */ OPENSSL_EXPORT void SSL_set_private_key_method( SSL *ssl, const SSL_PRIVATE_KEY_METHOD *key_method); /* Connection information. */ /* SSL_get_peer_certificate returns the peer's leaf certificate or NULL if the * peer did not use certificates. The caller must call |X509_free| on the * result to release it. */ OPENSSL_EXPORT X509 *SSL_get_peer_certificate(const SSL *ssl); /* SSL_get_peer_cert_chain returns the peer's certificate chain or NULL if * unavailable or the peer did not use certificates. For historical reasons, * this may not be available if resuming a serialized |SSL_SESSION|. The caller * does not take ownership of the result. * * WARNING: This function behaves differently between client and server. If * |ssl| is a server, the returned chain does not include the leaf certificate. * If a client, it does. */ OPENSSL_EXPORT STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *ssl); /* SSL_get_tls_unique writes at most |max_out| bytes of the tls-unique value * for |ssl| to |out| and sets |*out_len| to the number of bytes written. It * returns one on success or zero on error. In general |max_out| should be at * least 12. * * This function will always fail if the initial handshake has not completed. * The tls-unique value will change after a renegotiation but, since * renegotiations can be initiated by the server at any point, the higher-level * protocol must either leave them disabled or define states in which the * tls-unique value can be read. * * The tls-unique value is defined by * https://tools.ietf.org/html/rfc5929#section-3.1. Due to a weakness in the * TLS protocol, tls-unique is broken for resumed connections unless the * Extended Master Secret extension is negotiated. Thus this function will * return zero if |ssl| performed session resumption unless EMS was used when * negotiating the original session. */ OPENSSL_EXPORT int SSL_get_tls_unique(const SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out); /* SSL_get_extms_support returns one if the Extended Master Secret * extension was negotiated. Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_get_extms_support(const SSL *ssl); /* SSL_get_current_cipher returns the cipher used in the current outgoing * connection state, or NULL if the null cipher is active. */ OPENSSL_EXPORT const SSL_CIPHER *SSL_get_current_cipher(const SSL *ssl); /* SSL_session_reused returns one if |ssl| performed an abbreviated handshake * and zero otherwise. * * TODO(davidben): Hammer down the semantics of this API while a handshake, * initial or renego, is in progress. */ OPENSSL_EXPORT int SSL_session_reused(const SSL *ssl); /* SSL_get_secure_renegotiation_support returns one if the peer supports secure * renegotiation (RFC 5746) and zero otherwise. */ OPENSSL_EXPORT int SSL_get_secure_renegotiation_support(const SSL *ssl); /* Custom extensions. * * The custom extension functions allow TLS extensions to be added to * ClientHello and ServerHello messages. */ /* SSL_custom_ext_add_cb is a callback function that is called when the * ClientHello (for clients) or ServerHello (for servers) is constructed. In * the case of a server, this callback will only be called for a given * extension if the ClientHello contained that extension – it's not possible to * inject extensions into a ServerHello that the client didn't request. * * When called, |extension_value| will contain the extension number that is * being considered for addition (so that a single callback can handle multiple * extensions). If the callback wishes to include the extension, it must set * |*out| to point to |*out_len| bytes of extension contents and return one. In * this case, the corresponding |SSL_custom_ext_free_cb| callback will later be * called with the value of |*out| once that data has been copied. * * If the callback does not wish to add an extension it must return zero. * * Alternatively, the callback can abort the connection by setting * |*out_alert_value| to a TLS alert number and returning -1. */ typedef int (*SSL_custom_ext_add_cb)(SSL *ssl, unsigned extension_value, const uint8_t **out, size_t *out_len, int *out_alert_value, void *add_arg); /* SSL_custom_ext_free_cb is a callback function that is called by OpenSSL iff * an |SSL_custom_ext_add_cb| callback previously returned one. In that case, * this callback is called and passed the |out| pointer that was returned by * the add callback. This is to free any dynamically allocated data created by * the add callback. */ typedef void (*SSL_custom_ext_free_cb)(SSL *ssl, unsigned extension_value, const uint8_t *out, void *add_arg); /* SSL_custom_ext_parse_cb is a callback function that is called by OpenSSL to * parse an extension from the peer: that is from the ServerHello for a client * and from the ClientHello for a server. * * When called, |extension_value| will contain the extension number and the * contents of the extension are |contents_len| bytes at |contents|. * * The callback must return one to continue the handshake. Otherwise, if it * returns zero, a fatal alert with value |*out_alert_value| is sent and the * handshake is aborted. */ typedef int (*SSL_custom_ext_parse_cb)(SSL *ssl, unsigned extension_value, const uint8_t *contents, size_t contents_len, int *out_alert_value, void *parse_arg); /* SSL_extension_supported returns one iff OpenSSL internally handles * extensions of type |extension_value|. This can be used to avoid registering * custom extension handlers for extensions that a future version of OpenSSL * may handle internally. */ OPENSSL_EXPORT int SSL_extension_supported(unsigned extension_value); /* SSL_CTX_add_client_custom_ext registers callback functions for handling * custom TLS extensions for client connections. * * If |add_cb| is NULL then an empty extension will be added in each * ClientHello. Otherwise, see the comment for |SSL_custom_ext_add_cb| about * this callback. * * The |free_cb| may be NULL if |add_cb| doesn't dynamically allocate data that * needs to be freed. * * It returns one on success or zero on error. It's always an error to register * callbacks for the same extension twice, or to register callbacks for an * extension that OpenSSL handles internally. See |SSL_extension_supported| to * discover, at runtime, which extensions OpenSSL handles internally. */ OPENSSL_EXPORT int SSL_CTX_add_client_custom_ext( SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb, SSL_custom_ext_free_cb free_cb, void *add_arg, SSL_custom_ext_parse_cb parse_cb, void *parse_arg); /* SSL_CTX_add_server_custom_ext is the same as * |SSL_CTX_add_client_custom_ext|, but for server connections. * * Unlike on the client side, if |add_cb| is NULL no extension will be added. * The |add_cb|, if any, will only be called if the ClientHello contained a * matching extension. */ OPENSSL_EXPORT int SSL_CTX_add_server_custom_ext( SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb, SSL_custom_ext_free_cb free_cb, void *add_arg, SSL_custom_ext_parse_cb parse_cb, void *parse_arg); /* Sessions. * * An |SSL_SESSION| represents an SSL session that may be resumed in an * abbreviated handshake. It is reference-counted and immutable. Once * established, an |SSL_SESSION| may be shared by multiple |SSL| objects on * different threads and must not be modified. */ DECLARE_LHASH_OF(SSL_SESSION) /* SSL_SESSION_new returns a newly-allocated blank |SSL_SESSION| or NULL on * error. This may be useful in writing tests but otherwise should not be * used outside the library. */ OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_new(void); /* SSL_SESSION_up_ref, if |session| is not NULL, increments the reference count * of |session|. It then returns |session|. */ OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_up_ref(SSL_SESSION *session); /* SSL_SESSION_free decrements the reference count of |session|. If it reaches * zero, all data referenced by |session| and |session| itself are released. */ OPENSSL_EXPORT void SSL_SESSION_free(SSL_SESSION *session); /* SSL_SESSION_to_bytes serializes |in| into a newly allocated buffer and sets * |*out_data| to that buffer and |*out_len| to its length. The caller takes * ownership of the buffer and must call |OPENSSL_free| when done. It returns * one on success and zero on error. */ OPENSSL_EXPORT int SSL_SESSION_to_bytes(const SSL_SESSION *in, uint8_t **out_data, size_t *out_len); /* SSL_SESSION_to_bytes_for_ticket serializes |in|, but excludes the session * identification information, namely the session ID and ticket. */ OPENSSL_EXPORT int SSL_SESSION_to_bytes_for_ticket(const SSL_SESSION *in, uint8_t **out_data, size_t *out_len); /* SSL_SESSION_from_bytes parses |in_len| bytes from |in| as an SSL_SESSION. It * returns a newly-allocated |SSL_SESSION| on success or NULL on error. */ OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_from_bytes(const uint8_t *in, size_t in_len); /* SSL_SESSION_get_version returns a string describing the TLS version |session| * was established at. For example, "TLSv1.2" or "SSLv3". */ OPENSSL_EXPORT const char *SSL_SESSION_get_version(const SSL_SESSION *session); /* SSL_SESSION_get_id returns a pointer to a buffer containg |session|'s session * ID and sets |*out_len| to its length. */ OPENSSL_EXPORT const uint8_t *SSL_SESSION_get_id(const SSL_SESSION *session, unsigned *out_len); /* SSL_SESSION_get_time returns the time at which |session| was established in * seconds since the UNIX epoch. */ OPENSSL_EXPORT long SSL_SESSION_get_time(const SSL_SESSION *session); /* SSL_SESSION_get_timeout returns the lifetime of |session| in seconds. */ OPENSSL_EXPORT long SSL_SESSION_get_timeout(const SSL_SESSION *session); /* SSL_SESSION_get_key_exchange_info returns a value that describes the * strength of the asymmetric operation that provides confidentiality to * |session|. Its interpretation depends on the operation used. See the * documentation for this value in the |SSL_SESSION| structure. */ OPENSSL_EXPORT uint32_t SSL_SESSION_get_key_exchange_info( const SSL_SESSION *session); /* SSL_SESSION_get0_peer return's the peer leaf certificate stored in * |session|. * * TODO(davidben): This should return a const X509 *. */ OPENSSL_EXPORT X509 *SSL_SESSION_get0_peer(const SSL_SESSION *session); /* SSL_SESSION_set_time sets |session|'s creation time to |time| and returns * |time|. This function may be useful in writing tests but otherwise should not * be used. */ OPENSSL_EXPORT long SSL_SESSION_set_time(SSL_SESSION *session, long time); /* SSL_SESSION_set_time sets |session|'s timeout to |timeout| and returns one. * This function may be useful in writing tests but otherwise should not be * used. */ OPENSSL_EXPORT long SSL_SESSION_set_timeout(SSL_SESSION *session, long timeout); /* SSL_SESSION_set1_id_context sets |session|'s session ID context (see * |SSL_CTX_set_session_id_context|) to |sid_ctx|. It returns one on success and * zero on error. This function may be useful in writing tests but otherwise * should not be used. */ OPENSSL_EXPORT int SSL_SESSION_set1_id_context(SSL_SESSION *session, const uint8_t *sid_ctx, unsigned sid_ctx_len); /* Session caching. * * Session caching allows clients to reconnect to a server based on saved * parameters from a previous connection. * * For a server, the library implements a built-in internal session cache as an * in-memory hash table. One may also register callbacks to implement a custom * external session cache. An external cache may be used in addition to or * instead of the internal one. Use |SSL_CTX_set_session_cache_mode| to toggle * the internal cache. * * For a client, the only option is an external session cache. Prior to * handshaking, the consumer should look up a session externally (keyed, for * instance, by hostname) and use |SSL_set_session| to configure which session * to offer. The callbacks may be used to determine when new sessions are * available. * * Note that offering or accepting a session short-circuits most parameter * negotiation. Resuming sessions across different configurations may result in * surprising behavor. So, for instance, a client implementing a version * fallback should shard its session cache by maximum protocol version. */ /* SSL_SESS_CACHE_OFF disables all session caching. */ #define SSL_SESS_CACHE_OFF 0x0000 /* SSL_SESS_CACHE_CLIENT enables session caching for a client. * * TODO(davidben): The internal cache is useless on the client. Always act as if * SSL_SESS_CACHE_NO_INTERNAL is set. https://crbug.com/531194. Also see TODO * attached to |SSL_CTX_sess_set_new_cb|. */ #define SSL_SESS_CACHE_CLIENT 0x0001 /* SSL_SESS_CACHE_SERVER enables session caching for a server. */ #define SSL_SESS_CACHE_SERVER 0x0002 /* SSL_SESS_CACHE_SERVER enables session caching for both client and server. */ #define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_SERVER) /* SSL_SESS_CACHE_NO_AUTO_CLEAR disables automatically calling * |SSL_CTX_flush_sessions| every 255 connections. */ #define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 /* SSL_SESS_CACHE_NO_INTERNAL_LOOKUP disables looking up a session from the * internal session cache. */ #define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 /* SSL_SESS_CACHE_NO_INTERNAL_STORE disables storing sessions in the internal * session cache. */ #define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 /* SSL_SESS_CACHE_NO_INTERNAL disables the internal session cache. */ #define SSL_SESS_CACHE_NO_INTERNAL \ (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP | SSL_SESS_CACHE_NO_INTERNAL_STORE) /* SSL_CTX_set_session_cache_mode sets the session cache mode bits for |ctx| to * |mode|. It returns the previous value. */ OPENSSL_EXPORT int SSL_CTX_set_session_cache_mode(SSL_CTX *ctx, int mode); /* SSL_CTX_get_session_cache_mode returns the session cache mode bits for * |ctx| */ OPENSSL_EXPORT int SSL_CTX_get_session_cache_mode(const SSL_CTX *ctx); /* SSL_set_session, for a client, configures |ssl| to offer to resume |session| * in the initial handshake. */ OPENSSL_EXPORT int SSL_set_session(SSL *ssl, SSL_SESSION *session); /* SSL_get_session returns a non-owning pointer to |ssl|'s session. Prior to the * initial handshake beginning, this is the session to be offered, set by * |SSL_set_session|. After a handshake has finished, this is the currently * active session. Its behavior is undefined while a handshake is progress. */ OPENSSL_EXPORT SSL_SESSION *SSL_get_session(const SSL *ssl); /* SSL_get0_session is an alias for |SSL_get_session|. */ #define SSL_get0_session SSL_get_session /* SSL_get1_session acts like |SSL_get_session| but returns a new reference to * the session. */ OPENSSL_EXPORT SSL_SESSION *SSL_get1_session(SSL *ssl); /* SSL_DEFAULT_SESSION_TIMEOUT is the default lifetime, in seconds, of a * session. */ #define SSL_DEFAULT_SESSION_TIMEOUT (2 * 60 * 60) /* SSL_CTX_set_timeout sets the lifetime, in seconds, of sessions created in * |ctx| to |timeout|. */ OPENSSL_EXPORT long SSL_CTX_set_timeout(SSL_CTX *ctx, long timeout); /* SSL_CTX_get_timeout returns the lifetime, in seconds, of sessions created in * |ctx|. */ OPENSSL_EXPORT long SSL_CTX_get_timeout(const SSL_CTX *ctx); /* SSL_CTX_set_session_id_context sets |ctx|'s session ID context to |sid_ctx|. * It returns one on success and zero on error. The session ID context is an * application-defined opaque byte string. A session will not be used in a * connection without a matching session ID context. * * For a server, if |SSL_VERIFY_PEER| is enabled, it is an error to not set a * session ID context. * * TODO(davidben): Is that check needed? That seems a special case of taking * care not to cross-resume across configuration changes, and this is only * relevant if a server requires client auth. */ OPENSSL_EXPORT int SSL_CTX_set_session_id_context(SSL_CTX *ctx, const uint8_t *sid_ctx, unsigned