From 2fc2651226baac27029e38c9d6ef883fa32084db Mon Sep 17 00:00:00 2001 From: Steve Block Date: Wed, 18 May 2011 13:36:51 +0100 Subject: Merge WebKit at r78450: Initial merge by git. Change-Id: I6d3e5f1f868ec266a0aafdef66182ddc3f265dc1 --- LayoutTests/http/conf/apache2-msys-httpd.conf | 709 ++++++++++++++++++++++++++ 1 file changed, 709 insertions(+) create mode 100644 LayoutTests/http/conf/apache2-msys-httpd.conf (limited to 'LayoutTests/http') diff --git a/LayoutTests/http/conf/apache2-msys-httpd.conf b/LayoutTests/http/conf/apache2-msys-httpd.conf new file mode 100644 index 0000000..9b14992 --- /dev/null +++ b/LayoutTests/http/conf/apache2-msys-httpd.conf @@ -0,0 +1,709 @@ +## +## httpd.conf -- Apache HTTP server configuration file +## + +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# After this file is processed, the server will look for and process +# /private/etc/apache2/srm.conf and then /private/etc/apache2/access.conf +# unless you have overridden these with ResourceConfig and/or +# AccessConfig directives here. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "/usr/local/apache" will be interpreted by the +# server as "/usr/local/apache/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation +# (available at ); +# you will save yourself a lot of trouble. +# +ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2" + +# +# The LockFile directive sets the path to the lockfile used when Apache +# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or +# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at +# its default value. The main reason for changing it is if the logs +# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL +# DISK. The PID of the main server process is automatically appended to +# the filename. +# +#LockFile "/tmp/WebKit/httpd.lock" + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +PidFile "/tmp/WebKit/httpd.pid" + +# +# ScoreBoardFile: File used to store internal server process information. +# Not all architectures require this. But if yours does (you'll know because +# this file will be created when you run Apache) then you *must* ensure that +# no two invocations of Apache share the same scoreboard file. +# +ScoreBoardFile "/tmp/WebKit/httpd.scoreboard" + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +# +# Server-pool size regulation. Rather than making you guess how many +# server processes you need, Apache dynamically adapts to the load it +# sees --- that is, it tries to maintain enough server processes to +# handle the current load, plus a few spare servers to handle transient +# load spikes (e.g., multiple simultaneous requests from a single +# Netscape browser). +# +# It does this by periodically checking how many servers are waiting +# for a request. If there are fewer than MinSpareServers, it creates +# a new spare. If there are more than MaxSpareServers, some of the +# spares die off. The default values are probably OK for most sites. +# +#MinSpareServers 1 +#MaxSpareServers 5 + +# +# Number of servers to start initially --- should be a reasonable ballpark +# figure. +# +#StartServers 1 + +# +# Limit on total number of servers running, i.e., limit on the number +# of clients who can simultaneously connect --- if this limit is ever +# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. +# It is intended mainly as a brake to keep a runaway server from taking +# the system with it as it spirals down... +# +#MaxClients 150 + +# +# MaxRequestsPerChild: the number of requests each child process is +# allowed to process before the child dies. The child will exit so +# as to avoid problems after prolonged use when Apache (and maybe the +# libraries it uses) leak memory or other resources. On most systems, this +# isn't really needed, but a few (such as Solaris) do have notable leaks +# in the libraries. For these platforms, set to something like 10000 +# or so; a setting of 0 means unlimited. +# +# NOTE: This value does not include keepalive requests after the initial +# request per connection. For example, if a child process handles +# an initial request and 10 subsequent "keptalive" requests, it +# would only count as 1 request towards this limit. +# +#MaxRequestsPerChild 100000 + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Configured from the httpd command line for WebKit layout tests. +# Port 8443 is hard-coded as it is needed for the HTTPS configuration later on. +# +#Listen 3000 +Listen 127.0.0.1:8080 +Listen 127.0.0.1:8443 +# We listen to both IPv4 and IPv6 loop-back addresses, but ignore +# requests to 8000 from random users on network. +# See https://bugs.webkit.org/show_bug.cgi?id=37104 +#Listen [::1]:8000 +#Listen [::1]:8080 +#Listen [::1]:8443 