Initial Bluetooth open source release

Change-Id: I27bb95db854806d7deedaf6c622b17cb09f62f16

7 files changed, 1262 insertions, 0 deletions

diff --git a/include/hardware/bluetooth.h b/include/hardware/bluetooth.h
new file mode 100644
index 0000000..be7f0b1
--- /dev/null
+++ b/include/hardware/bluetooth.h
@@ -0,0 +1,441 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BLUETOOTH_H
+#define ANDROID_INCLUDE_BLUETOOTH_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+/**
+ * The Bluetooth Hardware Module ID
+ */
+
+#define BT_HARDWARE_MODULE_ID "bluetooth"
+#define BT_STACK_MODULE_ID "bluetooth"
+#define BT_STACK_TEST_MODULE_ID "bluetooth_test"
+
+
+/* Bluetooth profile interface IDs */
+
+#define BT_PROFILE_HANDSFREE_ID "handsfree"
+#define BT_PROFILE_ADVANCED_AUDIO_ID "a2dp"
+#define BT_PROFILE_HEALTH_ID "health"
+#define BT_PROFILE_SOCKETS_ID "socket"
+#define BT_PROFILE_HIDHOST_ID "hidhost"
+#define BT_PROFILE_PAN_ID "pan"
+
+
+/** Bluetooth Address */
+typedef struct {
+    uint8_t address[6];
+} __attribute__((packed))bt_bdaddr_t;
+
+/** Bluetooth Device Name */
+typedef struct {
+    uint8_t name[248];
+} __attribute__((packed))bt_bdname_t;
+
+/** Bluetooth Adapter Visibility Modes*/
+typedef enum {
+    BT_SCAN_MODE_NONE,
+    BT_SCAN_MODE_CONNECTABLE,
+    BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE
+} bt_scan_mode_t;
+
+/** Bluetooth Adapter State */
+typedef enum {
+    BT_STATE_OFF,
+    BT_STATE_ON
+}   bt_state_t;
+
+/** Bluetooth Error Status */
+/** We need to build on this */
+
+typedef enum {
+    BT_STATUS_SUCCESS,
+    BT_STATUS_FAIL,
+    BT_STATUS_NOT_READY,
+    BT_STATUS_NOMEM,
+    BT_STATUS_BUSY,
+    BT_STATUS_DONE,        /* request already completed */
+    BT_STATUS_UNSUPPORTED,
+    BT_STATUS_PARM_INVALID,
+    BT_STATUS_UNHANDLED,
+    BT_STATUS_AUTH_FAILURE,
+    BT_STATUS_RMT_DEV_DOWN
+
+} bt_status_t;
+
+/** Bluetooth PinKey Code */
+typedef struct {
+    uint8_t pin[16];
+} __attribute__((packed))bt_pin_code_t;
+
+/** Bluetooth Adapter Discovery state */
+typedef enum {
+    BT_DISCOVERY_STOPPED,
+    BT_DISCOVERY_STARTED
+} bt_discovery_state_t;
+
+/** Bluetooth ACL connection state */
+typedef enum {
+    BT_ACL_STATE_CONNECTED,
+    BT_ACL_STATE_DISCONNECTED
+} bt_acl_state_t;
+
+/** Bluetooth 128-bit UUID */
+typedef struct {
+   uint8_t uu[16];
+} bt_uuid_t;
+
+/** Bluetooth SDP service record */
+typedef struct
+{
+   bt_uuid_t uuid;
+   uint16_t channel;
+   char name[256]; // what's the maximum length
+} bt_service_record_t;
+
+/* Bluetooth Adapter and Remote Device property types */
+typedef enum {
+    /* Properties common to both adapter and remote device */
+    /**
+     * Description - Bluetooth Device Name
+     * Access mode - Adapter name can be GET/SET. Remote device can be GET
+     * Data type   - bt_bdname_t
+     */
+    BT_PROPERTY_BDNAME = 0x1,
+    /**
+     * Description - Bluetooth Device Address
+     * Access mode - Only GET.
+     * Data type   - bt_bdaddr_t
+     */
+    BT_PROPERTY_BDADDR,
+    /**
+     * Description - Bluetooth Service 128-bit UUIDs
+     * Access mode - Only GET.
+     * Data type   - Array of bt_uuid_t (Array size inferred from property length).
+     */
+    BT_PROPERTY_UUIDS,
+    /**
+     * Description - Bluetooth Class of Device as found in Assigned Numbers
+     * Access mode - Only GET.
+     * Data type   - uint32_t.
+     */
+    BT_PROPERTY_CLASS_OF_DEVICE,
+    /**
+     * Description - Device Type - BREDR, BLE or DUAL Mode
+     * Access mode - Only GET.
+     * Data type   - bt_device_type_t
+     */
+    BT_PROPERTY_TYPE_OF_DEVICE,
+    /**
+     * Description - Bluetooth Service Record
+     * Access mode - Only GET.
+     * Data type   - bt_service_record_t
+     */
+    BT_PROPERTY_SERVICE_RECORD,
+
+    /* Properties unique to adapter */
+    /**
+     * Description - Bluetooth Adapter scan mode
+     * Access mode - GET and SET
+     * Data type   - bt_scan_mode_t.
+     */
+    BT_PROPERTY_ADAPTER_SCAN_MODE,
+    /**
+     * Description - List of bonded devices
+     * Access mode - Only GET.
+     * Data type   - Array of bt_bdaddr_t of the bonded remote devices
+     *               (Array size inferred from property length).
+     */
+    BT_PROPERTY_ADAPTER_BONDED_DEVICES,
+    /**
+     * Description - Bluetooth Adapter Discovery timeout (in seconds)
+     * Access mode - GET and SET
+     * Data type   - uint32_t
+     */
+    BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT,
+
+    /* Properties unique to remote device */
+    /**
+     * Description - User defined friendly name of the remote device
+     * Access mode - GET and SET
+     * Data type   - bt_bdname_t.
