diff options
Diffstat (limited to 'libvideoeditor/vss/src/M4AIR_API.c')
-rwxr-xr-x | libvideoeditor/vss/src/M4AIR_API.c | 968 |
1 files changed, 0 insertions, 968 deletions
diff --git a/libvideoeditor/vss/src/M4AIR_API.c b/libvideoeditor/vss/src/M4AIR_API.c deleted file mode 100755 index 62897b0..0000000 --- a/libvideoeditor/vss/src/M4AIR_API.c +++ /dev/null @@ -1,968 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -/** - ************************************************************************* - * @file M4AIR_API.c - * @brief Area of Interest Resizer API - ************************************************************************* - */ - -#define M4AIR_YUV420_FORMAT_SUPPORTED -#define M4AIR_YUV420A_FORMAT_SUPPORTED - -/************************* COMPILATION CHECKS ***************************/ -#ifndef M4AIR_YUV420_FORMAT_SUPPORTED -#ifndef M4AIR_BGR565_FORMAT_SUPPORTED -#ifndef M4AIR_RGB565_FORMAT_SUPPORTED -#ifndef M4AIR_BGR888_FORMAT_SUPPORTED -#ifndef M4AIR_RGB888_FORMAT_SUPPORTED -#ifndef M4AIR_JPG_FORMAT_SUPPORTED - -#error "Please define at least one input format for the AIR component" - -#endif -#endif -#endif -#endif -#endif -#endif - -/******************************* INCLUDES *******************************/ -#include "M4OSA_Types.h" -#include "M4OSA_Error.h" -#include "M4OSA_CoreID.h" -#include "M4OSA_Mutex.h" -#include "M4OSA_Memory.h" -#include "M4VIFI_FiltersAPI.h" -#include "M4AIR_API.h" - -/************************ M4AIR INTERNAL TYPES DEFINITIONS ***********************/ - -/** - ****************************************************************************** - * enum M4AIR_States - * @brief The following enumeration defines the internal states of the AIR. - ****************************************************************************** - */ -typedef enum -{ - M4AIR_kCreated, /**< State after M4AIR_create has been called */ - M4AIR_kConfigured /**< State after M4AIR_configure has been called */ -}M4AIR_States; - - -/** - ****************************************************************************** - * struct M4AIR_InternalContext - * @brief The following structure is the internal context of the AIR. - ****************************************************************************** - */ -typedef struct -{ - M4AIR_States m_state; /**< Internal state */ - M4AIR_InputFormatType m_inputFormat; /**< Input format like YUV420Planar, - RGB565, JPG, etc ... */ - M4AIR_Params m_params; /**< Current input Parameter of the processing */ - M4OSA_UInt32 u32_x_inc[4]; /**< ratio between input and ouput width for YUV */ - M4OSA_UInt32 u32_y_inc[4]; /**< ratio between input and ouput height for YUV */ - M4OSA_UInt32 u32_x_accum_start[4]; /**< horizontal initial accumulator value */ - M4OSA_UInt32 u32_y_accum_start[4]; /**< Vertical initial accumulator value */ - M4OSA_UInt32 u32_x_accum[4]; /**< save of horizontal accumulator value */ - M4OSA_UInt32 u32_y_accum[4]; /**< save of vertical accumulator value */ - M4OSA_UInt8* pu8_data_in[4]; /**< Save of input plane pointers - in case of stripe mode */ - M4OSA_UInt32 m_procRows; /**< Number of processed rows, - used in stripe mode only */ - M4OSA_Bool m_bOnlyCopy; /**< Flag to know if we just perform a copy - or a bilinear interpolation */ - M4OSA_Bool m_bFlipX; /**< Depend on output orientation, used