sid_ctx_len); /* SSL_set_session_id_context sets |ssl|'s session ID context to |sid_ctx|. It * returns one on success and zero on error. See also * |SSL_CTX_set_session_id_context|. */ OPENSSL_EXPORT int SSL_set_session_id_context(SSL *ssl, const uint8_t *sid_ctx, unsigned sid_ctx_len); /* SSL_SESSION_CACHE_MAX_SIZE_DEFAULT is the default maximum size of a session * cache. */ #define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024 * 20) /* SSL_CTX_sess_set_cache_size sets the maximum size of |ctx|'s internal session * cache to |size|. It returns the previous value. */ OPENSSL_EXPORT unsigned long SSL_CTX_sess_set_cache_size(SSL_CTX *ctx, unsigned long size); /* SSL_CTX_sess_get_cache_size returns the maximum size of |ctx|'s internal * session cache. */ OPENSSL_EXPORT unsigned long SSL_CTX_sess_get_cache_size(const SSL_CTX *ctx); /* SSL_CTX_sessions returns |ctx|'s internal session cache. */ OPENSSL_EXPORT LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx); /* SSL_CTX_sess_number returns the number of sessions in |ctx|'s internal * session cache. */ OPENSSL_EXPORT size_t SSL_CTX_sess_number(const SSL_CTX *ctx); /* SSL_CTX_add_session inserts |session| into |ctx|'s internal session cache. It * returns one on success and zero on error or if |ctx| already included a * session with that session ID. The caller retains its reference to * |session|. */ OPENSSL_EXPORT int SSL_CTX_add_session(SSL_CTX *ctx, SSL_SESSION *session); /* SSL_CTX_remove_session removes |session| from |ctx|'s internal session cache. * It returns one on success and zero on error or if no session with a matching * ID was found. */ OPENSSL_EXPORT int SSL_CTX_remove_session(SSL_CTX *ctx, SSL_SESSION *session); /* SSL_CTX_flush_sessions removes all sessions from |ctx| which have expired as * of time |time|. If |time| is zero, all sessions are removed. */ OPENSSL_EXPORT void SSL_CTX_flush_sessions(SSL_CTX *ctx, long time); /* SSL_CTX_sess_set_new_cb sets the callback to be called when a new session is * established and ready to be cached. If the session cache is disabled (the * appropriate one of |SSL_SESS_CACHE_CLIENT| or |SSL_SESS_CACHE_SERVER| is * unset), the callback is not called. * * The callback is passed a reference to |session|. It returns one if it takes * ownership and zero otherwise. * * Note: For a client, the callback may be called on abbreviated handshakes if a * ticket is renewed. Further, it may not be called until some time after * |SSL_do_handshake| or |SSL_connect| completes if False Start is enabled. Thus * it's recommended to use this callback over checking |SSL_session_reused| on * handshake completion. * * TODO(davidben): Conditioning callbacks on |SSL_SESS_CACHE_CLIENT| or * |SSL_SESS_CACHE_SERVER| doesn't make any sense when one could just as easily * not supply the callbacks. Removing that condition and the client internal * cache would simplify things. */ OPENSSL_EXPORT void SSL_CTX_sess_set_new_cb( SSL_CTX *ctx, int (*new_session_cb)(SSL *ssl, SSL_SESSION *session)); /* SSL_CTX_sess_get_new_cb returns the callback set by * |SSL_CTX_sess_set_new_cb|. */ OPENSSL_EXPORT int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))( SSL *ssl, SSL_SESSION *session); /* SSL_CTX_sess_set_remove_cb sets a callback which is called when a session is * removed from the internal session cache. * * TODO(davidben): What is the point of this callback? It seems useless since it * only fires on sessions in the internal cache. */ OPENSSL_EXPORT void SSL_CTX_sess_set_remove_cb( SSL_CTX *ctx, void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *session)); /* SSL_CTX_sess_get_remove_cb returns the callback set by * |SSL_CTX_sess_set_remove_cb|. */ OPENSSL_EXPORT void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))( SSL_CTX *ctx, SSL_SESSION *session); /* SSL_CTX_sess_set_get_cb sets a callback to look up a session by ID for a * server. The callback is passed the session ID and should return a matching * |SSL_SESSION| or NULL if not found. It should set |*out_copy| to zero and * return a new reference to the session. This callback is not used for a * client. * * For historical reasons, if |*out_copy| is set to one (default), the SSL * library will take a new reference to the returned |SSL_SESSION|, expecting * the callback to return a non-owning pointer. This is not recommended. If * |ctx| and thus the callback is used on multiple threads, the session may be * removed and invalidated before the SSL library calls |SSL_SESSION_up_ref|, * whereas the callback may synchronize internally. * * To look up a session asynchronously, the callback may return * |SSL_magic_pending_session_ptr|. See the documentation for that function and * |SSL_ERROR_PENDING_SESSION|. * * If the internal session cache is enabled, the callback is only consulted if * the internal cache does not return a match. */ OPENSSL_EXPORT void SSL_CTX_sess_set_get_cb( SSL_CTX *ctx, SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *id, int id_len, int *out_copy)); /* SSL_CTX_sess_get_get_cb returns the callback set by * |SSL_CTX_sess_set_get_cb|. */ OPENSSL_EXPORT SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))( SSL *ssl, uint8_t *id, int id_len, int *out_copy); /* SSL_magic_pending_session_ptr returns a magic |SSL_SESSION|* which indicates * that the session isn't currently unavailable. |SSL_get_error| will then * return |SSL_ERROR_PENDING_SESSION| and the handshake can be retried later * when the lookup has completed. */ OPENSSL_EXPORT SSL_SESSION *SSL_magic_pending_session_ptr(void); /* GEN_SESSION_CB is a callback to generate session IDs for |ssl|. It returns * one on success and zero on error. On success, the generated ID is written to * |id| and |*id_len| set to the length. On entry, |*id_len| is the maximum * length of the ID, but the callback may shorten it if desired. It is an error * for the callback to set the size to zero. * * Callbacks may use |SSL_has_matching_session_id| to check that the generated * ID is unique. */ typedef int (*GEN_SESSION_CB)(const SSL *ssl, uint8_t *id, unsigned *id_len); /* SSL_CTX_set_generate_session_id sets the session ID callback of |ctx| to * |cb| and returns one. It will be called on the server when establishing a new * session. */ OPENSSL_EXPORT int SSL_CTX_set_generate_session_id(SSL_CTX *ctx, GEN_SESSION_CB cb); /* SSL_set_generate_session_id sets the session ID callback of |ssl| to |cb| and * returns one. It will be called on the server when establishing a new * session. */ OPENSSL_EXPORT int SSL_set_generate_session_id(SSL *ssl, GEN_SESSION_CB cb); /* SSL_has_matching_session_id returns one if |ssl|'s session cache has a * session of value |id| and zero otherwise. */ OPENSSL_EXPORT int SSL_has_matching_session_id(const SSL *ssl, const uint8_t *id, unsigned id_len); /* Session tickets. * * Session tickets, from RFC 5077, allow session resumption without server-side * state. Session tickets are supported in by default but may be disabled with * |SSL_OP_NO_TICKET|. * * On the client, ticket-based sessions use the same APIs as ID-based tickets. * Callers do not need to handle them differently. * * On the server, tickets are encrypted and authenticated with a secret key. By * default, an |SSL_CTX| generates a key on creation. Tickets are minted and * processed transparently. The following functions may be used to configure a * persistent key or implement more custom behavior. */ /* SSL_CTX_get_tlsext_ticket_keys writes |ctx|'s session ticket key material to * |len| bytes of |out|. It returns one on success and zero if |len| is not * 48. If |out| is NULL, it returns 48 instead. */ OPENSSL_EXPORT int SSL_CTX_get_tlsext_ticket_keys(SSL_CTX *ctx, void *out, size_t len); /* SSL_CTX_set_tlsext_ticket_keys sets |ctx|'s session ticket key material to * |len| bytes of |in|. It returns one on success and zero if |len| is not * 48. If |in| is NULL, it returns 48 instead. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_keys(SSL_CTX *ctx, const void *in, size_t len); /* SSL_TICKET_KEY_NAME_LEN is the length of the key name prefix of a session * ticket. */ #define SSL_TICKET_KEY_NAME_LEN 16 /* SSL_CTX_set_tlsext_ticket_key_cb sets the ticket callback to |callback| and * returns one. |callback| will be called when encrypting a new ticket and when * decrypting a ticket from the client. * * In both modes, |ctx| and |hmac_ctx| will already have been initialized with * |EVP_CIPHER_CTX_init| and |HMAC_CTX_init|, respectively. |callback| * configures |hmac_ctx| with an HMAC digest and key, and configures |ctx| * for encryption or decryption, based on the mode. * * When encrypting a new ticket, |encrypt| will be one. It writes a public * 16-byte key name to |key_name| and a fresh IV to |iv|. The output IV length * must match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode, * |callback| returns 1 on success and -1 on error. * * When decrypting a ticket, |encrypt| will be zero. |key_name| will point to a * 16-byte key name and |iv| points to an IV. The length of the IV consumed must * match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode, * |callback| returns -1 to abort the handshake, 0 if decrypting the ticket * failed, and 1 or 2 on success. If it returns 2, the ticket will be renewed. * This may be used to re-key the ticket. * * WARNING: |callback| wildly breaks the usual return value convention and is * called in two different modes. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_key_cb( SSL_CTX *ctx, int (*callback)(SSL *ssl, uint8_t *key_name, uint8_t *iv, EVP_CIPHER_CTX *ctx, HMAC_CTX *hmac_ctx, int encrypt)); /* Elliptic curve Diffie-Hellman. * * Cipher suites using an ECDHE key exchange perform Diffie-Hellman over an * elliptic curve negotiated by both endpoints. See RFC 4492. Only named curves * are supported. ECDHE is always enabled, but the curve preferences may be * configured with these functions. * * A client may use |SSL_SESSION_get_key_exchange_info| to determine the curve * selected. */ /* SSL_CTX_set1_curves sets the preferred curves for |ctx| to be |curves|. Each * element of |curves| should be a curve nid. It returns one on success and * zero on failure. */ OPENSSL_EXPORT int SSL_CTX_set1_curves(SSL_CTX *ctx, const int *curves, size_t curves_len); /* SSL_set1_curves sets the preferred curves for |ssl| to be |curves|. Each * element of |curves| should be a curve nid. It returns one on success and * zero on failure. */ OPENSSL_EXPORT int SSL_set1_curves(SSL *ssl, const int *curves, size_t curves_len); /* SSL_CTX_set_tmp_ecdh configures |ctx| to use the curve from |ecdh| as the * curve for ephemeral ECDH keys. For historical reasons, this API expects an * |EC_KEY|, but only the curve is used. It returns one on success and zero on * error. If unset, an appropriate curve will be chosen based on curve * preferences. (This is recommended.) */ OPENSSL_EXPORT int SSL_CTX_set_tmp_ecdh(SSL_CTX *ctx, const EC_KEY *ec_key); /* SSL_set_tmp_ecdh configures |ssl| to use the curve from |ecdh| as the curve * for ephemeral ECDH keys. For historical reasons, this API expects an * |EC_KEY|, but only the curve is used. It returns one on success and zero on * error. If unset, an appropriate curve will be chosen based on curve * preferences. (This is recommended.) */ OPENSSL_EXPORT int SSL_set_tmp_ecdh(SSL *ssl, const EC_KEY *ec_key); /* SSL_CTX_set_tmp_ecdh_callback configures |ctx| to use |callback| to determine * the curve for ephemeral ECDH keys. |callback| should ignore |is_export| and * |keylength| and return an |EC_KEY| of the selected curve or NULL on * error. Only the curve is used, so the |EC_KEY| needn't have a generated * keypair. * * If the callback is unset, an appropriate curve will be chosen based on curve * preferences. (This is recommended.) * * WARNING: The caller does not take ownership of the resulting |EC_KEY|, so * |callback| must save and release the object elsewhere. */ OPENSSL_EXPORT void SSL_CTX_set_tmp_ecdh_callback( SSL_CTX *ctx, EC_KEY *(*callback)(SSL *ssl, int is_export, int keylength)); /* SSL_set_tmp_ecdh_callback configures |ssl| to use |callback| to determine the * curve for ephemeral ECDH keys. |callback| should ignore |is_export| and * |keylength| and return an |EC_KEY| of the selected curve or NULL on * error. Only the curve is used, so the |EC_KEY| needn't have a generated * keypair. * * If the callback is unset, an appropriate curve will be chosen based on curve * preferences. (This is recommended.) * * WARNING: The caller does not take ownership of the resulting |EC_KEY|, so * |callback| must save and release the object elsewhere. */ OPENSSL_EXPORT void SSL_set_tmp_ecdh_callback( SSL *ssl, EC_KEY *(*callback)(SSL *ssl, int is_export, int keylength)); /* SSL_get_curve_name returns a human-readable name for the elliptic curve * specified by the given TLS curve id, or NULL if the curve if unknown. */ OPENSSL_EXPORT const char *SSL_get_curve_name(uint16_t curve_id); /* Multiplicative Diffie-Hellman. * * Cipher suites using a DHE key exchange perform Diffie-Hellman over a * multiplicative group selected by the server. These ciphers are disabled for a * server unless a group is chosen with one of these functions. * * A client may use |SSL_SESSION_get_key_exchange_info| to determine the size of * the selected group's prime, but note that servers may select degenerate * groups. */ /* SSL_CTX_set_tmp_dh configures |ctx| to use the group from |dh| as the group * for DHE. Only the group is used, so |dh| needn't have a keypair. It returns * one on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set_tmp_dh(SSL_CTX *ctx, const DH *dh); /* SSL_set_tmp_dh configures |ssl| to use the group from |dh| as the group for * DHE. Only the group is used, so |dh| needn't have a keypair. It returns one * on success and zero on error. */ OPENSSL_EXPORT int SSL_set_tmp_dh(SSL *ssl, const DH *dh); /* SSL_CTX_set_tmp_dh_callback configures |ctx| to use |callback| to determine * the group for DHE ciphers. |callback| should ignore |is_export| and * |keylength| and return a |DH| of the selected group or NULL on error. Only * the parameters are used, so the |DH| needn't have a generated keypair. * * WARNING: The caller does not take ownership of the resulting |DH|, so * |callback| must save and release the object elsewhere. */ OPENSSL_EXPORT void SSL_CTX_set_tmp_dh_callback( SSL_CTX *ctx, DH *(*callback)(SSL *ssl, int is_export, int keylength)); /* SSL_set_tmp_dh_callback configures |ssl| to use |callback| to determine the * group for DHE ciphers. |callback| should ignore |is_export| and |keylength| * and return a |DH| of the selected group or NULL on error. Only the * parameters are used, so the |DH| needn't have a generated keypair. * * WARNING: The caller does not take ownership of the resulting |DH|, so * |callback| must save and release the object elsewhere. */ OPENSSL_EXPORT void SSL_set_tmp_dh_callback(SSL *ssl, DH *(*dh)(SSL *ssl, int is_export, int keylength)); /* Certificate verification. * * SSL may authenticate either endpoint with an X.509 certificate. Typically * this is used to authenticate the server to the client. These functions * configure certificate verification. * * WARNING: By default, certificate verification errors on a client are not * fatal. See |SSL_VERIFY_NONE| This may be configured with * |SSL_CTX_set_verify|. * * By default clients are anonymous but a server may request a certificate from * the client by setting |SSL_VERIFY_PEER|. * * Many of these functions use OpenSSL's legacy X.509 stack which is * underdocumented and deprecated, but the replacement isn't ready yet. For * now, consumers may use the existing stack or bypass it by performing * certificate verification externally. This may be done with * |SSL_CTX_set_cert_verify_callback| or by