diff options
Diffstat (limited to 'WebKitTools/android/flex-2.5.4a/MISC/Amiga')
6 files changed, 0 insertions, 316 deletions
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/README.amiga b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/README.amiga deleted file mode 100644 index 0efdb93..0000000 --- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/README.amiga +++ /dev/null @@ -1,72 +0,0 @@ - -This file, ./MISC/Amiga/README.amiga, describes the necessary steps to get -the FLEX 2.5.1 program up and running on the Commodore AMIGA with the -help of SAS/C++ 6.51 and SMake 6.50. Also it describes the contents of the -subdirectory ./MISC/Amiga, where `.' denotes the root directory of the -standard installation of FLEX 2.5.1. - - -FILES ADDED FOR INSTALLING FLEX 2.5.1 ON THE AMIGA - -The standard distribution of FLEX 2.5.1 is assumed to be installed on -your AMIGA computer. `Installed' means that all source files from the -original archive are present in a root directory (denoted by `.' in what -follows) and, if appropriate, one or more subdirectories, on your machine. - -The original source files are totally left untouched, the necessary changes -are applied in the form of `change files'. For installing FLEX 2.5.1 on -the AMIGA, several additional files come with this patch. - - -----rw-d 2 738 Apr 3 11:49 config.h - -----rw-d 1 169 Apr 3 11:33 libmain.ch - -----rw-d 1 159 Apr 3 11:33 libyywrap.ch - -----rw-d 1 167 Apr 3 11:33 parse.ych - -----rw-d 6 2840 Apr 3 11:34 README.amiga - -----rw-d 11 5503 Apr 3 11:45 smakefile - Dirs:0 Files:6 Blocks:22 Bytes:9576 - - -HOW TO INSTALL FLEX 2.5.1 ON THE AMIGA - -Copy all files from ./MISC/Amiga to the root directory of the FLEX 2.5.1 -distribution and edit `SMakefile' as it instructs you. There shouldn't be -too many changes necessary. Then say "make bootflex". This creates a -preliminary version of FLEX 2.5.1 without using itself. - -WARNING: Don't say "make flex" yet. Any pre-2.5 version of FLEX will fail -on the file `scan.l' due to some new features only present in FLEX 2.5. - -Then say "make flex". At least once the FLEX program created in the first -step will be used. To make sure that everything is alright, finally say -"make check". If you change the code, you should also say "make bigcheck" -for some more thorough testing. - -When you are satisfied with the results, say "make install". This will -copy the `flex' binary, the `libfl.lib' file, and the `FlexLexer.h' header -to the paths specified in the `SMakefile'. - -Finally, you should say "make clean" to remove all intermediate files from -the root directory. "make veryclean" also removes `flex' and `scan.c'. - - -TROUBLE SHOOTING - -FLEX 2.5.1 was ported to the AMIGA and tested with the following setup: - - AMIGA 2000 - GVP G-Force 030/50/50/8 - SAS/C++ 6.51 - SED 2.05 - BISON 1.22 - WMERGE from the CWEB distribution - -Should you encounter problems with this AMIGA patch for FLEX 2.5.1 or -should you have ideas for further improvements, like using GnuMake instead -of SMake, contact the author of this contribution - -Andreas Scherer -Roland-Stra{\ss}e 16 -52070 Aachen -Germany - -<scherer@genesis.informatik.rwth-aachen.de> (Internet) diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/SMakefile b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/SMakefile deleted file mode 100644 index 28e0dd4..0000000 --- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/SMakefile +++ /dev/null @@ -1,195 +0,0 @@ -# @(#) $Header: Makefile.in,v 1.2 94/01/04 14:33:19 vern Exp $ (LBL) - -# If your version of "make" does not define $(MAKE), comment in the -# definition of "MAKE" below. (You only need to do this if you intend -# to do "make bigcheck" or "make dist".) -MAKE = smake - -# Possible values for DEFS: -# -# For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256" -# to