path: root/core/res/res/values/config.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2009, The Android Open Source Project
** Patched by Sven Dawitz; Copyright (C) 2011 CyanogenMod Project
**
** Licensed under the Apache License, Version 2.0 (the "License"); 
** you may not use this file except in compliance with the License. 
** You may obtain a copy of the License at 
**
**     http://www.apache.org/licenses/LICENSE-2.0 
**
** Unless required by applicable law or agreed to in writing, software 
** distributed under the License is distributed on an "AS IS" BASIS, 
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
** See the License for the specific language governing permissions and 
** limitations under the License.
*/
-->

<!-- These resources are around just to allow their values to be customized
     for different hardware and product builds. -->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
    <!-- Component to be used as the status bar service.  Must implement the IStatusBar
         interface.  This name is in the ComponentName flattened format (package/class)  -->
    <string name="config_statusBarComponent">com.android.systemui/com.android.systemui.statusbar.StatusBarService</string>

    <!-- Do not translate. Defines the slots for the right-hand side icons.  That is to say, the
         icons in the status bar that are not notifications. -->
    <string-array name="config_statusBarIcons">
       <item><xliff:g id="id">ime</xliff:g></item>
       <item><xliff:g id="id">sync_failing</xliff:g></item>
       <item><xliff:g id="id">sync_active</xliff:g></item>
       <item><xliff:g id="id">gps</xliff:g></item>
       <item><xliff:g id="id">bluetooth</xliff:g></item>
       <item><xliff:g id="id">nfc</xliff:g></item>
       <item><xliff:g id="id">tty</xliff:g></item>
       <item><xliff:g id="id">speakerphone</xliff:g></item>
       <item><xliff:g id="id">mute</xliff:g></item>
       <item><xliff:g id="id">volume</xliff:g></item>
       <item><xliff:g id="id">headset</xliff:g></item>
       <item><xliff:g id="id">wifi</xliff:g></item>
       <item><xliff:g id="id">wimax</xliff:g></item>
       <item><xliff:g id="id">cdma_eri</xliff:g></item>
       <item><xliff:g id="id">data_connection</xliff:g></item>
       <item><xliff:g id="id">phone_evdo_signal</xliff:g></item>
       <item><xliff:g id="id">phone_signal</xliff:g></item>
       <item><xliff:g id="id">battery</xliff:g></item>
       <item><xliff:g id="id">alarm_clock</xliff:g></item>
       <item><xliff:g id="id">secure</xliff:g></item>
       <item><xliff:g id="id">clock</xliff:g></item>
    </string-array>

    <!-- Flag indicating whether the surface flinger has limited
         alpha compositing functionality in hardware.  If set, the window
         manager will disable alpha trasformation in animations where not
         strictly needed. -->
    <bool name="config_sf_limitedAlpha">false</bool>
    
    <!-- Flag indicating whether the surface flinger is inefficient
         at performing a blur.  Used by parts of the UI to turn off
         the blur effect where it isn't worth the performance hit. -->
    <bool name="config_sf_slowBlur">false</bool>
    
    <!-- The duration (in milliseconds) of a short animation. -->
    <integer name="config_shortAnimTime">150</integer>
    <integer name="config_activityShortDur">150</integer>
    <integer name="config_activityDefaultDur">220</integer>
    
    <!-- The duration (in milliseconds) of a medium-length animation. -->
    <integer name="config_mediumAnimTime">300</integer>
    
    <!-- The duration (in milliseconds) of a long animation. -->
    <integer name="config_longAnimTime">400</integer>

    <!-- The duration (in milliseconds) that the radio will scan for a signal
         when there's no network connection. If the scan doesn't timeout, use zero -->
    <integer name="config_radioScanningTimeout">0</integer>

    <!-- A product with no SD card == not removable. -->
    <bool name="config_externalStorageRemovable" product="nosdcard">false</bool>
    <!-- Configures whether the primary external storage device is
         removable.  For example, if external storage is on an SD card,
         it is removable; if it is built in to the device, it is not removable.
         The default product has external storage on an SD card, which is
         removable. -->
    <bool name="config_externalStorageRemovable" product="default">true</bool>

    <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
         Please don't copy them, copy anything else. -->