extracting the chain with * |SSL_get_peer_cert_chain| after the handshake. In the future, functions will * be added to use the SSL stack without depending on any part of the legacy * X.509 and ASN.1 stack. */ /* SSL_VERIFY_NONE, on a client, verifies the server certificate but does not * make errors fatal. The result may be checked with |SSL_get_verify_result|. On * a server it does not request a client certificate. This is the default. */ #define SSL_VERIFY_NONE 0x00 /* SSL_VERIFY_PEER, on a client, makes server certificate errors fatal. On a * server it requests a client certificate and makes errors fatal. However, * anonymous clients are still allowed. See * |SSL_VERIFY_FAIL_IF_NO_PEER_CERT|. */ #define SSL_VERIFY_PEER 0x01 /* SSL_VERIFY_FAIL_IF_NO_PEER_CERT configures a server to reject connections if * the client declines to send a certificate. Otherwise |SSL_VERIFY_PEER| still * allows anonymous clients. */ #define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02 /* SSL_VERIFY_PEER_IF_NO_OBC configures a server to request a client certificate * if and only if Channel ID is not negotiated. */ #define SSL_VERIFY_PEER_IF_NO_OBC 0x04 /* SSL_CTX_set_verify configures certificate verification behavior. |mode| is * one of the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is * used to customize certificate verification. See the behavior of * |X509_STORE_CTX_set_verify_cb|. * * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with * |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|. */ OPENSSL_EXPORT void SSL_CTX_set_verify( SSL_CTX *ctx, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx)); /* SSL_set_verify configures certificate verification behavior. |mode| is one of * the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is used to * customize certificate verification. See the behavior of * |X509_STORE_CTX_set_verify_cb|. * * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with * |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|. */ OPENSSL_EXPORT void SSL_set_verify(SSL *ssl, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx)); /* SSL_CTX_get_verify_mode returns |ctx|'s verify mode, set by * |SSL_CTX_set_verify|. */ OPENSSL_EXPORT int SSL_CTX_get_verify_mode(const SSL_CTX *ctx); /* SSL_get_verify_mode returns |ssl|'s verify mode, set by |SSL_CTX_set_verify| * or |SSL_set_verify|. */ OPENSSL_EXPORT int SSL_get_verify_mode(const SSL *ssl); /* SSL_CTX_get_verify_callback returns the callback set by * |SSL_CTX_set_verify|. */ OPENSSL_EXPORT int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))( int ok, X509_STORE_CTX *store_ctx); /* SSL_get_verify_callback returns the callback set by |SSL_CTX_set_verify| or * |SSL_set_verify|. */ OPENSSL_EXPORT int (*SSL_get_verify_callback(const SSL *ssl))( int ok, X509_STORE_CTX *store_ctx); /* SSL_CTX_set_verify_depth sets the maximum depth of a certificate chain * accepted in verification. This number does not include the leaf, so a depth * of 1 allows the leaf and one CA certificate. */ OPENSSL_EXPORT void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth); /* SSL_set_verify_depth sets the maximum depth of a certificate chain accepted * in verification. This number does not include the leaf, so a depth of 1 * allows the leaf and one CA certificate. */ OPENSSL_EXPORT void SSL_set_verify_depth(SSL *ssl, int depth); /* SSL_CTX_get_verify_depth returns the maximum depth of a certificate accepted * in verification. */ OPENSSL_EXPORT int SSL_CTX_get_verify_depth(const SSL_CTX *ctx); /* SSL_get_verify_depth returns the maximum depth of a certificate accepted in * verification. */ OPENSSL_EXPORT int SSL_get_verify_depth(const SSL *ssl); /* SSL_CTX_set1_param sets verification parameters from |param|. It returns one * on success and zero on failure. The caller retains ownership of |param|. */ OPENSSL_EXPORT int SSL_CTX_set1_param(SSL_CTX *ctx, const X509_VERIFY_PARAM *param); /* SSL_set1_param sets verification parameters from |param|. It returns one on * success and zero on failure. The caller retains ownership of |param|. */ OPENSSL_EXPORT int SSL_set1_param(SSL *ssl, const X509_VERIFY_PARAM *param); /* SSL_CTX_get0_param returns |ctx|'s |X509_VERIFY_PARAM| for certificate * verification. The caller must not release the returned pointer but may call * functions on it to configure it. */ OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_CTX_get0_param(SSL_CTX *ctx); /* SSL_get0_param returns |ssl|'s |X509_VERIFY_PARAM| for certificate * verification. The caller must not release the returned pointer but may call * functions on it to configure it. */ OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_get0_param(SSL *ssl); /* SSL_CTX_set_purpose sets |ctx|'s |X509_VERIFY_PARAM|'s 'purpose' parameter to * |purpose|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set_purpose(SSL_CTX *ctx, int purpose); /* SSL_set_purpose sets |ssl|'s |X509_VERIFY_PARAM|'s 'purpose' parameter to * |purpose|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_set_purpose(SSL *ssl, int purpose); /* SSL_CTX_set_trust sets |ctx|'s |X509_VERIFY_PARAM|'s 'trust' parameter to * |trust|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set_trust(SSL_CTX *ctx, int trust); /* SSL_set_trust sets |ssl|'s |X509_VERIFY_PARAM|'s 'trust' parameter to * |trust|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_set_trust(SSL *ssl, int trust); /* SSL_CTX_set_cert_store sets |ctx|'s certificate store to |store|. It takes * ownership of |store|. The store is used for certificate verification. * * The store is also used for the auto-chaining feature, but this is deprecated. * See also |SSL_MODE_NO_AUTO_CHAIN|. */ OPENSSL_EXPORT void SSL_CTX_set_cert_store(SSL_CTX *ctx, X509_STORE *store); /* SSL_CTX_get_cert_store returns |ctx|'s certificate store. */ OPENSSL_EXPORT X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *ctx); /* SSL_CTX_set_default_verify_paths loads the OpenSSL system-default trust * anchors into |ctx|'s store. It returns one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx); /* SSL_CTX_load_verify_locations loads trust anchors into |ctx|'s store from * |ca_file| and |ca_dir|, either of which may be NULL. If |ca_file| is passed, * it is opened and PEM-encoded CA certificates are read. If |ca_dir| is passed, * it is treated as a directory in OpenSSL's hashed directory format. It returns * one on success and zero on failure. * * See * https://www.openssl.org/docs/manmaster/ssl/SSL_CTX_load_verify_locations.html * for documentation on the directory format. */ OPENSSL_EXPORT int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *ca_file, const char *ca_dir); /* SSL_get_verify_result returns the result of certificate verification. It is * either |X509_V_OK| or a |X509_V_ERR_*| value. */ OPENSSL_EXPORT long SSL_get_verify_result(const SSL *ssl); /* SSL_set_verify_result overrides the result of certificate verification. */ OPENSSL_EXPORT void SSL_set_verify_result(SSL *ssl, long result); /* SSL_get_ex_data_X509_STORE_CTX_idx returns the ex_data index used to look up * the |SSL| associated with an |X509_STORE_CTX| in the verify callback. */ OPENSSL_EXPORT int SSL_get_ex_data_X509_STORE_CTX_idx(void); /* SSL_CTX_set_cert_verify_callback sets a custom callback to be called on * certificate verification rather than |X509_verify_cert|. |store_ctx| contains * the verification parameters. The callback should return one on success and * zero on fatal error. It may use |X509_STORE_CTX_set_error| to set a * verification result. * * The callback may use either the |arg| parameter or * |SSL_get_ex_data_X509_STORE_CTX_idx| to recover the associated |SSL| * object. */ OPENSSL_EXPORT void SSL_CTX_set_cert_verify_callback( SSL_CTX *ctx, int (*callback)(X509_STORE_CTX *store_ctx, void *arg), void *arg); /* Client certificate CA list. * * When requesting a client certificate, a server may advertise a list of * certificate authorities which are accepted. These functions may be used to * configure this list. */ /* SSL_set_client_CA_list sets |ssl|'s client certificate CA list to * |name_list|. It takes ownership of |name_list|. */ OPENSSL_EXPORT void SSL_set_client_CA_list(SSL *ssl, STACK_OF(X509_NAME) *name_list); /* SSL_CTX_set_client_CA_list sets |ctx|'s client certificate CA list to * |name_list|. It takes ownership of |name_list|. */ OPENSSL_EXPORT void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); /* SSL_get_client_CA_list returns |ssl|'s client certificate CA list. */ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *ssl); /* SSL_CTX_get_client_CA_list returns |ctx|'s client certificate CA list. */ OPENSSL_EXPORT STACK_OF(X509_NAME) * SSL_CTX_get_client_CA_list(const SSL_CTX *ctx); /* SSL_add_client_CA appends |x509|'s subject to the client certificate CA list. * It returns one on success or zero on error. The caller retains ownership of * |x509|. */ OPENSSL_EXPORT int SSL_add_client_CA(SSL *ssl, X509 *x509); /* SSL_CTX_add_client_CA appends |x509|'s subject to the client certificate CA * list. It returns one on success or zero on error. The caller retains * ownership of |x509|. */ OPENSSL_EXPORT int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *x509); /* SSL_load_client_CA_file opens |file| and reads PEM-encoded certificates from * it. It returns a newly-allocated stack of the certificate subjects or NULL * on error. */ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); /* SSL_dup_CA_list makes a deep copy of |list|. It returns the new list on * success or NULL on allocation error. */ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *list); /* SSL_add_file_cert_subjects_to_stack behaves like |SSL_load_client_CA_file| * but appends the result to |out|. It returns one on success or zero on * error. */ OPENSSL_EXPORT int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *out, const char *file); /* SSL_add_dir_cert_subjects_to_stack lists files in directory |dir|. It calls * |SSL_add_file_cert_subjects_to_stack| on each file and returns one on success * or zero on error. */ OPENSSL_EXPORT int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *out, const char *dir); /* Application-layer protocol negotation. * * The ALPN extension (RFC 7301) allows negotiating different application-layer * protocols over a single port. This is used, for example, to negotiate * HTTP/2. */ /* SSL_CTX_set_alpn_protos sets the client ALPN protocol list on |ctx| to * |protos|. |protos| must be in wire-format (i.e. a series of non-empty, 8-bit * length-prefixed strings). It returns zero on success and one on failure. * Configuring this list enables ALPN on a client. * * WARNING: this function is dangerous because it breaks the usual return value * convention. */ OPENSSL_EXPORT int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos, unsigned protos_len); /* SSL_set_alpn_protos sets the client ALPN protocol list on |ssl| to |protos|. * |protos| must be in wire-format (i.e. a series of non-empty, 8-bit * length-prefixed strings). It returns zero on success and one on failure. * Configuring this list enables ALPN on a client. * * WARNING: this function is dangerous because it breaks the usual return value * convention. */ OPENSSL_EXPORT int SSL_set_alpn_protos(SSL *ssl, const uint8_t *protos, unsigned protos_len); /* SSL_CTX_set_alpn_select_cb sets a callback function on |ctx| that is called * during ClientHello processing in order to select an ALPN protocol from the * client's list of offered protocols. Configuring this callback enables ALPN on * a server. * * The callback is passed a wire-format (i.e. a series of non-empty, 8-bit * length-prefixed strings) ALPN protocol list in |in|. It should set |*out| and * |*out_len| to the selected protocol and return |SSL_TLSEXT_ERR_OK| on * success. It does not pass ownership of the buffer. Otherwise, it should * return |SSL_TLSEXT_ERR_NOACK|. Other |SSL_TLSEXT_ERR_*| values are * unimplemented and will be treated as |SSL_TLSEXT_ERR_NOACK|. */ OPENSSL_EXPORT void SSL_CTX_set_alpn_select_cb( SSL_CTX *ctx, int (*cb)(SSL *ssl, const uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg), void *arg); /* SSL_get0_alpn_selected gets the selected ALPN protocol (if any) from |ssl|. * On return it sets |*out_data| to point to |*out_len| bytes of protocol name * (not including the leading length-prefix byte). If the server didn't respond * with a negotiated protocol then |*out_len| will be zero. */ OPENSSL_EXPORT void SSL_get0_alpn_selected(const SSL *ssl, const uint8_t **out_data, unsigned *out_len); /* Next protocol negotiation. * * The NPN extension (draft-agl-tls-nextprotoneg-03) is the predecessor to ALPN * and deprecated in favor of it. */ /* SSL_CTX_set_next_protos_advertised_cb sets a callback that is called when a * TLS server needs a list of supported protocols for Next Protocol * Negotiation. The returned list must be in wire format. The list is returned * by setting |*out| to point to it and |*out_len| to its length. This memory * will not be modified, but one should assume that |ssl| keeps a reference to * it. * * The callback should return |SSL_TLSEXT_ERR_OK| if it wishes to advertise. * Otherwise, no such extension will be included in the ServerHello. */ OPENSSL_EXPORT void SSL_CTX_set_next_protos_advertised_cb( SSL_CTX *ctx, int (*cb)(SSL *ssl, const uint8_t **out, unsigned *out_len, void *arg), void *arg); /* SSL_CTX_set_next_proto_select_cb sets a callback that is called when a client * needs to select a protocol from the server's provided list. |*out| must be * set to point to the selected protocol (which may be within |in|). The length * of the protocol name must be written into |*out_len|. The server's advertised * protocols are provided in |in| and |in_len|. The callback can assume that * |in| is syntactically valid. * * The client must select a protocol. It is fatal to the connection if this * callback returns a value other than |SSL_TLSEXT_ERR_OK|. * * Configuring this callback enables NPN on a client. */ OPENSSL_EXPORT void SSL_CTX_set_next_proto_select_cb( SSL_CTX *ctx, int (*cb)(SSL *ssl, uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg), void *arg); /* SSL_get0_next_proto_negotiated sets |*out_data| and |*out_len| to point to * the client's requested protocol for this connection. If the client didn't * request any protocol, then |*out_data| is set to NULL. * * Note that the client can request any protocol it chooses. The value returned * from this function need not be a member of the list of supported protocols * provided by the server. */ OPENSSL_EXPORT void SSL_get0_next_proto_negotiated(const SSL *ssl, const uint8_t **out_data, unsigned *out_len); /* SSL_select_next_proto implements the standard protocol selection. It is * expected that this function is called from the callback set by * |SSL_CTX_set_next_proto_select_cb|. * * The protocol data is assumed to be a vector of 8-bit, length prefixed byte * strings. The length byte itself is not included in the length. A byte * string of length 0 is invalid. No byte string may be truncated. * * The current, but experimental algorithm for selecting the protocol is: * * 1) If the server doesn't support NPN then this is indicated to the * callback. In this case, the client application has to abort the connection * or have a default application level protocol. * * 2) If the server supports NPN, but advertises an empty list then the * client selects the first protcol in its list, but indicates via the * API that this fallback case was enacted. * * 3) Otherwise, the client finds the first protocol in the server's list * that it supports and selects this protocol. This is because it's * assumed that the server has better information about which protocol * a client should use. * * 4) If the client doesn't support any of