diff options
Diffstat (limited to 'src/google/protobuf/descriptor.proto')
-rw-r--r-- | src/google/protobuf/descriptor.proto | 292 |
1 files changed, 273 insertions, 19 deletions
diff --git a/src/google/protobuf/descriptor.proto b/src/google/protobuf/descriptor.proto index cc04aa8..a753601 100644 --- a/src/google/protobuf/descriptor.proto +++ b/src/google/protobuf/descriptor.proto @@ -1,6 +1,6 @@ // Protocol Buffers - Google's data interchange format // Copyright 2008 Google Inc. All rights reserved. -// http://code.google.com/p/protobuf/ +// https://developers.google.com/protocol-buffers/ // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are @@ -59,6 +59,11 @@ message FileDescriptorProto { // Names of files imported by this file. repeated string dependency = 3; + // Indexes of the public imported files in the dependency list above. + repeated int32 public_dependency = 10; + // Indexes of the weak imported files in the dependency list. + // For Google-internal migration only. Do not use. + repeated int32 weak_dependency = 11; // All top-level definitions in this file. repeated DescriptorProto message_type = 4; @@ -67,6 +72,12 @@ message FileDescriptorProto { repeated FieldDescriptorProto extension = 7; optional FileOptions options = 8; + + // This field contains optional information about the original source code. + // You may safely remove this entire field whithout harming runtime + // functionality of the descriptors -- the information is needed only by + // development tools. + optional SourceCodeInfo source_code_info = 9; } // Describes a message type. @@ -85,6 +96,8 @@ message DescriptorProto { } repeated ExtensionRange extension_range = 5; + repeated OneofDescriptorProto oneof_decl = 8; + optional MessageOptions options = 7; } @@ -95,13 +108,13 @@ message FieldDescriptorProto { // Order is weird for historical reasons. TYPE_DOUBLE = 1; TYPE_FLOAT = 2; - TYPE_INT64 = 3; // Not ZigZag encoded. Negative numbers - // take 10 bytes. Use TYPE_SINT64 if negative - // values are likely. + // Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT64 if + // negative values are likely. + TYPE_INT64 = 3; TYPE_UINT64 = 4; - TYPE_INT32 = 5; // Not ZigZag encoded. Negative numbers - // take 10 bytes. Use TYPE_SINT32 if negative - // values are likely. + // Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT32 if + // negative values are likely. + TYPE_INT32 = 5; TYPE_FIXED64 = 6; TYPE_FIXED32 = 7; TYPE_BOOL = 8; @@ -132,7 +145,7 @@ message FieldDescriptorProto { optional Label label = 4; // If type_name is set, this need not be set. If both this and type_name - // are set, this must be either TYPE_ENUM or TYPE_MESSAGE. + // are set, this must be one of TYPE_ENUM, TYPE_MESSAGE or TYPE_GROUP. optional Type type = 5; // For message and enum types, this is the name of the type. If the name @@ -153,9 +166,20 @@ message FieldDescriptorProto { // TODO(kenton): Base-64 encode? optional string default_value = 7; + // If set, gives the index of a oneof in the containing type's oneof_decl + // list. This field is a member of that oneof. Extensions of a oneof should + // not set this since the oneof to which they belong will be inferred based + // on the extension range containing the extension's field number. + optional int32 oneof_index = 9; + optional FieldOptions options = 8; } +// Describes a oneof. +message OneofDescriptorProto { + optional string name = 1; +} + // Describes an enum type. message EnumDescriptorProto { optional string name = 1; @@ -193,6 +217,7 @@ message MethodDescriptorProto { optional MethodOptions options = 4; } + // =================================================================== // Options @@ -214,10 +239,15 @@ message MethodDescriptorProto { // through 99999. It is up to you to ensure that you do not use the // same number for multiple options. // * For options which will be published and used publicly by multiple -// independent entities, e-mail kenton@google.com to reserve extension -// numbers. Simply tell me how many you need and I'll send you back a -// set of numbers to use -- there's no need to explain how you intend to -// use them. If this turns out to be popular, a web service will be set up +// independent entities, e-mail protobuf-global-extension-registry@google.com +// to reserve extension numbers. Simply provide your project name (e.g. +// Object-C plugin) and your porject website (if available) -- there's no need +// to explain how you intend to use them. Usually you only need one extension +// number. You can declare multiple options with only one extension number by +// putting them in a sub-message. See the Custom Options section of the docs +// for examples: +// https://developers.google.com/protocol-buffers/docs/proto#options +// If this turns out to be popular, a web service will be set up // to automatically assign option numbers. @@ -245,6 +275,27 @@ message FileOptions { // top-level extensions defined in the file. optional bool java_multiple_files = 10 [default=false]; + // If set true, then the Java code generator will generate equals() and + // hashCode() methods for all messages defined in the .proto file. + // - In the full runtime, this is purely a speed optimization, as the + // AbstractMessage base class includes reflection-based implementations of + // these methods. + //- In the lite runtime, setting this option changes the semantics of + // equals() and hashCode() to more closely match those of the full runtime; + // the generated methods compute their results based on field values rather + // than object identity. (Implementations should not assume that hashcodes + // will be consistent across runtimes or versions of the protocol compiler.) + optional bool java_generate_equals_and_hash = 20 [default=false]; + + // If set true, then the Java2 code generator will generate code that + // throws an exception whenever an attempt is made to assign a non-UTF-8 + // byte sequence to a string field. + // Message reflection will do the same. + // However, an extension field still