during - processing to revert processing order in X - coordinates */ - M4OSA_Bool m_bFlipY; /**< Depend on output orientation, used during - processing to revert processing order in Y - coordinates */ - M4OSA_Bool m_bRevertXY; /**< Depend on output orientation, used during - processing to revert X and Y processing order - (+-90° rotation) */ -}M4AIR_InternalContext; - -/********************************* MACROS *******************************/ -#define M4ERR_CHECK_NULL_RETURN_VALUE(retval, pointer)\ - if ((pointer) == M4OSA_NULL) return ((M4OSA_ERR)(retval)); - - -/********************** M4AIR PUBLIC API IMPLEMENTATION ********************/ -/** - ****************************************************************************** - * M4OSA_ERR M4AIR_create(M4OSA_Context* pContext,M4AIR_InputFormatType inputFormat) - * @brief This function initialize an instance of the AIR. - * @param pContext: (IN/OUT) Address of the context to create - * @param inputFormat: (IN) input format type. - * @return M4NO_ERROR: there is no error - * @return M4ERR_PARAMETER: pContext is M4OSA_NULL (debug only). Invalid formatType - * @return M4ERR_ALLOC: No more memory is available - ****************************************************************************** - */ -M4OSA_ERR M4AIR_create(M4OSA_Context* pContext,M4AIR_InputFormatType inputFormat) -{ - M4OSA_ERR err = M4NO_ERROR ; - M4AIR_InternalContext* pC = M4OSA_NULL ; - - /* Check that the address on the context is not NULL */ - M4ERR_CHECK_NULL_RETURN_VALUE(M4ERR_PARAMETER, pContext) ; - - *pContext = M4OSA_NULL ; - - /* Internal Context creation */ - pC = (M4AIR_InternalContext*)M4OSA_32bitAlignedMalloc(sizeof(M4AIR_InternalContext), - M4AIR,(M4OSA_Char *)"AIR internal context") ; - M4ERR_CHECK_NULL_RETURN_VALUE(M4ERR_ALLOC, pC) ; - - - /* Check if the input format is supported */ - switch(inputFormat) - { -#ifdef M4AIR_YUV420_FORMAT_SUPPORTED - case M4AIR_kYUV420P: - break ; -#endif -#ifdef M4AIR_YUV420A_FORMAT_SUPPORTED - case M4AIR_kYUV420AP: - break ; -#endif - default: - err = M4ERR_AIR_FORMAT_NOT_SUPPORTED; - goto M4AIR_create_cleanup ; - } - - /**< Save input format and update state */ - pC->m_inputFormat = inputFormat; - pC->m_state = M4AIR_kCreated; - - /* Return the context to the caller */ - *pContext = pC ; - - return M4NO_ERROR ; - -M4AIR_create_cleanup: - /* Error management : we destroy the context if needed */ - if(M4OSA_NULL != pC) - { - free(pC) ; - } - - *pContext = M4OSA_NULL ; - - return err ; -} - - - -/** - ****************************************************************************** - * M4OSA_ERR M4AIR_cleanUp(M4OSA_Context pContext) - * @brief This function destroys an instance of the AIR component - * @param pContext: (IN) Context identifying the instance to destroy - * @return M4NO_ERROR: there is no error - * @return M4ERR_PARAMETER: pContext is M4OSA_NULL (debug only). - * @return M4ERR_STATE: Internal state is incompatible with this function call. - ****************************************************************************** - */ -M4OSA_ERR M4AIR_cleanUp(M4OSA_Context pContext) -{ - M4AIR_InternalContext* pC = (M4AIR_InternalContext*)pContext ; - - M4ERR_CHECK_NULL_RETURN_VALUE(M4ERR_PARAMETER, pContext) ; - - /**< Check state */ - if((M4AIR_kCreated != pC->m_state)&&(M4AIR_kConfigured != pC->m_state)) - { - return M4ERR_STATE; - } - free(pC) ; - - return M4NO_ERROR ; - -} - - -/** - ****************************************************************************** - * M4OSA_ERR M4AIR_configure(M4OSA_Context pContext, M4AIR_Params* pParams) - * @brief This function will configure the AIR. - * @note It will set the input and output coordinates and sizes, - * and indicates if we will proceed in stripe or not. - * In case a M4AIR_get in stripe mode was on going, it will cancel this previous - * processing and reset the get process. - * @param pContext: (IN) Context identifying the instance - * @param pParams->m_bOutputStripe:(IN) Stripe mode. - * @param pParams->m_inputCoord: (IN) X,Y coordinates of the first valid pixel in input. - * @param pParams->m_inputSize: (IN) input ROI size. - * @param pParams->m_outputSize: (IN) output size. - * @return M4NO_ERROR: there is no error - * @return M4ERR_ALLOC: No more memory space to add a new effect. - * @return M4ERR_PARAMETER: pContext is M4OSA_NULL (debug only). - * @return M4ERR_AIR_FORMAT_NOT_SUPPORTED: the requested input format is not supported. - ****************************************************************************** - */ -M4OSA_ERR M4AIR_configure(M4OSA_Context pContext, M4AIR_Params* pParams) -{ - M4AIR_InternalContext* pC = (M4AIR_InternalContext*)pContext ; - M4OSA_UInt32 i,u32_width_in, u32_width_out, u32_height_in, u32_height_out; - M4OSA_UInt32 nb_planes; - - M4ERR_CHECK_NULL_RETURN_VALUE(M4ERR_PARAMETER, pContext) ; - - if(M4AIR_kYUV420AP == pC->m_inputFormat) - { - nb_planes = 4; - } - else - { - nb_planes = 3; - } - - /**< Check state */ - if((M4AIR_kCreated != pC->m_state)&&(M4AIR_kConfigured != pC->m_state)) - { - return M4ERR_STATE; - } - - /** Save parameters */ - pC->m_params = *pParams; - - /* Check for the input&output width and height are even */ - if( ((pC->m_params.m_inputSize.m_height)&0x1) || - ((pC->m_params.m_inputSize.m_height)&0x1)) - { - return M4ERR_AIR_ILLEGAL_FRAME_SIZE; - } - - if( ((pC->m_params.m_inputSize.m_width)&0x1) || - ((pC->m_params.m_inputSize.m_width)&0x1)) - { - return M4ERR_AIR_ILLEGAL_FRAME_SIZE; - } - if(((pC->m_params.m_inputSize.m_width) == (pC->m_params.m_outputSize.m_width)) - &&((pC->m_params.m_inputSize.m_height) == (pC->m_params.m_outputSize.m_height))) - { - /**< No resize in this case, we will just copy input in output */ - pC->m_bOnlyCopy = M4OSA_TRUE; - } - else - { - pC->m_bOnlyCopy = M4OSA_FALSE; - - /**< Initialize internal variables used for resize filter */ - for(i=0;i<nb_planes;i++) - { - - u32_width_in = ((i==0)||(i==3))?pC->m_params.m_inputSize.m_width:\ - (pC->m_params.m_inputSize.m_width+1)>>1; - u32_height_in = ((i==0)||(i==3))?pC->m_params.m_inputSize.m_height:\ - (pC->m_params.m_inputSize.m_height+1)>>1; - u32_width_out = ((i==0)||(i==3))?pC->m_params.m_outputSize.m_width:\ - (pC->m_params.m_outputSize.m_width+1)>>1; - u32_height_out = ((i==0)||(i==3))?pC->m_params.m_outputSize.m_height:\ - (pC->m_params.m_outputSize.m_height+1)>>1; - - /* Compute horizontal ratio between src and destination width.*/ - if (u32_width_out >= u32_width_in) - { - pC->u32_x_inc[i] = ((u32_width_in-1) * 0x10000) / (u32_width_out-1); - } - else - { - pC->u32_x_inc[i] = (u32_width_in * 0x10000) / (u32_width_out); - } - - /* Compute vertical ratio between src and destination height.