/* * Copyright (C) 2013 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef ANDROID_SERVERS_CAMERA3DEVICE_H #define ANDROID_SERVERS_CAMERA3DEVICE_H #include #include #include #include #include #include #include #include #include #include "common/CameraDeviceBase.h" #include "device3/StatusTracker.h" /** * Function pointer types with C calling convention to * use for HAL callback functions. */ extern "C" { typedef void (callbacks_process_capture_result_t)( const struct camera3_callback_ops *, const camera3_capture_result_t *); typedef void (callbacks_notify_t)( const struct camera3_callback_ops *, const camera3_notify_msg_t *); } namespace android { namespace camera3 { class Camera3Stream; class Camera3ZslStream; class Camera3OutputStreamInterface; class Camera3StreamInterface; } /** * CameraDevice for HAL devices with version CAMERA_DEVICE_API_VERSION_3_0 or higher. */ class Camera3Device : public CameraDeviceBase, private camera3_callback_ops { public: Camera3Device(int id); virtual ~Camera3Device(); /** * CameraDeviceBase interface */ virtual int getId() const; // Transitions to idle state on success. virtual status_t initialize(CameraModule *module); virtual status_t disconnect(); virtual status_t dump(int fd, const Vector &args); virtual const CameraMetadata& info() const; // Capture and setStreamingRequest will configure streams if currently in // idle state virtual status_t capture(CameraMetadata &request, int64_t *lastFrameNumber = NULL); virtual status_t captureList(const List &requests, int64_t *lastFrameNumber = NULL); virtual status_t setStreamingRequest(const CameraMetadata &request, int64_t *lastFrameNumber = NULL); virtual status_t setStreamingRequestList(const List &requests, int64_t *lastFrameNumber = NULL); virtual status_t clearStreamingRequest(int64_t *lastFrameNumber = NULL); virtual status_t waitUntilRequestReceived(int32_t requestId, nsecs_t timeout); // Actual stream creation/deletion is delayed until first request is submitted // If adding streams while actively capturing, will pause device before adding // stream, reconfiguring device, and unpausing. virtual status_t createStream(sp consumer, uint32_t width, uint32_t height, int format, android_dataspace dataSpace, camera3_stream_rotation_t rotation, int *id); virtual status_t createInputStream( uint32_t width, uint32_t height, int format, int *id); virtual status_t createZslStream( uint32_t width, uint32_t height, int depth, /*out*/ int *id, sp* zslStream); virtual status_t createReprocessStreamFromStream(int outputId, int *id); virtual status_t getStreamInfo(int id, uint32_t *width, uint32_t *height, uint32_t *format); virtual status_t setStreamTransform(int id, int transform); virtual status_t deleteStream(int id); virtual status_t deleteReprocessStream(int id); virtual status_t configureStreams(); virtual status_t getInputBufferProducer( sp *producer); virtual status_t createDefaultRequest(int templateId, CameraMetadata *request); // Transitions to the idle state on success virtual status_t waitUntilDrained(); virtual status_t setNotifyCallback(NotificationListener *listener); virtual bool willNotify3A(); virtual status_t waitForNextFrame(nsecs_t timeout); virtual status_t getNextResult(CaptureResult *frame); virtual status_t triggerAutofocus(uint32_t id); virtual status_t triggerCancelAutofocus(uint32_t id); virtual status_t triggerPrecaptureMetering(uint32_t id); virtual status_t pushReprocessBuffer(int reprocessStreamId, buffer_handle_t *buffer, wp listener); virtual status_t flush(int64_t *lastFrameNumber = NULL); virtual uint32_t getDeviceVersion(); virtual ssize_t getJpegBufferSize(uint32_t width, uint32_t height) const; // Methods called by subclasses void notifyStatus(bool idle); // updates from StatusTracker private: static const size_t kDumpLockAttempts = 10; static const size_t kDumpSleepDuration = 100000; // 0.10 sec static const size_t kInFlightWarnLimit = 20; static const nsecs_t kShutdownTimeout = 5000000000; // 5 sec static const nsecs_t kActiveTimeout = 500000000; // 500 ms struct RequestTrigger; // minimal jpeg buffer size: 256KB + blob header static const ssize_t kMinJpegBufferSize = 256 * 1024 + sizeof(camera3_jpeg_blob); // Constant to use for stream ID when one doesn't exist static const int NO_STREAM = -1; // A lock to enforce serialization on the input/configure side // of the public interface. // Only locked by public methods inherited from CameraDeviceBase. // Not locked by methods guarded by mOutputLock, since they may act // concurrently to the input/configure side of the interface. // Must be locked before mLock if both will be locked by a method Mutex mInterfaceLock; // The main lock on internal state Mutex mLock; // Camera device ID const int mId; /**** Scope for mLock ****/ camera3_device_t *mHal3Device; CameraMetadata mDeviceInfo; CameraMetadata mRequestTemplateCache[CAMERA3_TEMPLATE_COUNT]; uint32_t mDeviceVersion; struct Size { uint32_t width; uint32_t height; Size(uint32_t w = 0, uint32_t h = 0) : width(w), height(h){} }; // Map from format to size. Vector mSupportedOpaqueInputSizes; enum Status { STATUS_ERROR, STATUS_UNINITIALIZED, STATUS_UNCONFIGURED, STATUS_CONFIGURED, STATUS_ACTIVE } mStatus; Vector mRecentStatusUpdates; Condition mStatusChanged; // Tracking cause of fatal errors when in STATUS_ERROR String8 mErrorCause; // Mapping of stream IDs to stream instances typedef KeyedVector > StreamSet; StreamSet mOutputStreams; sp mInputStream; int mNextStreamId; bool mNeedConfig; int mDummyStreamId; // Whether to send state updates upstream // Pause when doing transparent reconfiguration bool mPauseStateNotify; // Need to hold on to stream references until configure completes. Vector > mDeletedStreams; // Whether the HAL will send partial result bool mUsePartialResult; // Number of partial results that will be delivered by the HAL. uint32_t mNumPartialResults; /**** End scope for mLock ****/ class CaptureRequest : public LightRefBase { public: CameraMetadata mSettings; sp mInputStream; Vector > mOutputStreams; CaptureResultExtras mResultExtras; }; typedef List > RequestList; status_t checkStatusOkToCaptureLocked(); status_t convertMetadataListToRequestListLocked( const List &metadataList, /*out*/ RequestList *requestList); status_t submitRequestsHelper(const List &requests, bool repeating, int64_t *lastFrameNumber = NULL); /** * Get the last request submitted to the hal by the request thread. * * Takes mLock. */ virtual CameraMetadata getLatestRequestLocked(); /** * Pause processing and flush everything, but don't tell the clients. * This is for reconfiguring outputs transparently when according to the * CameraDeviceBase interface we shouldn't need to. * Must be called with mLock and mInterfaceLock both held. */ status_t internalPauseAndWaitLocked(); /** * Resume work after internalPauseAndWaitLocked() * Must be called with mLock and mInterfaceLock both held. */ status_t internalResumeLocked(); /** * Wait until status tracker tells us we've transitioned to the target state * set, which is either ACTIVE when active==true or IDLE (which is any * non-ACTIVE state) when active==false. * * Needs to be called with mLock and mInterfaceLock held. This means there * can ever only be one waiter at most. * * During the wait mLock is released. * */ status_t waitUntilStateThenRelock(bool active, nsecs_t timeout); /** * Implementation of waitUntilDrained. On success, will transition to IDLE state. * * Need to be called with mLock and mInterfaceLock held. */ status_t waitUntilDrainedLocked(); /** * Do common work for setting up a streaming or single capture request. * On success, will transition to ACTIVE if in IDLE. */ sp setUpRequestLocked(const CameraMetadata &request); /** * Build a CaptureRequest request from the CameraDeviceBase request * settings. */ sp createCaptureRequest(const CameraMetadata &request); /** * Take the currently-defined set of streams and configure the HAL to use * them. This is a long-running operation (may be several hundered ms). */ status_t configureStreamsLocked(); /** * Add a dummy stream to the current stream set as a workaround for * not allowing 0 streams in the camera HAL spec. */ status_t addDummyStreamLocked(); /** * Remove a dummy stream if the current config includes real streams. */ status_t tryRemoveDummyStreamLocked(); /** * Set device into an error state due to some fatal failure, and set an * error message to indicate why. Only the first call's message will be * used. The message is also sent to the log. */ void setErrorState(const char *fmt, ...); void setErrorStateV(const char *fmt, va_list args); void setErrorStateLocked(const char *fmt, ...); void setErrorStateLockedV(const char *fmt, va_list args); /** * Debugging trylock/spin method * Try to acquire a lock a few times with sleeps between before giving up. */ bool tryLockSpinRightRound(Mutex& lock); /** * Helper function to determine if an input size for implementation defined * format is supported. */ bool isOpaqueInputSizeSupported(uint32_t width, uint32_t height); /** * Helper function to get the largest Jpeg resolution (in area) * Return Size(0, 0) if static metatdata is invalid */ Size getMaxJpegResolution() const; struct RequestTrigger { // Metadata tag number, e.g. android.control.aePrecaptureTrigger uint32_t metadataTag; // Metadata value, e.g. 'START' or the trigger ID int32_t entryValue; // The last part of the fully qualified path, e.g. afTrigger const char *getTagName() const { return get_camera_metadata_tag_name(metadataTag) ?: "NULL"; } // e.g. TYPE_BYTE, TYPE_INT32, etc. int getTagType() const { return get_camera_metadata_tag_type(metadataTag); } }; /** * Thread for managing capture request submission to HAL device. */ class RequestThread : public Thread { public: RequestThread(wp parent, sp statusTracker, camera3_device_t *hal3Device); void setNotifyCallback(NotificationListener *listener); /** * Call after stream (re)-configuration is completed. */ void configurationComplete(); /** * Set or clear the list of repeating requests. Does not block * on either. Use waitUntilPaused to wait until request queue * has emptied out. */ status_t setRepeatingRequests(const RequestList& requests, /*out*/ int64_t *lastFrameNumber = NULL); status_t clearRepeatingRequests(/*out*/ int64_t *lastFrameNumber = NULL); status_t queueRequestList(List > &requests, /*out*/ int64_t *lastFrameNumber = NULL); /** * Remove all queued and repeating requests, and pending triggers */ status_t clear(NotificationListener *listener, /*out*/ int64_t *lastFrameNumber = NULL); /** * Queue a trigger to be dispatched with the next outgoing * process_capture_request. The settings for that request only * will be temporarily rewritten to add the trigger tag/value. * Subsequent requests will not be rewritten (for this tag). */ status_t queueTrigger(RequestTrigger trigger[], size_t count); /** * Pause/unpause the capture thread. Doesn't block, so use * waitUntilPaused to wait until the thread is paused. */ void setPaused(bool paused); /** * Wait until thread processes the capture request with settings' * android.request.id == requestId. * * Returns TIMED_OUT in case the thread does not process the request * within the timeout. */ status_t waitUntilRequestProcessed(int32_t requestId, nsecs_t timeout); /** * Shut down the thread. Shutdown is asynchronous, so thread may * still be running once this method returns. */ virtual void requestExit(); /** * Get the latest request that was sent to the HAL * with process_capture_request. */ CameraMetadata getLatestRequest() const; protected: virtual bool threadLoop(); private: static int getId(const wp &device); status_t queueTriggerLocked(RequestTrigger trigger); // Mix-in queued triggers into this request int32_t insertTriggers(const sp &request); // Purge the queued triggers from this request, // restoring the old field values for those tags. status_t removeTriggers(const sp &request); // HAL workaround: Make sure a trigger ID always exists if // a trigger does status_t addDummyTriggerIds(const sp &request); static const nsecs_t kRequestTimeout = 50e6; // 50 ms // Waits for a request, or returns NULL if times out. sp waitForNextRequest(); // Return buffers, etc, for a request that couldn't be fully // constructed. The buffers will be returned in the ERROR state // to mark them as not having valid data. // All arguments will be modified. void cleanUpFailedRequest(camera3_capture_request_t &request, sp &nextRequest, Vector &outputBuffers); // Pause handling bool waitIfPaused(); void unpauseForNewRequests(); // Relay error to parent device object setErrorState void setErrorState(const char *fmt, ...); // If the input request is in mRepeatingRequests. Must be called with mRequestLock hold bool isRepeatingRequestLocked(const sp); wp mParent; wp mStatusTracker; camera3_device_t *mHal3Device; NotificationListener *mListener; const int mId; // The camera ID int mStatusId; // The RequestThread's component ID for // status tracking Mutex mRequestLock; Condition mRequestSignal; RequestList mRequestQueue; RequestList mRepeatingRequests; bool mReconfigured; // Used by waitIfPaused, waitForNextRequest, and waitUntilPaused Mutex mPauseLock; bool mDoPause; Condition mDoPauseSignal; bool mPaused; Condition mPausedSignal; sp mPrevRequest; int32_t mPrevTriggers; uint32_t mFrameNumber; mutable Mutex mLatestRequestMutex; Condition mLatestRequestSignal; // android.request.id for latest process_capture_request int32_t mLatestRequestId; CameraMetadata mLatestRequest; typedef KeyedVector TriggerMap; Mutex mTriggerMutex; TriggerMap mTriggerMap; TriggerMap mTriggerRemovedMap; TriggerMap mTriggerReplacedMap; uint32_t mCurrentAfTriggerId; uint32_t mCurrentPreCaptureTriggerId; int64_t mRepeatingLastFrameNumber; }; sp mRequestThread; /** * In-flight queue for tracking completion of capture requests. */ struct InFlightRequest { // Set by notify() SHUTTER call. nsecs_t shutterTimestamp; // Set by process_capture_result(). nsecs_t sensorTimestamp; int