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Please read the file http://httpd.apache.org/docs/dso.html for more +# details about the DSO mechanism and run `httpd -l' for the list of already +# built-in (statically linked and thus always available) modules in your httpd +# binary. +# +# Note: The order in which modules are loaded is important. Don't change +# the order below without expert advice. +# +# Example: +# LoadModule foo_module libexec/mod_foo.so +#LoadModule authn_file_module modules/mod_authn_file.so +#LoadModule authn_dbm_module modules/mod_authn_dbm.so +#LoadModule authn_anon_module modules/mod_authn_anon.so +#LoadModule authn_dbd_module modules/mod_authn_dbd.so +#LoadModule authn_default_module modules/mod_authn_default.so +LoadModule authz_host_module modules/mod_authz_host.so +#LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +#LoadModule authz_user_module modules/mod_authz_user.so +#LoadModule authz_dbm_module modules/mod_authz_dbm.so +#LoadModule authz_owner_module modules/mod_authz_owner.so +#LoadModule authz_default_module modules/mod_authz_default.so +#LoadModule auth_basic_module modules/mod_auth_basic.so +#LoadModule auth_digest_module modules/mod_auth_digest.so +#LoadModule cache_module modules/mod_cache.so +#LoadModule disk_cache_module modules/mod_disk_cache.so +#LoadModule mem_cache_module modules/mod_mem_cache.so +#LoadModule dbd_module modules/mod_dbd.so +#LoadModule dumpio_module modules/mod_dumpio.so +#LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule include_module modules/mod_include.so +#LoadModule filter_module modules/mod_filter.so +#LoadModule substitute_module modules/mod_substitute.so +#LoadModule deflate_module modules/mod_deflate.so +LoadModule log_config_module modules/mod_log_config.so +#LoadModule log_forensic_module modules/mod_log_forensic.so +#LoadModule logio_module modules/mod_logio.so +#LoadModule env_module modules/mod_env.so +#LoadModule mime_magic_module modules/mod_mime_magic.so +#LoadModule cern_meta_module modules/mod_cern_meta.so +#LoadModule expires_module modules/mod_expires.so +LoadModule headers_module modules/mod_headers.so +#LoadModule ident_module modules/mod_ident.so +#LoadModule usertrack_module modules/mod_usertrack.so +#LoadModule unique_id_module modules/mod_unique_id.so +#LoadModule setenvif_module modules/mod_setenvif.so +#LoadModule version_module modules/mod_version.so +#LoadModule proxy_module modules/mod_proxy.so +#LoadModule proxy_connect_module modules/mod_proxy_connect.so +#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +#LoadModule proxy_http_module modules/mod_proxy_http.so +#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so +#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule ssl_module modules/mod_ssl.so +LoadModule mime_module modules/mod_mime.so +#LoadModule dav_module modules/mod_dav.so +#LoadModule status_module modules/mod_status.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule asis_module modules/mod_asis.so +#LoadModule info_module modules/mod_info.so +LoadModule cgi_module modules/mod_cgi.so +#LoadModule dav_fs_module modules/mod_dav_fs.so +#LoadModule vhost_alias_module modules/mod_vhost_alias.so +LoadModule negotiation_module modules/mod_negotiation.so +#LoadModule dir_module modules/mod_dir.so +LoadModule imagemap_module modules/mod_imagemap.so +LoadModule actions_module modules/mod_actions.so +#LoadModule speling_module modules/mod_speling.so +#LoadModule userdir_module modules/mod_userdir.so +LoadModule alias_module modules/mod_alias.so +LoadModule rewrite_module modules/mod_rewrite.so +#LoadModule bonjour_module modules/mod_bonjour.so +#LoadModule php5_module modules/php5apache2_2.dll +#LoadModule fastcgi_module modules/mod_fastcgi.so +#LoadModule isapi_module modules/mod_isapi.so + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerName allows you to set a host name which is sent back to clients for +# your server if it's different than the one the program would get (i.e., use +# "www" instead of the host's real name). +# +# Note: You cannot just invent host names and hope they work. The name you +# define here must be a valid DNS name for your host. If you don't understand +# this, ask your network administrator. +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address (e.g., http://123.45.67.89/) +# anyway, and this will make redirections work in a sensible way. +# +# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your +# machine always knows itself by this address. If you use Apache strictly for +# local testing and development, you may use 127.0.0.1 as the server name. +# +ServerName 127.0.0.1 + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +# Configured from the httpd command line for WebKit