From 0767cff62425ff7b90775e57902e90db8ca09200 Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Fri, 21 Jun 2013 01:36:44 +1000 Subject: autogen'd for 1.4.1 --- heimdall/depcomp | 453 +++++++++++++++++++++++-------------------------------- 1 file changed, 185 insertions(+), 268 deletions(-) (limited to 'heimdall/depcomp') diff --git a/heimdall/depcomp b/heimdall/depcomp index 06b0882..debb6ff 100755 --- a/heimdall/depcomp +++ b/heimdall/depcomp @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2012-10-18.11; # UTC +scriptversion=2012-03-27.16; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2012 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -27,9 +27,9 @@ scriptversion=2012-10-18.11; # UTC case $1 in '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] @@ -56,65 +56,11 @@ EOF ;; esac -# Get the directory component of the given path, and save it in the -# global variables '$dir'. Note that this directory component will -# be either empty or ending with a '/' character. This is deliberate. -set_dir_from () -{ - case $1 in - */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; - *) dir=;; - esac -} - -# Get the suffix-stripped basename of the given path, and save it the -# global variable '$base'. -set_base_from () -{ - base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` -} - -# If no dependency file was actually created by the compiler invocation, -# we still have to create a dummy depfile, to avoid errors with the -# Makefile "include basename.Plo" scheme. -make_dummy_depfile () -{ - echo "#dummy" > "$depfile" -} - -# Factor out some common post-processing of the generated depfile. -# Requires the auxiliary global variable '$tmpdepfile' to be set. -aix_post_process_depfile () -{ - # If the compiler actually managed to produce a dependency file, - # post-process it. - if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependency.h'. - # Do two passes, one to just change these to - # $object: dependency.h - # and one to simply output - # dependency.h: - # which is needed to avoid the deleted-header problem. - { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" - sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" - } > "$depfile" - rm -f "$tmpdepfile" - else - make_dummy_depfile - fi -} - # A tabulation character. tab=' ' # A newline character. nl=' ' -# Character ranges might be problematic outside the C locale. -# These definitions help. -upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ -lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 -alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 @@ -128,9 +74,6 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" -# Avoid interferences from the environment. -gccflag= dashmflag= - # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case @@ -142,32 +85,32 @@ if test "$depmode" = hp; then fi if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 fi if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. - gccflag=-qmakedep=gcc,-MF - depmode=gcc + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. + gccflag=-qmakedep=gcc,-MF + depmode=gcc fi case "$depmode" in @@ -190,7 +133,8 @@ gcc3) done "$@" stat=$? - if test $stat -ne 0; then + if test $stat -eq 0; then : + else rm -f "$tmpdepfile" exit $stat fi @@ -198,17 +142,13 @@ gcc3) ;; gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. -## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). Also, it might not be -## supported by the other compilers which use the 'gcc' depmode. +## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then @@ -216,14 +156,15 @@ gcc) fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? - if test $stat -ne 0; then + if test $stat -eq 0; then : + else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" - # The second -e expression handles DOS-style file names with drive - # letters. + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. @@ -232,15 +173,15 @@ gcc) ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. + tr ' ' "$nl" < "$tmpdepfile" | ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -258,7 +199,8 @@ sgi) "$@" -MDupdate "$tmpdepfile" fi stat=$? - if test $stat -ne 0; then + if test $stat -eq 0; then : + else rm -f "$tmpdepfile" exit $stat fi @@ -266,6 +208,7 @@ sgi) if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" + # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in @@ -273,15 +216,19 @@ sgi) # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ - | tr "$nl" ' ' >> "$depfile" + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr "$nl" ' ' >> "$depfile" echo >> "$depfile" + # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" else - make_dummy_depfile + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; @@ -299,8 +246,9 @@ aix) # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - set_dir_from "$object" - set_base_from "$object" + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u @@ -313,7 +261,9 @@ aix) "$@" -M fi stat=$? - if test $stat -ne 0; then + + if test $stat -eq 0; then : + else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi @@ -322,113 +272,65 @@ aix) do test -f "$tmpdepfile" && break done - aix_post_process_depfile - ;; - -tcc) - # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 - # FIXME: That version still under development at the moment of writing. - # Make that this statement remains true also for stable, released - # versions. - # It will wrap lines (doesn't matter whether long or short) with a - # trailing '\', as in: - # - # foo.o : \ - # foo.c \ - # foo.h \ - # - # It will put a trailing '\' even on the last line, and will use leading - # spaces rather than