From f05b935882198ccf7d81675736e3aeb089c5113a Mon Sep 17 00:00:00 2001
From: Ben Murdoch <benm@google.com>
Date: Thu, 5 May 2011 14:36:32 +0100
Subject: Merge WebKit at r74534: Initial merge by git.

Change-Id: I6ccd1154fa1b19c2ec2a66878eb675738735f1eb
---
 .../android/flex-2.5.4a/MISC/VMS/descrip.mms       | 311 ---------------------
 1 file changed, 311 deletions(-)
 delete mode 100644 WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms

(limited to 'WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms')

diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms b/WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms
deleted file mode 100644
index 5b2859d..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms
+++ /dev/null
@@ -1,311 +0,0 @@
-# descrip.mms -- makefile for building `flex' using MMS or MMK on VMS;
-#	created manually from Makefile.in
-#						flex 2.5.0	Jan'95
-
-MAKEFILE  = descrip.mms		    # from [.MISC.VMS]
-MAKE	  = $(MMS) /Descr=$(MAKEFILE)
-MAKEFLAGS = $(MMSQUALIFIERS)
-
-# Possible values for DEFS:
-# "VMS" -- used just to make sure parentheses aren't empty;
-# For flex to always generate 8-bit scanners, append
-# ,"DEFAULT_CSIZE=256" inside /Define=() of DEFS.
-
-DEFS	  = /Define=("VMS")
-LDFLAGS	  = /noMap
-
-# compiler handling
-.ifdef GNUC
-CC	  = gcc
-GCCINIT	  = 	! SET COMMAND GNU_CC:[000000]GCC
-CFLAGS	  = /noList/Opt=2/Debug/noVerbose
-LIBS	  = gnu_cc:[000000]gcclib.olb/Library, sys$library:vaxcrtl.olb/Library
-C_CHOICE  = "GNUC=1"
-.else		! not GNU C
-CC	  = cc
-GCCINIT	  =
-.ifdef DECC
-CFLAGS	  = /noList/Prefix=All
-LIBS	  =
-C_CHOICE  = "DECC=1"
-.else		! not DEC C; assume VAX C
-CFLAGS	  = /noList/Optimize=noInline
-LIBS	  = sys$share:vaxcrtl.exe/Shareable
-C_CHOICE  = "VAXC=1"
-.endif
-.endif
-
-# parser handling
-#	mms/macro=("xxxC=1","zzz_parser=1"), where "zzz_parser" is
-#	either "bison_parser" or "byacc_parser" or "yacc_parser",
-#	otherwise assumed to be "no_parser"; and where "xxxC=1" is
-#	either "VAXC=1", "GNUC=1", or "DECC=1" as above
-.ifdef bison_parser
-YACC	  = bison
-YACCFLAGS = /Defines/Fixed_Outfiles
-YACCINIT  = set command gnu_bison:[000000]bison
-ALLOCA	  = ,[]alloca.obj		# note leading comma
-.else
-YACCFLAGS = -d
-YACCINIT  =
-ALLOCA	  =
-.ifdef byacc_parser
-YACC	  = byacc
-.else
-.ifdef yacc_parser
-YACC	  = yacc
-.else
-#	none of bison, byacc, or yacc specified
-.ifdef no_parser
-.else
-no_parser=1
-.endif	#<none>
-.endif	#yacc
-.endif	#byacc
-.endif	#bison
-
-# VMS-specific hackery
-ECHO	  = write sys$output		# requires single quoted arg
-COPY	  = copy_			#
-MOVE	  = rename_/New_Vers		# within same device only
-MUNG	  = search_/Exact/Match=NOR	# to strip unwanted `#module' directive
-NOOP	  = continue			# non-empty command that does nothing
-PURGE	  = purge_/noConfirm/noLog	# relatively quiet file removal
-REMOVE	  = delete_/noConfirm/noLog	# ditto
-TOUCH	  = append_/New _NL:		# requires single file arg
-TPU	  = edit_/TPU/noJournal/noDisplay/noSection
-
-# You can define this to be "lex.exe" if you want to replace lex at your site.
-FLEX	=flex.exe
-#	note: there should be no whitespace between `=' and the name,
-#	or else $(FLEX_EXEC) below will not function properly.
-FLEXLIB	  = flexlib.olb
-
-# You normally do not need to modify anything below this point.