+     */
+    BT_PROPERTY_REMOTE_FRIENDLY_NAME,
+    /**
+     * Description - RSSI value of the inquired remote device
+     * Access mode - Only GET.
+     * Data type   - int32_t.
+     */
+    BT_PROPERTY_REMOTE_RSSI,
+
+    BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP = 0xFF,
+} bt_property_type_t;
+
+/** Bluetooth Adapter Property data structure */
+typedef struct
+{
+    bt_property_type_t type;
+    int len;
+    void *val;
+} bt_property_t;
+
+/** Bluetooth Device Type */
+typedef enum {
+    BT_DEVICE_DEVTYPE_BREDR = 0x1,
+    BT_DEVICE_DEVTYPE_BLE,
+    BT_DEVICE_DEVTYPE_DUAL
+} bt_device_type_t;
+/** Bluetooth Bond state */
+typedef enum {
+    BT_BOND_STATE_NONE,
+    BT_BOND_STATE_BONDING,
+    BT_BOND_STATE_BONDED
+} bt_bond_state_t;
+
+/** Bluetooth SSP Bonding Variant */
+typedef enum {
+    BT_SSP_VARIANT_PASSKEY_CONFIRMATION,
+    BT_SSP_VARIANT_PASSKEY_ENTRY,
+    BT_SSP_VARIANT_CONSENT,
+    BT_SSP_VARIANT_PASSKEY_NOTIFICATION
+} bt_ssp_variant_t;
+
+#define BT_MAX_NUM_UUIDS 32
+
+/** Bluetooth Interface callbacks */
+
+/** Bluetooth Enable/Disable Callback. */
+typedef void (*adapter_state_changed_callback)(bt_state_t state);
+
+/** GET/SET Adapter Properties callback */
+/* TODO: For the GET/SET property APIs/callbacks, we may need a session
+ * identifier to associate the call with the callback. This would be needed
+ * whenever more than one simultaneous instance of the same adapter_type
+ * is get/set.
+ *
+ * If this is going to be handled in the Java framework, then we do not need
+ * to manage sessions here.
+ */
+typedef void (*adapter_properties_callback)(bt_status_t status,
+                                               int num_properties,
+                                               bt_property_t *properties);
+
+/** GET/SET Remote Device Properties callback */
+/** TODO: For remote device properties, do not see a need to get/set
+ * multiple properties - num_properties shall be 1
+ */
+typedef void (*remote_device_properties_callback)(bt_status_t status,
+                                                       bt_bdaddr_t *bd_addr,
+                                                       int num_properties,
+                                                       bt_property_t *properties);
+
+/** New device discovered callback */
+/** If EIR data is not present, then BD_NAME and RSSI shall be NULL and -1
+ * respectively */
+typedef void (*device_found_callback)(int num_properties,
+                                         bt_property_t *properties);
+
+/** Discovery state changed callback */
+typedef void (*discovery_state_changed_callback)(bt_discovery_state_t state);
+
+/** Bluetooth Legacy PinKey Request callback */
+typedef void (*pin_request_callback)(bt_bdaddr_t *remote_bd_addr,
+                                        bt_bdname_t *bd_name, uint32_t cod);
+
+/** Bluetooth SSP Request callback - Just Works & Numeric Comparison*/
+/** pass_key - Shall be 0 for BT_SSP_PAIRING_VARIANT_CONSENT &
+ *  BT_SSP_PAIRING_PASSKEY_ENTRY */
+/* TODO: Passkey request callback shall not be needed for devices with display
+ * capability. We still need support this in the stack for completeness */
+typedef void (*ssp_request_callback)(bt_bdaddr_t *remote_bd_addr,
+                                        bt_bdname_t *bd_name,
+                                        uint32_t cod,
+                                        bt_ssp_variant_t pairing_variant,
+                                     uint32_t pass_key);
+
+/** Bluetooth Bond state changed callback */
+/* Invoked in response to create_bond, cancel_bond or remove_bond */
+typedef void (*bond_state_changed_callback)(bt_status_t status,
+                                               bt_bdaddr_t *remote_bd_addr,
+                                               bt_bond_state_t state);
+
+/** Bluetooth ACL connection state changed callback */
+typedef void (*acl_state_changed_callback)(bt_status_t status, bt_bdaddr_t *remote_bd_addr,
+                                            bt_acl_state_t state);
+
+typedef enum {
+    ASSOCIATE_JVM,
+    DISASSOCIATE_JVM
+} bt_cb_thread_evt;
+
+/** Thread Associate/Disassociate JVM Callback */
+/* Callback that is invoked by the callback thread to allow upper layer to attach/detach to/from
+ * the JVM */
+typedef void (*callback_thread_event)(bt_cb_thread_evt evt);
+
+/** Bluetooth Test Mode Callback */
+/* Receive any HCI event from controller. Must be in DUT Mode for this callback to be received */
+typedef void (*dut_mode_recv_callback)(uint16_t opcode, uint8_t *buf, uint8_t len);
+
+/** TODO: Add callbacks for Link Up/Down and other generic
+  *  notifications/callbacks */
+
+/** Bluetooth DM callback structure. */
+typedef struct {
+    /** set to sizeof(bt_callbacks_t) */
+    size_t size;
+    adapter_state_changed_callback adapter_state_changed_cb;
+    adapter_properties_callback adapter_properties_cb;
+    remote_device_properties_callback remote_device_properties_cb;
+    device_found_callback device_found_cb;
+    discovery_state_changed_callback discovery_state_changed_cb;
+    pin_request_callback pin_request_cb;
+    ssp_request_callback ssp_request_cb;
+    bond_state_changed_callback bond_state_changed_cb;
+    acl_state_changed_callback acl_state_changed_cb;
+    callback_thread_event thread_evt_cb;
+    dut_mode_recv_callback dut_mode_recv_cb;
+} bt_callbacks_t;
+
+/** NOTE: By default, no profiles are initialized at the time of init/enable.
