diff options
90 files changed, 949 insertions, 509 deletions
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 9f09557..a12ea3b 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -18,8 +18,12 @@ Usage Anonymous finger details are sent sequentially as separate packets of ABS events. Only the ABS_MT events are recognized as part of a finger packet. The end of a packet is marked by calling the input_mt_sync() -function, which generates a SYN_MT_REPORT event. The end of multi-touch -transfer is marked by calling the usual input_sync() function. +function, which generates a SYN_MT_REPORT event. This instructs the +receiver to accept the data for the current finger and prepare to receive +another. The end of a multi-touch transfer is marked by calling the usual +input_sync() function. This instructs the receiver to act upon events +accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new +set of events/packets. A set of ABS_MT events with the desired properties is defined. The events are divided into categories, to allow for partial implementation. The @@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with -ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with -more granular information may specify general shapes as blobs, i.e., as a -sequence of rectangular shapes grouped together by an -ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify -whether the touching tool is a finger or a pen or something else. +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The +ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +finger or a pen or something else. Devices with more granular information +may specify general shapes as blobs, i.e., as a sequence of rectangular +shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices +that currently support it, the ABS_MT_TRACKING_ID event may be used to +report finger tracking from hardware [5]. + +Here is what a minimal event sequence for a two-finger touch would look +like: + + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + SYN_REPORT Event Semantics @@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR The length of the major axis of the contact. The length should be given in surface units. If the surface has an X times Y resolution, the largest -possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4]. ABS_MT_TOUCH_MINOR The length, in surface units, of the minor axis of the contact. If the -contact is circular, this event can be omitted. +contact is circular, this event can be omitted [4]. ABS_MT_WIDTH_MAJOR The length, in surface units, of the major axis of the approaching tool. This should be understood as the size of the tool itself. The orientation of the contact and the approaching tool are assumed to be the -same. +same [4]. ABS_MT_WIDTH_MINOR The length, in surface units, of the minor axis of the approaching -tool. Omit if circular. +tool. Omit if circular [4]. The above four values can be used to derive additional information about the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates @@ -70,14 +89,17 @@ different characteristic widths [1]. ABS_MT_ORIENTATION -The orientation of the ellipse. The value should describe half a revolution -clockwise around the touch center. The scale of the value is arbitrary, but -zero should be returned for an ellipse aligned along the Y axis of the -surface. As an example, an index finger placed straight onto the axis could -return zero orientation, something negative when twisted to the left, and -something positive when twisted to the right. This value can be omitted if -the touching object is circular, or if the information is not available in -the kernel driver. +The orientation of the ellipse. The value should describe a signed quarter +of a revolution clockwise around the touch center. The signed value range +is arbitrary, but zero should be returned for a finger aligned along the Y +axis of the surface, a negative value when finger is turned to the left, and +a positive value when finger turned to the right. When completely aligned with +the X axis, the range max should be returned. Orientation can be omitted +if the touching object is circular, or if the information is not available +in the kernel driver. Partial orientation support is possible if the device +can distinguish between the two axis, but not (uniquely) any values in +between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1] +[4]. ABS_MT_POSITION_X @@ -98,8 +120,35 @@ ABS_MT_BLOB_ID The BLOB_ID groups several packets together into one arbitrarily shaped contact. This is a low-level anonymous grouping, and should not be confused -with the high-level contactID, explained below. Most kernel drivers will -not have this capability, and can safely omit the event. +with the high-level trackingID [5]. Most kernel drivers will not have blob +capability, and can safely omit the event. + +ABS_MT_TRACKING_ID + +The TRACKING_ID identifies an initiated contact throughout its life cycle +[5]. There are currently only a few devices that support it, so this event +should normally be omitted. + + +Event Computation +----------------- + +The flora of different hardware unavoidably leads to some devices fitting +better to the MT protocol than others. To simplify and unify the mapping, +this section gives recipes for how to compute certain events. + +For devices reporting contacts as rectangular shapes, signed orientation +cannot be obtained. Assuming X and Y are the lengths of the sides of the +touching rectangle, here is a simple formula that retains the most +information possible: + + ABS_MT_TOUCH_MAJOR := max(X, Y) + ABS_MT_TOUCH_MINOR := min(X, Y) + ABS_MT_ORIENTATION := bool(X > Y) + +The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that +the device can distinguish between a finger along the Y axis (0) and a +finger along the X axis (1). Finger Tracking @@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of anonymous contacts currently on the surface. The order in which the packets appear in the event stream is not important. -The process of finger tracking, i.e., to assign a unique contactID to each +The process of finger tracking, i.e., to assign a unique trackingID to each initiated contact on the surface, is left to user space; preferably the -multi-touch X driver [3]. In that driver, the contactID stays the same and +multi-touch X driver [3]. In that driver, the trackingID stays the same and unique until the contact vanishes (when the finger leaves the surface). The problem of assigning a set of anonymous fingers to a set of identified fingers is a euclidian bipartite matching problem at each event update, and relies on a sufficiently rapid update rate. +There are a few devices that support trackingID in hardware. User space can +make use of these native identifiers to reduce bandwidth and cpu usage. + + Notes ----- @@ -136,5 +189,7 @@ could be used to derive tilt. time of writing (April 2009), the MT protocol is not yet merged, and the prototype implements finger matching, basic mouse support and two-finger scrolling. The project aims at improving the quality of current multi-touch -functionality available in the synaptics X driver, and in addition +functionality available in the Synaptics X driver, and in addition implement more advanced gestures. +[4] See the section on event computation. +[5] See the section on finger tracking. diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index bba2dbb..cfac20c 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -104,6 +104,11 @@ card*/pcm*/xrun_debug When this value is greater than 1, the driver will show the stack trace additionally. This may help the debugging. + Since 2.6.30, this option also enables the hwptr check using + jiffies. This detects spontaneous invalid pointer callback + values, but can be lead to too much corrections for a (mostly + buggy) hardware that doesn't give smooth pointer updates. + card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/MAINTAINERS b/MAINTAINERS index 77cbfb1..41c6605 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -434,7 +434,7 @@ F: arch/alpha/ AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER P: Thomas Dahlmann -M: thomas.dahlmann@amd.com +M: dahlmann.thomas@arcor.de L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/usb/gadget/amd5536udc.* @@ -1132,17 +1132,17 @@ F: fs/bfs/ F: include/linux/bfs_fs.h BLACKFIN ARCHITECTURE -P: Bryan Wu -M: cooloney@kernel.org +P: Mike Frysinger +M: vapier@gentoo.org L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: arch/blackfin/ BLACKFIN EMAC DRIVER -P: Bryan Wu -M: cooloney@kernel.org -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +P: Michael Hennerich +M: michael.hennerich@analog.com +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/net/bfin_mac.* @@ -1150,7 +1150,7 @@ F: drivers/net/bfin_mac.* BLACKFIN RTC DRIVER P: Mike Frysinger M: vapier.adi@gmail.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/rtc/rtc-bfin.c @@ -1158,7 +1158,7 @@ F: drivers/rtc/rtc-bfin.c BLACKFIN SERIAL DRIVER P: Sonic Zhang M: sonic.zhang@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/serial/bfin_5xx.c @@ -1166,7 +1166,7 @@ F: drivers/serial/bfin_5xx.c BLACKFIN WATCHDOG DRIVER P: Mike Frysinger M: vapier.adi@gmail.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/watchdog/bfin_wdt.c @@ -1174,7 +1174,7 @@ F: drivers/watchdog/bfin_wdt.c BLACKFIN I2C TWI DRIVER P: Sonic Zhang M: sonic.zhang@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org/ S: Supported F: drivers/i2c/busses/i2c-bfin-twi.c @@ -1971,8 +1971,8 @@ F: include/linux/edac.h EDAC-E752X P: Mark Gross -P: Doug Thompson M: mark.gross@intel.com +P: Doug Thompson M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 1d77e51..59426a4 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -5,9 +5,6 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore deleted file mode 100644 index 7858564..0000000 --- a/arch/blackfin/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -+mach diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h index e70074e..733a178 100644 --- a/arch/blackfin/include/asm/flat.h +++ b/arch/blackfin/include/asm/flat.h @@ -10,7 +10,6 @@ #include <asm/unaligned.h> -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 1e57b63..cf5066d 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_dup3 363 #define __NR_pipe2 364 #define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 -#define __NR_syscall 366 +#define __NR_syscall 368 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/kernel/.gitignore b/arch/blackfin/kernel/.gitignore new file mode 100644 index 0000000..c5f676c --- /dev/null +++ b/arch/blackfin/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c index 2aaae78..46518b1 100644 --- a/arch/blackfin/lib/strncmp.c +++ b/arch/blackfin/lib/strncmp.c @@ -8,9 +8,8 @@ #define strncmp __inline_strncmp #include <asm/string.h> -#undef strncmp - #include <linux/module.h> +#undef strncmp int strncmp(const char *cs, const char *ct, size_t count) { diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 21e65a3..a063a43 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table) .long _sys_dup3 .long _sys_pipe2 .long _sys_inotify_init1 /* 365 */ + .long _sys_preadv + .long _sys_pwritev .