-# ------------------------------------------------------------
-
-VMSDIR	  = [.MISC.VMS]
-MISCDIR	  = [.MISC]
-CURDIR	  = sys$disk:[]
-
-CPPFLAGS  = $(DEFS)/Include=[]
-LIBOPT	  = $(CURDIR)crtl.opt		# run-time library(s)
-ID_OPT	  = $(CURDIR)ident.opt		# version identification
-
-.SUFFIXES :	# avoid overhead of umpteen built-in rules
-.SUFFIXES : .obj .c
-
-.c.obj :
-	$(CC)$(CFLAGS)$(CPPFLAGS) $<
-
-VMSHDRS = $(VMSDIR)vms-conf.h	    # copied to []config.h
-VMSSRCS = $(VMSDIR)vms-code.c	    # copied to []vms-code.c
-VMSOBJS = ,vms-code.obj		    # note leading comma
-
-HEADERS = flexdef.h version.h
-
-SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \
-	scan.l skel.c sym.c tblcmp.c yylex.c
-OBJECTS = ccl.obj,dfa.obj,ecs.obj,gen.obj,main.obj,misc.obj,nfa.obj,parse.obj,\
-	scan.obj,skel.obj,sym.obj,tblcmp.obj,yylex.obj $(VMSOBJS) $(ALLOCA)
-
-LIBSRCS = libmain.c libyywrap.c
-LIBOBJS = libmain.obj,libyywrap.obj
-
-LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
-	scan.c skel.c sym.c tblcmp.c yylex.c
-
-DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \
-	configure.in conf.in Makefile.in mkskel.sh flex.skl \
-	$(HEADERS) $(SOURCES) $(LIBSRCS) MISC \
-	flex.1 scan.c install.sh mkinstalldirs configure
-
-DIST_NAME = flex
-
-# flex options to use when generating scan.c from scan.l
-COMPRESSION =
-PERF_REPORT = -p
-# which "flex" to use to generate scan.c from scan.l
-FLEX_EXEC   = mcr $(CURDIR)$(FLEX)
-FLEX_FLAGS  = -t $(PERF_REPORT) #$(COMPRESSION)
-
-MARKER	= make.bootstrap
-
-##### targets start here #####
-
-all : $(FLEX) flex.doc
-	@ $(NOOP)
-
-install : $(FLEX) flex.doc flex.skl $(FLEXLIB) FlexLexer.h
-	@ $(ECHO) "-- Installation must be done manually."
-	@ $(ECHO) "   $+"
-
-.ifdef GCCINIT
-.FIRST
-	$(GCCINIT)
-
-.endif	#GCCINIT
-
-flex : $(FLEX)
-	@ $(NOOP)
-
-$(FLEX) : $(MARKER) $(OBJECTS) $(FLEXLIB) $(LIBOPT) $(ID_OPT)
-	$(LINK)/Exe=$(FLEX) $(LDFLAGS)\
- $(OBJECTS),$(FLEXLIB)/Lib,$(LIBOPT)/Opt,$(ID_OPT)/Opt
-
-$(MARKER) : initscan.c
-	@- if f$search("scan.c").nes."" then $(REMOVE) scan.c;*
-	$(COPY) initscan.c scan.c
-	@ $(TOUCH) $(MARKER)
-
-parse.c : parse.y
-	@- if f$search("y_tab.%").nes."" then $(REMOVE) y_tab.%;*
-.ifdef no_parser
-	$(COPY) $(MISCDIR)parse.% $(CURDIR)y_tab.*
-.else
-	$(YACCINIT)
-	$(YACC) $(YACCFLAGS) parse.y
-.endif
-	$(MUNG) y_tab.c "#module","#line" /Output=parse.c
-	@- $(REMOVE) y_tab.c;*
-	$(MOVE) y_tab.h parse.h
-
-parse.h : parse.c
-	@ $(TOUCH) parse.h
-
-scan.c : scan.l
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) scan.l > scan.c
-
-scan.obj : scan.c parse.h flexdef.h config.h
-yylex.obj : yylex.c parse.h flexdef.h config.h
-
-skel.c : flex.skl $(VMSDIR)mkskel.tpu
-	$(TPU) /Command=$(VMSDIR)mkskel.tpu flex.skl /Output=skel.c
-
-main.obj : main.c flexdef.h config.h version.h
-ccl.obj : ccl.c flexdef.h config.h
-dfa.obj : dfa.c flexdef.h config.h
-ecs.obj : ecs.c flexdef.h config.h
-gen.obj : gen.c flexdef.h config.h
-misc.obj : misc.c flexdef.h config.h
-nfa.obj : nfa.c flexdef.h config.h
-parse.obj : parse.c flexdef.h config.h
-skel.obj : skel.c flexdef.h config.h
-sym.obj : sym.c flexdef.h config.h
-tblcmp.obj : tblcmp.c flexdef.h config.h
-vms-code.obj : vms-code.c flexdef.h config.h
-
-[]alloca.obj : alloca.c
-	$(CC)$(CFLAGS)/Define=("STACK_DIRECTION=-1","xmalloc=yy_flex_xmalloc") alloca.c
-
-alloca.c : $(MISCDIR)alloca.c
-	$(COPY) $(MISCDIR)alloca.c alloca.c
-
-config.h : $(VMSDIR)vms-conf.h
-	$(COPY) $(VMSDIR)vms-conf.h config.h
-
-vms-code.c : $(VMSDIR)vms-code.c
-	$(COPY) $(VMSDIR)vms-code.c vms-code.c
-
-test : check
-	@ $(NOOP)
-check : $(FLEX)
-	@ $(ECHO) ""
-	@ $(ECHO) "  Checking with COMPRESSION="$(COMPRESSION)""
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) scan.l > scan.chk
-	diff_/Output=_NL:/Maximum_Diff=1 scan.c scan.chk
-
-bigcheck :
-	@- if f$search("scan.c").nes."" then $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-C""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-Ce""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-Cm""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-f""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-Cfea""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-CFer""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-l""","PERF_REPORT=") check
-	@- $(REMOVE) scan.c;*,scan.chk;*
-	$(MAKE)$(MAKEFLAGS) $(FLEX)
-	@- $(PURGE) scan.obj
-	@ $(ECHO) "All checks successful"
-
-$(FLEXLIB) : $(LIBOBJS)
-	library/Obj $(FLEXLIB)/Create $(LIBOBJS)/Insert
-	@ if f$search("$(FLEXLIB);-1").nes."" then $(PURGE) $(FLEXLIB)
-
-# We call it .doc instead of .man, to lessen culture shock.  :-}
-#	If MISC/flex.man is out of date relative to flex.1, there's
-#	not much we can do about it with the tools readily available.