*/ - if (u32_height_out >= u32_height_in) - { - pC->u32_y_inc[i] = ((u32_height_in - 1) * 0x10000) / (u32_height_out-1); - } - else - { - pC->u32_y_inc[i] = (u32_height_in * 0x10000) / (u32_height_out); - } - - /* - Calculate initial accumulator value : u32_y_accum_start. - u32_y_accum_start is coded on 15 bits, and represents a value between 0 and 0.5 - */ - if (pC->u32_y_inc[i] >= 0x10000) - { - /* - Keep the fractionnal part, assimung that integer part is coded - on the 16 high bits and the fractionnal on the 15 low bits - */ - pC->u32_y_accum_start[i] = pC->u32_y_inc[i] & 0xffff; - - if (!pC->u32_y_accum_start[i]) - { - pC->u32_y_accum_start[i] = 0x10000; - } - - pC->u32_y_accum_start[i] >>= 1; - } - else - { - pC->u32_y_accum_start[i] = 0; - } - /**< Take into account that Y coordinate can be odd - in this case we have to put a 0.5 offset - for U and V plane as there a 2 times sub-sampled vs Y*/ - if((pC->m_params.m_inputCoord.m_y&0x1)&&((i==1)||(i==2))) - { - pC->u32_y_accum_start[i] += 0x8000; - } - - /* - Calculate initial accumulator value : u32_x_accum_start. - u32_x_accum_start is coded on 15 bits, and represents a value between - 0 and 0.5 - */ - - if (pC->u32_x_inc[i] >= 0x10000) - { - pC->u32_x_accum_start[i] = pC->u32_x_inc[i] & 0xffff; - - if (!pC->u32_x_accum_start[i]) - { - pC->u32_x_accum_start[i] = 0x10000; - } - - pC->u32_x_accum_start[i] >>= 1; - } - else - { - pC->u32_x_accum_start[i] = 0; - } - /**< Take into account that X coordinate can be odd - in this case we have to put a 0.5 offset - for U and V plane as there a 2 times sub-sampled vs Y*/ - if((pC->m_params.m_inputCoord.m_x&0x1)&&((i==1)||(i==2))) - { - pC->u32_x_accum_start[i] += 0x8000; - } - } - } - - /**< Reset variable used for stripe mode */ - pC->m_procRows = 0; - - /**< Initialize var for X/Y processing order according to orientation */ - pC->m_bFlipX = M4OSA_FALSE; - pC->m_bFlipY = M4OSA_FALSE; - pC->m_bRevertXY = M4OSA_FALSE; - switch(pParams->m_outputOrientation) - { - case M4COMMON_kOrientationTopLeft: - break; - case M4COMMON_kOrientationTopRight: - pC->m_bFlipX = M4OSA_TRUE; - break; - case M4COMMON_kOrientationBottomRight: - pC->m_bFlipX = M4OSA_TRUE; - pC->m_bFlipY = M4OSA_TRUE; - break; - case M4COMMON_kOrientationBottomLeft: - pC->m_bFlipY = M4OSA_TRUE; - break; - case M4COMMON_kOrientationLeftTop: - pC->m_bRevertXY = M4OSA_TRUE; - break; - case M4COMMON_kOrientationRightTop: - pC->m_bRevertXY = M4OSA_TRUE; - pC->m_bFlipY = M4OSA_TRUE; - break; - case M4COMMON_kOrientationRightBottom: - pC->m_bRevertXY = M4OSA_TRUE; - pC->m_bFlipX = M4OSA_TRUE; - pC->m_bFlipY = M4OSA_TRUE; - break; - case M4COMMON_kOrientationLeftBottom: - pC->m_bRevertXY = M4OSA_TRUE; - pC->m_bFlipX = M4OSA_TRUE; - break; - default: - return M4ERR_PARAMETER; - } - /**< Update state */ - pC->m_state = M4AIR_kConfigured; - - return M4NO_ERROR ; -} - - -/** - ****************************************************************************** - * M4OSA_ERR M4AIR_get(M4OSA_Context pContext, M4VIFI_ImagePlane* pIn, M4VIFI_ImagePlane* pOut) - * @brief This function will provide the requested resized area of interest according to - * settings provided in M4AIR_configure. - * @note In case the input format type is JPEG, input