+ *  Whenever the application invokes the 'init' API of a profile, then one of
+ *  the following shall occur:
+ *
+ *    1.) If Bluetooth is not enabled, then the Bluetooth core shall mark the
+ *        profile as enabled. Subsequently, when the application invokes the
+ *        Bluetooth 'enable', as part of the enable sequence the profile that were
+ *        marked shall be enabled by calling appropriate stack APIs. The
+ *        'adapter_properties_cb' shall return the list of UUIDs of the
+ *        enabled profiles.
+ *
+ *    2.) If Bluetooth is enabled, then the Bluetooth core shall invoke the stack
+ *        profile API to initialize the profile and trigger a
+ *        'adapter_properties_cb' with the current list of UUIDs including the
+ *        newly added profile's UUID.
+ *
+ *   The reverse shall occur whenever the profile 'cleanup' APIs are invoked
+ */
+
+/** Represents the standard Bluetooth DM interface. */
+typedef struct {
+    /** set to sizeof(bt_interface_t) */
+    size_t size;
+    /**
+     * Opens the interface and provides the callback routines
+     * to the implemenation of this interface.
+     */
+    int (*init)(bt_callbacks_t* callbacks );
+
+    /** Enable Bluetooth. */
+    int (*enable)(void);
+
+    /** Disable Bluetooth. */
+    int (*disable)(void);
+
+    /** Closes the interface. */
+    void (*cleanup)(void);
+
+    /** Get all Bluetooth Adapter properties at init */
+    int (*get_adapter_properties)(void);
+
+    /** Get Bluetooth Adapter property of 'type' */
+    int (*get_adapter_property)(bt_property_type_t type);
+
+    /** Set Bluetooth Adapter property of 'type' */
+    /* Based on the type, val shall be one of
+     * bt_bdaddr_t or bt_bdname_t or bt_scanmode_t etc
+     */
+    int (*set_adapter_property)(const bt_property_t *property);
+
+    /** Get all Remote Device properties */
+    int (*get_remote_device_properties)(bt_bdaddr_t *remote_addr);
+
+    /** Get Remote Device property of 'type' */
+    int (*get_remote_device_property)(bt_bdaddr_t *remote_addr,
+                                      bt_property_type_t type);
+
+    /** Set Remote Device property of 'type' */
+    int (*set_remote_device_property)(bt_bdaddr_t *remote_addr,
+                                      const bt_property_t *property);
+
+    /** Get Remote Device's service record  for the given UUID */
+    int (*get_remote_service_record)(bt_bdaddr_t *remote_addr,
+                                     bt_uuid_t *uuid);
+
+    /** Start SDP to get remote services */
+    int (*get_remote_services)(bt_bdaddr_t *remote_addr);
+
+    /** Start Discovery */
+    int (*start_discovery)(void);
+
+    /** Cancel Discovery */
+    int (*cancel_discovery)(void);
+
+    /** Create Bluetooth Bonding */
+    int (*create_bond)(const bt_bdaddr_t *bd_addr);
+
+    /** Remove Bond */
+    int (*remove_bond)(const bt_bdaddr_t *bd_addr);
+
+    /** Cancel Bond */
+    int (*cancel_bond)(const bt_bdaddr_t *bd_addr);
+
+    /** BT Legacy PinKey Reply */
+    /** If accept==FALSE, then pin_len and pin_code shall be 0x0 */
+    int (*pin_reply)(const bt_bdaddr_t *bd_addr, uint8_t accept,
+                     uint8_t pin_len, bt_pin_code_t *pin_code);
+
+    /** BT SSP Reply - Just Works, Numeric Comparison and Passkey
+     * passkey shall be zero for BT_SSP_VARIANT_PASSKEY_COMPARISON &
+     * BT_SSP_VARIANT_CONSENT
+     * For BT_SSP_VARIANT_PASSKEY_ENTRY, if accept==FALSE, then passkey
+     * shall be zero */
+    int (*ssp_reply)(const bt_bdaddr_t *bd_addr, bt_ssp_variant_t variant,
+                     uint8_t accept, uint32_t passkey);
+
+    /** Get Bluetooth profile interface */
+    const void* (*get_profile_interface) (const char *profile_id);
+
+    /** Bluetooth Test Mode APIs - Bluetooth must be enabled for these APIs */
+    /* Configure DUT Mode - Use this mode to enter/exit DUT mode */
+    int (*dut_mode_configure)(uint8_t enable);
+
+    /* Send any test HCI (vendor-specific) command to the controller. Must be in DUT Mode */
+    int (*dut_mode_send)(uint16_t opcode, uint8_t *buf, uint8_t len);
+} bt_interface_t;
+
+/** TODO: Need to add APIs for Service Discovery, Service authorization and
+  *       connection management. Also need to add APIs for configuring
+  *       properties of remote bonded devices such as name, UUID etc. */
+
+typedef struct {
+    struct hw_device_t common;
+    const bt_interface_t* (*get_bluetooth_interface)();
+} bluetooth_device_t;
+
+typedef bluetooth_device_t bluetooth_module_t;
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BLUETOOTH_H */
diff --git a/include/hardware/bt_av.h b/include/hardware/bt_av.h
new file mode 100644
index 0000000..2ec00c3
--- /dev/null
+++ b/include/hardware/bt_av.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BT_AV_H
+#define ANDROID_INCLUDE_BT_AV_H
+
+__BEGIN_DECLS
+
+/* Bluetooth AV connection states */
+typedef enum {
+    BTAV_CONNECTION_STATE_DISCONNECTED = 0,
+    BTAV_CONNECTION_STATE_CONNECTING,
+    BTAV_CONNECTION_STATE_CONNECTED,
+    BTAV_CONNECTION_STATE_DISCONNECTING
+} btav_connection_state_t;
+
+/* Bluetooth AV datapath states */
+typedef enum {
+    BTAV_AUDIO_STATE_REMOTE_SUSPEND = 0,
+    BTAV_AUDIO_STATE_STOPPED,
+    BTAV_AUDIO_STATE_STARTED,
+} btav_audio_state_t;
+
+
+/** Callback for connection state change.