the server's advertised * protocols, then this is treated the same as case 2. * * It returns either |OPENSSL_NPN_NEGOTIATED| if a common protocol was found, or * |OPENSSL_NPN_NO_OVERLAP| if the fallback case was reached. */ OPENSSL_EXPORT int SSL_select_next_proto(uint8_t **out, uint8_t *out_len, const uint8_t *server, unsigned server_len, const uint8_t *client, unsigned client_len); #define OPENSSL_NPN_UNSUPPORTED 0 #define OPENSSL_NPN_NEGOTIATED 1 #define OPENSSL_NPN_NO_OVERLAP 2 /* Channel ID. * * See draft-balfanz-tls-channelid-01. */ /* SSL_CTX_enable_tls_channel_id either configures a TLS server to accept TLS * Channel IDs from clients, or configures a client to send TLS Channel IDs to * a server. It returns one. */ OPENSSL_EXPORT int SSL_CTX_enable_tls_channel_id(SSL_CTX *ctx); /* SSL_enable_tls_channel_id either configures a TLS server to accept TLS * Channel IDs from clients, or configures a client to send TLS Channel IDs to * server. It returns one. */ OPENSSL_EXPORT int SSL_enable_tls_channel_id(SSL *ssl); /* SSL_CTX_set1_tls_channel_id configures a TLS client to send a TLS Channel ID * to compatible servers. |private_key| must be a P-256 EC key. It returns one * on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set1_tls_channel_id(SSL_CTX *ctx, EVP_PKEY *private_key); /* SSL_set1_tls_channel_id configures a TLS client to send a TLS Channel ID to * compatible servers. |private_key| must be a P-256 EC key. It returns one on * success and zero on error. */ OPENSSL_EXPORT int SSL_set1_tls_channel_id(SSL *ssl, EVP_PKEY *private_key); /* SSL_get_tls_channel_id gets the client's TLS Channel ID from a server |SSL*| * and copies up to the first |max_out| bytes into |out|. The Channel ID * consists of the client's P-256 public key as an (x,y) pair where each is a * 32-byte, big-endian field element. It returns 0 if the client didn't offer a * Channel ID and the length of the complete Channel ID otherwise. */ OPENSSL_EXPORT size_t SSL_get_tls_channel_id(SSL *ssl, uint8_t *out, size_t max_out); /* SSL_CTX_set_channel_id_cb sets a callback to be called when a TLS Channel ID * is requested. The callback may set |*out_pkey| to a key, passing a reference * to the caller. If none is returned, the handshake will pause and * |SSL_get_error| will return |SSL_ERROR_WANT_CHANNEL_ID_LOOKUP|. * * See also |SSL_ERROR_WANT_CHANNEL_ID_LOOKUP|. */ OPENSSL_EXPORT void SSL_CTX_set_channel_id_cb( SSL_CTX *ctx, void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey)); /* SSL_CTX_get_channel_id_cb returns the callback set by * |SSL_CTX_set_channel_id_cb|. */ OPENSSL_EXPORT void (*SSL_CTX_get_channel_id_cb(SSL_CTX *ctx))( SSL *ssl, EVP_PKEY **out_pkey); /* DTLS-SRTP. * * See RFC 5764. */ /* An SRTP_PROTECTION_PROFILE is an SRTP profile for use with the use_srtp * extension. */ struct srtp_protection_profile_st { const char *name; unsigned long id; } /* SRTP_PROTECTION_PROFILE */; DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE) /* SRTP_* define constants for SRTP profiles. */ #define SRTP_AES128_CM_SHA1_80 0x0001 #define SRTP_AES128_CM_SHA1_32 0x0002 #define SRTP_AES128_F8_SHA1_80 0x0003 #define SRTP_AES128_F8_SHA1_32 0x0004 #define SRTP_NULL_SHA1_80 0x0005 #define SRTP_NULL_SHA1_32 0x0006 /* SSL_CTX_set_srtp_profiles enables SRTP for all SSL objects created from * |ctx|. |profile| contains a colon-separated list of profile names. It returns * one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_set_srtp_profiles(SSL_CTX *ctx, const char *profiles); /* SSL_set_srtp_profiles enables SRTP for |ssl|. |profile| contains a * colon-separated list of profile names. It returns one on success and zero on * failure. */ OPENSSL_EXPORT int SSL_set_srtp_profiles(SSL *ssl, const char *profiles); /* SSL_get_srtp_profiles returns the SRTP profiles supported by |ssl|. */ OPENSSL_EXPORT STACK_OF(SRTP_PROTECTION_PROFILE) *SSL_get_srtp_profiles( SSL *ssl); /* SSL_get_selected_srtp_profile returns the selected SRTP profile, or NULL if * SRTP was not negotiated. */ OPENSSL_EXPORT const SRTP_PROTECTION_PROFILE *SSL_get_selected_srtp_profile( SSL *ssl); /* Pre-shared keys. * * Connections may be configured with PSK (Pre-Shared Key) cipher suites. These * authenticate using out-of-band pre-shared keys rather than certificates. See * RFC 4279. * * This implementation uses NUL-terminated C strings for identities and identity * hints, so values with a NUL character are not supported. (RFC 4279 does not * specify the format of an identity.) */ /* PSK_MAX_IDENTITY_LEN is the maximum supported length of a PSK identity, * excluding the NUL terminator. */ #define PSK_MAX_IDENTITY_LEN 128 /* PSK_MAX_PSK_LEN is the maximum supported length of a pre-shared key. */ #define PSK_MAX_PSK_LEN 256 /* SSL_CTX_set_psk_client_callback sets the callback to be called when PSK is * negotiated on the client. This callback must be set to enable PSK cipher * suites on the client. * * The callback is passed the identity hint in |hint| or NULL if none was * provided. It should select a PSK identity and write the identity and the * corresponding PSK to |identity| and |psk|, respectively. The identity is * written as a NUL-terminated C string of length (excluding the NUL terminator) * at most |max_identity_len|. The PSK's length must be at most |max_psk_len|. * The callback returns the length of the PSK or 0 if no suitable identity was * found. */ OPENSSL_EXPORT void SSL_CTX_set_psk_client_callback( SSL_CTX *ctx, unsigned (*psk_client_callback)( SSL *ssl, const char *hint, char *identity, unsigned max_identity_len, uint8_t *psk, unsigned max_psk_len)); /* SSL_set_psk_client_callback sets the callback to be called when PSK is * negotiated on the client. This callback must be set to enable PSK cipher * suites on the client. See also |SSL_CTX_set_psk_client_callback|. */ OPENSSL_EXPORT void SSL_set_psk_client_callback( SSL *ssl, unsigned (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, unsigned max_identity_len, uint8_t *psk, unsigned max_psk_len)); /* SSL_CTX_set_psk_server_callback sets the callback to be called when PSK is * negotiated on the server. This callback must be set to enable PSK cipher * suites on the server. * * The callback is passed the identity in |identity|. It should write a PSK of * length at most |max_psk_len| to |psk| and return the number of bytes written * or zero if the PSK identity is unknown. */ OPENSSL_EXPORT void SSL_CTX_set_psk_server_callback( SSL_CTX *ctx, unsigned (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned max_psk_len)); /* SSL_set_psk_server_callback sets the callback to be called when PSK is * negotiated on the server. This callback must be set to enable PSK cipher * suites on the server. See also |SSL_CTX_set_psk_server_callback|. */ OPENSSL_EXPORT void SSL_set_psk_server_callback( SSL *ssl, unsigned (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned max_psk_len)); /* SSL_CTX_use_psk_identity_hint configures server connections to advertise an * identity hint of |identity_hint|. It returns one on success and zero on * error. */ OPENSSL_EXPORT int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint); /* SSL_use_psk_identity_hint configures server connections to advertise an * identity hint of |identity_hint|. It returns one on success and zero on * error. */ OPENSSL_EXPORT int SSL_use_psk_identity_hint(SSL *ssl, const char *identity_hint); /* SSL_get_psk_identity_hint returns the PSK identity hint advertised for |ssl| * or NULL if there is none. */ OPENSSL_EXPORT const char *SSL_get_psk_identity_hint(const SSL *ssl); /* SSL_get_psk_identity, after the handshake completes, returns the PSK identity * that was negotiated by |ssl| or NULL if PSK was not used. */ OPENSSL_EXPORT const char *SSL_get_psk_identity(const SSL *ssl); /* ex_data functions. * * See |ex_data.h| for details. */ OPENSSL_EXPORT int SSL_set_ex_data(SSL *ssl, int idx, void *data); OPENSSL_EXPORT void *SSL_get_ex_data(const SSL *ssl, int idx); OPENSSL_EXPORT int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); OPENSSL_EXPORT int SSL_SESSION_set_ex_data(SSL_SESSION *session, int idx, void *data); OPENSSL_EXPORT void *SSL_SESSION_get_ex_data(const SSL_SESSION *session, int idx); OPENSSL_EXPORT int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); OPENSSL_EXPORT int SSL_CTX_set_ex_data(SSL_CTX *ctx, int idx, void *data); OPENSSL_EXPORT void *SSL_CTX_get_ex_data(const SSL_CTX *ctx, int idx); OPENSSL_EXPORT int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); /* Obscure functions. */ /* SSL_get_rc4_state sets |*read_key| and |*write_key| to the RC4 states for * the read and write directions. It returns one on success or zero if |ssl| * isn't using an RC4-based cipher suite. */ OPENSSL_EXPORT int SSL_get_rc4_state(const SSL *ssl, const RC4_KEY **read_key, const RC4_KEY **write_key); /* SSL_get_structure_sizes returns the sizes of the SSL, SSL_CTX and * SSL_SESSION structures so that a test can ensure that outside code agrees on * these values. */ OPENSSL_EXPORT void SSL_get_structure_sizes(size_t *ssl_size, size_t *ssl_ctx_size, size_t *ssl_session_size); /* Underdocumented functions. * * Functions below here haven't been touched up and may be underdocumented. */ /* SSLeay version number for ASN.1 encoding of the session information */ /* Version 0 - initial version * Version 1 - added the optional peer certificate. */ #define SSL_SESSION_ASN1_VERSION 0x0001 #define SSL_MAX_SSL_SESSION_ID_LENGTH 32 #define SSL_MAX_SID_CTX_LENGTH 32 #define SSL_MAX_MASTER_KEY_LENGTH 48 /* These are used to specify which ciphers to use and not to use */ #define SSL_TXT_MEDIUM "MEDIUM" #define SSL_TXT_HIGH "HIGH" #define SSL_TXT_FIPS "FIPS" #define SSL_TXT_kRSA "kRSA" #define SSL_TXT_kDHE "kDHE" #define SSL_TXT_kEDH "kEDH" /* same as "kDHE" */ #define SSL_TXT_kECDHE "kECDHE" #define SSL_TXT_kEECDH "kEECDH" /* same as "kECDHE" */ #define SSL_TXT_kPSK "kPSK" #define SSL_TXT_aRSA "aRSA" #define SSL_TXT_aECDSA "aECDSA" #define SSL_TXT_aPSK "aPSK" #define SSL_TXT_DH "DH" #define SSL_TXT_DHE "DHE" /* same as "kDHE" */ #define SSL_TXT_EDH "EDH" /* same as "DHE" */ #define SSL_TXT_RSA "RSA" #define SSL_TXT_ECDH "ECDH" #define SSL_TXT_ECDHE "ECDHE" /* same as "kECDHE" */ #define SSL_TXT_EECDH "EECDH" /* same as "ECDHE" */ #define SSL_TXT_ECDSA "ECDSA" #define SSL_TXT_PSK "PSK" #define SSL_TXT_3DES "3DES" #define SSL_TXT_RC4 "RC4" #define SSL_TXT_AES128 "AES128" #define SSL_TXT_AES256 "AES256" #define SSL_TXT_AES "AES" #define SSL_TXT_AES_GCM "AESGCM" #define SSL_TXT_CHACHA20 "CHACHA20" #define SSL_TXT_MD5 "MD5" #define SSL_TXT_SHA1 "SHA1" #define SSL_TXT_SHA "SHA" /* same as "SHA1" */ #define SSL_TXT_SHA256 "SHA256" #define SSL_TXT_SHA384 "SHA384" #define SSL_TXT_SSLV3 "SSLv3" #define SSL_TXT_TLSV1 "TLSv1" #define SSL_TXT_TLSV1_1 "TLSv1.1" #define SSL_TXT_TLSV1_2 "TLSv1.2" #define SSL_TXT_ALL "ALL" /* COMPLEMENTOF* definitions. These identifiers are used to (de-select) ciphers * normally not being used. * * Example: "RC4" will activate all ciphers using RC4 including ciphers without * authentication, which would normally disabled by DEFAULT (due the "!ADH" * being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" will make sure * that it is also disabled in the specific selection. COMPLEMENTOF* * identifiers are portable between version, as adjustments to the default * cipher setup will also be included here. * * COMPLEMENTOFDEFAULT does not experience the same special treatment that * DEFAULT gets, as only selection is being done and no sorting as needed for * DEFAULT. */ #define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" /* The following cipher list is used by default. It also is substituted when an * application-defined cipher list string starts with 'DEFAULT'. */ #define SSL_DEFAULT_CIPHER_LIST "ALL" /* As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always * starts with a reasonable order, and all we have to do for DEFAULT is * throwing out anonymous and unencrypted ciphersuites! (The latter are not * actually enabled by ALL, but "ALL:RSA" would enable some of them.) */ /* Used in SSL_set_shutdown()/SSL_get_shutdown(); */ #define SSL_SENT_SHUTDOWN 1 #define SSL_RECEIVED_SHUTDOWN 2 typedef struct ssl_protocol_method_st SSL_PROTOCOL_METHOD; typedef struct ssl_conf_ctx_st SSL_CONF_CTX; typedef struct ssl3_enc_method SSL3_ENC_METHOD; /* SSL_set_mtu sets the |ssl|'s MTU in DTLS to |mtu|. It returns one on success * and zero on failure. */ OPENSSL_EXPORT int SSL_set_mtu(SSL *ssl, unsigned mtu); /* SSL_CTX_set_msg_callback installs |cb| as the message callback for |ctx|. * This callback will be called when sending or receiving low-level record * headers, complete handshake messages, ChangeCipherSpec, and alerts. * |write_p| is one for outgoing messages and zero for incoming messages. * * For each record header, |cb| is called with |version| = 0 and |content_type| * = |SSL3_RT_HEADER|. The |len| bytes from |buf| contain the header. Note that * this does not include the record body. If the record is sealed, the length * in the header is the length of the ciphertext. * * For each handshake message, ChangeCipherSpec, and alert, |version| is the * protocol version and |content_type| is the corresponding record type. The * |len| bytes from |buf| contain the handshake message, one-byte * ChangeCipherSpec body, and two-byte alert, respectively. */ OPENSSL_EXPORT void SSL_CTX_set_msg_callback( SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); /* SSL_CTX_set_msg_callback_arg sets the |arg| parameter of the message * callback. */ OPENSSL_EXPORT void SSL_CTX_set_msg_callback_arg(SSL_CTX *ctx, void *arg); /* SSL_set_msg_callback installs |cb| as the message callback of |ssl|. See * |SSL_CTX_set_msg_callback| for when this callback is called. */ OPENSSL_EXPORT void SSL_set_msg_callback( SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); /* SSL_set_msg_callback_arg sets the |arg| parameter of the message callback. */ OPENSSL_EXPORT void SSL_set_msg_callback_arg(SSL *ssl, void *arg); /* SSL_CTX_set_keylog_bio sets configures all SSL objects attached to |ctx| to * log session material to |keylog_bio|. This is intended for debugging use * with tools like Wireshark. |ctx| takes ownership of |keylog_bio|. * * The format is described in * https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format. */ OPENSSL_EXPORT void SSL_CTX_set_keylog_bio(SSL_CTX *ctx, BIO *keylog_bio); struct ssl_aead_ctx_st; typedef struct ssl_aead_ctx_st SSL_AEAD_CTX; #define SSL_MAX_CERT_LIST_DEFAULT 1024 * 100 /* 100k max cert list */ /* ssl_early_callback_ctx is passed to certain callbacks that are called very * early on during the server handshake. At this point, much of the SSL* hasn't * been filled out and only the ClientHello can be depended on. */ struct ssl_early_callback_ctx { SSL *ssl; const uint8_t *client_hello; size_t client_hello_len; const uint8_t *session_id; size_t session_id_len; const uint8_t *cipher_suites; size_t cipher_suites_len; const uint8_t *compression_methods; size_t compression_methods_len; const uint8_t *extensions; size_t extensions_len; }; /* SSL_early_callback_ctx_extension_get searches the extensions in |ctx| for an * extension of the given type. If not found, it returns zero. Otherwise it * sets |out_data| to point to the extension contents (not including the type * and length bytes), sets |out_len| to the length of the extension contents * and returns one. */ OPENSSL_EXPORT char SSL_early_callback_ctx_extension_get( const struct ssl_early_callback_ctx *ctx, uint16_t extension_type, const uint8_t **out_data, size_t *out_len); OPENSSL_EXPORT void SSL_CTX_set_info_callback(SSL_CTX *ctx, void (*cb)(const SSL *ssl, int type, int val)); OPENSSL_EXPORT void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl, int