plane(s) - * in pIn is not used. In normal mode, dimension specified in output plane(s) structure - * must be the same than the one specified in M4AIR_configure. In stripe mode, only the - * width will be the same, height will be taken as the stripe height (typically 16). - * In normal mode, this function is call once to get the full output picture. - * In stripe mode, it is called for each stripe till the whole picture has been - * retrieved,and the position of the output stripe in the output picture - * is internally incremented at each step. - * Any call to M4AIR_configure during stripe process will reset this one to the - * beginning of the output picture. - * @param pContext: (IN) Context identifying the instance - * @param pIn: (IN) Plane structure containing input Plane(s). - * @param pOut: (IN/OUT) Plane structure containing output Plane(s). - * @return M4NO_ERROR: there is no error - * @return M4ERR_ALLOC: No more memory space to add a new effect. - * @return M4ERR_PARAMETER: pContext is M4OSA_NULL (debug only). - ****************************************************************************** - */ -M4OSA_ERR M4AIR_get(M4OSA_Context pContext, M4VIFI_ImagePlane* pIn, M4VIFI_ImagePlane* pOut) -{ - M4AIR_InternalContext* pC = (M4AIR_InternalContext*)pContext ; - M4OSA_UInt32 i,j,k,u32_x_frac,u32_y_frac,u32_x_accum,u32_y_accum,u32_shift; - M4OSA_UInt8 *pu8_data_in, *pu8_data_in_org, *pu8_data_in_tmp, *pu8_data_out; - M4OSA_UInt8 *pu8_src_top; - M4OSA_UInt8 *pu8_src_bottom; - M4OSA_UInt32 u32_temp_value; - M4OSA_Int32 i32_tmp_offset; - M4OSA_UInt32 nb_planes; - - - - M4ERR_CHECK_NULL_RETURN_VALUE(M4ERR_PARAMETER, pContext) ; - - /**< Check state */ - if(M4AIR_kConfigured != pC->m_state) - { - return M4ERR_STATE; - } - - if(M4AIR_kYUV420AP == pC->m_inputFormat) - { - nb_planes = 4; - } - else - { - nb_planes = 3; - } - - /**< Loop on each Plane */ - for(i=0;i<nb_planes;i++) - { - - /* Set the working pointers at the beginning of the input/output data field */ - - u32_shift = ((i==0)||(i==3))?0:1; /**< Depend on Luma or Chroma */ - - if((M4OSA_FALSE == pC->m_params.m_bOutputStripe)\ - ||((M4OSA_TRUE == pC->m_params.m_bOutputStripe)&&(0 == pC->m_procRows))) - { - /**< For input, take care about ROI */ - pu8_data_in = pIn[i].pac_data + pIn[i].u_topleft \ - + (pC->m_params.m_inputCoord.m_x>>u32_shift) - + (pC->m_params.m_inputCoord.m_y >> u32_shift) * pIn[i].u_stride; - - /** Go at end of line/column in case X/Y scanning is flipped */ - if(M4OSA_TRUE == pC->m_bFlipX) - { - pu8_data_in += ((pC->m_params.m_inputSize.m_width)>>u32_shift) -1 ; - } - if(M4OSA_TRUE == pC->m_bFlipY) - { - pu8_data_in += ((pC->m_params.m_inputSize.m_height>>u32_shift) -1)\ - * pIn[i].u_stride; - } - - /**< Initialize accumulators in case we are using it (bilinear interpolation) */ - if( M4OSA_FALSE == pC->m_bOnlyCopy) - { - pC->u32_x_accum[i] = pC->u32_x_accum_start[i]; - pC->u32_y_accum[i] = pC->u32_y_accum_start[i]; - } - - } - else - { - /**< In case of stripe mode for other than first stripe, we need to recover input - pointer from internal context */ - pu8_data_in = pC->pu8_data_in[i]; - } - - /**< In every mode, output data are at the beginning of the output plane */ - pu8_data_out = pOut[i].pac_data + pOut[i].u_topleft; - - /**< Initialize input offset applied