From 4d71b6611e9281c999f34712bfd014cc3c95ef3f Mon Sep 17 00:00:00 2001 From: Reid Spencer Date: Fri, 22 Oct 2004 21:01:56 +0000 Subject: Shorten the rules, speed it up, correct library contruction, add *.td rules git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17166 91177308-0d34-0410-b5e6-96231b3b80d8 --- Makefile.rules | 960 +++++++++++++++++++++++++-------------------------------- 1 file changed, 421 insertions(+), 539 deletions(-) diff --git a/Makefile.rules b/Makefile.rules index bd89987..8c24bbb 100644 --- a/Makefile.rules +++ b/Makefile.rules @@ -31,11 +31,7 @@ # 4. Source - If specified, this sets the source code filenames. If this # is not set, it defaults to be all of the .cpp, .c, .y, and .l files # in the current directory. Also, if you want to build files in addition -# to the local files, you can use the ExtraSource variable -# -# 5. SourceDir - If specified, this specifies a directory that the source files -# are in, if they are not in the current directory. This should include a -# trailing / character. +# to the local files, you can use the BUILT_SOURCES variable # # 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree. # @@ -57,7 +53,7 @@ # # Set the VPATH so that we can find source files. # -VPATH=$(SourceDir) +VPATH=$(BUILD_SRC_DIR) ########################################################################### # Default Targets: @@ -65,45 +61,20 @@ VPATH=$(SourceDir) # building. ########################################################################### -# Ensure people re-run configure when it gets updated -all::$(LLVM_OBJ_ROOT)/config.status - -ifdef SHARED_LIBRARY -# if SHARED_LIBRARY is specified, the default is to build the dynamic lib -all:: dynamic -install:: install-dynamic-library -endif - -ifdef BYTECODE_LIBRARY -# if BYTECODE_LIBRARY is specified, the default is to build the bytecode lib -all:: bytecodelib -install:: install-bytecode-library -install-bytecode:: install-bytecode-library -endif -# Default Rule: Make sure it's also a :: rule -all :: +# Ensure all preconditions are met +all:: preconditions -# Default for install is to at least build everything... -install :: +# Make sure all the user-target rules are double colon rules +all :: preconditions +clean:: preconditions +install :: preconditions +uninstall :: preconditions +check:: preconditions +dist:: preconditions +distcheck:: preconditions +distclean:: preconditions -# Default rule for test. It ensures everything has a test rule -test:: - -# Default rule for building only bytecode. -bytecode:: - -# Default rule for installing only bytecode. -install-bytecode:: - -# Print out the directories used for building -prdirs:: - @${ECHO} "Build Source Root: " $(BUILD_SRC_ROOT) - @${ECHO} "Build Source Dir : " $(BUILD_SRC_DIR) - @${ECHO} "Build Object Root: " $(BUILD_OBJ_ROOT) - @${ECHO} "Build Object Dir : " $(BUILD_OBJ_DIR) - @${ECHO} "LLVM Source Root: " $(LLVM_SRC_ROOT) - @${ECHO} "LLVM Object Root: " $(LLVM_OBJ_ROOT) ########################################################################### # Suffixes and implicit rules: @@ -121,8 +92,8 @@ prdirs:: # slightly since GNU Make will not try to find implicit rules for targets # which are marked as Phony. # -.PHONY: all dynamic bytecodelib install-bytecode-library -.PHONY: clean distclean install test bytecode prdirs +ALL_TARGETS= all dynamic bytecodelib install-bytecode-library clean distclean install test bytecode prdirs +.PHONY: $(ALL_TARGETS) preconditions ########################################################################### # Miscellaneous paths and commands: @@ -134,287 +105,153 @@ prdirs:: # Variables derived from configuration options... #-------------------------------------------------------------------- -BURG_OPTS = -I - ifdef ENABLE_PROFILING - ENABLE_OPTIMIZED = 1 CONFIGURATION := Profile + CXXFLAGS += -O3 -DNDEBUG -felide-constructors -finline-functions -pg + CFLAGS += -O3 -DNDEBUG -pg + LDFLAGS += -O3 -DNDEBUG -pg else ifdef ENABLE_OPTIMIZED CONFIGURATION := Release + CXXFLAGS += -O3 -DNDEBUG -finline-functions -felide-constructors -fomit-frame-pointer + CFLAGS += -O3 -DNDEBUG -fomit-frame-pointer + LDFLAGS += -O3 -DNDEBUG else CONFIGURATION := Debug + CXXFLAGS += -g -D_DEBUG + CFLAGS += -g -D_DEBUG + LDFLAGS += -g -D_DEBUG + KEEP_SYMBOLS := 1 endif endif -# -# Enable this for profiling support with 'gprof' -# This automatically enables optimized builds. -# -ifdef ENABLE_PROFILING - PROFILE = -pg -endif - -########################################################################### -# Library Locations: -# These variables describe various library locations: -# -# DEST* = Location of where libraries that are built will be placed. -# LLVM* = Location of LLVM libraries used for linking. -# PROJ* = Location of previously built libraries used for linking. -########################################################################### - -# Libraries that are being built -DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug -DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release -DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile -DESTLIBBYTECODE := $(BUILD_OBJ_ROOT)/lib/BytecodeLibs -DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) - -# LLVM libraries used for linking -LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug -LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release -LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile -LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION) - -# Libraries that were built that will now be used for linking -PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug -PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release -PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile -PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) - -########################################################################### -# Tool Locations -# These variables describe various tool locations: -# -# DEST* = Location of where tools that are built will be placed. -# LLVM* = Location of LLVM tools used for building. -# PROJ* = Location of previously built tools used for linking. -########################################################################### - -DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug -DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release -DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile -DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) +ARFLAGS := cru +#------------------------------------------------------------------------------ +# Directory locations +OBJDIR := $(BUILD_OBJ_DIR)/$(CONFIGURATION) +LIBDIR := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) +TOOLDIR := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) +LLVMLIBDIR := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION) +LLVMTOOLDIR := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION) + +#------------------------------------------------------------------------------ +# Full Paths To Compiled Tools and Utilities +LIBTOOL := $(LLVM_OBJ_ROOT)/mklib +LLVMAS := $(LLVMTOOLDIR)/llvm-as$(EXEEXT) +BURG := $(LLVMTOOLDIR)/burg$(EXEEXT) +TBLGEN := $(LLVMTOOLDIR)/tblgen$(EXEEXT) +GCCLD := $(LLVMTOOLDIR)/gccld$(EXEEXT) +LLVMGCC := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/gcc +LLVMGXX := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/g++ + +# Need a better way to compute this. +LLVMGCCLIBDIR := $(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a))/ + +#------------------------------------------------------------------------------ +# Adjust to user's request -LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug -LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release -LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile -LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION) - -PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug -PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release -PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile -PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) - -# -# Libtool is found in the current directory. -# -LIBTOOL := $(LLVM_OBJ_ROOT)/mklib - -# -# If we're not building a shared library, use the disable-shared tag with -# libtool. This will disable the building of objects for shared libraries and -# only generate static library objects. -# -# For dynamic libraries, we'll take the performance hit for now, since we -# almost never build them. -# -# This should speed up compilation and require no modifications to future -# versions of libtool. -# ifndef SHARED_LIBRARY -LIBTOOL += --tag=disable-shared + LIBTOOL += --tag=disable-shared +else + LDFLAGS += -rpath $(LIBDIR) endif # # Verbosity levels # ifndef VERBOSE -VERB := @ -LIBTOOL += --silent + VERB := @ + LIBTOOL += --silent + AR += >/dev/null 2>/dev/null endif -########################################################################### -# Miscellaneous paths and commands (part deux): -# This section defines various configuration macros, such as where -# to find burg, tblgen, and libtool. -########################################################################### - -#-------------------------------------------------------------------------- -# Utilities used while building the LLVM tree, which live in the utils dir -# -BURG := $(LLVMTOOLCURRENT)/burg$(EXEEXT) -RunBurg := $(BURG) $(BURG_OPTS) -TBLGEN := $(LLVMTOOLCURRENT)/tblgen$(EXEEXT) -LGCCLDPROG := $(LLVMTOOLCURRENT)/gccld$(EXEEXT) - -#-------------------------------------------------------------------------- -# The LLVM GCC front-end in C and C++ flavors -# -LLVMGCC := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/gcc -LLVMGXX := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/g++ - -#-------------------------------------------------------------------------- -# The compiled LLVM tools -# - -LLVMAS := $(LLVMTOOLCURRENT)/llvm-as$(EXEEXT) -# Find the location of the platform specific LLVM GCC libraries -LLVMGCCLIBDIR=$(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a)) -# LLVM Tool Definitions (LLVMGCC, LLVMGXX, LLVMAS are provided by -# Makefile.rules) -LLI = $(LLVMTOOLCURRENT)/lli$(EXEEXT) -LLC = $(LLVMTOOLCURRENT)/llc$(EXEEXT) -LGCCAS = $(LLVMTOOLCURRENT)/gccas$(EXEEXT) -LGCCLD = $(LGCCLDPROG) -L$(LLVMGCCLIBDIR) -L$(LLVMGCCDIR)/lib -LDIS = $(LLVMTOOLCURRENT)/llvm-dis$(EXEEXT) -LOPT = $(LLVMTOOLCURRENT)/opt$(EXEEXT) -LLINK = $(LLVMTOOLCURRENT)/llvm-link$(EXEEXT) -LPROF = $(LLVMTOOLCURRENT)/llvm-prof$(EXEEXT) -LANALYZE = $(LLVMTOOLCURRENT)/analyze$(EXEEXT) -LBUGPOINT = $(LLVMTOOLCURRENT)/bugpoint$(EXEEXT) -LLVMC = $(LLVMTOOLCURRENT)/llvmc$(EXEEXT) - - -########################################################################### -# Compile Time Flags -########################################################################### - -# -# Include both the project headers and the LLVM headers for compilation and -# dependency computation. -# -# BUILD_OBJ_DIR : Files local to the particular object directory -# (locallly generated header files). -# BUILD_SRC_DIR : Files local to the particular source directory. -# BUILD_SRC_ROOT/include : Files global to the project. -# LLVM_OBJ_ROOT/include : config.h files generated by autoconf -# LEVEL/include : config.h files for the project -# LLVM_SRC_ROOT/include : Files global to LLVM. -# -CPPFLAGS += -I$(BUILD_OBJ_DIR) -I$(BUILD_SRC_DIR) -I$(LLVM_OBJ_ROOT)/include \ - -I$(BUILD_SRC_ROOT)/include -I$(LEVEL)/include \ - -I$(LLVM_SRC_ROOT)/include - # By default, strip symbol information from executable ifndef KEEP_SYMBOLS -STRIP = $(PLATFORMSTRIPOPTS) -STRIP_WARN_MSG = "(without symbols)" + STRIP = $(PLATFORMSTRIPOPTS) + STRIP_WARN_MSG = "(without symbols)" endif -# Allow GNU extensions: -CPPFLAGS += -D_GNU_SOURCE -# Pull in limit macros from stdint.h, even in C++: -CPPFLAGS += -D__STDC_LIMIT_MACROS - -CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions - -# -# Compile commands with libtool. -# -Compile := $(LIBTOOL) --tag=CXX --mode=compile $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) -CompileC := $(LIBTOOL) --mode=compile $(CC) -c $(CPPFLAGS) $(CFLAGS) $(CompileCommonOpts) - -# Compile a cpp file, don't link... -CompileG := $(Compile) -g -D_DEBUG -CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer -CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE) - -# Compile a c file, don't link... -CompileCG := $(CompileC) -g -D_DEBUG -CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer -CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE) - -########################################################################### -# Link Time Options -########################################################################### - -# -# Link final executable -# (Note that we always link with the C++ compiler). -# -Link := $(LIBTOOL) --tag=CXX --mode=link $(CXX) - -# link both projlib and llvmlib libraries -LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP) -LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE) -LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE) +ifdef TOOLNAME + LDFLAGS += -rpath $(TOOLDIR) -export-dynamic $(TOOLLINKOPTS) +endif # TOOLLINKOPTSB to pass options to the linker like library search path etc # Note that this is different from TOOLLINKOPTS, these options # are passed to the linker *before* the USEDLIBS options are passed. # e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib ifdef TOOLLINKOPTSB -LinkG := $(LinkG) $(TOOLLINKOPTSB) -LinkO := $(LinkO) $(TOOLLINKOPTSB) -LinkP := $(LinkP) $(TOOLLINKOPTSB) +LDFLAGS += $(TOOLLINKOPTSB) endif -# Create one .o file from a bunch of .o files... -Relink := ${LIBTOOL} --tag=CXX --mode=link $(CXX) +LDFLAGS += -L$(LIBDIR) -L$(LLVMLIBDIR) -# -# Configure where the item being compiled should go. -# -ifdef SHARED_LIBRARY -Link += -rpath $(DESTLIBCURRENT) -endif +#------------------------------------------------------------------------------ +# Options To Invoke Tools -ifdef TOOLNAME -Link += -rpath $(DESTTOOLCURRENT) -endif - -# Create dependency file from CPP file, send to stdout. -Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS) -DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS) +CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -# Archive a bunch of .o files into a .a file... -AR = $(AR_PATH) cr +CPPFLAGS += -I$(BUILD_OBJ_DIR) \ + -I$(BUILD_SRC_DIR) \ + -I$(BUILD_SRC_ROOT)/include \ + -I$(BUILD_OBJ_ROOT)/include \ + -I$(LLVM_OBJ_ROOT)/include \ + -I$(LLVM_SRC_ROOT)/include \ + -D_GNU_SOURCE -D__STDC_LIMIT_MACROS + +CXXCompile := $(CXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c +LTCXXCompile := $(LIBTOOL) --tag=CXX --mode=compile $(CXXCompile) +CCompile := $(CC) $(CPPFLAGS) $(CompileCommonOpts) -c $(CFLAGS) +LTCCompile := $(LIBTOOL) --mode=compile $(CCompile) +BCCXXCompile := $(LLVMGXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c +BCCCompile := $(LLVMGCC) $(CPPFLAGS) $(CompileCommonOpts) $(CFLAGS) -c +Link := $(LIBTOOL) --tag=CXX --mode=link $(CXX) $(CPPFLAGS) $(CompileCommonOpts) $(LDFLAGS) $(STRIP) +Relink := $(LIBTOOL) --tag=CXX --mode=link $(CXX) +BCLinkLib := $(LLVMGCC) -shared -nostdlib +Burg := $(BURG) -I $(BUILD_SRC_DIR) +TableGen := $(TBLGEN) -I $(BUILD_SRC_DIR) +Archive := $(AR) $(ARFLAGS) +ifdef RANLIB +Ranlib := $(RANLIB) +else +Ranlib := ranlib +endif #---------------------------------------------------------- - # Source includes all of the cpp files, and objects are derived from the # source files... -# The local Makefile can list other Source files via ExtraSource = ... +# The local Makefile can list other Source files via BUILT_SOURCES = ... # ifndef Source -Source := $(notdir $(ExtraSource) $(wildcard $(SourceDir)/*.cpp \ - $(SourceDir)/*.cc $(SourceDir)/*.c $(SourceDir)/*.y \ - $(SourceDir)/*.l)) + +Source := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \ + $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \ + $(BUILD_SRC_DIR)/*.l)) +endif + +ifdef BUILT_SOURCES +Source += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES)) endif # # Libtool Objects # Srcs := $(sort $(basename $(Source))) -ObjectsO := $(Srcs:%=$(BUILD_OBJ_DIR)/Release/%.lo) -ObjectsP := $(Srcs:%=$(BUILD_OBJ_DIR)/Profile/%.lo) -ObjectsG := $(Srcs:%=$(BUILD_OBJ_DIR)/Debug/%.lo) -ObjectsBC := $(Srcs:%=$(BUILD_OBJ_DIR)/BytecodeObj/%.bc) - -# -# The real objects underlying the libtool objects -# -RObjs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source))))) -RObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(RObjs)) -RObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(RObjs)) -RObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(RObjs)) +ObjectsO := $(Srcs:%=$(OBJDIR)/%.o) +ObjectsLO := $(Srcs:%=$(OBJDIR)/%.lo) +ObjectsBC := $(Srcs:%=$(OBJDIR)/%.bc) #--------------------------------------------------------- # Handle the DIRS and PARALLEL_DIRS options #--------------------------------------------------------- ifdef DIRS -all install clean test bytecode stripped-bytecode install-bytecode:: - $(VERB) for dir in ${DIRS}; do \ - if [ ! -f $$dir/Makefile ]; \ - then \ - $(MKDIR) $$dir; \ - cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \ - fi; \ - ($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \ +$(ALL_TARGETS):: + $(VERB) for dir in $(DIRS); do \ + if [ ! -f $$dir/Makefile ]; then \ + $(MKDIR) $$dir; \ + cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ + fi; \ + ($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \ done endif @@ -429,27 +266,24 @@ stripped-bytecode :: $(addsuffix /.makestripped-bytecode, $(PARALLEL_DIRS)) install-bytecode :: $(addsuffix /.makeinstall-bytecode, $(PARALLEL_DIRS)) %/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode %/.makestripped-bytecode %/.makeinstall-bytecode: - $(VERB) if [ ! -f $(@D)/Makefile ]; \ - then \ - $(MKDIR) $(@D); \ - cp $(SourceDir)/$(@D)/Makefile $(@D)/Makefile; \ + $(VERB) if [ ! -f $(@D)/Makefile ]; then \ + $(MKDIR) $(@D); \ + cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \ fi; \ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) $(MFLAGS) endif # Handle directories that may or may not exist ifdef OPTIONAL_DIRS -all install clean test bytecode stripped-bytecode install-bytecode:: - $(VERB) for dir in ${OPTIONAL_DIRS}; do \ - if [ -d $(SourceDir)/$$dir ]; \ - then\ - if [ ! -f $$dir/Makefile ]; \ - then \ - $(MKDIR) $$dir; \ - cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \ - fi; \ - ($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \ - fi \ +$(ALL_TARGETS):: + $(VERB) for dir in $(OPTIONAL_DIRS); do \ + if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\ + if [ ! -f $$dir/Makefile ]; then \ + $(MKDIR) $$dir; \ + cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ + fi; \ + ($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \ + fi \ done endif @@ -465,7 +299,7 @@ $(sysconfdir): install-config-files: $(sysconfdir) $(CONFIG_FILES) $(VERB)$(ECHO) Installing Configuration Files To $(sysconfdir) $(VERB)for file in $(CONFIG_FILES); do \ - $(INSTALL) $(SourceDir)/$${file} $(sysconfdir) ; \ + $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \ done endif @@ -499,152 +333,111 @@ ifdef LIBRARYNAME # Make sure there isn't any extranous whitespace on the LIBRARYNAME option LIBRARYNAME := $(strip $(LIBRARYNAME)) +LIBNAME_LA := $(LIBDIR)/lib$(LIBRARYNAME).la +LIBNAME_A := $(LIBDIR)/lib$(LIBRARYNAME).a +LIBNAME_O := $(LIBDIR)/$(LIBRARYNAME).o +LIBNAME_BC := $(LIBDIR)/lib$(LIBRARYNAME).bc -LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).la -LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).la -LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).la -LIBNAME_CUR := $(DESTLIBCURRENT)/lib$(LIBRARYNAME).la -LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a -LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a -LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a -LIBNAME_ACUR := $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a -LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o -LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o -LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o -LIBNAME_OBJCUR := $(DESTLIBCURRENT)/$(LIBRARYNAME).o -LIBNAME_BC := $(DESTLIBBYTECODE)/lib$(LIBRARYNAME).bc - - -#-------------------------------------------------------------------- -# Library Targets +#------------------------------------------------------------------------------- +# Shared Library Targets # Modify the top level targets to build the desired libraries. -#-------------------------------------------------------------------- +#------------------------------------------------------------------------------- -# dynamic target builds a shared object version of the library... -dynamic:: $(LIBNAME_CUR) -bytecodelib:: $(LIBNAME_BC) -install-bytecode-library:: $(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc +# Does the library want a shared library version built? +ifdef SHARED_LIBRARY -$(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) $(DESTDIR)$(bytecode_libdir) - @${ECHO} ======= Installing $(LIBRARYNAME) bytecode library ======= - $(VERB)cp $< $@ +all:: $(LIBNAME_LA) -# Does the library want a .o version built? -ifndef DONT_BUILD_RELINKED -all:: $(LIBNAME_OBJCUR) -install:: install-single-object-library -endif +$(LIBNAME_LA): $(BUILT_SOURCES) $(ObjectsLO) $(LIBDIR)/.dir + @$(ECHO) Linking shared library $(notdir $@) + $(VERB) $(Link) -o $@ $(ObjectsLO) + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(LIBDIR) + @$(ECHO) Finished linking shared library $(LIBRARYNAME).la +clean:: + $(VERB) $(RM) -f $(LIBNAME_LA) -# Does the library want an archive version built? -ifdef BUILD_ARCHIVE -all:: $(LIBNAME_ACUR) -install:: install-archive-library +install:: $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT) + +$(DESTDIR)/lib/lib$(LIBRARYNAME)$(SHLIBEXT): $(LIBNAME_LA) + @$(ECHO) Installing shared library $(notdir $@) + $(VERB) $(MKDIR) $(DESTDIR) + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_LA) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT) + $(VERB) $(LIBTOOL) --finish $(DESTDIR)$(libdir) endif -#-------------------------------------------------------------------- -# Rules for building libraries -#-------------------------------------------------------------------- +# Does the library want a bytecode version built? +ifdef BYTECODE_LIBRARY -LinkBCLib := $(LLVMGCC) -shared -nostdlib ifdef EXPORTED_SYMBOL_LIST -LinkBCLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST) + BCLinkLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST) else ifdef EXPORTED_SYMBOL_FILE -LinkBCLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) + BCLinkLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) else -LinkBCLib += -Xlinker -disable-internalize + BCLinkLib += -Xlinker -disable-internalize endif endif +all:: $(LIBNAME_BC) -# Rule for building bytecode libraries. -$(LIBNAME_BC): $(ObjectsBC) $(LibSubDirs) $(DESTLIBBYTECODE)/.dir - @${ECHO} Linking $(LIBRARYNAME) bytecode library - $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts) - @${ECHO} ======= Finished building $(LIBRARYNAME) bytecode library ======= -# -# Rules for building dynamically linked libraries. -# -$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir - @${ECHO} Linking $(LIBRARYNAME) dynamic release library - $(VERB) $(Link) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT) - @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic release library ======= +$(LIBNAME_BC): $(BUILT_SOURCES) $(ObjectsBC) $(LIBDIR)/.dir + @$(ECHO) Linking bytecode library $(notdir $@) + $(VERB) $(BCLinkLib) -o $@ $(ObjectsBC) -$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir - @${ECHO} Linking $(LIBRARYNAME) dynamic profile library - $(VERB) $(Link) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT) - @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic profile library ======= +clean:: + $(VERB) $(RM) -f $(LIBNAME_BC) -$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir - @${ECHO} Linking $(LIBRARYNAME) dynamic debug library - $(VERB) $(Link) -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT) - @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic debug library ======= +install:: $(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc -install-dynamic-library: $(LIBNAME_CUR) - $(MKDIR) $(DESTDIR)$(libdir) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_CUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT) - $(VERB) $(LIBTOOL) --finish $(DESTDIR)$(libdir) +$(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) $(DESTDIR)$(bytecode_libdir) + @$(ECHO) Installing bytecode library $(notdir $@) + $(VERB)$(INSTALL) $< $@ -# -# Rules for building static archive libraries. -# -$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir - @${ECHO} Linking $(LIBRARYNAME) archive release library - $(VERB)$(RM) -f $@ - $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static - @${ECHO} Finished building $(LIBRARYNAME) archive release library ======= - -$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir - @${ECHO} Linking $(LIBRARYNAME) archive profile library - @$(RM) -f $@ - $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static - @${ECHO} ======= Finished building $(LIBRARYNAME) archive profile library ======= - -$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir - @${ECHO} Linking $(LIBRARYNAME) archive debug library - @$(RM) -f $@ - $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static - @${ECHO} ======= Finished building $(LIBRARYNAME) archive debug library ======= - -install-archive-library: $(LIBNAME_ACUR) - $(MKDIR) $(DESTDIR)$(libdir) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_ACUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a +endif -# -# Rules for building .o libraries. -# -# JTC: -# Note that for this special case, we specify the actual object files -# instead of their libtool counterparts. This is because libtool -# doesn't want to generate a reloadable object file unless it is given -# .o files explicitly. -# -# Note that we're making an assumption here: If we build a .lo file, -# its corresponding .o file will be placed in the same directory. -# -# I think that is safe. -# -$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir - @${ECHO} "Linking `basename $@`" - $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs) +# Does the library want a .o version built? +ifndef DONT_BUILD_RELINKED +all:: $(LIBNAME_O) -$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir - @${ECHO} "Linking `basename $@`" - $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs) +$(LIBNAME_O): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir + @$(ECHO) Linking object $(notdir $@) + $(VERB) $(Relink) -o $@ $(ObjectsO) -$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir - @${ECHO} "Linking `basename $@`" - $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs) +install:: $(DESTDIR)$(libdir)/$(LIBRARYNAME).o -install-single-object-library: $(LIBNAME_OBJCUR) - $(MKDIR) $(DESTDIR)$(libdir) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_OBJCUR) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o +$(DESTDIR)$(libdir)/$(LIBRARYNAME).o: $(LIBNAME_O) + @$(ECHO) Installing object library $(notdir $@) + $(VERB) $(MKDIR) $(DESTDIR)$(libdir) + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_O) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o + +clean:: + $(VERB) $(RM) -f $(LIBNAME_O) + +endif +# Does the library want an archive version built? +ifdef BUILD_ARCHIVE +all:: $(LIBNAME_A) + +$(LIBNAME_A): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir + @$(ECHO) Linking archive $(notdir $@) library + $(VERB)$(RM) -f $@ + $(VERB) $(Archive) $@ $(ObjectsO) + $(VERB) $(Ranlib) $@ + +clean:: + $(VERB) $(RM) -f $(LIBNAME_A) + +install:: $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a + +$(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a: $(LIBNAME_A) + $(MKDIR) $(DESTDIR)$(libdir) + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_A) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a endif +# if LIBRARYNAME +endif + #------------------------------------------------------------------------ # Handle the TOOLNAME option - used when building tool executables... #------------------------------------------------------------------------ @@ -656,135 +449,180 @@ endif # ifdef TOOLNAME -# Handle compression libraries automatically -ifeq ($(HAVE_BZIP2),1) -TOOLLINKOPTS += -lbz2 -endif -ifeq ($(HAVE_ZLIB),1) -TOOLLINKOPTS += -lz +# TOOLLINKOPTSB to pass options to the linker like library search path etc +# Note that this is different from TOOLLINKOPTS, these options +# are passed to the linker *before* the USEDLIBS options are passed. +# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib +ifdef TOOLLINKOPTSB +Link += $(TOOLLINKOPTSB) endif + # TOOLEXENAME* - These compute the output filenames to generate... -TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME) -TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME) -TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME) -TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME) +TOOLEXENAME := $(TOOLDIR)/$(TOOLNAME) # USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc. -PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) -PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS)) -PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) -PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) +PROJ_LIBS_OPTIONS := $(patsubst %.o, $(LIBDIR)/%.o, $(PROJ_LIBS_OPTIONS)) +LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) +LLVM_LIBS_OPTIONS := $(patsubst %.o, $(LLVMLIBDIR)/%.o, $(LLVM_LIBS_OPTIONS)) -LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) -LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS)) -LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) -LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) +PROJ_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) +LLVM_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS))) +PROJ_LIBS_PATHS := $(addprefix $(LIBDIR)/,$(PROJ_USED_LIBS)) +LLVM_LIBS_PATHS := $(addprefix $(LLVMLIBDIR)/,$(LLVM_USED_LIBS)) -LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G) -LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O) -LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P) - -# USED_LIB_PATHS - Compute the path of the libraries used so that tools are -# rebuilt if libraries change. This has to make sure to handle .a/.so and .o -# files separately. -# -STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) -USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS)) - -LLVMSTATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS))) -LLVM_LIB_PATHS_G := $(addprefix $(LLVMLIBDEBUGSOURCE)/, $(LLVMSTATICUSEDLIBS)) -LLVM_LIB_PATHS_O := $(addprefix $(LLVMLIBRELEASESOURCE)/, $(LLVMSTATICUSEDLIBS)) -LLVM_LIB_PATHS_P := $(addprefix $(LLVMLIBPROFILESOURCE)/, $(LLVMSTATICUSEDLIBS)) +LINK_OPTS := $(TOOLLINKOPTS) $(PROJ_LIBS_OPTIONS) $(LLVM_LIBS_OPTIONS) # # Libtool link options: # Ensure that all binaries have their symbols exported so that they can # by dlsym'ed. # -LINK_OPTS := -export-dynamic $(TOOLLINKOPTS) - - - +# Handle compression libraries automatically +ifeq ($(HAVE_BZIP2),1) +LIBS += -lbz2 +endif +ifeq ($(HAVE_ZLIB),1) +LIBS += -lz +endif # Tell make that we need to rebuild subdirectories before we can link the tool. # This affects things like LLI which has library subdirectories. -$(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \ - $(addsuffix /.makeall, $(PARALLEL_DIRS)) +$(LIBS): $(addsuffix /.makeall, $(PARALLEL_DIRS)) -all:: $(TOOLEXENAMES) +all:: $(TOOLEXENAME) clean:: - $(VERB) $(RM) -f $(TOOLEXENAMES) + $(VERB) $(RM) -f $(TOOLEXENAME) + +$(TOOLEXENAME): $(BUILT_SOURCES) $(ObjectsO) $(PROJ_LIBS_PATHS) $(LLVM_LIBS_PATHS) $(TOOLDIR)/.dir + @$(ECHO) Linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG) + $(VERB) $(Link) -o $@ $(ObjectsO) $(PROJ_LIBS_OPTIONS) $(LLVM_LIBS_OPTIONS) $(LIBS) + @$(ECHO) ======= Finished linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG) + +install:: $(TOOLEXENAME) + @$(ECHO) Installing $(TOOLNAME) + $(VERB) $(INSTALL) $(TOOLEXENAME) $(DESTDIR)/bin +endif + +ifndef DISABLE_AUTO_DEPENDENCIES + +# Create .lo files in the OBJDIR directory from the .cpp and .c files... +$(OBJDIR)/%.lo: %.cpp $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library" + $(VERB) if $(LTCXXCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \ + then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi + +$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive" + $(VERB) if $(CXXCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \ + then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi + +$(OBJDIR)/%.lo: %.c $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.c For Shared Library" + $(VERB) if $(LTCCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \ + then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi + +$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.c For Archive" + $(VERB) if $(CCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \ + then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi + +# Create .bc files in the OBJDIR directory from .cpp and .c files... +$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp to bytecode" + $(VERB) if $(BCCXXCompile) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.Td" $< -o $@ ; \ + then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi + +$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.c to bytecode" + $(VERB) if $(BCCCompile) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.Td" $< -o $@ ; \ + then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Tpo"; exit 1; fi + +else -$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(LLVM_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir - @${ECHO} Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG) - $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS) - @${ECHO} ======= Finished building $(TOOLNAME) debug executable $(STRIP_WARN_MSG) ======= +$(OBJDIR)/%.lo: %.cpp $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library" + $(LTCXXCompile) $< -o $@ -$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(LLVM_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir - @${ECHO} Linking $(TOOLNAME) release executable - $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS) - @${ECHO} ======= Finished building $(TOOLNAME) release executable ======= +$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive" + $(CXXCompile) $< -o $@ -$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(LLVM_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir - @${ECHO} Linking $(TOOLNAME) profile executable - $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS) - @${ECHO} ======= Finished building $(TOOLNAME) profile executable ======= +$(OBJDIR)/%.lo: %.c $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library" + $(LTCCompile) $< -o $@ -install:: $(TOOLEXENAMES) - @${ECHO} Installing $(TOOLEXENAMES) to $(DESTDIR)$(bindir) - $(VERB)$(MKDIR) $(DESTDIR)$(bindir) - $(VERB)$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) -c -m 0755 $(TOOLEXENAMES) $(DESTDIR)$(bindir)/$(TOOLNAME) +$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive" + $(CCompile) $< -o $@ + +# Create .bc files in the OBJDIR directory from .cpp and .c files... +$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp To Bytecode" + $(BCCompileCPP) $< -o $@ + +$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir + @$(ECHO) "Compiling $(CONFIGURATION) $*.c To Bytecode" + $(BCCompileC) $< -o $@ endif +$(OBJDIR)/%.bc: %.ll $(OBJDIR)/.dir $(LLVMAS) + @$(ECHO) "Compiling $*.ll To Bytecode" + $(VERB) $(LLVMAS) $< -f -o $@ +ifdef TARGET -#--------------------------------------------------------- -.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir $(BUILD_OBJ_DIR)/BytecodeObj/.dir -.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir -.PRECIOUS: $(BUILD_OBJ_DIR)/Profile/.dir +TDFILES := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(BUILD_SRC_DIR)/../Target.td) -# Create .lo files in the ObjectFiles directory from the .cpp and .c files... -$(BUILD_OBJ_DIR)/Release/%.lo: %.cpp $(BUILD_OBJ_DIR)/Release/.dir - @${ECHO} "Compiling `basename $<`" - $(VERB) $(CompileO) $< -o $@ +$(BUILT_SOURCES): $(TDFILES) -$(BUILD_OBJ_DIR)/Release/%.lo: %.c $(BUILD_OBJ_DIR)/Release/.dir - @${ECHO} "Compiling `basename $<`" - $(VERB) $(CompileCO) $< -o $@ +%GenRegisterNames.inc : %.td + @echo "Building $( $@.tmp - $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@ + $(SED) '/^find_rule/d' | \ + $(SED) 's/void yyunput/inline void yyunput/' | \ + $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \ + $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \ + > $@.tmp + $(VERB) cmp -s $@ $@.tmp > /dev/null || $(MV) -f $@.tmp $@ @# remove the output of flex if it didn't get moved over... @rm -f $@.tmp @@ -819,25 +657,28 @@ YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output) %.c: %.y # Cancel built-in rules for yacc %.h: %.y # Cancel built-in rules for yacc %.cpp %.h : %.y - @${ECHO} "Bisoning `basename $<`" + @$(ECHO) "Bisoning $*.y" $(VERB) $(BISON) -v -d -p $( /dev/null || ${MV} -f $*.tab.c $*.cpp - $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h + $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || $(MV) -f $*.tab.c $*.cpp + $(VERB) cmp -s $*.tab.h $*.h > /dev/null || $(MV) -f $*.tab.h $*.h @# If the files were not updated, don't leave them lying around... @rm -f $*.tab.c $*.tab.h # To create the directories... %/.dir: - $(VERB) ${MKDIR} $* > /dev/null + $(VERB) $(MKDIR) $* > /dev/null @$(DATE) > $@ +.PRECIOUS: $(OBJDIR)/.dir $(LIBDIR)/.dir $(TOOLDIR)/.dir $(LLVMLIBDIR)/.dir +.PRECIOUS: $(LLVMTOOLDIR)/.dir + # To create postscript files from dot files... ifneq ($(DOT),false) %.ps: %.dot - ${DOT} -Tps < $< > $@ + $(DOT) -Tps < $< > $@ else %.ps: %.dot - ${ECHO} "Cannot build $@: The program dot is not installed" + $(ECHO) "Cannot build $@: The program dot is not installed" endif # @@ -849,9 +690,7 @@ endif # 'make clean' nukes the tree clean:: - $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release - $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend - $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/BytecodeObj + $(VERB) $(RM) -rf $(OBJDIR) $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set $(VERB) $(RM) -f *$(SHLIBEXT) @@ -869,33 +708,9 @@ ifndef DISABLE_AUTO_DEPENDENCIES # If dependencies were generated for the file that included this file, # include the dependencies now... # -SourceBaseNames := $(basename $(Source)) -SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d) - -# Create dependencies for the *.cpp files... -$(BUILD_OBJ_DIR)/Depend/%.d: %.cpp $(BUILD_OBJ_DIR)/Depend/.dir - $(VERB) $(Depend) $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ -# Create dependencies for the *.c files... -$(BUILD_OBJ_DIR)/Depend/%.d: %.c $(BUILD_OBJ_DIR)/Depend/.dir - $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ - -# -# Autoconf Dependencies. -# -$(LLVM_OBJ_ROOT)/config.status:: $(LLVM_SRC_ROOT)/configure - @${ECHO} "****************************************************************" - @${ECHO} " You need to re-run $(LLVM_SRC_ROOT)/configure" - @${ECHO} " in directory $(LLVM_OBJ_ROOT)" - @${ECHO} "****************************************************************" - $(VERB) exit 1 - -# If the Makefile in the source tree has been updated, copy it over into the -# build tree. -Makefile :: $(BUILD_SRC_DIR)/Makefile - @${ECHO} "===== Updating Makefile from source dir: `dirname $<` =====" - $(MKDIR) $(@D) - cp -f $< $@ +SourceBaseNames := $(basename $(Source)) +SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/$(CONFIGURATION)/%.d) # # Include dependencies generated from C/C++ source files, but not if we @@ -908,3 +723,70 @@ endif endif endif # ifndef DISABLE_AUTO_DEPENDENCIES + +############################################################################### +# PRECONDITIONS - that which must be built/checked first +############################################################################### + +OBJMKFILE := $(BUILD_OBJ_DIR)/Makefile +SRCMKFILE := $(BUILD_SRC_DIR)/Makefile +CONFIGURE := $(LLVM_SRC_ROOT)/configure +CONFIG_STATUS := $(LLVM_OBJ_ROOT)/config.status +MAKE_CONFIG_IN := $(LLVM_SRC_ROOT)/Makefile.config.in +MAKE_CONFIG := $(LLVM_OBJ_ROOT)/Makefile.config + +#------------------------------------------------------------------------ +# List of the preconditions +preconditions: $(CONFIG_STATUS) $(MAKE_CONFIG) $(OBJMKFILE) + +all dist distcheck install:: $(BUILT_SOURCES) + +clean:: + $(VERB) $(RM) -f $(BUILT_SOURCES) + +#------------------------------------------------------------------------ +# Make sure we're not using a stale configuration +.PRECIOUS: $(CONFIG_STATUS) +$(CONFIG_STATUS): $(CONFIGURE) + @$(ECHO) Reconfiguring with $@ + $(VERB) $(CONFIG_STATUS) --recheck + +#------------------------------------------------------------------------ +# Make sure the configuration makefile is up to date +$(MAKE_CONFIG): $(MAKE_CONFIG_IN) + @$(ECHO) Regenerating $@ + $(VERB) cd $(LLVM_OBJ_ROOT) ; $(CONFIG_STATUS) Makefile.config + $(VERB) $(MAKE) $(MAKEFLAGS) $(MAKECMDGOALS) + @exit 0; + +#------------------------------------------------------------------------ +# If the Makefile in the source tree has been updated, copy it over into the +# build tree. +.PRECIOUS: $(OBJMKFILE) +$(OBJMKFILE): $(SRCMKFILE) + @$(ECHO) "Updating Makefile from : $(dir $<)" + $(VERB) $(MKDIR) $(@D) + $(VERB) cp -f $< $@ + $(VERB) $(MAKE) $(MAKEFLAGS) $(MAKECMDGOALS) + @exit 0; + +############################################################################### +# MISCELLANEOUS - utility targets +############################################################################### + +#------------------------------------------------------------------------ +# Print out the directories used for building +printvars: + @$(ECHO) "BUILD_SRC_ROOT: " $(BUILD_SRC_ROOT) + @$(ECHO) "BUILD_SRC_DIR : " $(BUILD_SRC_DIR) + @$(ECHO) "BUILD_OBJ_ROOT: " $(BUILD_OBJ_ROOT) + @$(ECHO) "BUILD_OBJ_DIR : " $(BUILD_OBJ_DIR) + @$(ECHO) "LLVM_SRC_ROOT : " $(LLVM_SRC_ROOT) + @$(ECHO) "LLVM_OBJ_ROOT : " $(LLVM_OBJ_ROOT) + @$(ECHO) "CONFIGURATION : " $(CONFIGURATION) + @$(ECHO) "OBJDIR: " $(OBJDIR) + @$(ECHO) "LIBDIR: " $(LIBDIR) + @$(ECHO) "TOOLDIR: " $(TOOLDIR) + @$(ECHO) "TDFILES:" '$(TDFILES)' + @$(ECHO) "CXXCompile: " '$(CXXCompile)' + @$(ECHO) "CCompile: " '$(CCompile)' -- cgit v1.1