accepts non-UTF-8 byte sequences. + // This option has no effect on when used with the lite runtime. + optional bool java_string_check_utf8 = 27 [default=false]; + + // Generated classes can be optimized for speed or code size. enum OptimizeMode { SPEED = 1; // Generate complete code for parsing, serialization, @@ -254,6 +305,9 @@ message FileOptions { } optional OptimizeMode optimize_for = 9 [default=SPEED]; + // Sets the Go package where structs generated from this .proto will be + // placed. There is no default. + optional string go_package = 11; @@ -264,13 +318,19 @@ message FileOptions { // early versions of proto2. // // Generic services are now considered deprecated in favor of using plugins - // that generate code specific to your particular RPC system. If you are - // using such a plugin, set these to false. In the future, we may change - // the default to false, so if you explicitly want generic services, you - // should explicitly set these to true. - optional bool cc_generic_services = 16 [default=true]; - optional bool java_generic_services = 17 [default=true]; - optional bool py_generic_services = 18 [default=true]; + // that generate code specific to your particular RPC system. Therefore, + // these default to false. Old code which depends on generic services should + // explicitly set them to true. + optional bool cc_generic_services = 16 [default=false]; + optional bool java_generic_services = 17 [default=false]; + optional bool py_generic_services = 18 [default=false]; + + // Is this file deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for everything in the file, or it will be completely ignored; in the very + // least, this is a formalization for deprecating files. + optional bool deprecated = 23 [default=false]; + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -305,6 +365,12 @@ message MessageOptions { // from proto1 easier; new code should avoid fields named "descriptor". optional bool no_standard_descriptor_accessor = 2 [default=false]; + // Is this message deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for the message, or it will be completely ignored; in the very least, + // this is a formalization for deprecating messages. + optional bool deprecated = 3 [default=false]; + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -333,6 +399,37 @@ message FieldOptions { optional bool packed = 2; + + // Should this field be parsed lazily? Lazy applies only to message-type + // fields. It means that when the outer message is initially parsed, the + // inner message's contents will not be parsed but instead stored in encoded + // form. The inner message will actually be parsed when it is first accessed. + // + // This is only a hint. Implementations are free to choose whether to use + // eager or lazy parsing regardless of the value of this option. However, + // setting this option true suggests that the protocol author believes that + // using lazy parsing on this field is worth the additional bookkeeping + // overhead typically needed to implement it. + // + // This option does not affect the public interface of any generated code; + // all method signatures remain the same. Furthermore, thread-safety of the + // interface is not affected by this option; const methods remain safe to + // call from multiple threads concurrently, while non-const methods continue + // to require exclusive access. + // + // + // Note that implementations may choose not to check required fields within + // a lazy sub-message. That is, calling IsInitialized() on the outher message + // may return true even if the inner message has missing required fields. + // This is necessary because otherwise the inner message would have to be + // parsed in order to perform the check, defeating the purpose of lazy + // parsing. An implementation which chooses not to check required fields + // must be consistent about it. That is, for any particular sub-message, the + // implementation must either *always* check its required fields, or *never* + // check its required fields, regardless of whether or not the message has + // been parsed. + optional bool lazy = 5 [default=false]; + // Is this field deprecated? // Depending on the target platform, this can emit Deprecated annotations // for accessors, or it will be completely ignored; in the very least, this @@ -353,6 +450,11 @@ message FieldOptions { // TODO: Fully-implement this, then remove the "experimental_" prefix. optional string experimental_map_key = 9; + // For Google-internal migration only. Do not use. + optional bool weak = 10 [default=false]; + + + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -362,6 +464,16 @@ message FieldOptions { message EnumOptions { + // Set this option to true to allow mapping different tag names to the same + // value. + optional bool allow_alias = 2; + + // Is this enum deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for the enum, or it will be completely ignored; in the very least, this + // is a formalization for deprecating enums. + optional bool deprecated = 3 [default=false]; + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -370,6 +482,12 @@ message EnumOptions { } message EnumValueOptions { + // Is this enum value deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for the enum value, or it will be completely ignored; in the very least, + // this is a formalization for deprecating enum values. + optional bool deprecated = 1 [default=false]; + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -384,6 +502,12 @@ message ServiceOptions { // we were already using them long before we decided to release Protocol // Buffers. + // Is this service deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for the service, or it will be completely ignored; in the very least, + // this is a formalization for deprecating services. + optional bool deprecated = 33 [default=false]; + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -398,6 +522,12 @@ message MethodOptions { // we were already using them long before we decided to release