after each pixel */ - if(M4OSA_FALSE == pC->m_bFlipY) - { - i32_tmp_offset = pIn[i].u_stride; - } - else - { - i32_tmp_offset = -pIn[i].u_stride; - } - - /**< In this case, no bilinear interpolation is needed as input and output dimensions - are the same */ - if( M4OSA_TRUE == pC->m_bOnlyCopy) - { - /**< No +-90° rotation */ - if(M4OSA_FALSE == pC->m_bRevertXY) - { - /**< No flip on X abscissa */ - if(M4OSA_FALSE == pC->m_bFlipX) - { - /**< Loop on each row */ - for(j=0;j<pOut[i].u_height;j++) - { - /**< Copy one whole line */ - memcpy((void *)pu8_data_out, (void *)pu8_data_in, - pOut[i].u_width); - - /**< Update pointers */ - pu8_data_out += pOut[i].u_stride; - if(M4OSA_FALSE == pC->m_bFlipY) - { - pu8_data_in += pIn[i].u_stride; - } - else - { - pu8_data_in -= pIn[i].u_stride; - } - } - } - else - { - /**< Loop on each row */ - for(j=0;j<pOut[i].u_height;j++) - { - /**< Loop on each pixel of 1 row */ - for(k=0;k<pOut[i].u_width;k++) - { - *pu8_data_out++ = *pu8_data_in--; - } - - /**< Update pointers */ - pu8_data_out += (pOut[i].u_stride - pOut[i].u_width); - - pu8_data_in += pOut[i].u_width + i32_tmp_offset; - - } - } - } - /**< Here we have a +-90° rotation */ - else - { - - /**< Loop on each row */ - for(j=0;j<pOut[i].u_height;j++) - { - pu8_data_in_tmp = pu8_data_in; - - /**< Loop on each pixel of 1 row */ - for(k=0;k<pOut[i].u_width;k++) - { - *pu8_data_out++ = *pu8_data_in_tmp; - - /**< Update input pointer in order to go to next/past line */ - pu8_data_in_tmp += i32_tmp_offset; - } - - /**< Update pointers */ - pu8_data_out += (pOut[i].u_stride - pOut[i].u_width); - if(M4OSA_FALSE == pC->m_bFlipX) - { - pu8_data_in ++; - } - else - { - pu8_data_in --; - } - } - } - } - /**< Bilinear interpolation */ - else - { - - if(3 != i) /**< other than alpha plane */ - { - /**No +-90° rotation */ - if(M4OSA_FALSE == pC->m_bRevertXY) - { - - /**< Loop on each row */ - for(j=0;j<pOut[i].u_height;j++) - { - /* Vertical weight factor */ - u32_y_frac = (pC->u32_y_accum[i]>>12)&15; - - /* Reinit horizontal weight factor */ - u32_x_accum = pC->u32_x_accum_start[i]; - - - - if(M4OSA_TRUE == pC->m_bFlipX) - { - - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - - u32_x_frac = (u32_x_accum >> 12)&15; /* Fraction of Horizontal - weight factor */ - - pu8_src_top = (pu8_data_in - (u32_x_accum >> 16)) -1 ; - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[1]*(16-u32_x_frac) + - pu8_src_top[0]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[1]*(16-u32_x_frac) + - pu8_src_bottom[0]*u32_x_frac)*u32_y_frac )>>8); - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update horizontal accumulator */ - u32_x_accum += pC->u32_x_inc[i]; - } - } - - else - { - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - u32_x_frac = (u32_x_accum >> 12)&15; /* Fraction of Horizontal - weight factor */ - - pu8_src_top = pu8_data_in + (u32_x_accum >> 16); - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[0]*(16-u32_x_frac) + - pu8_src_top[1]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[0]*(16-u32_x_frac) + - pu8_src_bottom[1]*u32_x_frac)*u32_y_frac )>>8); - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update horizontal accumulator */ - u32_x_accum += pC->u32_x_inc[i]; - } - - } - - pu8_data_out += pOut[i].u_stride - pOut[i].u_width; - - /* Update