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h index 2a87350..bd12b31 100644 --- a/arch/h8300/include/asm/flat.h +++ b/arch/h8300/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __H8300_FLAT_H__ #define __H8300_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) 1 #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h index d851cf0..5d711c4 100644 --- a/arch/m32r/include/asm/flat.h +++ b/arch/m32r/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_M32R_FLAT_H #define __ASM_M32R_FLAT_H -#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_set_persistent(relval, p) 0 diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h index 814b517..a0e2907 100644 --- a/arch/m68k/include/asm/flat.h +++ b/arch/m68k/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __M68KNOMMU_FLAT_H__ #define __M68KNOMMU_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a0d1146..cdc9a6f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -868,6 +868,18 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" +config CONSISTENT_SIZE_BOOL + bool "Set custom consistent memory pool size" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the size of the + consistent memory pool. This pool of virtual memory + is used to make consistent memory allocations. + +config CONSISTENT_SIZE + hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL + default "0x00200000" if NOT_COHERENT_CACHE + config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index c69f2b5..cb448d68 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -26,7 +26,9 @@ * allocate the space "normally" and use the cache management functions * to ensure it is consistent. */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); +struct device; +extern void *__dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp); extern void __dma_free_coherent(size_t size, void *vaddr); extern void __dma_sync(void *vaddr, size_t size, int direction); extern void __dma_sync_page(struct page *page, unsigned long offset, @@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, * Cache coherent cores. */ -#define __dma_alloc_coherent(gfp, size, handle) NULL +#define __dma_alloc_coherent(dev, gfp, size, handle) NULL #define __dma_free_coherent(size, addr) ((void)0) #define __dma_sync(addr, size, rw) ((void)0) #define __dma_sync_page(pg, off, sz, rw) ((void)0) diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h index d60fd18..f1f4e23 100644 --- a/arch/powerpc/include/asm/fixmap.h +++ b/arch/powerpc/include/asm/fixmap.h @@ -14,8 +14,6 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -extern unsigned long FIXADDR_TOP; - #ifndef __ASSEMBLY__ #include <linux/kernel.h> #include <asm/page.h> @@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP; #include <asm/kmap_types.h> #endif +#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) + /* * Here we define all the compile-time 'special' virtual * addresses. The point is to have a constant address at diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index ba45c99..c9ff9d7 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -10,7 +10,7 @@ extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; +extern unsigned long ioremap_bot; #ifdef CONFIG_44x extern int icache_44x_need_flush; @@ -56,8 +56,30 @@ extern int icache_44x_need_flush; printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) /* + * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary + * value (for now) on others, from where we can start layout kernel + * virtual space that goes below PKMAP and FIXMAP + */ +#ifdef CONFIG_HIGHMEM +#define KVIRT_TOP PKMAP_BASE +#else +#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */ +#endif + +/* + * ioremap_bot starts at that address. Early ioremaps move down from there, + * until mem_init() at which point this becomes the top of the vmalloc + * and ioremap space + */ +#ifdef CONFIG_NOT_COHERENT_CACHE +#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK) +#else +#define IOREMAP_TOP KVIRT_TOP +#endif + +/* * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the + * current 16MB value just means that there will be a 64MB "hole" after the * physical memory until the kernel virtual memory starts. That means that * any out-of-bounds memory accesses will hopefully be caught. * The vmalloc() routines leaves a hole of 4kB between each vmalloced diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 53c7788..6b02793 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, { void *ret; #ifdef CONFIG_NOT_COHERENT_CACHE - ret = __dma_alloc_coherent(size, dma_handle, flag); + ret = __dma_alloc_coherent(dev, size, dma_handle, flag); if (ret == NULL) return NULL; *dma_handle += get_dma_direct_offset(dev); diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 8db3527..29b742b 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o obj-$(CONFIG_XMON) += sstep.o obj-$(CONFIG_KPROBES) += sstep.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c deleted file mode 100644 index 005a28d..0000000 --- a/arch/powerpc/lib/dma-noncoherent.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * PowerPC version derived from arch/arm/mm/consistent.c - * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) - * - * Copyright (C) 2000 Russell King - * - * Consistent memory allocators. Used for DMA devices that want to - * share uncached memory with the processor core. The function return - * is the virtual address and 'dma_handle' is the physical address. - * Mostly stolen from the ARM port, with some changes for PowerPC. - * -- Dan - * - * Reorganized to get rid of the arch-specific consistent_* functions - * and provide non-coherent implementations for the DMA API. -Matt - * - * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() - * implementation. This is pulled straight from ARM and barely - * modified. -Matt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/highmem.h> -#include <linux/dma-mapping.h> -#include <linux/vmalloc.h> - -#include <asm/tlbflush.h> - -/* - * Allocate DMA-coherent memory space and return both the kernel remapped - * virtual and bus address for that space. - */ -void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) -{ - struct page *page; - unsigned long order; - int i; - unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT; - unsigned int array_size = nr_pages * sizeof(struct page *); - struct page **pages; - struct page *end; - u64 mask = 0x00ffffff, limit; /* ISA default */ - struct vm_struct *area; - - BUG_ON(!mem_init_done); - size = PAGE_ALIGN(size); - limit = (mask + 1) & ~mask; - if (limit && size >= limit) { - printk(KERN_WARNING "coherent allocation too big (requested " - "%#x mask %#Lx)\n", size, mask); - return NULL; - } - - order = get_order(size); - - if (mask != 0xffffffff) - gfp |= GFP_DMA; - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - end = page + (1 << order); - - /* - * Invalidate any data that might be lurking in the - * kernel direct-mapped region for device DMA. - */ - { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - flush_dcache_range(kaddr, kaddr + size); - } - - split_page(page, order); - - /* - * Set the "dma handle" - */ - *handle = page_to_phys(page); - - area = get_vm_area_caller(size, VM_IOREMAP, - __builtin_return_address(1)); - if (!area) - goto out_free_pages; - - if (array_size > PAGE_SIZE) { - pages = vmalloc(array_size); - area->flags |= VM_VPAGES; - } else { - pages = kmalloc(array_size, GFP_KERNEL); - } - if (!pages) - goto out_free_area; - - area->pages = pages; - area->nr_pages = nr_pages; - - for (i = 0; i < nr_pages; i++) - pages[i] = page + i; - - if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages)) - goto out_unmap; - - /* - * Free the otherwise unused pages. - */ - page += nr_pages; - while (page < end) { - __free_page(page); - page++; - } - - return area->addr; -out_unmap: - vunmap(area->addr); - if (array_size > PAGE_SIZE) - vfree(pages); - else - kfree(pages); - goto out_free_pages; -out_free_area: - free_vm_area(area); -out_free_pages: - if (page) - __free_pages(page, order); -no_page: - return NULL; -} -EXPORT_SYMBOL(__dma_alloc_coherent); - -/* - * free a page as defined by the above mapping. - */ -void __dma_free_coherent(size_t size, void *vaddr) -{ - vfree(vaddr); - -} -EXPORT_SYMBOL(__dma_free_coherent); - -/* - * make an area consistent. - */ -void __dma_sync(void *vaddr, size_t size, int direction) -{ - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; - - switch (direction) { - case DMA_NONE: - BUG(); - case DMA_FROM_DEVICE: - /* - * invalidate only when cache-line aligned otherwise there is - * the potential for discarding uncommitted data from the cache - */ - if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) - flush_dcache_range(start, end); - else - invalidate_dcache_range(start, end); - break; - case DMA_TO_DEVICE: /* writeback only */ - clean_dcache_range(start, end); - break; - case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - flush_dcache_range(start, end); - break; - } -} -EXPORT_SYMBOL(__dma_sync); - -#ifdef CONFIG_HIGHMEM -/* - * __dma_sync_page() implementation for systems using highmem. - * In this case, each page of a buffer must be kmapped/kunmapped - * in order to have a virtual address for __dma_sync(). This must - * not sleep so kmap_atomic()/kunmap_atomic() are used. - * - * Note: yes, it is possible and correct to have a buffer extend - * beyond the first page. - */ -static inline void __dma_sync_page_highmem(struct page *page, - unsigned long offset, size_t size, int direction) -{ - size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); - size_t cur_size = seg_size; - unsigned long flags, start, seg_offset = offset; - int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; - int seg_nr = 0; - - local_irq_save(flags); - - do { - start = (unsigned long)kmap_atomic(page + seg_nr, - KM_PPC_SYNC_PAGE) + seg_offset; - - /* Sync this buffer segment */ - __dma_sync((void *)start, seg_size, direction); - kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); - seg_nr++; - - /* Calculate next buffer segment size */ - seg_size = min((size_t)PAGE_SIZE, size - cur_size); - - /* Add the segment size to our running total */ - cur_size += seg_size; - seg_offset = 0; - } while (seg_nr < nr_segs); - - local_irq_restore(flags); -} -#endif /* CONFIG_HIGHMEM */ - -/* - * __dma_sync_page makes memory consistent. identical to __dma_sync, but - * takes a struct page instead of a virtual address - */ -void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction) -{ -#ifdef CONFIG_HIGHMEM - __dma_sync_page_highmem(page, offset, size, direction); -#else - unsigned long start = (unsigned long)page_address(page) + offset; - __dma_sync((void *)start, size, direction); -#endif -} -EXPORT_SYMBOL(__dma_sync_page); diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 17290bc..b746f4c 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o +obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c new file mode 100644 index 0000000..36692f5 --- /dev/null +++ b/arch/powerpc/mm/dma-noncoherent.c @@ -0,0 +1,400 @@ +/* + * PowerPC version derived from arch/arm/mm/consistent.c + * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) + * + * Copyright (C) 2000 Russell King + * + * Consistent memory allocators. Used for DMA devices that want to + * share uncached memory with the processor core. The function return + * is the virtual address and 'dma_handle' is the physical address. + * Mostly stolen from the ARM port, with some changes for PowerPC. + * -- Dan + * + * Reorganized to get rid of the arch-specific consistent_* functions + * and provide non-coherent implementations for the DMA API. -Matt + * + * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() + * implementation. This is pulled straight from ARM and barely + * modified. -Matt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/highmem.h> +#include <linux/dma-mapping.h> + +#include <asm/tlbflush.h> + +#include "mmu_decl.h" + +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (IOREMAP_TOP) +#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct ppc_vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct ppc_vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct ppc_vm_region * +ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct ppc_vm_region *c, *new; + + new = kmalloc(sizeof(struct ppc_vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) +{ + struct ppc_vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + +/* + * Allocate DMA-coherent memory space and return both the kernel remapped + * virtual and bus address for that space. + */ +void * +__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) +{ + struct page *page; + struct ppc_vm_region *c; + unsigned long order; + u64 mask = ISA_DMA_THRESHOLD, limit; + + if (dev) { + mask = dev->coherent_dma_mask; + + /* + * Sanity check the DMA mask - it must be non-zero, and + * must be able to be satisfied by a DMA allocation. + */ + if (mask == 0) { + dev_warn(dev, "coherent DMA mask is unset\n"); + goto no_page; + } + + if ((~mask) & ISA_DMA_THRESHOLD) { + dev_warn(dev, "coherent DMA mask %#llx is smaller " + "than system GFP_DMA mask %#llx\n", + mask, (unsigned long long)ISA_DMA_THRESHOLD); + goto no_page; + } + } + + + size = PAGE_ALIGN(size); + limit = (mask + 1) & ~mask; + if ((limit && size >= limit) || + size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); + return NULL; + } + + order = get_order(size); + + /* Might be useful if we ever have a real legacy DMA zone... */ + if (mask != 0xffffffff) + gfp |= GFP_DMA; + + page = alloc_pages(gfp, order); + if (!page) + goto no_page; + + /* + * Invalidate any data that might be lurking in the + * kernel direct-mapped region for device DMA. + */ + { + unsigned long kaddr = (unsigned long)page_address(page); + memset(page_address(page), 0, size); + flush_dcache_range(kaddr, kaddr + size); + } + + /* + * Allocate a virtual address in the consistent mapping region. + */ + c = ppc_vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + struct page *end = page + (1 << order); + + split_page(page, order); + + /* + * Set the "dma handle" + */ + *handle = page_to_phys(page); + + do { + SetPageReserved(page); + map_page(vaddr, page_to_phys(page), + pgprot_noncached(PAGE_KERNEL)); + page++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } + + return (void *)c->vm_start; + } + + if (page) + __free_pages(page, order); + no_page: + return NULL; +} +EXPORT_SYMBOL(__dma_alloc_coherent); + +/* + * free a page as defined by the above mapping. + */ +void __dma_free_coherent(size_t size, void *vaddr) +{ + struct ppc_vm_region *c; + unsigned long flags, addr; + + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + addr = c->vm_start; + do { + pte_t *ptep; + unsigned long pfn; + + ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr), + addr), + addr), + addr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, addr, ptep); + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + + ClearPageReserved(page); + __free_page(page); + } + } + addr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); +} +EXPORT_SYMBOL(__dma_free_coherent); + +/* + * make an area consistent. + */ +void __dma_sync(void *vaddr, size_t size, int direction) +{ + unsigned long start = (unsigned long)vaddr; + unsigned long end = start + size; + + switch (direction) { + case DMA_NONE: + BUG(); + case DMA_FROM_DEVICE: + /* + * invalidate only when cache-line aligned otherwise there is + * the potential for discarding uncommitted data from the cache + */ + if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) + flush_dcache_range(start, end); + else + invalidate_dcache_range(start, end); + break; + case DMA_TO_DEVICE: /* writeback only */ + clean_dcache_range(start, end); + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + flush_dcache_range(start, end); + break; + } +} +EXPORT_SYMBOL(__dma_sync); + +#ifdef CONFIG_HIGHMEM +/* + * __dma_sync_page() implementation for systems using highmem. + * In this case, each page of a buffer must be kmapped/kunmapped + * in order to have a virtual address for __dma_sync(). This must + * not sleep so kmap_atomic()/kunmap_atomic() are used. + * + * Note: yes, it is possible and correct to have a buffer extend + * beyond the first page. + */ +static inline void __dma_sync_page_highmem(struct page *page, + unsigned long offset, size_t size, int direction) +{ + size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); + size_t cur_size = seg_size; + unsigned long flags, start, seg_offset = offset; + int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; + int seg_nr = 0; + + local_irq_save(flags); + + do { + start = (unsigned long)kmap_atomic(page + seg_nr, + KM_PPC_SYNC_PAGE) + seg_offset; + + /* Sync this buffer segment */ + __dma_sync((void *)start, seg_size, direction); + kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); + seg_nr++; + + /* Calculate next buffer segment size */ + seg_size = min((size_t)PAGE_SIZE, size - cur_size); + + /* Add the segment size to our running total */ + cur_size += seg_size; + seg_offset = 0; + } while (seg_nr < nr_segs); + + local_irq_restore(flags); +} +#endif /* CONFIG_HIGHMEM */ + +/* + * __dma_sync_page makes memory consistent. identical to __dma_sync, but + * takes a struct page instead of a virtual address + */ +void __dma_sync_page(struct page *page, unsigned long offset, + size_t size, int direction) +{ +#ifdef CONFIG_HIGHMEM + __dma_sync_page_highmem(page, offset, size, direction); +#else + unsigned long start = (unsigned long)page_address(page) + offset; + __dma_sync((void *)start, size, direction); +#endif +} +EXPORT_SYMBOL(__dma_sync_page); diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 666a5e8..3de6a0d9 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -168,12 +168,8 @@ void __init MMU_init(void) ppc_md.progress("MMU:mapin", 0x301); mapin_ram(); -#ifdef CONFIG_HIGHMEM - ioremap_base = PKMAP_BASE; -#else - ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM */ - ioremap_bot = ioremap_base; + /* Initialize early top-down ioremap allocator */ + ioremap_bot = IOREMAP_TOP; /* Map in I/O resources */ if (ppc_md.progress) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d0602a7..579382c 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -380,6 +380,23 @@ void __init mem_init(void) bsssize >> 10, initsize >> 10); +#ifdef CONFIG_PPC32 + pr_info("Kernel virtual memory layout:\n"); + pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP); +#ifdef CONFIG_HIGHMEM + pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", + PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); +#endif /* CONFIG_HIGHMEM */ +#ifdef CONFIG_NOT_COHERENT_CACHE + pr_info(" * 0x%08lx..0x%08lx : consistent mem\n", + IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE); +#endif /* CONFIG_NOT_COHERENT_CACHE */ + pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", + ioremap_bot, IOREMAP_TOP); + pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", + VMALLOC_START, VMALLOC_END); +#endif /* CONFIG_PPC32 */ + mem_init_done = 1; } diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 430d090..5422169 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable) #endif /* CONFIG_DEBUG_PAGEALLOC */ static int fixmaps; -unsigned long FIXADDR_TOP = (-PAGE_SIZE); -EXPORT_SYMBOL(FIXADDR_TOP); void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h index d3b2b4f..5d84df5 100644 --- a/arch/sh/include/asm/flat.h +++ b/arch/sh/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_SH_FLAT_H #define __ASM_SH_FLAT_H -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 208ecf6..54b6de2 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,8 +693,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO "Capping off P-state tranision" - " latency at 20 uS\n"); + printk_once(KERN_INFO + "P-state transition latency capped at 20 uS\n"); } /* table init */ diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 8f307d9..f46c340 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma, unsigned long sbase = saddr & PUD_MASK; unsigned long s_end = sbase + PUD_SIZE; + /* Allow segments to