DEFS. -# -# For Vax/VMS, add "-DVMS" to DEFS. -# -# For MS-DOS, add "-DMS_DOS" to DEFS. See the directory MISC/MSDOS for -# additional info. - -CFLAGS = data=far ignore=85 noicons stackextend optimize -DEFS = define=YYBISON=1 define=YY_NEVER_INTERACTIVE=1 -LDFLAGS = noicons -LIBS = - -# Installation targeting. Files will be installed under the tree -# rooted at prefix. flex will be installed in bindir, libfl.lib in -# libdir, FlexLexer.h will be installed in includedir, and the manual -# pages will be installed in mandir with extension manext. -# -# Raw, unformatted troff source will be installed if INSTALLMAN=man, -# nroff preformatted versions will be installed if INSTALLMAN=cat. - -prefix = Programmer:other # Change this for your AMIGA system. -exec_prefix = $(prefix) -bindir = $(exec_prefix)/bin -libdir = $(exec_prefix)/lib -includedir = $(prefix)/include -manext = 1 -mandir = $(prefix)/man/man$(manext) - -# You can define this to be "lex" if you want to replace lex at your site. -FLEX = flex - -INSTALLMAN = man - -SHELL = -srcdir = . -VPATH = - -LN_S = -YACC = bison -y -SED = sed -CC = sc -WMERGE = wmerge # from the CWEB distribution -AR = oml -RANLIB = -INSTALL = copy clone -INSTALL_DATA = $(INSTALL) -INSTALL_PROGRAM = $(INSTALL) - -# You normally do not need to modify anything below this point. -# ------------------------------------------------------------ - -CPPFLAGS = idir=. idir=$(srcdir) $(DEFS) - -.c.o: - $(CC) $(CPPFLAGS) $(CFLAGS) $< - -HEADERS = flexdef.h version.h - -SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \ - scan.l skel.c sym.c tblcmp.c yylex.c -OBJECTS = ccl.o dfa.o ecs.o gen.o main.o misc.o nfa.o parse.o \ - skel.o sym.o tblcmp.o yylex.o \ - $(libdir)/alloca.o $(libdir)/xmalloc.o - -LIBSRCS = libmain.c libyywrap.c -LIBOBJS = ansilibmain.o ansilibyywrap.o - -LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \ - scan.c skel.c sym.c tblcmp.c yylex.c - -DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \ - configure.in conf.in Makefile.in mkskel.sh skel.c flex.skl \ - $(HEADERS) $(SOURCES) $(LIBSRCS) MISC \ - flex.1 scan.c install.sh mkinstalldirs configure - -DIST_NAME = flex - -# which "flex" to use to generate scan.c from scan.l -FLEX_EXEC = ./$(FLEX) -FLEX_FLAGS = -t $(PERF_REPORT) -COMPRESSION = -PERF_REPORT = -p - -FLEXLIB = libfl.lib - -all: $(FLEX) - -$(FLEX): $(OBJECTS) $(FLEXLIB) scan.o - $(CC) $(CFLAGS) link to $(FLEX) $(LDFLAGS) $(OBJECTS) scan.o $(FLEXLIB) $(LIBS) - -bootflex: $(OBJECTS) $(FLEXLIB) initscan.o - $(CC) $(CFLAGS) link to $(FLEX) $(LDFLAGS) $(OBJECTS) initscan.o $(FLEXLIB) $(LIBS) - -parse.c: ansiparse.y - $(YACC) -d ansiparse.y - $(SED) "/extern char.*malloc/d" <y.tab.c >parse.tmp - copy parse.tmp parse.c - copy y.tab.h parse.h - @delete y.tab.c y.tab.h parse.tmp -ansiparse.y: $(srcdir)/parse.y parse.ych - $(WMERGE) $(srcdir)/parse.y parse.ych ansiparse.y - -parse.h: parse.c - -scan.c: scan.l - $(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l >scan.tmp - $(SED) s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.tmp >scan.c - @delete scan.tmp - -scan.o: scan.c parse.h flexdef.h config.h -initscan.o: initscan.c parse.h flexdef.h config.h -yylex.o: yylex.c parse.h flexdef.h config.h - -skel.c: flex.skl mkskel.sh - $(SHELL) $(srcdir)/mkskel.sh $(srcdir)/flex.skl >skel.c - -main.o: main.c flexdef.h config.h version.h -ccl.o: ccl.c flexdef.h config.h -dfa.o: dfa.c flexdef.h config.h -ecs.o: ecs.c flexdef.h config.h -gen.o: gen.c flexdef.h config.h -misc.o: misc.c flexdef.h config.h -nfa.o: nfa.c flexdef.h config.h -parse.o: parse.c flexdef.h config.h -skel.o: skel.c flexdef.h config.h -sym.o: sym.c flexdef.h config.h -tblcmp.o: tblcmp.c flexdef.h config.h - -alloca.o: alloca.c - $(CC) $(CPPFLAGS) $(CFLAGS) define=xmalloc=yy_flex_xmalloc alloca.c - -alloca.c: $(srcdir)/MISC/alloca.c - @delete alloca.c - copy $(srcdir)/MISC/alloca.c . - -test: check -check: flex - $(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l > temp_a - $(SED) s,"$(srcdir)/scan.l","scan.l", < temp_a > temp_b - -diff scan.c temp_b -l10000 -w - @delete temp_? - @echo "Check successful, using COMPRESSION='$(COMPRESSION)'" - -bigcheck: - delete scan.c - $(MAKE) COMPRESSION=-C check - delete scan.c - $(MAKE) COMPRESSION=-Ce check - delete scan.c - $(MAKE) COMPRESSION=-Cm check - delete scan.c - $(MAKE) COMPRESSION=-Cfea check - delete scan.c - $(MAKE) COMPRESSION=-CFer check - delete scan.c - $(MAKE) COMPRESSION=-l PERF_REPORT= check - delete scan.c - $(MAKE) - @echo "All checks successful" - -$(FLEXLIB): $(LIBOBJS) - $(AR) $(FLEXLIB) R $(LIBOBJS) - -$(FLEX).man: flex.1 # SMAKE can't `cd', sorry. And, I don't have nroff. -# cd $(srcdir), nroff -man flex.1 >$(FLEX).man - -install: $(FLEX) $(FLEXLIB) - $(INSTALL_PROGRAM) $(FLEX) $(bindir)/$(FLEX) -# @delete $(bindir)/$(FLEX)++ - $(INSTALL_DATA) $(FLEXLIB) $(libdir)/libfl.lib - $(INSTALL_DATA) $(srcdir)/FlexLexer.h $(includedir)/FlexLexer.h - -ansilibmain.o: ansilibmain.c -ansilibmain.c: libmain.c libmain.ch - $(WMERGE) libmain.c libmain.ch ansilibmain.c -ansilibyywrap.o: ansilibyywrap.c -ansilibyywrap.c: libyywrap.c libyywrap.ch - $(WMERGE) libyywrap.c libyywrap.ch ansilibyywrap.c - -clean: - -delete parse.(c|h) ansi\#? \#?.(bak|o|lnk) \ - alloca.c lex.yy.(c|cc) $(FLEXLIB) - -veryclean: clean - -delete $(FLEX) scan.c diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/config.h b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/config.h deleted file mode 100644 index 1c02a3c..0000000 --- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* $Header: /home/daffy/u0/vern/flex/RCS/conf.in,v 1.2 95/01/09 12:11:51 vern Exp $ */ - -/* Define to empty if the keyword does not work. */ -#undef const - -/* Define to `unsigned' if <sys/types.h> doesn't define. */ -#undef size_t - -/* Define if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define if you have the <malloc.h> header file. */ -#undef HAVE_MALLOC_H - -/* Define if you have the <string.h> header file. */ -#define HAVE_STRING_H 1 - -/* Define if you have the <sys/types.h> header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define if you have <alloca.h> and it should be used (not on Ultrix). */ -#undef HAVE_ALLOCA_H - -/* Define if platform-specific command line handling is necessary. */ -#undef NEED_ARGV_FIXUP diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libmain.ch b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libmain.ch deleted file mode 100644 index e0f5b40..0000000 --- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libmain.ch +++ /dev/null @@ -1,8 +0,0 @@ -Changes for LIBMAIN.C 2.4.7 by Andreas Scherer, January 19, 1995. -Modified for LIBMAIN.C 2.5.1, April 3, 1995. - -@x l.5 -extern int yylex(); -@y -extern int yylex(void); -@z diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libyywrap.ch b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libyywrap.ch deleted file mode 100644 index b2d6a3f..0000000 --- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libyywrap.ch +++ /dev/null @@ -1,8 +0,0 @@ -Changes for LIBYYWRAP.C 2.4.7 by Andreas Scherer, January 19, 1995. -Modified for LIBYYWRAP.C 2.5.1, April 3, 1995. - -@x l.5 -int yywrap() -@y -int yywrap(void) -@z diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/parse.ych b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/parse.ych deleted file mode 100644 index 5671a5b..0000000 --- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/parse.ych +++ /dev/null @@ -1,8 +0,0 @@ -Changes for PARSE.Y 2.4.7 by Andreas Scherer, January 20, 1995. -Modified for PARSE.Y 2.5.1, April 3, 1995. - -@x l.60 -char *alloca (); -@y -char *alloca(unsigned int); -@z |