fix readme mixed dos/unix

Change-Id: Iefcc96166398a9e12f9339fdc707f6d0214cea73

4 files changed, 98 insertions, 98 deletions

diff --git a/Linux/README b/Linux/README
index a181796..a0ca91e 100644
--- a/Linux/README
+++ b/Linux/README
@@ -84,11 +84,11 @@ Performing a Custom Flash with Heimdall Frontend:
     This is the advanced means of flashing firmware to your device.

 

     If you're not an advanced user or a developer, in the event that a Heimdall

-    Firmware Package doesn't exist for the particular firmware (or files) that
-    you wish to flash, then I strongly recommend you get in touch with the
-    developer of the firmware (or files) and politely ask them to create a
-    Heimdall Firmware Package for you. In doing so, you avoid the risk of
-    making mistakes due to inexperience.
+    Firmware Package doesn't exist for the particular firmware (or files) that

+    you wish to flash, then I strongly recommend you get in touch with the

+    developer of the firmware (or files) and politely ask them to create a

+    Heimdall Firmware Package for you. In doing so, you avoid the risk of

+    making mistakes due to inexperience.

 

 

     If you're looking to customise an existing Heimdall Firmware Package then

@@ -118,14 +118,14 @@ Performing a Custom Flash with Heimdall Frontend:
     5. Before you can chose which partitions you want to flash with particular

        files you MUST first select a PIT file. To do this click the "Browse"

        button in the "PIT" section. This will open a dialogue allowing you to

-       navigate to and select a valid PIT (.pit) file.
+       navigate to and select a valid PIT (.pit) file.

 

-       If you do not already have a valid PIT file stored on your computer you
-       can download your device's PIT file from the "Utilities" tab.
-
-    6. If a valid PIT file has been selected then the "Add" button below the
-       "Partitions (Files)" list-box will be enabled. Press this button to add
-       a partition to your flash.
+       If you do not already have a valid PIT file stored on your computer you

+       can download your device's PIT file from the "Utilities" tab.

+

+    6. If a valid PIT file has been selected then the "Add" button below the

+       "Partitions (Files)" list-box will be enabled. Press this button to add

+       a partition to your flash.

 

     7. When you first add a partition you will see the "Partition Name" and

        "Partition ID" be populated with information. Use the "Partition Name"

@@ -255,11 +255,11 @@ How to Create a Heimdall Firmware Package:
         Firmware Name - This is the name of your particular firmware. An

             example would be "Cyanogenmod".

 

-        Firmware Version - This is the version identifier for your package. Any
-            valid string will be accepted, although the inclusion of decimal
-            point version number is preferred i.e. "7.1". If it makes sense
-            then feel free to append a text string like "RC1" or "Beta 1" to
-            the decimal point version.
+        Firmware Version - This is the version identifier for your package. Any

+            valid string will be accepted, although the inclusion of decimal

+            point version number is preferred i.e. "7.1". If it makes sense

+            then feel free to append a text string like "RC1" or "Beta 1" to

+            the decimal point version.

 

         Platform Name - This is the name of platform (or operating system) that

             your firmware is based on. In most cases this will simply be

@@ -296,8 +296,8 @@ How to Create a Heimdall Firmware Package:
             team name. Click "Add" and the developer will be added to the list

             on the right. If you make a mistake you can select a developer from

             the list and click "Remove". You can list as many developers as you

-            like, however visual constraints of the "Load Package" tab means
-            only a few names will be visible. Where possible you may want to
+            like, however visual constraints of the "Load Package" tab means

+            only a few names will be visible. Where possible you may want to

             opt for team names over listing individual team members.

 

 

@@ -360,8 +360,8 @@ for the format in their own software.
 

 

 All Heimdall Firmware Packages must contain a file called firmware.xml. This

-file stores flash information and meta-data for the package as well as
-information about other files contained within the package.
+file stores flash information and meta-data for the package as well as

+information about other files contained within the package.

 

 

 The format is fairly straight-forward so it won't be explained in great detail.

@@ -462,9 +462,9 @@ be included.
 

 Appendix B - Installing Heimdall from Source:

 

-    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and
-       libusb-1.0-dev (v1.0.8 or newer).
-
+    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and

+       libusb-1.0-dev (v1.0.8 or newer).