type, int val); OPENSSL_EXPORT void SSL_CTX_set_client_cert_cb( SSL_CTX *ctx, int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey)); OPENSSL_EXPORT int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx))(SSL *ssl, X509 **x509, EVP_PKEY **pkey); /* SSL_enable_signed_cert_timestamps causes |ssl| (which must be the client end * of a connection) to request SCTs from the server. See * https://tools.ietf.org/html/rfc6962. It returns one. */ OPENSSL_EXPORT int SSL_enable_signed_cert_timestamps(SSL *ssl); /* SSL_CTX_enable_signed_cert_timestamps enables SCT requests on all client SSL * objects created from |ctx|. */ OPENSSL_EXPORT void SSL_CTX_enable_signed_cert_timestamps(SSL_CTX *ctx); /* SSL_enable_ocsp_stapling causes |ssl| (which must be the client end of a * connection) to request a stapled OCSP response from the server. It returns * one. */ OPENSSL_EXPORT int SSL_enable_ocsp_stapling(SSL *ssl); /* SSL_CTX_enable_ocsp_stapling enables OCSP stapling on all client SSL objects * created from |ctx|. */ OPENSSL_EXPORT void SSL_CTX_enable_ocsp_stapling(SSL_CTX *ctx); /* SSL_get0_signed_cert_timestamp_list sets |*out| and |*out_len| to point to * |*out_len| bytes of SCT information from the server. This is only valid if * |ssl| is a client. The SCT information is a SignedCertificateTimestampList * (including the two leading length bytes). * See https://tools.ietf.org/html/rfc6962#section-3.3 * If no SCT was received then |*out_len| will be zero on return. * * WARNING: the returned data is not guaranteed to be well formed. */ OPENSSL_EXPORT void SSL_get0_signed_cert_timestamp_list(const SSL *ssl, const uint8_t **out, size_t *out_len); /* SSL_get0_ocsp_response sets |*out| and |*out_len| to point to |*out_len| * bytes of an OCSP response from the server. This is the DER encoding of an * OCSPResponse type as defined in RFC 2560. * * WARNING: the returned data is not guaranteed to be well formed. */ OPENSSL_EXPORT void SSL_get0_ocsp_response(const SSL *ssl, const uint8_t **out, size_t *out_len); /* SSL_set_reject_peer_renegotiations controls whether renegotiation attempts by * the peer are rejected. It may be set at any point in a connection's lifetime * to control future renegotiations programmatically. By default, renegotiations * are rejected. (Renegotiations requested by a client are always rejected.) */ OPENSSL_EXPORT void SSL_set_reject_peer_renegotiations(SSL *ssl, int reject); #define SSL_NOTHING 1 #define SSL_WRITING 2 #define SSL_READING 3 #define SSL_X509_LOOKUP 4 #define SSL_CHANNEL_ID_LOOKUP 5 #define SSL_PENDING_SESSION 7 #define SSL_CERTIFICATE_SELECTION_PENDING 8 #define SSL_PRIVATE_KEY_OPERATION 9 /* These will only be used when doing non-blocking IO */ #define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING) #define SSL_want_read(s) (SSL_want(s) == SSL_READING) #define SSL_want_write(s) (SSL_want(s) == SSL_WRITING) #define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP) #define SSL_want_channel_id_lookup(s) (SSL_want(s) == SSL_CHANNEL_ID_LOOKUP) #define SSL_want_session(s) (SSL_want(s) == SSL_PENDING_SESSION) #define SSL_want_certificate(s) \ (SSL_want(s) == SSL_CERTIFICATE_SELECTION_PENDING) #define SSL_want_private_key_operation(s) \ (SSL_want(s) == SSL_PRIVATE_KEY_OPERATION) /* The following are the possible values for ssl->state are are used to * indicate where we are up to in the SSL connection establishment. The macros * that follow are about the only things you should need to use and even then, * only when using non-blocking IO. It can also be useful to work out where you * were when the connection failed */ #define SSL_ST_CONNECT 0x1000 #define SSL_ST_ACCEPT 0x2000 #define SSL_ST_MASK 0x0FFF #define SSL_ST_INIT (SSL_ST_CONNECT | SSL_ST_ACCEPT) #define SSL_ST_OK 0x03 #define SSL_ST_RENEGOTIATE (0x04 | SSL_ST_INIT) #define SSL_CB_LOOP 0x01 #define SSL_CB_EXIT 0x02 #define SSL_CB_READ 0x04 #define SSL_CB_WRITE 0x08 #define SSL_CB_ALERT 0x4000 /* used in callback */ #define SSL_CB_READ_ALERT (SSL_CB_ALERT | SSL_CB_READ) #define SSL_CB_WRITE_ALERT (SSL_CB_ALERT | SSL_CB_WRITE) #define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT | SSL_CB_LOOP) #define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT | SSL_CB_EXIT) #define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT | SSL_CB_LOOP) #define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT | SSL_CB_EXIT) #define SSL_CB_HANDSHAKE_START 0x10 #define SSL_CB_HANDSHAKE_DONE 0x20 /* Is the SSL_connection established? */ #define SSL_get_state(a) SSL_state(a) #define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK) #define SSL_in_init(a) (SSL_state(a) & SSL_ST_INIT) #define SSL_in_connect_init(a) (SSL_state(a) & SSL_ST_CONNECT) #define SSL_in_accept_init(a) (SSL_state(a) & SSL_ST_ACCEPT) /* SSL_in_false_start returns one if |s| has a pending unfinished handshake that * is in False Start. |SSL_write| may be called at this point without waiting * for the peer, but |SSL_read| will require the handshake to be completed. */ OPENSSL_EXPORT int SSL_in_false_start(const SSL *s); /* Obtain latest Finished message * -- that we sent (SSL_get_finished) * -- that we expected from peer (SSL_get_peer_finished). * Returns length (0 == no Finished so far), copies up to 'count' bytes. */ OPENSSL_EXPORT size_t SSL_get_finished(const SSL *s, void *buf, size_t count); OPENSSL_EXPORT size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count); #define d2i_SSL_SESSION_bio(bp, s_id) \ ASN1_d2i_bio_of(SSL_SESSION, SSL_SESSION_new, d2i_SSL_SESSION, bp, s_id) #define i2d_SSL_SESSION_bio(bp, s_id) \ ASN1_i2d_bio_of(SSL_SESSION, i2d_SSL_SESSION, bp, s_id) DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION) /* make_errors.go reserves error codes above 1000 for manually-assigned errors. * This value must be kept in sync with reservedReasonCode in make_errors.h */ #define SSL_AD_REASON_OFFSET \ 1000 /* offset to get SSL_R_... value from SSL_AD_... */ /* These alert types are for SSLv3 and TLSv1 */ #define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY #define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */ #define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC /* fatal */ #define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED #define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW #define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE /* fatal */ #define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE /* fatal */ #define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not for TLS */ #define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE #define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE #define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED #define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED #define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN #define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */ #define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */ #define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */ #define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR /* fatal */ #define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR #define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION /* fatal */ #define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */ #define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY /* fatal */ #define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR /* fatal */ #define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED #define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION #define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION #define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE #define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME #define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE \ TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE #define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE #define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY /* fatal */ #define SSL_AD_INAPPROPRIATE_FALLBACK SSL3_AD_INAPPROPRIATE_FALLBACK /* fatal */ /* DTLSv1_get_timeout queries the next DTLS handshake timeout. If there is a * timeout in progress, it sets |*out| to the time remaining and returns one. * Otherwise, it returns zero. * * When the timeout expires, call |DTLSv1_handle_timeout| to handle the * retransmit behavior. * * NOTE: This function must be queried again whenever the handshake state * machine changes, including when |DTLSv1_handle_timeout| is called. */ OPENSSL_EXPORT int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out); /* DTLSv1_handle_timeout is called when a DTLS handshake timeout expires. If no * timeout had expired, it returns 0. Otherwise, it retransmits the previous * flight of handshake messages and returns 1. If too many timeouts had expired * without progress or an error occurs, it returns -1. * * NOTE: The caller's external timer should be compatible with the one |ssl| * queries within some fudge factor. Otherwise, the call will be a no-op, but * |DTLSv1_get_timeout| will return an updated timeout. * * WARNING: This function breaks the usual return value convention. */ OPENSSL_EXPORT int DTLSv1_handle_timeout(SSL *ssl); /* SSL_total_renegotiations returns the total number of renegotiation handshakes * peformed by |ssl|. This includes the pending renegotiation, if any. */ OPENSSL_EXPORT int SSL_total_renegotiations(const SSL *ssl); /* SSL_get0_certificate_types, for a client, sets |*out_types| to an array * containing the client certificate types requested by a server. It returns the * length of the array. */ OPENSSL_EXPORT size_t SSL_get0_certificate_types(SSL *ssl, const uint8_t **out_types); OPENSSL_EXPORT int SSL_CTX_set_cipher_list(SSL_CTX *, const char *str); OPENSSL_EXPORT int SSL_CTX_set_cipher_list_tls10(SSL_CTX *, const char *str); OPENSSL_EXPORT int SSL_CTX_set_cipher_list_tls11(SSL_CTX *, const char *str); OPENSSL_EXPORT int SSL_want(const SSL *s); OPENSSL_EXPORT int SSL_get_fd(const SSL *s); OPENSSL_EXPORT int SSL_get_rfd(const SSL *s); OPENSSL_EXPORT int SSL_get_wfd(const SSL *s); OPENSSL_EXPORT const char *SSL_get_cipher_list(const SSL *s, int n); OPENSSL_EXPORT int SSL_pending(const SSL *s); OPENSSL_EXPORT int SSL_set_fd(SSL *s, int fd); OPENSSL_EXPORT int SSL_set_rfd(SSL *s, int fd); OPENSSL_EXPORT int SSL_set_wfd(SSL *s, int fd); OPENSSL_EXPORT int SSL_set_cipher_list(SSL *s, const char *str); OPENSSL_EXPORT const char *SSL_state_string(const SSL *s); OPENSSL_EXPORT const char *SSL_state_string_long(const SSL *s); OPENSSL_EXPORT int SSL_SESSION_print_fp(FILE *fp, const SSL_SESSION *ses); OPENSSL_EXPORT int SSL_SESSION_print(BIO *fp, const SSL_SESSION *ses); OPENSSL_EXPORT STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s); /* SSL_renegotiate_pending returns one if |ssl| is in the middle of a * renegotiation. */ OPENSSL_EXPORT int SSL_renegotiate_pending(SSL *ssl); OPENSSL_EXPORT const char *SSL_alert_type_string_long(int value); OPENSSL_EXPORT const char *SSL_alert_type_string(int value); OPENSSL_EXPORT const char *SSL_alert_desc_string_long(int value); OPENSSL_EXPORT const char *SSL_alert_desc_string(int value); OPENSSL_EXPORT void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx, int mode); OPENSSL_EXPORT int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx); OPENSSL_EXPORT void SSL_set_quiet_shutdown(SSL *ssl, int mode); OPENSSL_EXPORT int SSL_get_quiet_shutdown(const SSL *ssl); OPENSSL_EXPORT void SSL_set_shutdown(SSL *ssl, int mode); OPENSSL_EXPORT int SSL_get_shutdown(const SSL *ssl); OPENSSL_EXPORT SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl); OPENSSL_EXPORT SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx); OPENSSL_EXPORT void SSL_set_info_callback(SSL *ssl, void (*cb)(const SSL *ssl, int type, int val)); OPENSSL_EXPORT void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl, int type, int val); OPENSSL_EXPORT int SSL_state(const SSL *ssl); /* SSL_CTX_get_max_cert_list returns the maximum length, in bytes, of a peer * certificate chain accepted by |ctx|. */ OPENSSL_EXPORT size_t SSL_CTX_get_max_cert_list(const SSL_CTX *ctx); /* SSL_CTX_set_max_cert_list sets the maximum length, in bytes, of a peer * certificate chain to |max_cert_list|. This affects how much memory may be * consumed during the handshake. */ OPENSSL_EXPORT void SSL_CTX_set_max_cert_list(SSL_CTX *ctx, size_t max_cert_list); /* SSL_get_max_cert_list returns the maximum length, in bytes, of a peer * certificate chain accepted by |ssl|. */ OPENSSL_EXPORT size_t SSL_get_max_cert_list(const SSL *ssl); /* SSL_set_max_cert_list sets the maximum length, in bytes, of a peer * certificate chain to |max_cert_list|. This affects how much memory may be * consumed during the handshake. */ OPENSSL_EXPORT void SSL_set_max_cert_list(SSL *ssl, size_t max_cert_list); /* SSL_CTX_set_max_send_fragment sets the maximum length, in bytes, of records * sent by |ctx|. Beyond this length, handshake messages and application data * will be split into multiple records. */ OPENSSL_EXPORT void SSL_CTX_set_max_send_fragment(SSL_CTX *ctx, size_t max_send_fragment); /* SSL_set_max_send_fragment sets the maximum length, in bytes, of records * sent by |ssl|. Beyond this length, handshake messages and application data * will be split into multiple records. */ OPENSSL_EXPORT void SSL_set_max_send_fragment(SSL *ssl, size_t max_send_fragment); /* SSL_CTX_set_dos_protection_cb sets a callback that is called once the * resumption decision for a ClientHello has been made. It can return 1 to * allow the handshake to continue or zero to cause the handshake to abort. */ OPENSSL_EXPORT void SSL_CTX_set_dos_protection_cb( SSL_CTX *ctx, int (*cb)(const struct ssl_early_callback_ctx *)); /* Deprecated functions. */ /* SSL_CIPHER_description writes a description of |cipher| into |buf| and * returns |buf|. If |buf| is NULL, it returns a newly allocated string, to be * freed with |OPENSSL_free|, or NULL on error. * * The description includes a trailing newline and has the form: * AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 * * Consider |SSL_CIPHER_get_name| or |SSL_CIPHER_get_rfc_name| instead. */ OPENSSL_EXPORT const char *SSL_CIPHER_description(const SSL_CIPHER *cipher, char *buf, int len); /* SSL_CIPHER_get_version returns the string "TLSv1/SSLv3". */ OPENSSL_EXPORT const char *SSL_CIPHER_get_version(const SSL_CIPHER *cipher); typedef void COMP_METHOD; /* SSL_COMP_get_compression_methods returns NULL. */ OPENSSL_EXPORT COMP_METHOD *SSL_COMP_get_compression_methods(void); /* SSL_COMP_add_compression_method returns one. */ OPENSSL_EXPORT int SSL_COMP_add_compression_method(int id, COMP_METHOD *cm); /* SSL_COMP_get_name returns NULL. */ OPENSSL_EXPORT const char *SSL_COMP_get_name(const COMP_METHOD *comp); /* SSLv23_method calls |TLS_method|. */ OPENSSL_EXPORT const SSL_METHOD *SSLv23_method(void); /* Version-specific methods behave exactly like |TLS_method| and |DTLS_method| * except they also call |SSL_CTX_set_min_version| and |SSL_CTX_set_max_version| * to lock connections to that protocol version. */ OPENSSL_EXPORT const SSL_METHOD *SSLv3_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_method(void); /* Client- and server-specific methods call their corresponding generic * methods. */ OPENSSL_EXPORT const SSL_METHOD *SSLv23_server_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv23_client_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv3_server_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv3_client_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_client_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_client_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_client_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLS_server_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLS_client_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_server_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_client_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_server_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_client_method(void); /* SSL_clear