-flex.doc : flex.1
-	@ if f$search("$(MISCDIR)flex.man").eqs."" then \
-		$(COPY) flex.1 $(MISCDIR)flex.man
-	$(COPY) $(MISCDIR)flex.man flex.doc
-
-#
-#	This is completely VMS-specific...
-#
-
-# Linker options file specifying run-time library(s) to link against;
-# choice depends on which C compiler is used, and might be empty.
-$(LIBOPT) : $(MAKEFILE)
-	@ open/Write optfile $(LIBOPT)
-	@ write optfile "$(LIBS)"
-	@ close optfile
-
-# Linker options file putting the version number where the ANALYZE/IMAGE
-# command will be able to find and report it; assumes that the first line
-# of version.h has the version number enclosed within the first and second
-# double quotes on it [as in ``#define FLEX_VERSION "2.5.0"''].
-$(ID_OPT) : version.h
-	@ version = "# flex ""2.5"""	!default, overridden by version.h
-	@- open/Read hfile version.h
-	@- read hfile version
-	@- close/noLog hfile
-	@ version = f$element(1,"""",version)
-	@ open/Write optfile $(ID_OPT)
-	@ write optfile "identification=""flex ''version'"""
-	@ close optfile
-
-
-#
-#	This is the only stuff moderately useful from the remainder
-#	of Makefile.in...
-#
-
-mostlyclean :
-	@- if f$search("scan.chk").nes."" then $(REMOVE) scan.chk;*
-	@- if f$search("*.obj;-1").nes."" then $(PURGE) *.obj
-	@- if f$search("*.exe;-1").nes."" then $(PURGE) *.exe
-	@- if f$search("*.opt;-1").nes."" then $(PURGE) *.opt
-
-clean : mostlyclean
-	@- if f$search("*.obj").nes."" then $(REMOVE) *.obj;*
-	@- if f$search("parse.h").nes."" then $(REMOVE) parse.h;*
-	@- if f$search("parse.c").nes."" then $(REMOVE) parse.c;*
-	@- if f$search("alloca.c").nes."" .and.-
-	 f$search("$(MISCDIR)alloca.c").nes."" then $(REMOVE) alloca.c;*
-	@- if f$search("$(LIBOPT)").nes."" then $(REMOVE) $(LIBOPT);*
-	@- if f$search("$(ID_OPT)").nes."" then $(REMOVE) $(ID_OPT);*
-
-distclean : clean
-	@- if f$search("$(MARKER)").nes."" then $(REMOVE) $(MARKER);*
-	@- if f$search("$(FLEX)").nes."" then $(REMOVE) $(FLEX);*
-	@- if f$search("$(FLEXLIB)").nes."" then $(REMOVE) $(FLEXLIB);*
-	@- if f$search("flex.doc").nes."" then $(REMOVE) flex.doc;*
-	@- if f$search("scan.c").nes."" then $(REMOVE) scan.c;*
-	@- if f$search("vms-code.c").nes."" .and.-
-	 f$search("$(VMSDIR)vms-code.c").nes."" then $(REMOVE) vms-code.c;*
-	@- if f$search("config.h").nes."" .and.-
-	 f$search("$(VMSDIR)vms-conf.h").nes."" then $(REMOVE) config.h;*
-#	@- if f$search("descrip.mms").nes."" .and.-
-#	 f$search("$(VMSDIR)descrip.mms").nes."" then $(REMOVE) descrip.mms;*
-
-realclean : distclean
-	@- if f$search("skel.c").nes."" then $(REMOVE) skel.c;*
-
-- 
cgit v1.1