    <!-- This string array should be overridden by the device to present a list of network
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[Connection name],[ConnectivityManager connection type],
         [associated radio-type],[priority]  -->
    <string-array translatable="false" name="networkAttributes">
        <item>"wifi,1,1,1"</item>
        <item>"mobile,0,0,0"</item>
        <item>"mobile_mms,2,0,2"</item>
        <item>"mobile_supl,3,0,2"</item>
        <item>"mobile_hipri,5,0,3"</item>
    </string-array>

    <!-- This string array should be overridden by the device to present a list of radio
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[ConnectivityManager connectionType],
                      [# simultaneous connection types]"  -->
    <string-array translatable="false" name="radioAttributes">
        <item>"1,1"</item>
        <item>"0,1"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         USB interfaces.  If the device doesn't want to support tething over USB this should
         be empty.  An example would be "usb.*" -->
    <string-array translatable="false" name="config_tether_usb_regexs">
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wifi_regexs">
    </string-array>

    <!-- Dhcp range (min, max) to use for tethering purposes -->
    <string-array translatable="false" name="config_tether_dhcp_range">
    </string-array>

    <!-- Regex array of allowable upstream ifaces for tethering - for example if you want
         tethering on a new interface called "foo2" add <item>"foo\\d"</item> to the array -->
    <!-- Interfaces will be prioritized according to the order listed -->
    <string-array translatable="false" name="config_tether_upstream_regexs">
    </string-array>

    <!-- Boolean indicating if we require the use of DUN on mobile for tethering.
         Note that this defaults to false so that if you move to a carrier that
         hasn't configured anything tethering will still work.  If you'd rather
         make the device untetherable on unconfigured devices, set to true -->
    <bool translatable="false" name="config_tether_dun_required">false</bool>

    <!-- String containing the apn value for tethering.  May be overriden by secure settings
         TETHER_DUN_APN.  Value is a comma separated series of strings:
         "name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type"
         note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" -->
    <string translatable="false" name="config_tether_apndata"></string>


    <!-- Flag indicating whether the keyguard should be bypassed when
         the slider is open.  This can be set or unset depending how easily
         the slider can be opened (for example, in a pocket or purse). -->
    <bool name="config_bypass_keyguard_if_slider_open">true</bool>
    
    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
    <bool name="config_automatic_brightness_available">false</bool>

    <!-- Don't name config resources like this.  It should look like config_annoyDianne -->
    <bool name="config_annoy_dianne">true</bool>

    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
    <bool name="config_unplugTurnsOnScreen">false</bool>
    
    <!-- If this is true, the screen will fade off. -->
    <bool name="config_animateScreenLights">true</bool>
    
    <!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION -->

    <!-- If true, the screen can be rotated via the accelerometer in all 4
         rotations as the default behavior. -->
    <bool name="config_allowAllRotations">true</bool>

    <!-- The number of degrees to rotate the display when the keyboard is open. -->
    <integer name="config_lidOpenRotation">90</integer>

    <!-- The number of degrees to rotate the display when the device is in a desk dock.
         A value of -1 means no change in orientation by default. -->
    <integer name="config_deskDockRotation">-1</integer>

    <!-- The number of degrees to rotate the display when the device is in a car dock.
         A value of -1 means no change in orientation by default. -->
    <integer name="config_carDockRotation">-1</integer>

    <!-- Control whether being in the desk dock (and powered) always
         keeps the screen on.  By default it stays on when plugged in to
         AC.  0 will not keep it on; or together 1 to stay on when plugged
         in to AC and 2 to stay on when plugged in to USB.  (So 3 for both.) -->
    <integer name="config_deskDockKeepsScreenOn">1</integer>

    <!-- Control whether being in the car dock (and powered) always
         keeps the screen on.  By default it stays on when plugged in to
         AC.  0 will not keep it on; or together 1 to stay on when plugged
         in to AC and 2 to stay on when plugged in to USB.  (So 3 for both.) -->
    <integer name="config_carDockKeepsScreenOn">1</integer>

    <!-- Control whether being in the desk dock should enable accelerometer
         based screen orientation.  Note this should probably default to true
         like car dock, but we haven't had a chance to test it. -->
    <bool name="config_deskDockEnablesAccelerometer">false</bool>