layout tests. +#DocumentRoot "/Library/WebServer/Documents" + +# +# Each directory to which Apache has access, can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# + +# +# This may also be "None", "All", or any combination of "Indexes", +# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# + Options Indexes FollowSymLinks MultiViews ExecCGI Includes + +# +# This controls which options the .htaccess files in directories can +# override. Can also be "All", or any combination of "Options", "FileInfo", +# "AuthConfig", and "Limit" +# + AllowOverride All + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + + +# +# AccessFileName: The name of the file to look for in each directory +# for access control information. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess files from being viewed by +# Web clients. Since .htaccess files often contain authorization +# information, access is disallowed for security reasons. Comment +# these lines out if you want Web visitors to see the contents of +# .htaccess files. If you change the AccessFileName directive above, +# be sure to make the corresponding changes here. +# +# Also, folks tend to use names such as .htpasswd for password +# files, so this will protect those as well. +# + + Order allow,deny + Deny from all + Satisfy All + + +# +# Apple specific filesystem protection. +# + + + Order allow,deny + Deny from all + Satisfy All + + + + Order allow,deny + Deny from all + Satisfy All + + +# +# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each +# document that was negotiated on the basis of content. This asks proxy +# servers not to cache the document. Uncommenting the following line disables +# this behavior, and proxies will be allowed to cache the documents. +# +#CacheNegotiatedDocs + +# +# UseCanonicalName: (new for 1.3) With this setting turned on, whenever +# Apache needs to construct a self-referencing URL (a URL that refers back +# to the server the response is coming from) it will use ServerName and +# Port to form a "canonical" name. With this setting off, Apache will +# use the hostname:port that the client supplied, when possible. This +# also affects SERVER_NAME and SERVER_PORT in CGI scripts. +# +UseCanonicalName On + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +# Configured from the httpd command line for WebKit layout tests. +# +# +# TypesConfig /private/etc/apache2/mime.types +# + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +# Configured from the httpd command line for WebKit layout tests. +#ErrorLog "/tmp/layout-test-results/error_log" + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a +# container, they will be logged here. Contrariwise, if you *do* +# define per- access logfiles, transactions will be +# logged therein and *not* in this file. +# +# Configured from the httpd command line for WebKit layout tests. +#CustomLog "/tmp/layout-test-results/access_log" common + +# +# If you prefer a single logfile with access, agent, and referer information +# (Combined Logfile Format) you can use the following directive. +# +#CustomLog "/tmp/layout-test-results/access_log" combined + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (error documents, FTP directory listings, +# mod_status and mod_info output etc., but not CGI generated documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# + + +# End of aliases. + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Format: Redirect old-URI new-URL +# + +# +# Document types. +# + + + # + # AddLanguage allows you to specify the language of a document. You can + # then use content negotiation to give a browser a file in a language + # it can understand. + # + # Note 1: The suffix does not have to be the same as the language + # keyword --- those with documents in Polish (whose net-standard + # language code is pl) may wish to use "AddLanguage pl .po" to + # avoid the ambiguity with the common suffix for perl scripts. + # + # Note 2: The example entries below illustrate that in quite + # some cases the two character 'Language' abbreviation is not + # identical to the two character 'Country' code for its country, + # E.g. 