resets |ssl| to allow another connection and returns one on success * or zero on failure. It returns most configuration state but releases memory * associated with the current connection. * * Free |ssl| and create a new one instead. */ OPENSSL_EXPORT int SSL_clear(SSL *ssl); /* SSL_CTX_set_tmp_rsa_callback does nothing. */ OPENSSL_EXPORT void SSL_CTX_set_tmp_rsa_callback( SSL_CTX *ctx, RSA *(*cb)(SSL *ssl, int is_export, int keylength)); /* SSL_set_tmp_rsa_callback does nothing. */ OPENSSL_EXPORT void SSL_set_tmp_rsa_callback(SSL *ssl, RSA *(*cb)(SSL *ssl, int is_export, int keylength)); /* SSL_CTX_sess_connect returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_connect(const SSL_CTX *ctx); /* SSL_CTX_sess_connect_good returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_connect_good(const SSL_CTX *ctx); /* SSL_CTX_sess_connect_renegotiate returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_connect_renegotiate(const SSL_CTX *ctx); /* SSL_CTX_sess_accept returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_accept(const SSL_CTX *ctx); /* SSL_CTX_sess_accept_renegotiate returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_accept_renegotiate(const SSL_CTX *ctx); /* SSL_CTX_sess_accept_good returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_accept_good(const SSL_CTX *ctx); /* SSL_CTX_sess_hits returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_hits(const SSL_CTX *ctx); /* SSL_CTX_sess_cb_hits returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_cb_hits(const SSL_CTX *ctx); /* SSL_CTX_sess_misses returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_misses(const SSL_CTX *ctx); /* SSL_CTX_sess_timeouts returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_timeouts(const SSL_CTX *ctx); /* SSL_CTX_sess_cache_full returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_cache_full(const SSL_CTX *ctx); /* SSL_cutthrough_complete calls |SSL_in_false_start|. */ OPENSSL_EXPORT int SSL_cutthrough_complete(const SSL *s); /* SSL_num_renegotiations calls |SSL_total_renegotiations|. */ OPENSSL_EXPORT int SSL_num_renegotiations(const SSL *ssl); /* SSL_CTX_need_tmp_RSA returns zero. */ OPENSSL_EXPORT int SSL_CTX_need_tmp_RSA(const SSL_CTX *ctx); /* SSL_need_tmp_RSA returns zero. */ OPENSSL_EXPORT int SSL_need_tmp_RSA(const SSL *ssl); /* SSL_CTX_set_tmp_rsa returns one. */ OPENSSL_EXPORT int SSL_CTX_set_tmp_rsa(SSL_CTX *ctx, const RSA *rsa); /* SSL_set_tmp_rsa returns one. */ OPENSSL_EXPORT int SSL_set_tmp_rsa(SSL *ssl, const RSA *rsa); /* SSL_CTX_get_read_ahead returns zero. */ OPENSSL_EXPORT int SSL_CTX_get_read_ahead(const SSL_CTX *ctx); /* SSL_CTX_set_read_ahead does nothing. */ OPENSSL_EXPORT void SSL_CTX_set_read_ahead(SSL_CTX *ctx, int yes); /* SSL_get_read_ahead returns zero. */ OPENSSL_EXPORT int SSL_get_read_ahead(const SSL *s); /* SSL_set_read_ahead does nothing. */ OPENSSL_EXPORT void SSL_set_read_ahead(SSL *s, int yes); /* SSL_renegotiate put an error on the error queue and returns zero. */ OPENSSL_EXPORT int SSL_renegotiate(SSL *ssl); /* SSL_set_state does nothing. */ OPENSSL_EXPORT void SSL_set_state(SSL *ssl, int state); /* SSL_MODE_HANDSHAKE_CUTTHROUGH is the same as SSL_MODE_ENABLE_FALSE_START. */ #define SSL_MODE_HANDSHAKE_CUTTHROUGH SSL_MODE_ENABLE_FALSE_START /* i2d_SSL_SESSION serializes |in| to the bytes pointed to by |*pp|. On success, * it returns the number of bytes written and advances |*pp| by that many bytes. * On failure, it returns -1. If |pp| is NULL, no bytes are written and only the * length is returned. * * Use |SSL_SESSION_to_bytes| instead. */ OPENSSL_EXPORT int i2d_SSL_SESSION(SSL_SESSION *in, uint8_t **pp); /* d2i_SSL_SESSION parses a serialized session from the |length| bytes pointed * to by |*pp|. It returns the new |SSL_SESSION| and advances |*pp| by the * number of bytes consumed on success and NULL on failure. The caller takes * ownership of the new session and must call |SSL_SESSION_free| when done. * * If |a| is non-NULL, |*a| is released and set the new |SSL_SESSION|. * * Use |SSL_SESSION_from_bytes| instead. */ OPENSSL_EXPORT SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a, const uint8_t **pp, long length); /* ERR_load_SSL_strings does nothing. */ OPENSSL_EXPORT void ERR_load_SSL_strings(void); /* SSL_load_error_strings does nothing. */ OPENSSL_EXPORT void SSL_load_error_strings(void); /* SSL_CTX_set_tlsext_use_srtp calls |SSL_CTX_set_srtp_profiles|. It returns * zero on success and one on failure. * * WARNING: this function is dangerous because it breaks the usual return value * convention. Use |SSL_CTX_set_srtp_profiles| instead. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_use_srtp(SSL_CTX *ctx, const char *profiles); /* SSL_set_tlsext_use_srtp calls |SSL_set_srtp_profiles|. It returns zero on * success and one on failure. * * WARNING: this function is dangerous because it breaks the usual return value * convention. Use |SSL_set_srtp_profiles| instead. */ OPENSSL_EXPORT int SSL_set_tlsext_use_srtp(SSL *ssl, const char *profiles); /* SSL_get_current_compression returns NULL. */ OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_compression(SSL *s); /* SSL_get_current_expansion returns NULL. */ OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_expansion(SSL *s); #define SSL_set_app_data(s, arg) (SSL_set_ex_data(s, 0, (char *)arg)) #define SSL_get_app_data(s) (SSL_get_ex_data(s, 0)) #define SSL_SESSION_set_app_data(s, a) \ (SSL_SESSION_set_ex_data(s, 0, (char *)a)) #define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s, 0)) #define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx, 0)) #define SSL_CTX_set_app_data(ctx, arg) \ (SSL_CTX_set_ex_data(ctx, 0, (char *)arg)) #define OpenSSL_add_ssl_algorithms() SSL_library_init() #define SSLeay_add_ssl_algorithms() SSL_library_init() #define SSL_get_cipher(ssl) SSL_CIPHER_get_name(SSL_get_current_cipher(ssl)) #define SSL_get_cipher_bits(ssl, out_alg_bits) \ SSL_CIPHER_get_bits(SSL_get_current_cipher(ssl), out_alg_bits) #define SSL_get_cipher_version(ssl) \ SSL_CIPHER_get_version(SSL_get_current_cipher(ssl)) #define SSL_get_cipher_name(ssl) \ SSL_CIPHER_get_name(SSL_get_current_cipher(ssl)) #define SSL_get_time(session) SSL_SESSION_get_time(session) #define SSL_set_time(session, time) SSL_SESSION_set_time((session), (time)) #define SSL_get_timeout(session) SSL_SESSION_get_timeout(session) #define SSL_set_timeout(session, timeout) \ SSL_SESSION_set_timeout((session), (timeout)) typedef struct ssl_comp_st SSL_COMP; struct ssl_comp_st { int id; const char *name; char *method; }; DECLARE_STACK_OF(SSL_COMP) /* The following flags toggle individual protocol versions. This is deprecated. * Use |SSL_CTX_set_min_version| and |SSL_CTX_set_max_version| instead. */ #define SSL_OP_NO_SSLv3 0x02000000L #define SSL_OP_NO_TLSv1 0x04000000L #define SSL_OP_NO_TLSv1_2 0x08000000L #define SSL_OP_NO_TLSv1_1 0x10000000L #define SSL_OP_NO_DTLSv1 SSL_OP_NO_TLSv1 #define SSL_OP_NO_DTLSv1_2 SSL_OP_NO_TLSv1_2 /* The following flags do nothing and are included only to make it easier to * compile code with BoringSSL. */ #define SSL_MODE_AUTO_RETRY 0 #define SSL_MODE_RELEASE_BUFFERS 0 #define SSL_MODE_SEND_CLIENTHELLO_TIME 0 #define SSL_MODE_SEND_SERVERHELLO_TIME 0 #define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0 #define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0 #define SSL_OP_EPHEMERAL_RSA 0 #define SSL_OP_MICROSOFT_SESS_ID_BUG 0 #define SSL_OP_MSIE_SSLV2_RSA_PADDING 0 #define SSL_OP_NETSCAPE_CA_DN_BUG 0 #define SSL_OP_NETSCAPE_CHALLENGE_BUG 0 #define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0 #define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0 #define SSL_OP_NO_COMPRESSION 0 #define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0 #define SSL_OP_NO_SSLv2 0 #define SSL_OP_PKCS1_CHECK_1 0 #define SSL_OP_PKCS1_CHECK_2 0 #define SSL_OP_SINGLE_DH_USE 0 #define SSL_OP_SINGLE_ECDH_USE 0 #define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0 #define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0 #define SSL_OP_TLS_BLOCK_PADDING_BUG 0 #define SSL_OP_TLS_ROLLBACK_BUG 0 #define SSL_VERIFY_CLIENT_ONCE 0 /* SSL_cache_hit calls |SSL_session_resumed|. */ OPENSSL_EXPORT int SSL_cache_hit(SSL *ssl); /* SSL_get_default_timeout returns |SSL_DEFAULT_SESSION_TIMEOUT|. */ OPENSSL_EXPORT long SSL_get_default_timeout(const SSL *ssl); /* SSL_get_version returns a string describing the TLS version used by |ssl|. * For example, "TLSv1.2" or "SSLv3". */ OPENSSL_EXPORT const char *SSL_get_version(const SSL *ssl); /* Private structures. * * This structures are exposed for historical reasons, but access to them is * deprecated. */ struct ssl_cipher_st { /* name is the OpenSSL name for the cipher. */ const char *name; /* id is the cipher suite value bitwise OR-d with 0x03000000. */ uint32_t id; /* The following are internal fields. See ssl/internal.h for their values. */ uint32_t algorithm_mkey; uint32_t algorithm_auth; uint32_t algorithm_enc; uint32_t algorithm_mac; uint32_t algorithm_ssl; uint32_t algo_strength; uint32_t algorithm_prf; /* strength_bits is the strength of the cipher in bits. */ int strength_bits; /* alg_bits is the number of bits of key material used by the algorithm. */ int alg_bits; }; struct ssl_session_st { int ssl_version; /* what ssl version session info is being kept in here? */ int master_key_length; uint8_t master_key[SSL_MAX_MASTER_KEY_LENGTH]; /* session_id - valid? */ unsigned int session_id_length; uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; /* this is used to determine whether the session is being reused in * the appropriate context. It is up to the application to set this, * via SSL_new */ unsigned int sid_ctx_length; uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH]; char *psk_identity; /* Used to indicate that session resumption is not allowed. Applications can * also set this bit for a new session via not_resumable_session_cb to * disable session caching and tickets. */ int not_resumable; /* peer is the peer's certificate. */ X509 *peer; /* cert_chain is the certificate chain sent by the peer. NOTE: for historical * reasons, when a client (so the peer is a server), the chain includes * |peer|, but when a server it does not. */ STACK_OF(X509) *cert_chain; /* when app_verify_callback accepts a session where the peer's certificate is * not ok, we must remember the error for session reuse: */ long verify_result; /* only for servers */ CRYPTO_refcount_t references; long timeout; long time; const SSL_CIPHER *cipher; /* key_exchange_info contains an indication of the size of the asymmetric * primitive used in the handshake that created this session. In the event * that two asymmetric operations are used, this value applies to the one * that controls the confidentiality of the connection. Its interpretation * depends on the primitive that was used; as specified by the cipher suite: * DHE: the size, in bits, of the multiplicative group. * RSA: the size, in bits, of the modulus. * ECDHE: the TLS id for the curve. * * A zero indicates that the value is unknown. */ uint32_t key_exchange_info; CRYPTO_EX_DATA ex_data; /* application specific data */ /* These are used to make removal of session-ids more efficient and to * implement a maximum cache size. */ SSL_SESSION *prev, *next; char *tlsext_hostname; /* RFC4507 info */ uint8_t *tlsext_tick; /* Session ticket */ size_t tlsext_ticklen; /* Session ticket length */ uint32_t tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */ size_t tlsext_signed_cert_timestamp_list_length; uint8_t *tlsext_signed_cert_timestamp_list; /* Server's list. */ /* The OCSP response that came with the session. */ size_t ocsp_response_length; uint8_t *ocsp_response; char peer_sha256_valid; /* Non-zero if peer_sha256 is valid */ uint8_t peer_sha256[SHA256_DIGEST_LENGTH]; /* SHA256 of peer certificate */ /* original_handshake_hash contains the handshake hash (either SHA-1+MD5 or * SHA-2, depending on TLS version) for the original, full handshake that * created a session. This is used by Channel IDs during resumption. */ uint8_t original_handshake_hash[EVP_MAX_MD_SIZE]; unsigned int original_handshake_hash_len; /* extended_master_secret is true if the master secret in this session was * generated using EMS and thus isn't vulnerable to the Triple Handshake * attack. */ char extended_master_secret; }; /* ssl_cipher_preference_list_st contains a list of SSL_CIPHERs with * equal-preference groups. For TLS clients, the groups are moot because the * server picks the cipher and groups cannot be expressed on the wire. However, * for servers, the equal-preference groups allow the client's preferences to * be partially respected. (This only has an effect with * SSL_OP_CIPHER_SERVER_PREFERENCE). * * The equal-preference groups are expressed by grouping SSL_CIPHERs together. * All elements of a group have the same priority: no ordering is expressed * within a group. * * The values in |ciphers| are in one-to-one correspondence with * |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of * bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to * indicate that the corresponding SSL_CIPHER is not the last element of a * group, or 0 to indicate that it is. * * For example, if |in_group_flags| contains all zeros then that indicates a * traditional, fully-ordered preference. Every SSL_CIPHER is the last element * of the group (i.e. they are all in a one-element group). * * For a more complex example, consider: * ciphers: A B C D E F * in_group_flags: 1 1 0 0 1 0 * * That would express the following, order: * * A E * B -> D -> F * C */ struct ssl_cipher_preference_list_st { STACK_OF(SSL_CIPHER) *ciphers; uint8_t *in_group_flags; }; struct ssl_ctx_st { const SSL_PROTOCOL_METHOD *method; /* lock is used to protect various operations on this object. */ CRYPTO_MUTEX lock; /* max_version is the maximum acceptable protocol version. If zero, the * maximum supported version, currently (D)TLS 1.2, is used. */ uint16_t max_version; /* min_version is the minimum acceptable protocl version. If zero, the * minimum supported version, currently SSL 3.0 and DTLS 1.0, is used */ uint16_t min_version; struct ssl_cipher_preference_list_st *cipher_list; /* same as above but sorted for lookup */ STACK_OF(SSL_CIPHER) *cipher_list_by_id; /* cipher_list_tls10 is the list of ciphers when TLS 1.0 or greater is in * use. This only applies to server connections as, for clients, the version * number is known at connect time and so the cipher list can be set then. If * |cipher_list_tls11| is non-NULL then this applies only to TLS 1.0 * connections. * * TODO(agl): this exists to assist in the death of SSLv3. It can hopefully * be removed after that. */ struct ssl_cipher_preference_list_st *cipher_list_tls10; /* cipher_list_tls11 is the list of ciphers when TLS 1.1 or greater is in * use. This only applies to server connections as, for clients, the version * number is known at connect time and so the cipher list can be set then. */ struct ssl_cipher_preference_list_st *cipher_list_tls11; X509_STORE *cert_store; LHASH_OF(SSL_SESSION) *sessions; /* Most session-ids that will be cached, default is * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */ unsigned long session_cache_size; SSL_SESSION *session_cache_head; SSL_SESSION *session_cache_tail; /* handshakes_since_cache_flush is the number of successful handshakes since * the last cache flush. */ int