    <!-- Control whether being in the car dock should enable accelerometer based
         screen orientation.  This defaults to true because putting a device in
         a car dock make the accelerometer more a physical input (like a lid). -->
    <bool name="config_carDockEnablesAccelerometer">true</bool>

    <!-- Indicate whether the lid state impacts the accessibility of
         the physical keyboard.  0 means it doesn't, 1 means it is accessible
         when the lid is open, 2 means it is accessible when the lid is
         closed.  The default is 1. -->
    <integer name="config_lidKeyboardAccessibility">1</integer>

    <!-- Indicate whether the lid state impacts the accessibility of
         the physical keyboard.  0 means it doesn't, 1 means it is accessible
         when the lid is open, 2 means it is accessible when the lid is
         closed.  The default is 0. -->
    <integer name="config_lidNavigationAccessibility">0</integer>

    <!-- Indicate whether the SD card is accessible without removing the battery. -->
    <bool name="config_batterySdCardAccessibility">false</bool>

    <!-- Vibrator pattern for feedback about a long screen/key press -->
    <integer-array name="config_longPressVibePattern">
        <item>0</item>
        <item>1</item>
        <item>20</item>
        <item>21</item>
    </integer-array>
    
    <!-- Vibrator pattern for feedback about touching a virtual key -->
    <integer-array name="config_virtualKeyVibePattern">
        <item>0</item>
        <item>10</item>
        <item>20</item>
        <item>30</item>
    </integer-array>

    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
    <integer-array name="config_keyboardTapVibePattern">
        <item>40</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
    <integer-array name="config_safeModeDisabledVibePattern">
        <item>0</item>
        <item>1</item>
        <item>20</item>
        <item>21</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
    <integer-array name="config_safeModeEnabledVibePattern">
        <item>0</item>
        <item>1</item>
        <item>20</item>
        <item>21</item>
        <item>500</item>
        <item>600</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about hitting a scroll barrier -->
    <integer-array name="config_scrollBarrierVibePattern">
        <item>0</item>
        <item>15</item>
        <item>10</item>
        <item>10</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about on a key release -->
    <integer-array name="config_virtualKeyUpPattern">
        <item>5</item>
        <item>18</item>
    </integer-array>

    <bool name="config_use_strict_phone_number_comparation">false</bool>

    <!-- Display low battery warning when battery level dips to this value -->
    <integer name="config_lowBatteryWarningLevel">15</integer>

    <!-- Close low battery warning when battery level reaches this value -->
    <integer name="config_lowBatteryCloseWarningLevel">20</integer>

    <!-- Default color for notification LED. -->
    <color name="config_defaultNotificationColor">#ff00ff00</color>

    <!-- Default LED on time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOn">500</integer>

    <!-- Default LED off time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOff">2000</integer>

    <!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
    <bool name="config_disableMenuKeyInLockScreen">false</bool>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N + 1 zones as follows:

         Zone 0:        0 <= LUX < array[0]
         Zone 1:        array[0] <= LUX < array[1]
         ...
         Zone N:        array[N - 1] <= LUX < array[N]
         Zone N + 1:    array[N] <= LUX < infinity

         Must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLevels">
    </integer-array>

    <!-- Array of output values for LCD backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLcdBacklightValues">
    </integer-array>

    <!-- Array of output values for button backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessButtonBacklightValues">
    </integer-array>

    <!-- Array of output values for keyboard backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessKeyboardBacklightValues">
    </integer-array>

    <!-- Amount of time it takes for the light sensor to warm up in milliseconds.
         For this time after the screen turns on, the Power Manager
         will not debounce light sensor readings -->
    <integer name="config_lightSensorWarmupTime">0</integer>

    <!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView -->
    <bool name="config_swipeDisambiguation">true</bool>

    <!-- Enables special filtering code in the framework for raw touch events
         from the touch driver.  This code exists for one particular device,
         and should not be enabled for any others.  Hopefully in the future
         it will be removed when the lower-level touch driver generates better
         data. -->
    <bool name="config_filterTouchEvents">false</bool>

