/* * Copyright (C) 2010 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef ANDROID_INCLUDE_HARDWARE_HWCOMPOSER_DEFS_H #define ANDROID_INCLUDE_HARDWARE_HWCOMPOSER_DEFS_H #include #include #include #include #include __BEGIN_DECLS /*****************************************************************************/ #define HWC_HEADER_VERSION 1 #define HWC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1) #define HWC_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION_2(1, 0, HWC_HEADER_VERSION) #define HWC_DEVICE_API_VERSION_1_1 HARDWARE_DEVICE_API_VERSION_2(1, 1, HWC_HEADER_VERSION) #define HWC_DEVICE_API_VERSION_1_2 HARDWARE_DEVICE_API_VERSION_2(1, 2, HWC_HEADER_VERSION) #define HWC_DEVICE_API_VERSION_1_3 HARDWARE_DEVICE_API_VERSION_2(1, 3, HWC_HEADER_VERSION) #define HWC_DEVICE_API_VERSION_1_4 HARDWARE_DEVICE_API_VERSION_2(1, 4, HWC_HEADER_VERSION) #define HWC_DEVICE_API_VERSION_1_5 HARDWARE_DEVICE_API_VERSION_2(1, 5, HWC_HEADER_VERSION) enum { /* hwc_composer_device_t::set failed in EGL */ HWC_EGL_ERROR = -1 }; /* * hwc_layer_t::hints values * Hints are set by the HAL and read by SurfaceFlinger */ enum { /* * HWC can set the HWC_HINT_TRIPLE_BUFFER hint to indicate to SurfaceFlinger * that it should triple buffer this layer. Typically HWC does this when * the layer will be unavailable for use for an extended period of time, * e.g. if the display will be fetching data directly from the layer and * the layer can not be modified until after the next set(). */ HWC_HINT_TRIPLE_BUFFER = 0x00000001, /* * HWC sets HWC_HINT_CLEAR_FB to tell SurfaceFlinger that it should clear the * framebuffer with transparent pixels where this layer would be. * SurfaceFlinger will only honor this flag when the layer has no blending * */ HWC_HINT_CLEAR_FB = 0x00000002 }; /* * hwc_layer_t::flags values * Flags are set by SurfaceFlinger and read by the HAL */ enum { /* * HWC_SKIP_LAYER is set by SurfaceFlnger to indicate that the HAL * shall not consider this layer for composition as it will be handled * by SurfaceFlinger (just as if compositionType was set to HWC_OVERLAY). */ HWC_SKIP_LAYER = 0x00000001, /* * HWC_IS_CURSOR_LAYER is set by surfaceflinger to indicate that this * layer is being used as a cursor on this particular display, and that * surfaceflinger can potentially perform asynchronous position updates for * this layer. If a call to prepare() returns HWC_CURSOR_OVERLAY for the * composition type of this layer, then the hwcomposer will allow async * position updates to this layer via setCursorPositionAsync(). */ HWC_IS_CURSOR_LAYER = 0x00000002 }; /* * hwc_layer_t::compositionType values */ enum { /* this layer is to be drawn into the framebuffer by SurfaceFlinger */ HWC_FRAMEBUFFER = 0, /* this layer will be handled in the HWC */ HWC_OVERLAY = 1, /* this is the background layer. it's used to set the background color. * there is only a single background layer */ HWC_BACKGROUND = 2, /* this layer holds the result of compositing the HWC_FRAMEBUFFER layers. * Added in HWC_DEVICE_API_VERSION_1_1. */ HWC_FRAMEBUFFER_TARGET = 3, /* this layer's contents are taken from a sideband buffer stream. * Added in HWC_DEVICE_API_VERSION_1_4. */ HWC_SIDEBAND = 4, /* this layer's composition will be handled by hwcomposer by dedicated cursor overlay hardware. hwcomposer will also all async position updates of this layer outside of the normal prepare()/set() loop. Added in HWC_DEVICE_API_VERSION_1_4. */ HWC_CURSOR_OVERLAY = 5 }; /* * hwc_layer_t::blending values */ enum { /* no blending */ HWC_BLENDING_NONE = 0x0100, /* ONE / ONE_MINUS_SRC_ALPHA */ HWC_BLENDING_PREMULT = 0x0105, /* SRC_ALPHA / ONE_MINUS_SRC_ALPHA */ HWC_BLENDING_COVERAGE = 0x0405 }; /* * hwc_layer_t::transform values */ enum { /* flip source image