/* * Copyright (C) 2007 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.webkit; import android.annotation.SystemApi; import android.content.Context; /** * Manages settings state for a WebView. When a WebView is first created, it * obtains a set of default settings. These default settings will be returned * from any getter call. A WebSettings object obtained from * WebView.getSettings() is tied to the life of the WebView. If a WebView has * been destroyed, any method call on WebSettings will throw an * IllegalStateException. */ // This is an abstract base class: concrete WebViewProviders must // create a class derived from this, and return an instance of it in the // WebViewProvider.getWebSettingsProvider() method implementation. public abstract class WebSettings { /** * Enum for controlling the layout of html. * */ // XXX: These must match LayoutAlgorithm in Settings.h in WebCore. public enum LayoutAlgorithm { NORMAL, /** * @deprecated This algorithm is now obsolete. */ @Deprecated SINGLE_COLUMN, /** * @deprecated This algorithm is now obsolete. */ @Deprecated NARROW_COLUMNS, TEXT_AUTOSIZING } /** * Enum for specifying the text size. * * * @deprecated Use {@link WebSettings#setTextZoom(int)} and {@link WebSettings#getTextZoom()} instead. */ public enum TextSize { SMALLEST(50), SMALLER(75), NORMAL(100), LARGER(150), LARGEST(200); TextSize(int size) { value = size; } int value; } /** * Enum for specifying the WebView's desired density. * */ public enum ZoomDensity { FAR(150), // 240dpi MEDIUM(100), // 160dpi CLOSE(75); // 120dpi ZoomDensity(int size) { value = size; } /** * @hide Only for use by WebViewProvider implementations */ public int getValue() { return value; } int value; } /** * Default cache usage mode. If the navigation type doesn't impose any * specific behavior, use cached resources when they are available * and not expired, otherwise load resources from the network. * Use with {@link #setCacheMode}. */ public static final int LOAD_DEFAULT = -1; /** * Normal cache usage mode. Use with {@link #setCacheMode}. * * @deprecated This value is obsolete, as from API level * {@link android.os.Build.VERSION_CODES#HONEYCOMB} and onwards it has the * same effect as {@link #LOAD_DEFAULT}. */ @Deprecated public static final int LOAD_NORMAL = 0; /** * Use cached resources when they are available, even if they have expired. * Otherwise load resources from the network. * Use with {@link #setCacheMode}. */ public static final int LOAD_CACHE_ELSE_NETWORK = 1; /** * Don't use the cache, load from the network. * Use with {@link #setCacheMode}. */ public static final int LOAD_NO_CACHE = 2; /** * Don't use the network, load from the cache. * Use with {@link #setCacheMode}. */ public static final int LOAD_CACHE_ONLY = 3; public enum RenderPriority { NORMAL, HIGH, LOW } /** * The plugin state effects how plugins are treated on a page. ON means * that any object will be loaded even if a plugin does not exist to handle * the content. ON_DEMAND means that if there is a plugin installed that * can handle the content, a placeholder is shown until the user clicks on * the placeholder. Once clicked, the plugin will be enabled on the page. * OFF means that all plugins will be turned off and any fallback content * will be used. */ public enum PluginState { ON, ON_DEMAND, OFF } /** * Used with {@link #setMixedContentMode} * * In this mode, the WebView will allow a secure origin to load content from any other origin, * even if that origin is insecure. This is the least secure mode of operation for the WebView, * and where possible apps should not set this mode. */ public static final int MIXED_CONTENT_ALWAYS_ALLOW = 0; /** * Used with {@link #setMixedContentMode} * * In this mode, the WebView will not allow a secure origin to load content from an insecure * origin. This is the preferred and most secure mode of operation for the WebView and apps are * strongly advised to use this mode. */ public static final int MIXED_CONTENT_NEVER_ALLOW = 1; /** * Used with {@link #setMixedContentMode} * * In this mode, the WebView will attempt to be compatible with the approach of a modern web * browser with regard to mixed content. Some insecure content may be allowed to be loaded by * a secure origin and other types of content will be blocked. The types of content are allowed * or blocked may change release to release and are not explicitly defined. * * This mode is intended to be used by apps that are not in control of the content that they * render but desire to operate in a reasonably secure environment. For highest security, apps * are recommended to use {@link #MIXED_CONTENT_NEVER_ALLOW}. */ public static final int MIXED_CONTENT_COMPATIBILITY_MODE = 2; /** * Enables dumping the pages navigation cache to a text file. The default * is false. * * @deprecated This method is now obsolete. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @SystemApi @Deprecated public abstract void setNavDump(boolean enabled); /** * Gets whether dumping the navigation cache is enabled. * * @return whether dumping the navigation cache is enabled * @see #setNavDump * @deprecated This method is now obsolete. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @SystemApi @Deprecated public abstract boolean getNavDump(); /** * Sets whether the WebView should support zooming using its on-screen zoom * controls and gestures. The particular zoom mechanisms that should be used * can be set with {@link #setBuiltInZoomControls}. This setting does not * affect zooming performed using the {@link WebView#zoomIn()} and * {@link WebView#zoomOut()} methods. The default is true. * * @param support whether the WebView should support zoom */ public abstract void setSupportZoom(boolean support); /** * Gets whether the WebView supports zoom. * * @return true if the WebView supports zoom * @see #setSupportZoom */ public abstract boolean supportZoom(); /** * Sets whether the WebView requires a user gesture to play media. * The default is true. * * @param require whether the WebView requires a user gesture to play media */ public abstract void setMediaPlaybackRequiresUserGesture(boolean require); /** * Gets whether the WebView requires a user gesture to play media. * * @return true if the WebView requires a user gesture to play media * @see #setMediaPlaybackRequiresUserGesture */ public abstract boolean getMediaPlaybackRequiresUserGesture(); /** * Sets whether the WebView should use its built-in zoom mechanisms. The * built-in zoom mechanisms comprise on-screen zoom controls, which are * displayed over the WebView's content, and the use of a pinch gesture to * control zooming. Whether or not these on-screen controls are displayed * can be set with {@link #setDisplayZoomControls}. The default is false. *

* The built-in mechanisms are the only currently supported zoom * mechanisms, so it is recommended that this setting is always enabled. * * @param enabled whether the WebView should use its built-in zoom mechanisms */ // This method was intended to select between the built-in zoom mechanisms // and the separate zoom controls. The latter were obtained using // {@link WebView#getZoomControls}, which is now hidden. public abstract void setBuiltInZoomControls(boolean enabled); /** * Gets whether the zoom mechanisms built into WebView are being used. * * @return true if the zoom mechanisms built into WebView are being used * @see #setBuiltInZoomControls */ public abstract boolean getBuiltInZoomControls(); /** * Sets whether the WebView should display on-screen zoom controls when * using the built-in zoom mechanisms. See {@link #setBuiltInZoomControls}. * The default is true. * * @param enabled whether the WebView should display on-screen zoom controls */ public abstract void setDisplayZoomControls(boolean enabled); /** * Gets whether the WebView displays on-screen zoom controls when using * the built-in zoom mechanisms. * * @return true if the WebView displays on-screen zoom controls when using * the built-in zoom mechanisms * @see #setDisplayZoomControls */ public abstract boolean getDisplayZoomControls(); /** * Enables or disables file access within WebView. File access is enabled by * default. Note that this enables or disables file system access only. * Assets and resources are still accessible using file:///android_asset and * file:///android_res. */ public abstract void setAllowFileAccess(boolean allow); /** * Gets whether this WebView supports file access. * * @see #setAllowFileAccess */ public abstract boolean getAllowFileAccess(); /** * Enables or disables content URL access within WebView. Content URL * access allows WebView to load content from a content provider installed * in the system. The default is enabled. */ public abstract void setAllowContentAccess(boolean allow); /** * Gets whether this WebView supports content URL access. * * @see #setAllowContentAccess */ public abstract boolean getAllowContentAccess(); /** * Sets whether the WebView loads pages in overview mode, that is, * zooms out the content to fit on screen by width. This setting is * taken into account when the content width is greater than the width * of the WebView control, for example, when {@link #getUseWideViewPort} * is enabled. The default is false. */ public abstract void setLoadWithOverviewMode(boolean overview); /** * Gets whether this WebView loads pages in overview mode. * * @return whether this WebView loads pages in overview mode * @see #setLoadWithOverviewMode */ public abstract boolean getLoadWithOverviewMode(); /** * Sets whether the WebView will enable smooth transition while panning or * zooming or while the window hosting the WebView does not have focus. * If it is true, WebView will choose a solution to maximize the performance. * e.g. the WebView's content may not be updated during the transition. * If it is false, WebView will keep its fidelity. The default value is false. * * @deprecated This method is now obsolete, and will become a no-op in future. */ @Deprecated public abstract void setEnableSmoothTransition(boolean enable); /** * Gets whether the WebView enables smooth transition while panning or * zooming. * * @see #setEnableSmoothTransition * * @deprecated This method is now obsolete, and will become a no-op in future. */ @Deprecated public abstract boolean enableSmoothTransition(); /** * Sets whether the WebView uses its background for over scroll background. * If true, it will use the WebView's background. If false, it will use an * internal pattern. Default is true. * * @deprecated This method is now obsolete. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @SystemApi @Deprecated public abstract void setUseWebViewBackgroundForOverscrollBackground(boolean view); /** * Gets whether this WebView uses WebView's background instead of * internal pattern for over scroll background. * * @see #setUseWebViewBackgroundForOverscrollBackground * @deprecated This method is now obsolete. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @SystemApi @Deprecated public abstract boolean getUseWebViewBackgroundForOverscrollBackground(); /** * Sets whether the WebView should save form data. The default is true. */ public abstract void setSaveFormData(boolean save); /** * Gets whether the WebView saves form data. * * @return whether the WebView saves form data * @see #setSaveFormData */ public abstract boolean getSaveFormData(); /** * Sets whether the WebView should save passwords. The default is true. * @deprecated Saving passwords in WebView will not be supported in future versions. */ @Deprecated public abstract void setSavePassword(boolean save); /** * Gets whether the WebView saves passwords. * * @return whether the WebView saves passwords * @see #setSavePassword * @deprecated Saving passwords in WebView will not be supported in future versions. */ @Deprecated public abstract boolean getSavePassword(); /** * Sets the text zoom of the page in percent. The default is 100. * * @param textZoom the text zoom in percent */ public abstract void setTextZoom(int textZoom); /** * Gets the text zoom of the page in percent. * * @return the text zoom of the page in percent * @see #setTextZoom */ public abstract int getTextZoom(); /** * Sets policy for third party cookies. * Developers should access this via {@link CookieManager#setShouldAcceptThirdPartyCookies}. * @hide Internal API. */ @SystemApi public abstract void setAcceptThirdPartyCookies(boolean accept); /** * Gets policy for third party cookies. * Developers should access this via {@link CookieManager#getShouldAcceptThirdPartyCookies}. * @hide Internal API */ @SystemApi public abstract boolean getAcceptThirdPartyCookies(); /** * Sets the text size of the page. The default is {@link TextSize#NORMAL}. * * @param t the text size as a {@link TextSize} value * @deprecated Use {@link #setTextZoom} instead. */ public synchronized void setTextSize(TextSize t) { setTextZoom(t.value); } /** * Gets the text size of the page. If the text size was previously specified * in percent using {@link #setTextZoom}, this will return the closest * matching {@link TextSize}. * * @return the text size as a {@link TextSize} value * @see #setTextSize * @deprecated Use {@link #getTextZoom} instead. */ public synchronized TextSize getTextSize() { TextSize closestSize = null; int smallestDelta = Integer.MAX_VALUE; int textSize = getTextZoom(); for (TextSize size : TextSize.values()) { int delta = Math.abs(textSize - size.value); if (delta == 0) { return size; } if (delta < smallestDelta) { smallestDelta = delta; closestSize = size; } } return closestSize != null ? closestSize : TextSize.NORMAL; } /** * Sets the default zoom density of the page. This must be called from the UI * thread. The default is {@link ZoomDensity#MEDIUM}. * * This setting is not recommended for use in new applications. If the WebView * is utilized to display mobile-oriented pages, the desired effect can be achieved by * adjusting 'width' and 'initial-scale' attributes of page's 'meta viewport' * tag. For pages lacking the tag, {@link android.webkit.WebView#setInitialScale} * and {@link #setUseWideViewPort} can be used. * * @param zoom the zoom density * @deprecated This method is no longer supported, see the function documentation for * recommended alternatives. */ @Deprecated public abstract void setDefaultZoom(ZoomDensity zoom); /** * Gets the default zoom density of the page. This should be called from * the UI thread. * * This setting is not recommended for use in new applications. * * @return the zoom density * @see #setDefaultZoom * @deprecated Will only return the default value. */ public abstract ZoomDensity getDefaultZoom(); /** * Enables using light touches to make a selection and activate mouseovers. * @deprecated From {@link android.os.Build.VERSION_CODES#JELLY_BEAN} this * setting is obsolete and has no effect. */ @Deprecated public abstract void setLightTouchEnabled(boolean enabled); /** * Gets whether light touches are enabled. * @see #setLightTouchEnabled * @deprecated This setting is obsolete. */ @Deprecated public abstract boolean getLightTouchEnabled(); /** * Controlled a rendering optimization that is no longer present. Setting * it now has no effect. * * @deprecated This setting now has no effect. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @Deprecated public void setUseDoubleTree(boolean use) { // Specified to do nothing, so no need for derived classes to override. } /** * Controlled a rendering optimization that is no longer present. Setting * it now has no effect. * * @deprecated This setting now has no effect. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @Deprecated public boolean getUseDoubleTree() { // Returns false unconditionally, so no need for derived classes to override. return false; } /** * Sets the user-agent string using an integer code. *