handshakes_since_cache_flush; /* This can have one of 2 values, ored together, * SSL_SESS_CACHE_CLIENT, * SSL_SESS_CACHE_SERVER, * Default is SSL_SESSION_CACHE_SERVER, which means only * SSL_accept which cache SSL_SESSIONS. */ int session_cache_mode; /* If timeout is not 0, it is the default timeout value set when SSL_new() is * called. This has been put in to make life easier to set things up */ long session_timeout; /* If this callback is not null, it will be called each time a session id is * added to the cache. If this function returns 1, it means that the * callback will do a SSL_SESSION_free() when it has finished using it. * Otherwise, on 0, it means the callback has finished with it. If * remove_session_cb is not null, it will be called when a session-id is * removed from the cache. After the call, OpenSSL will SSL_SESSION_free() * it. */ int (*new_session_cb)(SSL *ssl, SSL_SESSION *sess); void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *sess); SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *data, int len, int *copy); CRYPTO_refcount_t references; /* if defined, these override the X509_verify_cert() calls */ int (*app_verify_callback)(X509_STORE_CTX *store_ctx, void *arg); void *app_verify_arg; /* Default password callback. */ pem_password_cb *default_passwd_callback; /* Default password callback user data. */ void *default_passwd_callback_userdata; /* get client cert callback */ int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey); /* get channel id callback */ void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey); CRYPTO_EX_DATA ex_data; /* custom_*_extensions stores any callback sets for custom extensions. Note * that these pointers will be NULL if the stack would otherwise be empty. */ STACK_OF(SSL_CUSTOM_EXTENSION) *client_custom_extensions; STACK_OF(SSL_CUSTOM_EXTENSION) *server_custom_extensions; /* Default values used when no per-SSL value is defined follow */ void (*info_callback)(const SSL *ssl, int type, int val); /* used if SSL's info_callback is NULL */ /* what we put in client cert requests */ STACK_OF(X509_NAME) *client_CA; /* Default values to use in SSL structures follow (these are copied by * SSL_new) */ uint32_t options; uint32_t mode; uint32_t max_cert_list; struct cert_st /* CERT */ *cert; /* callback that allows applications to peek at protocol messages */ void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int verify_mode; unsigned int sid_ctx_length; uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH]; int (*default_verify_callback)( int ok, X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */ /* Default generate session ID callback. */ GEN_SESSION_CB generate_session_id; X509_VERIFY_PARAM *param; /* select_certificate_cb is called before most ClientHello processing and * before the decision whether to resume a session is made. It may return one * to continue the handshake or zero to cause the handshake loop to return * with an error and cause SSL_get_error to return * SSL_ERROR_PENDING_CERTIFICATE. Note: when the handshake loop is resumed, it * will not call the callback a second time. */ int (*select_certificate_cb)(const struct ssl_early_callback_ctx *); /* dos_protection_cb is called once the resumption decision for a ClientHello * has been made. It returns one to continue the handshake or zero to * abort. */ int (*dos_protection_cb) (const struct ssl_early_callback_ctx *); /* quiet_shutdown is true if the connection should not send a close_notify on * shutdown. */ int quiet_shutdown; /* Maximum amount of data to send in one fragment. actual record size can be * more than this due to padding and MAC overheads. */ uint16_t max_send_fragment; /* TLS extensions servername callback */ int (*tlsext_servername_callback)(SSL *, int *, void *); void *tlsext_servername_arg; /* RFC 4507 session ticket keys */ uint8_t tlsext_tick_key_name[SSL_TICKET_KEY_NAME_LEN]; uint8_t tlsext_tick_hmac_key[16]; uint8_t tlsext_tick_aes_key[16]; /* Callback to support customisation of ticket key setting */ int (*tlsext_ticket_key_cb)(SSL *ssl, uint8_t *name, uint8_t *iv, EVP_CIPHER_CTX *ectx, HMAC_CTX *hctx, int enc); /* Server-only: psk_identity_hint is the default identity hint to send in * PSK-based key exchanges. */ char *psk_identity_hint; unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, uint8_t *psk, unsigned int max_psk_len); unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned int max_psk_len); /* retain_only_sha256_of_client_certs is true if we should compute the SHA256 * hash of the peer's certifiate and then discard it to save memory and * session space. Only effective on the server side. */ char retain_only_sha256_of_client_certs; /* Next protocol negotiation information */ /* (for experimental NPN extension). */ /* For a server, this contains a callback function by which the set of * advertised protocols can be provided. */ int (*next_protos_advertised_cb)(SSL *ssl, const uint8_t **out, unsigned *out_len, void *arg); void *next_protos_advertised_cb_arg; /* For a client, this contains a callback function that selects the * next protocol from the list provided by the server. */ int (*next_proto_select_cb)(SSL *ssl, uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg); void *next_proto_select_cb_arg; /* ALPN information * (we are in the process of transitioning from NPN to ALPN.) */ /* For a server, this contains a callback function that allows the * server to select the protocol for the connection. * out: on successful return, this must point to the raw protocol * name (without the length prefix). * outlen: on successful return, this contains the length of |*out|. * in: points to the client's list of supported protocols in * wire-format. * inlen: the length of |in|. */ int (*alpn_select_cb)(SSL *s, const uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg); void *alpn_select_cb_arg; /* For a client, this contains the list of supported protocols in wire * format. */ uint8_t *alpn_client_proto_list; unsigned alpn_client_proto_list_len; /* SRTP profiles we are willing to do from RFC 5764 */ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; /* EC extension values inherited by SSL structure */ size_t tlsext_ellipticcurvelist_length; uint16_t *tlsext_ellipticcurvelist; /* If true, a client will advertise the Channel ID extension and a server * will echo it. */ char tlsext_channel_id_enabled; /* The client's Channel ID private key. */ EVP_PKEY *tlsext_channel_id_private; /* If true, a client will request certificate timestamps. */ char signed_cert_timestamps_enabled; /* Signed certificate timestamp list to be sent to the client, if requested */ uint8_t *signed_cert_timestamp_list; size_t signed_cert_timestamp_list_length; /* If true, a client will request a stapled OCSP response. */ char ocsp_stapling_enabled; /* OCSP response to be sent to the client, if requested. */ uint8_t *ocsp_response; size_t ocsp_response_length; /* If not NULL, session key material will be logged to this BIO for debugging * purposes. The format matches NSS's and is readable by Wireshark. */ BIO *keylog_bio; /* current_time_cb, if not NULL, is the function to use to get the current * time. It sets |*out_clock| to the current time. */ void (*current_time_cb)(const SSL *ssl, struct timeval *out_clock); }; struct ssl_st { /* version is the protocol version. */ int version; /* method is the method table corresponding to the current protocol (DTLS or * TLS). */ const SSL_PROTOCOL_METHOD *method; /* enc_method is the method table corresponding to the current protocol * version. */ const SSL3_ENC_METHOD *enc_method; /* max_version is the maximum acceptable protocol version. If zero, the * maximum supported version, currently (D)TLS 1.2, is used. */ uint16_t max_version; /* min_version is the minimum acceptable protocl version. If zero, the * minimum supported version, currently SSL 3.0 and DTLS 1.0, is used */ uint16_t min_version; /* There are 2 BIO's even though they are normally both the same. This is so * data can be read and written to different handlers */ BIO *rbio; /* used by SSL_read */ BIO *wbio; /* used by SSL_write */ BIO *bbio; /* used during session-id reuse to concatenate * messages */ /* This holds a variable that indicates what we were doing when a 0 or -1 is * returned. This is needed for non-blocking IO so we know what request * needs re-doing when in SSL_accept or SSL_connect */ int rwstate; /* true when we are actually in SSL_accept() or SSL_connect() */ int in_handshake; int (*handshake_func)(SSL *); /* Imagine that here's a boolean member "init" that is switched as soon as * SSL_set_{accept/connect}_state is called for the first time, so that * "state" and "handshake_func" are properly initialized. But as * handshake_func is == 0 until then, we use this test instead of an "init" * member. */ /* server is true iff the this SSL* is the server half. Note: before the SSL* * is initialized by either SSL_set_accept_state or SSL_set_connect_state, * the side is not determined. In this state, server is always false. */ int server; /* quiet_shutdown is true if the connection should not send a close_notify on * shutdown. */ int quiet_shutdown; int shutdown; /* we have shut things down, 0x01 sent, 0x02 * for received */ int state; /* where we are */ BUF_MEM *init_buf; /* buffer used during init */ uint8_t *init_msg; /* pointer to handshake message body, set by ssl3_get_message() */ int init_num; /* amount read/written */ int init_off; /* amount read/written */ struct ssl3_state_st *s3; /* SSLv3 variables */ struct dtls1_state_st *d1; /* DTLSv1 variables */ /* callback that allows applications to peek at protocol messages */ void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int hit; /* reusing a previous session */ X509_VERIFY_PARAM *param; /* crypto */ struct ssl_cipher_preference_list_st *cipher_list; STACK_OF(SSL_CIPHER) *cipher_list_by_id; SSL_AEAD_CTX *aead_read_ctx; SSL_AEAD_CTX *aead_write_ctx; /* session info */ /* client cert? */ /* This is used to hold the server certificate used */ struct cert_st /* CERT */ *cert; /* the session_id_context is used to ensure sessions are only reused * in the appropriate context */ unsigned int sid_ctx_length; uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH]; /* This can also be in the session once a session is established */ SSL_SESSION *session; /* Default generate session ID callback. */ GEN_SESSION_CB generate_session_id; /* Used in SSL2 and SSL3 */ int verify_mode; /* 0 don't care about verify failure. * 1 fail if verify fails */ int (*verify_callback)(int ok, X509_STORE_CTX *ctx); /* fail if callback returns 0 */ void (*info_callback)(const SSL *ssl, int type, int val); /* optional informational callback */ /* Server-only: psk_identity_hint is the identity hint to send in * PSK-based key exchanges. */ char *psk_identity_hint; unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, uint8_t *psk, unsigned int max_psk_len); unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned int max_psk_len); SSL_CTX *ctx; /* extra application data */ long verify_result; CRYPTO_EX_DATA ex_data; /* for server side, keep the list of CA_dn we can use */ STACK_OF(X509_NAME) *client_CA; uint32_t options; /* protocol behaviour */ uint32_t mode; /* API behaviour */ uint32_t max_cert_list; int client_version; /* what was passed, used for * SSLv3/TLS rollback check */ uint16_t max_send_fragment; char *tlsext_hostname; /* RFC4507 session ticket expected to be received or sent */ int tlsext_ticket_expected; size_t tlsext_ellipticcurvelist_length; uint16_t *tlsext_ellipticcurvelist; /* our list */ SSL_CTX *initial_ctx; /* initial ctx, used to store sessions */ /* Next protocol negotiation. For the client, this is the protocol that we * sent in NextProtocol and is set when handling ServerHello extensions. * * For a server, this is the client's selected_protocol from NextProtocol and * is set when handling the NextProtocol message, before the Finished * message. */ uint8_t *next_proto_negotiated; size_t next_proto_negotiated_len; /* srtp_profiles is the list of configured SRTP protection profiles for * DTLS-SRTP. */ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; /* srtp_profile is the selected SRTP protection profile for * DTLS-SRTP. */ const SRTP_PROTECTION_PROFILE *srtp_profile; /* Copied from the SSL_CTX. For a server, means that we'll accept Channel IDs * from clients. For a client, means that we'll advertise support. */ char tlsext_channel_id_enabled; /* The client's Channel ID private key. */ EVP_PKEY *tlsext_channel_id_private; /* Enable signed certificate time stamps. Currently client only. */ char signed_cert_timestamps_enabled; /* ocsp_stapling_enabled is only used by client connections and indicates * whether OCSP stapling will be requested. */ char ocsp_stapling_enabled; /* For a client, this contains the list of supported protocols in wire * format. */ uint8_t *alpn_client_proto_list; unsigned alpn_client_proto_list_len; /* accept_peer_renegotiations, if one, accepts renegotiation attempts from the * peer. Otherwise, they will be rejected with a fatal error. */ char accept_peer_renegotiations; /* These fields are always NULL and exist only to keep wpa_supplicant happy * about the change to EVP_AEAD. They are only needed for EAP-FAST, which we * don't support. */ EVP_CIPHER_CTX *enc_read_ctx; EVP_MD_CTX *read_hash; }; /* Android compatibility section. * * These functions are declared, temporarily, for Android because * wpa_supplicant will take a little time to sync with upstream. Outside of * Android they'll have no definition. */ #define SSL_F_SSL_SET_SESSION_TICKET_EXT doesnt_exist OPENSSL_EXPORT int SSL_set_session_ticket_ext(SSL *s, void *ext_data, int ext_len); OPENSSL_EXPORT int SSL_set_session_secret_cb(SSL *s, void *cb, void *arg); OPENSSL_EXPORT int SSL_set_session_ticket_ext_cb(SSL *s, void *cb, void *arg); OPENSSL_EXPORT int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method); #define OPENSSL_VERSION_TEXT "BoringSSL" #define SSLEAY_VERSION 0 /* SSLeay_version is a compatibility function that returns the string * "BoringSSL". */ OPENSSL_EXPORT const char *SSLeay_version(int unused); /* Preprocessor compatibility section. * * Historically, a number of APIs were implemented in OpenSSL as macros and * constants to 'ctrl' functions. To avoid breaking #ifdefs in consumers, this * section defines a number of legacy macros. * * Although using either the CTRL values or their wrapper macros in #ifdefs is * still supported, the CTRL values may not be passed to |SSL_ctrl| and * |SSL_CTX_ctrl|. Call the functions (previously wrapper macros) instead. */ #define DTLS_CTRL_GET_TIMEOUT doesnt_exist #define DTLS_CTRL_HANDLE_TIMEOUT doesnt_exist #define SSL_CTRL_CHAIN doesnt_exist #define SSL_CTRL_CHAIN_CERT doesnt_exist #define SSL_CTRL_CHANNEL_ID doesnt_exist #define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS doesnt_exist #define SSL_CTRL_CLEAR_MODE doesnt_exist #define SSL_CTRL_CLEAR_OPTIONS doesnt_exist #define SSL_CTRL_EXTRA_CHAIN_CERT doesnt_exist #define SSL_CTRL_GET_CHAIN_CERTS doesnt_exist #define SSL_CTRL_GET_CHANNEL_ID doesnt_exist #define SSL_CTRL_GET_CLIENT_CERT_TYPES doesnt_exist #define SSL_CTRL_GET_EXTRA_CHAIN_CERTS doesnt_exist #define SSL_CTRL_GET_MAX_CERT_LIST doesnt_exist #define SSL_CTRL_GET_NUM_RENEGOTIATIONS doesnt_exist #define SSL_CTRL_GET_READ_AHEAD doesnt_exist #define SSL_CTRL_GET_RI_SUPPORT doesnt_exist #define SSL_CTRL_GET_SESSION_REUSED doesnt_exist #define SSL_CTRL_GET_SESS_CACHE_MODE doesnt_exist #define SSL_CTRL_GET_SESS_CACHE_SIZE doesnt_exist #define SSL_CTRL_GET_TLSEXT_TICKET_KEYS doesnt_exist #define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS doesnt_exist #define SSL_CTRL_MODE doesnt_exist #define SSL_CTRL_NEED_TMP_RSA