    <!-- Enables special filtering code in the framework for raw touch events
         from the touch driver. This code exists for one particular device,
         and should not be enabled for any others. -->
    <bool name="config_filterJumpyTouchEvents">false</bool>

    <!-- Specifies the amount of time to disable virtual keys after the screen is touched
         in order to filter out accidental virtual key presses due to swiping gestures
         or taps near the edge of the display.  May be 0 to disable the feature.
         It is recommended that this value be no more than 250 ms.
         This feature should be disabled for most devices. -->
    <integer name="config_virtualKeyQuietTimeMillis">0</integer>

    <!-- Component name of the default wallpaper. This will be ImageWallpaper if not 
         specified -->
    <string name="default_wallpaper_component">@null</string>

    <!-- Component name of the service providing network location support. -->
    <string name="config_networkLocationProvider">@null</string>

    <!-- Component name of the service providing geocoder API support. -->
    <string name="config_geocodeProvider">@null</string>

    <!-- Boolean indicating if current platform supports bluetooth SCO for off call
    use cases -->
    <bool name="config_bluetooth_sco_off_call">true</bool>

    <!-- The default data-use polling period. -->
    <integer name="config_datause_polling_period_sec">600</integer>

    <!-- The default data-use threshold in bytes. 0 disables-->
    <integer name="config_datause_threshold_bytes">0</integer>

    <!-- The default reduced-datarate value in kilobits per sec -->
    <integer name="config_datause_throttle_kbitsps">300</integer>

    <!-- The default iface on which to monitor data use -->
    <string name="config_datause_iface">rmnet0</string>

    <!-- The default reduced-datarate notification mask -->
    <!-- 2 means give warning -->
    <integer name="config_datause_notification_type">2</integer>

    <!-- Enables SIP on WIFI only -->
    <bool name="config_sip_wifi_only">true</bool>

    <!-- Boolean indicating if restoring network selection should be skipped -->
    <!-- The restoring is handled by modem if it is true-->
    <bool translatable="false" name="skip_restoring_network_selection">false</bool>

    <!-- Handle notifications differently if device only uses an amber/green
    LED. This also needs a liblights module that enables them accordingly. -->
    <bool name="config_amber_green_light">false</bool>

    <!-- Allows the light sensor to be ignored when flashlight is on -->
    <bool name="config_flashlight_affects_lightsensor">false</bool>

    <!-- Enable the screen animation -->
    <bool name="config_enableScreenAnimation">true</bool>

    <!-- Enable the screen-on animation -->
    <bool name="config_enableScreenOnAnimation">false</bool>

    <!-- Enable the screen-off animation -->
    <bool name="config_enableScreenOffAnimation">true</bool>

    <!-- Configure rotary bottom margin -->
    <integer name="config_rotaryMarginBottomDIP">60</integer>

    <!-- Configure rotary outer radius -->
    <integer name="config_rotaryOuterRadiusDIP">390</integer>

    <!-- Configure rotary stroke width -->
    <integer name="config_rotaryStrokeWidthDIP">83</integer>

    <!-- Configure lense unlock time label offset -->
    <integer name="config_lenseTimeLabelOffsetDIP">0</integer>

    <!-- Configure ring lockscreen threshold radius -->
    <integer name="config_ringThresholdDIP">160</integer>

    <!-- Configure ring lockscreen bottom margin -->
    <integer name="config_ringBaselineBottomDIP">150</integer>

    <!-- Configure ring lockscreen center ring offset -->
    <integer name="config_ringCenterOffsetDIP">30</integer>

    <!-- Configure ring lockscreen secondary ring icon size -->
    <integer name="config_ringSecIconSizeDIP">40</integer>

    <!-- Configure ring lockscreen secondary ring offset -->
    <integer name="config_ringSecBaselineOffsetDIP">30</integer>

    <!-- Configure ring lockscreen center secondary ring(s) offset -->
    <integer name="config_ringSecCenterOffsetDIP">30</integer>

    <!-- Enable permissions management -->
    <bool name="config_enablePermissionsManagement">false</bool>

    <!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD -->
    <string-array name="config_twoDigitNumberPattern">
    </string-array>

    <!-- Contains a list of vendor specific services to start via ServiceManager.
         Format for each item is: <path_to_service_jar_file>:<service_class_name> -->
    <string-array name="config_vendorServices">
    </string-array>