* Other values are ignored. The default is an Android user-agent string, * i.e. code value 0. * * @param ua the integer code for the user-agent string * @deprecated Please use {@link #setUserAgentString} instead. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @SystemApi @Deprecated public abstract void setUserAgent(int ua); /** * Gets the user-agent as an integer code. * * * @return the integer code for the user-agent string * @see #setUserAgent * @deprecated Please use {@link #getUserAgentString} instead. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} */ @SystemApi @Deprecated public abstract int getUserAgent(); /** * Sets whether the WebView should enable support for the "viewport" * HTML meta tag or should use a wide viewport. * When the value of the setting is false, the layout width is always set to the * width of the WebView control in device-independent (CSS) pixels. * When the value is true and the page contains the viewport meta tag, the value * of the width specified in the tag is used. If the page does not contain the tag or * does not provide a width, then a wide viewport will be used. * * @param use whether to enable support for the viewport meta tag */ public abstract void setUseWideViewPort(boolean use); /** * Gets whether the WebView supports the "viewport" * HTML meta tag or will use a wide viewport. * * @return true if the WebView supports the viewport meta tag * @see #setUseWideViewPort */ public abstract boolean getUseWideViewPort(); /** * Sets whether the WebView whether supports multiple windows. If set to * true, {@link WebChromeClient#onCreateWindow} must be implemented by the * host application. The default is false. * * @param support whether to suport multiple windows */ public abstract void setSupportMultipleWindows(boolean support); /** * Gets whether the WebView supports multiple windows. * * @return true if the WebView supports multiple windows * @see #setSupportMultipleWindows */ public abstract boolean supportMultipleWindows(); /** * Sets the underlying layout algorithm. This will cause a relayout of the * WebView. The default is {@link LayoutAlgorithm#NARROW_COLUMNS}. * * @param l the layout algorithm to use, as a {@link LayoutAlgorithm} value */ public abstract void setLayoutAlgorithm(LayoutAlgorithm l); /** * Gets the current layout algorithm. * * @return the layout algorithm in use, as a {@link LayoutAlgorithm} value * @see #setLayoutAlgorithm */ public abstract LayoutAlgorithm getLayoutAlgorithm(); /** * Sets the standard font family name. The default is "sans-serif". * * @param font a font family name */ public abstract void setStandardFontFamily(String font); /** * Gets the standard font family name. * * @return the standard font family name as a string * @see #setStandardFontFamily */ public abstract String getStandardFontFamily(); /** * Sets the fixed font family name. The default is "monospace". * * @param font a font family name */ public abstract void setFixedFontFamily(String font); /** * Gets the fixed font family name. * * @return the fixed font family name as a string * @see #setFixedFontFamily */ public abstract String getFixedFontFamily(); /** * Sets the sans-serif font family name. The default is "sans-serif". * * @param font a font family name */ public abstract void setSansSerifFontFamily(String font); /** * Gets the sans-serif font family name. * * @return the sans-serif font family name as a string * @see #setSansSerifFontFamily */ public abstract String getSansSerifFontFamily(); /** * Sets the serif font family name. The default is "sans-serif". * * @param font a font family name */ public abstract void setSerifFontFamily(String font); /** * Gets the serif font family name. The default is "serif". * * @return the serif font family name as a string * @see #setSerifFontFamily */ public abstract String getSerifFontFamily(); /** * Sets the cursive font family name. The default is "cursive". * * @param font a font family name */ public abstract void setCursiveFontFamily(String font); /** * Gets the cursive font family name. * * @return the cursive font family name as a string * @see #setCursiveFontFamily */ public abstract String getCursiveFontFamily(); /** * Sets the fantasy font family name. The default is "fantasy". * * @param font a font family name */ public abstract void setFantasyFontFamily(String