1 files changed, 0 insertions, 244 deletions
diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c
deleted file mode 100644
index 785a07b..0000000
--- a/arch/arm/mach-orion/kurobox_pro-setup.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * arch/arm/mach-orion/kurobox_pro-setup.c
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
-#include "common.h"
-
-/*****************************************************************************
- * KUROBOX-PRO Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define KUROBOX_PRO_NOR_BOOT_BASE	0xf4000000
-#define KUROBOX_PRO_NOR_BOOT_SIZE	SZ_256K
-
-/*
- * 256M NAND flash on Device bus chip select 1
- */
-
-#define KUROBOX_PRO_NAND_BASE		0xfc000000
-#define KUROBOX_PRO_NAND_SIZE		SZ_2M
-
-/*****************************************************************************
- * 256MB NAND Flash on Device bus CS0
- ****************************************************************************/
-
-static struct mtd_partition kurobox_pro_nand_parts[] = {
-	{
-		.name	= "uImage",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= SZ_4M,
-		.size	= SZ_64M,
-	},
-	{
-		.name	= "extra",
-		.offset	= SZ_4M + SZ_64M,
-		.size	= SZ_256M - (SZ_4M + SZ_64M),
-	},
-};
-
-static struct resource kurobox_pro_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KUROBOX_PRO_NAND_BASE,
-	.end		= KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data kurobox_pro_nand_data = {
-	.parts		= kurobox_pro_nand_parts,
-	.nr_parts	= ARRAY_SIZE(kurobox_pro_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device kurobox_pro_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &kurobox_pro_nand_data,
-	},
-	.resource	= &kurobox_pro_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data kurobox_pro_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource kurobox_pro_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= KUROBOX_PRO_NOR_BOOT_BASE,
-	.end			= KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device kurobox_pro_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &kurobox_pro_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &kurobox_pro_nor_flash_resource,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * PCI isn't used on the Kuro
-	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
-	else
-		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
-
-	return -1;
-}
-
-static struct hw_pci kurobox_pro_pci __initdata = {
-	.nr_controllers	= 1,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
-	.map_irq	= kurobox_pro_pci_map_irq,
-};
-
-static int __init kurobox_pro_pci_init(void)
-{
-	if (machine_is_kurobox_pro())
-		pci_common_init(&kurobox_pro_pci);
-
-	return 0;
-}
-
-subsys_initcall(kurobox_pro_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
-	.phy_addr	= 8,
-	.force_phy_addr = 1,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
-       .driver_name    = "rtc-rs5c372",
-       .type           = "rs5c372a",
-       .addr           = 0x32,
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data kurobox_pro_sata_data = {
-	.n_ports        = 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static struct platform_device *kurobox_pro_devices[] __initdata = {
-	&kurobox_pro_nor_flash,
-	&kurobox_pro_nand_flash,
-};
-
-static void __init kurobox_pro_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion_init();
-
-	/*
-	 * Setup the CPU address decode windows for our devices
-	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE,
-				KUROBOX_PRO_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV0,	KUROBOX_PRO_NAND_BASE,
-				KUROBOX_PRO_NAND_SIZE, -1);
-	/*
-	 * Open a special address decode windows for the PCIE WA.
-	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
-
-	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0-1] Not used
-	 * MPP[2] GPIO Micon
-	 * MPP[3] GPIO RTC
-	 * MPP[4-5] Not used
-	 * MPP[6] Nand Flash REn
-	 * MPP[7] Nand Flash WEn
-	 * MPP[8-11] Not used
-	 * MPP[12] SATA 0 presence Indication
-	 * MPP[13] SATA 1 presence Indication
-	 * MPP[14] SATA 0 active Indication
-	 * MPP[15] SATA 1 active indication
-	 * MPP[16-19] Not used
-	 */
-	orion_write(MPP_0_7_CTRL, 0x44220003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x0);
-
-	orion_gpio_set_valid_pins(0x0000000c);
-
-	platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
-	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-	orion_eth_init(&kurobox_pro_eth_data);
-	orion_sata_init(&kurobox_pro_sata_data);
-}
-
-MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-	.boot_params	= 0x00000100,
-	.init_machine	= kurobox_pro_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
-	.fixup		= tag_fixup_mem32,
-MACHINE_END