'Danmark/dk' versus 'Danish/da'. + # + # Note 3: In the case of 'ltz' we violate the RFC by using a three char + # specifier. But there is 'work in progress' to fix this and get + # the reference data for rfc1766 cleaned up. + # + # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) + # French (fr) - German (de) - Greek-Modern (el) + # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) + # Portugese (pt) - Luxembourgeois* (ltz) + # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs) + # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) + # Russian (ru) + # + AddLanguage da .dk + AddLanguage nl .nl + AddLanguage en .en + AddLanguage et .ee + AddLanguage fr .fr + AddLanguage de .de + AddLanguage el .el + AddLanguage he .he + AddCharset ISO-8859-8 .iso8859-8 + AddLanguage it .it + AddLanguage ja .ja + AddCharset ISO-2022-JP .jis + AddLanguage kr .kr + AddCharset ISO-2022-KR .iso-kr + AddLanguage nn .nn + AddLanguage no .no + AddLanguage pl .po + AddCharset ISO-8859-2 .iso-pl + AddLanguage pt .pt + AddLanguage pt-br .pt-br + AddLanguage ltz .lu + AddLanguage ca .ca + AddLanguage es .es + AddLanguage sv .sv + AddLanguage cs .cz .cs + AddLanguage ru .ru + AddLanguage zh-TW .zh-tw + AddCharset Big5 .Big5 .big5 + AddCharset WINDOWS-1251 .cp-1251 + AddCharset CP866 .cp866 + AddCharset ISO-8859-5 .iso-ru + AddCharset KOI8-R .koi8-r + AddCharset UCS-2 .ucs2 + AddCharset UCS-4 .ucs4 + AddCharset UTF-8 .utf8 + + # LanguagePriority allows you to give precedence to some languages + # in case of a tie during content negotiation. + # + # Just list the languages in decreasing order of preference. We have + # more or less alphabetized them here. You probably want to change this. + # + + LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw + + + # + # AddType allows you to tweak mime.types without actually editing it, or to + # make certain files to be certain types. + # + AddType application/x-tar .tgz + + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # Despite the name similarity, the following Add* directives have nothing + # to do with the FancyIndexing customization directives above. + # + AddEncoding x-compress .Z + AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + #AddType application/x-compress .Z + #AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers", + # actions unrelated to filetype. These can be either built into the server + # or added with the Action command (see below) + # + # If you want to use server side includes, or CGI outside + # ScriptAliased directories, uncomment the following lines. + # + # To use CGI scripts: + # + AddHandler cgi-script .cgi .pl + + # + # To use server-parsed HTML files + # + AddType text/html .shtml + AddHandler server-parsed .shtml + + # + # Uncomment the following line to enable Apache's send-asis HTTP file + # feature + # + AddHandler send-as-is asis + + # + # If you wish to use server-parsed imagemap files, use + # + #AddHandler imap-file map + + # + # To enable type maps, you might want to use + # + #AddHandler type-map var + + +# End of document types. + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# MetaDir: specifies the name of the directory in which Apache can find +# meta information files. These files contain additional HTTP headers +# to include when sending the document +# +#MetaDir .web + +# +# MetaSuffix: specifies the file name suffix for the file containing the +# meta information. +# +#MetaSuffix .meta + +# +# Customizable error response (Apache style) +# these come in three flavors +# +# 1) plain text +#ErrorDocument 500 "The server made a boo boo. +# n.b. the single leading (") marks it as text, it does not get output +# +# 2) local redirects +#ErrorDocument 404 /missing.html +# to redirect to local URL /missing.html +#ErrorDocument 404 /cgi-bin/missing_handler.pl +# N.B.: You can redirect to a script or a document using server-side-includes. +# +# 3) external redirects +#ErrorDocument 402 http://some.other-server.com/subscription_info.html +# N.B.: Many of the environment variables associated with the original +# request will *not* be available to such a script. + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +# +# ProxyRequests On + +# +# Order deny,allow +# Deny from all +# Allow from .your-domain.com +# + + # + # Enable/disable the handling of HTTP/1.1 "Via:" headers. + # ("Full" adds the server version; "Block" removes all outgoing Via: headers) + # Set to one of: Off | On | Full | Block + # +# ProxyVia On + + # + # To enable the cache as well, edit and uncomment the following lines: + # (no cacheing without CacheRoot) + # +# CacheRoot "/private/var/run/proxy" +# CacheSize 5 +# CacheGcInterval 4 +# CacheMaxExpire 24 +# CacheLastModifiedFactor 0.1 +# CacheDefaultExpire 1 +# NoCache a-domain.com another-domain.edu joes.garage-sale.com + +# +# End of proxy directives. + + + + # If php is turned on, we repsect .php and .phps files. + AddType application/x-httpd-php .php + AddType application/x-httpd-php .bat + AddType application/x-httpd-php-source .phps + + # Since most users will want index.php to work we + # also automatically enable index.php + + DirectoryIndex index.html index.php + + + + + RewriteEngine On + RewriteCond %{REQUEST_METHOD} ^TRACE + RewriteRule .* - [F] + + + + ServerName 127.0.0.1 + SSLEngine On + -- cgit v1.1