font); /** * Gets the fantasy font family name. * * @return the fantasy font family name as a string * @see #setFantasyFontFamily */ public abstract String getFantasyFontFamily(); /** * Sets the minimum font size. The default is 8. * * @param size a non-negative integer between 1 and 72. Any number outside * the specified range will be pinned. */ public abstract void setMinimumFontSize(int size); /** * Gets the minimum font size. * * @return a non-negative integer between 1 and 72 * @see #setMinimumFontSize */ public abstract int getMinimumFontSize(); /** * Sets the minimum logical font size. The default is 8. * * @param size a non-negative integer between 1 and 72. Any number outside * the specified range will be pinned. */ public abstract void setMinimumLogicalFontSize(int size); /** * Gets the minimum logical font size. * * @return a non-negative integer between 1 and 72 * @see #setMinimumLogicalFontSize */ public abstract int getMinimumLogicalFontSize(); /** * Sets the default font size. The default is 16. * * @param size a non-negative integer between 1 and 72. Any number outside * the specified range will be pinned. */ public abstract void setDefaultFontSize(int size); /** * Gets the default font size. * * @return a non-negative integer between 1 and 72 * @see #setDefaultFontSize */ public abstract int getDefaultFontSize(); /** * Sets the default fixed font size. The default is 16. * * @param size a non-negative integer between 1 and 72. Any number outside * the specified range will be pinned. */ public abstract void setDefaultFixedFontSize(int size); /** * Gets the default fixed font size. * * @return a non-negative integer between 1 and 72 * @see #setDefaultFixedFontSize */ public abstract int getDefaultFixedFontSize(); /** * Sets whether the WebView should load image resources. Note that this method * controls loading of all images, including those embedded using the data * URI scheme. Use {@link #setBlockNetworkImage} to control loading only * of images specified using network URI schemes. Note that if the value of this * setting is changed from false to true, all images resources referenced * by content currently displayed by the WebView are loaded automatically. * The default is true. * * @param flag whether the WebView should load image resources */ public abstract void setLoadsImagesAutomatically(boolean flag); /** * Gets whether the WebView loads image resources. This includes * images embedded using the data URI scheme. * * @return true if the WebView loads image resources * @see #setLoadsImagesAutomatically */ public abstract boolean getLoadsImagesAutomatically(); /** * Sets whether the WebView should not load image resources from the * network (resources accessed via http and https URI schemes). Note * that this method has no effect unless * {@link #getLoadsImagesAutomatically} returns true. Also note that * disabling all network loads using {@link #setBlockNetworkLoads} * will also prevent network images from loading, even if this flag is set * to false. When the value of this setting is changed from true to false, * network images resources referenced by content currently displayed by * the WebView are fetched automatically. The default is false. * * @param flag whether the WebView should not load image resources from the * network * @see #setBlockNetworkLoads */ public abstract void setBlockNetworkImage(boolean flag); /** * Gets whether the WebView does not load image resources from the network. * * @return true if the WebView does not load image resources from the network * @see #setBlockNetworkImage */ public abstract boolean getBlockNetworkImage(); /** * Sets whether the WebView should not load resources from the network. * Use {@link #setBlockNetworkImage} to only avoid loading * image resources. Note that if the value of this setting is * changed from true to false, network resources referenced by content * currently displayed by the WebView are not fetched until * {@link android.webkit.WebView#reload} is called. * If the application does not have the * {@link android.Manifest.permission#INTERNET} permission, attempts to set * a value of false will cause a {@link java.lang.SecurityException} * to be thrown. The default value is false if the application has the * {@link android.Manifest.permission#INTERNET} permission, otherwise it is * true. * * @param flag whether the WebView should not load any resources from the * network * @see android.webkit.WebView#reload */ public abstract void setBlockNetworkLoads(boolean flag); /** * Gets whether the WebView does not load any resources from the network. * * @return true if the WebView does not load any resources from the network * @see #setBlockNetworkLoads */ public abstract boolean getBlockNetworkLoads(); /** * Tells the WebView to enable JavaScript execution. * The default is false. * * @param flag true if the WebView should execute JavaScript */ public abstract void setJavaScriptEnabled(boolean flag); /** * Sets whether JavaScript running in the context of a file scheme URL * should be allowed to access content from any origin. This includes * access to content from other file scheme URLs. See * {@link #setAllowFileAccessFromFileURLs}. To enable the most restrictive, * and therefore secure policy, this setting should be disabled. * Note that this setting affects only JavaScript access to file scheme * resources. Other access to such resources, for example, from image HTML * elements, is unaffected. *

