aboutsummaryrefslogtreecommitdiffstats
path: root/hw/pl011.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/pl011.c')
-rw-r--r--hw/pl011.c251
1 files changed, 0 insertions, 251 deletions
diff --git a/hw/pl011.c b/hw/pl011.c
deleted file mode 100644
index 657f03b..0000000
--- a/hw/pl011.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Arm PrimeCell PL011 UART
- *
- * Copyright (c) 2006 CodeSourcery.
- * Written by Paul Brook
- *
- * This code is licenced under the GPL.
- */
-
-#include "vl.h"
-
-typedef struct {
- uint32_t base;
- uint32_t readbuff;
- uint32_t flags;
- uint32_t lcr;
- uint32_t cr;
- uint32_t dmacr;
- uint32_t int_enabled;
- uint32_t int_level;
- uint32_t read_fifo[16];
- uint32_t ilpr;
- uint32_t ibrd;
- uint32_t fbrd;
- uint32_t ifl;
- int read_pos;
- int read_count;
- int read_trigger;
- CharDriverState *chr;
- void *pic;
- int irq;
-} pl011_state;
-
-#define PL011_INT_TX 0x20
-#define PL011_INT_RX 0x10
-
-#define PL011_FLAG_TXFE 0x80
-#define PL011_FLAG_RXFF 0x40
-#define PL011_FLAG_TXFF 0x20
-#define PL011_FLAG_RXFE 0x10
-
-static const unsigned char pl011_id[] =
-{ 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
-
-static void pl011_update(pl011_state *s)
-{
- uint32_t flags;
-
- flags = s->int_level & s->int_enabled;
- pic_set_irq_new(s->pic, s->irq, flags != 0);
-}
-
-static uint32_t pl011_read(void *opaque, target_phys_addr_t offset)
-{
- pl011_state *s = (pl011_state *)opaque;
- uint32_t c;
-
- offset -= s->base;
- if (offset >= 0xfe0 && offset < 0x1000) {
- return pl011_id[(offset - 0xfe0) >> 2];
- }
- switch (offset >> 2) {
- case 0: /* UARTDR */
- s->flags &= ~PL011_FLAG_RXFF;
- c = s->read_fifo[s->read_pos];
- if (s->read_count > 0) {
- s->read_count--;
- if (++s->read_pos == 16)
- s->read_pos = 0;
- }
- if (s->read_count == 0) {
- s->flags |= PL011_FLAG_RXFE;
- }
- if (s->read_count == s->read_trigger - 1)
- s->int_level &= ~ PL011_INT_RX;
- pl011_update(s);
- return c;
- case 1: /* UARTCR */
- return 0;
- case 6: /* UARTFR */
- return s->flags;
- case 8: /* UARTILPR */
- return s->ilpr;
- case 9: /* UARTIBRD */
- return s->ibrd;
- case 10: /* UARTFBRD */
- return s->fbrd;
- case 11: /* UARTLCR_H */
- return s->lcr;
- case 12: /* UARTCR */
- return s->cr;
- case 13: /* UARTIFLS */
- return s->ifl;
- case 14: /* UARTIMSC */
- return s->int_enabled;
- case 15: /* UARTRIS */
- return s->int_level;
- case 16: /* UARTMIS */
- return s->int_level & s->int_enabled;
- case 18: /* UARTDMACR */
- return s->dmacr;
- default:
- cpu_abort (cpu_single_env, "pl011_read: Bad offset %x\n", offset);
- return 0;
- }
-}
-
-static void pl011_set_read_trigger(pl011_state *s)
-{
-#if 0
- /* The docs say the RX interrupt is triggered when the FIFO exceeds
- the threshold. However linux only reads the FIFO in response to an
- interrupt. Triggering the interrupt when the FIFO is non-empty seems
- to make things work. */
- if (s->lcr & 0x10)