share if only one is marked locked */ + unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED; + unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED; + /* * match the virtual addresses, permission and the alignment of the * page table page. */ if (pmd_index(addr) != pmd_index(saddr) || - vma->vm_flags != svma->vm_flags || + vm_flags != svm_flags || sbase < svma->vm_start || svma->vm_end < s_end) return 0; diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 95650f8..bc46de3 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -116,9 +116,6 @@ int acpi_pci_bind(struct acpi_device *device) struct acpi_pci_data *pdata; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_handle handle; - struct pci_dev *dev; - struct pci_bus *bus; - if (!device || !device->parent) return -EINVAL; @@ -176,20 +173,9 @@ int acpi_pci_bind(struct acpi_device *device) * Locate matching device in PCI namespace. If it doesn't exist * this typically means that the device isn't currently inserted * (e.g. docking station, port replicator, etc.). - * We cannot simply search the global pci device list, since - * PCI devices are added to the global pci list when the root - * bridge start ops are run, which may not have happened yet. */ - bus = pci_find_bus(data->id.segment, data->id.bus); - if (bus) { - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->devfn == PCI_DEVFN(data->id.device, - data->id.function)) { - data->dev = dev; - break; - } - } - } + data->dev = pci_get_slot(pdata->bus, + PCI_DEVFN(data->id.device, data->id.function)); if (!data->dev) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %04x:%02x:%02x.%d not present in PCI namespace\n", @@ -259,9 +245,10 @@ int acpi_pci_bind(struct acpi_device *device) end: kfree(buffer.pointer); - if (result) + if (result) { + pci_dev_put(data->dev); kfree(data); - + } return result; } @@ -303,6 +290,7 @@ static int acpi_pci_unbind(struct acpi_device *device) if (data->dev->subordinate) { acpi_pci_irq_del_prt(data->id.segment, data->bus->number); } + pci_dev_put(data->dev); kfree(data); end: diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index cafb410..60e543d 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -309,9 +309,15 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr) (u32) px->bus_master_latency, (u32) px->control, (u32) px->status)); - if (!px->core_frequency) { - printk(KERN_ERR PREFIX - "Invalid _PSS data: freq is zero\n"); + /* + * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq + */ + if (!px->core_frequency || + ((u32)(px->core_frequency * 1000) != + (px->core_frequency * 1000))) { + printk(KERN_ERR FW_BUG PREFIX + "Invalid BIOS _PSS frequency: 0x%llx MHz\n", + px->core_frequency); result = -EFAULT; kfree(pr->performance->states); goto end; diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 7f16f5f..2275437 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -840,7 +840,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) state = acpi_get_throttling_state(pr, value); if (state == -1) { ACPI_WARNING((AE_INFO, - "Invalid throttling state, reset\n")); + "Invalid throttling state, reset")); state = 0; ret = acpi_processor_set_throttling(pr, state); if (ret) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca9..1bdfb37 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -570,6 +570,22 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "eMachines E510", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), + }, + }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5315", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), + }, + }, {} }; @@ -2334,7 +2350,7 @@ static int __init acpi_video_init(void) return acpi_video_register(); } -void __exit acpi_video_exit(void) +void acpi_video_exit(void) { acpi_bus_unregister_driver(&acpi_video_bus); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index dc030f1..c659961 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -700,8 +700,10 @@ int bus_add_driver(struct device_driver *drv) } kobject_uevent(&priv->kobj, KOBJ_ADD); - return error; + return 0; out_unregister: + kfree(drv->p); + drv->p = NULL; kobject_put(&priv->kobj); out_put_bus: bus_put(bus); diff --git a/drivers/base/core.c b/drivers/base/core.c index 4aa527b..1977d4b 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -879,7 +879,7 @@ int device_add(struct device *dev) } if (!dev_name(dev)) - goto done; + goto name_error; pr_debug("device: '%s': %s\n", dev_name(dev), __func__); @@ -978,6 +978,9 @@ done: cleanup_device_parent(dev); if (parent) put_device(parent); +name_error: + kfree(dev->p); + dev->p = NULL; goto done; } diff --git a/drivers/base/driver.c b/drivers/base/driver.c index c51f11b..8ae0f63 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -257,6 +257,10 @@ EXPORT_SYMBOL_GPL(driver_register); */ void driver_unregister(struct device_driver *drv) { + if (!drv || !drv->p) { + WARN(1, "Unexpected driver unregister!\n"); + return; + } driver_remove_groups(drv, drv->groups); bus_remove_driver(drv); } diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 1955ee8..a600fc0 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -173,7 +173,7 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale)); #ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL - if (i7300_idle_platform_probe(NULL, NULL) == 0) { + if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) { device->common.chancnt--; } #endif diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index e5f5c5a..956982f 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -192,16 +192,20 @@ config EDAC_PPC4XX config EDAC_AMD8131 tristate "AMD8131 HyperTransport PCI-X Tunnel" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8131 HyperTransport PCI-X Tunnel chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. config EDAC_AMD8111 tristate "AMD8111 HyperTransport I/O Hub" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8111 HyperTransport I/O Hub chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index a5fdcf0..5907681 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -35,3 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o +obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o +obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c index 6146921..2cb58ef 100644 --- a/drivers/edac/amd8111_edac.c +++ b/drivers/edac/amd8111_edac.c @@ -389,7 +389,7 @@ static int amd8111_dev_probe(struct pci_dev *dev, dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = dev_info->check; @@ -473,7 +473,7 @@ static int amd8111_pci_probe(struct pci_dev *dev, pci_info->edac_dev->dev = &pci_info->dev->dev; pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; pci_info->edac_dev->ctl_name = pci_info->ctl_name; - pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id; + pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) pci_info->edac_dev->edac_check = pci_info->check; diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c index c083b31..b432d60 100644 --- a/drivers/edac/amd8131_edac.c +++ b/drivers/edac/amd8131_edac.c @@ -287,7 +287,7 @@ static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = amd8131_chipset.check; diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 4cd35d8..f5d46e7 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -67,12 +67,18 @@ config DRM_I830 will load the correct one. config DRM_I915 + tristate "i915 driver" select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB select FRAMEBUFFER_CONSOLE if !EMBEDDED - tristate "i915 driver" + # i915 depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you have a system that has Intel 830M, 845G, 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the @@ -84,12 +90,6 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 - # i915 KMS depends on ACPI_VIDEO when ACPI is enabled - # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI - select BACKLIGHT_CLASS_DEVICE if ACPI - select INPUT if ACPI - select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 717b6a8..670d128 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,6 +1145,13 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } + + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return VM_FAULT_SIGBUS; + } + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } @@ -2128,8 +2135,10 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) return; } - pitch_val = (obj_priv->stride / 128) - 1; - WARN_ON(pitch_val & ~0x0000000f); + pitch_val = obj_priv->stride / 128; + pitch_val = ffs(pitch_val) - 1; + WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL); + val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I830_FENCE_TILING_Y_SHIFT; @@ -2421,6 +2430,16 @@ i915_gem_clflush_object(struct drm_gem_object *obj) if (obj_priv->pages == NULL) return; + /* XXX: The 865 in particular appears to be weird in how it handles + * cache flushing. We haven't figured it out, but the + * clflush+agp_chipset_flush doesn't appear to successfully get the + * data visible to the PGU, while wbinvd + agp_chipset_flush does. + */ + if (IS_I865G(obj->dev)) { + wbinvd(); + return; + } + drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE); } diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 52a0593..540dd33 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -213,7 +213,8 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (tiling_mode == I915_TILING_NONE) return true; - if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) + if (!IS_I9XX(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) tile_width = 128; else tile_width = 512; @@ -225,11 +226,18 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (stride / 128 > I965_FENCE_MAX_PITCH_VAL) return false; } else if (IS_I9XX(dev)) { - if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB) + * instead of 4 (2KB) on 945s. + */ + if (pitch_val > I915_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 20)) return false; } else { - if (stride / 128 > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + if (pitch_val > I830_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 19)) return false; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9668cc0..375569d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -190,7 +190,8 @@ #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) -#define I830_FENCE_MAX_PITCH_VAL 0x10 +#define I915_FENCE_MAX_PITCH_VAL 0x10 +#define I830_FENCE_MAX_PITCH_VAL 6 #define I830_FENCE_MAX_SIZE_VAL (1<<8) #define I915_FENCE_START_MASK 0x0ff00000 diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index bf74039..949c97f 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -41,6 +41,10 @@ static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); +static int forceload; +module_param_named(forceload, forceload, uint, 0644); +MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000"); + #define dprintk(fmt, arg...) \ do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0) @@ -552,7 +556,7 @@ static int __init i7300_idle_init(void) cpus_clear(idle_cpumask); total_us = 0; - if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev)) + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) return -ENODEV; if (i7300_idle_thrt_save()) diff --git a/drivers/input/input.c b/drivers/input/input.c index e54e002..5d445f4 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -42,6 +42,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_POSITION_Y, ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, + ABS_MT_TRACKING_ID, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 67248c3..be5bbbb 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -210,7 +210,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) timeout = wait_event_timeout(ps2dev->wait, !