* The default value is true for API level * {@link android.os.Build.VERSION_CODES#ICE_CREAM_SANDWICH_MR1} and below, * and false for API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN} * and above. * * @param flag whether JavaScript running in the context of a file scheme * URL should be allowed to access content from any origin */ public abstract void setAllowUniversalAccessFromFileURLs(boolean flag); /** * Sets whether JavaScript running in the context of a file scheme URL * should be allowed to access content from other file scheme URLs. To * enable the most restrictive, and therefore secure policy, this setting * should be disabled. Note that the value of this setting is ignored if * the value of {@link #getAllowUniversalAccessFromFileURLs} is true. * Note too, that this setting affects only JavaScript access to file scheme * resources. Other access to such resources, for example, from image HTML * elements, is unaffected. *

* The default value is true for API level * {@link android.os.Build.VERSION_CODES#ICE_CREAM_SANDWICH_MR1} and below, * and false for API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN} * and above. * * @param flag whether JavaScript running in the context of a file scheme * URL should be allowed to access content from other file * scheme URLs */ public abstract void setAllowFileAccessFromFileURLs(boolean flag); /** * Sets whether the WebView should enable plugins. The default is false. * * @param flag true if plugins should be enabled * @deprecated This method has been deprecated in favor of * {@link #setPluginState} * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} */ @SystemApi @Deprecated public abstract void setPluginsEnabled(boolean flag); /** * Tells the WebView to enable, disable, or have plugins on demand. On * demand mode means that if a plugin exists that can handle the embedded * content, a placeholder icon will be shown instead of the plugin. When * the placeholder is clicked, the plugin will be enabled. The default is * {@link PluginState#OFF}. * * @param state a PluginState value * @deprecated Plugins will not be supported in future, and should not be used. */ @Deprecated public abstract void setPluginState(PluginState state); /** * Sets a custom path to plugins used by the WebView. This method is * obsolete since each plugin is now loaded from its own package. * * @param pluginsPath a String path to the directory containing plugins * @deprecated This method is no longer used as plugins are loaded from * their own APK via the system's package manager. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} */ @Deprecated public void setPluginsPath(String pluginsPath) { // Specified to do nothing, so no need for derived classes to override. } /** * Sets the path to where database storage API databases should be saved. * In order for the database storage API to function correctly, this method * must be called with a path to which the application can write. This * method should only be called once: repeated calls are ignored. * * @param databasePath a path to the directory where databases should be * saved. * @deprecated Database paths are managed by the implementation and calling this method * will have no effect. */ // This will update WebCore when the Sync runs in the C++ side. // Note that the WebCore Database Tracker only allows the path to be set // once. @Deprecated public abstract void setDatabasePath(String databasePath); /** * Sets the path where the Geolocation databases should be saved. In order * for Geolocation permissions and cached positions to be persisted, this * method must be called with a path to which the application can write. * * @param databasePath a path to the directory where databases should be * saved. */ // This will update WebCore when the Sync runs in the C++ side. public abstract void setGeolocationDatabasePath(String databasePath); /** * Sets whether the Application Caches API should be enabled. The default * is false. Note that in order for the Application Caches API to be * enabled, a valid database path must also be supplied to * {@link #setAppCachePath}. * * @param flag true if the WebView should enable Application Caches */ public abstract void setAppCacheEnabled(boolean flag); /** * Sets the path to the Application Caches files. In order for the * Application Caches API to be enabled, this method must be called with a * path to which the application can write. This method should only be * called once: repeated calls are ignored. * * @param appCachePath a String path to the directory containing * Application Caches files. * @see #setAppCacheEnabled */ public abstract void setAppCachePath(String appCachePath); /** * Sets the maximum size for the Application Cache content. The passed size * will be rounded to the nearest value that the database can support, so * this should be viewed as a guide, not a hard limit. Setting the * size to a value less than current database size does not cause the * database to be trimmed. The default size is {@link Long#MAX_VALUE}. * It is recommended to leave the maximum size set to the default value. * * @param appCacheMaxSize the maximum size in bytes * @deprecated In future quota will be managed automatically. */ @Deprecated public abstract void setAppCacheMaxSize(long appCacheMaxSize); /** * Sets whether the database storage API is enabled. The default value is * false. See also {@link #setDatabasePath} for how to correctly set up the * database storage API. * * This setting is global in effect, across all WebView instances in a process. * Note you should only modify this setting prior to making any WebView * page load within a given process, as the WebView implementation may ignore * changes to this setting after that point. * * @param flag true if the WebView should use the database storage API */ public abstract void setDatabaseEnabled(boolean flag); /** * Sets whether the DOM storage API is enabled. The default value is false. * * @param flag true if the WebView should use the DOM storage API */ public abstract void setDomStorageEnabled(boolean flag); /** * Gets whether the DOM Storage APIs are enabled. * * @return true if the DOM Storage APIs are enabled * @see #setDomStorageEnabled */ public abstract boolean getDomStorageEnabled(); /** * Gets the path to where database storage API databases are saved. * * @return the String path to the database storage API databases * @see #setDatabasePath * @deprecated Database paths are managed by the implementation this method is obsolete. */ @Deprecated public abstract String getDatabasePath(); /** * Gets whether the database storage API is enabled. * * @return true if the database storage API is enabled * @see #setDatabaseEnabled */ public abstract boolean getDatabaseEnabled(); /** * Sets whether Geolocation is enabled. The default is true. *

* Please note that in order for the Geolocation API to be usable * by a page in the WebView, the following requirements must be met: *

*

* As an option, it is possible to store previous locations and web origin * permissions in a database. See {@link #setGeolocationDatabasePath}. * * @param flag whether Geolocation should be enabled */ public abstract void setGeolocationEnabled(boolean flag); /** * Gets whether JavaScript is enabled. * * @return true if JavaScript is enabled * @see #setJavaScriptEnabled */ public abstract boolean getJavaScriptEnabled(); /** * Gets whether JavaScript running in the context of a file scheme URL can * access content from any origin. This includes access to content from * other file scheme URLs. * * @return whether JavaScript running in the context of a file scheme URL * can access content from any origin * @see #setAllowUniversalAccessFromFileURLs */ public abstract boolean getAllowUniversalAccessFromFileURLs(); /** * Gets whether JavaScript running in the context of a file scheme URL can * access content from other file scheme URLs. * * @return whether JavaScript running in the context of a file scheme URL * can access content from other file scheme URLs * @see #setAllowFileAccessFromFileURLs */ public abstract boolean getAllowFileAccessFromFileURLs(); /** * Gets whether plugins are enabled. * * @return true if plugins are enabled * @see #setPluginsEnabled * @deprecated This method has been replaced by {@link #getPluginState} * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} */ @SystemApi @Deprecated public abstract boolean getPluginsEnabled(); /** * Gets the current state regarding whether plugins are enabled. * * @return the plugin state as a {@link PluginState} value * @see #setPluginState * @deprecated Plugins will not be supported in future, and should not be used. */ @Deprecated public abstract PluginState getPluginState(); /** * Gets the directory that contains the plugin libraries. This method is * obsolete since each plugin is now loaded from its own package. * * @return an empty string * @deprecated This method is no longer used as plugins are loaded from * their own APK via the system's package manager. * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} */ @Deprecated public String getPluginsPath() { // Unconditionally returns empty string, so no need for derived classes to override. return ""; } /** * Tells JavaScript to open windows automatically. This applies to the * JavaScript function window.open(). The default is false. * * @param flag true if JavaScript can open windows automatically */ public abstract void setJavaScriptCanOpenWindowsAutomatically(boolean flag); /** * Gets whether JavaScript can open windows automatically. * * @return true if JavaScript can open windows automatically during * window.open() * @see #setJavaScriptCanOpenWindowsAutomatically */ public abstract boolean getJavaScriptCanOpenWindowsAutomatically(); /** * Sets the default text encoding name to use when decoding html pages. * The default is "UTF-8". * * @param encoding the text encoding name */ public abstract void setDefaultTextEncodingName(String encoding); /** * Gets the default text encoding name. * * @return the default text encoding name as a string * @see #setDefaultTextEncodingName */ public abstract String getDefaultTextEncodingName(); /** * Sets the WebView's user-agent string. If the string is null or empty, * the system default value will be used. */ public abstract void setUserAgentString(String ua); /** * Gets the WebView's user-agent string. * * @return the WebView's user-agent string * @see #setUserAgentString */ public abstract String getUserAgentString(); /** * Returns the default User-Agent used by a WebView. * An instance of WebView could use a different User-Agent if a call * is made to {@link WebSettings#setUserAgentString(String)}. * * @param context a Context object used to access application assets */ public static String getDefaultUserAgent(Context context) { return WebViewFactory.getProvider().getStatics().getDefaultUserAgent(context); } /** * Tells the WebView whether it needs to set a node to have focus when * {@link WebView#requestFocus(int, android.graphics.Rect)} is called. The * default value is true. * * @param flag whether the WebView needs to set a node */ public abstract void setNeedInitialFocus(boolean flag); /** * Sets the priority of the Render thread. Unlike the other settings, this * one only needs to be called once per process. The default value is * {@link RenderPriority#NORMAL}. * * @param priority the priority * @deprecated It is not recommended to adjust thread priorities, and this will * not be supported in future versions. */ @Deprecated public abstract void setRenderPriority(RenderPriority priority); /** * Overrides the way the cache is used. The way the cache is used is based * on the navigation type. For a normal page load, the cache is checked * and content is re-validated as needed. When navigating back, content is * not revalidated, instead the content is just retrieved from the cache. * This method allows the client to override this behavior by specifying * one of {@link #LOAD_DEFAULT}, * {@link #LOAD_CACHE_ELSE_NETWORK}, {@link #LOAD_NO_CACHE} or * {@link #LOAD_CACHE_ONLY}. The default value is {@link #LOAD_DEFAULT}. * * @param mode the mode to use */ public abstract void setCacheMode(int mode); /** * Gets the current setting for overriding the cache mode. * * @return the current setting for overriding the cache mode * @see #setCacheMode */ public abstract int getCacheMode(); /** * Configures the WebView's behavior when a secure origin attempts to load a resource from an * insecure origin. * * By default, apps that target {@link android.os.Build.VERSION_CODES#KITKAT} or below default * to {@link #MIXED_CONTENT_ALWAYS_ALLOW}. Apps targeting * {@link android.os.Build.VERSION_CODES#LOLLIPOP} default to {@link #MIXED_CONTENT_NEVER_ALLOW}. * * The preferred and most secure mode of operation for the WebView is * {@link #MIXED_CONTENT_NEVER_ALLOW} and use of {@link #MIXED_CONTENT_ALWAYS_ALLOW} is * strongly discouraged. * * @param mode The mixed content mode to use. One of {@link #MIXED_CONTENT_NEVER_ALLOW}, * {@link #MIXED_CONTENT_NEVER_ALLOW} or {@link #MIXED_CONTENT_COMPATIBILITY_MODE}. */ public abstract void setMixedContentMode(int mode); /** * Gets the current behavior of the WebView with regard to loading insecure content from a * secure origin. * @return The current setting, one of {@link #MIXED_CONTENT_NEVER_ALLOW}, * {@link #MIXED_CONTENT_NEVER_ALLOW} or {@link #MIXED_CONTENT_COMPATIBILITY_MODE}. */ public abstract int getMixedContentMode(); /** * Sets whether to use a video overlay for embedded encrypted video. * In API levels prior to {@link android.os.Build.VERSION_CODES#LOLLIPOP}, encrypted video can * only be rendered directly on a secure video surface, so it had been a hard problem to play * encrypted video in HTML. When this flag is on, WebView can play encrypted video (MSE/EME) * by using a video overlay (aka hole-punching) for videos embedded using HTML <video> * tag.
* Caution: This setting is intended for use only in a narrow set of circumstances and apps * should only enable it if they require playback of encrypted video content. It will impose * the following limitations on the WebView: *

* This is not an exhaustive set of constraints and it may vary with new versions of the * WebView. * @hide */ @SystemApi public abstract void setVideoOverlayForEmbeddedEncryptedVideoEnabled(boolean flag); /** * Gets whether a video overlay will be used for embedded encrypted video. * * @return true if WebView uses a video overlay for embedded encrypted video. * @see #setVideoOverlayForEmbeddedEncryptedVideoEnabled * @hide */ @SystemApi public abstract boolean getVideoOverlayForEmbeddedEncryptedVideoEnabled(); }