Protocol // Buffers. + // Is this method deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for the method, or it will be completely ignored; in the very least, + // this is a formalization for deprecating methods. + optional bool deprecated = 33 [default=false]; + // The parser stores options it doesn't recognize here. See above. repeated UninterpretedOption uninterpreted_option = 999; @@ -405,6 +535,7 @@ message MethodOptions { extensions 1000 to max; } + // A message representing a option the parser does not recognize. This only // appears in options protos created by the compiler::Parser class. // DescriptorPool resolves these when building Descriptor objects. Therefore, @@ -430,4 +561,127 @@ message UninterpretedOption { optional int64 negative_int_value = 5; optional double double_value = 6; optional bytes string_value = 7; + optional string aggregate_value = 8; +} + +// =================================================================== +// Optional source code info + +// Encapsulates information about the original source file from which a +// FileDescriptorProto was generated. +message SourceCodeInfo { + // A Location identifies a piece of source code in a .proto file which + // corresponds to a particular definition. This information is intended + // to be useful to IDEs, code indexers, documentation generators, and similar + // tools. + // + // For example, say we have a file like: + // message Foo { + // optional string foo = 1; + // } + // Let's look at just the field definition: + // optional string foo = 1; + // ^ ^^ ^^ ^ ^^^ + // a bc de f ghi + // We have the following locations: + // span path represents + // [a,i) [ 4, 0, 2, 0 ] The whole field definition. + // [a,b) [ 4, 0, 2, 0, 4 ] The label (optional). + // [c,d) [ 4, 0, 2, 0, 5 ] The type (string). + // [e,f) [ 4, 0, 2, 0, 1 ] The name (foo). + // [g,h) [ 4, 0, 2, 0, 3 ] The number (1). + // + // Notes: + // - A location may refer to a repeated field itself (i.e. not to any + // particular index within it). This is used whenever a set of elements are + // logically enclosed in a single code segment. For example, an entire + // extend block (possibly containing multiple extension definitions) will + // have an outer location whose path refers to the "extensions" repeated + // field without an index. + // - Multiple locations may have the same path. This happens when a single + // logical declaration is spread out across multiple places. The most + // obvious example is the "extend" block again -- there may be multiple + // extend blocks in the same scope, each of which will have the same path. + // - A location's span is not always a subset of its parent's span. For + // example, the "extendee" of an extension declaration appears at the + // beginning of the "extend" block and is shared by all extensions within + // the block. + // - Just because a location's span is a subset of some other location's span + // does not mean that it is a descendent. For example, a "group" defines + // both a type and a field in a single declaration. Thus, the locations + // corresponding to the type and field and their components will overlap. + // - Code which tries to interpret locations should probably be designed to + // ignore those that it doesn't understand, as more types of locations could + // be recorded in the future. + repeated Location location = 1; + message Location { + // Identifies which part of the FileDescriptorProto was defined at this + // location. + // + // Each element is a field number or an index. They form a path from + // the root FileDescriptorProto to the place where the definition. For + // example, this path: + // [ 4, 3, 2, 7, 1 ] + // refers to: + // file.message_type(3) // 4, 3 + // .field(7) // 2, 7 + // .name() // 1 + // This is because FileDescriptorProto.message_type has field number 4: + // repeated DescriptorProto message_type = 4; + // and DescriptorProto.field has field number 2: + // repeated FieldDescriptorProto field = 2; + // and FieldDescriptorProto.name has field number 1: + // optional string name = 1; + // + // Thus, the above path gives the location of a field name. If we removed + // the last element: + // [ 4, 3, 2, 7 ] + // this path refers to the whole field declaration (from the beginning + // of the label to the terminating semicolon). + repeated int32 path = 1 [packed=true]; + + // Always has exactly three or four elements: start line, start column, + // end line (optional, otherwise assumed same as start line), end column. + // These are packed into a single field for efficiency. Note that line + // and column numbers are zero-based -- typically you will want to add + // 1 to each before displaying to a user. + repeated int32 span = 2 [packed=true]; + + // If this SourceCodeInfo represents a complete declaration, these are any + // comments appearing before and after the declaration which appear to be + // attached to the declaration. + // + // A series of line comments appearing on consecutive lines, with no other + // tokens appearing on those lines, will be treated as a single comment. + // + // Only the comment content is provided; comment markers (e.g. //) are + // stripped out. For block comments, leading whitespace and an asterisk + // will be stripped from the beginning of each line other than the first. + // Newlines are included in the output. + // + // Examples: + // + // optional int32 foo = 1; // Comment attached to foo. + // // Comment attached to bar. + // optional int32 bar = 2; + // + // optional string baz = 3; + // // Comment attached to baz. + // // Another line attached to baz. + // + // // Comment attached to qux. + // // + // // Another line attached to qux. + // optional double qux = 4; + // + // optional string corge = 5; + // /* Block comment attached + // * to corge. Leading asterisks + // * will be removed. */ + // /* Block comment attached to + // * grault. */ + // optional int32 grault = 6; + optional string leading_comments = 3; + optional string trailing_comments = 4; + } } |