+ *  state will have one of the values from btav_connection_state_t
+ */
+typedef void (* btav_connection_state_callback)(btav_connection_state_t state, 
+                                                    bt_bdaddr_t *bd_addr);
+
+/** Callback for audiopath state change.
+ *  state will have one of the values from btav_audio_state_t
+ */
+typedef void (* btav_audio_state_callback)(btav_audio_state_t state, 
+                                               bt_bdaddr_t *bd_addr);
+
+/** BT-AV callback structure. */
+typedef struct {
+    /** set to sizeof(btav_callbacks_t) */
+    size_t      size;
+    btav_connection_state_callback  connection_state_cb;
+    btav_audio_state_callback audio_state_cb;
+} btav_callbacks_t;
+
+/** 
+ * NOTE:
+ *
+ * 1. AVRCP 1.0 shall be supported initially. AVRCP passthrough commands
+ *    shall be handled internally via uinput 
+ *
+ * 2. A2DP data path shall be handled via a socket pipe between the AudioFlinger
+ *    android_audio_hw library and the Bluetooth stack.
+ * 
+ */
+/** Represents the standard BT-AV interface. */
+typedef struct {
+
+    /** set to sizeof(btav_interface_t) */
+    size_t          size;
+    /**
+     * Register the BtAv callbacks
+     */
+    bt_status_t (*init)( btav_callbacks_t* callbacks );
+
+    /** connect to headset */
+    bt_status_t (*connect)( bt_bdaddr_t *bd_addr );
+
+    /** dis-connect from headset */
+    bt_status_t (*disconnect)( bt_bdaddr_t *bd_addr );
+
+    /** Closes the interface. */
+    void  (*cleanup)( void );
+} btav_interface_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BT_AV_H */
diff --git a/include/hardware/bt_hf.h b/include/hardware/bt_hf.h
new file mode 100644
index 0000000..6135ac4
--- /dev/null
+++ b/include/hardware/bt_hf.h
@@ -0,0 +1,284 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BT_HF_H
+#define ANDROID_INCLUDE_BT_HF_H
+
+__BEGIN_DECLS
+
+/* AT response code - OK/Error */
+typedef enum {
+    BTHF_AT_RESPONSE_ERROR = 0,
+    BTHF_AT_RESPONSE_OK
+} bthf_at_response_t;
+
+typedef enum {
+    BTHF_CONNECTION_STATE_DISCONNECTED = 0,
+    BTHF_CONNECTION_STATE_CONNECTING,
+    BTHF_CONNECTION_STATE_CONNECTED,
+    BTHF_CONNECTION_STATE_SLC_CONNECTED,
+    BTHF_CONNECTION_STATE_DISCONNECTING
+} bthf_connection_state_t;
+
+typedef enum {
+    BTHF_AUDIO_STATE_DISCONNECTED = 0,
+    BTHF_AUDIO_STATE_CONNECTING,
+    BTHF_AUDIO_STATE_CONNECTED,
+    BTHF_AUDIO_STATE_DISCONNECTING
+} bthf_audio_state_t;
+
+typedef enum {
+    BTHF_VR_STATE_STOPPED = 0,
+    BTHF_VR_STATE_STARTED
+} bthf_vr_state_t;
+
+typedef enum {
+    BTHF_VOLUME_TYPE_SPK = 0,
+    BTHF_VOLUME_TYPE_MIC
+} bthf_volume_type_t;
+
+/* Noise Reduction and Echo Cancellation */
+typedef enum
+{
+    BTHF_NREC_STOP,
+    BTHF_NREC_START
+} bthf_nrec_t;
+
+/* CHLD - Call held handling */
+typedef enum
+{
+    BTHF_CHLD_TYPE_RELEASEHELD,              // Terminate all held or set UDUB("busy") to a waiting call
+    BTHF_CHLD_TYPE_RELEASEACTIVE_ACCEPTHELD, // Terminate all active calls and accepts a waiting/held call
+    BTHF_CHLD_TYPE_HOLDACTIVE_ACCEPTHELD,    // Hold all active calls and accepts a waiting/held call
+    BTHF_CHLD_TYPE_ADDHELDTOCONF,            // Add all held calls to a conference
+} bthf_chld_type_t;
+
+/** Callback for connection state change.
+ *  state will have one of the values from BtHfConnectionState
+ */
+typedef void (* bthf_connection_state_callback)(bthf_connection_state_t state, bt_bdaddr_t *bd_addr);
+
+/** Callback for audio connection state change.
+ *  state will have one of the values from BtHfAudioState
+ */
+typedef void (* bthf_audio_state_callback)(bthf_audio_state_t state, bt_bdaddr_t *bd_addr);
+
+/** Callback for VR connection state change.
+ *  state will have one of the values from BtHfVRState
+ */
+typedef void (* bthf_vr_cmd_callback)(bthf_vr_state_t state);
+
+/** Callback for answer incoming call (ATA)
+ */
+typedef void (* bthf_answer_call_cmd_callback)();
+
+/** Callback for disconnect call (AT+CHUP)
+ */
+typedef void (* bthf_hangup_call_cmd_callback)();
+
+/** Callback for disconnect call (AT+CHUP)
+ *  type will denote Speaker/Mic gain (BtHfVolumeControl).
+ */
+typedef void (* bthf_volume_cmd_callback)(bthf_volume_type_t type, int volume);
+
+/** Callback for dialing an outgoing call
+ *  If number is NULL, redial
+ */
+typedef void (* bthf_dial_call_cmd_callback)(char *number);
+
+/** Callback for sending DTMF tones
+ *  tone contains the dtmf character to be sent
+ */
+typedef void (* bthf_dtmf_cmd_callback)(char tone);
+
+/** Callback for enabling/disabling noise reduction/echo cancellation
+ *  value will be 1 to enable, 0 to disable
+ */
+typedef void (* bthf_nrec_cmd_callback)(bthf_nrec_t nrec);
+
+/** Callback for call hold handling (AT+CHLD)
+ *  value will contain the call hold command (0, 1, 2, 3)
+ */
+typedef void (* bthf_chld_cmd_callback)(bthf_chld_type_t chld);
+
+/** Callback for CNUM (subscriber number)
+ */
+typedef void (* bthf_cnum_cmd_callback)();
+
+/** Callback for indicators (CIND)
+ */
+typedef void (* bthf_cind_cmd_callback)();
+
+/** Callback for operator selection (COPS)
+ */
+typedef void (* bthf_cops_cmd_callback)();
+
+/** Callback for call list (AT+CLCC)
+ */
+typedef void (* bthf_clcc_cmd_callback) ();
+
+/** Callback for unknown AT command recd from HF
+ *  at_string will contain the unparsed AT string
+ */
+typedef void (* bthf_unknown_at_cmd_callback)(char *at_string);
+
+/** Callback for keypressed (HSP) event.
+ */
+typedef void (* bthf_key_pressed_cmd_callback)();
+
+/** BT-HF callback structure. */
+typedef struct {
+    /** set to sizeof(BtHfCallbacks) */
+    size_t      size;
+    bthf_connection_state_callback  connection_state_cb;
+    bthf_audio_state_callback       audio_state_cb;
+    bthf_vr_cmd_callback            vr_cmd_cb;
+    bthf_answer_call_cmd_callback   answer_call_cmd_cb;
+    bthf_hangup_call_cmd_callback   hangup_call_cmd_cb;
+    bthf_volume_cmd_callback        volume_cmd_cb;
+    bthf_dial_call_cmd_callback     dial_call_cmd_cb;
+    bthf_dtmf_cmd_callback          dtmf_cmd_cb;
+    bthf_nrec_cmd_callback          nrec_cmd_cb;
+    bthf_chld_cmd_callback          chld_cmd_cb;
+    bthf_cnum_cmd_callback          cnum_cmd_cb;
+    bthf_cind_cmd_callback          cind_cmd_cb;
+    bthf_cops_cmd_callback          cops_cmd_cb;
+    bthf_clcc_cmd_callback          clcc_cmd_cb;
+    bthf_unknown_at_cmd_callback    unknown_at_cmd_cb;
+    bthf_key_pressed_cmd_callback   key_pressed_cmd_cb;
+} bthf_callbacks_t;
+
+/** Network Status */
+typedef enum
+{
+    BTHF_NETWORK_STATE_NOT_AVAILABLE = 0,
+    BTHF_NETWORK_STATE_AVAILABLE
+} bthf_network_state_t;
+
+/** Service type */
+typedef enum
+{
+    BTHF_SERVICE_TYPE_HOME = 0,
+    BTHF_SERVICE_TYPE_ROAMING
+} bthf_service_type_t;
+
+typedef enum {
+    BTHF_CALL_STATE_ACTIVE = 0,
+    BTHF_CALL_STATE_HELD,
+    BTHF_CALL_STATE_DIALING,
+    BTHF_CALL_STATE_ALERTING,
+    BTHF_CALL_STATE_INCOMING,
+    BTHF_CALL_STATE_WAITING,
+    BTHF_CALL_STATE_IDLE
+} bthf_call_state_t;
+
+typedef enum {
+    BTHF_CALL_DIRECTION_OUTGOING = 0,
+    BTHF_CALL_DIRECTION_INCOMING
+} bthf_call_direction_t;
+
+typedef enum {
+    BTHF_CALL_TYPE_VOICE = 0,
+    BTHF_CALL_TYPE_DATA,
+    BTHF_CALL_TYPE_FAX
+} bthf_call_mode_t;
+
+typedef enum {
+    BTHF_CALL_MPTY_TYPE_SINGLE = 0,
+    BTHF_CALL_MPTY_TYPE_MULTI
+} bthf_call_mpty_type_t;
+
+typedef enum {
+    BTHF_CALL_ADDRTYPE_UNKNOWN = 0x81,
+    BTHF_CALL_ADDRTYPE_INTERNATIONAL = 0x91
+} bthf_call_addrtype_t;
+/** Represents the standard BT-HF interface. */
+typedef struct {
+
+    /** set to sizeof(BtHfInterface) */
+    size_t          size;
+    /**
+     * Register the BtHf callbacks
+     */
+    bt_status_t (*init)( bthf_callbacks_t* callbacks );
+
+    /** connect to headset */
+    bt_status_t (*connect)( bt_bdaddr_t *bd_addr );
+
+    /** dis-connect from headset */
+    bt_status_t (*disconnect)( bt_bdaddr_t *bd_addr );
+
+    /** create an audio connection */
+    bt_status_t (*connect_audio)( bt_bdaddr_t *bd_addr );
+
+    /** close the audio connection */
+    bt_status_t (*disconnect_audio)( bt_bdaddr_t *bd_addr );
+
+    /** start voice recognition */
+    bt_status_t (*start_voice_recognition)();
+
+    /** stop voice recognition */
+    bt_status_t (*stop_voice_recognition)();
+
+    /** volume control */
+    bt_status_t (*volume_control) (bthf_volume_type_t type, int volume);
+
+    /** Combined device status change notification */
+    bt_status_t (*device_status_notification)(bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int signal,
+                           int batt_chg);
+
+    /** Response for COPS command */
+    bt_status_t (*cops_response)(const char *cops);
+
+    /** Response for CIND command */
+    bt_status_t (*cind_response)(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state,