(ps2dev->flags & PS2_FLAG_CMD1), timeout); - if (ps2dev->cmdcnt && timeout > 0) { + if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) { timeout = ps2_adjust_timeout(ps2dev, command, timeout); wait_event_timeout(ps2dev->wait, diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index f100c7f..6954f55 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -419,7 +419,7 @@ static int ucb1400_ts_remove(struct platform_device *dev) #ifdef CONFIG_PM static int ucb1400_ts_resume(struct platform_device *dev) { - struct ucb1400_ts *ucb = platform_get_drvdata(dev); + struct ucb1400_ts *ucb = dev->dev.platform_data; if (ucb->ts_task) { /* diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3c3626d..5d400ae 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= min(reshape_sectors, writepos); + writepos -= min_t(sector_t, reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= min(reshape_sectors, readpos); - safepos -= min(reshape_sectors, safepos); + readpos -= min_t(sector_t, reshape_sectors, readpos); + safepos -= min_t(sector_t, reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index f3548d0..40c2608 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -831,6 +831,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READID: + host->col_addr = 0; send_read_id(host); break; @@ -867,6 +868,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; + mtd->name = "mxc_nand"; /* 50 us command delay time */ this->chip_delay = 5; @@ -882,8 +884,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->verify_buf = mxc_nand_verify_buf; host->clk = clk_get(&pdev->dev, "nfc"); - if (IS_ERR(host->clk)) + if (IS_ERR(host->clk)) { + err = PTR_ERR(host->clk); goto eclk; + } clk_enable(host->clk); host->clk_act = 1; @@ -896,7 +900,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->regs = ioremap(res->start, res->end - res->start + 1); if (!host->regs) { - err = -EIO; + err = -ENOMEM; goto eres; } @@ -1011,30 +1015,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); - if (info) - ret = info->suspend(info); - - /* Disable the NFC clock */ - clk_disable(nfc_clk); /* FIXME */ + if (mtd) { + ret = mtd->suspend(mtd); + /* Disable the NFC clock */ + clk_disable(host->clk); + } return ret; } static int mxcnd_resume(struct platform_device *pdev) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); - /* Enable the NFC clock */ - clk_enable(nfc_clk); /* FIXME */ - if (info) - info->resume(info); + if (mtd) { + /* Enable the NFC clock */ + clk_enable(host->clk); + mtd->resume(mtd); + } return ret; } @@ -1055,13 +1064,7 @@ static struct platform_driver mxcnd_driver = { static int __init mxc_nd_init(void) { - /* Register the device driver structure. */ - pr_info("MXC MTD nand Driver\n"); - if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) { - printk(KERN_ERR "Driver register failed for mxcnd_driver\n"); - return -ENODEV; - } - return 0; + return platform_driver_probe(&mxcnd_driver, mxcnd_probe); } static void __exit mxc_nd_cleanup(void) diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index e6a7e84..ea31a45 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -352,8 +352,8 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", - dev->hpa.start); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n", + (unsigned long long)dev->hpa.start); return -ENODEV; } diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b4b3981..a0127e9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -137,6 +137,7 @@ struct uart_8250_port { unsigned char mcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ /* * Some bits in registers are cleared on a read, so they must @@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) static void set_io_from_upio(struct uart_port *p) { + struct uart_8250_port *up = (struct uart_8250_port *)p; switch (p->iotype) { case UPIO_HUB6: p->serial_in = hub6_serial_in; @@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = io_serial_out; break; } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; } static void @@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port) up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (up->port.type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; @@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) @@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + serial8250_isa_init_ports(); for (i = 0; i < nr_uarts; i++) { diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 418b4fe..33149d9 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) printk(KERN_INFO - "Serial: device 0x%lx not configured.\n" + "Serial: device 0x%llx not configured.\n" "Enable support for Wax, Lasi, Asp or Dino.\n", - dev->hpa.start); + (unsigned long long)dev->hpa.start); return -ENODEV; } diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7f72f8c..b3feb61 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options) pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", co, co->index, options); - if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) { + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { pr_debug("PSC%x out of range\n", co->index); return -EINVAL; } diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 0716cdb..0a3dc5e 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ -obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0a69c09..7a1164d 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1375,6 +1375,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 563d572..05c913c 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (ep->desc) { list_add_tail(&req->queue, &ep->queue); - if (ep->is_in || (ep_is_control(ep) + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) && (ep->state == DATA_STAGE_IN || ep->state == STATUS_STAGE_IN))) usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); @@ -1940,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); - usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep, + usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep, GFP_KERNEL); if (!usba_ep) goto err_alloc_ep; diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index cd07ea3..1543846 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 reg_base, or_reg, skip_reg; unsigned long flags; struct ptd ptd; + packet_enqueue *pe; switch (usb_pipetype(urb->pipe)) { case PIPE_ISOCHRONOUS: @@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = INT_REGS_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; + pe = enqueue_an_INT_packet; break; default: @@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = ATL_REGS_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; + pe = enqueue_an_ATL_packet; break; } @@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; + struct isp1760_qh *qh = ints->qh; skip_map = isp1760_readl(hcd->regs + skip_reg); skip_map |= 1 << i; @@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base + i * sizeof(ptd), sizeof(ptd)); qtd = ints->qtd; - - clean_up_qtdlist(qtd); + qtd = clean_up_qtdlist(qtd); free_mem(priv, ints->payload); @@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, ints->payload = 0; isp1760_urb_done(priv, urb, status); + if (qtd) + pe(hcd, qh, qtd); break; + + } else if (ints->qtd) { + struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + + for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + if (qtd->urb == urb) { + prev_qtd->hw_next = clean_up_qtdlist(qtd); + isp1760_urb_done(priv, urb, status); + break; + } + prev_qtd = qtd; + } + /* we found the urb before the end of the list */ + if (qtd) + break; } ints++; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0a566ee..f331e2b 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -974,6 +974,7 @@ int usb_serial_probe(struct usb_interface *interface, if (retval > 0) { /* quietly accept this device, but don't bind to a serial port as it's about to disappear */ + serial->num_ports = 0; goto exit; } } diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 9a577a8..2fb63f6 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -29,14 +29,8 @@ /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 -#define ATMEL_LCDC_DMA_BURST_LEN 8 - -#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \ - defined(CONFIG_ARCH_AT91SAM9RL) -#define ATMEL_LCDC_FIFO_SIZE 2048 -#else -#define ATMEL_LCDC_FIFO_SIZE 512 -#endif +#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ +#define ATMEL_LCDC_FIFO_SIZE 512 /* words */ #if defined(CONFIG_ARCH_AT91) #define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 5e9c630..d3a568e 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -947,7 +947,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev) int win; for (win = 0; win <= S3C_FB_MAX_WIN; win++) - s3c_fb_release_win(sfb, sfb->windows[win]); + if (sfb->windows[win]) + s3c_fb_release_win(sfb, sfb->windows[win]); iounmap(sfb->regs); @@ -985,11 +986,20 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_fb_resume(struct platform_device *pdev) { struct s3c_fb *sfb = platform_get_drvdata(pdev); + struct s3c_fb_platdata *pd = sfb->pdata; struct s3c_fb_win *win; int win_no; clk_enable(sfb->bus_clk); + /* setup registers */ + writel(pd->vidcon1, sfb->regs + VIDCON1); + + /* zero all windows before we do anything */ + for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) + s3c_fb_clear_win(sfb, win_no); + + /* restore framebuffers */ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) { win = sfb->windows[win_no]; if (!win) diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 5cebf0b..697f6b5 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -41,6 +41,7 @@ #include <asm/uaccess.h> #include <asm/unaligned.h> #include <asm/cacheflush.h> +#include <asm/page.h> /****************************************************************************/ @@ -54,6 +55,18 @@ #define DBG_FLT(a...) #endif +/* + * User data (stack, data section and bss) needs to be aligned + * for the same reasons as SLAB memory is, and to the same amount. + * Avoid duplicating architecture specific code by using the same + * macro as with SLAB allocation: + */ +#ifdef ARCH_SLAB_MINALIGN +#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN) +#else +#define FLAT_DATA_ALIGN (sizeof(void *)) +#endif + #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */ #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */ @@ -114,20 +127,18 @@ static unsigned long create_flat_tables( int envc = bprm->envc; char uninitialized_var(dummy); - sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p); + sp = (unsigned long *)p; + sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0); + sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN); + argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0); + envp = argv + (argc + 1); - sp -= envc+1; - envp = sp; - sp -= argc+1; - argv = sp; - - flat_stack_align(sp); if (flat_argvp_envp_on_stack()) { - --sp; put_user((unsigned long) envp, sp); - --sp; put_user((unsigned long) argv, sp); + put_user((unsigned long) envp, sp + 2); + put_user((unsigned long) argv, sp + 1); } - put_user(argc,--sp); + put_user(argc, sp); current->mm->arg_start = (unsigned long) p; while (argc-->0) { put_user((unsigned long) p, argv++); @@ -558,7 +569,9 @@ static int load_flat_file(struct linux_binprm * bprm, ret = realdatastart; goto err; } - datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long); + datapos = ALIGN(realdatastart + + MAX_SHARED_LIBS * sizeof(unsigned long), + FLAT_DATA_ALIGN); DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n", (int)(data_len + bss_len + stack_len), (int)datapos); @@ -604,9 +617,12 @@ static int load_flat_file(struct linux_binprm * bprm, } realdatastart = textpos + ntohl(hdr->data_start); - datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long); - reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) + - MAX_SHARED_LIBS * sizeof(unsigned long)); + datapos = ALIGN(realdatastart + + MAX_SHARED_LIBS * sizeof(unsigned long), + FLAT_DATA_ALIGN); + + reloc = (unsigned long *) + (datapos + (ntohl(hdr->reloc_start) - text_len)); memp = textpos; memp_size = len; #ifdef CONFIG_BINFMT_ZFLAT @@ -854,7 +870,7 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs) stack_len = TOP_OF_ARGS - bprm->p; /* the strings */ stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */ stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */ - + stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */ res = load_flat_file(bprm, &libinfo, 0, &stack_len); if (res > (unsigned long)-4096) diff --git a/fs/cachefiles/internal.h b/fs/cachefiles/internal.h index 19218e1..f7c255f 100644 --- a/fs/cachefiles/internal.h +++ b/fs/cachefiles/internal.h @@ -122,13 +122,13 @@ static inline void cachefiles_state_changed(struct cachefiles_cache *cache) } /* - * cf-bind.c + * bind.c */ extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args); extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache); /* - * cf-daemon.c + * daemon.c */ extern const struct file_operations cachefiles_daemon_fops; @@ -136,17 +136,17 @@ extern int cachefiles_has_space(struct cachefiles_cache *cache, unsigned fnr, unsigned bnr); /* - * cf-interface.c + * interface.c */ extern const struct fscache_cache_ops cachefiles_cache_ops; /* - * cf-key.c + * key.c */ extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type); /* - * cf-namei.c + * namei.c */ extern int cachefiles_delete_object(struct cachefiles_cache *cache, struct cachefiles_object *object); @@ -165,7 +165,7 @@ extern int cachefiles_check_in_use(struct cachefiles_cache *cache, struct dentry *dir, char *filename); /* - * cf-proc.c + * proc.c */ #ifdef CONFIG_CACHEFILES_HISTOGRAM extern atomic_t cachefiles_lookup_histogram[HZ]; @@ -190,7 +190,7 @@ void cachefiles_hist(atomic_t histogram[], unsigned long start_jif) #endif /* - * cf-rdwr.c + * rdwr.c */ extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *, struct page *, gfp_t); @@ -205,7 +205,7 @@ extern int cachefiles_write_page(struct fscache_storage *, struct page *); extern void cachefiles_uncache_page(struct fscache_object *, struct page *); /* - * cf-security.c + * security.c */ extern int cachefiles_get_security_ID(struct cachefiles_cache *cache); extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache, @@ -225,7 +225,7 @@ static inline void cachefiles_end_secure(struct cachefiles_cache *cache, } /* - * cf-xattr.c + * xattr.c */ extern int cachefiles_check_object_type(struct cachefiles_object *object); extern int cachefiles_set_object_xattr(struct cachefiles_object *object, diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index e0cbd16..1c34130 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -28,7 +28,7 @@ #define FSCACHE_MAX_THREADS 32 /* - * fsc-cache.c + * cache.c */ extern struct list_head fscache_cache_list; extern struct rw_semaphore fscache_addremove_sem; @@ -37,7 +37,7 @@ extern struct fscache_cache *fscache_select_cache_for_object( struct fscache_cookie *); /* - * fsc-cookie.c + * cookie.c */ extern struct kmem_cache *fscache_cookie_jar; @@ -45,13 +45,13 @@ extern void fscache_cookie_init_once(void *); extern void __fscache_cookie_put(struct fscache_cookie *); /* - * fsc-fsdef.c + * fsdef.c */ extern struct fscache_cookie fscache_fsdef_index; extern struct fscache_cookie_def fscache_fsdef_netfs_def; /* - * fsc-histogram.c + * histogram.c */ #ifdef CONFIG_FSCACHE_HISTOGRAM extern atomic_t fscache_obj_instantiate_histogram[HZ]; @@ -75,7 +75,7 @@ extern const struct file_operations fscache_histogram_fops; #endif /* - * fsc-main.c + * main.c */ extern unsigned fscache_defer_lookup; extern unsigned fscache_defer_create; @@ -86,14 +86,14 @@ extern int fscache_wait_bit(void *); extern int fscache_wait_bit_interruptible(void *); /* - * fsc-object.c + * object.c */ extern void fscache_withdrawing_object(struct fscache_cache *, struct fscache_object *); extern void fscache_enqueue_object(struct fscache_object *); /* - * fsc-operation.c + * operation.c */ extern int fscache_submit_exclusive_op(struct fscache_object *, struct fscache_operation *); @@ -104,7 +104,7 @@ extern void fscache_start_operations(struct fscache_object *); extern void fscache_operation_gc(struct work_struct *); /* - * fsc-proc.c + * proc.c */ #ifdef CONFIG_PROC_FS extern int __init fscache_proc_init(void); @@ -115,7 +115,7 @@ extern void fscache_proc_cleanup(void); #endif /* - * fsc-stats.c + * stats.c */ #ifdef CONFIG_FSCACHE_STATS extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS]; diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index c32b4a1..a024474 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -480,13 +480,6 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb return; filebad: - mutex_lock(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - /* Stick it on a list (any list) so erase_failed can take it - right off again. Silly, but shouldn't happen often. */ - list_move(&jeb->list, &c->erasing_list); - spin_unlock(&c->erase_completion_lock); - mutex_unlock(&c->erase_free_sem); jffs2_erase_failed(c, jeb, bad_offset); return; diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 6c68ffd..b660435 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1015,6 +1015,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file, host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset); set_fs(oldfs); if (host_err >= 0) { + *cnt = host_err; nfsdstats.io_write += host_err; fsnotify_modify(file->f_path.dentry); } @@ -1060,10 +1061,9 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file, } dprintk("nfsd: write complete host_err=%d\n", host_err); - if (host_err >= 0) { + if (host_err >= 0) err = 0; - *cnt = host_err; - } else + else err = nfserrno(host_err); out: return err; diff --git a/fs/proc/base.c b/fs/proc/base.c index fb45615..3326bbf 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1956,7 +1956,7 @@ static struct dentry *proc_pident_instantiate(struct inode *dir, const struct pid_entry *p = ptr; struct inode *inode; struct proc_inode *ei; - struct dentry *error = ERR_PTR(-EINVAL); + struct dentry *error = ERR_PTR(-ENOENT); inode = proc_pid_make_inode(dir->i_sb, task); if (!inode) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index b1606e0..561a9c0 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -723,7 +723,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_unlock(&sysfs_workq_mutex); if (sysfs_workqueue == NULL) { - sysfs_workqueue = create_workqueue("sysfsd"); + sysfs_workqueue = create_singlethread_workqueue("sysfsd"); if (sysfs_workqueue == NULL) { module_put(owner); return -ENOMEM; diff --git a/include/linux/cred.h b/include/linux/cred.h index 3282ee4..4fa9996 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -13,6 +13,7 @@ #define _LINUX_CRED_H #include <linux/capability.h> +#include <linux/init.h> #include <linux/key.h> #include <asm/atomic.h> diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h index 05a80c4..1587b7d 100644 --- a/include/linux/i7300_idle.h +++ b/include/linux/i7300_idle.h @@ -16,35 +16,33 @@ struct fbd_ioat { unsigned int vendor; unsigned int ioat_dev; + unsigned int enabled; }; /* * The i5000 chip-set has the same hooks as the i7300 - * but support is disabled by default because this driver - * has not been validated on that platform. + * but it is not enabled by default and must be manually + * manually enabled with "forceload=1" because it is + * only lightly validated. */ -#define SUPPORT_I5000 0 static const struct fbd_ioat fbd_ioat_list[] = { - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB}, -#if SUPPORT_I5000 - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT}, -#endif + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0}, {0, 0} }; /* table of devices that work with this driver */ static const struct pci_device_id pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) }, -#if SUPPORT_I5000 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, -#endif { } /* Terminating entry */ }; /* Check for known platforms with I/O-AT */ static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev, - struct pci_dev **ioat_dev) + struct pci_dev **ioat_dev, + int enable_all) { int i; struct pci_dev *memdev, *dmadev; @@ -69,6 +67,8 @@ static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev, for (i = 0; fbd_ioat_list[i].vendor != 0; i++) { if (dmadev->vendor == fbd_ioat_list[i].vendor && dmadev->device == fbd_ioat_list[i].ioat_dev) { + if (!(fbd_ioat_list[i].enabled || enable_all)) + continue; if (fbd_dev) *fbd_dev = memdev; if (ioat_dev) diff --git a/include/linux/input.h b/include/linux/input.h index 0e6ff5d..6fed4f6 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -656,6 +656,7 @@ struct input_absinfo { #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) diff --git a/include/linux/swap.h b/include/linux/swap.h index 62d8143..d476aad 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -437,6 +437,11 @@ static inline int mem_cgroup_cache_charge_swapin(struct page *page, return 0; } +static inline void +mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) +{ +} + #endif /* CONFIG_SWAP */ #endif /* __KERNEL__*/ #endif /* _LINUX_SWAP_H */ diff --git a/mm/filemap.c b/mm/filemap.c index 379ff0bc..1b60f30 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -121,7 +121,6 @@ void __remove_from_page_cache(struct page *page) mapping->nrpages--; __dec_zone_page_state(page, NR_FILE_PAGES); BUG_ON(page_mapped(page)); - mem_cgroup_uncharge_cache_page(page); /* * Some filesystems seem to re-dirty the page even after @@ -145,6 +144,7 @@ void remove_from_page_cache(struct page *page) spin_lock_irq(&mapping->tree_lock); __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_cache_page(page); } static int sync_page(void *word) @@ -476,13 +476,13 @@ int add_to_page_cache_locked(struct page *page, struct address_space *mapping, if (likely(!error)) { mapping->nrpages++; __inc_zone_page_state(page, NR_FILE_PAGES); + spin_unlock_irq(&mapping->tree_lock); } else { page->mapping = NULL; + spin_unlock_irq(&mapping->tree_lock); mem_cgroup_uncharge_cache_page(page); page_cache_release(page); } - - spin_unlock_irq(&mapping->tree_lock); radix_tree_preload_end(); } else mem_cgroup_uncharge_cache_page(page); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 28c655b..e83ad2c 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -316,7 +316,7 @@ static void resv_map_release(struct kref *ref) static struct resv_map *vma_resv_map(struct vm_area_struct *vma) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - if (!(vma->vm_flags & VM_SHARED)) + if (!(vma->vm_flags & VM_MAYSHARE)) return (struct resv_map *)(get_vma_private_data(vma) & ~HPAGE_RESV_MASK); return NULL; @@ -325,7 +325,7 @@ static struct resv_map *vma_resv_map(struct vm_area_struct *vma) static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - VM_BUG_ON(vma->vm_flags & VM_SHARED); + VM_BUG_ON(vma->vm_flags & VM_MAYSHARE); set_vma_private_data(vma, (get_vma_private_data(vma) & HPAGE_RESV_MASK) | (unsigned long)map); @@ -334,7 +334,7 @@ static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map) static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - VM_BUG_ON(vma->vm_flags & VM_SHARED); + VM_BUG_ON(vma->vm_flags & VM_MAYSHARE); set_vma_private_data(vma, get_vma_private_data(vma) | flags); } @@ -353,7 +353,7 @@ static void decrement_hugepage_resv_vma(struct hstate *h, if (vma->vm_flags & VM_NORESERVE) return; - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { /* Shared mappings always use reserves */ h->resv_huge_pages--; } else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) { @@ -369,14 +369,14 @@ static void decrement_hugepage_resv_vma(struct hstate *h, void reset_vma_resv_huge_pages(struct vm_area_struct *vma) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - if (!(vma->vm_flags & VM_SHARED)) + if (!(vma->vm_flags & VM_MAYSHARE)) vma->vm_private_data = (void *)0; } /* Returns true if the VMA has associated reserve pages */ static int vma_has_reserves(struct vm_area_struct *vma) { - if (vma->vm_flags & VM_SHARED) + if (vma->vm_flags & VM_MAYSHARE) return 1; if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) return 1; @@ -924,7 +924,7 @@ static long vma_needs_reservation(struct hstate *h, struct address_space *mapping = vma->vm_file->f_mapping; struct inode *inode = mapping->host; - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { pgoff_t idx = vma_hugecache_offset(h, vma, addr); return region_chg(&inode->i_mapping->private_list, idx, idx + 1); @@ -949,7 +949,7 @@ static void vma_commit_reservation(struct hstate *h, struct address_space *mapping = vma->vm_file->f_mapping; struct inode *inode = mapping->host; - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { pgoff_t idx = vma_hugecache_offset(h, vma, addr); region_add(&inode->i_mapping->private_list, idx, idx + 1); @@ -1893,7 +1893,7 @@ retry_avoidcopy: * at the time of fork() could consume its reserves on COW instead * of the full address range. */ - if (!(vma->vm_flags & VM_SHARED) && + if (!(vma->vm_flags & VM_MAYSHARE) && is_vma_resv_set(vma, HPAGE_RESV_OWNER) && old_page != pagecache_page) outside_reserve = 1; @@ -2000,7 +2000,7 @@ retry: clear_huge_page(page, address, huge_page_size(h)); __SetPageUptodate(page); - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { int err; struct inode *inode = mapping->host; @@ -2104,7 +2104,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, goto out_mutex; } - if (!(vma->vm_flags & VM_SHARED)) + if (!(vma->vm_flags & VM_MAYSHARE)) pagecache_page = hugetlbfs_pagecache_page(h, vma, address); } @@ -2289,7 +2289,7 @@ int hugetlb_reserve_pages(struct inode *inode, * to reserve the full area even if read-only as mprotect() may be * called to make the mapping read-write. Assume !vma is a shm mapping */ - if (!vma || vma->vm_flags & VM_SHARED) + if (!vma || vma->vm_flags & VM_MAYSHARE) chg = region_chg(&inode->i_mapping->private_list, from, to); else { struct resv_map *resv_map = resv_map_alloc(); @@ -2330,7 +2330,7 @@ int hugetlb_reserve_pages(struct inode *inode, * consumed reservations are stored in the map. Hence, nothing * else has to be done for private mappings here */ - if (!vma || vma->vm_flags & VM_SHARED) + if (!vma || vma->vm_flags & VM_MAYSHARE) region_add(&inode->i_mapping->private_list, from, to); return 0; } diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 01c2d8f..78eb855 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -314,14 +314,6 @@ static struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm) return mem; } -static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem) -{ - if (!mem) - return true; - return css_is_removed(&mem->css); -} - - /* * Call callback function against all cgroup under hierarchy tree. */ @@ -932,7 +924,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, if (unlikely(!mem)) return 0; - VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem)); + VM_BUG_ON(css_is_removed(&mem->css)); while (1) { int ret; @@ -1488,8 +1480,9 @@ void mem_cgroup_uncharge_cache_page(struct page *page) __mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE); } +#ifdef CONFIG_SWAP /* - * called from __delete_from_swap_cache() and drop "page" account. + * called after __delete_from_swap_cache() and drop "page" account. * memcg information is recorded to swap_cgroup of "ent" */ void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) @@ -1506,6 +1499,7 @@ void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) if (memcg) css_put(&memcg->css); } +#endif #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP /* diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 92bcf1d..a7b2460 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -284,22 +284,28 @@ static void dump_tasks(const struct mem_cgroup *mem) printk(KERN_INFO "[ pid ] uid tgid total_vm rss cpu oom_adj " "name\n"); do_each_thread(g, p) { - /* - * total_vm and rss sizes do not exist for tasks with a - * detached mm so there's no need to report them. - */ - if (!p->mm) - continue; + struct mm_struct *mm; + if (mem && !task_in_mem_cgroup(p, mem)) continue; if (!thread_group_leader(p)) continue; task_lock(p); + mm = p->mm; + if (!mm) { + /* + * total_vm and rss sizes do not exist for tasks with no + * mm so there's no need to report them; they can't be + * oom killed anyway. + */ + task_unlock(p); + continue; + } printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n", - p->pid, __task_cred(p)->uid, p->tgid, - p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p), - p->oomkilladj, p->comm); + p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm, + get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj, + p->comm); task_unlock(p); } while_each_thread(g, p); } diff --git a/mm/swap_state.c b/mm/swap_state.c index 3ecea98..1416e7e 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -109,8 +109,6 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask) */ void __delete_from_swap_cache(struct page *page) { - swp_entry_t ent = {.val = page_private(page)}; - VM_BUG_ON(!PageLocked(page)); VM_BUG_ON(!PageSwapCache(page)); VM_BUG_ON(PageWriteback(page)); @@ -121,7 +119,6 @@ void __delete_from_swap_cache(struct page *page) total_swapcache_pages--; __dec_zone_page_state(page, NR_FILE_PAGES); INC_CACHE_INFO(del_total); - mem_cgroup_uncharge_swapcache(page, ent); } /** @@ -191,6 +188,7 @@ void delete_from_swap_cache(struct page *page) __delete_from_swap_cache(page); spin_unlock_irq(&swapper_space.tree_lock); + mem_cgroup_uncharge_swapcache(page, entry); swap_free(entry); page_cache_release(page); } diff --git a/mm/truncate.c b/mm/truncate.c index 55206fa..12e1579 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -359,6 +359,7 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page) BUG_ON(page_has_private(page)); __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_cache_page(page); page_cache_release(page); /* pagecache ref */ return 1; failed: diff --git a/mm/vmscan.c b/mm/vmscan.c index 5fa3eda..d254306 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -470,10 +470,12 @@ static int __remove_mapping(struct address_space *mapping, struct page *page) swp_entry_t swap = { .val = page_private(page) }; __delete_from_swap_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_swapcache(page, swap); swap_free(swap); } else { __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_cache_page(page); } return 1; diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index af31988..9d50423 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -345,6 +345,7 @@ static void svc_sock_setbufsize(struct socket *sock, unsigned int snd, lock_sock(sock->sk); sock->sk->sk_sndbuf = snd * 2; sock->sk->sk_rcvbuf = rcv * 2; + sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK; release_sock(sock->sk); #endif } @@ -796,6 +797,23 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags), test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags)); + if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags)) + /* sndbuf needs to have room for one request + * per thread, otherwise we can stall even when the + * network isn't a bottleneck. + * + * We count all threads rather than threads in a + * particular pool, which provides an upper bound + * on the number of threads which will access the socket. + * + * rcvbuf just needs to be able to hold a few requests. + * Normally they will be removed from the queue + * as soon a a complete request arrives. + */ + svc_sock_setbufsize(svsk->sk_sock, + (serv->sv_nrthreads+3) * serv->sv_max_mesg, + 3 * serv->sv_max_mesg); + clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); /* Receive data. If we haven't got the record length yet, get @@ -1043,6 +1061,15 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv) tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF; + /* initialise setting must have enough space to + * receive and respond to one request. + * svc_tcp_recvfrom will re-adjust if necessary + */ + svc_sock_setbufsize(svsk->sk_sock, + 3 * svsk->sk_xprt.xpt_server->sv_max_mesg, + 3 * svsk->sk_xprt.xpt_server->sv_max_mesg); + + set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags); set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); if (sk->sk_state != TCP_ESTABLISHED) set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags); @@ -1112,14 +1139,8 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv, /* Initialize the socket */ if (sock->type == SOCK_DGRAM) svc_udp_init(svsk, serv); - else { - /* initialise setting must have enough space to - * receive and respond to one request. - */ - svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg, - 4 * serv->sv_max_mesg); + else svc_tcp_init(svsk, serv); - } dprintk("svc: svc_setup_socket created %p (inet %p)\n", svsk, svsk->sk_sk); diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c index 8b510c5..f11be72 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c +++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c @@ -128,7 +128,8 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt, page_bytes -= sge_bytes; frmr->page_list->page_list[page_no] = - ib_dma_map_page(xprt->sc_cm_id->device, page, 0, + ib_dma_map_single(xprt->sc_cm_id->device, + page_address(page), PAGE_SIZE, DMA_TO_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, frmr->page_list->page_list[page_no])) @@ -532,18 +533,17 @@ static int send_reply(struct svcxprt_rdma *rdma, clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags); /* Prepare the SGE for the RPCRDMA Header */ + ctxt->sge[0].lkey = rdma->sc_dma_lkey; + ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp); ctxt->sge[0].addr = - ib_dma_map_page(rdma->sc_cm_id->device, - page, 0, PAGE_SIZE, DMA_TO_DEVICE); + ib_dma_map_single(rdma->sc_cm_id->device, page_address(page), + ctxt->sge[0].length, DMA_TO_DEVICE); if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr)) goto err; atomic_inc(&rdma->sc_dma_used); ctxt->direction = DMA_TO_DEVICE; - ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp); - ctxt->sge[0].lkey = rdma->sc_dma_lkey; - /* Determine how many of our SGE are to be transmitted */ for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) { sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count); diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 4b0c2fa..5151f9f 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -500,8 +500,8 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt) BUG_ON(sge_no >= xprt->sc_max_sge); page = svc_rdma_get_page(); ctxt->pages[sge_no] = page; - pa = ib_dma_map_page(xprt->sc_cm_id->device, - page, 0, PAGE_SIZE, + pa = ib_dma_map_single(xprt->sc_cm_id->device, + page_address(page), PAGE_SIZE, DMA_FROM_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa)) goto err_put_ctxt; @@ -1315,8 +1315,8 @@ void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp, length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va); /* Prepare SGE for local address */ - sge.addr = ib_dma_map_page(xprt->sc_cm_id->device, - p, 0, PAGE_SIZE, DMA_FROM_DEVICE); + sge.addr = ib_dma_map_single(xprt->sc_cm_id->device, + page_address(p), PAGE_SIZE, DMA_FROM_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) { put_page(p); return; @@ -1343,7 +1343,7 @@ void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp, if (ret) { dprintk("svcrdma: Error %d posting send for protocol error\n", ret); - ib_dma_unmap_page(xprt->sc_cm_id->device, + ib_dma_unmap_single(xprt->sc_cm_id->device, sge.addr, PAGE_SIZE, DMA_FROM_DEVICE); svc_rdma_put_context(ctxt, 1); diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 5b48191..e42be5c 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -27,6 +27,12 @@ static int tomoyo_cred_prepare(struct cred *new, const struct cred *old, static int tomoyo_bprm_set_creds(struct linux_binprm *bprm) { + int rc; + + rc = cap_bprm_set_creds(bprm); + if (rc) + return rc; + /* * Do only if this function is called for the first time of an execve * operation. diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index a2a792c..d659995 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -249,6 +249,11 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } + + /* Do jiffies check only in xrun_debug mode */ + if (!xrun_debug(substream)) + goto no_jiffies_check; + /* Skip the jiffies check for hardwares with BATCH flag. * Such hardware usually just increases the position at each IRQ, * thus it can't give any strange position. @@ -336,7 +341,9 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) hw_base = 0; new_hw_ptr = hw_base + pos; } - if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) { + /* Do jiffies check only in xrun_debug mode */ + if (xrun_debug(substream) && + ((delta * HZ) / runtime->rate) > jdelta + HZ/100) { hw_ptr_error(substream, "hw_ptr skipping! " "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n", @@ -1478,7 +1485,6 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream, runtime->status->hw_ptr %= runtime->buffer_size; else runtime->status->hw_ptr = 0; - runtime->hw_ptr_jiffies = jiffies; snd_pcm_stream_unlock_irqrestore(substream, flags); return 0; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index fc6f98e..b5da656 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -848,6 +848,7 @@ static void snd_pcm_post_start(struct snd_pcm_substream *substream, int state) { struct snd_pcm_runtime *runtime = substream->runtime; snd_pcm_trigger_tstamp(substream); + runtime->hw_ptr_jiffies = jiffies; runtime->status->state = state; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) @@ -961,6 +962,11 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push) { if (substream->runtime->trigger_master != substream) return 0; + /* The jiffies check in snd_pcm_update_hw_ptr*() is done by + * a delta betwen the current jiffies, this gives a large enough + * delta, effectively to skip the check once. + */ + substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000; return substream->ops->trigger(substream, push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH : SNDRV_PCM_TRIGGER_PAUSE_RELEASE); diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 56ce19e..4fcbe21 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1848,6 +1848,7 @@ static const char *cxt5051_models[CXT5051_MODELS] = { static struct snd_pci_quirk cxt5051_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736), + SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP), SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5051_LAPTOP), SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP), diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 823296d..a6b8848 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -3347,7 +3347,7 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface, [QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface, [QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface, - [QUIRK_MIDI_RAW] = snd_usb_create_midi_interface, + [QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface, [QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface, [QUIRK_MIDI_CME] = snd_usb_create_midi_interface, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 36e4f7a..8e7f789 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -153,7 +153,7 @@ enum quirk_type { QUIRK_MIDI_YAMAHA, QUIRK_MIDI_MIDIMAN, QUIRK_MIDI_NOVATION, - QUIRK_MIDI_RAW, + QUIRK_MIDI_FASTLANE, QUIRK_MIDI_EMAGIC, QUIRK_MIDI_CME, QUIRK_MIDI_US122L, diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index 26bad37..2fb35cc 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -1778,8 +1778,18 @@ int snd_usb_create_midi_interface(struct snd_usb_audio* chip, umidi->usb_protocol_ops = &snd_usbmidi_novation_ops; err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); break; - case QUIRK_MIDI_RAW: + case QUIRK_MIDI_FASTLANE: umidi->usb_protocol_ops = &snd_usbmidi_raw_ops; + /* + * Interface 1 contains isochronous endpoints, but with the same + * numbers as in interface 0. Since it is interface 1 that the + * USB core has most recently seen, these descriptors are now + * associated with the endpoint numbers. This will foul up our + * attempts to submit bulk/interrupt URBs to the endpoints in + * interface 0, so we have to make sure that the USB core looks + * again at interface 0 by calling usb_set_interface() on it. + */ + usb_set_interface(umidi->chip->dev, 0, 0); err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); break; case QUIRK_MIDI_EMAGIC: diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 647ef50..5d955aa 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1868,7 +1868,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .data = & (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, - .type = QUIRK_MIDI_RAW + .type = QUIRK_MIDI_FASTLANE }, { .ifnum = 1, |