vertical accumulator */ - pC->u32_y_accum[i] += pC->u32_y_inc[i]; - if (pC->u32_y_accum[i]>>16) - { - pu8_data_in = pu8_data_in + (pC->u32_y_accum[i] >> 16) * i32_tmp_offset; - pC->u32_y_accum[i] &= 0xffff; - } - } - } - /** +-90° rotation */ - else - { - pu8_data_in_org = pu8_data_in; - - /**< Loop on each output row */ - for(j=0;j<pOut[i].u_height;j++) - { - /* horizontal weight factor */ - u32_x_frac = (pC->u32_x_accum[i]>>12)&15; - - /* Reinit accumulator */ - u32_y_accum = pC->u32_y_accum_start[i]; - - if(M4OSA_TRUE == pC->m_bFlipX) - { - - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - - u32_y_frac = (u32_y_accum >> 12)&15; /* Vertical weight factor */ - - - pu8_src_top = (pu8_data_in - (pC->u32_x_accum[i] >> 16)) - 1; - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[1]*(16-u32_x_frac) + - pu8_src_top[0]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[1]*(16-u32_x_frac) + - pu8_src_bottom[0]*u32_x_frac)*u32_y_frac )>>8); - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update vertical accumulator */ - u32_y_accum += pC->u32_y_inc[i]; - if (u32_y_accum>>16) - { - pu8_data_in = pu8_data_in + (u32_y_accum >> 16) * i32_tmp_offset; - u32_y_accum &= 0xffff; - } - - } - } - else - { - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - - u32_y_frac = (u32_y_accum >> 12)&15; /* Vertical weight factor */ - - pu8_src_top = pu8_data_in + (pC->u32_x_accum[i] >> 16); - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[0]*(16-u32_x_frac) + - pu8_src_top[1]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[0]*(16-u32_x_frac) + - pu8_src_bottom[1]*u32_x_frac)*u32_y_frac )>>8); - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update vertical accumulator */ - u32_y_accum += pC->u32_y_inc[i]; - if (u32_y_accum>>16) - { - pu8_data_in = pu8_data_in + (u32_y_accum >> 16) * i32_tmp_offset; - u32_y_accum &= 0xffff; - } - } - } - pu8_data_out += pOut[i].u_stride - pOut[i].u_width; - - /* Update horizontal accumulator */ - pC->u32_x_accum[i] += pC->u32_x_inc[i]; - - pu8_data_in = pu8_data_in_org; - } - - } - }/** 3 != i */ - else - { - /**No +-90° rotation */ - if(M4OSA_FALSE == pC->m_bRevertXY) - { - - /**< Loop on each row */ - for(j=0;j<pOut[i].u_height;j++) - { - /* Vertical weight factor */ - u32_y_frac = (pC->u32_y_accum[i]>>12)&15; - - /* Reinit horizontal weight factor */ - u32_x_accum = pC->u32_x_accum_start[i]; - - - - if(M4OSA_TRUE == pC->m_bFlipX) - { - - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - - u32_x_frac = (u32_x_accum >> 12)&15; /* Fraction of Horizontal - weight factor */ - - pu8_src_top = (pu8_data_in - (u32_x_accum >> 16)) -1 ; - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[1]*(16-u32_x_frac) + - pu8_src_top[0]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[1]*(16-u32_x_frac) + - pu8_src_bottom[0]*u32_x_frac)*u32_y_frac )>>8); - - u32_temp_value= (u32_temp_value >> 7)*0xff; - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update horizontal accumulator */ - u32_x_accum += pC->u32_x_inc[i]; - } - } - - else - { - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - u32_x_frac = (u32_x_accum >> 12)&15; /* Fraction of Horizontal - weight factor */ - - pu8_src_top = pu8_data_in + (u32_x_accum >> 16); - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[0]*(16-u32_x_frac) + - pu8_src_top[1]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[0]*(16-u32_x_frac) + - pu8_src_bottom[1]*u32_x_frac)*u32_y_frac )>>8); - - u32_temp_value= (u32_temp_value >> 7)*0xff; - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update horizontal accumulator */ - u32_x_accum += pC->u32_x_inc[i]; - } - - } - - pu8_data_out += pOut[i].u_stride - pOut[i].u_width; - - /* Update vertical accumulator */ - pC->u32_y_accum[i] += pC->u32_y_inc[i]; - if (pC->u32_y_accum[i]>>16) - { - pu8_data_in = pu8_data_in + (pC->u32_y_accum[i] >> 16) * i32_tmp_offset; - pC->u32_y_accum[i] &= 0xffff; - } - } - - } /**< M4OSA_FALSE == pC->m_bRevertXY */ - /** +-90° rotation */ - else - { - pu8_data_in_org = pu8_data_in; - - /**< Loop on each output row */ - for(j=0;j<pOut[i].u_height;j++) - { - /* horizontal weight factor */ - u32_x_frac = (pC->u32_x_accum[i]>>12)&15; - - /* Reinit accumulator */ - u32_y_accum = pC->u32_y_accum_start[i]; - - if(M4OSA_TRUE == pC->m_bFlipX) - { - - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - - u32_y_frac = (u32_y_accum >> 12)&15; /* Vertical weight factor */ - - - pu8_src_top = (pu8_data_in - (pC->u32_x_accum[i] >> 16)) - 1; - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[1]*(16-u32_x_frac) + - pu8_src_top[0]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[1]*(16-u32_x_frac) + - pu8_src_bottom[0]*u32_x_frac)*u32_y_frac )>>8); - - u32_temp_value= (u32_temp_value >> 7)*0xff; - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update vertical accumulator */ - u32_y_accum += pC->u32_y_inc[i]; - if (u32_y_accum>>16) - { - pu8_data_in = pu8_data_in + (u32_y_accum >> 16) * i32_tmp_offset; - u32_y_accum &= 0xffff; - } - - } - } - else - { - /**< Loop on each output pixel in a row */ - for(k=0;k<pOut[i].u_width;k++) - { - - u32_y_frac = (u32_y_accum >> 12)&15; /* Vertical weight factor */ - - pu8_src_top = pu8_data_in + (pC->u32_x_accum[i] >> 16); - - pu8_src_bottom = pu8_src_top + i32_tmp_offset; - - /* Weighted combination */ - u32_temp_value = (M4VIFI_UInt8)(((pu8_src_top[0]*(16-u32_x_frac) + - pu8_src_top[1]*u32_x_frac)*(16-u32_y_frac) + - (pu8_src_bottom[0]*(16-u32_x_frac) + - pu8_src_bottom[1]*u32_x_frac)*u32_y_frac )>>8); - - u32_temp_value= (u32_temp_value >> 7)*0xff; - - *pu8_data_out++ = (M4VIFI_UInt8)u32_temp_value; - - /* Update vertical accumulator */ - u32_y_accum += pC->u32_y_inc[i]; - if (u32_y_accum>>16) - { - pu8_data_in = pu8_data_in + (u32_y_accum >> 16) * i32_tmp_offset; - u32_y_accum &= 0xffff; - } - } - } - pu8_data_out += pOut[i].u_stride - pOut[i].u_width; - - /* Update horizontal accumulator */ - pC->u32_x_accum[i] += pC->u32_x_inc[i]; - - pu8_data_in = pu8_data_in_org; - - } - } /**< M4OSA_TRUE == pC->m_bRevertXY */ - }/** 3 == i */ - } - /**< In case of stripe mode, save current input pointer */ - if(M4OSA_TRUE == pC->m_params.m_bOutputStripe) - { - pC->pu8_data_in[i] = pu8_data_in; - } - } - - /**< Update number of processed rows, reset it if we have finished - with the whole processing */ - pC->m_procRows += pOut[0].u_height; - if(M4OSA_FALSE == pC->m_bRevertXY) - { - if(pC->m_params.m_outputSize.m_height <= pC->m_procRows) pC->m_procRows = 0; - } - else - { - if(pC->m_params.m_outputSize.m_width <= pC->m_procRows) pC->m_procRows = 0; - } - - return M4NO_ERROR ; - -} - - - |