+                                 int signal, int roam, int batt_chg);
+
+    /** Pre-formatted AT response, typically in response to unknown AT cmd */
+    bt_status_t (*formatted_at_response)(const char *rsp);
+
+    /** ok/error response
+     *  ERROR (0)
+     *  OK    (1)
+     */
+    bt_status_t (*at_response) (bthf_at_response_t response_code, int error_code);
+
+    /** response for CLCC command 
+     *  Can be iteratively called for each call index
+     *  Call index of 0 will be treated as NULL termination (Completes response)
+     */
+    bt_status_t (*clcc_response) (int index, bthf_call_direction_t dir,
+                                bthf_call_state_t state, bthf_call_mode_t mode,
+                                bthf_call_mpty_type_t mpty, const char *number,
+                                bthf_call_addrtype_t type);
+
+    /** notify of a call state change
+     *  Each update notifies 
+     *    1. Number of active/held/ringing calls
+     *    2. call_state: This denotes the state change that triggered this msg
+     *                   This will take one of the values from BtHfCallState
+     *    3. number & type: valid only for incoming & waiting call
+    */
+    bt_status_t (*phone_state_change) (int num_active, int num_held, bthf_call_state_t call_setup_state,
+                                       const char *number, bthf_call_addrtype_t type);
+
+    /** Closes the interface. */
+    void  (*cleanup)( void );
+} bthf_interface_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BT_HF_H */
diff --git a/include/hardware/bt_hh.h b/include/hardware/bt_hh.h
new file mode 100644
index 0000000..09f547b
--- /dev/null
+++ b/include/hardware/bt_hh.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BT_HH_H
+#define ANDROID_INCLUDE_BT_HH_H
+
+#include <stdint.h>
+
+__BEGIN_DECLS
+
+#define BTHH_MAX_DSC_LEN   884
+
+/* HH connection states */
+typedef enum
+{
+    BTHH_CONN_STATE_CONNECTED              = 0,
+    BTHH_CONN_STATE_CONNECTING,
+    BTHH_CONN_STATE_DISCONNECTED,
+    BTHH_CONN_STATE_DISCONNECTING,
+    BTHH_CONN_STATE_FAILED_MOUSE_FROM_HOST,
+    BTHH_CONN_STATE_FAILED_KBD_FROM_HOST,
+    BTHH_CONN_STATE_FAILED_TOO_MANY_DEVICES,
+    BTHH_CONN_STATE_FAILED_NO_BTHID_DRIVER,
+    BTHH_CONN_STATE_FAILED_GENERIC,
+    BTHH_CONN_STATE_UNKNOWN
+} bthh_connection_state_t;
+
+typedef enum
+{
+    BTHH_OK                = 0,
+    BTHH_HS_HID_NOT_READY,        /* handshake error : device not ready */
+    BTHH_HS_INVALID_RPT_ID,       /* handshake error : invalid report ID */
+    BTHH_HS_TRANS_NOT_SPT,        /* handshake error : transaction not spt */
+    BTHH_HS_INVALID_PARAM,        /* handshake error : invalid paremter */
+    BTHH_HS_ERROR,                /* handshake error : unspecified HS error */
+    BTHH_ERR,                     /* general BTA HH error */
+    BTHH_ERR_SDP,                 /* SDP error */
+    BTHH_ERR_PROTO,               /* SET_Protocol error,
+                                                                only used in BTA_HH_OPEN_EVT callback */
+    BTHH_ERR_DB_FULL,             /* device database full error, used  */
+    BTHH_ERR_TOD_UNSPT,           /* type of device not supported */
+    BTHH_ERR_NO_RES,              /* out of system resources */
+    BTHH_ERR_AUTH_FAILED,         /* authentication fail */
+    BTHH_ERR_HDL
+}bthh_status_t;
+
+/* Protocol modes */
+typedef enum {
+    BTHH_REPORT_MODE       = 0x00,
+    BTHH_BOOT_MODE         = 0x01,
+    BTHH_UNSUPPORTED_MODE  = 0xff
+}bthh_protocol_mode_t;
+
+/* Report types */
+typedef enum {
+    BTHH_INPUT_REPORT      = 1,
+    BTHH_OUTPUT_REPORT,
+    BTHH_FEATURE_REPORT
+}bthh_report_type_t;
+
+typedef struct
+{
+    int         attr_mask;
+    uint8_t     sub_class;
+    uint8_t     app_id;
+    int         vendor_id;
+    int         product_id;
+    int         version;
+    uint8_t     ctry_code;
+    int         dl_len;
+    uint8_t     dsc_list[BTHH_MAX_DSC_LEN];
+} bthh_hid_info_t;
+
+/** Callback for connection state change.
+ *  state will have one of the values from bthh_connection_state_t
+ */
+typedef void (* bthh_connection_state_callback)(bt_bdaddr_t *bd_addr, bthh_connection_state_t state);
+
+/** Callback for vitual unplug api.
+ *  the status of the vitual unplug
+ */
+typedef void (* bthh_virtual_unplug_callback)(bt_bdaddr_t *bd_addr, bthh_status_t hh_status);
+
+/** Callback for get hid info
+ *  hid_info will contain attr_mask, sub_class, app_id, vendor_id, product_id, version, ctry_code, len
+ */
+typedef void (* bthh_hid_info_callback)(bt_bdaddr_t *bd_addr, bthh_hid_info_t hid_info);
+
+/** Callback for get/set protocal api.