    <!-- ************************************************
         *                                              *
         *    GLOBAL DEFAULT VALUES FOR CM SETTINGS     *
         *                                              *
         ************************************************

         if you wanna change a behavior for your device,
         just copy that value to your overlay file and
         set it as you like -->

    <!-- these values should be default for all phone devices! -->

    <!-- toggles weather device is tablet or phone. right now,
    tablets are know to have soft buttons, but phones have harware
    buttons. this might change in the future - especially when the
    honeycomb modifications become available for phones -->
    <bool name="cm_default_is_tablet">false</bool>

    <!-- toggles weather device uses soft buttons or got hardware
    buttons. as the time of writing for android 2.3.3. all soft button
    enabled devices are tablets, all disabled are phones. -->
    <bool name="cm_default_has_soft_buttons">false</bool>

    <!-- if true, status bar is shown on bottom by default -->
    <bool name="cm_default_bottom_status_bar">false</bool>

    <!-- if true, dead zone is activated, which disables pull
    out of the status bar on the middle area - i.e. for people
    who start drag-out events accidently while trying to hit
    the space key -->
    <bool name="cm_default_use_dead_zone">false</bool>

    <!-- if true, soft buttons shown on left, false show them on
    right side of status bar -->
    <bool name="cm_default_soft_buttons_left">true</bool>

    <!-- toggle which buttons to show if soft buttons enabled
    quickna: opens notification area with the press of one button
    instead of swiping the long way up/down on big tablets -->
    <bool name="cm_default_show_soft_home">true</bool>
    <bool name="cm_default_show_soft_menu">true</bool>
    <bool name="cm_default_show_soft_back">true</bool>
    <bool name="cm_default_show_soft_search">false</bool>
    <bool name="cm_default_show_soft_quick_na">true</bool>

    <!-- disables display of lockscreen both on boot as on
    power button press to wake devices. usful for devices you
    dont carry in pockets -->
    <bool name="cm_default_disable_lockscreen">false</bool>

    <!--  option only available for devices with soft buttons.
    when enabled, fullscreen apps show the status bar. status
    bar then gets an adition hide button to switch to real
    fullscreen  -->
    <bool name="cm_default_disable_fullscreen">false</bool>

    <!-- toggles which button to use to unhide the status bar
    to show soft buttons again (see last comment). this is an
    index. to know, which index matches which button, see
    arrays.xml of CMParts. at the bottom of this file, menu
    entries like "menu, back, home" are mapped to indexes -->
    <integer name="cm_default_unhide_button_index">0</integer>

    <!-- when enabled, the power menu (shown when long-pressing
    power... includes reboot and power off) is extended by
    some more options which reflect the soft keys. ignored if soft
    keys are disabled -->
    <bool name="cm_default_extend_power_menu">false</bool>

    <!--  toggles which buttons to show on extended power menu.
    ignored if power menu disabled -->
    <bool name="cm_default_power_menu_home">true</bool>
    <bool name="cm_default_power_menu_menu">true</bool>
    <bool name="cm_default_power_menu_back">true</bool>

    <!--  toggles behavior of volume buttons. default (false) triggers
    volume change when pressing, user action when long-pressing. enabling
    (true) this option reverses this behavior -->
    <bool name="cm_default_reverse_volume_behavior">false</bool>

    <!-- defines the action of the volume buttons. for volume up,
    volume down, both press and both long-press. this is an
    index. to know, which index matches which button, see
    arrays.xml of CMParts. at the bottom of that file, menu
    entries like "menu, back, home" are mapped to indexes -->
    <integer name="cm_default_remapped_long_vol_up_index">0</integer>
    <integer name="cm_default_remapped_long_vol_down_index">0</integer>
    <integer name="cm_default_remapped_both_vol_index">0</integer>
    <integer name="cm_default_remapped_long_both_vol_index">0</integer>

    <!-- Devices with WVGA resolution and mdpi density need this
    workaround to prevent the recent applications dialog from randomly
    using HVGA dimensions. It's likely that other high res/low dpi
    combinations will need this too. -->
    <bool name="cm_default_recentapps_tablet_workaround">false</bool>