+

        NOTE: Package names may not be absolutely identical to those above.

 

     2. Open a terminal and navigate to the directory you downloaded,

@@ -473,8 +473,8 @@ Appendix B - Installing Heimdall from Source:
     3. Enter the following commands to compile libpit:

 

             cd libpit

-            ./configure
-            make
+            ./configure

+            make

             cd ..

 

        If you have problems please consult http://www.libusb.org/

@@ -496,11 +496,11 @@ Appendix B - Installing Heimdall from Source:
             sudo make install

             cd ..

 

-       NOTE: As an alternative to "sudo make install" you may chose to generate
-             a package by typing the following:
-
-                sudo checkinstall --pkgversion <version>
-
+       NOTE: As an alternative to "sudo make install" you may chose to generate

+             a package by typing the following:

+

+                sudo checkinstall --pkgversion <version>

+

              Where <version> is the current Heimdall release e.g. 1.3.0

 

     5. Done

@@ -522,7 +522,7 @@ Appendix C - Installing Heimdall Frontend from Source:
             cd heimdall-frontend

             qmake-qt4 heimdall-frontend.pro

             make

-            sudo make install
+            sudo make install

 

        NOTE: As an alternative to "sudo make install" you may chose to generate

              a package by typing the following:

diff --git a/OSX/README.txt b/OSX/README.txt
index 3f27a04..deec2a5 100644
--- a/OSX/README.txt
+++ b/OSX/README.txt
@@ -477,8 +477,8 @@ Appendix B - Installing Heimdall from Source:
 

     3. Download, compile and install libusb-1.0:

 

-       http://www.libusb.org/
-
+       http://www.libusb.org/

+

        NOTE: Alternatively you may install Macport's libusb-devel package.

 

     4. Enter the following commands to compile libpit.

diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README
index a181796..a0ca91e 100644
--- a/heimdall-frontend/doc-pak/README
+++ b/heimdall-frontend/doc-pak/README
@@ -84,11 +84,11 @@ Performing a Custom Flash with Heimdall Frontend:
     This is the advanced means of flashing firmware to your device.

 

     If you're not an advanced user or a developer, in the event that a Heimdall

-    Firmware Package doesn't exist for the particular firmware (or files) that
-    you wish to flash, then I strongly recommend you get in touch with the
-    developer of the firmware (or files) and politely ask them to create a
-    Heimdall Firmware Package for you. In doing so, you avoid the risk of
-    making mistakes due to inexperience.
+    Firmware Package doesn't exist for the particular firmware (or files) that

+    you wish to flash, then I strongly recommend you get in touch with the

+    developer of the firmware (or files) and politely ask them to create a

+    Heimdall Firmware Package for you. In doing so, you avoid the risk of

+    making mistakes due to inexperience.

 

 

     If you're looking to customise an existing Heimdall Firmware Package then

@@ -118,14 +118,14 @@ Performing a Custom Flash with Heimdall Frontend:
     5. Before you can chose which partitions you want to flash with particular

        files you MUST first select a PIT file. To do this click the "Browse"

        button in the "PIT" section. This will open a dialogue allowing you to

-       navigate to and select a valid PIT (.pit) file.
+       navigate to and select a valid PIT (.pit) file.

 

-       If you do not already have a valid PIT file stored on your computer you
-       can download your device's PIT file from the "Utilities" tab.
-
-    6. If a valid PIT file has been selected then the "Add" button below the
-       "Partitions (Files)" list-box will be enabled. Press this button to add
-       a partition to your flash.
+       If you do not already have a valid PIT file stored on your computer you

+       can download your device's PIT file from the "Utilities" tab.

+

+    6. If a valid PIT file has been selected then the "Add" button below the

+       "Partitions (Files)" list-box will be enabled. Press this button to add

+       a partition to your flash.

 

     7. When you first add a partition you will see the "Partition Name" and

        "Partition ID" be populated with information. Use the "Partition Name"

@@ -255,11 +255,11 @@ How to Create a Heimdall Firmware Package:
         Firmware Name - This is the name of your particular firmware. An

             example would be "Cyanogenmod".