+ *  the protocol mode is one of the value from bthh_protocol_mode_t
+ */
+typedef void (* bthh_protocol_mode_callback)(bt_bdaddr_t *bd_addr, bthh_status_t hh_status,bthh_protocol_mode_t mode);
+
+/** Callback for get/set_idle_time api.
+ */
+typedef void (* bthh_idle_time_callback)(bt_bdaddr_t *bd_addr, bthh_status_t hh_status, int idle_rate);
+
+
+/** Callback for get report api.
+ *  if staus is ok rpt_data contains the report data
+ */
+typedef void (* bthh_get_report_callback)(bt_bdaddr_t *bd_addr, bthh_status_t hh_status, uint8_t* rpt_data, int rpt_size);
+
+
+/** BT-HH callback structure. */
+typedef struct {
+    /** set to sizeof(BtHfCallbacks) */
+    size_t      size;
+    bthh_connection_state_callback  connection_state_cb;
+    bthh_hid_info_callback          hid_info_cb;
+    bthh_protocol_mode_callback     protocol_mode_cb;
+    bthh_idle_time_callback         idle_time_cb;
+    bthh_get_report_callback        get_report_cb;
+    bthh_virtual_unplug_callback    virtual_unplug_cb;
+
+} bthh_callbacks_t;
+
+
+
+/** Represents the standard BT-HH interface. */
+typedef struct {
+
+    /** set to sizeof(BtHhInterface) */
+    size_t          size;
+
+    /**
+     * Register the BtHh callbacks
+     */
+    bt_status_t (*init)( bthh_callbacks_t* callbacks );
+
+    /** connect to hid device */
+    bt_status_t (*connect)( bt_bdaddr_t *bd_addr);
+
+    /** dis-connect from hid device */
+    bt_status_t (*disconnect)( bt_bdaddr_t *bd_addr );
+
+    /** Virtual UnPlug (VUP) the specified HID device */
+    bt_status_t (*virtual_unplug)(bt_bdaddr_t *bd_addr);
+
+    /** Set the HID device descriptor for the specified HID device. */
+    bt_status_t (*set_info)(bt_bdaddr_t *bd_addr, bthh_hid_info_t hid_info );
+
+    /** Get the HID proto mode. */
+    bt_status_t (*get_protocol) (bt_bdaddr_t *bd_addr, bthh_protocol_mode_t protocolMode);
+
+    /** Set the HID proto mode. */
+    bt_status_t (*set_protocol)(bt_bdaddr_t *bd_addr, bthh_protocol_mode_t protocolMode);
+
+    /** Send a GET_REPORT to HID device. */
+    bt_status_t (*get_report)(bt_bdaddr_t *bd_addr, bthh_report_type_t reportType, uint8_t reportId, int bufferSize);
+
+    /** Send a SET_REPORT to HID device. */
+    bt_status_t (*set_report)(bt_bdaddr_t *bd_addr, bthh_report_type_t reportType, char* report);
+
+    /** Send data to HID device. */
+    bt_status_t (*send_data)(bt_bdaddr_t *bd_addr, char* data);
+
+	/** Closes the interface. */
+    void  (*cleanup)( void );
+
+} bthh_interface_t;
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BT_HH_H */
+
+
diff --git a/include/hardware/bt_hl.h b/include/hardware/bt_hl.h
new file mode 100644
index 0000000..bd29e3a
--- /dev/null
+++ b/include/hardware/bt_hl.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BT_HL_H
+#define ANDROID_INCLUDE_BT_HL_H
+
+__BEGIN_DECLS
+
+/* HL connection states */
+
+typedef enum
+{
+    BTHL_MDEP_ROLE_SOURCE,
+    BTHL_MDEP_ROLE_SINK
+} bthl_mdep_role_t;
+
+typedef enum {
+    BTHL_APP_REG_STATE_REG_SUCCESS,
+    BTHL_APP_REG_STATE_REG_FAILED,
+    BTHL_APP_REG_STATE_DEREG_SUCCESS,
+    BTHL_APP_REG_STATE_DEREG_FAILED
+} bthl_app_reg_state_t;
+
+typedef enum
+{
+    BTHL_CHANNEL_TYPE_RELIABLE,
+    BTHL_CHANNEL_TYPE_STREAMING,
+    BTHL_CHANNEL_TYPE_ANY
+} bthl_channel_type_t;
+
+
+/* HL connection states */
+typedef enum {
+    BTHL_CONN_STATE_CONNECTING,
+    BTHL_CONN_STATE_CONNECTED,
+    BTHL_CONN_STATE_DISCONNECTING,
+    BTHL_CONN_STATE_DISCONNECTED,
+    BTHL_CONN_STATE_DESTROYED
+} bthl_channel_state_t;
+
+typedef struct
+{
+    bthl_mdep_role_t        mdep_role;
+    int                     data_type;
+    bthl_channel_type_t     channel_type;
+    const char                   *mdep_description; /* MDEP description to be used in the SDP (optional); null terminated */
+} bthl_mdep_cfg_t;
+
+typedef struct
+{
+    const char      *application_name;
+    const char      *provider_name;   /* provider name to be used in the SDP (optional); null terminated */
+    const char      *srv_name;        /* service name to be used in the SDP (optional); null terminated*/
+    const char      *srv_desp;        /* service description to be used in the SDP (optional); null terminated */
+    int             number_of_mdeps;
+    bthl_mdep_cfg_t *mdep_cfg;  /* Dynamic array */
+} bthl_reg_param_t;
+
+/** Callback for application registration status.
+ *  state will have one of the values from  bthl_app_reg_state_t
+ */
+typedef void (* bthl_app_reg_state_callback)(int app_id, bthl_app_reg_state_t state);
+
+/** Callback for channel connection state change.