    <!-- Set this to true to get data working on some Motorola phones -->
    <bool name="config_rilNeedsNullPath">false</bool>

    <!-- The VoiceMail default value is displayed to my own number if it is true -->
    <bool name="config_telephony_use_own_number_for_voicemail">false</bool>

    <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder.
         If false, decoded by Latin decoder. -->
    <bool name="config_sms_utf8_support">false</bool>

    <!-- If this value is true, The mms content-disposition field is supported correctly.
         If false, Content-disposition fragments are ignored -->
    <bool name="config_mms_content_disposition_support">true</bool>

    <!-- If this value is true, the carrier supports sms delivery reports.
         If false, sms delivery reports are not supported and the preference
         option to enable/disable delivery reports is removed in the Messaging app. -->
    <bool name="config_sms_delivery_reports_support">true</bool>

    <!-- If this value is true, the carrier supports mms delivery reports.
         If false, mms delivery reports are not supported and the preference
         option to enable/disable delivery reports is removed in the Messaging app. -->
    <bool name="config_mms_delivery_reports_support">true</bool>

    <!-- If this value is true, the carrier supports mms read reports.
         If false, mms read reports are not supported and the preference
         option to enable/disable read reports is removed in the Messaging app. -->
    <bool name="config_mms_read_reports_support">true</bool>

    <!-- National Language Identifier codes for the following two config items.
         (from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1):
          0  - reserved
          1  - Turkish
          2  - Spanish (single shift table only)
          3  - Portuguese
          4  - Bengali
          5  - Gujarati
          6  - Hindi
          7  - Kannada
          8  - Malayalam
          9  - Oriya
         10  - Punjabi
         11  - Tamil
         12  - Telugu
         13  - Urdu
         14+ - reserved -->

    <!-- National language single shift tables to enable for SMS encoding.
         Decoding is always enabled. 3GPP TS 23.038 states that this feature
         should not be enabled until a formal request is issued by the relevant
         national regulatory body. Array elements are codes from the table above.
         Example 1: devices sold in Turkey must include table 1 to conform with
           By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf)
         Example 2: devices sold in India should include tables 4 through 13
           to enable use of the new Release 9 tables for Indic languages. -->
    <integer-array name="config_sms_enabled_single_shift_tables"></integer-array>

    <!-- National language locking shift tables to enable for SMS encoding.
         Decoding is always enabled. 3GPP TS 23.038 states that this feature
         should not be enabled until a formal request is issued by the relevant
         national regulatory body. Array elements are codes from the table above.
         Example 1: devices sold in Turkey must include table 1 after the
           Turkish Telecommunication Authority requires locking shift encoding
           to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf)
           See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014
         Example 2: devices sold in India should include tables 4 through 13
         to enable use of the new Release 9 tables for Indic languages. -->
    <integer-array name="config_sms_enabled_locking_shift_tables"></integer-array>

    <!-- Set and Unsets WiMAX -->
    <bool name="config_wimaxEnabled">false</bool>
    <!-- Location of the wimax framwork jar location -->
    <string name="config_wimaxServiceJarLocation"></string>
    <!-- Location of the wimax native library locaiton -->
    <string name="config_wimaxNativeLibLocation"></string>
    <!-- Name of the wimax manager class -->
    <string name="config_wimaxManagerClassname"></string>
    <!-- Name of the wimax service class -->
    <string name="config_wimaxServiceClassname"></string>
    <!-- Name of the wimax state tracker clas -->
    <string name="config_wimaxStateTrackerClassname"></string>

    <!-- Set to true if the RSSI should always display CDMA signal strength
         even on EVDO -->
    <bool name="config_alwaysUseCdmaRssi">false</bool>

    <!-- If this value is true, duplicate Source/Destination port fields
         in WDP header of some carriers OMADM wap push are supported.
         ex: MSGTYPE-TotalSegments-CurrentSegment
             -SourcePortDestPort-SourcePortDestPort-OMADM PDU
         If false, not supported. -->
    <bool name="config_duplicate_port_omadm_wappush">false</bool>

    <!-- Location of the Authentec framework jar -->
    <string name="config_authentecJarLocation"></string>
</resources>