 

-        Firmware Version - This is the version identifier for your package. Any
-            valid string will be accepted, although the inclusion of decimal
-            point version number is preferred i.e. "7.1". If it makes sense
-            then feel free to append a text string like "RC1" or "Beta 1" to
-            the decimal point version.
+        Firmware Version - This is the version identifier for your package. Any

+            valid string will be accepted, although the inclusion of decimal

+            point version number is preferred i.e. "7.1". If it makes sense

+            then feel free to append a text string like "RC1" or "Beta 1" to

+            the decimal point version.

 

         Platform Name - This is the name of platform (or operating system) that

             your firmware is based on. In most cases this will simply be

@@ -296,8 +296,8 @@ How to Create a Heimdall Firmware Package:
             team name. Click "Add" and the developer will be added to the list

             on the right. If you make a mistake you can select a developer from

             the list and click "Remove". You can list as many developers as you

-            like, however visual constraints of the "Load Package" tab means
-            only a few names will be visible. Where possible you may want to
+            like, however visual constraints of the "Load Package" tab means

+            only a few names will be visible. Where possible you may want to

             opt for team names over listing individual team members.

 

 

@@ -360,8 +360,8 @@ for the format in their own software.
 

 

 All Heimdall Firmware Packages must contain a file called firmware.xml. This

-file stores flash information and meta-data for the package as well as
-information about other files contained within the package.
+file stores flash information and meta-data for the package as well as

+information about other files contained within the package.

 

 

 The format is fairly straight-forward so it won't be explained in great detail.

@@ -462,9 +462,9 @@ be included.
 

 Appendix B - Installing Heimdall from Source:

 

-    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and
-       libusb-1.0-dev (v1.0.8 or newer).
-
+    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and

+       libusb-1.0-dev (v1.0.8 or newer).

+

        NOTE: Package names may not be absolutely identical to those above.

 

     2. Open a terminal and navigate to the directory you downloaded,

@@ -473,8 +473,8 @@ Appendix B - Installing Heimdall from Source:
     3. Enter the following commands to compile libpit:

 

             cd libpit

-            ./configure
-            make
+            ./configure

+            make

             cd ..

 

        If you have problems please consult http://www.libusb.org/

@@ -496,11 +496,11 @@ Appendix B - Installing Heimdall from Source:
             sudo make install

             cd ..

 

-       NOTE: As an alternative to "sudo make install" you may chose to generate
-             a package by typing the following:
-
-                sudo checkinstall --pkgversion <version>
-
+       NOTE: As an alternative to "sudo make install" you may chose to generate

+             a package by typing the following:

+

+                sudo checkinstall --pkgversion <version>

+

              Where <version> is the current Heimdall release e.g. 1.3.0

 

     5. Done

@@ -522,7 +522,7 @@ Appendix C - Installing Heimdall Frontend from Source:
             cd heimdall-frontend

             qmake-qt4 heimdall-frontend.pro

             make

-            sudo make install
+            sudo make install

 

        NOTE: As an alternative to "sudo make install" you may chose to generate

              a package by typing the following:

diff --git a/heimdall/doc-pak/README b/heimdall/doc-pak/README
index a181796..a0ca91e 100644
--- a/heimdall/doc-pak/README
+++ b/heimdall/doc-pak/README
@@ -84,11 +84,11 @@ Performing a Custom Flash with Heimdall Frontend:
     This is the advanced means of flashing firmware to your device.

 

     If you're not an advanced user or a developer, in the event that a Heimdall

-    Firmware Package doesn't exist for the particular firmware (or files) that
-    you wish to flash, then I strongly recommend you get in touch with the
-    developer of the firmware (or files) and politely ask them to create a
-    Heimdall Firmware Package for you. In doing so, you avoid the risk of
-    making mistakes due to inexperience.
+    Firmware Package doesn't exist for the particular firmware (or files) that

+    you wish to flash, then I strongly recommend you get in touch with the

+    developer of the firmware (or files) and politely ask them to create a

+    Heimdall Firmware Package for you. In doing so, you avoid the risk of

+    making mistakes due to inexperience.