horizontally */ HWC_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H, /* flip source image vertically */ HWC_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V, /* rotate source image 90 degrees clock-wise */ HWC_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90, /* rotate source image 180 degrees */ HWC_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180, /* rotate source image 270 degrees clock-wise */ HWC_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270, }; /* attributes queriable with query() */ enum { /* * Must return 1 if the background layer is supported, 0 otherwise. */ HWC_BACKGROUND_LAYER_SUPPORTED = 0, /* * Returns the vsync period in nanoseconds. * * This query is not used for HWC_DEVICE_API_VERSION_1_1 and later. * Instead, the per-display attribute HWC_DISPLAY_VSYNC_PERIOD is used. */ HWC_VSYNC_PERIOD = 1, /* * Availability: HWC_DEVICE_API_VERSION_1_1 * Returns a mask of supported display types. */ HWC_DISPLAY_TYPES_SUPPORTED = 2, }; /* display attributes returned by getDisplayAttributes() */ enum { /* Indicates the end of an attribute list */ HWC_DISPLAY_NO_ATTRIBUTE = 0, /* The vsync period in nanoseconds */ HWC_DISPLAY_VSYNC_PERIOD = 1, /* The number of pixels in the horizontal and vertical directions. */ HWC_DISPLAY_WIDTH = 2, HWC_DISPLAY_HEIGHT = 3, /* The number of pixels per thousand inches of this configuration. * * Scaling DPI by 1000 allows it to be stored in an int without losing * too much precision. * * If the DPI for a configuration is unavailable or the HWC implementation * considers it unreliable, it should set these attributes to zero. */ HWC_DISPLAY_DPI_X = 4, HWC_DISPLAY_DPI_Y = 5, /* Indicates which of the vendor-defined color transforms is provided by * this configuration. */ HWC_DISPLAY_COLOR_TRANSFORM = 6, }; /* Allowed events for hwc_methods::eventControl() */ enum { HWC_EVENT_VSYNC = 0 }; /* Display types and associated mask bits. */ enum { HWC_DISPLAY_PRIMARY = 0, HWC_DISPLAY_EXTERNAL = 1, // HDMI, DP, etc. #ifdef QTI_BSP HWC_DISPLAY_TERTIARY = 2, HWC_DISPLAY_VIRTUAL = 3, HWC_NUM_PHYSICAL_DISPLAY_TYPES = 3, HWC_NUM_DISPLAY_TYPES = 4, #else HWC_DISPLAY_VIRTUAL = 2, HWC_NUM_PHYSICAL_DISPLAY_TYPES = 2, HWC_NUM_DISPLAY_TYPES = 3, #endif }; enum { HWC_DISPLAY_PRIMARY_BIT = 1 << HWC_DISPLAY_PRIMARY, HWC_DISPLAY_EXTERNAL_BIT = 1 << HWC_DISPLAY_EXTERNAL, #ifdef QTI_BSP HWC_DISPLAY_TERTIARY_BIT = 1 << HWC_DISPLAY_TERTIARY, #endif HWC_DISPLAY_VIRTUAL_BIT = 1 << HWC_DISPLAY_VIRTUAL, }; /* Display power modes */ enum { /* The display is turned off (blanked). */ HWC_POWER_MODE_OFF = 0, /* The display is turned on and configured in a low power state * that is suitable for presenting ambient information to the user, * possibly with lower fidelity than normal but greater efficiency. */ HWC_POWER_MODE_DOZE = 1, /* The display is turned on normally. */ HWC_POWER_MODE_NORMAL = 2, /* The display is configured as in HWC_POWER_MODE_DOZE but may * stop applying frame buffer updates from the graphics subsystem. * This power mode is effectively a hint from the doze dream to * tell the hardware that it is done drawing to the display for the * time being and that the display should remain on in a low power * state and continue showing its current contents indefinitely * until the mode changes. * * This mode may also be used as a signal to enable hardware-based doze * functionality. In this case, the doze dream is effectively * indicating that the hardware is free to take over the display * and manage it autonomously to implement low power always-on display * functionality. */ HWC_POWER_MODE_DOZE_SUSPEND = 3, }; /*****************************************************************************/ __END_DECLS #endif /* ANDROID_INCLUDE_HARDWARE_HWCOMPOSER_DEFS_H */