requestStatus; // Set by process_capture_result call with valid metadata bool haveResultMetadata; // Decremented by calls to process_capture_result with valid output // and input buffers int numBuffersLeft; CaptureResultExtras resultExtras; // If this request has any input buffer bool hasInputBuffer; // The last metadata that framework receives from HAL and // not yet send out because the shutter event hasn't arrived. // It's added by process_capture_result and sent when framework // receives the shutter event. CameraMetadata pendingMetadata; // Buffers are added by process_capture_result when output buffers // return from HAL but framework has not yet received the shutter // event. They will be returned to the streams when framework receives // the shutter event. Vector pendingOutputBuffers; // Fields used by the partial result only struct PartialResultInFlight { // Set by process_capture_result once 3A has been sent to clients bool haveSent3A; // Result metadata collected so far, when partial results are in use CameraMetadata collectedResult; PartialResultInFlight(): haveSent3A(false) { } } partialResult; // Default constructor needed by KeyedVector InFlightRequest() : shutterTimestamp(0), sensorTimestamp(0), requestStatus(OK), haveResultMetadata(false), numBuffersLeft(0), hasInputBuffer(false){ } InFlightRequest(int numBuffers) : shutterTimestamp(0), sensorTimestamp(0), requestStatus(OK), haveResultMetadata(false), numBuffersLeft(numBuffers), hasInputBuffer(false){ } InFlightRequest(int numBuffers, CaptureResultExtras extras) : shutterTimestamp(0), sensorTimestamp(0), requestStatus(OK), haveResultMetadata(false), numBuffersLeft(numBuffers), resultExtras(extras), hasInputBuffer(false){ } InFlightRequest(int numBuffers, CaptureResultExtras extras, bool hasInput) : shutterTimestamp(0), sensorTimestamp(0), requestStatus(OK), haveResultMetadata(false), numBuffersLeft(numBuffers), resultExtras(extras), hasInputBuffer(hasInput){ } }; // Map from frame number to the in-flight request state typedef KeyedVector InFlightMap; Mutex mInFlightLock; // Protects mInFlightMap InFlightMap mInFlightMap; status_t registerInFlight(uint32_t frameNumber, int32_t numBuffers, CaptureResultExtras resultExtras, bool hasInput); /** * For the partial result, check if all 3A state fields are available * and if so, queue up 3A-only result to the client. Returns true if 3A * is sent. */ bool processPartial3AResult(uint32_t frameNumber, const CameraMetadata& partial, const CaptureResultExtras& resultExtras); // Helpers for reading and writing 3A metadata into to/from partial results template bool get3AResult(const CameraMetadata& result, int32_t tag, T* value, uint32_t frameNumber); template bool insert3AResult(CameraMetadata &result, int32_t tag, const T* value, uint32_t frameNumber); /** * Tracking for idle detection */ sp mStatusTracker; /** * Output result queue and current HAL device 3A state */ // Lock for output side of device Mutex mOutputLock; /**** Scope for mOutputLock ****/ // the minimal frame number of the next non-reprocess result uint32_t mNextResultFrameNumber; // the minimal frame number of the next reprocess result uint32_t mNextReprocessResultFrameNumber; uint32_t mNextShutterFrameNumber; List mResultQueue; Condition mResultSignal; NotificationListener *mListener; /**** End scope for mOutputLock ****/ /** * Callback functions from HAL device */ void processCaptureResult(const camera3_capture_result *result); void notify(const camera3_notify_msg *msg); // Specific notify handlers void notifyError(const camera3_error_msg_t &msg, NotificationListener *listener); void notifyShutter(const camera3_shutter_msg_t &msg, NotificationListener *listener); // helper function to return the output buffers to the streams. void returnOutputBuffers(const camera3_stream_buffer_t *outputBuffers, size_t numBuffers, nsecs_t timestamp); // Insert the capture result given the pending metadata, result extras, // partial results, and the frame number to the result queue. void sendCaptureResult(CameraMetadata &pendingMetadata, CaptureResultExtras &resultExtras, CameraMetadata &collectedPartialResult, uint32_t frameNumber, bool reprocess); /**** Scope for mInFlightLock ****/ // Remove the in-flight request of the given index from mInFlightMap // if it's no longer needed. It must only be called with mInFlightLock held. void removeInFlightRequestIfReadyLocked(int idx); /**** End scope for mInFlightLock ****/ /** * Static callback forwarding methods from HAL to instance */ static callbacks_process_capture_result_t sProcessCaptureResult; static callbacks_notify_t sNotify; }; // class Camera3Device }; // namespace android #endif