1 files changed, 38 insertions, 24 deletions
diff --git a/Win32/README.txt b/Win32/README.txt
index ee4063a..2214497 100644
--- a/Win32/README.txt
+++ b/Win32/README.txt
@@ -1,4 +1,4 @@
-Heimdall (c) 2010-2011 Benjamin Dobell, Glass Echidna
+Heimdall (c) 2010-2013 Benjamin Dobell, Glass Echidna
 http://www.glassechidna.com.au/products/heimdall/
 
 DISCLAIMER:
@@ -11,28 +11,29 @@ DISCLAIMER:
     for the result of your actions.
 
 
-These instructions were written for Windows Vista / Server 2008 however the
+These instructions were written for Windows 7 / Vista / Server 2008 however the
 producedure should be essentially the same for all supported versions of
 Windows (XP onwards).
 
 
 Troubleshooting:
 
-    1. If you get an error as follows:
+    1. If when you try launch Heimdall or Heimdall Frontend you receive a
+       similar to:
 
-            The program can't start because MSVCP100.dll is missing from your
+            The program can't start because MSVCP110.dll is missing from your
             computer.
 
-       This means that you haven't installed the Microsoft Visual C++ 2010
+       This means that you haven't installed the Microsoft Visual C++ 2012
        runtimes. The runtimes can be downloaded from Microsoft's website:
 
-            http://www.microsoft.com/download/en/details.aspx?id=5555
+            http://www.microsoft.com/en-au/download/details.aspx?id=30679
 
 
 
 Driver Installation Instructions:
 
-    1. Put your Samsung Galaxy S into download mode and plug it in.
+    1. Put your device into download mode and plug it in.
 
     2. Run zadig.exe included in the Drivers subdirectory.
 
@@ -50,7 +51,7 @@ Driver Installation Instructions:
 
 Driver Uninstallation Instructions:
 
-    1. Put your Samsung Galaxy S into download mode by holding Volume Down + Home + Power.
+    1. Put your device into download mode by holding Volume Down + Home + Power.
 
     2. Plug your phone into your PC.
 
@@ -151,7 +152,7 @@ Performing a Custom Flash with Heimdall Frontend:
 
     1. Fully charge your device (use the wall charger as it's faster).
 
-    2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package
+    2. Download a decrypted device ROM or a Heimdall Firmware Package
        and extract everything to the one directory.
 
     3. If the ROM is not a Heimdall Firmware Package it may instead be provided
@@ -233,10 +234,10 @@ Performing a Custom Flash with Heimdall Frontend:
 
 
 Flashing Firmware from Command Line:
-	
+
     1. Fully charge your phone (use the wall charger as it's faster).
 
-    2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package
+    2. Download a decrypted device ROM or a Heimdall Firmware Package
        and extract everything to the one directory.
 
     3. If the ROM is not a Heimdall Firmware Package it may instead be provided
@@ -258,17 +259,30 @@ Flashing Firmware from Command Line:
 
             heimdall help
 
-    7. Use the instructions to manually enter a command with all the files you
-       want to flash.
+    7. Before flashing, you must first know the names of the partitions you
+       wish to flash. These can be obtained by executing:
+
+            heimdall print-pit --no-reboot
+
+       The inclusion of --no-reboot ensures the phone will not reboot after PIT
+       file has been downloaded and displayed. After executing a command with
+       the --no-reboot argument, the next command should include the --resume
+       argument.
+
+       NOTE: You can still safely reboot your phone manually (with the power
+             button) after executing --no-reboot commands.
+
+    8. Use the help and print-pit output to construct a command with all the
+       file you want to flash.
 
        Here is an example that does a full flash and repartition on a GT-I9000:
-		
-            heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin
+
+            heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin
 
        NOTE: The above command assumes the files specified are installed in the
              same directory as Heimdall.
 
-    8. Heimdall will display the progress as it flashes so that you know things
+    9. Heimdall will display the progress as it flashes so that you know things
        are working as they should.
 
 
@@ -518,20 +532,20 @@ be included.
 
 Appendix B - Installing Heimdall Suite from Source
 
-    1. Ensure that you have both a version of Visual Studio 2010 with C++
-       support and Qt Developer Framework 4.7 (or newer) installed on your
-       system.
+    1. Ensure that you have both a version of Visual Studio 2012 with C++
+       support and Qt Developer Framework (4.7 or later, but prior to 5.0)
+       installed on your system.
 
-       A free version (Visual C++ 2010 Express) can be downloaded from
+       A free version (Visual C++ 2012 Express) can be downloaded from
        Microsoft's website:
 
-          http://www.microsoft.com/visualstudio/en-us/products/2010-editions/visual-cpp-express
+          http://www.microsoft.com/visualstudio/eng/products/visual-studio-express-products
 
-       Qt can also be downloaded freely from Nokia's website:
+       Qt can also be downloaded freely from:
 
-          http://qt.nokia.com/downloads/
+          http://qt-project.org/downloads
 
-    2. Open Heimdall/msvc2010.sln
+    2. Open msvc2012.sln
 
     3. From the Solutions Configuration drop-down change from "Debug" to
        "Release".