leading tabs (at least since its commit 0394caf7 - # "Emit spaces for -MD"). - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependent.h'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" fi - rm -f "$depfile" - # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. - # We have to change lines of the first kind to '$object: \'. - sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" - # And for each line of the second kind, we have to emit a 'dep.h:' - # dummy dependency, to avoid the deleted-header problem. - sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; -## The order of this option in the case statement is important, since the -## shell code in configure will try each of these formats in the order -## listed in this file. A plain '-MD' option would be understood by many -## compilers, so we must ensure this comes after the gcc and icc options. -pgcc) - # Portland's C compiler understands '-MD'. - # Will always output deps to 'file.d' where file is the root name of the - # source file under compilation, even if file resides in a subdirectory. - # The object file name does not affect the name of the '.d' file. - # pgcc 10.2 will output +icc) + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\' : + # and will wrap long lines using '\': # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... - set_dir_from "$object" - # Use the source, not the object, to determine the base name, since - # that's sadly what pgcc will do too. - set_base_from "$source" - tmpdepfile=$base.d - - # For projects that build the same source file twice into different object - # files, the pgcc approach of using the *source* file root name can cause - # problems in parallel builds. Use a locking strategy to avoid stomping on - # the same $tmpdepfile. - lockdir=$base.d-lock - trap " - echo '$0: caught signal, cleaning up...' >&2 - rmdir '$lockdir' - exit 1 - " 1 2 13 15 - numtries=100 - i=$numtries - while test $i -gt 0; do - # mkdir is a portable test-and-set. - if mkdir "$lockdir" 2>/dev/null; then - # This process acquired the lock. - "$@" -MD - stat=$? - # Release the lock. - rmdir "$lockdir" - break - else - # If the lock is being held by a different process, wait - # until the winning process is done or we timeout. - while test -d "$lockdir" && test $i -gt 0; do - sleep 1 - i=`expr $i - 1` - done - fi - i=`expr $i - 1` - done - trap - 1 2 13 15 - if test $i -le 0; then - echo "$0: failed to acquire lock after $numtries attempts" >&2 - echo "$0: check lockdir '$lockdir'" >&2 - exit 1 - fi - - if test $stat -ne 0; then + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ - | sed -e 's/$/ :/' >> "$depfile" + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; @@ -439,8 +341,9 @@ hp2) # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. - set_dir_from "$object" - set_base_from "$object" + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d @@ -451,7 +354,8 @@ hp2) "$@" +Maked fi stat=$? - if test $stat -ne 0; then + if test $stat -eq 0; then : + else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi @@ -461,61 +365,76 @@ hp2) test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" else - make_dummy_depfile + echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. - # Subdirectories are respected. - set_dir_from "$object" - set_base_from "$object" - - if test "$libtool" = yes; then - # Libtool generates 2 separate objects for the 2 libraries. These - # two compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir$base.o.d # libtool 1.5 - tmpdepfile2=$dir.libs/$base.o.d # Likewise. - tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - # Same post-processing that is required for AIX mode. - aix_post_process_depfile - ;; + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; msvc7) if test "$libtool" = yes; then @@ -526,7 +445,8 @@ msvc7) "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" - if test $stat -ne 0; then + if test "$stat" = 0; then : + else rm -f "$tmpdepfile" exit $stat fi @@ -603,14 +523,13 @@ dashmstdout) # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | - sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this sed invocation - # correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" + tr ' ' "$nl" < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -663,12 +582,10 @@ makedepend) # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process the last invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed '1,2d' "$tmpdepfile" \ - | tr ' ' "$nl" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; @@ -704,10 +621,10 @@ cpp) esac done - "$@" -E \ - | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - | sed '$ s: \\$::' > "$tmpdepfile" + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" @@ -739,15 +656,15 @@ msvisualcpp) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; + set fnord "$@" + shift + shift + ;; *) - set fnord "$@" "$arg" - shift - shift - ;; + set fnord "$@" "$arg" + shift + shift + ;; esac done "$@" -E 2>/dev/null | -- cgit v1.1 From fbebc394f441e35e4777868627b4d2d1ec349a6b Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Sun, 1 Jun 2014 14:49:56 +1000 Subject: Autogen'd files for Heimdall 1.4.1 --- heimdall/depcomp | 125 +++++++++++++++++++++++-------------------------------- 1 file changed, 53 insertions(+), 72 deletions(-) (limited to 'heimdall/depcomp') diff --git a/heimdall/depcomp b/heimdall/depcomp index debb6ff..bd0ac08 100755 --- a/heimdall/depcomp +++ b/heimdall/depcomp @@ -1,9 +1,10 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2012-03-27.16; # UTC +scriptversion=2011-12-04.11; # UTC -# Copyright (C) 1999-2012 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, +# 2011 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -27,7 +28,7 @@ scriptversion=2012-03-27.16; # UTC case $1 in '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) @@ -39,8 +40,8 @@ as side-effects. Environment variables: depmode Dependency tracking mode. - source Source file read by 'PROGRAMS ARGS'. - object Object file output by 'PROGRAMS ARGS'. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. @@ -56,12 +57,6 @@ EOF ;; esac -# A tabulation character. -tab=' ' -# A newline character. -nl=' -' - if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 @@ -107,12 +102,6 @@ if test "$depmode" = msvc7msys; then depmode=msvc7 fi -if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. - gccflag=-qmakedep=gcc,-MF - depmode=gcc -fi - case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what @@ -167,14 +156,15 @@ gcc) ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the "deleted header file" problem. +## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. - tr ' ' "$nl" < "$tmpdepfile" | -## Some versions of gcc put a space before the ':'. On the theory + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. @@ -213,15 +203,18 @@ sgi) # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like '#:fec' to the end of the + # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. - tr ' ' "$nl" < "$tmpdepfile" \ + tr ' ' ' +' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr "$nl" ' ' >> "$depfile" + tr ' +' ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. - tr ' ' "$nl" < "$tmpdepfile" \ + tr ' ' ' +' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else @@ -233,17 +226,10 @@ sgi) rm -f "$tmpdepfile" ;; -xlc) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts '$object:' at the + # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` @@ -273,11 +259,12 @@ aix) test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependent.h'. + # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to - # '$object: dependent.h' and one to simply 'dependent.h:'. + # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -288,26 +275,23 @@ aix) ;; icc) - # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. - # However on - # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h - # which is wrong. We want + # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\': + # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... - # tcc 0.9.26 (FIXME still under development at the moment of writing) - # will emit a similar output, but also prepend the continuation lines - # with horizontal tabulation characters. + "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : @@ -316,21 +300,15 @@ icc) exit $stat fi rm -f "$depfile" - # Each line is of the form 'foo.o: dependent.h', - # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to - # '$object: dependent.h' and one to simply 'dependent.h:'. - sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ - < "$tmpdepfile" > "$depfile" - sed ' - s/[ '"$tab"'][ '"$tab"']*/ /g - s/^ *// - s/ *\\*$// - s/^[^:]*: *// - /^$/d - /:$/d - s/$/ :/ - ' < "$tmpdepfile" >> "$depfile" + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -366,7 +344,7 @@ hp2) done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add 'dependent.h:' lines. + # Add `dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// @@ -381,9 +359,9 @@ hp2) tru64) # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. + # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= @@ -429,7 +407,8 @@ tru64) done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi @@ -464,11 +443,11 @@ msvc7) p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g -s/\(.*\)/'"$tab"'\1 \\/p +s/\(.*\)/ \1 \\/p s/.\(.*\) \\/\1:/ H $ { - s/.*/'"$tab"'/ + s/.*/ / G p }' >> "$depfile" @@ -499,7 +478,7 @@ dashmstdout) shift fi - # Remove '-o $object'. + # Remove `-o $object'. IFS=" " for arg do @@ -519,14 +498,15 @@ dashmstdout) done test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for ':' + # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: - # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | - sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - tr ' ' "$nl" < "$tmpdepfile" | \ + tr ' ' ' +' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" @@ -582,7 +562,8 @@ makedepend) # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" @@ -602,7 +583,7 @@ cpp) shift fi - # Remove '-o $object'. + # Remove `-o $object'. IFS=" " for arg do @@ -671,8 +652,8 @@ msvisualcpp) sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" - echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; -- cgit v1.1 From b22ae7b89f7993f632e10e18c116f293f314575f Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Thu, 19 Feb 2015 03:13:56 +1100 Subject: Removed autotools and VS files, and standardised source dir naming --- heimdall/depcomp | 688 ------------------------------------------------------- 1 file changed, 688 deletions(-) delete mode 100755 heimdall/depcomp (limited to 'heimdall/depcomp') diff --git a/heimdall/depcomp b/heimdall/depcomp deleted file mode 100755 index bd0ac08..0000000 --- a/heimdall/depcomp +++ /dev/null @@ -1,688 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2011-12-04.11; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, -# 2011 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" - echo >> "$depfile" - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test "$stat" = 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/ \1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/ / - G - p -}' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: -- cgit v1.1