- s->read_trigger = (s->ifl >> 1) & 0x1c;
- else
-#endif
- s->read_trigger = 1;
-}
-
-static void pl011_write(void *opaque, target_phys_addr_t offset,
- uint32_t value)
-{
- pl011_state *s = (pl011_state *)opaque;
- unsigned char ch;
-
- offset -= s->base;
- switch (offset >> 2) {
- case 0: /* UARTDR */
- /* ??? Check if transmitter is enabled. */
- ch = value;
- if (s->chr)
- qemu_chr_write(s->chr, &ch, 1);
- s->int_level |= PL011_INT_TX;
- pl011_update(s);
- break;
- case 1: /* UARTCR */
- s->cr = value;
- break;
- case 8: /* UARTUARTILPR */
- s->ilpr = value;
- break;
- case 9: /* UARTIBRD */
- s->ibrd = value;
- break;
- case 10: /* UARTFBRD */
- s->fbrd = value;
- break;
- case 11: /* UARTLCR_H */
- s->lcr = value;
- pl011_set_read_trigger(s);
- break;
- case 12: /* UARTCR */
- /* ??? Need to implement the enable and loopback bits. */
- s->cr = value;
- break;
- case 13: /* UARTIFS */
- s->ifl = value;
- pl011_set_read_trigger(s);
- break;
- case 14: /* UARTIMSC */
- s->int_enabled = value;
- pl011_update(s);
- break;
- case 17: /* UARTICR */
- s->int_level &= ~value;
- pl011_update(s);
- break;
- case 18: /* UARTDMACR */
- s->dmacr = value;
- if (value & 3)
- cpu_abort(cpu_single_env, "PL011: DMA not implemented\n");
- break;
- default:
- cpu_abort (cpu_single_env, "pl011_write: Bad offset %x\n", offset);
- }
-}
-
-static int pl011_can_recieve(void *opaque)
-{
- pl011_state *s = (pl011_state *)opaque;
-
- if (s->lcr & 0x10)
- return s->read_count < 16;
- else
- return s->read_count < 1;
-}
-
-static void pl011_recieve(void *opaque, const uint8_t *buf, int size)
-{
- pl011_state *s = (pl011_state *)opaque;
- int slot;
-
- slot = s->read_pos + s->read_count;
- if (slot >= 16)
- slot -= 16;
- s->read_fifo[slot] = *buf;
- s->read_count++;
- s->flags &= ~PL011_FLAG_RXFE;
- if (s->cr & 0x10 || s->read_count == 16) {
- s->flags |= PL011_FLAG_RXFF;
- }
- if (s->read_count == s->read_trigger) {
- s->int_level |= PL011_INT_RX;
- pl011_update(s);
- }
-}
-
-static void pl011_event(void *opaque, int event)
-{
- /* ??? Should probably implement break. */
-}
-
-static CPUReadMemoryFunc *pl011_readfn[] = {
- pl011_read,
- pl011_read,
- pl011_read
-};
-
-static CPUWriteMemoryFunc *pl011_writefn[] = {
- pl011_write,
- pl011_write,
- pl011_write
-};
-
-void pl011_init(uint32_t base, void *pic, int irq,
- CharDriverState *chr)
-{
- int iomemtype;
- pl011_state *s;
-
- s = (pl011_state *)qemu_mallocz(sizeof(pl011_state));
- iomemtype = cpu_register_io_memory(0, pl011_readfn,
- pl011_writefn, s);
- cpu_register_physical_memory(base, 0x00000fff, iomemtype);
- s->base = base;
- s->pic = pic;
- s->irq = irq;
- s->chr = chr;
- s->read_trigger = 1;
- s->ifl = 0x12;
- s->cr = 0x300;
- s->flags = 0x90;
- if (chr){
- qemu_chr_add_read_handler(chr, pl011_can_recieve, pl011_recieve, s);
- qemu_chr_add_event_handler(chr, pl011_event);
- }
- /* ??? Save/restore. */
-}
-
generated by cgit v1.1 at 2025-08-16 05:05:38 +0000