doesnt_exist #define SSL_CTRL_OPTIONS doesnt_exist #define SSL_CTRL_SESS_NUMBER doesnt_exist #define SSL_CTRL_SET_CHANNEL_ID doesnt_exist #define SSL_CTRL_SET_CURVES doesnt_exist #define SSL_CTRL_SET_MAX_CERT_LIST doesnt_exist #define SSL_CTRL_SET_MAX_SEND_FRAGMENT doesnt_exist #define SSL_CTRL_SET_MSG_CALLBACK doesnt_exist #define SSL_CTRL_SET_MSG_CALLBACK_ARG doesnt_exist #define SSL_CTRL_SET_MTU doesnt_exist #define SSL_CTRL_SET_READ_AHEAD doesnt_exist #define SSL_CTRL_SET_SESS_CACHE_MODE doesnt_exist #define SSL_CTRL_SET_SESS_CACHE_SIZE doesnt_exist #define SSL_CTRL_SET_TLSEXT_HOSTNAME doesnt_exist #define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG doesnt_exist #define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB doesnt_exist #define SSL_CTRL_SET_TLSEXT_TICKET_KEYS doesnt_exist #define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB doesnt_exist #define SSL_CTRL_SET_TMP_DH doesnt_exist #define SSL_CTRL_SET_TMP_DH_CB doesnt_exist #define SSL_CTRL_SET_TMP_ECDH doesnt_exist #define SSL_CTRL_SET_TMP_ECDH_CB doesnt_exist #define SSL_CTRL_SET_TMP_RSA doesnt_exist #define SSL_CTRL_SET_TMP_RSA_CB doesnt_exist #define DTLSv1_get_timeout DTLSv1_get_timeout #define DTLSv1_handle_timeout DTLSv1_handle_timeout #define SSL_CTX_add0_chain_cert SSL_CTX_add0_chain_cert #define SSL_CTX_add1_chain_cert SSL_CTX_add1_chain_cert #define SSL_CTX_add_extra_chain_cert SSL_CTX_add_extra_chain_cert #define SSL_CTX_clear_extra_chain_certs SSL_CTX_clear_extra_chain_certs #define SSL_CTX_clear_chain_certs SSL_CTX_clear_chain_certs #define SSL_CTX_clear_mode SSL_CTX_clear_mode #define SSL_CTX_clear_options SSL_CTX_clear_options #define SSL_CTX_enable_tls_channel_id SSL_CTX_enable_tls_channel_id #define SSL_CTX_get0_chain_certs SSL_CTX_get0_chain_certs #define SSL_CTX_get_extra_chain_certs SSL_CTX_get_extra_chain_certs #define SSL_CTX_get_max_cert_list SSL_CTX_get_max_cert_list #define SSL_CTX_get_mode SSL_CTX_get_mode #define SSL_CTX_get_options SSL_CTX_get_options #define SSL_CTX_get_read_ahead SSL_CTX_get_read_ahead #define SSL_CTX_get_session_cache_mode SSL_CTX_get_session_cache_mode #define SSL_CTX_get_tlsext_ticket_keys SSL_CTX_get_tlsext_ticket_keys #define SSL_CTX_need_tmp_RSA SSL_CTX_need_tmp_RSA #define SSL_CTX_sess_get_cache_size SSL_CTX_sess_get_cache_size #define SSL_CTX_sess_number SSL_CTX_sess_number #define SSL_CTX_sess_set_cache_size SSL_CTX_sess_set_cache_size #define SSL_CTX_set0_chain SSL_CTX_set0_chain #define SSL_CTX_set1_chain SSL_CTX_set1_chain #define SSL_CTX_set1_curves SSL_CTX_set1_curves #define SSL_CTX_set1_tls_channel_id SSL_CTX_set1_tls_channel_id #define SSL_CTX_set_max_cert_list SSL_CTX_set_max_cert_list #define SSL_CTX_set_max_send_fragment SSL_CTX_set_max_send_fragment #define SSL_CTX_set_mode SSL_CTX_set_mode #define SSL_CTX_set_msg_callback_arg SSL_CTX_set_msg_callback_arg #define SSL_CTX_set_options SSL_CTX_set_options #define SSL_CTX_set_read_ahead SSL_CTX_set_read_ahead #define SSL_CTX_set_session_cache_mode SSL_CTX_set_session_cache_mode #define SSL_CTX_set_tlsext_servername_arg SSL_CTX_set_tlsext_servername_arg #define SSL_CTX_set_tlsext_servername_callback \ SSL_CTX_set_tlsext_servername_callback #define SSL_CTX_set_tlsext_ticket_key_cb SSL_CTX_set_tlsext_ticket_key_cb #define SSL_CTX_set_tlsext_ticket_keys SSL_CTX_set_tlsext_ticket_keys #define SSL_CTX_set_tmp_dh SSL_CTX_set_tmp_dh #define SSL_CTX_set_tmp_ecdh SSL_CTX_set_tmp_ecdh #define SSL_CTX_set_tmp_rsa SSL_CTX_set_tmp_rsa #define SSL_add0_chain_cert SSL_add0_chain_cert #define SSL_add1_chain_cert SSL_add1_chain_cert #define SSL_clear_chain_certs SSL_clear_chain_certs #define SSL_clear_mode SSL_clear_mode #define SSL_clear_options SSL_clear_options #define SSL_enable_tls_channel_id SSL_enable_tls_channel_id #define SSL_get0_certificate_types SSL_get0_certificate_types #define SSL_get0_chain_certs SSL_get0_chain_certs #define SSL_get_max_cert_list SSL_get_max_cert_list #define SSL_get_mode SSL_get_mode #define SSL_get_options SSL_get_options #define SSL_get_secure_renegotiation_support \ SSL_get_secure_renegotiation_support #define SSL_get_tls_channel_id SSL_get_tls_channel_id #define SSL_need_tmp_RSA SSL_need_tmp_RSA #define SSL_num_renegotiations SSL_num_renegotiations #define SSL_session_reused SSL_session_reused #define SSL_set0_chain SSL_set0_chain #define SSL_set1_chain SSL_set1_chain #define SSL_set1_curves SSL_set1_curves #define SSL_set1_tls_channel_id SSL_set1_tls_channel_id #define SSL_set_max_cert_list SSL_set_max_cert_list #define SSL_set_max_send_fragment SSL_set_max_send_fragment #define SSL_set_mode SSL_set_mode #define SSL_set_msg_callback_arg SSL_set_msg_callback_arg #define SSL_set_mtu SSL_set_mtu #define SSL_set_options SSL_set_options #define SSL_set_tlsext_host_name SSL_set_tlsext_host_name #define SSL_set_tmp_dh SSL_set_tmp_dh #define SSL_set_tmp_ecdh SSL_set_tmp_ecdh #define SSL_set_tmp_rsa SSL_set_tmp_rsa #define SSL_total_renegotiations SSL_total_renegotiations #if defined(__cplusplus) } /* extern C */ #endif /* Library consumers assume these headers are included by ssl.h, but they depend * on ssl.h, so include them after all declarations. * * TODO(davidben): The separation between ssl.h and these version-specific * headers introduces circular dependencies and is inconsistent. The function * declarations should move to ssl.h. Many of the constants can probably be * pruned or unexported. */ #include #include /* This is mostly sslv3 with a few tweaks */ /* BEGIN ERROR CODES */ /* The following lines are auto generated by the script make_errors.go. Any * changes made after this point may be overwritten when the script is next run. */ #define SSL_R_APP_DATA_IN_HANDSHAKE 100 #define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 101 #define SSL_R_BAD_ALERT 102 #define SSL_R_BAD_CHANGE_CIPHER_SPEC 103 #define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 104 #define SSL_R_BAD_DH_P_LENGTH 105 #define SSL_R_BAD_DIGEST_LENGTH 106 #define SSL_R_BAD_ECC_CERT 107 #define SSL_R_BAD_ECPOINT 108 #define SSL_R_BAD_HANDSHAKE_LENGTH 109 #define SSL_R_BAD_HANDSHAKE_RECORD 110 #define SSL_R_BAD_HELLO_REQUEST 111 #define SSL_R_BAD_LENGTH 112 #define SSL_R_BAD_PACKET_LENGTH 113 #define SSL_R_BAD_RSA_ENCRYPT 114 #define SSL_R_BAD_SIGNATURE 115 #define SSL_R_BAD_SRTP_MKI_VALUE 116 #define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST 117 #define SSL_R_BAD_SSL_FILETYPE 118 #define SSL_R_BAD_WRITE_RETRY 119 #define SSL_R_BIO_NOT_SET 120 #define SSL_R_BN_LIB 121 #define SSL_R_CANNOT_SERIALIZE_PUBLIC_KEY 122 #define SSL_R_CA_DN_LENGTH_MISMATCH 123 #define SSL_R_CA_DN_TOO_LONG 124 #define SSL_R_CCS_RECEIVED_EARLY 125 #define SSL_R_CERTIFICATE_VERIFY_FAILED 126 #define SSL_R_CERT_CB_ERROR 127 #define SSL_R_CERT_LENGTH_MISMATCH 128 #define SSL_R_CHANNEL_ID_NOT_P256 129 #define SSL_R_CHANNEL_ID_SIGNATURE_INVALID 130 #define SSL_R_CIPHER_CODE_WRONG_LENGTH 131 #define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 132 #define SSL_R_CLIENTHELLO_PARSE_FAILED 133 #define SSL_R_CLIENTHELLO_TLSEXT 134 #define SSL_R_CONNECTION_REJECTED 135 #define SSL_R_CONNECTION_TYPE_NOT_SET 136 #define SSL_R_COOKIE_MISMATCH 137 #define SSL_R_D2I_ECDSA_SIG 138 #define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 139 #define SSL_R_DATA_LENGTH_TOO_LONG 140 #define SSL_R_DECODE_ERROR 141 #define SSL_R_DECRYPTION_FAILED 142 #define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 143 #define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 144 #define SSL_R_DIGEST_CHECK_FAILED 145 #define SSL_R_DTLS_MESSAGE_TOO_BIG 146 #define SSL_R_ECC_CERT_NOT_FOR_SIGNING 147 #define SSL_R_EMPTY_SRTP_PROTECTION_PROFILE_LIST 148 #define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 149 #define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 150 #define SSL_R_EVP_DIGESTSIGNFINAL_FAILED 151 #define SSL_R_EVP_DIGESTSIGNINIT_FAILED 152 #define SSL_R_EXCESSIVE_MESSAGE_SIZE 153 #define SSL_R_EXTRA_DATA_IN_MESSAGE 154 #define SSL_R_GOT_A_FIN_BEFORE_A_CCS 155 #define SSL_R_GOT_CHANNEL_ID_BEFORE_A_CCS 156 #define SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS 157 #define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION 158 #define SSL_R_HANDSHAKE_FAILURE_ON_CLIENT_HELLO 159 #define SSL_R_HANDSHAKE_RECORD_BEFORE_CCS 160 #define SSL_R_HTTPS_PROXY_REQUEST 161 #define SSL_R_HTTP_REQUEST 162 #define SSL_R_INAPPROPRIATE_FALLBACK 163 #define SSL_R_INVALID_COMMAND 164 #define SSL_R_INVALID_MESSAGE 165 #define SSL_R_INVALID_SSL_SESSION 166 #define SSL_R_INVALID_TICKET_KEYS_LENGTH 167 #define SSL_R_LENGTH_MISMATCH 168 #define SSL_R_LIBRARY_HAS_NO_CIPHERS 169 #define SSL_R_MISSING_DH_KEY 170 #define SSL_R_MISSING_ECDSA_SIGNING_CERT 171 #define SSL_R_MISSING_RSA_CERTIFICATE 172 #define SSL_R_MISSING_RSA_ENCRYPTING_CERT 173 #define SSL_R_MISSING_RSA_SIGNING_CERT 174 #define SSL_R_MISSING_TMP_DH_KEY 175 #define SSL_R_MISSING_TMP_ECDH_KEY 176 #define SSL_R_MIXED_SPECIAL_OPERATOR_WITH_GROUPS 177 #define SSL_R_MTU_TOO_SMALL 178 #define SSL_R_NESTED_GROUP 179 #define SSL_R_NO_CERTIFICATES_RETURNED 180 #define SSL_R_NO_CERTIFICATE_ASSIGNED 181 #define SSL_R_NO_CERTIFICATE_SET 182 #define SSL_R_NO_CIPHERS_AVAILABLE 183 #define SSL_R_NO_CIPHERS_PASSED 184 #define SSL_R_NO_CIPHERS_SPECIFIED 185 #define SSL_R_NO_CIPHER_MATCH 186 #define SSL_R_NO_COMPRESSION_SPECIFIED 187 #define SSL_R_NO_METHOD_SPECIFIED 188 #define SSL_R_NO_P256_SUPPORT 189 #define SSL_R_NO_PRIVATE_KEY_ASSIGNED 190 #define SSL_R_NO_RENEGOTIATION 191 #define SSL_R_NO_REQUIRED_DIGEST 192 #define SSL_R_NO_SHARED_CIPHER 193 #define SSL_R_NO_SHARED_SIGATURE_ALGORITHMS 194 #define SSL_R_NO_SRTP_PROFILES 195 #define SSL_R_NULL_SSL_CTX 196 #define SSL_R_NULL_SSL_METHOD_PASSED 197 #define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 198 #define SSL_R_PACKET_LENGTH_TOO_LONG 199 #define SSL_R_PARSE_TLSEXT 200 #define SSL_R_PATH_TOO_LONG 201 #define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 202 #define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 203 #define SSL_R_PROTOCOL_IS_SHUTDOWN 204 #define SSL_R_PSK_IDENTITY_NOT_FOUND 205 #define SSL_R_PSK_NO_CLIENT_CB 206 #define SSL_R_PSK_NO_SERVER_CB 207 #define SSL_R_READ_BIO_NOT_SET 208 #define SSL_R_READ_TIMEOUT_EXPIRED 209 #define SSL_R_RECORD_LENGTH_MISMATCH 210 #define SSL_R_RECORD_TOO_LARGE 211 #define SSL_R_RENEGOTIATE_EXT_TOO_LONG 212 #define SSL_R_RENEGOTIATION_ENCODING_ERR 213 #define SSL_R_RENEGOTIATION_MISMATCH 214 #define SSL_R_REQUIRED_CIPHER_MISSING 215 #define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 216 #define SSL_R_SERVERHELLO_TLSEXT 217 #define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 218 #define SSL_R_SESSION_MAY_NOT_BE_CREATED 219 #define SSL_R_SIGNATURE_ALGORITHMS_ERROR 220 #define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES 221 #define SSL_R_SRTP_PROTECTION_PROFILE_LIST_TOO_LONG 222 #define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE 223 #define SSL_R_SSL3_EXT_INVALID_SERVERNAME 224 #define SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE 225 #define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 226 #define SSL_R_SSL_HANDSHAKE_FAILURE 227 #define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 228 #define SSL_R_SSL_SESSION_ID_CONFLICT 229 #define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 230 #define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 231 #define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 232 #define SSL_R_TLS_ILLEGAL_EXPORTER_LABEL 233 #define SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST 234 #define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 235 #define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 236 #define SSL_R_TOO_MANY_EMPTY_FRAGMENTS 237 #define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 238 #define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239 #define SSL_R_UNEXPECTED_GROUP_CLOSE 240 #define SSL_R_UNEXPECTED_MESSAGE 241 #define SSL_R_UNEXPECTED_OPERATOR_IN_GROUP 242 #define SSL_R_UNEXPECTED_RECORD 243 #define SSL_R_UNINITIALIZED 244 #define SSL_R_UNKNOWN_ALERT_TYPE 245 #define SSL_R_UNKNOWN_CERTIFICATE_TYPE 246 #define SSL_R_UNKNOWN_CIPHER_RETURNED 247 #define SSL_R_UNKNOWN_CIPHER_TYPE 248 #define SSL_R_UNKNOWN_DIGEST 249 #define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 250 #define SSL_R_UNKNOWN_PROTOCOL 251 #define SSL_R_UNKNOWN_SSL_VERSION 252 #define SSL_R_UNKNOWN_STATE 253 #define SSL_R_UNPROCESSED_HANDSHAKE_DATA 254 #define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 255 #define SSL_R_UNSUPPORTED_CIPHER 256 #define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257 #define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 258 #define SSL_R_UNSUPPORTED_PROTOCOL 259 #define SSL_R_UNSUPPORTED_SSL_VERSION 260 #define SSL_R_USE_SRTP_NOT_NEGOTIATED 261 #define SSL_R_WRONG_CERTIFICATE_TYPE 262 #define SSL_R_WRONG_CIPHER_RETURNED 263 #define SSL_R_WRONG_CURVE 264 #define SSL_R_WRONG_MESSAGE_TYPE 265 #define SSL_R_WRONG_SIGNATURE_TYPE 266 #define SSL_R_WRONG_SSL_VERSION 267 #define SSL_R_WRONG_VERSION_NUMBER 268 #define SSL_R_X509_LIB 269 #define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 270 #define SSL_R_FRAGMENT_MISMATCH 271 #define SSL_R_BUFFER_TOO_SMALL 272 #define SSL_R_OLD_SESSION_VERSION_NOT_RETURNED 273 #define SSL_R_OUTPUT_ALIASES_INPUT 274 #define SSL_R_RESUMED_EMS_SESSION_WITHOUT_EMS_EXTENSION 275 #define SSL_R_EMS_STATE_INCONSISTENT 276 #define SSL_R_RESUMED_NON_EMS_SESSION_WITH_EMS_EXTENSION 277 #define SSL_R_TOO_MANY_WARNING_ALERTS 278 #define SSL_R_UNEXPECTED_EXTENSION 279 #define SSL_R_SIGNATURE_ALGORITHMS_EXTENSION_SENT_BY_SERVER 280 #define SSL_R_ERROR_ADDING_EXTENSION 281 #define SSL_R_ERROR_PARSING_EXTENSION 282 #define SSL_R_MISSING_EXTENSION 283 #define SSL_R_CUSTOM_EXTENSION_CONTENTS_TOO_LARGE 284 #define SSL_R_CUSTOM_EXTENSION_ERROR 285 #define SSL_R_NEGOTIATED_BOTH_NPN_AND_ALPN 286 #define SSL_R_SSLV3_ALERT_CLOSE_NOTIFY 1000 #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010 #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020 #define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021 #define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022 #define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030 #define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040 #define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041 #define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042 #define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043 #define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044 #define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045 #define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046 #define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047 #define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048 #define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049 #define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050 #define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051 #define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060 #define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070 #define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071 #define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080 #define SSL_R_TLSV1_ALERT_INAPPROPRIATE_FALLBACK 1086 #define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090 #define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100 #define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 1110 #define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 1111 #define SSL_R_TLSV1_UNRECOGNIZED_NAME 1112 #define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 1113 #define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 1114 #endif /* OPENSSL_HEADER_SSL_H */