+ *  state will have one of the values from
+ *  bthl_connection_state_t and fd (file descriptor)
+ */
+typedef void (* bthl_channel_state_callback)(int app_id, bt_bdaddr_t *bd_addr, int mdep_cfg_index, int channel_id, bthl_channel_state_t state, int fd);
+
+/** BT-HL callback structure. */
+typedef struct {
+    /** set to sizeof(bthl_callbacks_t) */
+    size_t      size;
+    bthl_app_reg_state_callback     app_reg_state_cb;
+    bthl_channel_state_callback     channel_state_cb;
+} bthl_callbacks_t;
+
+
+/** Represents the standard BT-HL interface. */
+typedef struct {
+
+    /** set to sizeof(bthl_interface_t)  */
+    size_t          size;
+
+    /**
+     * Register the Bthl callbacks
+     */
+    bt_status_t (*init)( bthl_callbacks_t* callbacks );
+
+    /** Register HL application */
+    bt_status_t (*register_application) ( bthl_reg_param_t *p_reg_param, int *app_id);
+
+    /** Unregister HL application */
+    bt_status_t (*unregister_application) (int app_id);
+
+    /** connect channel */
+    bt_status_t (*connect_channel)(int app_id, bt_bdaddr_t *bd_addr, int mdep_cfg_index, int *channel_id);
+
+    /** destroy channel */
+    bt_status_t (*destroy_channel)(int channel_id);
+
+    /** Close the  Bthl callback **/
+    void (*cleanup)(void);
+
+} bthl_interface_t;
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BT_HL_H */
+
+
diff --git a/include/hardware/bt_pan.h b/include/hardware/bt_pan.h
new file mode 100644
index 0000000..c8b36b4
--- /dev/null
+++ b/include/hardware/bt_pan.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BT_PAN_H
+#define ANDROID_INCLUDE_BT_PAN_H
+
+__BEGIN_DECLS
+
+#define BTPAN_ROLE_NONE      0
+#define BTPAN_ROLE_PANNAP    1
+#define BTPAN_ROLE_PANU      2
+
+typedef enum {
+    BTPAN_STATE_CONNECTED       = 0,
+    BTPAN_STATE_CONNECTING      = 1,
+    BTPAN_STATE_DISCONNECTED    = 2,
+    BTPAN_STATE_DISCONNECTING   = 3
+} btpan_connection_state_t;
+
+typedef enum {
+    BTPAN_STATE_ENABLED = 0,
+    BTPAN_STATE_DISABLED = 1
+} btpan_control_state_t;
+
+/**
+* Callback for pan connection state
+*/
+typedef void (*btpan_connection_state_callback)(btpan_connection_state_t state, bt_status_t error,
+                                                const bt_bdaddr_t *bd_addr, int local_role, int remote_role);
+typedef void (*btpan_control_state_callback)(btpan_control_state_t state, bt_status_t error,
+                                            int local_role, const char* ifname);
+
+typedef struct {
+    size_t size;
+    btpan_control_state_callback control_state_cb;
+    btpan_connection_state_callback connection_state_cb;
+} btpan_callbacks_t;
+typedef struct {
+    /** set to size of this struct*/
+    size_t          size;
+    /**
+     * Initialize the pan interface and register the btpan callbacks
+     */
+    bt_status_t (*init)(const btpan_callbacks_t* callbacks);
+    /*
+     * enable the pan service by specified role. The result state of
+     * enabl will be returned by btpan_control_state_callback. when pan-nap is enabled,
+     * the state of connecting panu device will be notified by btpan_connection_state_callback
+     */
+    bt_status_t (*enable)(int local_role);
+    /*
+     * get current pan local role
+     */
+    int (*get_local_role)(void);
+    /**
+     * start bluetooth pan connection to the remote device by specified pan role. The result state will be
+     * returned by btpan_connection_state_callback
+     */
+    bt_status_t (*connect)(const bt_bdaddr_t *bd_addr, int local_role, int remote_role);
+    /**
+     * stop bluetooth pan connection. The result state will be returned by btpan_connection_state_callback
+     */
+    bt_status_t (*disconnect)(const bt_bdaddr_t *bd_addr);
+
+    /**
+     * Cleanup the pan interface
+     */
+    void (*cleanup)(void);
+
+} btpan_interface_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BT_PAN_H */
diff --git a/include/hardware/bt_sock.h b/include/hardware/bt_sock.h
new file mode 100644
index 0000000..a4aa046
--- /dev/null
+++ b/include/hardware/bt_sock.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_BT_SOCK_H
+#define ANDROID_INCLUDE_BT_SOCK_H
+
+__BEGIN_DECLS
+
+#define BTSOCK_FLAG_ENCRYPT 1
+#define BTSOCK_FLAG_AUTH (1 << 1)
+
+typedef enum {
+    BTSOCK_RFCOMM = 1,
+    BTSOCK_SCO = 2,
+    BTSOCK_L2CAP = 3
+} btsock_type_t;
+
+/** Represents the standard BT SOCKET interface. */
+typedef struct {
+    short size;
+    bt_bdaddr_t bd_addr;
+    int channel;
+    int status;
+} __attribute__((packed)) sock_connect_signal_t;
+
+typedef struct {
+
+    /** set to size of this struct*/
+    size_t          size;
+    /**
+     * listen to a rfcomm uuid or channel. It returns the socket fd from which
+     * btsock_connect_signal can be read out when a remote device connected
+     */
+    bt_status_t (*listen)(btsock_type_t type, const char* service_name, const uint8_t* service_uuid, int channel, int* sock_fd, int flags);
+    /*
+     * connect to a rfcomm uuid channel of remote device, It returns the socket fd from which
+     * the btsock_connect_signal and a new socket fd to be accepted can be read out when connected
+     */
+    bt_status_t (*connect)(const bt_bdaddr_t *bd_addr, btsock_type_t type, const uint8_t* uuid, int channel, int* sock_fd, int flags);
+
+} btsock_interface_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_BT_SOCK_H */