From 03c6b6f113931e168d3196c216084be4606216cb Mon Sep 17 00:00:00 2001 From: xinhe Date: Thu, 12 Feb 2015 10:42:24 -0800 Subject: update rtt.h for 11mc double side RTT Bug:19364957 Change-Id: I4fe1fee30c353963b9c6c4958a1ca23f1632253f --- include/hardware_legacy/rtt.h | 64 +++++++++++++++++++++++++++++++++---------- 1 file changed, 50 insertions(+), 14 deletions(-) diff --git a/include/hardware_legacy/rtt.h b/include/hardware_legacy/rtt.h index 343f554..1afcadd 100644 --- a/include/hardware_legacy/rtt.h +++ b/include/hardware_legacy/rtt.h @@ -1,5 +1,6 @@ #include "wifi_hal.h" +#include "gscan.h" #ifndef __WIFI_HAL_RTT_H__ #define __WIFI_HAL_RTT_H__ @@ -16,6 +17,7 @@ typedef enum { RTT_STATUS_FAIL_TM_TIMEOUT, RTT_STATUS_FAIL_AP_ON_DIFF_CHANNEL, RTT_STATUS_FAIL_NO_CAPABILITY, + RTT_STATUS_FAIL_BUSY_TRY_LATER, //2 side RTT if other side temporarily busy RTT_STATUS_ABORTED } wifi_rtt_status; @@ -31,34 +33,54 @@ typedef enum { /* RTT configuration */ typedef struct { mac_addr addr; // peer device mac address - wifi_rtt_type type; // optional - rtt type hint. RTT_TYPE_INVALID implies best effort + wifi_rtt_type type; // optional - rtt type hint. + // RTT_TYPE_AUTO implies best effort wifi_peer_type peer; // optional - peer device hint (STA, P2P, AP) wifi_channel_info channel; // Required for STA-AP mode, optional for P2P, NBD etc. - byte continuous; // 0 = single shot or 1 = continuous ranging - unsigned interval; // interval of RTT measurement (unit ms) when continuous = true - unsigned num_measurements; // total number of RTT measurements when continuous = true - unsigned num_samples_per_measurement; // num of packets in each RTT measurement - unsigned num_retries_per_measurement; // num of retries if sampling fails + byte multi_burst; // 0 = single burst or 1 = multi burst ranging + unsigned interval; // interval between RTT burst (unit ms). + // Only valid when multi_burst = 1 + unsigned num_burst; // total number of RTT bursts when multi_burst = 1 + unsigned num_frames_per_burst; // num of frames in each RTT burst + // for single side, measurement result num = frame number + // for 2 side RTT, measurement result num = frame number - 1 + unsigned num_retries_per_measurement_frame; // retry time for RTT MEASUREMENT frame + + //following fields are only valid for 2 side RTT + unsigned num_retries_per_ftmr; + byte LCI_request; // request LCI or not + byte LCR_request; // request LCR or not + unsigned burst_timeout; // unit of 250 us + byte preamble; // 0- Legacy,1- HT, 2-VHT + byte bw; //5, 10, 20, 40, 80,160 } wifi_rtt_config; -/* RTT results */ +/* RTT results*/ typedef struct { mac_addr addr; // device mac address - unsigned measurement_num; // measurement number in case of continuous ranging + unsigned burst_num; // # of burst inside a multi-burst request + unsigned measurement_number; // total RTT measurement Frames + unsigned success_number; // total successful RTT measurement Frames + byte number_per_burst_peer; //Max number of FTM numbers per burst the other side support, + //11mc only wifi_rtt_status status; // ranging status + byte retry_after_duration; // in s , 11mc only, only for RTT_STATUS_FAIL_BUSY_TRY_LATER, 1-31s wifi_rtt_type type; // RTT type - wifi_peer_type peer; // peer device type (P2P, AP) - wifi_channel_info channel; // channel information - wifi_rssi rssi; // rssi in 0.5 dB steps e.g. 143 implies -71.5 dB + wifi_rssi rssi; // average rssi in 0.5 dB steps e.g. 143 implies -71.5 dB wifi_rssi rssi_spread; // rssi spread in 0.5 dB steps e.g. 5 implies 2.5 dB spread (optional) wifi_rate tx_rate; // TX rate - wifi_timespan rtt; // round trip time in nanoseconds - wifi_timespan rtt_sd; // rtt standard deviation in nanoseconds + wifi_rate rx_rate; // Rx rate + wifi_timespan rtt; // round trip time in 0.1 nanoseconds + wifi_timespan rtt_sd; // rtt standard deviation in 0.1 nanoseconds wifi_timespan rtt_spread; // difference between max and min rtt times recorded int distance; // distance in cm (optional) int distance_sd; // standard deviation in cm (optional) int distance_spread; // difference between max and min distance recorded (optional) wifi_timestamp ts; // time of the measurement (in microseconds since boot) + int burst_duration; // in ms, How long the FW time is to finish one burst measurement + wifi_information_element LCI; // for 11mc only, optional + wifi_information_element LCR; // for 11mc only, optional + } wifi_rtt_result; /* RTT result callback */ @@ -94,11 +116,25 @@ wifi_error wifi_rtt_channel_map_set(wifi_request_id id, DW interval and will also stop broadcasting NBD ranging attribute in SDF */ wifi_error wifi_rtt_channel_map_clear(wifi_request_id id, wifi_interface_handle iface); +#define PREAMBLE_LEGACY 0x1 +#define PREAMBLE_HT 0x2 +#define PREAMBLE_VHT 0x4 + +#define BW_5_SUPPORT 0x1 +#define BW_10_SUPPORT 0x2 +#define BW_20_SUPPORT 0x4 +#define BW_40_SUPPORT 0x8 +#define BW_80_SUPPORT 0x10 +#define BW_160_SUPPORT 0x20 + /* RTT Capabilities */ typedef struct { byte rtt_one_sided_supported; // if 1-sided rtt data collection is supported - byte rtt_11v_supported; // if 11v rtt data collection is supported byte rtt_ftm_supported; // if ftm rtt data collection is supported + byte lci_support; + byte lcr_support; + byte preamble_support; //bit mask indicate what preamble is supported + byte bw_support; //bit mask indicate what BW is supported } wifi_rtt_capabilities; /* RTT capabilities of the device */ -- cgit v1.1