 

 

     If you're looking to customise an existing Heimdall Firmware Package then

@@ -118,14 +118,14 @@ Performing a Custom Flash with Heimdall Frontend:
     5. Before you can chose which partitions you want to flash with particular

        files you MUST first select a PIT file. To do this click the "Browse"

        button in the "PIT" section. This will open a dialogue allowing you to

-       navigate to and select a valid PIT (.pit) file.
+       navigate to and select a valid PIT (.pit) file.

 

-       If you do not already have a valid PIT file stored on your computer you
-       can download your device's PIT file from the "Utilities" tab.
-
-    6. If a valid PIT file has been selected then the "Add" button below the
-       "Partitions (Files)" list-box will be enabled. Press this button to add
-       a partition to your flash.
+       If you do not already have a valid PIT file stored on your computer you

+       can download your device's PIT file from the "Utilities" tab.

+

+    6. If a valid PIT file has been selected then the "Add" button below the

+       "Partitions (Files)" list-box will be enabled. Press this button to add

+       a partition to your flash.

 

     7. When you first add a partition you will see the "Partition Name" and

        "Partition ID" be populated with information. Use the "Partition Name"

@@ -255,11 +255,11 @@ How to Create a Heimdall Firmware Package:
         Firmware Name - This is the name of your particular firmware. An

             example would be "Cyanogenmod".

 

-        Firmware Version - This is the version identifier for your package. Any
-            valid string will be accepted, although the inclusion of decimal
-            point version number is preferred i.e. "7.1". If it makes sense
-            then feel free to append a text string like "RC1" or "Beta 1" to
-            the decimal point version.
+        Firmware Version - This is the version identifier for your package. Any

+            valid string will be accepted, although the inclusion of decimal

+            point version number is preferred i.e. "7.1". If it makes sense

+            then feel free to append a text string like "RC1" or "Beta 1" to

+            the decimal point version.

 

         Platform Name - This is the name of platform (or operating system) that

             your firmware is based on. In most cases this will simply be

@@ -296,8 +296,8 @@ How to Create a Heimdall Firmware Package:
             team name. Click "Add" and the developer will be added to the list

             on the right. If you make a mistake you can select a developer from

             the list and click "Remove". You can list as many developers as you

-            like, however visual constraints of the "Load Package" tab means
-            only a few names will be visible. Where possible you may want to
+            like, however visual constraints of the "Load Package" tab means

+            only a few names will be visible. Where possible you may want to

             opt for team names over listing individual team members.

 

 

@@ -360,8 +360,8 @@ for the format in their own software.
 

 

 All Heimdall Firmware Packages must contain a file called firmware.xml. This

-file stores flash information and meta-data for the package as well as
-information about other files contained within the package.
+file stores flash information and meta-data for the package as well as

+information about other files contained within the package.

 

 

 The format is fairly straight-forward so it won't be explained in great detail.

@@ -462,9 +462,9 @@ be included.
 

 Appendix B - Installing Heimdall from Source:

 

-    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and
-       libusb-1.0-dev (v1.0.8 or newer).
-
+    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and

+       libusb-1.0-dev (v1.0.8 or newer).

+

        NOTE: Package names may not be absolutely identical to those above.

 

     2. Open a terminal and navigate to the directory you downloaded,

@@ -473,8 +473,8 @@ Appendix B - Installing Heimdall from Source:
     3. Enter the following commands to compile libpit:

 

             cd libpit

-            ./configure
-            make
+            ./configure

+            make

             cd ..

 

        If you have problems please consult http://www.libusb.org/

@@ -496,11 +496,11 @@ Appendix B - Installing Heimdall from Source:
             sudo make install

             cd ..

 

-       NOTE: As an alternative to "sudo make install" you may chose to generate
-             a package by typing the following:
-
-                sudo checkinstall --pkgversion <version>
-
+       NOTE: As an alternative to "sudo make install" you may chose to generate

+             a package by typing the following:

+

+                sudo checkinstall --pkgversion <version>

+

              Where <version> is the current Heimdall release e.g. 1.3.0

 

     5. Done

@@ -522,7 +522,7 @@ Appendix C - Installing Heimdall Frontend from Source:
             cd heimdall-frontend

             qmake-qt4 heimdall-frontend.pro

             make

-            sudo make install
+            sudo make install

 

        NOTE: As an alternative to "sudo make install" you may chose to generate

              a package by typing the following: